gps freeze problems - Xiaomi Redmi 3s Questions & Answers

Hi everyone,
I often want to use google maps, but my phone acts completely odd.
In most cases when i start a navigation/routing, it gets the first location perfectly fine, but after a while can't follow up my driving. The position stucks at the initial position.
In some other cases (after reboot e.g.) it does work but freezes after a while or gets wrong locations.
i started logcat once gps was frozen, and my log is full of this, but i don't know if it has something to do with my problem:
Code:
11-04 14:08:31.065 457 457 E ANDR-PERF-TARGET: Error: Invalid logical cluster id 1
11-04 14:08:31.065 457 457 E ANDR-PERF-TARGET: Error: Invalid logical cluster id 0
11-04 14:08:31.065 457 457 E ANDR-PERF-TARGET: Error: Invalid logical cluster id 0
11-04 14:08:31.066 1306 1402 E LightsService: Unknown error setting light.
11-04 14:08:31.067 457 457 E ANDR-PERF-TARGET: Error: Invalid logical cluster id 1
11-04 14:08:31.067 457 457 E ANDR-PERF-TARGET: Error: Invalid logical cluster id 0
11-04 14:08:31.067 457 457 E ANDR-PERF-TARGET: Error: Invalid logical cluster id 0
11-04 14:08:31.066 457 490 E ANDR-PERF-MPCTL: Invalid profile no. 0, total profiles 0 only
11-04 14:08:31.067 457 490 E ANDR-PERF-RESOURCEQS: Failed to apply optimization [2, 0]
11-04 14:08:31.067 457 490 E ANDR-PERF-RESOURCEQS: Failed to apply optimization [2, 0]
11-04 14:08:31.067 457 490 E ANDR-PERF-TARGET: Eror: Target not initialized
11-04 14:08:31.067 457 490 E ANDR-PERF-OPTSHANDLER: Invalid core no. 0
11-04 14:08:31.067 457 490 E ANDR-PERF-OPTSHANDLER: Request on invalid core or cluster
11-04 14:08:31.067 457 490 E ANDR-PERF-RESOURCEQS: Failed to apply optimization [3, 0]
11-04 14:08:31.067 457 490 E ANDR-PERF-RESOURCEQS: Failed to apply optimization [2, 0]
11-04 14:08:31.067 457 490 E ANDR-PERF-RESOURCEQS: Failed to apply optimization [2, 0]
11-04 14:08:31.067 457 490 E ANDR-PERF-TARGET: Eror: Target not initialized
11-04 14:08:31.067 457 490 E ANDR-PERF-OPTSHANDLER: Invalid core no. 0
11-04 14:08:31.067 457 490 E ANDR-PERF-OPTSHANDLER: Request on invalid core or cluster
11-04 14:08:31.067 457 490 E ANDR-PERF-RESOURCEQS: Failed to apply optimization [3, 0]
11-04 14:08:31.340 457 457 E ANDR-PERF-TARGET: Error: Invalid logical cluster id 1
11-04 14:08:31.340 457 457 E ANDR-PERF-TARGET: Error: Invalid logical cluster id 0
11-04 14:08:31.340 457 457 E ANDR-PERF-TARGET: Error: Invalid logical cluster id 0
11-04 14:08:31.340 457 490 E ANDR-PERF-RESOURCEQS: Failed to apply optimization [2, 0]
11-04 14:08:31.341 457 490 E ANDR-PERF-RESOURCEQS: Failed to apply optimization [2, 0]
11-04 14:08:31.341 457 490 E ANDR-PERF-TARGET: Eror: Target not initialized
11-04 14:08:31.341 457 490 E ANDR-PERF-OPTSHANDLER: Invalid core no. 0
11-04 14:08:31.341 457 490 E ANDR-PERF-OPTSHANDLER: Request on invalid core or cluster
11-04 14:08:31.341 457 490 E ANDR-PERF-RESOURCEQS: Failed to apply optimization [3, 0]
11-04 14:08:31.341 457 457 E ANDR-PERF-TARGET: Error: Invalid logical cluster id 1
11-04 14:08:31.341 457 457 E ANDR-PERF-TARGET: Error: Invalid logical cluster id 0
11-04 14:08:31.341 457 457 E ANDR-PERF-TARGET: Error: Invalid logical cluster id 0
11-04 14:08:31.342 457 490 E ANDR-PERF-RESOURCEQS: Failed to apply optimization [2, 0]
11-04 14:08:31.342 457 490 E ANDR-PERF-RESOURCEQS: Failed to apply optimization [2, 0]
11-04 14:08:31.342 457 490 E ANDR-PERF-TARGET: Eror: Target not initialized
11-04 14:08:31.342 457 490 E ANDR-PERF-OPTSHANDLER: Invalid core no. 0
11-04 14:08:31.342 457 490 E ANDR-PERF-OPTSHANDLER: Request on invalid core or cluster
11-04 14:08:31.342 457 490 E ANDR-PERF-RESOURCEQS: Failed to apply optimization [3, 0]
Can someone guide me on how to tackle this problem?
Problem exists in LOS 15.1 and LOS 16, no other OS tested.
regards

i do not know anymore, sorry.
maybe switched to another rom.

