Hey everyone,
I'm new here, attracted by my purchase of an X1 last week. I was disappointed playing with it at first, but after installing lots of things from here I love it - you guys are wizards, thanks!
Anyway, I've hit a problem and would be grateful for some help. Something I installed in the last few days messed up my screen layout - in some menu items the text was slightly shifted to the right, meaning the last word or two was actually chopped off the screen. I tried uninstalling a few things, but nothing helped, so I thought 'factory reset'. This was successful in resolving the issue, and I installed all my apps and panels again.
However, strangely, Messenger was no longer there. My phone is an O2 handset and it was there originally. So I installed Windows Live, only to notice that it ships from Microsoft with no IM installed. So I had to get it from a link here, and it works perfectly. But now, there seems to be a lack of integration with the app and my phone, e.g it does not show up on my Microsoft Live panel (I only get Live and Sync, with the 3rd 'space' empty). Also, I'm sure there used to be an 'instant message' option on the menu of a contact - that's no longer there. It's mainly the shortcut on the Live Panel I'd like back though, any ideas?
Jason
HTC has released a new ROM for Orange customers.
It can be found on the HTC website.
good find, now if only htc would be so kind as to give a changelog
Could anybody who has downloaded this tell us what the major differences are please. Don't want to be bothered to download it if it tries to fix a problem i haven't got - if it aint broke etc.
peterc10 said:
Could anybody who has downloaded this tell us what the major differences are please. Don't want to be bothered to download it if it tries to fix a problem i haven't got - if it aint broke etc.
Click to expand...
Click to collapse
Same here, I want to know what changes it will make, No point doing all that hard work for a minor bug that I don't have.
Thanks.
peterc10 said:
Could anybody who has downloaded this tell us what the major differences are please. Don't want to be bothered to download it if it tries to fix a problem i haven't got - if it aint broke etc.
Click to expand...
Click to collapse
Same here, I want to know what changes it will make, No point doing all that hard work for a minor bug that I don't have.
Thanks.
Well I've downloaded and installed the update - I'm one of those "strange" fellows who assumes that an update should just be applied as it will "update" things.
What have I found:
No real differences to anything at all. I did have a bug whereby the browser would start turning itself off randomly (both WiFi and 3G and with 1 or more tabs open & many different sites so no idea what caused it - happened both straight after a reboot and also when been left on for a few days) This no longer seems to be happening.
My main bugbear with it now is that I've found that I can't see all the programs that I used to have on the Store. I can see Twidroid free but not Twidroid Pro (which seeing as I've paid for it I'd rather like to download again!) I also can't see Space Physics - again I can see the lite version but I've paid for the full game and that's not showing anywhere.
I can see other programs that I've previously purchased & able to download (CoPilot, Retro Defence) but it's irritating in the least to not get the full versions of other programs I've paid for already.
m_memmory said:
Well I've downloaded and installed the update - I'm one of those "strange" fellows who assumes that an update should just be applied as it will "update" things.
What have I found:
No real differences to anything at all. I did have a bug whereby the browser would start turning itself off randomly (both WiFi and 3G and with 1 or more tabs open & many different sites so no idea what caused it - happened both straight after a reboot and also when been left on for a few days) This no longer seems to be happening.
My main bugbear with it now is that I've found that I can't see all the programs that I used to have on the Store. I can see Twidroid free but not Twidroid Pro (which seeing as I've paid for it I'd rather like to download again!) I also can't see Space Physics - again I can see the lite version but I've paid for the full game and that's not showing anywhere.
I can see other programs that I've previously purchased & able to download (CoPilot, Retro Defence) but it's irritating in the least to not get the full versions of other programs I've paid for already.
Click to expand...
Click to collapse
I wouldn't worry about that. It sometimes happens when a carrier releases an update. They need to 'validate' it with the big G before it gets access to protected/paid apps...
m_memmory said:
Well I've downloaded and installed the update - I'm one of those "strange" fellows who assumes that an update should just be applied as it will "update" things.
