Database Users

Where to start ?....soft bricked S4.... unknow delaer/firmware :-[

Hi folks!!!
I know is very annoying this question....
But already look in a lot of forums in XDA, but without luck....
So I first start with my background about restoring and flashing devices.....
MY first flashing device was a Galaxy S1 with Cyanogenmod.
Later a flash 1 Galaxy Young, and after I fixed a different and default random soft bricked Galaxy Young.
My last flashed device was a S5 with LineageOS 3/4 months ago....
Im did so installing CWM when was possible, using Odin , or ADB....from Linux and W$.....
Until I get lost my last phone Galaxy S5...
So I had to buy a 2° hand phone quickly....he was working OK... for a while ....the time has passed and become more and more slowly....so I decided to make a reset factory .......very BAD IDEA... I didn't take build information....just the model...GT-I9500....
The same info appears in the Odin download Mode....
But there is no tag with SN, and IMEI neither on the back... :'-(
So I get stuck in the Download mode ...but there IS NOT TAG about ODIN mode in this screen.....at least if
unplug the battery, and restart the phone holding PWR+HOME+VOL. DOWN .
[ EDIT ]
Trying to flash stock firmware with Kies ( who request a valid SN, what I take from web ) in the next models
GT-I9505
GT-I9500
give me this message ( in spanish =) ) ==> "este modelo no admite la inicializaciòn" , which means " this model cannot be initialized" .
[ end EDIT ]
I also tried smash (softly...covering with a canvas ) the power button...but without luck...
Seems like the phone is factory locked..... what I had read may be by AT&T or Verizon....any way to know which dealer?
Any idea or recomendation where to start ???
Its ( maybe ) JTAG cable the ONLY way/solution to fix this, or even this is NOT a solution...?
I will waiting for your answers....
TIA
PS: sorry if I made some mistakes with the english

Odin doesn't recognize the phone?

Rhoban said:
Odin doesn't recognize the phone?
Click to expand...
Click to collapse
Hello Rhoban, and thanks for your reply!!!!
and YES, Odin recognize the phone, the flash result is PASS, but the phone continues stucked on the same "Download" screen...
Because I dont have SN and IMEI neither, I dont know which ROM to flash..
After tryed to reset factory whithout luck, I tried to flash lineage, without any result.
Also because I cant unlock bootloader, I supposed to the phone was from Verizon or AT&T.
I tried to flash this ROMS's , setting the image on AP field from Odin
Verizon
I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5
I545VRUDMI1_I545VZWDMI1_I545VRUDMI1_HOME.tar.md5
From doidview ==> I545VRUGOC1_I545VZWGOC1_I545VRUGOC1_HOME.tar.md5
also i tried to flash the next PIT files and same result...nothing changed
SCH-I545.pit
SGS-I337_16GB.pit
adonis.pit
an this bootchain and bootloaders setting up on BL tab:
I545_OC1_Stock_Kernel.tar.md5
NB1-Boot.tar.md5
VRALEC.bootchain.tar.md5
From droidviews.com ==>
I545_NC5_Stock_Kernel.tar.md5
I545_NG6_Stock_Kernel.tar.md5
I know all above is a mess , but the list is the most detailed I can :silly:
thanks again!!!!
PS: I want to put the source link where I take the kernel images and ROM's , but because I'm newbie
( --- ALL new users prevented from posting outside links in their messages. ----), I can't

X00D45 said:
Hello Rhoban, and thanks for your reply!!!!
and YES, Odin recognize the phone, the flash result is PASS, but the phone continues stucked on the same "Download" screen...
Because I dont have SN and IMEI neither, I dont know which ROM to flash.
Click to expand...
Click to collapse
Hi, the same download screen before you started flashing? Do you have "no reboot" ticked? (Heimdall user sorry) After pass just restart the phone and wait 10 min or so.
Also because I cant unlock bootloader, I supposed to the phone was from Verizon or AT&T.
Click to expand...
Click to collapse
Never read into this, but resources are there( Seen some topic titles), there is hope for Verizon and AT&T users.
also i tried to flash the next PIT files and same result...nothing changed
SCH-I545.pit
SGS-I337_16GB.pit
adonis.pit
Click to expand...
Click to collapse
Did you have a backup? Flashing the wrong pit file might hardbrick your phone. I guess the above where blocked bij Odin (Lucky you).
In short:
Connect your phone in download mode> open Odin> click PDA or AP > Select the stock firmware > start.

You mentioned your device being a GT-I9500, but the ROMs you said you have downloaded are for I545 and I337, both of which are Snapdragon models. The GT-I9500 is the Exynos model.
So that may be your problem.

Thanks LexHimself for your advices! I had backed up already the contacts and pics.
and thanks Rhoban ....for you suggest I have to start again from the beggining, looking for the rigth ROM for my device... so thanks for put spot on the processor model !!!!
So I gonna start again, looking for the right ROMS...
I will post as soon has news about flashing Exynos rom´s....
thanks guys!!!