Related

lots of linux_qmi_qmux_io_wake_lock/linux_qmi_qmux_io_wake_unlock

looking at my logcat I see lots of the following on Android 8.0
09-06 17:57:33.313 631 946 E QC-QMI : linux_qmi_qmux_io_wake_lock: Err in writing wakelock=qmuxd_port_wl_0, error [1 : Operation not permitted]
09-06 17:57:33.313 631 946 E QC-QMI : linux_qmi_qmux_io_wake_unlock: Err in writing wakelock=qmuxd_port_wl_0, error [1: Operation not permitted]
09-06 17:57:35.873 631 946 E QC-QMI : linux_qmi_qmux_io_wake_lock: Err in writing wakelock=qmuxd_port_wl_0, error [1: Operation not permitted]
09-06 17:57:35.874 631 946 E QC-QMI : linux_qmi_qmux_io_wake_unlock: Err in writing wakelock=qmuxd_port_wl_0, error [1: Operation not permitted]
09-06 17:57:37.153 631 946 E QC-QMI : linux_qmi_qmux_io_wake_lock: Err in writing wakelock=qmuxd_port_wl_0, error [1: Operation not permitted]
09-06 17:57:37.154 631 946 E QC-QMI : linux_qmi_qmux_io_wake_unlock: Err in writing wakelock=qmuxd_port_wl_0, error [1: Operation not permitted]
(slightly edited because this text editor screws with it)
surfing around a bit I found this commit for Nexus 5X
https://android.googlesource.com/device/lge/bullhead/+/95aa2b4e2d6c26ee1b37241bc22ec32a6382d3fb%5E%21/
which launches qmux as root instead of radio
maybe /init.angler.rc also needs this change ... any thoughts?
I have the same logs in my 6P. I have update today to last 8.0 update, October OPR5.170623.007 and those errors keep appearing...
Rooting with Supersu 2.82-SR5
have this problem too
8.1.0
The error still occurs with the november factory image. Version OPR5.170623.011
I have opened an issue report about this problem in Google Issue Tracker, please starred it
https://issuetracker.google.com/issues/67438793
In the new 8.1 version is not fixed the issue
Android 8.1.0 - OPM1.171019.011
Code:
8.1 is not fixed the issue :(
Android 8.1.0 - OPM1.171019.011
12-07 20:15:25.783 694 1105 E QC-QMI : linux_qmi_qmux_io_wake_lock: Err in writing wakelock=qmuxd_port_wl_0, error [1: Operation not permitted]
12-07 20:15:25.783 694 1105 E QC-QMI : linux_qmi_qmux_io_wake_unlock: Err in writing wakelock=qmuxd_port_wl_0, error [1: Operation not permitted]
12-07 20:15:25.784 694 1105 E QC-QMI : linux_qmi_qmux_io_wake_lock: Err in writing wakelock=qmuxd_port_wl_0, error [1: Operation not permitted]
12-07 20:15:25.784 694 1105 E QC-QMI : linux_qmi_qmux_io_wake_unlock: Err in writing wakelock=qmuxd_port_wl_0, error [1: Operation not permitted]
12-07 20:15:25.787 694 1105 E QC-QMI : linux_qmi_qmux_io_wake_lock: Err in writing wakelock=qmuxd_port_wl_0, error [1: Operation not permitted]
12-07 20:15:25.787 694 1105 E QC-QMI : linux_qmi_qmux_io_wake_unlock: Err in writing wakelock=qmuxd_port_wl_0, error [1: Operation not permitted]
12-07 20:15:25.789 694 1105 E QC-QMI : linux_qmi_qmux_io_wake_lock: Err in writing wakelock=qmuxd_port_wl_0, error [1: Operation not permitted]
12-07 20:15:25.789 694 1105 E QC-QMI : linux_qmi_qmux_io_wake_unlock: Err in writing wakelock=qmuxd_port_wl_0, error [1 Operation not permitted]
12-07 20:15:25.792 694 1105 E QC-QMI : linux_qmi_qmux_io_wake_lock: Err in writing wakelock=qmuxd_port_wl_0, error [1: Operation not permitted]
12-07 20:15:25.792 694 1105 E QC-QMI : linux_qmi_qmux_io_wake_unlock: Err in writing wakelock=qmuxd_port_wl_0, error [1 Operation not permitted]
12-07 20:15:25.796 694 1105 E QC-QMI : linux_qmi_qmux_io_wake_lock: Err in writing wakelock=qmuxd_port_wl_0, error [1: Operation not permitted]
12-07 20:15:25.796 694 1105 E QC-QMI : linux_qmi_qmux_io_wake_unlock: Err in writing wakelock=qmuxd_port_wl_0, error [1: Operation not permitted]
12-07 20:15:25.797 694 1105 E QC-QMI : linux_qmi_qmux_io_wake_lock: Err in writing wakelock=qmuxd_port_wl_0, error [1: Operation not permitted]
12-07 20:15:25.797 694 1105 E QC-QMI : linux_qmi_qmux_io_wake_unlock: Err in writing wakelock=qmuxd_port_wl_0, error [1: Operation not permitted]
12-07 20:15:25.800 694 1105 E QC-QMI : linux_qmi_qmux_io_wake_lock: Err in writing wakelock=qmuxd_port_wl_0, error [1: Operation not permitted]
12-07 20:15:25.800 694 1105 E QC-QMI : linux_qmi_qmux_io_wake_unlock: Err in writing wakelock=qmuxd_port_wl_0, error [1: Operation not permitted]

Nokia 5 - Android 7.1.2 no video image only sound

I have a nokia 5, after the upgrade of android version to 7.1.2 some apps stops to show video image , I just can hear the sound.
I found this on logcat
Code:
10-31 13:35:58.874 513 513 E SurfaceFlinger: CaptureScreen: layer name = pt.nowo.nowotv/androme.be.nebula.ui.boot.SplashScreen
10-31 13:35:58.913 2840 2840 E PBSessionCacheImpl: sessionId[12491961548232875] not persisted.
10-31 13:36:01.791 1506 1883 E WifiHAL : Received fatal event, sending alert
10-31 13:36:01.792 1506 1837 E WifiHAL : wifi_get_ring_data: Error -22 happened.
10-31 13:36:01.793 1506 1837 E WifiHAL : wifi_get_ring_data: Error -22 happened.
10-31 13:36:01.793 1506 1837 E WifiHAL : wifi_get_ring_data: Error -22 happened.
10-31 13:36:01.794 1506 1837 E WifiHAL : wifi_get_ring_data: Error -22 happened.
10-31 13:36:01.794 1506 1837 E WifiHAL : wifi_get_ring_data: Error -22 happened.
10-31 13:36:09.324 703 941 E QSEECOMAPI: Error::Cannot open the file /vendor/firmware/widevine.mdt errno = 2
10-31 13:36:09.324 703 941 E QSEECOMAPI: Error::Loading image failed with ret = -1
10-31 13:36:09.356 703 941 E DrmWidevineDash: sion_buffer g_wv_fhandle->ion_sbuffer 0x0xe8579000
10-31 13:36:09.366 564 566 E rpmb_emmc: ----------------------------rpmb_emmc_read-----------------------------
10-31 13:36:09.372 564 572 E QC-time-services: Receive Passed == base = 13, unit = 1, operation = 2, result = 0
10-31 13:36:09.372 686 734 E QC-time-services: Daemon: Time-services: Waiting to acceptconnection
10-31 13:36:09.373 686 734 E QC-time-services: Daemon: Time-services: Waiting to acceptconnection
10-31 13:36:09.400 703 703 E DrmWidevineDash: tz api security patch level = 0
10-31 13:36:09.782 702 702 E : Service not available yet
10-31 13:36:09.797 431 2516 E ANDR-PERF-MPCTL: Invalid profile no. 0, total profiles 0 only
10-31 13:36:09.952 702 943 E OMX-VDEC-1080P: Extension: OMX.google.android.index.storeANWBufferInMetadata not implemented
10-31 13:36:09.959 702 943 E OMX-VDEC-1080P: Extension: OMX.google.android.index.storeANWBufferInMetadata not implemented
10-31 13:36:09.959 702 943 E OMX-VDEC-1080P: Extension: OMX.google.android.index.configureVideoTunnelMode not implemented
10-31 13:36:09.959 702 943 E OMX-VDEC-1080P: Extension: OMX.google.android.index.useAndroidNativeBuffer is supported
10-31 13:36:09.963 702 943 E OMX-VDEC-1080P: Does not handle dataspace request
10-31 13:36:09.963 702 943 E OMXNodeInstance: getConfig(2be0037:qcom.decoder.avc.secure, ??(0x7f000062)) ERROR: UnsupportedSetting(0x80001019)
10-31 13:36:10.396 702 702 E OMX-VDEC-1080P: Does not handle dataspace request
10-31 13:36:10.396 702 702 E OMXNodeInstance: getConfig(2be0037:qcom.decoder.avc.secure, ??(0x7f000062)) ERROR: UnsupportedSetting(0x80001019)
10-31 13:36:10.494 702 2051 E OMX-VDEC-1080P: Does not handle dataspace request
10-31 13:36:10.494 702 2051 E OMXNodeInstance: getConfig(2be0037:qcom.decoder.avc.secure, ??(0x7f000062)) ERROR: UnsupportedSetting(0x80001019)
10-31 13:36:10.634 697 7482 E msm8916_platform: platform_check_backends_match: Invalid snd_device2 =
10-31 13:36:10.651 697 7482 E audio_hw_dolby: audio_extn_dolby_ds2_set_endpoint: Dolby set endpint :0x2
10-31 13:36:13.647 513 513 E SurfaceFlinger: CaptureScreen: layer name = pt.nowo.nowotv/androme.be.nebula.ui.MainActivity
Also, on this android version I need to turn on/off the mobile data manually every time that I send / receive a MMS, is there any way to turn on mobile data automatically any time that I send / receive a MMS like other Android versions do?
Any one can help me to understand the issue and hopefully help me to fix it. Best regards