What have I found:
No real differences to anything at all. I did have a bug whereby the browser would start turning itself off randomly (both WiFi and 3G and with 1 or more tabs open & many different sites so no idea what caused it - happened both straight after a reboot and also when been left on for a few days) This no longer seems to be happening.
My main bugbear with it now is that I've found that I can't see all the programs that I used to have on the Store. I can see Twidroid free but not Twidroid Pro (which seeing as I've paid for it I'd rather like to download again!) I also can't see Space Physics - again I can see the lite version but I've paid for the full game and that's not showing anywhere.
I can see other programs that I've previously purchased & able to download (CoPilot, Retro Defence) but it's irritating in the least to not get the full versions of other programs I've paid for already.
Click to expand...
Click to collapse
Thanks for the reply, frankly I haven't come across the bug on my browser, which goes to say, I won't need this update.
Shahin
I have just installed this and there are no real differences except they have added a 4x4 (i.e. the whole screen) People widget, and increased the size of the thumbnails on the People widget.
Tristan
Applied this update. Readme did not work. Now my headphone connection autosense is fsuked. HTC still haven't confirmed the changelog.
Hi,
I am new here and I am Hichjacking this thread, as my problem is in regards to the ROM Update on Orange.
As someone posted in this thread earlier, I do have the same issue that some of my paid apps are no longer available for me. ie Silent time, my backup pro.
I was able to get my MyBackup Pro online, however Silent time pro is not available. Is this also probably because its not approved for the new ROM update yet, although its not nearly 2 weeks old.
I can live without the other ones, but I loved Silent time Pro.
Can anyone help me and shed some light?
Markus
I've tried every possible solution to the limited Android Market issue and no success. I have a stock rooted NOOKcolor with MN 4-6-16. My husband has the same. Apps that we had installed previously from the Android Market, even ones we've purchased, show as not compatible with our device now.
I know I should list all of the suggested solutions I've tried... Maybe tomorrow... Just very frustrated right now!
...
Okay, I realize I can't post this without more info... I've tried:
- Changing the LCD Density to 160.
- Changing the device info in build.prop
- All of the clear cache/data, etc. for Google Framework and Market.
I've tried even more things that aren't coming to mind right now.
Fortunately, I had a backup of all the apps I need, but it is just bugging me that I can't access Facebook for Android, Friendcaster Pro, etc. from Android Market.
Curious if others are continuing to have a problem with Android Market like we are?
I have to say, I think I'm buying an iPad 3 when it is available, so I don't have to deal with a rooted device any longer! Arghhh!
Same issue. Stock rooted 1.3. Tried changing LCD density to 160, 161, 200, 240, etc. Changed build.prop to HTC and Samsung. Cleared cache data from market and Google Framework. Same problem. Missing some very basic apps due to compatibility.
Based on what I've seen in various posts, seems like there are two other options that I'm thinking about trying:
1) Downgrade the market. I have 3.3.11 right now. I could be wrong, but I believe I read that older versions have less compatibility issues. I found an apk for a 3.0 version (or something around that - I don't have it right in front of me). Problem is, I'm not sure how to a) remove the old market, b) install the new one, or c) stop it from updating (which I think has to be done).
2) Downgrade to stock 1.2 It seems that most of the problems are associated with 1.3 (is that your case?). 1.2 isn't available on the B&N site anymore, but there's a zip for it on this site. So I might try to downgrade to that and then root again to see if that improves the situation.
You could switch to CM7 (nightly 200 or higher or last stable release - 7.1).
allerretour38 said:
Same issue. Stock rooted 1.3. Tried changing LCD density to 160, 161, 200, 240, etc. Changed build.prop to HTC and Samsung. Cleared cache data from market and Google Framework. Same problem. Missing some very basic apps due to compatibility.