[SOLVED] !!!!
Hello guys!!!!
As Rhoban point me, I have to look for the right recover image ,and ROM for my phone GT-I9500, with Exynos processor, who has code JA3G, so with that code I can address well .
So I download this recovery image "philz_touch_6.12.8-i9500.tar.md5", and after install, I download and install the right LineageOS ROM for my system.....
but this would not have happened, if I would started for look for the processor model as FIRST STEP...
so THANKS SO MUCH RHOBAN, and thanks LexHimself for your advices!!!!
??????
Cheers!!!!

What firmware files do I need to complete reflash my Note 4 SM-N910F?

I got a bricked Samsung Galaxy Note 4 (910F) vodafone branded.
it's totally broken I can't start it, can't go into recovery (the hardware buttons are OK).
I can only go into download mode.
tried flashing everything with odin back to stock. followed many different instructions and now I'm lost.
can someone tell me what exact files I need?
I think I have the right firmware downloaded BUT what about the bootloader? on sammobile under germany-vodafone there are so many different versions which one shall I choose?
AND: Do I need CSC? if so which one and where to find? Couldn't find it on sammobile.
And am I right with putting the bootloader under BL, the firmware under AP, the CP (whatever this is) under CP, the csc under csc?
repartition unchecked as I read somewhere.
I still don't understand what this "pit" file is for and I'm not sure if I have the right one.. never had a phone with sooo many different firmware files..
I'm used to flash via fastboot "recovery.img, boot.img, system.img" odin is a new thing for me
HELP PLEASEEE :'(
the reactivation lock is on.

nekrosmsk said:
I got a bricked Samsung Galaxy Note 4 (910F) vodafone branded.
it's totally broken I can't start it, can't go into recovery (the hardware buttons are OK).
I can only go into download mode.
tried flashing everything with odin back to stock. followed many different instructions and now I'm lost.
can someone tell me what exact files I need?
I think I have the right firmware downloaded BUT what about the bootloader? on sammobile under germany-vodafone there are so many different versions which one shall I choose?
AND: Do I need CSC? if so which one and where to find? Couldn't find it on sammobile.
And am I right with putting the bootloader under BL, the firmware under AP, the CP (whatever this is) under CP, the csc under csc?
repartition unchecked as I read somewhere.
I still don't understand what this "pit" file is for and I'm not sure if I have the right one.. never had a phone with sooo many different firmware files..
I'm used to flash via fastboot "recovery.img, boot.img, system.img" odin is a new thing for me
HELP PLEASEEE :'(
the reactivation lock is on.
Click to expand...
Click to collapse
The note 4 firmware is usually only 1 file that contains all you need. It contains the bootloader and CSC that you pick during download. Just pick the CSC for your country.
This is unless you get a 4 file repair firmware, which contains separate bootloader, system, and CSC files.
The pit file is only needed to repartition your device.
But with all off that aside, you state that your activation lock is activated. These means the phone was password protected.
If you tell me your country, I can at least point you to the correct firmware. So at least you'll know you got the correct one.
But as far as the activation lock, I can't help with that. "Google"
Edit. I now see you mentioned Germany Voda.
So here's the most current firmware for your device.
https://fws03.updato.com/GALAXYNOTE4/SM-N910F/TCL/SM-N910F_1_20171228192640_l5rw6mqv67.zip
Download and unzip.
Then if it's just 1 file that's .md5 then you put it in AP slot.
If it's 4 files put them in appropriate slots.

aaron74 said:
The note 4 firmware is usually only 1 file that contains all you need. It contains the bootloader and CSC that you pick during download. Just pick the CSC for your country.
This is unless you get a 4 file repair firmware, which contains separate bootloader, system, and CSC files.
The pit file is only needed to repartition your device.
But with all off that aside, you state that your activation lock is activated. These means the phone was password protected.
If you tell me your country, I can at least point you to the correct firmware. So at least you'll know you got the correct one.
But as far as the activation lock, I can't help with that. "Google"
Edit. I now see you mentioned Germany Voda.
So here's the most current firmware for your device.
https://fws03.updato.com/GALAXYNOTE4/SM-N910F/TCL/SM-N910F_1_20171228192640_l5rw6mqv67.zip
Download and unzip.
Then if it's just 1 file that's .md5 then you put it in AP slot.
If it's 4 files put them in appropriate slots.
Click to expand...
Click to collapse
This reactivation lock doesn't matter I found a solution how to bypass it when the phone is set up running android.
my question is, is it possible to flash firmware to the note4 at all with reactivation lock on? Or is that just an android thingy?
And yes please that would be nice if you show me the right firmware.
My model:
N910F GSMH
I believe it is vodafone branded because when it once worked it showed a vodafone logo while starting up.
my country is Germany.
I hope thats enough info :/