lineage 14.1 "media server died, closing camera"

I'm apparently the only person having this issue on their v20, and no one seems to have a fix anywhere in general. the camera self terminates on Startup with the message "media server died, closing camera" and of course is unusable. the closest thing I found to a fix was mid last year a thread on it with a supposed fix and a dead link and Googling it brings up a handful of results for other phones but the only advice being "submit a bug report", again from almost 12 months ago. does anyone know how to fix this? and yes, it is a brand new fresh install.
edit: i went ahead and made sure the install was 100% fresh completely unaltered in any way, i installed the 2/13 nightly and nothing else, no root enable no gapps no nothing but still the camera gives me the same error. i tried to go to a stock rom and it doesnt work either, it just says that the camera failed or something. here is a logcat of trying to open the default cyanogenmod camera supplied by lineage:
Code:
02-24 12:02:38.337 7768 7790 E WVMExtractor: Failed to open libwvm.so: dlopen failed: library "libwvm.so" not found
02-24 12:02:38.597 561 733 E ANDR-PERF-OPTSHANDLER: Sched boost lock is already acquired, concurrency is not supported for this resource
02-24 12:02:38.597 561 733 E ANDR-PERF-RESOURCEQS: Failed to apply optimization [4, 3, 0]
02-24 12:02:38.618 590 7813 E : [LG_cam_debug][mm-camera] module_sensor_init_session:1288: set log level 0
02-24 12:02:38.622 590 7817 E mm-camera: <STATS_AF ><ERROR> 140: af_fdprio_init: Elsa Device(mm-camera)
02-24 12:02:38.631 590 7817 E mm-3a-core: start_accel_sensor: sensor1_open E
02-24 12:02:38.632 590 7817 E mm-3a-core: start_accel_sensor: sensor1_open X, res = 0
02-24 12:02:38.637 590 590 E mm-camera: <SENSOR><ERROR> 7493: module_sensor_get_session_data: module_sensor_get_session_data lg_ae 0 sensor_name hi553
02-24 12:02:38.637 590 590 E mm-camera: <SENSOR><ERROR> 7519: module_sensor_get_session_data: module_sensor_get_session_data lg_awb 0 sensor_name hi553
02-24 12:02:38.637 590 590 E mm-camera: <STATS_AEC ><ERROR> 278: aec_port_load_function: aec_port_load_function lg_aec 0
02-24 12:02:38.648 590 590 E mm-3a-core: af_lg_load_tuning_param(49) sensor_name =
02-24 12:02:38.649 590 590 E mm-3a-core: [ACCEL_SENSOR_USE_AF_DEBUG] af_core_initialize_internal_data: accel [#not#] enable
02-24 12:02:38.655 567 1269 E QCamera : <MCI><ERROR> mm_camera_open: 313: mm_camera_open: opened, break out while loop
02-24 12:02:38.700 567 5019 E Camera2-Metadata: Mismatched tag type when updating entry enable (-2146893824) of type byte; got type int32 data instead
02-24 12:02:38.700 567 5019 E Camera2-Metadata: Mismatched tag type when updating entry is_main (-2146893823) of type byte; got type int32 data instead
02-24 12:02:38.700 567 5019 E Camera2-Metadata: Mismatched tag type when updating entry enable (-2146893824) of type byte; got type int32 data instead
02-24 12:02:38.700 567 5019 E Camera2-Metadata: Mismatched tag type when updating entry is_main (-2146893823) of type byte; got type int32 data instead
02-24 12:02:38.707 7768 7794 E CAM_PhotoModule: Invalid preview resolution:
02-24 12:02:38.713 7768 7794 E CAM_PhotoModule: advancedFeature value =none
02-24 12:02:38.728 561 733 E ANDR-PERF-OPTSHANDLER: Sched boost lock is already acquired, concurrency is not supported for this resource
02-24 12:02:38.728 561 733 E ANDR-PERF-RESOURCEQS: Failed to apply optimization [4, 3, 0]
02-24 12:02:38.728 567 5018 E QCamera : <MCI><ERROR> mm_channel_fsm_fn_stopped: 895: invalid state (1) for evt (6)
02-24 12:02:38.774 567 5018 E mm-still: virtual OMX_ERRORTYPE QOMXImageCodec::omx_component_set_callbacks(OMX_HANDLETYPE, OMX_CALLBACKTYPE *, OMX_PTR): Bad Parameter
02-24 12:02:38.790 561 733 E ANDR-PERF-OPTSHANDLER: Sched boost lock is already acquired, concurrency is not supported for this resource
02-24 12:02:38.790 561 733 E ANDR-PERF-RESOURCEQS: Failed to apply optimization [4, 3, 0]
02-24 12:02:38.791 590 7838 E mm-camera: <SENSOR><ERROR> 1763: sensor_set_frame_rate: max fps 30.000000 min fps 1.000000,fixed_frame_rate=0
02-24 12:02:38.792 590 7838 E mm-camera: <IFACE ><ERROR> 5505: iface_util_set_dis_enable_flag: iface_util_set_dis_enable_flag:5505 DIS enable flag = 0
02-24 12:02:38.792 590 7838 E mm-camera: <SENSOR><ERROR> 818: sensor_pick_resolution: sensor name = hi553, res_idx: 0
02-24 12:02:38.792 590 7838 E mm-camera: <SENSOR><ERROR> 4527: sensor_get_output_info: [CHECK] sensor_get_output_info: sensor_util_get_fourcc_format called (is_flipped: 0)
02-24 12:02:38.797 590 7838 E mm-camera: <ISP ><ERROR> 6095: isp_util_map_streams_to_hw_hal3: INFO: priority stream: 0 num: 1 mask: 0x800
02-24 12:02:38.801 590 7838 E mm-camera: <IFACE ><ERROR> 2755: iface_util_modify_plane_info_for_native_buf: iface_util_modify_plane_info_for_native_buf: Invalid cam_format 0