Based on what I've seen in various posts, seems like there are two other options that I'm thinking about trying:
1) Downgrade the market. I have 3.3.11 right now. I could be wrong, but I believe I read that older versions have less compatibility issues. I found an apk for a 3.0 version (or something around that - I don't have it right in front of me). Problem is, I'm not sure how to a) remove the old market, b) install the new one, or c) stop it from updating (which I think has to be done).
2) Downgrade to stock 1.2 It seems that most of the problems are associated with 1.3 (is that your case?). 1.2 isn't available on the B&N site anymore, but there's a zip for it on this site. So I might try to downgrade to that and then root again to see if that improves the situation.
Click to expand...
Click to collapse
I tried downgrading the Market by doing "Uninstall Updates" within NookColor Tools > Manage Applications and then used the "Freeze" option in Titanium Backup. I had the old green market, but still didn't see any more applications--at least not the ones I tried finding. I didn't wait to see if things changed if I left it at the old market for awhile.
I don't want to go back to 1.2, because I subscribe to some of the newer magazines that require 1.3.
Fortunately, I had all of the apps backed up, so when I got my warranty replacement NC (which I had to get another replacement for!), I'm not missing any apps, but I won't be able to update any of them.
patruns said:
You could switch to CM7 (nightly 200 or higher or last stable release - 7.1).
Click to expand...
Click to collapse
With CM7, you lose the standard B&N features, tho. Like the delivery of periodicals, kids books, Library app, Shop app, etc. I subscribe to a daily newspaper and a few monthly magazines, so I like the automatic delivery feature; and I have a grandson who enjoys the B&N kids books on my NC.
Just seems like there should be a fix that actually works with a stock rooted/manual nootered device.
Well, that didn't work too well. I installed 1.2 and that brought back all my normal apps. Plus I was able to install netflix, which is why I started this whole odyssey in the first place. But the first time I went to re-boot it, I found myself in an infinity loop on start up.
Thinking about finally going to CM7 now.
I'm having the same problems. I'm just using a workaround of downloading/updating the apps on my phone, saving the .apk to my sd card, using wifi file explorer to transfer the .apks to the nook and then installing. It sucks that the market wont work right but oh well
allerretour38 said:
Well, that didn't work too well. I installed 1.2 and that brought back all my normal apps. Plus I was able to install netflix, which is why I started this whole odyssey in the first place. But the first time I went to re-boot it, I found myself in an infinity loop on start up.
Thinking about finally going to CM7 now.
Click to expand...
Click to collapse
The boot loop could be caused by Flash auto-updating, if you happen to have it set to auto update. I know that can be an issue with 1.3, anyway. There is a fix in this forum that includes uninstalling and installing from the market.
Yeah, if I didn't like the B&N features, I'd definitely go to CM7.
Good luck!
bullfrog527 said:
I'm having the same problems. I'm just using a workaround of downloading/updating the apps on my phone, saving the .apk to my sd card, using wifi file explorer to transfer the .apks to the nook and then installing. It sucks that the market wont work right but oh well
Click to expand...
Click to collapse
Good workaround! My NC is the only Android device I have, so not an option for me, unfortunately.
First of all, thanks to nmyshkin and all the other folks who have put in the time and effort both to develop tools and solutions for the NST and to document the process to share with others. I wanted to document my own recent experience in case it’s of any help to anyone with similar issues.
A little background: I've been using a NST since 2011, which my (US-based) parents bought for me at the time. I've usually kept wifi turned off, except to occasionally connect in order to sync the clock, and I've sideloaded books from my Mac using Adobe Digital Editions and Calibre.
I'd originally written here that I'd never rooted the device; however, years ago I did remove the two default User Guide books from the library. Unless there's a way to do this without root, or unless I just hid the books on a shelf and then forgot about them, then I must have rooted it at the time, at least temporarily.