nekrosmsk said:
This reactivation lock doesn't matter I found a solution how to bypass it when the phone is set up running android.
my question is, is it possible to flash firmware to the note4 at all with reactivation lock on? Or is that just an android thingy?
And yes please that would be nice if you show me the right firmware.
My model:
N910F GSMH
I believe it is vodafone branded because when it once worked it showed a vodafone logo while starting up.
my country is Germany.
I hope thats enough info :/
Click to expand...
Click to collapse
I believe it should still flash with lock. If it isn't flashing something is wrong.
If you can't get Odin to flash that firmware try this and see what happens.
Download TWRP and flash it. Can you boot into recovery then? If so download a custom rom and flash it and see what happens.
TWRP: https://eu.dl.twrp.me/trlte/twrp-3.2.1-0-trlte.img.tar
Do you have Samsung drivers installed on PC? http://developer.samsung.com/common/download/check.do?actId=698
Do you have a good Odin? https://dl.sammobile.com/Odin3-v3.13.1.zip

aaron74 said:
I believe it should still flash with lock. If it isn't flashing something is wrong.
If you can't get Odin to flash that firmware try this and see what happens.
Download TWRP and flash it. Can you boot into recovery then? If so download a custom rom and flash it and see what happens.
TWRP: https://eu.dl.twrp.me/trlte/twrp-3.2.1-0-trlte.img.tar
Do you have Samsung drivers installed on PC? http://developer.samsung.com/common/download/check.do?actId=698
Do you have a good Odin? https://dl.sammobile.com/Odin3-v3.13.1.zip
Click to expand...
Click to collapse
I have the right latest samsung drivers installed yes.
I have the Odin version you just sent a link of. ( I also tried different older versions but no success).
I can't boot into recovery doesn't work. the hardware buttons are 100% working as I have to press vol+ to confirm to go into download mode.
I tried flashing TWRP and CWM both didn't work "custom recovery blocked by A/L error".
I can successfully flash firmware with Odin. It says "PASS" and then the phone reboots and is stuck on Samsung Logo. and sometimes it just shows blue text "recovery booting" but is stuck. nothing happens.

nekrosmsk said:
This reactivation lock doesn't matter I found a solution how to bypass it when the phone is set up running android.
my question is, is it possible to flash firmware to the note4 at all with reactivation lock on? Or is that just an android thingy?
And yes please that would be nice if you show me the right firmware.
My model:
N910F GSMH
I believe it is vodafone branded because when it once worked it showed a vodafone logo while starting up.
my country is Germany.
I hope thats enough info :/
Click to expand...
Click to collapse
Hey sorry the link you've sent doesn't work :/

aaron74 said:
The note 4 firmware is usually only 1 file that contains all you need. It contains the bootloader and CSC that you pick during download. Just pick the CSC for your country.
This is unless you get a 4 file repair firmware, which contains separate bootloader, system, and CSC files.
The pit file is only needed to repartition your device.
But with all off that aside, you state that your activation lock is activated. These means the phone was password protected.
If you tell me your country, I can at least point you to the correct firmware. So at least you'll know you got the correct one.
But as far as the activation lock, I can't help with that. "Google"
Edit. I now see you mentioned Germany Voda.
So here's the most current firmware for your device.
https://fws03.updato.com/GALAXYNOTE4/SM-N910F/TCL/SM-N910F_1_20171228192640_l5rw6mqv67.zip
Download and unzip.
Then if it's just 1 file that's .md5 then you put it in AP slot.
If it's 4 files put them in appropriate slots.
Click to expand...
Click to collapse
hey thanks in advance, but this link doesnt work it says "hotlinking is not cool". anyways I searched the firmware for my model number on this site and applied the "germany vodafone" filter. but there are still soo many different entries which one shall I choose? The latest date?

nekrosmsk said:
hey thanks in advance, but this link doesnt work it says "hotlinking is not cool". anyways I searched the firmware for my model number on this site and applied the "germany vodafone" filter. but there are still soo many different entries which one shall I choose? The latest date?
Click to expand...
Click to collapse
Here's webpage
https://updato.com/firmware-archive-select-model?record=58770125168D11E89F15FA163EE8F90B
After you flash, how long are you waiting for it to boot?
Sometimes it takes awhile.

aaron74 said:
Here's webpage
https://updato.com/firmware-archive-select-model?record=58770125168D11E89F15FA163EE8F90B
After you flash, how long are you waiting for it to boot?
Sometimes it takes awhile.
Click to expand...
Click to collapse
Thanks for the link I'm downloading.
After flashing odin says PASS and my note 4 reboots. then there are 2 cases which in my view appear randomly. Either it shows the samsung logo and is stuck.
OR it shows the samsung logo and a blue little text in the upper left corner saying "recovery booting" and is stuck. I waited like 5 minutes. shall I wait longer? :/ hm..I'll try
OH and sometimes the screen just goes black idk if it really turns off after getting stuck on samsung logo.