02-24 12:02:38.801 590 7838 E mm-camera: <IFACE ><ERROR> 2790: iface_util_calculate_frame_length_for_native_buf: iface_util_calculate_frame_length_for_native_buf: returned fail=-1
02-24 12:02:38.801 590 7838 E mm-camera: <IFACE ><ERROR> 2755: iface_util_modify_plane_info_for_native_buf: iface_util_modify_plane_info_for_native_buf: Invalid cam_format 0
02-24 12:02:38.801 590 7838 E mm-camera: <IFACE ><ERROR> 2790: iface_util_calculate_frame_length_for_native_buf: iface_util_calculate_frame_length_for_native_buf: returned fail=-1
02-24 12:02:38.802 590 7838 E mm-camera: <IFACE ><ERROR> 2755: iface_util_modify_plane_info_for_native_buf: iface_util_modify_plane_info_for_native_buf: Invalid cam_format 0
02-24 12:02:38.802 590 7838 E mm-camera: <IFACE ><ERROR> 2790: iface_util_calculate_frame_length_for_native_buf: iface_util_calculate_frame_length_for_native_buf: returned fail=-1
02-24 12:02:38.804 590 7838 E mm-camera: <SENSOR><ERROR> 818: sensor_pick_resolution: sensor name = hi553, res_idx: 0
02-24 12:02:38.863 590 7838 E mm-camera: <SENSOR><ERROR> 818: sensor_pick_resolution: sensor name = hi553, res_idx: 0
02-24 12:02:38.863 590 7838 E mm-camera: <SENSOR><ERROR> 3936: module_sensor_config_choose_aeawb_algo: module_sensor_config_choose_aeawb_algo !!! mode 1 res 0 is_zzhdr 0
02-24 12:02:38.864 590 7838 E mm-camera: <MCT ><ERROR> 935: mct_module_get_module_by_module: found!!! name stats input name stats
02-24 12:02:38.869 590 7833 E mm-camera: <ERROR> 798: aec_set_parse_chromatix: aec_set_parse_chromatix: sensor flag 7
02-24 12:02:38.869 590 7833 E mm-camera: <STATS_AEC ><ERROR> 671: aec_set_parse_generic_tuning: aec_set_parse_generic_tuning: exp_index = 250, prev_exp_index_for_zoom = 250, ZOOM_param = 0
02-24 12:02:38.869 590 7833 E mm-camera: <STATS_AEC ><ERROR> 696: aec_set_parse_generic_tuning: aec_set_parse_generic_tuning: zz_hdr_flag = 0, exp_index_lg_ae = 0, exp_index = 250
02-24 12:02:38.875 7768 7768 E CAM_PhotoModule: loadCameraPreferences() updating camera_id pref
02-24 12:02:38.877 590 7838 E mm-camera: <IFACE ><ERROR> 3107: iface_util_decide_zsl_mode: iface_util_decide_zsl_mode: E
02-24 12:02:38.888 590 7838 E mm-camera: <ISP ><ERROR> 207: load_default_tables: Error: Chromatix ltm normal and backlit both are not enabled
02-24 12:02:38.889 7768 7768 E CAM_PhotoModule: Invalid preview resolution:
02-24 12:02:38.889 7768 7768 E CAM_PhotoModule: advancedFeature value =none
02-24 12:02:38.905 590 7838 E mm-camera: <SENSOR><ERROR> 1901: sensor_set_start_stream: [CHECK] sensor_set_start_stream: is_flipped: 0
02-24 12:02:38.905 590 7838 E mm-camera: <SENSOR><ERROR> 1921: sensor_set_start_stream: set preview tune for LGE Camera app, isVT = 0
02-24 12:02:38.907 590 7838 E mm-camera: <SENSOR><ERROR> 1763: sensor_set_frame_rate: max fps 30.000000 min fps 1.000000,fixed_frame_rate=0
02-24 12:02:38.944 561 733 E ANDR-PERF-RESOURCEQS: Failed to reset optimization [2, 1]
02-24 12:02:38.944 561 733 E ANDR-PERF-RESOURCEQS: Failed to reset optimization [2, 1]
02-24 12:02:38.953 561 733 E ANDR-PERF-OPTSHANDLER: Sched boost lock is already acquired, concurrency is not supported for this resource
02-24 12:02:38.953 561 733 E ANDR-PERF-RESOURCEQS: Failed to apply optimization [4, 3, 0]
02-24 12:02:39.714 575 7884 E FFmpegExtractor: mFormatCtx->pb->error: -1414092869
02-24 12:02:40.664 572 5136 E OMX-VDEC-1080P: Extension: OMX.google.android.index.storeANWBufferInMetadata not implemented
02-24 12:02:40.664 572 5136 E OMX-VDEC-1080P: Extension: OMX.google.android.index.configureVideoTunnelMode not implemented
02-24 12:02:40.664 572 5136 E OMX-VDEC-1080P: Extension: OMX.google.android.index.useAndroidNativeBuffer is supported
02-24 12:02:40.669 572 1770 E OMXNodeInstance: getParameter(23c0062:qcom.decoder.avc, ??(0x7f000044)) ERROR: UnsupportedSetting(0x80001019)
02-24 12:02:40.671 572 5156 E OMXNodeInstance: getParameter(23c0062:qcom.decoder.avc, ??(0x7f000044)) ERROR: UnsupportedSetting(0x80001019)
02-24 12:02:40.682 572 1770 E OMX-VDEC-1080P: ERROR: IP Requirements(#4: 7077888) Requested(#1: 7077888)
02-24 12:02:40.682 572 1770 E OMX-VDEC-1080P: set_parameter: Error: 0x80001005, setting param 0x2000001
02-24 12:02:40.682 572 1770 E OMXNodeInstance: setParameter(23c0062:qcom.decoder.avc, ParamPortDefinition(0x2000001)) ERROR: BadParameter(0x80001005)
02-24 12:02:40.697 572 5136 E C2DColorConvert: unknown format passed for luma alignment number
02-24 12:02:40.697 572 5136 E C2DColorConvert: unknown format passed for luma alignment number
02-24 12:02:40.698 572 1630 E C2DColorConvert: unknown format passed for luma alignment number
02-24 12:02:40.698 572 1630 E OMX-VDEC-1080P: OP Requirements: Client count(1) insufficient v/s requested(18)
