Related
Hi everyone,
Before blasting away with comments as to why I would do this, here's my story,
I live in Canada and just brought home a i9508, a China variant of the S4. It belonged to my dad and he didn't want it so I just took it. The i9508 doesn't have Play Store, and it doesn't work on Canadian 3G network.
So to me, the phone is useless right off the start (don't intend on selling it either, who wants it?) So I had 2 options:
1) Leave the phone as it is, and probably use it once every 1-2 years when I visit HK
2) Flash custom roms on it fully aware of the risk it will have so that there's a possibility I can make it more usable
So in the end I went with option 2.
I followed a guide and flashed TWRP for i9505 using Odin onto the phone, and used TWRP to install chainfire SU, and it actually worked (but SU wouldn't open because some sort of security on the phone is blocking it)
Next step, I downloaded the CM version for i9505 and flashed onto the phone, and that worked too. Only problem I've encountered was that the phone would only boot after a fresh install. If I installed CM, turned the phone off after the initial start up, the phone wouldn't boot pass the Samsung logo.
Up until this point, I didn't make a backup, because of my arrogance, cause I have available a copy of the official firmware, in case anything happens.
So I figured at this point, maybe if I restore the original firmware, and try the whole process again, the custom rom would work. So I went into Odin, flash the firmware with PDA, and failed. It just wouldn't work. After retrying it a couple of times, and downloading different updates of the firmware, nothing worked. Only thing working right now is, I can get into Download mode, and I can get into TWRP recovery (but for some reason, I can't flash the zips that I've adb pushed onto the phone, zip can't open)
For me, if it can't be fixed, then it's really SOL. But if there's a way to fix it, I'm open to testing anything people have in mind, cause afterall, this phone is paper weight either way. I'm interested in seeing if I could enable 3G by flashing a i9505 radio, despite warnings, although, I've never actually came across a thread where someone had actually tried it before.
Either way, if someone has any idea on how to fix the phone, and wouldn't mind sharing it, that'll be greatly appreciated.
Working
I can get into Download mode, but Odin is failing (if you need the error please let me know and I'll post it)
I can get into TWRP recovery, but can't flash files
I can get into adb
This isnt the correct forum for your phone. XDA don't follow clones
Unfortunately a section for i9508 doesn't exist, so I figure the closest one would be i9505.
Anyhow, if someone has an idea of how to fix it, I'm more than happy to do testing on it, like flashing other roms or radios.
I already opened an RMA for the phone but they have no stock so I figured I'll take another shot at it.
The short version is that my gf messed up and updated the system while transferring her data from her old phone with the tapNgo thing.
I've done multiple facory resets, downloaded the rom from ZTE support, put it on SD, flashed it from recovery and deleted cache and nothing helps.
I don't have the exact error log anymore since I don't have the phone with me now but it reads something along the lines of
loading /proc/devices/audio/sound------ cannot find file/directory.
I looked it up and after a lot of Googling it seems like the symlink to the actual driver folder is missing and I have no idea why.
Does anyone know if i can fix this with an ADB shell?
Alternatively, I tried to follow some of the many guides out there to put the phone in EDL mode and relfash it with XiamiFlash utility but after trying 3-4 downloads and 900 versions of misflash all I ever get is "reading hello packet... unable to communicate to com4"
Haaaalp please?
*edit* this is pretty much exactly the same as what I'm getting: https://forum.xda-developers.com/android/help/sound-card-detected-t3379736
The problem with the phone is it makes no sounds?
gpz1100 said:
The problem with the phone is it makes no sounds?
Click to expand...
Click to collapse
the sound drivers for the OS is missing completely, no sound no microphone.
The syslog looks like this(this is from another phone its its the exact same problem):
AudioDaemon: Opening sound card state : /proc/asound/card---/state
AudioDaemon: Open /proc/asound/card---/state failed : No such file or directory
AudioDaemon: Sleeping for 100 ms
Strange issue indeed. Which model do you have? Which specific firmware file are you flashing to it?
I would think flashing the full unmodified factory firmware using the stock recovery will wipe the phone completely, including the /data partition.
Everything worked before? Help me understand the order of events. What is tapngo?
While in the midst of transferring information to or from the phone, a software update appeared and she accepted/installed it?
Its the A2017U model.
I had tried the 1.1.0 B15 firmware from SD card as well as the 1.0.0 B29 older firmware.
Right now its on B17 Nougat 7.1.1, the phone runs and works perfectly just has no audio hardware.
I wasn't there for the exact procedure but basically she powered it on, it asked for sim, she inserted that, tapped the "transfer my data" and then held the two phones together to get the NFC process started. That starts the bluetooth transfer process and it takes a really long time where it transfers all data and apps from the old phone.
