Hidden wifi networks are not showing and not able to connect, even after adding it manually.
Plz help...
I am on Android 9 Pie October Security patch...
Thanks in Advance...
How do you know they're there ... if they're hidden
pythonista_droid said:
How do you know they're there ... if they're hidden
Click to expand...
Click to collapse
I hide my own wifi network and then I check...It's not showing even after Adding it manually in settings..
Plz Help me..
You realise that the fastest solution is to simply "unhide" your router and connect to it that way. I cannot fathom why you would even want to hide a network. Just give it some really obscure and meaningless name.
pythonista_droid said:
You realize that the fastest solution is to simply "unhide" your router and connect to it that way. I cannot fathom why you would even want to hide a network. Just give it some really obscure and meaningless name.
Click to expand...
Click to collapse
Ya...But what about other networks that are hidden in my area which I want to access.
plz, tell me the solution what to do with Wifi...
Well - there we get down to the truth at last - it's not your hidden network - it's other peoples. Well - they hid it for a reason and there's likely no chance of you accessing it from a phone. If you want to do stuff like that, you'll need a real hackers toolkit - learn Linux and Metasploit. Good luck.
Related
If I press wlan button in Comm Manager than WiFi should be ON but it is not. I did use some different roms but still nothing. Somebody know what to do ?
settings-connections-wireless lan - there is only message:
Wireless LAN is OFF.Turn on Wireless LAN.
It does not work. Please help me.
Go back to wm5. If your lucky it might come back. The more I dig through here the more I see people with wifi problems after flashing. You might be out of luck
HOWEVER
I noticed under WM6 the bubble that pops up when you click on the wifi tower ALWAYS says 'turn on wifi'
Good luck!
Same problem with my WI-FI, Not working please help!!!!
Hi All. I am facing the same problem with my WI-FI as Vomithaus is having. Whenever I try to to connect to WIFI from Commmanager, it tries to and then to show disconnected. When i go to settings> Wireless LAN, it asks me to "Configure Network Adaptors", and lists all the adaptors and going into them asks about the ip settings and stuff like that. By the Way I Bricked my phone once and then i flashed with T-Mobile Ship WM6.0 RUU for the WING. And I strongly suspect that the registry setting are not right or the Radio ROM is F***ed up. Can any knowledgeable person help me please? I would greatly appreciated any help.
Same problem with my WI-FI, Not working please help!!!!
This is the addeneum to the last post. The last remaining screenshot for the above post. The last screen shot of the "Wi-Fi Status" in the "Settings > Connection", gives me an option to "Turn on Wi-Fi" but toggeling it results in nothing. Thank You everybody for your time and consideration.
It might help us to figure out how this happened too. I bought the EXEC off of ebay and it was like this from the get go. The previous owner flashed it to wm6 about 1 month ago, but said it was working fine... all he did was hard reset to get rid of the personal information. I want to believe him, but there are a few people on here complaining of flashing the exec and losing wifi. (even the official rom from O2).
Flashing COULD have damaged the transmitter, but it seems more likely that a setting is wrong somewhere (especially since there is a slider bar for WIFI battery vs performance).
This is good news (somewhat), but the bad news is that if there is one, no one knows about it. I have messed around in the registry (there were some promising entries related to POWER), but nothing that even showed a response. I found the entry that connects to the slider bar, but PERFORMANCE = zero, so there is nowhere to go there but WORSE.
This really sucks, is all I can say. I blew $500 on something that is useless (well... not useless, but no WIFI? WHY COULD IT HAVE NOT BEEN BLUETOOTH!)
Another step I have taken is contacting PPC Tech's via email and asking them if they have any idea how to repair it, and how much $$$
I'll keep you informed.
Can you tell me if yours EVER worked, and if so, when it stopped?
I just looked closer at your screenshots.... Do you have a WIFI card? (it say's 'adapter').
No, I dont have a WIFI card but this is way how windows handles all is peripherals (services), as an add-on card. just like you laptop.
Guys, There is a registry fix for this problem.
