New Realme Update for x2 Pro : RMX1931EX_11_A.07Disclaimer :
Code:
* I'm not responsible for bricked devices or thermonuclear war
Changelog :
Camera :
● Optimized nightscape quality of rear camera
● Optimized camera quality of HDR
Display :
● Optimized 90Hz display logic
System :
● Fixed partial known issues, improved system stability
How to update ?
ONLY WITH OFFICIAL RECOVERY. This tutorial don't work with TWRP or other non official recovery
Notice:
Please back up your data before updating: Settings->Additional Settings->Back Up and Reset->Backup & Restore, select the Data to Be Backed up.
Please keep the battery level over 30%.
Please do not turn off your phone during the update process.
How to update?
1. Simple mode
- Transfer the firmware you downloaded to the phone storage
- go to the File Manager and find the firmware
- then click the firmware
- Update Now,and wait for the update to succeed.
2. Recovery Mode
- Transfer the firmware you downloaded to the phone storage or SD Card, then power off the phone. Press and hold the Power and Volume Down buttons, until your phone enters Recovery Mode.
- Choose the language you want
- Install from storage device,and find the firmware From phone storage
- Click on the firmware and confirm to update
Please do not perform other operations until your phone is updated successfully.
Download Link :
https://download.c.realme.com/osupdate/RMX1931EX_11_OTA_0070_all_pPnzkNE5pNia.ozip
Hi "updater process ended with ERROR:7" in TWRP recovery.
Thats for indian version, for europe version gives that error.
Best regards
neo9596 said:
Hi "updater process ended with ERROR:7" in TWRP recovery.
Thats for indian version, for europe version gives that error.
Best regards
Click to expand...
Click to collapse
Hi @neo9596
Unless I'm mistaken, Indian is Global Rom.
I update myself (Europe Phone buy on Realme Europe Website) using official update process (see first post). With locked bootlader, no problem at all for me.
I can't test with TWRP and/or unlocked bootloader.
Best regards
Hi, I test it error 7.
Best regards
neo9596 said:
Hi "updater process ended with ERROR:7" in TWRP recovery.
Thats for indian version, for europe version gives that error.
Best regards
Click to expand...
Click to collapse
you need to flash the recovery stock, then update and then put the twrp back, I have the twrp and I just updated
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
you need to flash the recovery stock, then update and then put the twrp back, I have the twrp and I just updated
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
Ok thanks, found recovery stock. I flash only recovery or boot too?
Thanks
Best regards
Are all languages included???
neo9596 said:
Ok thanks, found recovery stock. I flash only recovery or boot too?
Thanks
Best regards
Click to expand...
Click to collapse
but the beckmarchs are very low this update, so I go back to the previous one
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
but the beckmarchs are very low this update, so I go back to the previous one
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
Just ran an Antutu test just to see, benchmarks seem to be perfectly fine :good:
Duncan1982 said:
Just ran an Antutu test just to see, benchmarks seem to be perfectly fine :good:
Click to expand...
Click to collapse
Well, it has dropped me a lot [emoji848][emoji848]
Enviado desde mi RMX1931 mediante Tapatalk
Duncan1982 said:
Just ran an Antutu test just to see, benchmarks seem to be perfectly fine :good:
Click to expand...
Click to collapse
I know what happens for sure you don't have the latest update, install pp25 the Chinese app store and check the latest updates from antutu, which believes me has many new things and that's why yours detects you high bechmarks but they really aren't high
Enviado desde mi RMX1931 mediante Tapatalk
Duncan1982 said:
Just ran an Antutu test just to see, benchmarks seem to be perfectly fine :good:
Click to expand...
Click to collapse
latest version of antutu right now updated, and same test and see the results, a lot downloaded, install the latest version and do the test and you will see View attachment 4890571View attachment 4890573
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
latest version of antutu right now updated, and same test and see the results, a lot downloaded, install the latest version and do the test and you will see
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
Might be badly flashed update. Try flashing ozip once again.
What steps did you take to update? Through TWRP? Tell me what you did.
@ OP
Thanks for update.
Jerry08 said:
Might be badly flashed update. Try flashing ozip once again.
What steps did you take to update? Through TWRP? Tell me what you did.
@ OP
Thanks for update.
Click to expand...
Click to collapse
I installed the recovery stock and updated from the browser itself with the ozip, and then I started the tests and such and nothing you se, This is with the latest version of antutu 8.1.5 updated right now
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
I installed the recovery stock and updated from the browser itself with the ozip, and then I started the tests and such and nothing you se, This is with the latest version of antutu 8.1.5 updated right now
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
I flashed it through twrp. And all seems fine. Good update in my opinion, less glitches.
Jerry08 said:
I flashed it through twrp. And all seems fine. Good update in my opinion, less glitches.
Click to expand...