In 2013, I cracked the device's screen, so I picked up a used on on eBay and swapped the guts from my old one to the chassis of the new one. At least I think that's what I did...it was some time ago, and I didn't document the process.
At any rate, on to the present.
In the evening on 2022-04-26, I took out my NST to read a book, and I was greeted by the “new device” sequence of prompts (as if my device had never been used and needed to be set up for the first time). I believe that the first page I was shown was language selection, but I never saw this page again in this entire process, so I cannot be sure. I stepped through the menus (accepting agreement, choosing time zone, connecting to wifi), but after connecting to wifi, I got a “Network Error” and could not proceed.
Taking to the internet, I found out that this error is usually related to B&N servers no longer being online, and that I should try to bypass the registration entirely. The directions given for this involved factory resetting to get to the Welcome page, holding the top right page turn button and swiping the top of the screen left to right, tapping the Factory button that appears, holding the top right page turn button and tapping the lower right corner of the screen, and finally tapping the "Skip Oobe" button that appears. I found these directions in the following sources, among many others:
https://www.reddit.com/r/nook/comments/ex61b3
I should note that at no point in this entire process was I ever able to get the hidden Factory button to pop up, despite finding these directions all over the internet. I attempted to factory reset several times (reboot and immediately press the two lower page turn buttons as soon as the screen flashes), attempted to factory re-image using NookManager (https://forum.xda-developers.com/t/nst-g-updating-nookmanager-for-fw-1-2-2.3873048/), and while these resets were successful, I never was able to access the hidden Factory menu at the welcome screen.
I also at this time downloaded and manually installed the Nook 1.2.2 update from B&N, in case I had not done so before (https://help.barnesandnoble.com/app/answers/detail/a_id/4212/~/having-trouble-connecting-to-your-nook?#ManualDL). To make the update happen automatically, I copied the file to the Nook’s internal storage from a computer, put the Nook to sleep, and waited a minute or two until the Nook found the file and started the update. B&N says that this update is necessary to allow connection to their servers, so it seemed like a logical thing to do; however, at this point, this update neither gave me access to the Factory menu nor allowed me to register my device on the B&N servers.
Doing some more reading, I found that UK devices were cut off from their servers a few years ago, and some industrious people came up with a ways to use these devices anyway, the most common being to replace the Nook’s firmware with the US firmware using the “Nook Region Changer” SD card, which is based on clockworkmod (CWM).
https://forum.xda-developers.com/t/nst-g-dealing-with-non-us-aka-uk-devices-in-2021.4233411/
https://web.archive.org/web/20210821235751/https://sites.google.com/site/xcdguides/nook/nookregion
https://forum.xda-developers.com/t/nst-g-update-fw-1-2-2-uk-unofficial.4360889/
I decided to give this a try, in case my device happened to be a UK or other international device (although I was fairly certain it was US based, because I am located in the US and the device listed time zones from the US…though I suppose it could have been Canada?). The directions I followed were a mix of the second and third links above:
I downloaded the nook_region_changer file (from the first of the three links above) and used Etcher to make a bootable microSD
I followed steps 3-10 in the third link from nmyshkin: power down, boot into CWM, backup, wipe dalvik cache, wipe data/factory reset
I then switched to steps 7-9 in the second link (archive.org): install rom_backup.zip, install nook_1_2_update_US_CWM.zip, reboot twice
Following these steps, I was now getting a slightly different welcome screen when I booted into the Nook firmware, which matches the one in the YouTube video cited earlier in this post, except without the Back button. Unfortunately, I did not take a picture of what my screen looked like before this flash (though I’ve done a little digging into this, which is toward the bottom of this post). Nonetheless, I was still unable to access the hidden Factory menu, and I was also unable to register the device with B&N.
I then decided to apply the B&N 1.2.2 update once again, copying the file to the Nook’s internal storage and putting the Nook to sleep so that it could update. Following this update, the Welcome screen remained the same, and the hidden Factory menu was once again inaccessible. However, this time, my device was able to connect to the B&N servers, and I was able to finish setup.
