Related
*Now Working for 4.3 Update* Will require an up-to-date install of 4.1.x first and then after re-boot, it will update to 4.3 (read post on next page).
Warning:
Because of of how weird step 7 was, I'd recommend NOT INSTALLING THE OTA and just waiting for a ROM to have the changes incorporated. This is the last time I'll install an OTA I think as the whole thing was sketchy at best. However, if you just insist doing the OTA, that's how I did it. It may not work for you. You'll probably brick your phone as I may have just gotten lucky.
Background:
I'm certainly not a developer but can wiggle my way around XDA and figure out what to do and how to do it from time to time without having to ask too many questions. This morning I got the notification that an OTA (over the air) Update was available for my HTC One Dev Edition (running the stock ROM) and I simply downloaded it and tried to flash the zip in Clockwork like I've done with countless other updated nightlies on various phones. It didn't work.
Solution:
I figured out after researching that the custom recovery wouldn't allow the OTA to be flashed and that the stock recovery would be needed to flash the OTA update. I also realized that it took a bunch of different threads to figure out how to make it all work and there didn't seem to be one thread on the HTC One forum that discussed how to do it so I figured I may as well write up what I did to help someone else--after all, so many folks have helped me on this forum and I've rarely had much to contribute of any real depth anyway--just repeating what others already had taught me.
How to:
You need to re-flash the original recovery to your phone so that CWM or TWRP are no longer your recovery. Obviously, now is the time to do a backup and I'd put it somewhere other than on the phone in case you really mess this up.
1. Get the stock recovery bits here https://www.dropbox.com/s/9wbux6a4kn0ndz9/StockRecovery-signed.zip
2. You'll need to un-pack the rar and there is a text file that has the instructions.
3. Of course, I didn't follow the instructions, I just plugged my phone into USB with debugging on and fired up cmd, changed into the directory where I extracted the files, cd'd into fastboot and typed "adb reboot bootloader" and waited until the phone rebooted into bootloader
4. I typed "fastboot devices" and hit enter to make sure I was connected to the phone still
5. Cd.. to get back to where the .bat files are and type install-recovery-windows.bat and the stock recovery is flashed to your HTC One.
6. Now unplug the thing and reboot and you'll get the notification again that the OTA update is ready to install and it will start to install.
7. Mine locked up. That's right, the damn OTA update stopped at about 1/4 of the way through. I figured I bricked the phone. I always figure I bricked it if something doesn't go exactly how I thought it would but I've never actually done it to any of my 6 or so devices. Then I found this thread: http://forum.xda-developers.com/showthread.php?t=2306996&page=2 and I turned off the phone by holding down the power and restarting it. It got all the way through and hung again so I reset the phone again. Then, it rebooted a few times and looked like it was going to never work right again, but I just let it keep rebooting and left it be and after a few minutes, less than 10, probably more than 5, I was back up and running and saw the android applications updating as expected after an update.
8. Now you'll want to re-flash your custom rom (TWRP, CWM) and I did that with Hasoon's All-in-one tool.
9. Re-get Root. You can do that with Hasoon's tool I suppose or however you prefer to root.
AGAIN:
Because of of how weird step 7 was, I'd recommend NOT INSTALLING THE OTA and just waiting for a ROM to have the changes incorporated. This is the last time I'll install an OTA I think as the whole thing was sketchy at best. However, if you just insist doing the OTA, that's how I did it. It may not work for you. You'll probably brick your phone as I may have just gotten lucky.
Hopefully someone will come up with a better way to do this and start a new thread and we can delete this one forever.
jay_ntwr said:
Warning:
Because of of how weird step 7 was, I'd recommend NOT INSTALLING THE OTA and just waiting for a ROM to have the changes incorporated. This is the last time I'll install an OTA I think as the whole thing was sketchy at best. However, if you just insist doing the OTA, that's how I did it. It may not work for you. You'll probably brick your phone as I may have just gotten lucky.
Background:
I'm certainly not a developer but can wiggle my way around XDA and figure out what to do and how to do it from time to time without having to ask too many questions. This morning I got the notification that an OTA (over the air) Update was available for my HTC One Dev Edition (running the stock ROM) and I simply downloaded it and tried to flash the zip in Clockwork like I've done with countless other updated nightlies on various phones. It didn't work.
Solution:
I figured out after researching that the custom recovery wouldn't allow the OTA to be flashed and that the stock recovery would be needed to flash the OTA update. I also realized that it took a bunch of different threads to figure out how to make it all work and there didn't seem to be one thread on the HTC One forum that discussed how to do it so I figured I may as well write up what I did to help someone else--after all, so many folks have helped me on this forum and I've rarely had much to contribute of any real depth anyway--just repeating what others already had taught me.
How to:
You need to re-flash the original recovery to your phone so that CWM or TWRP are no longer your recovery. Obviously, now is the time to do a backup and I'd put it somewhere other than on the phone in case you really mess this up.
1. Get the stock recovery bits here http://www.androidrevolution.nl/downloader/download.php?file=Flash_recovery_2.17.401.1.rar
2. You'll need to un-pack the rar and there is a text file that has the instructions.
3. Of course, I didn't follow the instructions, I just plugged my phone into USB with debugging on and fired up cmd, changed into the directory where I extracted the files, cd'd into fastboot and typed "adb reboot bootloader" and waited until the phone rebooted into bootloader
4. I typed "fastboot devices" and hit enter to make sure I was connected to the phone still
5. Cd.. to get back to where the .bat files are and type install-recovery-windows.bat and the stock recovery is flashed to your HTC One.
6. Now unplug the thing and reboot and you'll get the notification again that the OTA update is ready to install and it will start to install.
7. Mine locked up. That's right, the damn OTA update stopped at about 1/4 of the way through. I figured I bricked the phone. I always figure I bricked it if something doesn't go exactly how I thought it would but I've never actually done it to any of my 6 or so devices. Then I found this thread: http://forum.xda-developers.com/showthread.php?t=2306996&page=2 and I turned off the phone by holding down the power and restarting it. It got all the way through and hung again so I reset the phone again. Then, it rebooted a few times and looked like it was going to never work right again, but I just let it keep rebooting and left it be and after a few minutes, less than 10, probably more than 5, I was back up and running and saw the android applications updating as expected after an update.
8. Now you'll want to re-flash your custom rom (TWRP, CWM) and I did that with Hasoon's All-in-one tool.
9. Re-get Root. You can do that with Hasoon's tool I suppose or however you prefer to root.
AGAIN:
Because of of how weird step 7 was, I'd recommend NOT INSTALLING THE OTA and just waiting for a ROM to have the changes incorporated. This is the last time I'll install an OTA I think as the whole thing was sketchy at best. However, if you just insist doing the OTA, that's how I did it. It may not work for you. You'll probably brick your phone as I may have just gotten lucky.
Hopefully someone will come up with a better way to do this and start a new thread and we can delete this one forever.
Click to expand...
Click to collapse
I appreciate you writing this up. It seems like I've never been able to find a good solution to installing the OTA updates post-root. That being said, do you have any idea what happened in Step 7 that made it finally work? I just don't understand how doing the same thing over and over finally just worked. I want to try installing an update, but I'm a little nervous to do it. And I don't know how else to make the pesky update notification go away without installing it.
trickinit said:
I appreciate you writing this up. It seems like I've never been able to find a good solution to installing the OTA updates post-root. That being said, do you have any idea what happened in Step 7 that made it finally work? I just don't understand how doing the same thing over and over finally just worked. I want to try installing an update, but I'm a little nervous to do it. And I don't know how else to make the pesky update notification go away without installing it.
Click to expand...