Pull the battery, leave it out for 10+ minutes
Put battery back in
Boot to download mode (Power + Vol Down + Home)
Then try (re)flashing stock ROM via odin, i would try the earliest you can find to have the best chance, you can always flash a later one if you get it running
Better range of ROMS from sammobile, i never use updato for that reason: https://www.sammobile.com/firmwares/galaxy-note4/SM-N910F/VD2/
If none of that works, then its likely you have a hardware fault ...emmc or other

stylemessiah said:
Pull the battery, leave it out for 10+ minutes
Put battery back in
Boot to download mode (Power + Vol Down + Home)
Then try (re)flashing stock ROM via odin, i would try the earliest you can find to have the best chance, you can always flash a later one if you get it running
Better range of ROMS from sammobile, i never use updato for that reason: https://www.sammobile.com/firmwares/galaxy-note4/SM-N910F/VD2/
If none of that works, then its likely you have a hardware fault ...emmc or other
Click to expand...
Click to collapse
So I tried flashing. after flashing OH WONDER it said recovery booting and then it showed this green android logo thing with a rotating icon in it "you know what I mean" but then it stopped and just turned off.. I could freak out really.. I tried flashing again. same issue. I could then press the recovery mode key combo to get into this rotating android logo screen but everytime it just freezes and turns off. yes the battery is fully charged before I started flashing this firmware now. I flashed the one u said the earliest. So Now I tried the one the other guy here showed me. didn't work either. it just gets stuck at samsung logo. I found a repair firmware for my model containing (pit, bl, ap, cp, csc and odin) I flashed all but odin fails "write error". I then tried odin v3.0.7 but then it got stuck while flashing the system image. I waited like 1 hour. nothing. tried it again. nothing it freezes on the same position. I then tried the same on the latest versions of odin v3.12.3, 3.12.7 and on 3.13.1 but it also freezes on system.img.ext4 image flashing..

nekrosmsk said:
So I tried flashing. after flashing OH WONDER it said recovery booting and then it showed this green android logo thing with a rotating icon in it "you know what I mean" but then it stopped and just turned off.. I could freak out really.. I tried flashing again. same issue. I could then press the recovery mode key combo to get into this rotating android logo screen but everytime it just freezes and turns off. yes the battery is fully charged before I started flashing this firmware now. I flashed the one u said the earliest. So Now I tried the one the other guy here showed me. didn't work either. it just gets stuck at samsung logo. I found a repair firmware for my model containing (pit, bl, ap, cp, csc and odin) I flashed all but odin fails "write error". I then tried odin v3.0.7 but then it got stuck while flashing the system image. I waited like 1 hour. nothing. tried it again. nothing it freezes on the same position. I then tried the same on the latest versions of odin v3.12.3, 3.12.7 and on 3.13.1 but it also freezes on system.img.ext4 image flashing..
Click to expand...
Click to collapse
Try the Samsung Smart Switch for PC - like this : https://www.youtube.com/watch?v=9QhJngOuLQ4&t=337s
Good luck, maybe it will work - for me it did work for the 910C.

w41ru5 said:
Try the Samsung Smart Switch for PC - like this : https://www.youtube.com/watch?v=9QhJngOuLQ4&t=337s
Good luck, maybe it will work - for me it did work for the 910C.
Click to expand...
Click to collapse
doesnt work. I tried several versions of smartswitch AND samsung kies. nothing works it always says my model is not supported. I reinstalled drivers. tried on another pc. tried another usb port. yes I'm using the original stock usb cable. model not supported. But I've also read that in other threads that the 910F model seems to be unknown by kies or smartswitch. I'm rly starting to hate samsung now. I have never ever had so many problems with flashing and so on.

nekrosmsk said:
So I tried flashing. after flashing OH WONDER it said recovery booting and then it showed this green android logo thing with a rotating icon in it "you know what I mean" but then it stopped and just turned off.. I could freak out really.. I tried flashing again. same issue. I could then press the recovery mode key combo to get into this rotating android logo screen but everytime it just freezes and turns off. yes the battery is fully charged before I started flashing this firmware now. I flashed the one u said the earliest. So Now I tried the one the other guy here showed me. didn't work either. it just gets stuck at samsung logo. I found a repair firmware for my model containing (pit, bl, ap, cp, csc and odin) I flashed all but odin fails "write error". I then tried odin v3.0.7 but then it got stuck while flashing the system image. I waited like 1 hour. nothing. tried it again. nothing it freezes on the same position. I then tried the same on the latest versions of odin v3.12.3, 3.12.7 and on 3.13.1 but it also freezes on system.img.ext4 image flashing..
Click to expand...
Click to collapse
afaik the "repair" fimeware is no better than flashing a stock ROM in one file...
its startng to sound like a hardware error, if it cant even write to the dvice theres really not many (probably any) options left.
ive purposely bricked a phone and recovered it (not recommended of course), ive never had or never saw as much effort youve put in to try and recover a phone...

stylemessiah said:
afaik the "repair" fimeware is no better than flashing a stock ROM in one file...
its startng to sound like a hardware error, if it cant even write to the dvice theres really not many (probably any) options left.
ive purposely bricked a phone and recovered it (not recommended of course), ive never had or never saw as much effort youve put in to try and recover a phone...
Click to expand...
Click to collapse
me neither.. can't believe this.. how can a phone be physically damaged by flashing? paid 70 bugs for a note 4 with a software issue.. as I often do. recovered dead phones from sony, xiaomi, wiko, asus, lg, huawei etc... adb, fastboot and u good to go. odin is killin me.. gonna sell it as bricked.