Things now seem to be in working order.
—————
Some thoughts from afterward:
I’m not sure why my device decided to re-initialize in the first place, as I’ve been using it for the past decade or so, I always keep my Nook’s wifi turned off, and I had sideloaded a book to the device just a few days earlier, opened the book at that time, and everything had been working normally.
I wonder if the Factory menu is only available on international Nook devices. I have no idea why I was never able to access this menu throughout the process, though I did find one other user who had the same problem a couple of years ago (this was the post that pointed me at the nmyshkin custom UK firmware post that became a part of my solution in the end): https://forum.xda-developers.com/t/nook-simple-touch-network-problem.4130461/
This user was also based in the US, so it’s possible that my hypothesis about the Factory menu being inaccessible from US firmware is correct; however, I would have to install some other firmware to check, and as my device is finally working, I don’t want to risk it.
I believe that what clued me in to needing to update to the latest B&N firmware (despite this not solving things once before) was this post by nmyshkin in another thread: https://forum.xda-developers.com/t/...mple-touch-update-1-2-2.3971367/post-80341393
On that note, I don’t know why my device was unable to register after the first time I applied the B&N firmware update.
It’s possible that my device wasn’t a US-firmware device. As I mentioned briefly at the beginning, my original Nook was a gift from my parents in 2011 (and thus was probably a US device), but its screen became damaged and I purchased a second one from eBay. I don’t recall what was wrong with the second one (maybe a bad battery, maybe something else?), but I do remember taking both devices apart and mixing the two of them as I put them back together, presumably to use the good screen from one and…something…from the other. So there’s a chance that the brains of this device are from the second Nook, though it seems unlikely, as my B&N account (through a computer web browser) showed the serial number of this device as having been registered in 2011, which is when I got the first Nook (which was presumably a US device). It also seems likely that I'd have wanted to keep the working internals from the old device and just use the screen from the new one.
A second thought on the unable-to-register-the-first-time-I-updated-my-Nook problem. As I mentioned above, I was getting a slightly different Welcome screen on my device prior to flashing a different firmware with Nook Region Changer. I did not take any pictures at the time, but I believe the old screen looked like this (https://u-mercari-images.mercdn.net/photos/m86876116644_1.jpg?1598739388), and the new one looked like this (https://shopgoodwillimages.azureedge.net/production/48/8-9-2021/35449379212449Nele.JPG). These images are attached to this post, with “Welcome to your all-new NOOK” for the old Welcome screen and “Welcome to your NOOK Simple Touch” for the new. What is also interesting to me is that the other person I found online who was unable to access the hidden Factory menu on the welcome screen (see link above) mentioned the old text, “Welcome to your all-new NOOK,” in their description as well.
Perhaps this is a much older firmware? I wasn’t able to check, because I couldn’t get into a working Nook to look at its version. I remember seeing the announcement a few years back that 1.2.2 would be necessary and that I would need to update if I wanted the device to continue working. I’m not sure whether or not I ever did that, but it seems likely considering I remember the post. One theory is that perhaps if a NST is running a very old firmware, it is unable to directly update to 1.2.2 and requires intermediate updates, which could be why flashing the firmware using Nook Region Changer allowed the later update to 1.2.2 to happen successfully. This would also explain why, after the first time I installed the 1.2.2 update in this most recent series of events (prior to the Nook Region Changer flash), I was still unable to register (and I still had the old Welcome screen).
the.sting said:
I wonder if the Factory menu is only available on international Nook devices.
Click to expand...
Click to collapse
No, it should be available from all devices in general working order. Clearly something else was going on with yours.
the.sting said:
This user was also based in the US, so it’s possible that my hypothesis about the Factory menu being inaccessible from US firmware is correct; however, I would have to install some other firmware to check, and as my device is finally working, I don’t want to risk it.
Click to expand...
