Anyone with experience in copying the IMEI from SIM1 to SIM2 to enable dual SIM S8 in 950F using, for example, tools like imei gurus?
you wont get help with imei cloning here. it is against the rules.
Ups...sorry if I violated the rules. Was not aware of that
Have anyone tried this method ?
I tried it recently. Did everything correctly, but after rebooting the device ; no effect.!!
:crying:
So i rechecked again via QXDM for LTE BC CONFIG & LTE BC CONFIG DIV for the values,it was the same which i gave
So, Anyone tried ?
Got it working ?
or
Same Result as mine ?
Hello. I am trying hard to add LTE band 4 to this device. I have QPST "talking" to the phone and QXDM "talking" to QPST's service programming. But when I try to read almost any item, I get an error - Item Not Active (or something like that). I am using the latest QPST I can find 2.7.474 and the latest QXDM I can find 3.14.594. This all worked fine against my test phone - a Note 3 - but I am getting nowhere fast with the Zenfone. Perhaps it is because the Zenfone is 64 bit and the tools I have are not new enough? I welcome any suggestions. Thanks
Nokia, OnePlus and Asus Zenfone Max Pro M1 does not have a programmable radio firmware like Motorola via QPST, QXDM. Network parameters are pre-installed in mcfg_sw.mbn files, also the per carrier volte parameters are embedded in this folder. mcfg_sw.mbn files can be deleted and installed by QFIL in QPST. Nokia 1 , an entry level phone has LTE band 41 which Asus does not. These files no not contain any serial numbers or IMEI mappings so can be flashed. A few guides are there for Pixel phones where they have used OnePlus mcfg_sw.mbn to enable German carrier VOLTE. The available bands in Asus Zenfone Max Pro can be locked unlocked by Network Signal Guru APK after root.
dr.faramroze said:
Nokia, OnePlus and Asus Zenfone Max Pro M1 does not have a programmable radio firmware like Motorola via QPST, QXDM. Network parameters are pre-installed in mcfg_sw.mbn files, also the per carrier volte parameters are embedded in this folder. mcfg_sw.mbn files can be deleted and installed by QFIL in QPST. Nokia 1 , an entry level phone has LTE band 41 which Asus does not. These files no not contain any serial numbers or IMEI mappings so can be flashed. A few guides are there for Pixel phones where they have used OnePlus mcfg_sw.mbn to enable German carrier VOLTE. The available bands in Asus Zenfone Max Pro can be locked unlocked by Network Signal Guru APK after root.
Click to expand...
Click to collapse
Thanks for this tip/info. A friend of mine, not understanding, purchased an Asus Zenfone Max Pro M1 for himself that was made for use in India (I think). But he is in the USA on T-Mobile and needs different frequency bands that those that are supported. Because he has to use a TMobile CellSpot device at his home (due to no signal from any towers) he needs:
Band 4 LTE (2100 MHz)
Band 2 UMTS/WCDMA/HSPA (1900 MHz)
And neither of these are supported on the model he purchased. I was hoping to succeed in adding LTE 4 to his device using the Qualcomm tools. But I was not successful in doing so. Following some online guides I was able to change the supported LTE bands on an old Note 3 (not able to actually test them though) so that Network Signal Guru showed them in its list of frequencies. But I could not even read the data for this on the Zenfone. From what you say this now makes some sense to me.
Is it somehow possible to add these bands (at least the LTE 4) to the Zenfone? I know the Network Signal Guru can block bands. But I did not think it could add or remove them. If you can point me to something regarding this process, if possible, that would be great. Thanks
dr.faramroze said:
Nokia, OnePlus and Asus Zenfone Max Pro M1 does not have a programmable radio firmware like Motorola via QPST, QXDM. Network parameters are pre-installed in mcfg_sw.mbn files, also the per carrier volte parameters are embedded in this folder. mcfg_sw.mbn files can be deleted and installed by QFIL in QPST. Nokia 1 , an entry level phone has LTE band 41 which Asus does not. These files no not contain any serial numbers or IMEI mappings so can be flashed. A few guides are there for Pixel phones where they have used OnePlus mcfg_sw.mbn to enable German carrier VOLTE. The available bands in Asus Zenfone Max Pro can be locked unlocked by Network Signal Guru APK after root.
Click to expand...
Click to collapse
Just went looking again for Network Signal Guru on Play Store. It no longer exists! Even the link at QTRUN no longer works. Rats! Anyone have a good source for this or know what happened here?
You mean this? My backup from what was available on the playstore last month.....can be trusted.