Please take look here :
http://forum.xda-developers.com/showpost.php?p=1475527&postcount=14
Ron
I am afraid Ron that this is not a case as suggested in Beowulf6's solution. If it is the solution I dont know how to exactly implement it. But I am posting here the exact registry key screenshot for you guys to take a look also. I can't see and TNETWLN1 or TNET12345 key here in my device. I still think it has to something with the registry. Can any one here with a T-Mobile WING verify and post their screen shot? or maybe send me a registry backup to compare with? It would be really grateful it some does that. Thanks everybody for a few seconds to read this.
In my herald i can't see TNETWLN1 or TNETWLN12345 too.
I did use Mobile Registry Editor for that , what you guys are useing?
(sorry for my English, if you dont understand me just tell me please)
Look at the screenshots, there a Reg Folder with the name WLAN, open it, and then open the key with all the numbers and letters. At the end of that line is a code. TNETWLAN1 is what it should be for the Herald.
f_v_man said:
I am afraid Ron that this is not a case as suggested in Beowulf6's solution. If it is the solution I dont know how to exactly implement it. But I am posting here the exact registry key screenshot for you guys to take a look also. I can't see and TNETWLN1 or TNET12345 key here in my device. I still think it has to something with the registry. Can any one here with a T-Mobile WING verify and post their screen shot? or maybe send me a registry backup to compare with? It would be really grateful it some does that. Thanks everybody for a few seconds to read this.
Click to expand...
Click to collapse
It is like Bio88 says.
You are already on the right track... click on WLAN and you will find the key.
Change the value of the key into TNETWLAN1
Done
bio88 said:
Look at the screenshots, there a Reg Folder with the name WLAN, open it, and then open the key with all the numbers and letters. At the end of that line is a code. TNETWLAN1 is what it should be for the Herald.
Click to expand...
Click to collapse
Hi Please look at my screen shot again clearly. I did post what is inside the WLAN folder. There are only two keys :
1) (Default) \Windows\ctlpnl.exe
2) CmdLine cplmain17
I still can't figure where is the key with numbers and letters. Sorry If I am a bit dumb or wrong. Thanks.
it is possible if you use the default Commanager that you dont have this registry key.
I dont know if it helps if you create it on your own.
but for me where i installed a different commanager, the Key was there and i edited it for the wlan button.
My Tmo Wing has "TIACXWLN1" in that registry key.
Do those changes apply to the herald and the Wing interchangeably?
Is there an option/software to display the Network info ??
I mean to say,
Is it possible to get the location name info of the place iam, from the service provider.
This option seems to be common in most GSM phones.
They show the location you are.
Is it possible to get the same in my Hermes?
i'm sure we have those softwares....
but, i cannot tell the name cause i only know it's name of Chinese...
sorry
ss1271 said:
i'm sure we have those softwares....
but, i cannot tell the name cause i only know it's name of Chinese...
sorry
Click to expand...
Click to collapse
Good to hear that there is a software for that purpose.
But, its really sad that its in chinese
Pls somebody help me.
I need it badly
Um, isn't what you're after just the cell broadcast feature? Under the 'more' tab in your phone settings you can enable broadcast. I have found that it works fine with 2G or normal 3G networks, but when i'm on a HSDPA connection, it won't work.
I think the batterystatus plugin can then display it on the today screen so you don't have annoying messages popping up every 30 seconds, but i can't remember exactly.
How/What do I enable to see my Touch in Vista Network Map?
EDIT:
I will have to install LLTD Responder on my Touch to do this.
But how?
AFAIK There is no way to do this. Why would you want to? I don't see a point to this..
GldRush98 said:
AFAIK There is no way to do this. Why would you want to? I don't see a point to this..
Click to expand...
Click to collapse
So that i can see which device is currently connected to my router.
your routers firmware should also offer the ability to see what mac adress's are connected
Rudegar said:
your routers firmware should also offer the ability to see what mac adress's are connected
Click to expand...
Click to collapse
Yes. I can see that.
But now i have to login to my router to see if my Touch is connected.
That's why i want to be able to my Touch in Vista's Network Map like my other devices.
I tried to use the Internet Sharing option when connecting to a laptop - just like I did with the original ATT Tilt - but I always get Invalid APN. Does everybody get the same and is there a work-around?
tethering
check to see (upon running Internet Sharing)
under Network Connection
my TP2 shows 2 options
MEdia Net
and one for GPRS A&T
the only one that works for me it MEdia Net
please post if you have those options and if it worked.
internet sharing
OK
Thanks for posting the issue with internet sharing
Here's the fix
Use reg edit and change these values:
HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING\LASTCELLCALL CHANGE TO "MEdia Net"
HKLM\Comm\InternetSharing\ForceCellConnection change to "MEdia Net"
AT&T blocked option to change connection type so you have to change that in reg.