Click to collapse
Well, pass that antutu on 8.1.5 to see how it goes
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
Well, pass that antutu on 8.1.5 to see how it goes
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
Well I don't use those bs apps. It's just a rat race who will get higher number, lol. While doesn't reflect actual user experience. I only use PC Mark 2.0 for testing.
I have version A.06. can I update to A.07 with file manager without loosing my data, SMS, phone calls, and internal files?
Thanks.
almmpt said:
I have version A.06. can I update to A.07 with file manager without loosing my data, SMS, phone calls, and internal files?
Thanks.
Click to expand...
Click to collapse
Yes. But Backup before update is always a good idea...
lutherkingmartin said:
Yes. But Backup before update is always a good idea...
Click to expand...
Click to collapse
Thanks.
I updated to A.07 with file manager and everything runs very well.
Related
I've spent a pretty decent amount of time troubleshooting this myself. Probably wiped my phone and put the stock 4.3 on 20 times. If there is already a thread that solves this please point me in the right direction and I apologize for posting about the same issue. Anyway here is my problem.
I tried to put Paranoid Android on my Nexus 4. The specific version is this one here pa_mako-3.99-RC2-20130920. I booted the most updated 4.3 stock version from googles developers website. From what I read the stock 4.3 would have the most up to date radio. After the stock OS was installed I rooted my phone and installed Clock Work Recovery. Once that was done and was working properly I put pa_mako-3.99-RC2-20130920 as well as the most up to date gapps (pa_gapps-full-4.3-20131024-signed) into my phones memory and booted my phone into CWM recovery. I did a factory reset and wipe, installed the two zips and and then wiped the dalvik cache and continued to boot up my phone. When the phone boots everything seems to work properly except... No service.
Did I do anything wrong in my process? I have also tried to imput my carriers APN settings. What information do you need from me? Any ideas? Thanks guys.
Reflash the ROM. Do a system wipe first. Flash a radio if this doesnt work.
Enviado desde mi Nexus 4 mediante Tapatalk
luiseteyo said:
Reflash the ROM. Do a system wipe first. Flash a radio if this doesnt work.
Enviado desde mi Nexus 4 mediante Tapatalk
Click to expand...
Click to collapse
That's been done a blue million times. But I will go ahead and try again. I'll let you know the outcome. Do you have a link for a specific radio?
Update: Wiping the system and then reflashing the rom did nothing. Now updating the bootloader and radio from http://forum.xda-developers.com/showthread.php?t=2020336.
bobbyuhls said:
That's been done a blue million times. But I will go ahead and try again. I'll let you know the outcome. Do you have a link for a specific radio?
Update: Wiping the system and then reflashing the rom did nothing. Now updating the bootloader and radio from http://forum.xda-developers.com/showthread.php?t=2020336.
Click to expand...
Click to collapse
This is very weird... After upgrading to 4.3 using the factory image the bl and the radio get upgraded toó... Yes, let me know and i will try to help.
Is it working in stock 4.3?
Enviado desde mi Nexus 4 mediante Tapatalk
luiseteyo said:
This is very weird... After upgrading to 4.3 using the factory image the bl and the radio get upgraded toó... Yes, let me know and i will try to help.
Is it working in stock 4.3?
Enviado desde mi Nexus 4 mediante Tapatalk
Click to expand...
Click to collapse
With the stock 4.3 everything works perfectly.
bobbyuhls said:
With the stock 4.3 everything works perfectly.
Click to expand...
Click to collapse
Try redownloading the ROM...this is strange. Any success with the radio flashing?
Enviado desde mi Nexus 4 mediante Tapatalk
luiseteyo said:
Try redownloading the ROM...this is strange. Any success with the radio flashing?
Enviado desde mi Nexus 4 mediante Tapatalk
Click to expand...
Click to collapse
Ok I'll redownload the rom. And no the flashing of the radio did nothing either. I even imput my carries apn settings again. I hit save after entering in the settings and the phone didn't even save the settings.
Are you on an old version of CWM? 4.3 brings SELinux and you may be seeing permissions issues that's preventing you from being able to access the baseband (check under settings)
After redownloading the PA rom and flashing it from the stock 4.3 I have a working up to date version of the PA 3.99 R2. Thanks for the help guys.
Android Lollipop 5.1 SOAK TEST TWRP BACKUPIt's done, here we go. and before you start, remember to update your TWRP to the latest version.
Okay guys, as promised, here is the complete 5.1 cleaned up BACKUP...
Instructions:
1. Download it.
2. Extract it.
3. Move to your Internal Storage or External.
4. Restore it.
For Brazilian or Argentina users, go to bootloader a.k.a fastboot and flash this, will fix the SIM problem.If any india user is having problem with SIM, here is the india baseband.
