Ok for those that took the XAA update ending in K2 and tried everything to load another firmware and failed here is help. The T-Mobile firmware is currently on BQK5 which is Bootloader v2 so you can download and apply it to your device using the latest official version of ODIN. WAIT!!! Don't get your panties in a bunch, READ!! Keep your sim card in your device so that you can get your carrier firmware and logos. This works on both AT&T and T-Mobile devices. The Devices are the same so don't let the TMB fool you. It works. You can use this if you want your carrier software back and play around with the Oreo Betas. I am not trying to step on nobody toes here but I will try to keep yall updated on the betas also.
Here are the links.
TMB & ATT Firmware BQK5 1 File (Use Odin 3.12.7)
https://drive.google.com/file/d/1jKmbvCNjtpSiyGibcdlijRx36-BVPwMw/view?usp=sharing
XAA Firmware if you want to go back to it. ( I used Prince Odin) Nope I didn't upload it
https://drive.google.com/file/d/18jsWg39RzpW8QuCJ_IJLKhVK1Yeneu2R/view?usp=sharing
Oreo Beta BQK5 to ZQKS (I used Recovery to load it.)
https://drive.google.com/file/d/15wPo-cKLrELJjluVw1yFpvPfwpmDPWv4/view?usp=sharing
ODIN 3.2.7
https://drive.google.com/file/d/15wPo-cKLrELJjluVw1yFpvPfwpmDPWv4/view?usp=sharing
Is there a v2 U1 unlocked firmware than can be flashed to Oreo ? Don't want carrier branding but want it to work with Sprint
Since all of the firmware versions now include all the settings for each carrier, can I just download any CRC5 firmware from updato for SM-G950U and flash it using the newer odin? Or is carrier switching still required? Basically I am planning to take my at&t S8 that is on the unlocked Oreo beta and go to the official CRC5 release, but on at&t (which currently doesn't have a full set of firmware to flash available).
DL any of them. You dl one, you have them all. They will all flash the same and install carrier files/bloat depending on the installed sim card
Hi guys I installed the pie beta 4 to my galaxy S8 (I was not registered on the beta program) through manually installing via the SD card, now I know that the official release for the anadroid pie is out, so I would like to leave the beta and just have the full version. However, everytime I check for updates, it says im already up to date, what can I do to get out of the beta and just go to the full, or is it the same?
Model = 950F
Build Number = ....U4ZSAI
Thanks!.
devtekve said:
Hi guys I installed the pie beta 4 to my galaxy S8 (I was not registered on the beta program) through manually installing via the SD card, now I know that the official release for the anadroid pie is out, so I would like to leave the beta and just have the full version. However, everytime I check for updates, it says im already up to date, what can I do to get out of the beta and just go to the full, or is it the same?
Model = 950F
Build Number = ....U4ZSAI
Thanks!.
Click to expand...
Click to collapse
Search here for your version.
Then flash with Odin. Link to Odin is also on the page.
https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/
Take SamFirm for Download.
Which path should I take from the At&t latest firmware update G975USQS2ASI6 to get to the Oneui 2.0 beta
DLegado24 said:
Which path should I take from the At&t latest firmware update G975USQS2ASI6 to get to the Oneui 2.0 beta
Click to expand...
Click to collapse
You can't get to One UI 2 beta on the AT&T firmware because that's Android 10 beta and AT&T didn't opt into the Samsung beta program. You'll have to wait until the final OTA update release OR flash the unlocked U1 firmware or the T-mobile firmware. I think you can it that way.
DLegado24 said:
Which path should I take from the At&t latest firmware update G975USQS2ASI6 to get to the Oneui 2.0 beta
Click to expand...
Click to collapse
The zip has been posted here. I had SI4 and manually flashed the zip through stock recovery.
Where can I download the G975USQS2ASI6 OTA file for AT&T S10 plus?
Dadrick 21 said:
Where can I download the G975USQS2ASI6 OTA file for AT&T S10 plus?
Click to expand...
Click to collapse
Latest AT&T update is G975USQU2BSIP Dated Oct. 10 But to Flash Beta you Must be on BSI4
tailgunner9 said:
Latest AT&T update is G975USQU2BSIP Dated Oct. 10 But to Flash Beta you Must be on BSI4
Click to expand...
Click to collapse
Thanks but I only need a link to download the following G975USQS2ASI6
Dadrick 21 said:
Thanks but I only need a link to download the following G975USQS2ASI6
Click to expand...
Click to collapse
Your best bet is www.Sammoble.com. It is a slow download unless you have paid account, but it works.
I have the ATT version, but I cannot receive updates via FOTA, because I live abroad and I am not connected to the ATT network, some way or way to receive updates without having to use ODIN.
The last question.
I can Flash U1 having the N975U ATT Version, is there any risk to do this?
rodix_t said:
I have the ATT version, but I cannot receive updates via FOTA, because I live abroad and I am not connected to the ATT network, some way or way to receive updates without having to use ODIN.
The last question.
I can Flash U1 having the N975U ATT Version, is there any risk to do this?
Click to expand...
Click to collapse
I have the same issue bruh
---------- Post added at 04:49 AM ---------- Previous post was at 04:49 AM ----------
magicmckinney said:
Your best bet is www.Sammoble.com. It is a slow download unless you have paid account, but it works.
Click to expand...