02-24 12:02:40.698 572 1630 E OMX-VDEC-1080P: ERROR: OP Requirements(#18: 118784) Requested(#1: 118784)
02-24 12:02:40.698 572 1630 E OMX-VDEC-1080P: set_parameter: Error: 0x80001005, setting param 0x2000001
02-24 12:02:40.698 572 1630 E OMXNodeInstance: setParameter(23c0062:qcom.decoder.avc, ParamPortDefinition(0x2000001)) ERROR: BadParameter(0x80001005)
02-24 12:02:40.713 572 572 E C2DColorConvert: unknown format passed for luma alignment number
02-24 12:02:40.714 572 1026 E C2DColorConvert: unknown format passed for luma alignment number
02-24 12:02:40.715 572 1770 E C2DColorConvert: unknown format passed for luma alignment number
02-24 12:02:40.719 572 5136 E C2DColorConvert: unknown format passed for luma alignment number
02-24 12:02:40.720 572 1026 E OMXNodeInstance: getParameter(23c0062:qcom.decoder.avc, ??(0x7f000044)) ERROR: UnsupportedSetting(0x80001019)
02-24 12:02:40.733 572 1630 E C2DColorConvert: unknown format passed for luma alignment number
02-24 12:02:40.856 572 572 E C2DColorConvert: unknown format passed for luma alignment number
02-24 12:02:40.857 572 1630 E OMXNodeInstance: getParameter(23c0062:qcom.decoder.avc, ??(0x7f000044)) ERROR: UnsupportedSetting(0x80001019)
02-24 12:02:40.905 572 5156 E C2DColorConvert: unknown format passed for luma alignment number
02-24 12:02:40.905 572 5156 E C2DColorConvert: unknown format passed for luma alignment number
02-24 12:02:40.953 561 733 E ANDR-PERF-RESOURCEQS: Failed to reset optimization [2, 1]
02-24 12:02:40.954 561 733 E ANDR-PERF-RESOURCEQS: Failed to reset optimization [2, 1]
02-24 12:02:40.971 572 7891 E C2DColorConvert: unknown format passed for luma alignment number
02-24 12:02:40.971 572 1026 E C2DColorConvert: unknown format passed for luma alignment number
02-24 12:02:40.972 572 572 E OMXNodeInstance: getParameter(23c0062:qcom.decoder.avc, ??(0x7f000044)) ERROR: UnsupportedSetting(0x80001019)
02-24 12:02:43.982 567 7845 E QCamera : <HAL><ERROR> int qcamera::QCamera3HardwareInterface::processCaptureRequest(camera3_capture_request_t *): 4457: Unblocked on timeout!!!!
02-24 12:02:43.982 567 7845 E Camera3-Device: Camera 0: threadLoop: RequestThread: Unable to submit capture request 2 to HAL device: No such device (-19)
02-24 12:02:43.983 567 7845 E Camera2Client: notifyError: Error condition 1 reported by HAL, requestId -1
02-24 12:02:44.006 7768 7795 E Camera : Error 100
02-24 12:02:44.006 7768 7795 E CameraErrorCallback: Got camera error callback. error=100
02-24 12:02:44.359 567 567 E Camera3-Device: Camera 0: clearStreamingRequest: Device has encountered a serious error
02-24 12:02:44.359 567 567 E Camera2-StreamingProcessor: stopStream: Camera 0: Can't clear stream request: Function not implemented (-38)
02-24 12:02:44.359 567 567 E Camera2Client: stopPreviewL: Camera 0: Can't stop streaming: Function not implemented (-38)
02-24 12:02:44.367 590 7838 E mm-camera: <ISP ><ERROR> 1055: isp_handler_control_streamoff: stream_off 2 2 ide 20006
02-24 12:02:44.367 590 7838 E mm-camera: <ISP ><ERROR> 1055: isp_handler_control_streamoff: stream_off 2 2 ide 20006
02-24 12:02:44.367 590 7838 E mm-camera: <ISP ><ERROR> 1055: isp_handler_control_streamoff: stream_off 2 2 ide 20006
02-24 12:02:44.369 590 7838 E mm-camera: <ISP ><ERROR> 1055: isp_handler_control_streamoff: stream_off 2 2 ide 20006
02-24 12:02:44.370 590 7838 E mm-camera: <ISP ><ERROR> 1055: isp_handler_control_streamoff: stream_off 2 2 ide 20006
02-24 12:02:44.373 590 7816 E mm-camera: <IFACE ><ERROR> 10313: iface_util_update_streamon_id: iface_util_update_streamon_id: left stream on count 1, skip hw streamoff
02-24 12:02:44.373 590 7816 E mm-camera: <IFACE ><ERROR> 10313: iface_util_update_streamon_id: iface_util_update_streamon_id: left stream on count 1, skip hw streamoff
02-24 12:02:44.387 590 7872 E mm-camera: <IFACE ><ERROR> 759: iface_axi_stream_set_skip_pattern_all_stream: iface_axi_stream_set_skip_pattern_all_stream: no stream to update skip pattern!
02-24 12:02:44.396 590 7872 E mm-camera: <IFACE ><ERROR> 759: iface_axi_stream_set_skip_pattern_all_stream: iface_axi_stream_set_skip_pattern_all_stream: no stream to update skip pattern!
02-24 12:02:44.405 590 7838 E mm-camera: <SENSOR><ERROR> 1763: sensor_set_frame_rate: max fps 30.000000 min fps 1.000000,fixed_frame_rate=0
02-24 12:02:44.407 590 7838 E mm-camera: <SENSOR><ERROR> 1763: sensor_set_frame_rate: max fps 30.000000 min fps 1.000000,fixed_frame_rate=0
02-24 12:02:44.449 590 7838 E mm-camera: <MCT ><ERROR> 2738: mct_stream_metadata_ctrl_event: Failed to do put_buf during stream off - errno: Invalid argument!!! for buffer info - index: 0, stream id: 1, session id: 2
02-24 12:02:44.528 567 567 E Camera3-Device: Camera 0: notifyError: cannot find in-flight request on frame 2 error