Click to collapse
I really have no idea why Step 7 got so strange. The only thing that gave me a warm fuzzy whatsoever was that others were reporting that it was hanging and they just rebooted the phone over and over until it got all the way through the process. It could have something to do with the stock recovery for all I know--a bug perhaps. Again, it made me nervous and I won't do it again. I only did the write up so folks could see what happens and make a call whether or not they wanted to try it themselves and see the steps all on one page instead of getting stuck like I did and then finding the rest of the steps. That part sucked. At least you'll know what you're getting into though. Good luck one way or the other. Please post up if you do go through with it and what your results are.
Thank you for the info! Does sound like an awful lot of work though
jay_ntwr said:
I really have no idea why Step 7 got so strange. The only thing that gave me a warm fuzzy whatsoever was that others were reporting that it was hanging and they just rebooted the phone over and over until it got all the way through the process. It could have something to do with the stock recovery for all I know--a bug perhaps. Again, it made me nervous and I won't do it again. I only did the write up so folks could see what happens and make a call whether or not they wanted to try it themselves and see the steps all on one page instead of getting stuck like I did and then finding the rest of the steps. That part sucked. At least you'll know what you're getting into though. Good luck one way or the other. Please post up if you do go through with it and what your results are.
Click to expand...
Click to collapse
I'm thinking I'll give it a go. I'll do a nandroid backup and store it on my pc. Worst case scenario, I'll just start over from scratch, re-root, and restore my backup. I'll make sure to report my results.
I just makes me wonder why bother using the OTA update if you already went through rooting and flashing custom recovery? It's just one step more to flash the custom ROM and at least you will get constant updates with the developer who created the custom ROM. To me it seems like you either stay stock if you want OTA updates or go the whole hog and use custom ROMs. Just my 2 cents.
shadowboy23 said:
I just makes me wonder why bother using the OTA update if you already went through rooting and flashing custom recovery?
Click to expand...
Click to collapse
Well, in my case, I purchased the Dev edition straight from HTC so I automatically have a de-bloated OS from HTC instead of the ATT ROM that I would have gotten had I purchased the phone from the ATT Store. In that case, I'd no question have a custom ROM from the forum. I just didn't see the need this time around. I would have left the stock recovery, but I do like to make backups so ClockworkMod is something I can't live without. I suppose there are others in that same boat but they are probably few and far between. Really, I just hate to update my ROM since the phone is working how I want at the moment. It's hard to justify just blowing away a functioning OS, setting up everything again, etc. but I may do it again if the OTAs come frequently and/or the process is as strange as it was this past go around.
jay_ntwr said:
Warning:
Because of of how weird step 7 was, I'd recommend NOT INSTALLING THE OTA and just waiting for a ROM to have the changes incorporated. This is the last time I'll install an OTA I think as the whole thing was sketchy at best. However, if you just insist doing the OTA, that's how I did it. It may not work for you. You'll probably brick your phone as I may have just gotten lucky.
Background:
I'm certainly not a developer but can wiggle my way around XDA and figure out what to do and how to do it from time to time without having to ask too many questions. This morning I got the notification that an OTA (over the air) Update was available for my HTC One Dev Edition (running the stock ROM) and I simply downloaded it and tried to flash the zip in Clockwork like I've done with countless other updated nightlies on various phones. It didn't work.
Solution:
I figured out after researching that the custom recovery wouldn't allow the OTA to be flashed and that the stock recovery would be needed to flash the OTA update. I also realized that it took a bunch of different threads to figure out how to make it all work and there didn't seem to be one thread on the HTC One forum that discussed how to do it so I figured I may as well write up what I did to help someone else--after all, so many folks have helped me on this forum and I've rarely had much to contribute of any real depth anyway--just repeating what others already had taught me.
How to:
You need to re-flash the original recovery to your phone so that CWM or TWRP are no longer your recovery. Obviously, now is the time to do a backup and I'd put it somewhere other than on the phone in case you really mess this up.
1. Get the stock recovery bits here http://www.androidrevolution.nl/downloader/download.php?file=Flash_recovery_2.17.401.1.rar
2. You'll need to un-pack the rar and there is a text file that has the instructions.
3. Of course, I didn't follow the instructions, I just plugged my phone into USB with debugging on and fired up cmd, changed into the directory where I extracted the files, cd'd into fastboot and typed "adb reboot bootloader" and waited until the phone rebooted into bootloader
4. I typed "fastboot devices" and hit enter to make sure I was connected to the phone still
5. Cd.. to get back to where the .bat files are and type install-recovery-windows.bat and the stock recovery is flashed to your HTC One.
6. Now unplug the thing and reboot and you'll get the notification again that the OTA update is ready to install and it will start to install.
7. Mine locked up. That's right, the damn OTA update stopped at about 1/4 of the way through. I figured I bricked the phone. I always figure I bricked it if something doesn't go exactly how I thought it would but I've never actually done it to any of my 6 or so devices. Then I found this thread: http://forum.xda-developers.com/showthread.php?t=2306996&page=2 and I turned off the phone by holding down the power and restarting it. It got all the way through and hung again so I reset the phone again. Then, it rebooted a few times and looked like it was going to never work right again, but I just let it keep rebooting and left it be and after a few minutes, less than 10, probably more than 5, I was back up and running and saw the android applications updating as expected after an update.
8. Now you'll want to re-flash your custom rom (TWRP, CWM) and I did that with Hasoon's All-in-one tool.
9. Re-get Root. You can do that with Hasoon's tool I suppose or however you prefer to root.
AGAIN:
Because of of how weird step 7 was, I'd recommend NOT INSTALLING THE OTA and just waiting for a ROM to have the changes incorporated. This is the last time I'll install an OTA I think as the whole thing was sketchy at best. However, if you just insist doing the OTA, that's how I did it. It may not work for you. You'll probably brick your phone as I may have just gotten lucky.
Hopefully someone will come up with a better way to do this and start a new thread and we can delete this one forever.
Click to expand...
Click to collapse
hi,
one question. this recovery.img i also can use for my htc one 802w? i use the original rom (4.1.2) on my htc one. i make s-off over htcdev.com install cwm802w.img . i become the info the system update to 4.2.2 is available but the phone cant install the update.
any people like help me?
best regards,
ps: sorry for my bad english
Does sound like an awful lot of work though
greengoose_at said:
hi,
one question. this recovery.img i also can use for my htc one 802w? i use the original rom (4.1.2) on my htc one. i make s-off over htcdev.com install cwm802w.img . i become the info the system update to 4.2.2 is available but the phone cant install the update.
any people like help me?
best regards,
ps: sorry for my bad english
Click to expand...
Click to collapse
Just find a stock recovery for 802w, flash it to your phone and you should be fine to to OTA. The original post didn't mention if he's using 802w. If he's not, then the recovery.img can't be used for 802w.
How to get s_off , supercid 11111111
and return to s_on with supercid ?please tell me quickly
Thanks for all friends
Sent from my HTC One using xda premium
Sent from my HTC One using xda premium
I haven't been able to get this to work. I flashed back to the stock recovery, but when I attempt to install the update it gets about half way through before rebooting. It goes back into recovery, starts installing again, but then stops and just shows a red triangle with an exclamation mark. I can get the phone to reboot by holding the power button for 10 seconds, which boots it up normally. When it gets up and running, it's like nothing ever happened, but then the update notification reappears.
trickinit said:
I haven't been able to get this to work. I flashed back to the stock recovery, but when I attempt to install the update it gets about half way through before rebooting. It goes back into recovery, starts installing again, but then stops and just shows a red triangle with an exclamation mark. I can get the phone to reboot by holding the power button for 10 seconds, which boots it up normally. When it gets up and running, it's like nothing ever happened, but then the update notification reappears.
Click to expand...
Click to collapse
I'm experiencing the same thing, can't seem to find anything about it...