Click to collapse
Thanks will try this
---------- Post added at 04:51 AM ---------- Previous post was at 04:49 AM ----------
Have to be downloading OTA files and updating manually
I need the BSI4 version of the U1 ATT. The sammobile download is super slow and will take 3 days to download lol. Does anyone have an alternate link? I'd appreciate it. Im trying to install the one ui 2.0 beta. Thanks
I need the BSI6 AT&T firmware ODIN file, but it doesn't seem to exist. Not even on Samsung's firmware site.
The beta can be flashed on the U1 ATT BSI4 version correct?
magicmckinney said:
Your best bet is www.Sammoble.com. It is a slow download unless you have paid account, but it works.
Click to expand...
Click to collapse
What CSC code did you use on Sammobile for the AT&T version?
Lavman72 said:
What CSC code did you use on Sammobile for the AT&T version?
Click to expand...
Click to collapse
Just the one that comes with the rom you download. It will set up right by your sim card.
The latest rom I have is BSIV before I started receiving Beta FOTA's which are now up to ZSK9. I used the noname rom and it setup for me as VZW/VZW/VZW. Even if it sets up as XXX/XXX/ATT it will work great.
Beta 4 G975USQU2ZSK9 came out today. Its on firmware.science Login in first.
My AT&T branded S10 plus here just updated to BSIW with November 2019 security patch. You can download AT&T firmware from this pay site here: http://www.gsm2file.com/
StoneyJSG said:
My AT&T branded S10 plus here just updated to BSIW with November 2019 security patch. You can download AT&T firmware from this pay site here: http://www.gsm2file.com/
Click to expand...
Click to collapse
I'm not sure which ones to get. Can you link me to the correct files? I need the U att, not U1.
http://www.gsm2file.com/index.php?f...975U Galaxy S10 Plus Firmware/Android 9.0 Pie
You would have had to be on Pie G975USQS2BSI4 to install the first, Beta 1 and then on up the line to now Beta 4 You cannot install Beta on your current version of BSIW because there is no download file for doing it. that I know of.
DWD12 said:
I'm not sure which ones to get. Can you link me to the correct files? I need the U att, not U1.
http://www.gsm2file.com/index.php?f...975U Galaxy S10 Plus Firmware/Android 9.0 Pie
Click to expand...
Click to collapse
You just do a search at the top, but here's the ASI6 AT&T firmware:
http://www.gsm2file.com/index.php?f... Pie/G975USQS2ASI6 Android 9.0 5File Firmware
Hi!
Does anyone know where I can find the T387AAUCS3CUD1 stock ROM? I'm trying to fix a unit that I may have messed up by tinkering with custom ROMs.
Anyone?
Still nothing?
Hi also searching high and low for T387AAUCS3CUD1.
Any success finding it?
Samsung Galaxy Tab A (T387AA) - Software Update for the Samsung Galaxy Tab A (T387AA) - AT&T
Get Samsung Galaxy Tab A (T387AA) support for the topic: Software Update for the Samsung Galaxy Tab A (T387AA). Find more step-by-step device tutorials on att.com.
www.att.com
ATT is worthless - no support. OTA Android 8 won't update to Android 10. Says already current.
No luck yet :-(
Still no luck.
Someone recently gave me a SM-T387AA, came across this thread while looking for the latest firmware for the device. It does appear that T387AAUCS3CUD1 is the latest for the AA version, which I also was unable to locate. (probably because ATT uses their own servers for firmware instead of samsung) However, while searching, I also came across a newer version of firmware for SM-T387W.
Specifically:
AP VERSION T387WVLS3CVK2
CSC VERSION T387WOYV3CVK2
CSC VTR (Canada)
ANDROID VERSION Q(Android 10)
SIZE 2.62 GB Full Files
MD5 d3b07faf990e6b33b55f5f39839799e4
BUILD DATE 20221114152111
SECURITY PATCH LEVEL 2022-06-01
To my surprise, I flashed the 387W firmware on my 387AA with ODIN and everything seems to be working just fine. Still can't unlock my bootloader though. I see there's also a 387R4 variant. I might try that next, and will report back if I do.
Would this not though prevent a user from being able to use it on AT&T?
scythe000 said:
Would this not though prevent a user from being able to use it on AT&T?
Click to expand...
Click to collapse
I popped in an ATT sim and calls/txt appear to be working.
Oh interesting, I wonder what the difference between the two firmware versions are then?
javadahut said:
Someone recently gave me a SM-T387AA, came across this thread while looking for the latest firmware for the device. It does appear that T387AAUCS3CUD1 is the latest for the AA version, which I also was unable to locate. (probably because ATT uses their own servers for firmware instead of samsung) However, while searching, I also came across a newer version of firmware for SM-T387W.
Specifically:
AP VERSION T387WVLS3CVK2
CSC VERSION T387WOYV3CVK2
CSC VTR (Canada)
ANDROID VERSION Q(Android 10)
SIZE 2.62 GB Full Files
MD5 d3b07faf990e6b33b55f5f39839799e4
BUILD DATE 20221114152111
SECURITY PATCH LEVEL 2022-06-01
To my surprise, I flashed the 387W firmware on my 387AA with ODIN and everything seems to be working just fine. Still can't unlock my bootloader though. I see there's also a 387R4 variant. I might try that next, and will report back if I do.
Click to expand...
Click to collapse
Got a link to where we can download it?
scythe000 said:
Got a link to where we can download it?
Click to expand...
Click to collapse
I used Bifrost. It can pull the latest firmware for most samsung devices that are hosted on samsung servers. Type in the model, "SM-T387W" and the CSC, "VTR", check for update and then download.
Bifrost link: https://github.com/zacharee/SamloaderKotlin