Cleared caches?

R0B3RTF1SH3R said:
Cleared caches?
Click to expand...
Click to collapse
HOW? If I can't boot into recovery mode?

(Problem) SW REV. CHECK FAIL. DEVICE: 2. Binary: 1.

Hello guys!
I have a big problem with my S7 edge (G935F)... The problem begins when I forget to turn off the OEM security and then I did an update to my Magisk root... When I tried to reboot my phone it doesn't pass of the first logo image, meaning that I broke the "security", so I read about that and then I flashed a firmware, an official UK (BTU I guess) firmware and then I flashed TWRP via Odin to restore a nandroid that I did when I bought my phone... It restored the EFS partition/folder and when my phone reboots I had no network signal, no IMEI... I just tried everything (I hope not) and I can't give back my IMEI and my network signal... When I try to patch the certificate to recover my IMEI via Odin in the download mode it says: SW REV. CHECK FAIL. DEVICE:2. Binary:1
I don't know if I explained it because my english is too bad, but I tried, I know that someone else have the same problem than I because I saw it. Do you find the solution? I'm out of my country and I need it so much :crying:
Regards!

Flash latest stock with csc, but skip bl section

amakuramio said:
Flash latest stock with csc, but skip bl section
Click to expand...
Click to collapse
Thank you for answer me.
I did it with three diferent stock firmwares and the problem persists (no network signal) I think that is something with the EFS folder, I restored a backup of it but is the same, I have not signal yet, but thank you!

Try clean formatting
Arachnorbit said:
Thank you for answer me.
I did it with three diferent stock firmwares and the problem persists (no network signal) I think that is something with the EFS folder, I restored a backup of it but is the same, I have not signal yet, but thank you!
Click to expand...
Click to collapse
Hey brother it happened with me too, unfortunately, I had to format my internal storage to fix this, you need to flash the latest nougat firmware via odin with csc including bl and modem and then start in recovery then format and start phone, remember you would need to put the google account which was previously there in the phone to unlock and complete setup process (very important here)

invinsible_asp said:
Hey brother it happened with me too, unfortunately, I had to format my internal storage to fix this, you need to flash the latest nougat firmware via odin with csc including bl and modem and then start in recovery then format and start phone, remember you would need to put the google account which was previously there in the phone to unlock and complete setup process (very important here)
Click to expand...
Click to collapse
Thank you! Do you know which Firmware I need to flash? Because I flashed a lot of firmwares and it didn't work! You would help me a lot if you give me the name of the one you used.
Here I have some screenshots of what appears in IMEI and SIM.

Try this thread :
https://forum.xda-developers.com/showthread.php?t=3379516
Sent from my SM-G935F using Tapatalk

Arachnorbit said:
Thank you! Do you know which Firmware I need to flash? Because I flashed a lot of firmwares and it didn't work! You would help me a lot if you give me the name of the one you used.
Here I have some screenshots of what appears in IMEI and SIM.
Click to expand...
Click to collapse
Download the latest firmware from https://updato.com (it's fast and reliable) then start in download mode, run odin with administrative privileges, select BL AP Modem and CSC (dont use home since we wish to clean fornat), and in odin uncheck auto reboot option, after the ODIN shows 'pass', disconnect the cord from pc, now you have to be very quick here since our battery is not removable, in order to shut down s7 edge from odin mode, all you have to do is press, volume down, volume up, home and power and as soon as it goes off connect the cord, the battery will show up and now it will be in charging state, after that disconnect the cord, (the phone is now clean fornatted and in off stage) and now boot into recovery to wipe data and cache using default recovery, then reboot phone and then log into your existing google account.
I know its tricky and maybe there's an ez way around it but this worked for me so I'm sharing

SOLUTION, thank you all for your answers!
AndyBury said:
Try this thread :
https://forum.xda-developers.com/showthread.php?t=3379516
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
I tried it at first instance but I could not because my Bootloader was updated to the "U2" version, what I did after that was search the Combination file updated to the U2 bootloader, after a long search I found it.
In resume, The solution is what the OP of that thread says but if you have the same problem like me with the Updated bootloader you need this file instead of the files that are shown there:
https://androidfilehost.com/?fid=890129502657582963
Thank you all! I hope this can help y'all that has this problem! :fingers-crossed:

i am same problem ,how to fix it?

help me

jed0123 said:
help meView attachment 4491615
Click to expand...
Click to collapse
You already fixed the problem I guess, you only need to flash the same firmware that your phone had before flashing the Combination file.

can not

Help
How to know what was my old firmware version? when I try to flash i get SW REV. CHECK FAIL. DEVICE: 2. Binary: 1
And I can't start phone because I'm getting FRP lock. Please help me?
Edit: I downloaded latest firmware and flashed it.