With the new 4.3 rolling out on the Dev editions, I decided it was time to try this again. What I found was I had to update to a something prior to the new 4.3. In other words, it was still one of the 1.29 streams that updated first and did just like the last time I did this. The thing stopped, locked up, had to hold the power button down, locked up again, reset again, then it was fine. As soon as the phone booted, the 4.3 update was available and I installed that without any issues. So, the method above still works and even with the weirdness I felt a little better this go around.
Good luck.
sunnyyen said:
Just find a stock recovery for 802w, flash it to your phone and you should be fine to to OTA. The original post didn't mention if he's using 802w. If he's not, then the recovery.img can't be used for 802w.
Click to expand...
Click to collapse
I haven't really checked this thread in weeks. I'm not sure what an 802w is. If you can clarify, I'll check and post.
Totally ran just fine
I had to as stated roll back to the attached recovery, did that with fastboot and no problems, then restarted the phone, then had it start the OTA update, then read around debating if I want CWM or TeamWin, but before I notice, the progress bar got up past half way. Looked away for what must've been less than 5 minutes until it vibrated and was restarting itself. It restarted again, and then it loaded and updated all the apps... Seemed like the smoothest rooted update I've ever done, no forced restarting or anything!
I just bought my HTC One last friday, and I think I screwed up things a little bit, because the first thing I did after I charged it, was updating everything to 4.3, before unlocking the bootloader, getting s-off and before rooting the phone. So I ended up with the latest 4.3 on my phone, but it was a pain in the ass to root it properly. I was able to unlock the bootloader, but something must be different with the way 4.3 treats the internal storage distribution, because I was only able to get root, using TWRP and the latest version of SuperSu, but I wasn´t able to install Busybox.
It's a little bit weird, because although I was able to use Titaniumbackup to install some apps, apps like OTA Rootkeeper don't work properly. I also lost the stock calculator, flashlight and voice recorder, but I was able to install older versions again.
I think the only thing I regret is not getting s-off first, but I think this will only mean that I will have to wait for a revone update, or I will have to flash the boot.img after flashing a custom rom as I always did with my One X.
jay_ntwr said:
I haven't really checked this thread in weeks. I'm not sure what an 802w is. If you can clarify, I'll check and post.
Click to expand...
Click to collapse
802w is Chinese dual sim version with different radio frequency
Sent from my HTC One dual sim using xda app-developers app
deepforest said:
802w is Chinese dual sim version with different radio frequency
Sent from my HTC One dual sim using xda app-developers app
Click to expand...
Click to collapse
That is not the one I have then.
I have a rooted HTC one with stock rom. I relock the bootloader and I also have stock recovery.
I am on 4.19.401.5 version.
So, will it be possible for me to have new OTA update including Sense 6?
Should I install the missing applications also, like calculator and flashlight?
I have rooted many phones before without an issue, and during the root process for this phone, everything was going great, I flashed SuperSU zip in TWRP and rebooted, since it was the first boot I expected a decently long wait, after about 25 minutes I followed the guide's instructions for Verizon since it did say some Verizon users were experiencing long first boot times. I took the battery out like it said, put it back in, then proceeded to fastboot boot2.img, like the guide said. After letting it sit for an hour this time, I got the idea that something was obviously wrong. After multiple attempts with no success I tried to fix it myself. So far I have learned that on the fastboot screen it says my bootloader is locked again, even after unlocking it. I have tried flashing TWRP as a recovery, just to at least have a recovery boot, that does not work either unfortunately. So as of right now, all I have is a v20 that has no OS, a locked bootloader, no way of booting recovery, I can fastboot with no ADB, and its virtually a paperweight. If anyone has a solution to at least get back to Stock, I would greatly appreciate it! Thanks!
First off. It will say: Bootloader Unlocked: No
Thats normal. 2nd. you are not bricked. You have TWRP installed. You just need to redo some steps.
PM me. and I will help you.
Did you get it fixed?
frome901 said:
Did you get it fixed?
Click to expand...
Click to collapse
He has not responded to my pm
What roms can we use with dirty santa root?
me2151 said:
First off. It will say: Bootloader Unlocked: No
Thats normal. 2nd. you are not bricked. You have TWRP installed. You just need to redo some steps.
PM me. and I will help you.
Click to expand...
Click to collapse
Bricked 2 LG V20s this way any help would be appreciated lol what steps do I need to redo...
TheDantee said:
Bricked 2 LG V20s this way any help would be appreciated lol what steps do I need to redo...
Click to expand...
Click to collapse
In his case we needed to redo from step 3.
I managed to un-brick mines after returning sadly from the Sprint store.
First, get to the boot loader screen and try running thru the steps again, especially step 3. You need to make sure you have TWRP.
Use this link to make sure you can get into the different modes (Download mode, fastboot, etc) http://www.hardreset.info/devices/lg/lg-v20/
Once you can get TWRP to show up,then you are good. In the mean time I downloaded "LS997-deODEXd-signed"
When I got into TWRP, I transferred the file to my phone. Rebooted from TWRP back into TWRP and flashed the ROM.
During my reboots, I do get a message saying my phone is corrupt, blah blahblah, but I just wait a few seconds and it will boot up.
Hope this helps.
I had managed to brick mines only 3 hours after upgrading from my Note 4. It took me from 9pm to almost 2am to get it back up again. I can live with the message about my phone being unbootable until someone comes up with a work thru.
Bricked T-Mobile v20
I have rooted many phones before without an issue, and during the root process for this phone, everything was going great, I flashed SuperSU zip in TWRP and rebooted, since it was flash a new rom on it then i get boot loop with TWRP. so i decide to OEM LOCK again after that everything was stuck on my phone just boot loop with LG so any solutions please help me...... THx u for help me.
Kinda nerve wrecking to read about all these "bricked" phones popping up after trying this method lol.. Perhaps I'll just wait until a more tried and true way comes out...
Dirty Santa root is not for the average user who has a couple of experience in rooting.
You have to at least have background on Hard bricking phones to fully understand what you are getting yourself into
For anyone that isnt on sprint that has "bricked" their phone. There are kdz's that will allow you to reflash back to 'stock". Someone had an issue with the kdz, but it was an easy fix. If you failed the process, it can be restored. Just if it doesnt want to boot, just lock and unlock the bootloader...
If your phone doesnt have a kdz, I know TeamDev is working on a custom kdz for such phones. Don't bug him if it isn't finished as I type this.
Anyone that can't get into TWRP, or has failed the process. Either start back at step 3, or if you have TWRP installed but can't get to it, the manual way to get into TWRP is a pain.
Keep your back cover off and hold the volume down button for ease. Now press the power button and as soon as you see an LG logo, let go and repress the power button. Its tricky.... If you get the corrupted screen, pop your battery out and put it back in quick and repress volume down and power. Usually if Im quick enough the first LG logo will hang a lot longer than usual and that gives me time to enter TWRP. A factory reset screen will pop up. Hit Yes twice.
Please help urgent
lcovel said:
I managed to un-brick mines after returning sadly from the Sprint store.
First, get to the boot loader screen and try running thru the steps again, especially step 3. You need to make sure you have TWRP.
Use this link to make sure you can get into the different modes (Download mode, fastboot, etc)
Once you can get TWRP to show up,then you are good. In the mean time I downloaded "LS997-deODEXd-signed"
When I got into TWRP, I transferred the file to my phone. Rebooted from TWRP back into TWRP and flashed the ROM.
During my reboots, I do get a message saying my phone is corrupt, blah blahblah, but I just wait a few seconds and it will boot up.
Hope this helps.
I had managed to brick mines only 3 hours after upgrading from my Note 4. It took me from 9pm to almost 2am to get it back up again. I can live with the message about my phone being unbootable until someone comes up with a work thru.
