volume up isnt working. it is not the button mechanism along the bezel. its the board as i have put the mobo in 2 different frames besides the original n9005. how can this be repaired? i have searched online....nothing. any advice?
Related
Hello. I replaced the touchscreen.
when I switched. always up sound.
button is not pressed.
when they involve no housing. everything works.
when inserted into the housing problem
I dont really understand what your trying to say.. but if its what I think, then the housing you are using is either pressing on the up key and cuasing the volume to be 100% all the time, or the housing is incorrectly placed. Try taking the housing off and reapplying it.
When I wore body. volume itself increases.
When I turned it on without a body it is not happening.
I think that the body where it presses. but not on the button.
I collected body without buttons sound.
what my mistake???
Does anyone know where to find the internal volume button for the evo
my buddy has one i would like to fix but i cannot find them anywhere.
If not does anyone have one with water damage to the motherboard that they could unsolder the volume button off the main board?
Hi hoping someone can help me. I have tried to repair my Hd2 by changing the LCD and digitiser all in one, volume flex and the main button flex, obviously the phone has been completely dismantled.
I have changed the screen once before without too many problems. I finished and put it all back together, screen works a treat, but none of the buttons work. When I put in the battery in, the phone starts automatically (without pressing the power button, which isn't right) and boots to Magldr but none of the buttons work, none of the main buttons or the volume up or down works. Any ideas?
Have heard sometimes after changing some of the button flexes that the main board doesn't recognise them.
Sent from my Galaxy Nexus using xda premium
I dropped my phone today and the volume button is bent and unusable. I find a replacement button for the i9500. Do you all think it will fit in my I337? I believe it might. Here is the link to the button: http://www.http://rounded.com/samsung-i9500-galaxy-s-4-volume-button-silver.html
Thanks in advance.
I have a Samsung S4-GT I9505 with a volume up damaged or stuck key , so it always boots into recovery since the volume up is stuck and in order to get it boot I have to keep pressing on the volume down while it is booting .
I took my phone to many repair shops and no one knew how to fix this issue , I know that while I'm in the rom I can install any audio widget to get the volume up but to me this is not a solution .
please , if any one knows Samsung GT-I9505 volume key ways or any clue on how to fix this issue , kindly I ask you to provide me with your experience .
thanks alot in advance
Take the phone apart so you can see the motherboard, then reassemble the phone. Sometimes the buttons on the case get out of whack and press against the volume control buttons on the motherboard, causing this issue. If that doesn't work, replacing the motherboard may be your only alternative, as the buttons on the board are not user replaceable.
Strephon Alkhalikoi said:
Take the phone apart so you can see the motherboard, then reassemble the phone. Sometimes the buttons on the case get out of whack and press against the volume control buttons on the motherboard, causing this issue. If that doesn't work, replacing the motherboard may be your only alternative, as the buttons on the board are not user replaceable.
Click to expand...
Click to collapse
thanks for the reply , but I did took apart the phone many times and no success .
Then it's most likely the button on the board that has gone bad. I am presuming you tested the button on the board while you had the back off?