Same problem with s8+
amakuramio said:
Flash latest stock with csc, but skip bl section
Click to expand...
Click to collapse
I have the same problem with my S8+ SM-G955F
I flashed the latest firmware without BL....now my phone is working fine...but I dont have SIGNAL.. any help will be appreciated..

Moved
Thread moved to Questions and Answers.

hello.
im having the exactly same issue....
Im from Brazil, i was trying to install the stock rom then ill upgrade to android 8.0....(my android does not update becouse it from VIVO PROVIDER, my english sucks...hope you understand)
i open odin, select all files, of a stock rom ZTO G935F, then it just give me this error...
how can i fix it? i just want to install android 8.0 nougat =(
thx alot for trying help me!!!

i fixed my phone by skipping the booloader section...
you're a life saver brother...
Thank you
Regards

Arachnorbit said:
Hello guys!
I have a big problem with my S7 edge (G935F)... The problem begins when I forget to turn off the OEM security and then I did an update to my Magisk root... When I tried to reboot my phone it doesn't pass of the first logo image, meaning that I broke the "security", so I read about that and then I flashed a firmware, an official UK (BTU I guess) firmware and then I flashed TWRP via Odin to restore a nandroid that I did when I bought my phone... It restored the EFS partition/folder and when my phone reboots I had no network signal, no IMEI... I just tried everything (I hope not) and I can't give back my IMEI and my network signal... When I try to patch the certificate to recover my IMEI via Odin in the download mode it says: SW REV. CHECK FAIL. DEVICE:2. Binary:1
I don't know if I explained it because my English is too bad, but I tried, I know that someone else has the same problem than I because I saw it. Do you find the solution? I'm out of my country and I need it so much :crying:
Regards!
Click to expand...
Click to collapse
try custom ROMs and I'm sure they have update bootloader and modem use that and its work in my phone

jed0123 said:
can notView attachment 4491806
Click to expand...
Click to collapse
Hello, how did you solve it?

Help I keep getting SW REV. CHECK FAIL. DEVICE:3. BINARY:2 when trying to downgrade BL CP for G935W8

Samsung Galaxy 8 rooting problem

Hi Forum users
have a problem in attempting to ROOT my phone
SAMSUNG GALAXY S8
been a novice user made a mistake
hopping I can still win.
will give very brief Description for the moment hoping to get some help
Basically phone booted into Standard ROM b4 I had finished (last step applying ROOT)
I now get an Error that boots and reboots) the error is
"Only official released binaries are allowed to be flashed"
can still get into Download screen, but cannot get to recovery (TWRP)
Oden can still connect to download screen.
I think what I need to do is a Factory reset again, and hopefully get back into RECOVERY
any suggestions or help would be gratefully received
thanks
PS
happy to give full description if needed

RANXzerox said:
Hi Forum users
have a problem in attempting to ROOT my phone
SAMSUNG GALAXY S8
been a novice user made a mistake
hopping I can still win.
will give very brief Description for the moment hoping to get some help
Basically phone booted into Standard ROM b4 I had finished (last step applying ROOT)
I now get an Error that boots and reboots) the error is
"Only official released binaries are allowed to be flashed"
can still get into Download screen, but cannot get to recovery (TWRP)
Oden can still connect to download screen.
I think what I need to do is a Factory reset again, and hopefully get back into RECOVERY
any suggestions or help would be gratefully received
thanks
PS
happy to give full description if needed
Click to expand...
Click to collapse
You will need to flash firmware via odin.
You can download firmware with updato.com or sammobile.com

Thanks for reply
Thanks for the reply
Ok just to be clear
I have already flashed TWRP
SO I have a bootloader installed
but cannot access RECOVERY MODE
SO I can access Oden in download mode
which Firmware are you suggesting I Flash
Just had a browse of those sites seem to be mainly Northern hemisphere
I am in Australia
But from what I understand we have the same CPU as the European ones

RANXzerox said:
Thanks for the reply
Ok just to be clear
I have already flashed TWRP
SO I have a bootloader installed
but cannot access RECOVERY MODE
SO I can access Oden in download mode
which Firmware are you suggesting I Flash
Just had a browse of those sites seem to be mainly Northern hemisphere
I am in Australia
But from what I understand we have the same CPU as the European ones
Click to expand...
Click to collapse
1. Flashing firmware will delete twrp.
2. Being from Australia myself all firmware are on the website. You will have to filter out for Australian firmware.
3. Do you know what firmware you are on.