Click to expand...
Click to collapse
Please can u help ke unbrick mine i bought this mobile in my country its expensive and has no support. I have tried all tools but still getting the error model unknown please help sir
Jaistah said:
Dirty Santa root is not for the average user who has a couple of experience in rooting.
You have to at least have background on Hard bricking phones to fully understand what you are getting yourself into
Click to expand...
Click to collapse
What does that mean? Not for the average user who has a couple of experiences in rooting.
I've only rooted 2 phones, this is my 3rd (maybe 4th). I am on Sprint. Instructions worked fine for me. I did have one hiccup, but it was my fault, and I was able to root just fine. I've been running for a few months now.
I have not flashed any custom ROM yet, I'm going to wait for the next major version of Android to come out. The only mods I've done so far are Titanium Backup install so I can remove Sprint crap.
yuppicide said:
What does that mean? Not for the average user who has a couple of experiences in rooting.
I've only rooted 2 phones, this is my 3rd (maybe 4th). I am on Sprint. Instructions worked fine for me. I did have one hiccup, but it was my fault, and I was able to root just fine. I've been running for a few months now.
I have not flashed any custom ROM yet, I'm going to wait for the next major version of Android to come out. The only mods I've done so far are Titanium Backup install so I can remove Sprint crap.
Click to expand...
Click to collapse
it means dirty santa root got a high posibility rate of bricking a device compared to other root methods for other devices and if you have no experience in bricking phones before then you're screwed if it happens to you
Actually, if you follow the directions, almost none of the problems create a true brick-- which means unrecoverable. For most of the cases, you might get a soft brick, meaning you have to back out, use a KDZ to repair it or reflash something else, or start over from scratch and try again-- but usually (maybe with some help from here) you can pull the phone back into a usable state.
I would hazard to guess for the vast majority the process works fine, maybe with a hiccup, but I've not seen many reports of a truly unrecoverable brick from this method. It's complicated, yes, and you need to be ready to read a LOT to understand what's going on, but it seems pretty difficult to end up with a $700 paperweight with this.
So i have been trying tonroot my sprint lg v20 and everytime i try and go to the phone on mobile terminal to enter id
Then enter the apply patch /system/bin/atd /storage/emulated/0/dirtysanta i get this message and i cant go to step 2 to boot into recovery
Any help would be appreciated: i have a sprint v20 and i wanted to know if i have to flash the stock sprint rom or can i just flash lineage rom following this guide? I have it running on AT&T and i want to keep it on AT&T...
can you please assist
Could you help out, please? I don't believe I have hard bricked my LG V20 H910. However, I have read and tried all of the unbrick info out. It seems my screw up is unique. I completed dirty Santa then went to flash a custom. in the boot between that. I get a black screen and cant do anything even download mode will not come up. My PC does make its usual noises when i connect or disconnect, but my phone does nothing.
Ok, I managed to brick mine too. It's a VS995, it was running stock 1AC. I used the LGUP tool to downgrade it to VS99512A, and then did Dirty Sanata and TWRP. After booting into TWRP I decided to try lineage OS with Android 8.0, I did not make a backup of the Stock ROM, which was very stupid. Lineage OS 15.1 flashed but I had no cell service so I panicked and instead of wiping it in TWRP and using the backup of stock I should have created, I just opened LGUP and tried to downgrade it back to stock VSS99512A. Well LGUP said it worked, but when it went to boot it would hang at the Verizon logo with 4 pastel dots. Device manager could see an ADB device and I could connect to it with ADB. So I did and read the logcat. I could see it was trying to update as part of the rollback, but it appeared that some components from Android 8x could not be "upgraded" to Andoird 7.x. There was a repeated error about failing to update SQLite instance version from 3 to 1.
The one feature that could fix this is if the refurbish function worked with any of the VS995 KDZ files we all have access to. But alas, none work instead we only get the upgrade function... or so I thought. Somewhere in my search for the past 2 weeks I found a modified LGUP https://forum.xda-developers.com/v20/how-to/guide-patch-lgup-to-unlock-features-t3652222
**Please be warned what I did was absolutely ****ing stupid, and it was sheer luck I didn't screw anything up.**
From what I can tell if you only flash ("LGUP Upgrade") the KDZ from the same model it never clears the partition it just adds to it. My problem was there was stuff from lineage OS 15 stuck on one of the partitions that was making the rollback to stock fail because it kept saying it couldn't update the SQLLite DB from 3 to 1. So no "upgrade" within LGUP would work because the upgrade function does not clear internal storage. But the link above is to a version someone modded so you can force a partition update from any KDZ onto the system. So I started playing around with forcing KDZs from other models onto my VS995, and I noticed when using the Partion DL function with non-VS995 KDZ files it would say something about the partition changing. All I can assume is that the partition layout is so different on each model and it forces LGUP to re-partition the storage.
**Again I state for the record this was stupid, and I'm only fortunate it worked.**
I forced Partion DL of H91510d_00_VTR_CA_OP_1110.kdz, then H990N10b_00_OPEN_HK_DS_OP_1017.kdz, then back to VS99512A_06_1114_ARB00.kdz, then when it booted it gave the Verizon hello, and moved on finally but the setting service kept crashing while it was trying to load the Secure Boot screen. So I yanked the battery and went into the boot menu and did the Factory Reset function, and it worked.
Lesson learned, always make a backup and don't be so hasty to use tools that aren't fully functional (LGUP).
Perhaps what I've done may help others, maybe I've found out how to reimage or unbrick our V20s. Or maybe I just got really stupid lucky.
Edit: My phone is miraculously recovered, see last post for details. Big thanks to everyone throwing in suggestions! :highfive::good:
Edit 2: Here we go again... Had my phone set up for a day and after installing the "App Systemizer" Magisk module, the restart upon booting is back. Please help, is magisk causing this??
So, I'm reaching out because I'm now at a loss. I have no other ideas as to how I could fix my phone.
Background:
A few days ago, I was setting my alarm for work in the morning and I noticed the UI was extremely sluggish. I then locked my phone with the lock button and a notification saying "Powering down..." came up and proceeded to shut off. At this point, I knew I should re-flash my ROM/boot.img first. Didn't help, every boot up ended in the same "Powering down..." message and shutting down within 15 seconds of unlocking the device. At this point, I think to fully wipe and revert to stock. Now, I try to install the latest stock OOS via fastboot. Same result as before when I booted after the fastboot install. And this is where it ended... I tried to use the MSM tool and the device went BLACK with no response after that.
What I've tried:
- fastboot
-MSM Tool
- randomly pressing/holding all physical buttons in every order
- leaving the device plugged in to charge overnight
Conclusion:
Any suggestions other than what I've tried would greatly be appreciated. If, by some chance, my phone is truly bricked... would anyone know about whether T-Mobile would replace the device for me if I act clueless as to what happened to my device? lol, I'm on the Jump! plan, so this phone isn't even paid off yet.
Thanks!
Only time I saw this "powering down" issue was when I updated my phone without disabling my Magisk modules. That time I just removed the module using TWRP and the phone booted.
When you used the MSM tool did it complete successfully? It should take around 5 minutes to restore. Mine took 302 seconds on the dot. That should clear out any and all software issues. If the problem still persists after a successful MSM restore then my thoughts would be hardware damage.
I assume your battery is still working (?), and you can't reach TWRP either?
Have you tried this https://www.getdroidtips.com/oneplus-6t-black-screen-death-issue/ ?