Sorry by the poor OP, but i was in hurry
Just to warn, THIS WILL NOT WORK WITH CWM!!!!If the backup isn't showing on the list do this, go to the extracted zip, put your serial number on the third folder of the backup (TWRP/BACKUP/<yourserialnumber>/2015-06-16--09-03-35_LPC23.13-34/) how do i know my serial number? go to about phone or in bootloader and get your serial number...Works fine on XT1021 (thanks to @Carlos Arriaga) and XT1022.Credits for the OTA: Saurabh Sinha
And if you want to remove all the bloatware from the 5.1 stock, here is the solution, just flash this (all bloatware script thanks to @Carlos Arriaga)
Here is the link!
1. Download it.
2. Move to your internal or external
3. Flash it like a normal flashable zip.
jonaaa said:
Okay, listen up! i'm uploading on Drive my cleaned 5.1 backup... it will take some hours, it should fix these '7MB update' problems and for brazilian and argentina users, i have some basebands that should work with you too... for indian users, should work... keep that in mind that my Moto E is XT1022 and i don't know if this will work on XT1021... so, please, wait...
http://i.imgur.com/uCe6hOD.png
It's on another language but, my internet isn't that fast so, it will take some time. i think tonight will be ready (I THINK.)
Click to expand...
Click to collapse
Waiting buddy. All the best.
@jonaaa great man will try
It will mess baseband?
Okay guys, it's done. i think it will not mess with baseband... but anyway, i'll let the indian baseband in case of problems... i'll upload soon.
@jonaaa so now im on AOSP 5.1.1 now after wiping dalvik,data,cache can i restore Stock 5.1 via twrp .....
vinay001 said:
@jonaaa so now im on AOSP 5.1.1 now after wiping dalvik,data,cache can i restore Stock 5.1 via twrp .....
Click to expand...
Click to collapse
Yes
vinay001 said:
@jonaaa so now im on AOSP 5.1.1 now after wiping dalvik,data,cache can i restore Stock 5.1 via twrp .....
Click to expand...
Click to collapse
Yes, and if someone could post some screenshots, i will attach on OP.
@jonaaa and @Adarsh1998 downloading guys it's slow here internet
vinay001 said:
@jonaaa and @Adarsh1998 downloading guys it's slow here internet
Click to expand...
Click to collapse
Okay, download it and say if it works.
Downloading. Will report.
i never updated to 5.0.2 stock rom..so i have kitkat bootloader and radio drivers...will this work?because bootloader and radio got updated in lollipop...others might have the same question too.
Sent from my Moto E using Tapatalk
Faiz Syed said:
i never updated to 5.0.2 stock rom..so i have kitkat bootloader and radio drivers...will this work?because bootloader and radio got updated in lollipop...others might have the same question too.
Sent from my Moto E using Tapatalk
Click to expand...
Click to collapse
Well, you will only know if you test it, because i have LP bootloader... i don't know if it will work or not on KK bootloader.
This backup is only for XT1022?
bioly87 said:
This backup is only for XT1022?
Click to expand...
Click to collapse
Well, i tested on XT1022... don't know if it works on XT1021.
@jonaaa have u seen one for xt1025? im looking so hard for it
Enviado de meu condor usando Tapatalk
DAVI FELICIANO said:
@jonaaa have u seen one for xt1025? im looking so hard for it
Enviado de meu condor usando Tapatalk
Click to expand...
Click to collapse
I think the only difference from xt1025 to xt1022 is the TV. but, i think it will work but the TV will not be available.
jonaaa said:
I think the only difference from xt1025 to xt1022 is the TV. but, i think it will work but the TV will not be available.
Click to expand...
Click to collapse
just one question, if i go back to 4.4.4 stock and stock recovery and enter in MFN will i receive it right now? or just the people that was MFN member before receive it?
Enviado de meu condor usando Tapatalk
DAVI FELICIANO said:
just one question, if i go back to 4.4.4 stock and stock recovery and enter in MFN will i receive it right now? or just the people that was MFN member before receive it?
Enviado de meu condor usando Tapatalk
Click to expand...
Click to collapse
Just only users are receiving this OTA, if you're lucky, you'll receive, but i can't guarantee this...
jonaaa said:
Just only users are receiving this OTA, if you're lucky, you'll receive, but i can't guarantee this...
Click to expand...
Click to collapse
Im on soak 5.0.2 and im in MFN now can i be choosen or i miss something?
Enviado de meu XT1025 usando Tapatalk
Hello. First I would like to say that I am running stock nougat on my phone. Version 137-78-4. The thing is I would like to emigrate to custom roms now but I want to be able to re stock and most importantly relock bootloader in case I have to. I cannot find a stock firmware for the version I'm running but Early versions and that would hard brick my phone. So what firmware should I use for my software version if I would like to relock my phone and come back to stock?.