Ranx
Hmm didn't take note of that B4 starting
but I think my Model numbers is SM-G950F if that helps
SM-G950F Exynos 8895 9 - just done a quick Google
one other thing that might be relevant i also managed top install
no-verity-opt-encrypt-5.1.zip
before stuffing up
will this affect things or will that be overwritten

RANXzerox said:
Hmm didn't take note of that B4 starting
but I think my Model numbers is SM-G950F if that helps
SM-G950F Exynos 8895 9 - just done a quick Google
one other thing that might be relevant i also managed top install
no-verity-opt-encrypt-5.1.zip
before stuffing up
will this affect things or will that be overwritten
Click to expand...
Click to collapse
Flashing stock rom will restore you phone to it's original state. So you will have to install twrp and root again.
For information about firmware and Odin maybe this may be of some help.
https://forum.xda-developers.com/galaxy-s8/help/method-downgrade-pie-to-oreo-t3916432/post79233602
If you are not sure about your firmware install the latest version.
On the website they will also have dates of when the firmwares are released.
You can use also samfirm or frija ( PC applications ) to download latest firmware.

OK will follow that info
and do the Firmware update
As I don't know the firmware number, will have to try the latest version
will do a bit more reading when I have a some time and give it a go
thanks for the links.
Will let you know how it turns out
THANKS

Few more Questions
OK done some reading
filtered out some relevent Files, (I hope)
one file took 16 hours to download (they where feeding it at 50kbs).
So have two files which where listed as XSA carrier,
others where Telstra and Optus.
As I am not aware of XSA carrier was hopping that it was some sort of generic carrier firmware
Is that correct ??
One is version 8
the other is version 9
So should I go with the version 9 ?
Sorry for all the questions, just want to make sure I get it right
THANKS

RANXzerox said:
OK done some reading
filtered out some relevent Files, (I hope)
one file took 16 hours to download (they where feeding it at 50kbs).
So have two files which where listed as XSA carrier,
others where Telstra and Optus.
As I am not aware of XSA carrier was hopping that it was some sort of generic carrier firmware
Is that correct ??
One is version 8
the other is version 9
So should I go with the version 9 ?
Sorry for all the questions, just want to make sure I get it right
THANKS
Click to expand...
Click to collapse
XSA is unbranded firmware ( it's what I have installed on my phone).
If you are locked into a carrier flashing other firmware will not unlock you from that carrier.
Not knowing what firmware you had before and because of download speeds you may have to use version 9 ( PIE ) firmware.
To check software version no. ( bootloader ) you can check in download mode. It should have a line saying AP SWREV: B : * - the star is your bootloader version. So you will have to use this version or higher when flashing firmware.
Make sure of your model number when searching for firmware. S8 = SM-G950f

Im having a similar problem, had to install stock july patch im using latest odin version then, i install recovery but when the phone reboots there is no recovery, tried to downgrade to february patch but odin dont allow it

hasablack said:
Im having a similar problem, had to install stock july patch im using latest odin version then, i install recovery but when the phone reboots there is no recovery, tried to downgrade to february patch but odin dont allow it
Click to expand...
Click to collapse
Are you talking about stock or custom recovery and what is the issues you are having with it.
Depending on you bootloader version number you can not down grade firmware.

I tried to install stock recovery, the problem is: odin installs sucessfully recovery but when i try to go to recovery is not installed

spawnlives said:
XSA is unbranded firmware ( it's what I have installed on my phone).
If you are locked into a carrier flashing other firmware will not unlock you from that carrier.
Not knowing what firmware you had before and because of download speeds you may have to use version 9 ( PIE ) firmware.
To check software version no. ( bootloader ) you can check in download mode. It should have a line saying AP SWREV: B : * - the star is your bootloader version. So you will have to use this version or higher when flashing firmware.
Make sure of your model number when searching for firmware. S8 = SM-G950f
Click to expand...
Click to collapse
Thanks will do a check on firmware
PS
I am on NBN ,
fake NBN that is,
wireless,
but download speed was set at the other end

spawnlives said:
XSA is unbranded firmware ( it's what I have installed on my phone).
If you are locked into a carrier flashing other firmware will not unlock you from that carrier.
Not knowing what firmware you had before and because of download speeds you may have to use version 9 ( PIE ) firmware.
To check software version no. ( bootloader ) you can check in download mode. It should have a line saying AP SWREV: B : * - the star is your bootloader version. So you will have to use this version or higher when flashing firmware.
Make sure of your model number when searching for firmware. S8 = SM-G950f
Click to expand...
Click to collapse
Hi Spawnlives
ok have installed Firmware version 9 all ok
THANKS
have my phone working again
My phone was Ver 5
"on a different matter having real trouble signing into this forum
pretty much had to reset my pass word every time"

RANXzerox said:
Hi Spawnlives
ok have installed Firmware version 9 all ok
THANKS
have my phone working again
My phone was Ver 5
"on a different matter having real trouble signing into this forum
pretty much had to reset my pass word every time"
Click to expand...
Click to collapse
Glad you got it sort out.
Not sure about the signing in. I use mobile app which is logged it to my Google account. I do have some issues with the PC ( without logging into Google ) but don't use it much. All I can suggest is to try a search on XDA or ask the moderators for assistance

Retry installing Recovery
hasablack said:
Im having a similar problem, had to install stock july patch im using latest odin version then, i install recovery but when the phone reboots there is no recovery, tried to downgrade to february patch but odin dont allow it
Click to expand...
Click to collapse
Try to install TWRP again via Odin.