When my 6T didn't respond at all. It would stay black no matter what but I knew it was charged. All I did was hold volume up and the power button for a good 15 to 30 seconds. Then it booted up
Sent from my [device_name] using XDA-Developers Legacy app
Car Transport in mumbai
Car Transport In Mumbai[/URL]
Hey u...I also had the same issue...SHUTTING DOWN...in every boot....and I had fixed it....anyways if u have fixed it ...m glad....if not whatsapp or telegram me on +918898340211
Jager said:
Only time I saw this "powering down" issue was when I updated my phone without disabling my Magisk modules. That time I just removed the module using TWRP and the phone booted.
When you used the MSM tool did it complete successfully? It should take around 5 minutes to restore. Mine took 302 seconds on the dot. That should clear out any and all software issues. If the problem still persists after a successful MSM restore then my thoughts would be hardware damage.
Click to expand...
Click to collapse
MSM didn't even pick up my device... it said something along the lines of "No communication"
F5:ed said:
I assume your battery is still working (?), and you can't reach TWRP either?
Have you tried this https://www.getdroidtips.com/oneplus-6t-black-screen-death-issue/ ?
Click to expand...
Click to collapse
Thanks for the suggestion! Unfortunately, all steps were tried before seeing this post and didn't help.
i7vSa7vi7y said:
When my 6T didn't respond at all. It would stay black no matter what but I knew it was charged. All I did was hold volume up and the power button for a good 15 to 30 seconds. Then it booted up
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
This is important... but did not help me... initially.
sanjeev7 said:
Hey u...I also had the same issue...SHUTTING DOWN...in every boot....and I had fixed it....anyways if u have fixed it ...m glad....if not whatsapp or telegram me on +918898340211
Click to expand...
Click to collapse
Well boys, she's up and running again!
Here's what happened:
- I left my phone on the stock charger (wall-block and cord) to make sure the battery wasn't just dead. This resulted in nothing, still no response from the device.
- Early in the morning, while getting ready for work, I continued to press all physical buttons in any and every order as well as holding different combinations of the buttons. Nothing.
- Gave up, took it off the charger, and tossed the damned thing to the side. I took my iPhone X to work and hated every minute of it lmao.
- I then get off work and decide to mash the physical buttons in a half fit-of-rage and half last-ditch-effort.. and BOOM! The screen flashes with a screen saying the battery is dead in a few different languages.
(I never plugged a device in to charge so fast... lol)
At this point, I decided to fastboot the latest stock OOS (.13) to both A/B partitions and she's like brand new!!!! I spent the day rooting and reinstalling everything today and I'm honestly relieved. :victory: All of my data is lost... pics of my baby sister after just being born and of my fiance But order has been restored.
tl;dr - My phone is fixed, don't ever underestimate the power of button mashing! :good:
..Cory.. said:
MSM didn't even pick up my device... it said something along the lines of "No communication"
Click to expand...
Click to collapse
I suggest you re-read the thread on the MSM tool. It will always work unless there is physical damage to your device. The reason you got the "No communication" error is because you were not in the Qualcom bootloader mode or whatever, not fastboot and not TWRP, there is a third mode accessible by holding certain buttons while plugging in your phone to the computer, in this mode the screen does not light up or anything. Read the thread, the steps are in there. I guarantee that if you can get the MSM tool to restore your phone everything will be working on it.
I even tested the MSM tool once. I wiped all partitions on the phone including the boot partition. The MSM tool can always fix a Software issue.
Edit: Didn't see that you said it was fixed already. My message here is still valid though. Some day you will have to use the MSM tool so it's a good idea to get familiar with it.
Jager said:
I suggest you re-read the thread on the MSM tool. It will always work unless there is physical damage to your device. The reason you got the "No communication" error is because you were not in the Qualcom bootloader mode or whatever, not fastboot and not TWRP, there is a third mode accessible by holding certain buttons while plugging in your phone to the computer, in this mode the screen does not light up or anything. Read the thread, the steps are in there. I guarantee that if you can get the MSM tool to restore your phone everything will be working on it.
I even tested the MSM tool once. I wiped all partitions on the phone including the boot partition. The MSM tool can always fix a Software issue.
Edit: Didn't see that you said it was fixed already. My message here is still valid though. Some day you will have to use the MSM tool so it's a good idea to get familiar with it.
Click to expand...
Click to collapse
Well, like I said... I couldn't just change modes at will... I was legit stuck with the screen completely off and no response to any physical button being pressed. So as long as switching modes was impossible... so was the MSM tool. I read a F*CK-TON of threads before I posted this, I haven't seen anyone else post about being in my situation of not being able to boot into ANY kind of a mode... at all lol.
Bumping to ask for help again...
I had my phone all set up, stable OOS (.13) on both partitions. I installed the "App Systemizer" Magisk module in order to move an app to the system. When I rebooted after the module installation, the "Phone is rebooting..." message comes up after a few seconds post-boot and go straight to recovery every time.
I'm lost at this point. :/
You'd probably be better off seeking support in the mod thread.
..Cory.. said:
Bumping to ask for help again...
I had my phone all set up, stable OOS (.13) on both partitions. I installed the "App Systemizer" Magisk module in order to move an app to the system. When I rebooted after the module installation, the "Phone is rebooting..." message comes up after a few seconds post-boot and go straight to recovery every time.
I'm lost at this point. :/
Click to expand...
Click to collapse
Go to TWRP
go to file manager
Delete /data/adb/ *all files related to Magisk*
This will work
..Cory.. said:
Bumping to ask for help again...
I had my phone all set up, stable OOS (.13) on both partitions. I installed the "App Systemizer" Magisk module in order to move an app to the system. When I rebooted after the module installation, the "Phone is rebooting..." message comes up after a few seconds post-boot and go straight to recovery every time.
I'm lost at this point. :/
Click to expand...
Click to collapse
I have never read about a really bricked OP6T, there is always a solution (and use MsmDownloadTool if nothing else work....).
Now, when you already have "bricked" your phone once and fixed it, you are asking the community for help again... It's obvious to me that you are fiddling around with your device without any clue, and creates a mess for yourself. Why?
Stay outside what you do not understand, and stick to stock version only in the future.
To try to help you, I suggest you use MsmDownloadTool.
WOOOOOOOW.
So this whole time it was Magisk. I never knew about Magisk Manager for recovery. That thing is a MUST HAVE.
So what happened was the new Magisk update broke a few modules I use daily. After using MM to disable every module one-by-one, I found the culprit.
The thing that always gets me is the A/B partition BS. But I guess Magisk was really the pain in my ass!
Closing thread for good, thanks to everyone giving suggestions!!! :good:
Cablespider said:
You'd probably be better off seeking support in the mod thread.
Click to expand...
Click to collapse
Right, thank you! I just feel as if this section is less intrusive for noob questions haha
sanjeev7 said:
Go to TWRP
go to file manager
Delete /data/adb/ *all files related to Magisk*
This will work
Click to expand...
Click to collapse
Thank you! Used this to clean some of the files up when reinstalling the new stable update.
F5:ed said:
I have never read about a really bricked OP6T, there is always a solution (and use MsmDownloadTool if nothing else work....).
Now, when you already have "bricked" your phone once and fixed it, you are asking the community for help again... It's obvious to me that you are fiddling around with your device without any clue, and creates a mess for yourself. Why?
Stay outside what you do not understand, and stick to stock version only in the future.
To try to help you, I suggest you use MsmDownloadTool.
Click to expand...
Click to collapse
If you don't think I deserve help, move on to another thread! :good: No problems here though; I took advice I found helpful and I fixed my phone :victory:
I'm far from a noob though, this is just my first A/B parition device. I had an iPhone for years and was last active on XDA before Magisk was even released.We all need to brush up on the basics every once in a while, though!
..Cory.. said:
Right, thank you! I just feel as if this section is less intrusive for noob questions haha
Thank you! Used this to clean some of the files up when reinstalling the new stable update.
