Hello,
I need advice where to get new firmware for smart watches:
Model: Sport_LE S929, brand sSenbono S929 / Makibes G08 - all brands should be one and the same.
The watch is still working, but it shows errors (reset to default every day, 24-hour mode does not work, sometimes GPS data synchronization is not possible).
Makibes does not respond to emails, SSenobono says they have no firmware.
Thank you.
Related
Among a large and growing number of frustrations I have with my 9100 after only a day of use is that POP3 e-mail sending & receiving does not work correctly when the device is in standby.
It all works ok while the device is on (via either of WLAN or GPRS), but when in standby, nothing sends or receives.
I had a vaguely similar problem with my XDA II before, which was that in standby it operated so slowly that it would take 5 minutes just to connect, log in and lot out (i.e., even if there were no messages to collect).
Other pressing problems with the 9100 include:
- extremely poor Skype performance (even with the v1.2 Beta)
- device frequently crashes (esp. coming out of stand-by)
- no back-up support with ActiveSync 4.1
I've done any number of hard resets to no avail.
Perhaps there is a less buggy ROM than the one I have (1.1.9.3 / 16 Sep 05)? If so, where would I get that and how would I go about installing it (in simple steps, please!)?
Any help would be greatly appreciated! I'm nearing the point where I just send the unit back...
Even if nobody can help ...b
Even if nobody can help, I'd love to know if others have had the same issues?
I'm also having problems with the device regularly crashing when I bring it out of standby. Not sure, but this may be related to the Wireless LAN attempting to connect (it works fine while the unit's on).
A --> have others found the Wizard with 1.1.9.3 to be stable?
B --> have others had problems with GPRS send/receive in stand-by mode?
I remember why I sold my original Optimus 7 now, I bought a new one yesterday as it was on offer, but for the life of me I can't get location services to work, my iPhone instantly find me, this phone just sits searching and gives and error it can't find me. It seems to be using GPS which when in doors isn't going to find me, it doesn't seem to use WiFi or Cell Towers. Outside its hit and miss if it finds me. I'd say it was a dodgy phone if the original phone I had didn't have the same problems.
Anyone any ideas? Its not that the location is off a bit, it just simply can't find me via wifi or cell
Vodafone's Optimus 7 firmware is broken - I worked out this works:
In MFG, navigate to Engineer Menu / Device Test / Sensor Test / GPS Test / GPS Setting
In User Setting, use following values:
Operation Mode: MS-Based
Accuracy: 100
Aiding Data: Hot Start
Auto Answer: Disable
Interval: 1
Number of Fixes: 9999999
Intermediate Data: On
In System Setting:
URL: supl.google.com:7276
Posnode: 255
2G: Loc Estimate
3G: Loc Estimate
Use Security: Use Security
MO Method: User Plane
PLEASE sign up on the Vodafone e-forum to add your voice to the request to get this fixed on this thread:
http://forum.vodafone.co.uk/t5/Othe.../GPS-Fails-after-WP7-Mango-Update/td-p/872141
Thanks
Thanks for this, Going to flash a generic European ROM and see what happens
Not working for me.
LG E900 Vodafone
I flashed the unbranded European ROM and they still don't work. I am thinking it a bug with all E900 phones.
Tried Nokia maps and it found me instantly in the house, The Weather Channel also found me instantly, so I think it all comes down to the app.
Good day,
I have a smartwatch - U8 clone - you can google for Eboda Smart Time 100 as I am not allowed to post URLs yet . Not identical with the original U8 but very close - this is not relevant.
I am pairing it with my Gionee Elife E5 (Android 4.2.1) - it connects easily, can receive calls and text messages but there is a big issue when the phone is set to 3G (WCDMA)mode. When I receive a call and I answer (from the phone or the watch) or when I make a call (from the phone or the watch) the phone loses the signal (the SIM signa, not the bluetooth signall) with the message Radio Off. In a few seconds the signal comes back - but obviously this is no help because I cannot use the phone when the watch is connected.
The most interesting part is that there are NO issues when setting the phone to GSM mode. When the watch is disconnected, I can use the phone on 3G with no problems.
I paired the watch with another phone (based on MT 6572A with Android 4.4) and it works perfectly when the phone is on 3G.
Any ideas are greatly appreciated.
Hi everyone,
I am a new user of a Huawei P10 Lite and I have some question regarding his functioning:
- I have noticed that this smartphone is equipped with a WiFi +. How does it work ?
Cause it does not choose between WiFi and 4G. Do I need to switch ON everytime WiFi + 4G ?
- Do you have a solution to switch ON the screen (when it is OFF) by doing something like a double tap on a screen ?
- If I need to switch OFF the screen (when it is ON), beside pushing the ON/OFF button, are there any solution to switch it OFF ?
- When I install a new apps, can I record/transfert it to the SD card ?
- If I have 2 sim card, does both card work at the same time or one is working and the other is off and need to choose it ?
- On my previous Samsung A3 2015 with Outlook e-mail app, when I received an e-mail and was connected to the Internet, I immediately received a notification. Can I do it the same on the Huawei ? Like an automatic synchronization (but not doing a push every 10 min and so on...just receiving it immediately) ?
Thanks for your help !!!
Hi i get my head unit from AliExpress. First half year working perfect. I use hot spot from my phone and got connected my radio to internet. And later my battery is dead and when I connect new one my Wi-Fi in radio will be broken. when I try turn on is “on” position around 5sec and automatic turn off. Start showing communication about Bluetooth have error and I got options only for “stop” app.
I contact with seller and send me update. Give me all instruction how install new update (local update / wipe data format flash) I done everything but Wi-Fi still not working and Bluetooth still have problem.
I found new android 10 on this site and update again but still nothing help.
So I think my next step clear everything with SP Flash tool but I need little bit help for you. I reading little bit about that but I don’t know what I need download and from where. Will be great if you give me a hand with that. I send pictures from “about” for more help. Thank you for your time