S7 Edge FRP Erase on G935F G935FXXU3ERL3 Android 8.0.0 Oreo

Hello,
I'm a Newbie
How can i erase the FRP on my s7 edge ? nothing works on my s7 edge.
Is there possibility with odein or else ?
my simcard is broken so only with odin or other software
Can someone help me, thx a lot :good::good::good:

CrankyBoy^^ said:
Hello,
I'm a Newbie
How can i erase the FRP on my s7 edge ? nothing works on my s7 edge.
Is there possibility with odein or else ?
my simcard is broken so only with odin or other software
Can someone help me, thx a lot :good::good::good:
Click to expand...
Click to collapse
hello "A Newbie", how goes it? LOLOL
welcome to the fray, we are all only here to learn, help, and/or both at the same time, so youre in a good place.
Anyways, did you do a factory reset and are now stuck with the FRP screen?

exactly, i do a factory reset and now I'm here
I'm searching for Help

CrankyBoy^^ said:
exactly, i do a factory reset and now I'm here
I'm searching for Help
Click to expand...
Click to collapse
ok, get the firmware for your phone from sammobile.com but use samfirm or frija to download it, flash the firmware in Odin 9 time. yes, 9 times. try booting between flashes and itll go away by the 9th time. Not even kidding

9 time flashing. No chance. FRP lock is almost there.
Installed is G935FXXS6ESI4
What can i do ? Any Idea = Combination Firmware ?

Youdoofus said:
ok, get the firmware for your phone from sammobile.com but use samfirm or frija to download it, flash the firmware in Odin 9 time. yes, 9 times. try booting between flashes and itll go away by the 9th time. Not even kidding
Click to expand...
Click to collapse
is this really working ?
bcs my sim tray is broken and have flickering screen on my phone and want other way to bypass FRP
p.p "try booting between flashes and itll go away by the 9th time" on each flash to boot and re-flash it ?

loonbg said:
is this really working ?
bcs my sim tray is broken and have flickering screen on my phone and want other way to bypass FRP
p.p "try booting between flashes and itll go away by the 9th time" on each flash to boot and re-flash it ?
Click to expand...
Click to collapse
not anymore. there was a patch that fixed the bug that allowed this to occur. Sammy is always right on our tails. now you need the combination firmware, which you flash in Odin as well then follow it up with the stock firmware from sammobile since the combination FW isnt really bootable (it is, but its weird lol)

Youdoofus said:
not anymore. there was a patch that fixed the bug that allowed this to occur. Sammy is always right on our tails. now you need the combination firmware, which you flash in Odin as well then follow it up with the stock firmware from sammobile since the combination FW isnt really bootable (it is, but its weird lol)
Click to expand...
Click to collapse
I flashed the combination firmware. After that I flashed my stock firmware but now I get stuck on recovery screen. First it says "Erasing" and then the dead Android mascot shows up. Can't boot into system. Any suggestions? FRP Lock is still on and I can't flash TWRP, custom binary is locked by frp.

possible solution
Hi, how are you? I'm sorry for my english, I'm from Brazil and I'm using the ksks translator so with my j5 i used the frp hijacker (just put it on google) there you choose the phone model, put it in download mode, install the program on the computer, choose the model, check remove frp and a hijack it! and ready frp unlocked

M.Ned said:
I flashed the combination firmware. After that I flashed my stock firmware but now I get stuck on recovery screen. First it says "Erasing" and then the dead Android mascot shows up. Can't boot into system. Any suggestions? FRP Lock is still on and I can't flash TWRP, custom binary is locked by frp.
Click to expand...
Click to collapse
Does Odin say it flashed the firmware successfully

Youdoofus said:
Does Odin say it flashed the firmware successfully
Click to expand...
Click to collapse
Yes it does. I tried 3 different firmwares from different regions on SamMobile. Still no luck...

M.Ned said:
Yes it does. I tried 3 different firmwares from different regions on SamMobile. Still no luck...
Click to expand...
Click to collapse
tried it on another computer? Ive had that issue with my desktop/laptop(s). I never dug into what caused it to fail on the desktop vs working on a few laptops. Literally everything else works exactly as it should on the desktop so i just let it be an unresolved oddity. Likely not worth the time it would take to resolve. Anywho, try a different computer and/or diff cable. I just ordered an Anker cable from amazon and its thicker and more sturdy than the micro usb cable ive been hanging on to from my old blackberry tour. Cables are stupid cheap online these days, even for the very very good ones. Perhaps worth a shot, but i cant suggest that you spend money on anything. I can say that its what I would do.