Database Users

[Q] NEED HELP!!!!! note 3 sm n900

good day,
i need help because my samsung sm n900 clone(chinaphone) is currently not opening or starting up(most probably bricked). and i dont have any back up.
before bricking i have a post, this is the only info i got
in AnTuTu:
BASIC INFO:
brand: samsung
model: samsung galaxy note3(sm-n900)
android: 4.2.2(32-bit) (but in about device it says 4.4.2)
cpu model: my6589
render: adreno(tm)330
resolution: 1080X1920
rear camera: 12.8 mega pixel 4128X3096
imei: xxxxxxxxxxxxxxx
STORAGE:
ram: total: 466mb / available: 74mb
system storage: total: 1.27gb / available: 0.95mb
internal storage: total: 1.26gb / available: 1.23gb
CPU:
cpu model; mt 6589
type: 32-bit
cores: 4
frequency: 300.00~2265.6 mhz
architecture: arm cortex-a7
DISPLAY:
render: adreno(tm)330
vender: qualcom
gpu version: opengl es 3.0 / [email protected] / [email protected]([email protected])
resolution: 1080X1920
density: 480 dpi
CAMERA:
rear camera: 12.8 mega pixel / 4128X3096
front facing camera: 2.1 mega pixel / 1920X1080
OS:
android: 4.2.2(32-bit) (but in about device it says 4.4.2)
android sdk version: 18(android 4.4.2)
kernel: linux version 3.4.0-1973843([email protected])(gcc version 4.7(gcc)) #1 smp preempt fri nov 15 14:22:43 kst 2013
if someone has the same device as my device please share your backup so i cant flash my device again.
what should i do. please help me in this problem.
thanks in advance

Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers, even its a clone of Note 3.
Stand by
Good luck

Need help!

Hi, my english isn´t very good but i hope you understand, here i go.
I buy a chinese Note 4 and i need help to find and flash a new room, these are my model info:
MediaTek MT6572 1.00 GHz
Cores: 2
Architecture: 2x ARM Cortex-A7 @ 1.00 GHz
Revision: r2p1
Process: 28nm
Clock Speed: 598 MHz - 1.00 GHz
GPU Vendor: Qualcomm
GPU Renderer: Adremo(TM)330
Scaling Governor: hotplug
Model: Samsung Galaxy Note 4 Duos (N9100)
Brand: samsung
Board: rtech72_we_72_kk
Hardware: mt6572
Screen Size: 5.70 inches
Screen Resolution: 540 x 960 pixels
Screen Density: 193 dpi
Dimensions: 153.5 x 78.6 x 8.5 mm
Weight: 175 g
Total RAM: 1860 MB
Internal Storage: 1.27 GB
Release Date: 2014-10-01
Android Version: 4.4.2
API Level: 19
Bootloader: unknown
Build ID: ALPS.KK1.MP6.V1
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Architecture: armv71
Kernel Version: 3.4.0-1273465(G900SKSU1AND3)
Root Access: No
Thanks for reading

I'm pretty sure that is not a Samsung Note 4....
Almost every line does not match the Samsung specs...

Need help to find a compatible recovery

Hi all,
I've bought a sympatic Android car autoradio on Android 4.4. I've succesfully rooted it via Kingroot, replaced by SuperSu, but I don't know where I can found a cimpatible CWM or other recovery.
Here is the specs of the tablet (via CPU-Z):
Cores: 4
Architecture: 4x ARM-Cortex A7 @ 1.60GHz
Revision: r0p3
Clock Speed: 166 MHz - 1.60 GHz
CPU 0: 1600 MHz
CPU 1: 1600 MHz
CPU 2: stopped
CPU 3: stopped
CPU Load: 5%
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
GPU Load: 0%
Scaling Governor: userspace
Model: AC8227
Manufacturer: ATC
Brand: Android
Board: Unknown
Hardware: autochipsac83xx
Screen Size: 7066,53 inches
Screen Resolution: 800x400 pixels
Screen Density: 0dpi
Toal RAM: 835MB
Available RAM: 196MB (23%)
Internal Storage: 0,29 GB
Available Storage: 0,17GB (58%)
Android Version: 4.4.4
API Level: 17
Bootloader: unknown
Build ID: JDQ39E.V3.10.02-20160711
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Architecture: armv71
Kernel Version: 3.4.35 (V3.10.02-20160711)
Root Access: Yes
System Uptime: 00:07:09
Click to expand...
Click to collapse
I need a recovery for flashing Gapps, principaly for the Play Store. simply install a Play Store apk doesn't work, install a modded version via Lucky Patcher does'nt work...
Have you any idea please?