02-24 12:02:44.529 567 567 E Camera3-Device: Camera 0: processCaptureResult: Unknown frame number for capture result: 2
02-24 12:02:44.595 590 7838 E mm-camera: <SENSOR><ERROR> 818: sensor_pick_resolution: sensor name = hi553, res_idx: 0
02-24 12:02:44.595 590 7838 E mm-camera: <SENSOR><ERROR> 3936: module_sensor_config_choose_aeawb_algo: module_sensor_config_choose_aeawb_algo !!! mode 1 res 0 is_zzhdr 0
02-24 12:02:44.595 590 7838 E mm-camera: <MCT ><ERROR> 935: mct_module_get_module_by_module: found!!! name stats input name stats
02-24 12:02:44.615 590 7833 E mm-camera: <ERROR> 798: aec_set_parse_chromatix: aec_set_parse_chromatix: sensor flag 7
02-24 12:02:44.615 590 7833 E mm-camera: <STATS_AEC ><ERROR> 671: aec_set_parse_generic_tuning: aec_set_parse_generic_tuning: exp_index = 250, prev_exp_index_for_zoom = 250, ZOOM_param = 0
02-24 12:02:44.615 590 7833 E mm-camera: <STATS_AEC ><ERROR> 696: aec_set_parse_generic_tuning: aec_set_parse_generic_tuning: zz_hdr_flag = 0, exp_index_lg_ae = 0, exp_index = 250
02-24 12:02:44.633 590 7838 E mm-camera: <IFACE ><ERROR> 3107: iface_util_decide_zsl_mode: iface_util_decide_zsl_mode: E
02-24 12:02:44.649 590 7838 E mm-camera: <ISP ><ERROR> 207: load_default_tables: Error: Chromatix ltm normal and backlit both are not enabled
02-24 12:02:44.662 590 7838 E mm-camera: <SENSOR><ERROR> 1901: sensor_set_start_stream: [CHECK] sensor_set_start_stream: is_flipped: 0
02-24 12:02:44.663 590 7838 E mm-camera: <SENSOR><ERROR> 1921: sensor_set_start_stream: set preview tune for LGE Camera app, isVT = 0
02-24 12:02:44.664 590 7838 E mm-camera: <SENSOR><ERROR> 1763: sensor_set_frame_rate: max fps 30.000000 min fps 1.000000,fixed_frame_rate=0
02-24 12:02:44.781 567 5018 E Camera3-Device: Camera 0: clearStreamingRequest: Device has encountered a serious error
02-24 12:02:44.786 567 5018 E Camera2-StreamingProcessor: stopStream: Camera 0: Can't clear stream request: Function not implemented (-38)
02-24 12:02:44.786 567 5018 E Camera2Client: stopPreviewL: Camera 0: Can't stop streaming: Function not implemented (-38)
02-24 12:02:44.789 590 7838 E mm-camera: <ISP ><ERROR> 1055: isp_handler_control_streamoff: stream_off 2 2 ide 20006
02-24 12:02:44.789 590 7838 E mm-camera: <ISP ><ERROR> 1055: isp_handler_control_streamoff: stream_off 2 2 ide 20006
02-24 12:02:44.789 590 7838 E mm-camera: <ISP ><ERROR> 1055: isp_handler_control_streamoff: stream_off 2 2 ide 20006
02-24 12:02:44.789 590 7838 E mm-camera: <ISP ><ERROR> 1055: isp_handler_control_streamoff: stream_off 2 2 ide 20006
02-24 12:02:44.789 590 7838 E mm-camera: <ISP ><ERROR> 1055: isp_handler_control_streamoff: stream_off 2 2 ide 20006
02-24 12:02:44.790 590 7816 E mm-camera: <IFACE ><ERROR> 10313: iface_util_update_streamon_id: iface_util_update_streamon_id: left stream on count 1, skip hw streamoff
02-24 12:02:44.790 590 7816 E mm-camera: <IFACE ><ERROR> 10313: iface_util_update_streamon_id: iface_util_update_streamon_id: left stream on count 1, skip hw streamoff
02-24 12:02:44.796 590 7911 E mm-camera: <IFACE ><ERROR> 759: iface_axi_stream_set_skip_pattern_all_stream: iface_axi_stream_set_skip_pattern_all_stream: no stream to update skip pattern!
02-24 12:02:44.800 590 7911 E mm-camera: <IFACE ><ERROR> 759: iface_axi_stream_set_skip_pattern_all_stream: iface_axi_stream_set_skip_pattern_all_stream: no stream to update skip pattern!
02-24 12:02:44.884 590 7838 E mm-camera: <SENSOR><ERROR> 818: sensor_pick_resolution: sensor name = hi553, res_idx: 0
02-24 12:02:44.884 590 7838 E mm-camera: <SENSOR><ERROR> 3936: module_sensor_config_choose_aeawb_algo: module_sensor_config_choose_aeawb_algo !!! mode 1 res 0 is_zzhdr 0
02-24 12:02:44.884 590 7838 E mm-camera: <MCT ><ERROR> 935: mct_module_get_module_by_module: found!!! name stats input name stats
02-24 12:02:44.886 590 7833 E mm-camera: <ERROR> 798: aec_set_parse_chromatix: aec_set_parse_chromatix: sensor flag 7
02-24 12:02:44.886 590 7833 E mm-camera: <STATS_AEC ><ERROR> 671: aec_set_parse_generic_tuning: aec_set_parse_generic_tuning: exp_index = 250, prev_exp_index_for_zoom = 250, ZOOM_param = 0
02-24 12:02:44.886 590 7833 E mm-camera: <STATS_AEC ><ERROR> 696: aec_set_parse_generic_tuning: aec_set_parse_generic_tuning: zz_hdr_flag = 0, exp_index_lg_ae = 0, exp_index = 250
02-24 12:02:44.899 590 7838 E mm-camera: <IFACE ><ERROR> 3107: iface_util_decide_zsl_mode: iface_util_decide_zsl_mode: E
02-24 12:02:44.908 590 7838 E mm-camera: <ISP ><ERROR> 207: load_default_tables: Error: Chromatix ltm normal and backlit both are not enabled
02-24 12:02:44.919 590 7838 E mm-camera: <SENSOR><ERROR> 1901: sensor_set_start_stream: [CHECK] sensor_set_start_stream: is_flipped: 0
02-24 12:02:44.919 590 7838 E mm-camera: <SENSOR><ERROR> 1921: sensor_set_start_stream: set preview tune for LGE Camera app, isVT = 0