Now just softreset and enjoy.
PS
I'm using it right now
tether tweak cab for att stock?
emilware_v1.1 said:
OK
Thanks for posting the issue with internet sharing
Here's the fix
Use reg edit and change these values:
HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING\LASTCELLCALL CHANGE TO "MEdia Net"
HKLM\Comm\InternetSharing\ForceCellConnection change to "MEdia Net"
Click to expand...
Click to collapse
Hey I don't have my Tilt 2 yet so I can't test this but I cabbed up your changes. Maybe one of you with Tilt2 MEdia Net could test this sucker out? First make sure you are currently unable to tether and then install and soft reset to see if it fixed it. Report back!
edit: cab removed, report of no success
Doug
d0ugie said:
Hey I don't have my Tilt 2 yet so I can't test this but I cabbed up your changes. Maybe one of you with Tilt2 MEdia Net could test this sucker out? First make sure you are currently unable to tether and then install and soft reset to see if it fixed it. Report back!
Doug
Click to expand...
Click to collapse
Doug, it didnt work for me...
This is the correct reg
"HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING\LASTCELLCONNECTION CHANGE TO "MEdia Net""
I updated it manually and it doesnt stick. Its forcing me to the other APN still....
bhyde said:
Doug, it didnt work for me...
This is the correct reg
"HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING\LASTCELLCONNECTION CHANGE TO "MEdia Net""
I updated it manually and it doesnt stick. Its forcing me to the other APN still....
Click to expand...
Click to collapse
Thanks for reporting back, removed the cab from my post. So yours is the correct key but it doesn't stick.... hmm. Sounds like flashing a custom rom might be the only way out unless you put a registry tweaking thing in startup.
I just tried this using AT&T Tilt 2 on the stock ROM and it worked.
I could not find any such key called "HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING" so I ignored that part.
I changed HKLM\Comm\InternetSharing\ForceCellConnection to "MEdia Net".
I reset the phone.
I tried to share through a USB connection, but it kept appearing on my computer as a hard drive despite selecting the option for Internet Sharing.
So instead I tried sharing through Bluetooth PAN. It was actually easier than it used to be on WM6.1. I selected Connect from the Internet Sharing program and it brought up a list of Bluetooth pairings. I selected my laptop (win7), which I had previously paired for ActiveSync purposes. The phone said "connecting to computer" and then "connecting to internet" and then it was done.
I accessed websites on my computer and refreshed to make sure it wasn't cached. I checked that my computer's wifi was disabled and that the phone's wifi was not on. Looks like it works.
HKLM\Comm\InternetSharing\Settings\ForceCellConnection to "MEdia Net"
and
HKLM\Comm\InternetSharing\Status\Enabled to "1"
I changed HKLM\Comm\InternetSharing\Settings\ForceCellConnection to "MEdia Net" and it worked. Thanks for the help.
Question...on the stock ROM, does the built-in connection use the wap.cingular connection or the isp.cingular?
I heard it was wrong to use isp.cingular. Should we create a new profile specifically for wap.cingular?
emilware_v1.1 said:
OK
Thanks for posting the issue with internet sharing
Here's the fix
Use reg edit and change these values:
HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING\LASTCELLCALL CHANGE TO "MEdia Net"
HKLM\Comm\InternetSharing\ForceCellConnection change to "MEdia Net"
AT&T blocked option to change connection type so you have to change that in reg.
Now just softreset and enjoy.
PS
I'm using it right now
Click to expand...
Click to collapse
It Works!!!
thanks
Thank You! I am using it now.... Only After installing TotalCommander ( in the Rhodium Software sticky) to eaily do the regedits,
Worked for me. Nicely done!
emilware_v1.1 said:
OK
Thanks for posting the issue with internet sharing
Here's the fix
Use reg edit and change these values:
HKCU\SOFTWARE\MICROSOFT\INTERNETSHARING\LASTCELLCALL CHANGE TO "MEdia Net"
HKLM\Comm\InternetSharing\ForceCellConnection change to "MEdia Net"
AT&T blocked option to change connection type so you have to change that in reg.