Click to collapse
It ain't broke (now). So leave it be. But...I would definitely use NookManager to make a backup. You don't have to root in order to do that (I think).
the.sting said:
It’s possible that my device wasn’t a US-firmware device. As I mentioned briefly at the beginning, my original Nook was a gift from my parents in 2011 (and thus was probably a US device).
Click to expand...
Click to collapse
The differences are subtle, but since you've flashed the UK version now, the point is moot. The opening screen on the US version is the Welcome screen. The opening screen on the UK version is the Language picker, followed by the Welcome screen. Alas, I didn't pay that much attention to any differences in the Welcome screens between the two versions so your attached images don't ring any bells.
In the UK version the dictionary is the Oxford English and the Settings app is a little more expansive, including a dictionary management section (which does not work). Also, the locale or language picker is not fixed on "US English".
the.sting said:
One theory is that perhaps if a NST is running a very old firmware, it is unable to directly update to 1.2.2 and requires intermediate updates, which could be why flashing the firmware using Nook Region Changer allowed the later update to 1.2.2 to happen successfully. This would also explain why, after the first time I installed the 1.2.2 update in this most recent series of events (prior to the Nook Region Changer flash), I was still unable to register (and I still had the old Welcome screen).
Click to expand...
Click to collapse
I have never heard anything like this, but as they say, anything is possible (though I doubt this one).
Wow. You've been on quite a ride! I'm glad if anything I put together was helpful. Again, I strongly suggest a backup. It's possible there is a hardware fault in the device that caused it to run a factory re-image. If that happens again, a backup to restore would be handy.
Thanks, nmyshkin! Your posts were incredibly helpful in navigating my way through this.
It sounds like I must have had a US version previously. I have a fuzzy memory that I may have had the language picker the first time I found my Nook in the initialization sequence, but at that point I was just trying to get through it to use the device again, so I wasn't paying that much attention. But every subsequent time that I factory reset it, it went straight to the welcome screen.
I'm actually currently running the US firmware; I flashed the US image that comes with the Nook Region Changer package rather than the custom UK one that you put together. The custom UK one was the next thing I was going to try, but the device allowed me to register after the flash and subsequent update, so I never got there.
I did run a backup using the clockworkmod tools in Nook Region Changer prior to making that flash, which resulted in several files being generated on the SD card (see attached image -- the times are wrong, but the files with "Today" timestamps are presumably the ones generated by the backup). I'll make sure to perform another backup now that things are working. Would you suggest I use NookManager rather than clockworkmod?
I still have no idea why I was never able to get the Factory button to appear, but it sounds like the "Skip Oobe" workaround has its downsides anyway, so I'll stick with what's working now.
Thanks again!
the.sting said:
I did run a backup using the clockworkmod tools in Nook Region Changer prior to making that flash, which resulted in several files being generated on the SD card (see attached image -- the times are wrong, but the files with "Today" timestamps are presumably the ones generated by the backup). I'll make sure to perform another backup now that things are working. Would you suggest I use NookManager rather than clockworkmod?
Click to expand...
Click to collapse
It has been said, but I cannot verify, that the CWM backups are not "complete". They are certainly better than nothing. The NookManager backup is a single file "image". That's the not-too-impressive extent of my knowledge on that score. I have used CWM backups to restore other devices before, so I might just be all wet on this topic.
the.sting said:
I still have no idea why I was never able to get the Factory button to appear, but it sounds like the "Skip Oobe" workaround has its downsides anyway, so I'll stick with what's working now.
Click to expand...
Click to collapse
I actually had a thought about that after my post. I've never used the hardware buttons for page turns. Never saw the sense. I have them assigned to various other functions but don't use them often. So I could be caught off-guard if, for example, one of them just decided not to work any more.....like the upper right one? Just a thought, but it's probably too easy!