02-24 12:02:44.921 590 7838 E mm-camera: <SENSOR><ERROR> 1763: sensor_set_frame_rate: max fps 30.000000 min fps 1.000000,fixed_frame_rate=0
02-24 12:02:45.060 567 5018 E Camera3-Device: Camera 0: disconnect: Shutting down in an error state
02-24 12:02:45.066 561 733 E ANDR-PERF-OPTSHANDLER: Sched boost lock is already acquired, concurrency is not supported for this resource
02-24 12:02:45.067 561 733 E ANDR-PERF-RESOURCEQS: Failed to apply optimization [4, 3, 0]
02-24 12:02:45.072 590 7838 E mm-camera: <ISP ><ERROR> 1055: isp_handler_control_streamoff: stream_off 2 2 ide 20006
02-24 12:02:45.072 590 7838 E mm-camera: <ISP ><ERROR> 1055: isp_handler_control_streamoff: stream_off 2 2 ide 20006
02-24 12:02:45.072 590 7838 E mm-camera: <ISP ><ERROR> 1055: isp_handler_control_streamoff: stream_off 2 2 ide 20006
02-24 12:02:45.072 590 7838 E mm-camera: <ISP ><ERROR> 1055: isp_handler_control_streamoff: stream_off 2 2 ide 20006
02-24 12:02:45.073 590 7838 E mm-camera: <ISP ><ERROR> 1055: isp_handler_control_streamoff: stream_off 2 2 ide 20006
02-24 12:02:45.074 590 7816 E mm-camera: <IFACE ><ERROR> 10313: iface_util_update_streamon_id: iface_util_update_streamon_id: left stream on count 1, skip hw streamoff
02-24 12:02:45.074 590 7816 E mm-camera: <IFACE ><ERROR> 10313: iface_util_update_streamon_id: iface_util_update_streamon_id: left stream on count 1, skip hw streamoff
02-24 12:02:45.082 590 7926 E mm-camera: <IFACE ><ERROR> 759: iface_axi_stream_set_skip_pattern_all_stream: iface_axi_stream_set_skip_pattern_all_stream: no stream to update skip pattern!
02-24 12:02:45.087 590 7926 E mm-camera: <IFACE ><ERROR> 759: iface_axi_stream_set_skip_pattern_all_stream: iface_axi_stream_set_skip_pattern_all_stream: no stream to update skip pattern!
02-24 12:02:45.147 590 7838 E mm-camera: <SENSOR><ERROR> 818: sensor_pick_resolution: sensor name = hi553, res_idx: 0
02-24 12:02:45.147 590 7838 E mm-camera: <SENSOR><ERROR> 4527: sensor_get_output_info: [CHECK] sensor_get_output_info: sensor_util_get_fourcc_format called (is_flipped: 0)
02-24 12:02:45.152 567 5018 E QCamera3HWI: int qcamera::QCamera3HardwareInterface::closeCamera(): mCameraSessionActiveCount = 1
02-24 12:02:45.155 590 590 E mm-camera: <ISP ><ERROR> 906: isp_port_check_caps_unreserve: ISP session resource not dellocated in time
02-24 12:02:45.161 590 7936 E mm-camera: <ISP ><ERROR> 556: isp_module_stop_session: warning: ISP resource is not freed on time!
02-24 12:02:45.170 590 7937 E mm-camera: <STATS_AEC ><ERROR> 310: aec_port_unload_function: aec_port_unload_function cur_lg_aec 0
02-24 12:03:01.664 1386 2751 E LocSvc_libulp: I/int ulp_msg_process_system_update(const UlpSystemEvent): systemEvent:5
02-24 12:03:01.665 1386 2751 E LocSvc_libulp: I/===> int ulp_brain_turn_onoff_dr_provider() line 848
02-24 12:03:01.665 1386 2751 E LocSvc_libulp: I/===> int ulp_dr_stop_engine() line 235
02-24 12:03:01.665 1386 2751 E LocSvc_libulp: I/int ulp_msg_process_start_req(), at ulp state = 1
02-24 12:03:01.665 1386 1752 E LocSvc_api_v02: I/---> locClientSendReq line 2069 QMI_LOC_GET_BEST_AVAILABLE_POSITION_REQ_V02
02-24 12:03:01.670 1386 1761 E LocSvc_ApiV02: I/<--- void globalRespCb(locClientHandleType, uint32_t, const locClientRespIndUnionType, uint32_t, void *) line 140 QMI_LOC_GET_BEST_AVAILABLE_POSITION_REQ_V02
02-24 12:03:01.670 1386 2751 E LocSvc_libulp: I/int ulp_brain_process_zpp_position_report(const enum loc_sess_status, LocPosTechMask, UlpLocation *), report ZPP position to providers,report_position = 1
02-24 12:03:01.671 1386 2751 E LocSvc_libulp: I/===> int ulp_brain_turn_onoff_dr_provider() line 848
02-24 12:03:01.671 1386 2751 E LocSvc_libulp: I/===> int ulp_dr_stop_engine() line 235
02-24 12:04:01.665 1386 2751 E LocSvc_libulp: I/int ulp_msg_process_system_update(const UlpSystemEvent): systemEvent:5
02-24 12:04:01.665 1386 2751 E LocSvc_libulp: I/===> int ulp_brain_turn_onoff_dr_provider() line 848
02-24 12:04:01.665 1386 2751 E LocSvc_libulp: I/===> int ulp_dr_stop_engine() line 235
02-24 12:04:01.665 1386 2751 E LocSvc_libulp: I/int ulp_msg_process_start_req(), at ulp state = 1
02-24 12:04:01.665 1386 1752 E LocSvc_api_v02: I/---> locClientSendReq line 2069 QMI_LOC_GET_BEST_AVAILABLE_POSITION_REQ_V02
02-24 12:04:01.670 1386 1761 E LocSvc_ApiV02: I/<--- void globalRespCb(locClientHandleType, uint32_t, const locClientRespIndUnionType, uint32_t, void *) line 140 QMI_LOC_GET_BEST_AVAILABLE_POSITION_REQ_V02
02-24 12:04:01.671 1386 2751 E LocSvc_libulp: I/int ulp_brain_process_zpp_position_report(const enum loc_sess_status, LocPosTechMask, UlpLocation *), report ZPP position to providers,report_position = 1
02-24 12:04:01.671 1386 2751 E LocSvc_libulp: I/===> int ulp_brain_turn_onoff_dr_provider() line 848
02-24 12:04:01.671 1386 2751 E LocSvc_libulp: I/===> int ulp_dr_stop_engine() line 235
same her with HTC M8