If you don't think I deserve help, move on to another thread! :good: No problems here though; I took advice I found helpful and I fixed my phone :victory:
I'm far from a noob though, this is just my first A/B parition device. I had an iPhone for years and was last active on XDA before Magisk was even released.We all need to brush up on the basics every once in a while, though!
Click to expand...
Click to collapse
Thank you for the arrogance.
I have already tried to help you (twice, in this your own thread). Your arrogant answer tells me that the iPhone-comfort zone suite you best.
In short: you act as an imbecile (since I have experience of you, and have "discussed" with you, before outside this thread).
So, sell your OP6t and buy an iPhone - problem solved.
F5:ed said:
Thank you for the arrogance.
I have already tried to help you (twice, in this your own thread). Your arrogant answer tells me that the iPhone-comfort zone suite you best.
In short: you act as an imbecile (since I have experience of you, and have "discussed" with you, before outside this thread).
So, sell your OP6t and buy an iPhone - problem solved.
Click to expand...
Click to collapse
That systemize tool is not very stable in my experience. There is two location's of system apps in my experience which is most always only about at least half correct a little less than half the time. Is that if you use something like MiXplorer and move the apk into either system apps or priv apps then reboot it is much easier to do than rely on scripts that may not be setup for the device you are using. It shouldn't take any longer than 25.89 seconds to manually move an app.
..Cory.. said:
WOOOOOOOW.
So this whole time it was Magisk. I never knew about Magisk Manager for recovery. That thing is a MUST HAVE.
So what happened was the new Magisk update broke a few modules I use daily. After using MM to disable every module one-by-one, I found the culprit.
The thing that always gets me is the A/B partition BS. But I guess Magisk was really the pain in my ass!
Closing thread for good, thanks to everyone giving suggestions!!! :good:
Click to expand...
Click to collapse
Download the magisk uninstaller zip , put it on your internal storage
So when magisk modules messing up with your boot
Go to twrp, flash the uninstaller zip , reboot to twrp, reflash magisk and then you're be able to boot again to your rom ..
F5:ed said:
Thank you for the arrogance.
I have already tried to help you (twice, in this your own thread). Your arrogant answer tells me that the iPhone-comfort zone suite you best.
In short: you act as an imbecile (since I have experience of you, and have "discussed" with you, before outside this thread).
So, sell your OP6t and buy an iPhone - problem solved.
Click to expand...
Click to collapse
Sorry, I forgot ur the internet law enforcement. Yes, sir! Please dont shoot! :HandsUp: :ShakingInFear: :Terrified: :NotReally: :WatchOut_InternetBadAss:
Jager said:
I suggest you re-read the thread on the MSM tool. It will always work unless there is physical damage to your device. The reason you got the "No communication" error is because you were not in the Qualcom bootloader mode or whatever, not fastboot and not TWRP, there is a third mode accessible by holding certain buttons while plugging in your phone to the computer, in this mode the screen does not light up or anything. Read the thread, the steps are in there. I guarantee that if you can get the MSM tool to restore your phone everything will be working on it.
I even tested the MSM tool once. I wiped all partitions on the phone including the boot partition. The MSM tool can always fix a Software issue.
Edit: Didn't see that you said it was fixed already. My message here is still valid though. Some day you will have to use the MSM tool so it's a good idea to get familiar with it.
Click to expand...
Click to collapse
The MSM Tool does not fix everything. The 6T I have is brand new was working fine until I installed LOS on A & B and deleted the persist partition. I have flashed the original stock rom as well as 3 other OOS roms. MSM Tool completes the flash no problem with no errors, but on every rom it only makes it to the boot screen and hangs. If the MSM Tool is supposed to fix this, then why isn't it getting fixed? I don't know what else to try to fix? Usually it fixes most problems for me, but on this occasion it is not.
The phone is a Moto g7, Verizon river xt1962-1, rooted with Magisk and TWRP.
I wanted to update to Magisk 19.4, so I made a TWRP backup and ran the unroot patch and went back to 19.3, but I still had the problem, so I decided to restore from the backup. After the backup, I am stuck in a bootloop, the whole "Your device is unlocked and cannot be trusted" screen over and over. I can get into TWRP, but no backup that I have tried will fix the boot loop. I tried a few things that just seemed obvious to me, clearing the cache and whatnot, but I am still stuck. I have adb and fastboot at the ready, but I don't know where to go from here.
I do not even know what build I am running, I cannot get into System / About to see, and I am not savvy enough to know any other way to find out. I know that it was current stock, missing only the most recent patches.
Is there a way that I can restore my phone? I would be grateful for any help. Damn, I love this g7 so much more than the Note phones that I had been using for years, but I was at least a little familiar with them. Thanks for any help.
Sounds like you'll need to fastboot flash a stock rom to your phone, use TWRP to get into the bootloader/fastboot mode, and also sounds like you messed up the boot.img when you were trying to go through that process. I just updated the Magisk app from within the app itself - no issues there. Might be a good time to update to a newer stock rom as well, might as well take advantage of the situation amirite?
But just for different options, here may be some useful links
Keep in mind, I haven't used either one of the methods in either links and I am not responsible for anything that occurs from your actions.
idk about this one but looks like it may help
https://forum.xda-developers.com/moto-g7/how-to/how-to-fix-g7-xt1962-1-stuck-bootloader-t3917792
this next one has the flashboot commands you'd need to also update your ROM
https://forum.xda-developers.com/moto-g7/how-to/moto-g7-xt1962-1-riverretail9-0ppos29-t3969067
Keep in mind, I haven't used either one of the methods in either links and I am not responsible for anything that occurs from your actions.
Anyways, good luck!
SmilingPerson said:
The phone is a Moto g7, Verizon river xt1962-1, rooted with Magisk and TWRP.
I wanted to update to Magisk 19.4, so I made a TWRP backup and ran the unroot patch and went back to 19.3, but I still had the problem, so I decided to restore from the backup. After the backup, I am stuck in a bootloop, the whole "Your device is unlocked and cannot be trusted" screen over and over. I can get into TWRP, but no backup that I have tried will fix the boot loop. I tried a few things that just seemed obvious to me, clearing the cache and whatnot, but I am still stuck. I have adb and fastboot at the ready, but I don't know where to go from here.
I do not even know what build I am running, I cannot get into System / About to see, and I am not savvy enough to know any other way to find out. I know that it was current stock, missing only the most recent patches.
Is there a way that I can restore my phone? I would be grateful for any help. Damn, I love this g7 so much more than the Note phones that I had been using for years, but I was at least a little familiar with them. Thanks for any help.
Click to expand...
Click to collapse
Try to flash the stock boot.img and you'll be fine. If you haven't got a stock boot.img you will find a backup of it in your /data partition (magisk does a backup of it by default). Just unpack the TWRP backup of your /data or download the latest firmware to get a boot.img
WoKoschekk said:
Try to flash the stock boot.img and you'll be fine. If you haven't got a stock boot.img you will find a backup of it in your /data partition (magisk does a backup of it by default). Just unpack the TWRP backup of your /data or download the latest firmware to get a boot.img
Click to expand...
Click to collapse
Mate, I can't thank you enough, now I am back up.
I took advantage of the oppotunity to do a Titanium backup and flash the latest firmware, since I was still running old security updates.
I am not sure why the TWRP backups caused a bootloop, that concerns me. I am diligent about making one before any significant change, and now I see that none of them were good. It might be that the backup I applied included boot, and somehow that caused an issue.