MD5 Checksum ccfb4ab7ddd9708b2299c57d7e74b654
SHA-1 Checksum f6e99855875c35ad64d7b51c21a95b1fee135c5d
Cookie Ninja said:
You mean this? My backup from what was available on the playstore last month.....can be trusted.
MD5 Checksum ccfb4ab7ddd9708b2299c57d7e74b654
SHA-1 Checksum f6e99855875c35ad64d7b51c21a95b1fee135c5d
Click to expand...
Click to collapse
Yes indeed. Thanks very much!
I have a friend's ZB602KL and really need to try and add LTE band 4 since he is in the USA and bought this phone without realizing its supported bands lack what he needs. I have the phone rooted with Magisk. I have tried using QXDM without success <https://forum.xda-developers.com/asus-zenfone-max-pro-m1/help/able-to-modify-qualcomm-settings-using-t3928772>.
I have read here <https://forum.xda-developers.com/showpost.php?p=79713339&postcount=3> that this is because modem config info is simply not available via QXDM but is stored in the file system in a file called mcfg_sw.mbn. I have found this (and other files) stored under /firmware/image/modem_pr/mcfg/configs and patching/replacing these files from other variants of this phone might work.
So I am looking for some help in locating a file that has LTE band 4 enabled. Of course, any other help/tips/approaches are appreciated.
Thanks
I have enabled ViWIFI by dialing *#*#869434#*#* and I have activated Make calls using Wi-Fi and turned "Network preferences" to Prefer Wi-FI.
I work in construction down below where I don't have any signal but I do have stable wifi. People can't reach me nor can I reach them. I can only get in contact in certain spots, and I assume that's because I'm getting a phone signal, and not the Wifi kicking in. Is this down to the phone carrier, or doesn't it work with this phone? Is it possible that work disabled this feature on their network?
For me the same and I am interested too if someone has a solution to get that work.
Yes, for me both works fine. Have volte and vowifi with my RN7 working. For vowifi I need to modify the modem by editing with Qualcomm pdc / qfil tool.
Provider O2, Germany
Hans_Werner said:
Yes, for me both works fine. Have volte and vowifi with my RN7 working. For vowifi I need to modify the modem by editing with Qualcomm pdc / qfil tool.
Provider O2, Germany
Click to expand...
Click to collapse
Works for me aswell, modified my locked and non-rooted Note 7 with PDC, activated commercial-MTS,
KruSan said:
Works for me aswell, modified my locked and non-rooted Note 7 with PDC, activated commercial-MTS,
Click to expand...
Click to collapse
So it didn't work for you when just enabling wifi calling? Is this up to the carrier or can I make the Vowifi work? I have no idea what PDC is
KruSan said:
Works for me aswell, modified my locked and non-rooted Note 7 with PDC, activated commercial-MTS,
Click to expand...
Click to collapse
Hans_Werner said:
Yes, for me both works fine. Have volte and vowifi with my RN7 working. For vowifi I need to modify the modem by editing with Qualcomm pdc / qfil tool.
Provider O2, Germany
Click to expand...
Click to collapse
So there's an extra step I need to take. Could it be possible that my carrier doesn't support vowifi on my phone, or do you think it will work if I modify the PDC? I have actually no idea what PDC is
KruSan said:
Works for me aswell, modified my locked and non-rooted Note 7 with PDC, activated commercial-MTS,
Click to expand...
Click to collapse
I've got QPST, PDC etc. all working and my device is showing up.
My phone comes up with Row_Commercial showing Sub 1 as active and everything else inactive.
First I changed Row_Commercial's sub 0 and sub 1 to active... Rebooted the phone and tested my VoWiFi... Still not working on T-Mobile.
I then reset my Row_Commercial setting back to how they were.
Second:
I set commercial_MTS Sub 0 & Sub 1 to active like you mentioned.
Did the same steps as above rebooted the phone and still am unable to use VoWiFi.
Even went through with the *#*#VOWIFI*#*# toggle... Rebooted the phone and still am unable to use VoWiFi.
Which carrier are you using?
Wonder if mine is blocking my VoWiFi access
So I've checked out this thread and downloaded the TMO-Commercial MBN file. Loaded it into PDC as instructed and with Sub 0 activated, I'm able to now see the VoLTE icon on top of my screen. My phone shows VoWiFi and VoLTE are switched on in the *#*#4636#*#* menu as before (see screenshot).
(Funny thing is I found with both Sub0 & Sub1 activated VoWiFi is greyed out on the 4636 menu).
I can now select VoWiFi which I couldn't do before however when I chose it nothing happens. ( see video)
Getting closer... Hopefully we can get this working on T-Mobile... Fingers crossed
Hans_Werner said:
Yes, for me both works fine. Have volte and vowifi with my RN7 working. For vowifi I need to modify the modem by editing with Qualcomm pdc / qfil tool.