Whatsapp can't record voice notes

EDIT: FIXED! Turns out I had the magisk module "Oneplus 6 stereo speaker mod" installed (not sure why I didn't have the 6t version, maybe that's part of the reason), after uninstalling that everything started working again.
Hey everyone,
so after updating to OOS10 I can't record voice messages in whatsapp anymore. Every other app works fine, even whatsapp calls work, just voice notes are broken.
I know there are a few similar threads but the only proposed solution there is to use WhatsApp Business, which I don't want to.
I've looked at the logcat while trying to record a message and there's a few error messages thrown by various audio drivers
Code:
01-04 20:34:42.610 824 29193 E soundtrigger: audio_extn_sound_trigger_update_stream_status: invalid input device 0x0, for event 3
01-04 20:34:42.612 824 29193 E ACDB-LOADER: Error: ACDB_CMD_GET_AFE_COMMON_TABLE_SIZE Returned = -19
01-04 20:34:42.612 824 29193 E ACDB-LOADER: Error: ACDB AFE returned = -19
01-04 20:34:42.699 824 29193 E msm8974_platform: platform_set_channel_map: Could not set ctl, error:-22 ch_count:2
01-04 20:34:42.793 961 1026 E SurfaceFlinger: screenshot by : /system/bin/surfaceflinger
01-04 20:34:43.024 961 1026 E SurfaceFlinger: screenshot by : /system/bin/surfaceflinger
01-04 20:34:43.134 824 11979 E audio_route: unable to find path 'speaker-dmic-endfire-whatsapp'
01-04 20:34:43.137 824 11979 E ACDB-LOADER: Error: ACDB AudProc vol returned = -19
01-04 20:34:43.137 824 11979 E ACDB-LOADER: Error: ACDB_CMD_GET_AFE_COMMON_TABLE_SIZE Returned = -19
01-04 20:34:43.137 824 11979 E ACDB-LOADER: Error: ACDB AFE returned = -19
01-04 20:34:43.140 961 1026 E SurfaceFlinger: screenshot by : /system/bin/surfaceflinger
01-04 20:34:43.146 824 11979 E audio_hw_primary: start_input_stream: cannot set hw params: Invalid argument
01-04 20:34:43.148 824 11979 E audio_route: unable to find path 'speaker-dmic-endfire-whatsapp'
01-04 20:34:43.222 824 11979 E audio_route: unable to find path 'speaker-dmic-endfire-whatsapp'
01-04 20:34:43.225 824 11979 E ACDB-LOADER: Error: ACDB AudProc vol returned = -19
01-04 20:34:43.226 824 11979 E ACDB-LOADER: Error: ACDB_CMD_GET_AFE_COMMON_TABLE_SIZE Returned = -19
01-04 20:34:43.226 824 11979 E ACDB-LOADER: Error: ACDB AFE returned = -19
01-04 20:34:43.233 824 11979 E audio_hw_primary: start_input_stream: cannot set hw params: Invalid argument
01-04 20:34:43.236 824 11979 E audio_route: unable to find path 'speaker-dmic-endfire-whatsapp'
01-04 20:34:43.242 961 1026 E SurfaceFlinger: screenshot by : /system/bin/surfaceflinger
01-04 20:34:43.311 824 11979 E audio_route: unable to find path 'speaker-dmic-endfire-whatsapp'
01-04 20:34:43.313 824 11979 E ACDB-LOADER: Error: ACDB AudProc vol returned = -19
These messages keep looping while trying to record the message, showing the the code just tries to connect to the mic in the background indefinitely but always fails.
Anyone have any idea what to do here? I've reinstalled Whatsapp already to no avail, rebooting didn't help either.

FireTV 4K and WiFi FDS Channels

Hi Guys, I live in an apartment building and the non-dfs channels are pretty congested. I have been using DFS channels for a long time (64 or 100). Lately, my fireTV4K has started to behave weird. It connects to the wifi, but, after some minutes, it drops the wifi, and crashes. Only way to get it back is pulling power.
From logcat, i can see that it is related to DFS and P2P wifi. I am running the lastest version of ForeOS. I have also tried to root and debloat all amazon apps, but the issue is still happening.
Here is the logcat when it crashes:
Code:
08-24 23:08:48.411 605 658 D AmazonWifiP2pServiceImpl: CREATE_GROUP
08-24 23:08:48.411 605 658 I AmazonWifiP2pServiceImpl: found saved GO, netId=0
08-24 23:08:48.412 605 658 I AmazonWifiP2pServiceImpl: ethernetConnected = false
08-24 23:08:48.412 605 658 I AmazonWifiP2pServiceImpl: Create GO group use the saved p2p property = 5320
08-24 23:08:48.413 878 878 I wpa_supplicant: P2P: The forced channel for GO (5320 MHz) is not supported for P2P uses
08-24 23:08:48.414 605 658 I AmazonWifiP2pServiceImpl: Create GO group use the default chnl =5180
08-24 23:08:48.416 878 878 I wpa_supplicant: P2P: init GO, use existing freq 5500
08-24 23:08:48.416 878 878 E wpa_supplicant: Failed to create interface p2p-p2p0-12: -12 (Out of memory)
08-24 23:08:48.416 878 878 E wpa_supplicant: P2P: Failed to create new group interface: err=1 (Operation not permitted)
08-24 23:08:48.416 878 878 E wpa_supplicant: P2P: Failed to add group interface
08-24 23:08:48.417 605 658 E WifiP2pService: InactiveStateCREATE_GROUP failed
08-24 23:08:48.417 605 658 I WifiP2pService: InactiveState CREATE_GROUP failed cnt=11
08-24 23:08:48.417 605 658 I WifiP2pService: InactiveState Sending DRIVER_HUNG_EVENT to WifiStateMachine
08-24 23:08:48.419 605 660 I WifiStateMachine: WifiMonitor.DRIVER_HUNG_EVENT
08-24 23:08:48.422 605 660 D WifiNative-HAL: stopRssiMonitoring, cmdId 0
08-24 23:08:48.423 605 661 D DhcpClient: doQuit
Anyone has any clue?

Categories

Resources