In any case though, thanks a million. I would PM you a beer, but they tend to go flat when they hit the first ATM gateway. Hops and TCP encapsulation don't seem to be compatible, especially at > 9600 baud ?
zenful said:
Sounds like you'll need to fastboot flash a stock rom to your phone, use TWRP to get into the bootloader/fastboot mode, and also sounds like you messed up the boot.img when you were trying to go through that process. I just updated the Magisk app from within the app itself - no issues there. Might be a good time to update to a newer stock rom as well, might as well take advantage of the situation amirite?
But just for different options, here may be some useful links
Keep in mind, I haven't used either one of the methods in either links and I am not responsible for anything that occurs from your actions.
idk about this one but looks like it may help
https://forum.xda-developers.com/moto-g7/how-to/how-to-fix-g7-xt1962-1-stuck-bootloader-t3917792
this next one has the flashboot commands you'd need to also update your ROM
https://forum.xda-developers.com/moto-g7/how-to/moto-g7-xt1962-1-riverretail9-0ppos29-t3969067
Keep in mind, I haven't used either one of the methods in either links and I am not responsible for anything that occurs from your actions.
Anyways, good luck!
Click to expand...
Click to collapse
Thanks man, I really appreciate it! I did take advantage of the opportunity to update, something that had been bugging me for a while anyway.
I had updated Magisk to the beta through Manager, but a problem came up and I needed to step back to the stable version. That was where I messed up.
In a way though, it was just as well, since it forced me to spend a little time reading about the G7 ecosystem, something I really hadn't done much of yet. It used to be fun keeping up and flashing nightlies, etc, but over the past few years, it has got away from me. If it wasn't for a few specific things, I would almost stay stock. But I get uncomfortable thinking about the ridiculous amount of personal information a stock phone releases about us, so things like Signal and xPrivacylua are important to my sense of well being. Even if some of it is placebo.
zenful said:
Sounds like you'll need to fastboot flash a stock rom to your phone, use TWRP to get into the bootloader/fastboot mode, and also sounds like you messed up the boot.img when you were trying to go through that process. I just updated the Magisk app from within the app itself - no issues there. Might be a good time to update to a newer stock rom as well, might as well take advantage of the situation amirite?
But just for different options, here may be some useful links
Keep in mind, I haven't used either one of the methods in either links and I am not responsible for anything that occurs from your actions.
idk about this one but looks like it may help
https://forum.xda-developers.com/moto-g7/how-to/how-to-fix-g7-xt1962-1-stuck-bootloader-t3917792
this next one has the flashboot commands you'd need to also update your ROM
https://forum.xda-developers.com/moto-g7/how-to/moto-g7-xt1962-1-riverretail9-0ppos29-t3969067
Keep in mind, I haven't used either one of the methods in either links and I am not responsible for anything that occurs from your actions.
Anyways, good luck!
Click to expand...
Click to collapse
Thanks man, I really appreciate it! I did take advantage of the opportunity to update, something that had been bugging me for a while anyway.
I had updated Magisk to the beta through Manager, but a problem came up and I needed to step back to the stable version. That was where I messed up.
In a way though, it was just as well, since it forced me to spend a little time reading about the G7 ecosystem, something I really hadn't done much of yet. It used to be fun keeping up and flashing nightlies, etc, but over the past few years, it has got away from me. If it wasn't for a few specific things, I would almost stay stock. But I get uncomfortable thinking about the ridiculous amount of personal information a stock phone releases about us, so things like Signal and xPrivacylua are important to my sense of well being. Even if some of it is placebo.
SmilingPerson said:
Mate, I can't thank you enough, now I am back up.
I took advantage of the oppotunity to do a Titanium backup and flash the latest firmware, since I was still running old security updates.
I am not sure why the TWRP backups caused a bootloop, that concerns me. I am diligent about making one before any significant change, and now I see that none of them were good. It might be that the backup I applied included boot, and somehow that caused an issue.
In any case though, thanks a million. I would PM you a beer, but they tend to go flat when they hit the first ATM gateway. Hops and TCP encapsulation don't seem to be compatible, especially at > 9600 baud
Click to expand...
Click to collapse
I'm glad to hear that! Don't worry about the beer!
I had similar issues with my Moto g6+... Either the /data encryption or Magisk is the reason for a failed backup. Both can cause a bootloop. But it's always good to have a stock boot.img.
I'm reading this because of the same issue in a Moto G7 Power. I haven't been able to make it restore a backup at all of either stock or custom. Oh, it will restore it just won't boot. I think it has something to do with the A&B system slots. We use a TWRP that was made for system with A&B slots but then we flash a copy partition zip That I'm not sure what it does. Maybe I should take it apart and have a look. . Has anyone been able to restore a backup in the G7?
arkansawdave74 said:
I'm reading this because of the same issue in a Moto G7 Power. I haven't been able to make it restore a backup at all of either stock or custom. Oh, it will restore it just won't boot. I think it has something to do with the A&B system slots. We use a TWRP that was made for system with A&B slots but then we flash a copy partition zip That I'm not sure what it does. Maybe I should take it apart and have a look. . Has anyone been able to restore a backup in the G7?
Click to expand...
Click to collapse
Do a full restore of boot, system and data.
Is data...
...encrypted => Then format data (not wipe!!) and reboot into system. When you see the "Welcome Screen" turn off your device and boot into TWRP again. Restore data and it should be fine.
...unencrypted => Then format data and restore data (w/o reboot!!)
Hi, I've been struggling big time to update my device to Android 13. I bought mine when only 1.1.7 hotfix was out and therefore, now that I have unlocked the bootloader (yes, even unlock critical) and rooted the device, I'm not able to install 1.1.8, let alone Android 13. I have already bricked one and managed to get a new one but I don't want to risk it again. I've searched all over Google to a proper guide to update to Android 13, even with sideload, but it gives me an error regarding the payload file, at about 48% of the progress. Tried the *#*#682#*#* method but it stops with error code 20. I have tried flashing the stock boot file but same thing, code 20 from manual update. I'm pretty much desperate at this point and I'm even thinking about unrooting, lock the bootloader again and hopefully update it without an itch, but I really wouldn't want to wipe the device, so, if there's somebody there that could help me through a 100% working process, I'll always be in your debt.
Enzucuni said:
Hi, I've been struggling big time to update my device to Android 13. I bought mine when only 1.1.7 hotfix was out and therefore, now that I have unlocked the bootloader (yes, even unlock critical) and rooted the device, I'm not able to install 1.1.8, let alone Android 13. I have already bricked one and managed to get a new one but I don't want to risk it again. I've searched all over Google to a proper guide to update to Android 13, even with sideload, but it gives me an error regarding the payload file, at about 48% of the progress. Tried the *#*#682#*#* method but it stops with error code 20. I have tried flashing the stock boot file but same thing, code 20 from manual update. I'm pretty much desperate at this point and I'm even thinking about unrooting, lock the bootloader again and hopefully update it without an itch, but I really wouldn't want to wipe the device, so, if there's somebody there that could help me through a 100% working process, I'll always be in your debt.
Click to expand...
Click to collapse
The best part of this whole thing is that you're rooted.
Do a backup with Swift Backup or what ever your backup app you prefer. Wipe it back to stock without locking the bootloader, make sure your sim card is not inserted then do your OTA updates.
As for the second device you bricked, there's a unbrick tool here:
unbrick tool- EDL Flash-Read-Repair Region Change tool
unbrick tool Now available for Nothing Phone1.. Features: Read Firmware (EDL) (locked bootloader) Flash Firmware (EDL) (locked bootloader) backup EFS (EDL) (locked bootloader) Wipe FRP & userdata (EDL) (locked bootloader) Size: 2.7GB Version...
forum.xda-developers.com
Just need to get or make a EDL cable then flash and you'll be back in business.
HermitDash said:
The best part of this whole thing is that you're rooted.