Samerhk said:
Hello. First I would like to say that I am running stock nougat on my phone. Version 137-78-4. The thing is I would like to emigrate to custom roms now but I want to be able to re stock and most importantly relock bootloader in case I have to. I cannot find a stock firmware for the version I'm running but Early versions and that would hard brick my phone. So what firmware should I use for my software version if I would like to relock my phone and come back to stock?.
Click to expand...
Click to collapse
There you have
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Mirror
https://mega.nz/#!AANEXDTa!aGTj_RFDk9ml2gdyZcFYH-cWc7EgVJ70Wzf8AH9jur
Enviado desde mi Moto G (5) Plus mediante Tapatalk
JackassBQ said:
There you have
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
If don't work, use a proxy.
Enviado desde mi Moto G (5) Plus mediante Tapatalk
Click to expand...
Click to collapse
Thank you for your answer. What proxy would you recommended?
how to download it
JackassBQ said:
There you have
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
If don't work, use a proxy.
Enviado desde mi Moto G (5) Plus mediante Tapatalk
Click to expand...
Click to collapse
sorry to re ask you this again. but i was not able to download from this site. tried every proxy and every vpn and still able. i really need help here. please.
I have a NANDroid made with TWRP ran with fastboot (ie. I didn't flash TWRP) if you're interested.
I restored from it and it looks like all the partitions are the stock ones, I was worried mainly about recovery and/or boot being somehow overridden by TWRP (it shouldn't have, but just in case).
The backup is for the XT1680 customized for Telcel (Mexico). It has some bloatware apps, but all of them except one allow uninstalling and the remaining one you can just disable/freeze.
Let me know if you want me to upload it.
Samerhk said:
sorry to re ask you this again. but i was not able to download from this site. tried every proxy and every vpn and still able. i really need help here. please.
Click to expand...
Click to collapse
Added Mega mirror.
Enviado desde mi Moto G (5) Plus mediante Tapatalk
JackassBQ said:
Added Mega mirror.
Enviado desde mi Moto G (5) Plus mediante Tapatalk
Click to expand...
Click to collapse
hello, it asks me for an encryption code
Try again.
Enviado desde mi Moto G (5) Plus mediante Tapatalk
jhonyrod said:
I have a NANDroid made with TWRP ran with fastboot (ie. I didn't flash TWRP) if you're interested.
I restored from it and it looks like all the partitions are the stock ones, I was worried mainly about recovery and/or boot being somehow overridden by TWRP (it shouldn't have, but just in case).
The backup is for the XT1680 customized for Telcel (Mexico). It has some bloatware apps, but all of them except one allow uninstalling and the remaining one you can just disable/freeze.
Let me know if you want me to upload it.
Click to expand...
Click to collapse
Hey there!
If you don't mind, I'd like a download to this.
Thanks!
someone have the complete firmware until the security updates of this month January 2019? for this model in telcel? I'm hurting the software and I can not recover the phone I try to put other firmware but it does not leave me mark error
Need help restoring stock backup image in Magisk,error "stock backup does not exist!"
I'm trying to get the newest January update for my Magisk rooted A1. But as im trying to restore my original backup i encounter the "stock backup image does not exist!" error in the Magisk Manager app. Please help me solve this problem thoroughly as i am an amateur. Thanks!
You have to download and flash the stock boot of December or the version you are.
Enviado desde mi Mi A1 mediante Tapatalk
AridaneAM said:
You have to download and flash the stock boot of December or the version you are.
Enviado desde mi Mi A1 mediante Tapatalk
Click to expand...
Click to collapse
Where do i download the december boot.img and how do i flash it? Can i put it in magisk's backup boot.img directory and if so where do i put it exactly?
arief0303 said:
Where do i download the december boot.img and how do i flash it? Can i put it in magisk's backup boot.img directory and if so where do i put it exactly?
Click to expand...
Click to collapse
You can search in forums or download your complete ROM. I think that is easier flash complete January ROM keeping userdata and you will directly with update and without root.
Enviado desde mi Mi A1 mediante Tapatalk
...
Hi. I rooted my Samsung S10 plus G975F and now want to remove bootloader/root warning logo at start. I was unable to find the BL file for S10 plus on this forum hence requesting help. I'm not a super user hence will really appreciate if steps could be shared on how to do it. Thanks
It's not my work.. it's from SoldieR9312, works good, found this solution here on xda., flash in twrpView attachment G97X_Splash_Screen_Changer_by_SoLdieR9312_splash.zip
Enviado desde mi SM-G975F mediante Tapatalk
hleo114312 said:
It's not my work.. it's from SoldieR9312, works good, found this solution here on xda., flash in twrpView attachment 4983141
Enviado desde mi SM-G975F mediante Tapatalk
Click to expand...
Click to collapse
When I installed LineageOS I followed the instructions on the LineageOS website and so I ended up with the LineageOS recovery instead of TWRP.
Is there any way to flash this with the LineageOS recovery instead of TWRP?