Now just softreset and enjoy.
PS
I'm using it right now
Click to expand...
Click to collapse
This method worked for me. Thankfully I have a tetherable TP2 now ^^...only thing is the connection sucks until AT&T fixes their network. Takes forever to load a simple page....
Why can i not find the HKLM folder in total commander.... cause id love to be able to tether my phone....
hixmatt said:
HKLM\Comm\InternetSharing\Settings\ForceCellConnection to "MEdia Net"
and
HKLM\Comm\InternetSharing\Status\Enabled to "1"
Click to expand...
Click to collapse
That works great for me, but after soft reset "HKLM\Comm\InternetSharing\Status\Enabled" reverts back to Value of "0". To use Internet Sharing, I have to edit this value after every soft reset. Any possible fixes for this? Thanks in advance!
Stock AT&T Tilt 2
Edited To Add: It finally stuck! No idea why it took so long.
calexan said:
Why can i not find the HKLM folder in total commander.... cause id love to be able to tether my phone....
Click to expand...
Click to collapse
Doesn't sound like your ready to play with registry (no offense). Always know you can cripple Windows if your not careful. You have to open the "\\Plugins" folder at the top of the root dir of the phone and then select registry. Follow the given instruction from there. Again though, be careful.
Oh im sure im not.... I dont think ive messed with a registry since my Moto v620 years ago. My Tre0 750, just had every cab i ever needed already made.
If its not sticking though... i guess theres really know point till someone figures this thing out. I hate how AT&T blocks certain features....
calexan said:
Oh im sure im not.... I dont think ive messed with a registry since my Moto v620 years ago. My Tre0 750, just had every cab i ever needed already made.
If its not sticking though... i guess theres really know point till someone figures this thing out. I hate how AT&T blocks certain features....
Click to expand...
Click to collapse
======== (UPDATED 11-30-2009) ========
NOTE! -- THIS IS ONLY FOR AT&T CUSTOMERS
I have made a cab version of my fix so that mortscript isn't required. Simply install and restart your phone and your ready to go! (much easier instructions eh?)
That's it!
Works great on my end.... other than AT&T's terrible internet service.
I appreciate the time you took to write the scripts. Havnt figured if they stick though, but now that its easily changed back no worries.
Thanks man
Hey guys,
I´m a absolutly newbie here, but i hope you can help me.
I got my Omnia 7 few days before and realized that i couldnt get mobile inet on it. So i would to ask whats my opinion to unlock it. (hope you arent so angry and sick cause of many posts like this)
I tried to jailbreak with ChevronWP7 but the programm says that it cant find any phone. then i startet to get a other rom on it and stucked by getting the download mode.
The phone os is on 7.0.7004.0 version.
I´m very thankfull for any help
@chevron hack
have you synced your phone with zune?
is your screen unlocked (phone) during you want to chevron it?
@no internet problem
Internet -> you have to type in the "apn settings" you find it under settings -> provider or anything like this, sorry have a german one
to know what you have to input, google for "apn settings <provider>"
Alternative way with the samsung tool (network profile) if it is in your rom.
@chevron hack
all done like in the tut, the screen blank on the main menu
@no internet problem
i´ll check it out know for the apn settings, found them before but got to the provider and he said that it is locked and i have to check out for unlocking or updating (something like this)
if you´re german, it´s fine for me to write in german ^^
how annoying sh**
got the internet problem, thanks 0711
just needed to add this 10 letters word in the settings
now another question, is it possible getting homebrew apps without chevron or better said, is there another possibility??
KauTschuk said:
now another question, is it possible getting homebrew apps without chevron or better said, is there another possibility??
Click to expand...
Click to collapse
No. Without Chveron, your only way of getting apps is through the MS marketplace.
so, what could be the problem that chevron can´t see my phone?
got the hole pogramm pack installed, registry key, the protocol installed but it won´t work
So, now i have some strange problems with the mobilenet. I have allways the icon of the connection, but the explorer, market ect. Cant get the connection. Now i am in school writting this in my phone, but i cant use the market. Some ideas to fix?
*Deleted, false threat*