Do a backup with Swift Backup or what ever your backup app you prefer. Wipe it back to stock without locking the bootloader, make sure your sim card is not inserted then do your OTA updates.
As for the second device you bricked, there's a unbrick tool here:
unbrick tool- EDL Flash-Read-Repair Region Change tool
unbrick tool Now available for Nothing Phone1.. Features: Read Firmware (EDL) (locked bootloader) Flash Firmware (EDL) (locked bootloader) backup EFS (EDL) (locked bootloader) Wipe FRP & userdata (EDL) (locked bootloader) Size: 2.7GB Version...
forum.xda-developers.com
Just need to get or make a EDL cable then flash and you'll be back in business.
Click to expand...
Click to collapse
First bricked device was replaced in RMA. But yeah, rooted, unlocked and yet nothing works. I was thinking about wiping it, even if I don't really want to because it's a pain every time. Man, Android modding when to ****e and I'm leaning more and more towards getting an iPhone and call it a day, maybe with a jailbreak
Enzucuni said:
First bricked device was replaced in RMA. But yeah, rooted, unlocked and yet nothing works. I was thinking about wiping it, even if I don't really want to because it's a pain every time. Man, Android modding when to ****e and I'm leaning more and more towards getting an iPhone and call it a day, maybe with a jailbreak
Click to expand...
Click to collapse
Swift does their backups well so from wipe to setup depending on how many apps ya got took like 20 mins to do?
Once you get to A13 tho, my god the battery life is amazing. I don't use my NP1 as a daily driver but it sits in my pocket along with my daily OP7Pro and it out lasts it by a mile. Really hyped for the NP2 and what they bring optimization wise.
Or in your case you could carry both and see how you feel about it xD
Oh and it's likely the patched boot image (while rooted) that's causing the update errors. Once you restore the stock boot image you should be able to update without issue.
HermitDash said:
Swift does their backups well so from wipe to setup depending on how many apps ya got took like 20 mins to do?
Once you get to A13 tho, my god the battery life is amazing. I don't use my NP1 as a daily driver but it sits in my pocket along with my daily OP7Pro and it out lasts it by a mile. Really hyped for the NP2 and what they bring optimization wise.
Or in your case you could carry both and see how you feel about it xD
Oh and it's likely the patched boot image (while rooted) that's causing the update errors. Once you restore the stock boot image you should be able to update without issue.
Click to expand...
Click to collapse
I actually restored it but to no avail. Same errors as described
Enzucuni said:
I actually restored it but to no avail. Same errors as described
Click to expand...
Click to collapse
Welp, back to stock you go then haha ADB it to EDL then run the unbrick tool and you should be at 0
I might be actually lazy enough to wait for a hint of a custom twrp-like recovery and go from there
Enzucuni said:
I might be actually lazy enough to wait for a hint of a custom twrp-like recovery and go from there
Click to expand...
Click to collapse
Might not be stable on first release but yea that's in the rumor pipelines
Yeah, I think I'll wait. A12 is still really nice. Some bugs here and there but perfectly usable and battery is basically infinite.
First of all, to jailbreak the iPhone and set it up correctly with all the needed software that jailbreaking provides nowdays ... is actually harder than it was a few years ago.
Secondly, if you had just read through the full topic containing the Nothing OS repo, you would have found several people with the same problem that u had, who had solved it successfully.
Go back to stock, wipe, and redo the official step-by-step of updating, will work like a charm. if you want to jailbreak. First, read through the posts of others to see if there are any problems that you would like to avoid, and if there are, don't do it.
You are lucky enough to have had your first device replaced by a new one just like that. Updating while rooted was always a problem for Android, and it always varied per device. it was up to the one who is rooting to check the situation regarding his/her specific model
You could try flashing the fastboot ROMs made by @ot_inc (it's not 100% safe for your data so make a backup in any case).
[Restore NothingOS & Magisk] Nothing Phone(1) Fastboot ROM(Full ROM) & boot.img Global v1.1.6
Fastboot ROM and boot.img for NothingPhone(1) are now available. v1.1.6 is available. Sorry for my poor English, I'm Japanese. https://reindex-ot.github.io/
forum.xda-developers.com
kriistofor said:
First of all, to jailbreak the iPhone and set it up correctly with all the needed software that jailbreaking provides nowdays ... is actually harder than it was a few years ago.
Secondly, if you had just read through the full topic containing the Nothing OS repo, you would have found several people with the same problem that u had, who had solved it successfully.
Go back to stock, wipe, and redo the official step-by-step of updating, will work like a charm. if you want to jailbreak. First, read through the posts of others to see if there are any problems that you would like to avoid, and if there are, don't do it.
You are lucky enough to have had your first device replaced by a new one just like that. Updating while rooted was always a problem for Android, and it always varied per device. it was up to the one who is rooting to check the situation regarding his/her specific model
Click to expand...
Click to collapse
Where is the step by step ? The one that actually works ?
hmm, honestly it may be on somewhere in the first few pages (not the first one) but you can also search the google, now there are several sites quoting options for updating nothing phone.
sorry if i sounded harsh
anyways, if you go back to stock, and update the device from 1.1.7 to 1.5 incl. all hotfix updates, it should go smoothly.
I also said if you want to jailbreak in one moment in my post when i meant to say if you want to root.
Rooting nowdays is easy and hard at the same time. easy to pull off, but hard to understand that now there are several different steps that need to be done to turn the rooted device into a fully functional one. and for many it is not worth it, but for those that are interested, I would just advise reading through all the posts carefully and learning to search efficiently. Not only will you find the answer yourself, thus remembering it more clearly, but you will also be introduced to facts you were unaware of.
good luck, the most important step is to go back to stock succesfully, read the whole nothing os repo thread just to make sure you are not missing something
kriistofor said:
hmm, honestly it may be on somewhere in the first few pages (not the first one) but you can also search the google, now there are several sites quoting options for updating nothing phone.
sorry if i sounded harsh
anyways, if you go back to stock, and update the device from 1.1.7 to 1.5 incl. all hotfix updates, it should go smoothly.
I also said if you want to jailbreak in one moment in my post when i meant to say if you want to root.
Rooting nowdays is easy and hard at the same time. easy to pull off, but hard to understand that now there are several different steps that need to be done to turn the rooted device into a fully functional one. and for many it is not worth it, but for those that are interested, I would just advise reading through all the posts carefully and learning to search efficiently. Not only will you find the answer yourself, thus remembering it more clearly, but you will also be introduced to facts you were unaware of.
good luck, the most important step is to go back to stock succesfully, read the whole nothing os repo thread just to make sure you are not missing something
Click to expand...
Click to collapse
Umm.. no, you're not sounding harsh. And I've already done that: "google it" and stuff. This is why I post teh question here. This is not my first time at this lol !
kriistofor said:
hmm, honestly it may be on somewhere in the first few pages (not the first one) but you can also search the google, now there are several sites quoting options for updating nothing phone.
sorry if i sounded harsh
anyways, if you go back to stock, and update the device from 1.1.7 to 1.5 incl. all hotfix updates, it should go smoothly.
I also said if you want to jailbreak in one moment in my post when i meant to say if you want to root.
Rooting nowdays is easy and hard at the same time. easy to pull off, but hard to understand that now there are several different steps that need to be done to turn the rooted device into a fully functional one. and for many it is not worth it, but for those that are interested, I would just advise reading through all the posts carefully and learning to search efficiently. Not only will you find the answer yourself, thus remembering it more clearly, but you will also be introduced to facts you were unaware of.
good luck, the most important step is to go back to stock succesfully, read the whole nothing os repo thread just to make sure you are not missing something
Click to expand...
Click to collapse
You said, "Go back to stock, wipe, and redo the official step-by-step of updating, will work like a charm."
Where are you getting this from ?