Provider O2, Germany
Click to expand...
Click to collapse
KruSan said:
Works for me aswell, modified my locked and non-rooted Note 7 with PDC, activated commercial-MTS,
Click to expand...
Click to collapse
Found some information about vowifi activation on other Xiaomi phones, provider Digi Romania, using PDC tool. I'm tried to activate the vowifi service (volte already working, same provider) using PDC tool (changed profile to "DT Greece") but without success.
Can you share some additional information about PDC & vowifi, need specified MIUI/firmware version?
Hans_Werner said:
Yes, for me both works fine. Have volte and vowifi with my RN7 working. For vowifi I need to modify the modem by editing with Qualcomm pdc / qfil tool.
Provider O2, Germany
Click to expand...
Click to collapse
Which profile did you use? ROW_Commercial which was activated only provides VoLTE. Activating e.g. AIRtel_Commercial results in working VoWifi, but broken VoLTE :/ Und unfortunately the profiles mentioned in https://forum.xda-developers.com/showpost.php?p=78133826&postcount=23 don't exist.
Edit: Extracted some configs from non-hlos.bin, it contained a "Telefonica Germany Commercial" mbn file, unfortunately no luck with VoWifi so far.
bjo81 said:
Which profile did you use? ROW_Commercial which was activated only provides VoLTE. Activating e.g. AIRtel_Commercial results in working VoWifi, but broken VoLTE :/ Und unfortunately the profiles mentioned in https://forum.xda-developers.com/showpost.php?p=78133826&postcount=23 don't exist.
Edit: Extracted some configs from non-hlos.bin, it contained a "Telefonica Germany Commercial" mbn file, unfortunately no luck with VoWifi so far.
Click to expand...
Click to collapse
No need to use extra *.bin.
Just use pdc tool and select DT_Poland_commercial.
Have vowifi and volte working with o2 Germany.
But after last update (xiaomi.eu) 11.0.2 Android 10 the volte Symbole doesn't appear. But it is working.
Check when doing a call and the network don't change from 4g to gsm. Also check with ussd code *#*#4636#*#* -> telephone info 1 or 2 -> more -> IMS Service Status "voice over lte available"
Thanks for the hint, here it works now also with DT_Poland_commercial. But really strange it doesn't work with the MBN for Tef_Germany_Commercial.
I'm wondering if my phone is now stuck on T-Mobile regarding roaming networks. I'm in the Netherlands now and the phone is only in T-MobileNL instead of using KPN like my work phone does (using also o2).
Hans_Werner said:
No need to use extra *.bin.
Just use pdc tool and select DT_Poland_commercial.
Have vowifi and volte working with o2 Germany.
But after last update (xiaomi.eu) 11.0.2 Android 10 the volte Symbole doesn't appear. But it is working.
Check when doing a call and the network don't change from 4g to gsm. Also check with ussd code *#*#4636#*#* -> telephone info 1 or 2 -> more -> IMS Service Status "voice over lte available"
Click to expand...
Click to collapse
:good:
Using xiaomi.eu 20.7.9 rom, with pdc tool selected DT_Poland_commercial and now I have vowifi.
Thank you!
Anyone with TMobile USA able to get this working?!
Tried to fire up PDC yesterday but now my phone won't reconnect to the program the way it did before several months ago when I first tried this.
Would love to get Vowifi working on this device with TMO USA
I'm on MIUI 10.3.5
tiguy99 said:
Anyone with TMobile USA able to get this working?!
Tried to fire up PDC yesterday but now my phone won't reconnect to the program the way it did before several months ago when I first tried this.
Would love to get Vowifi working on this device with TMO USA
I'm on MIUI 10.3.5
Click to expand...
Click to collapse
Same here. The messege "QMI connection not ready, please use USB driver version 1.00.32 or later and fix the connection before using PDC tool" appear and not work. Tested multiple Qualcomm drivers, multiple miui distributions, nothing.
Tried to enable VoLTE & VoWIFI on my Redme 9 Pro, using the PDC and can actually get the VoWIFI works. However, once the device reboot, it just fall back to the ROW_Commercial profile and have to redo again to get it work.
Do not know if this happened on other Redmi series?
Can anyone help with this issue?
On my poco f3 i have figured out with PDC but after reboot the values reset...any fix for this?
Could anyone tell where the config's are stored. I was on Android 11 - now switch back to Miui to do the changes via PDC. I did a backup of the EFS patition via OrangeFox. Then flash an Android 12.1 Rom. Restore EFS None of the custom Roms works with VoWifi
Any suggestions?