Need help with identifying a new Headunit

Hey folks,
i've just bought a new Headunit and can't find any information about it. Maybe someone knows this type. This is what hardware-info says:
TS356XKUDO EVB3561SV_W_65_M0
SYSTEM (Android 6.0)
Model: evb3561sv_w_65_m0
Manufacturer: TS356XKUDO
Device: evb3561sv_w_65_m0
Product: full_evb3561sv_w_65_m0
Brand: alps
Android Version: 6.0
API Level: 23
Build ID: MRA58K
DISPLAY (1024x600)
Size: 1024x600
Refresh Rate: 57,44 Hz
Default Orientation: Landscape
Physical Size: 4,95" (12,56 cm)
Logical Size: Normal
Density: 240 dpi (High)
Pixels Per Inch: X: 240; Y: 240
PROCESSOR (AArch64)
Processor: AArch64 Processor rev 4 (aarch64)
Cores: 4
Max Frequency: 1248 Mhz
Instruction Sets: arm64-v8a,
SIMD Instructions: Not Supported
MEMORY (1901 MB)
System RAM: 1901 MB
JVM Max Memory: 128 MB
Internal Storage: 11266 MB
External Storage: 11266 MB (Emulated)
About device says:
MCU: TS907.170330

Same head unit
Hi.I have the same head unit.I also searching a different rom.Havr you find anything?

Me too, someone have an idea about rooting this unit ??

Update
Hello
please have a chance to update the TS356XKUDO software.
Has anyone already updated?
thx George.

I have a device having mcu: ts907.180712 and running with android v 6.0 showing model no. 8227l. can we install any custom recovery to backup the system in recovery mode and if yes please help in detail process

hppatro said:
I have a device having mcu: ts907.180712 and running with android v 6.0 showing model no. 8227l. can we install any custom recovery to backup the system in recovery mode and if yes please help in detail process
Click to expand...
Click to collapse
I have a very similar unit. In fact, as far as I can tell the specs are exactly the same.
The only difference being the manufacturer tag.
See here: https://forum.xda-developers.com/an...s/help-android-6-unit-identification-t3858386.

Need help with identifying unit

Hi guys, need help with a unit I have got.
Says it an android 10 but I don’t trust it as it come up with android 6 when installing apps from the play store.
Need help identifying what the actual unit is and what android firmware I can run on it.
how to root the device and fix a problem with the sd card not being able to be reformatted from photos etc to internal storage(don’t have the 3 dots to format)
Hmi:ZYHC.D.Q.3.05.11.16.08.30
Mcu: ts907.190518(H)
Media: hc_v2.0.0_190923_1100e(v1.40)
Btv: BT.19.11.12.1200
Many thanks
Edit:
Managed to pull this from droid info:
DROID INFO REPORT
DEVICE
Model: FF-5000 (FF-5000)
Manufacturer: alps
Baseband Version: Not Available
RIL Version: Not Available
Build Number: FF_8227L_10
Build Fingerprint: alps/full_8227L_demo/8227L_demo:8.1.0/O11019/1571038753:userdebug/test-keys
Bootloader: unknown
Java VM: ART 2.1.0
OS Version: O MR1 (10)
SDK: 27
DISPLAY
Resolution: 1024x600 pixels
Software Density: 240 dpi (hdpi)
Refresh Rate: 60 Hz
PROCESSOR
CPU Architecture: ARMv7 Processor rev 3 (v7l)
Board: unknown
Chipset: AC8227L
Cores: 4
Clock Speed: 598 MHz - 1118 MHz
Instruction Sets: armeabi-v7a, armeabi
CPU Features: half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
CPU Governor: interactive
Kernel Version: 3.18.79
Kernel Architecture: armv7l
GRAPHICS
Renderer: Mali-450 MP
Vendor: ARM
OpenGL Version: OpenGL ES 2.0
RAM
Total: 1950 MB
Java Heap: 192 MB
STORAGE
Internal: 12 GB
External: 58 GB
FEATURES
Bluetooth: Yes
Bluetooth LE: Yes
GPS: Yes
NFC: No
USB Accessory: Yes
WiFi: Yes
WiFi Direct: Yes
BATTERY
Technology:
Health: Good
SENSORS
Not Available