Good to know, I'll look into making a NookManager backup.
nmyshkin said:
I actually had a thought about that after my post. I've never used the hardware buttons for page turns. Never saw the sense. I have them assigned to various other functions but don't use them often. So I could be caught off-guard if, for example, one of them just decided not to work any more.....like the upper right one? Just a thought, but it's probably too easy!
Click to expand...
Click to collapse
I hadn't considered this, as I also barely use the hardware buttons on the sides. But you seem to be spot on...I just checked, and the top right button is the only one of the four that isn't working for page turns either! Sometimes the simplest explanations turn out to be right.
Thanks again!
You can use UsbMode.apk (in the sig) to check the action of physical buttons (or USB or Bluetooth).
I don't use WiFi, I use a little utility to sync the time whenever I sync content over USB.
Such a utility is dependant on the exact syntax of the date command and the ability to directly get a # prompt without using "su".
nmyshkin said:
It has been said, but I cannot verify, that the CWM backups are not "complete". They are certainly better than nothing. The NookManager backup is a single file "image". That's the not-too-impressive extent of my knowledge on that score. I have used CWM backups to restore other devices before, so I might just be all wet on this topic.
Click to expand...
Click to collapse
In light of the fact that my top right page turn button doesn't work, do you have any thoughts on the NookManager backup process? Unfortunately, "Format remaining space on SD card" (which seems to be a precursor to making a backup) is selected by that top right button.
the.sting said:
In light of the fact that my top right page turn button doesn't work, do you have any thoughts on the NookManager backup process? Unfortunately, "Format remaining space on SD card" (which seems to be a precursor to making a backup) is selected by that top right button.
Click to expand...
Click to collapse
I should have seen that coming
I've been here before with another member, different button, same general issue. That time it was NookManager-1, nmyshkin-0.
The device has 6 hardware buttons. Whether it will recognize input from the remaining two with the instruction set that is loaded at boot remains to be seen. I've got a busy day, but it's the kind of busy that will allow my mind to wander. I'll see what turns up. Try not to have a device meltdown today.
the.sting said:
In light of the fact that my top right page turn button doesn't work, do you have any thoughts on the NookManager backup process? Unfortunately, "Format remaining space on SD card" (which seems to be a precursor to making a backup) is selected by that top right button.
Click to expand...
Click to collapse
OK, this time around the little grey cells have triumphed!
Do you know about ADB? If not, this will not do you much good, although it's fairly easy to install a minimal ADB package on a Windows machine (if you have one).
Anyway.....
It's possible to synthesize a button press using ADB, and NookManager gives you the option to start up ADB before you do much of anything else. Except there is a catch. The button that starts WiFi so you can connect with ADB is---you guessed it---also your dead button.
Not to worry. The left buttons are unused on that menu screen and I can easily alter that menu for you. All you would need to do is replace the file on the card with the altered one.
Then once WiFi is started, you have the option to start ADB (a left button) and are given the IP address to connect to.
The ADB command for sending a press of your non-working button is:
Code:
adb shell sendevent /dev/input/event0 1 407 1
(those are zeroes--both of them)
This would enable you to access the entire NookManager menu system (if the need ever arose), including the backup and restore functions. You just need to send that code each time you should press that dead button.
But you'd need ADB to do it.
Let me know if you want to pursue it. If this seems like too much for too little, keep your CWM backup safe somewhere. As I said before, I've used them to restore other devices.
Wow, thank you so much for putting the thought into this! I haven't worked with ADB, though it's something I would definitely be interested in investigating (I like to tinker). That said, I'm stretched a little thin to really dive in at the moment...getting married soon and otherwise a bit swamped with work.
I'll definitely save the CWM backup for now. Can I ping you here again if I'm interested in working on this later?
Thanks again!
the.sting said:
I'll definitely save the CWM backup for now. Can I ping you here again if I'm interested in working on this later?
Thanks again!
Click to expand...
Click to collapse
Absolutely. Congratulations on your approaching wedding!