At this point the phone still made sounds when adjusting the volume etc.
Somewhere in that process the "update available" notification came up and she pressed the option to install it.
After I got home I tried to figure out what is wrong, first i thought the phone wasn't registered on the cellphone network but then after a bit i figured out the audio is the issue, then i did a factory reset both from the phone UI and tried again from recovery mode, both times chose the "erase all data" option but neither time did it help at all.
I don't really know enough about phones but i think its the bootloader/something very early on thats messed up. Either that or the audio chip really just did fry.
My hope was to get the full factory image for everything that you need to install with the EDL mode thing but I can't find any good reliable guides for that.
It's the first thread in the development section.. Stickied even.
https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
Get this package - B15-NEW_FULL (Nougat)
I really don't understand zte's numbering scheme. Newer versions get lower numbers. Makes no sense. That's the full firmware except for the fastboot which passes commands. At this point it's a non issue given the issue you're having.
So I don't need to load TWRP on it, I can still keep it just stock with unlocked bootloader?
I tried that miflash thing before, i had it connected un usb download mode but nothing worked for me, I'll try doing this guide when i get home step by step again.
Their firmware numbers is based on numbers and letters 1.0a-z and then 1.1a-z so 1.0z1 is less that 1.1a1
Ok I have an update
Did miflash, nothing changed.
Ulocked bootloader and miflashed the bootloader from the sticky thread.
The phone made the startup sound and audio worked for a few seconds after android started up and then stopped again
*edit*
ok so after it showed signs of life i re-locked the bootloader, and did the OTA updates to 7.1.1 and the audio seems to be working for good now!!
Conclusion seems to be the bootloader was the key to get it working again. Hope this helps others if it comes to it.
So I've been rooting me phone for a while and have managed to never f*** up, till now, and I sincerely hope you guys can help me.
After rooting my S7 a while back, I just recently noticed SuperUser telling me that I didn't have root anymore, so I decided to follow these instructions to re-root my phone:
https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039
I successfully followed all the steps to get root, but when I opened Flashfire it told me I could install a new update while maintaining root, so since my android is at 6.0.1, I did that and it bricked my phone.
On boot it says "Startup Failed - Use the Verizon Software Repair Assistant . . . " and on top it also says "Custom binary blocked by SECURE BOOT." I have tried going into recovery mode and deleting the system cache, but that doesn't do it. So is there any way to get the phone to properly boot while not deleting my data? I was rooting my phone precisely so I could use Titanium Backup again, so I don't have any backups stored anywhere. I have heard that flashing a recovery image with Odin can work, but would that delete my files? Someone please lend me your expertise.
My phone is a Verizon S7.
Fixed
I am surprised that no one responded to me, but what's important is that, miraculously, I managed to un-brick the phone myself without losing any data! What I did was, as my last hope (since Odin wasn't able to flash the stock image, a la the traditional soft-brick fix), decide to follow the on-screen instructions my phone was giving me and to download and run something called the "Verizon Software Repair Assistant," which can be found in the top google results after searching for the quoted name (xda doesn't let me post the link).
After putting my phone into download mode, I plugged it in, ran the software and let it work overnight. Checking on it in the morning, I found my phone, not only completely functional and working, but updated to Android 7.0 (it was 6.0.1 previously before the failed Flashfire OTA update) and still holding all of my data intact.
So, the interesting thing that I learned is that flashing to stock via Odin to fix a soft-bricked phone should not be the default resolution for potentially most people, as the carrier's default (in my case, Verizon's) repair utility managed to completely fix my phone without any side effects or data loss.
Is there anyone who could chime in on why the Repair Utility did not wipe my phone's memory, even though it warned it would?
**Note**
Verizon links to the Windows version of the repair assistant on their site, but to get the Mac version (which I used), the only way you can get it is by changing the end of the url they mention within the thread from "Win" to "Mac."
Pleased you managed to fix it, and thanks for posting the method for others
As for replies, if you stick around XDA you'll see replies can take days sometimes, patience is the key here
*Detection* said:
Pleased you managed to fix it, and thanks for posting the method for others
As for replies, if you stick around XDA you'll see replies can take days sometimes, patience is the key here
Click to expand...
Click to collapse
I guess I am not acquainted with this forum enough then, thanks!
Most likely the cause of the fault would be updating via FlashFire and keeping root. When the update was flashed, it most likely flashed the stock kernel and patched it for root, which is not a compatible root for our devices. Flashing the root kernel with Odin probably would have made the phone boot normally.
Hi. Been waiting a while to post this, and playing around based on what I see, but I the last change I made to my phone hasn't worked out too well and I don't think I have enough of a grip on the process. I am an ex-computer 3rd level tech support so I have reasonable skills around computers etc.
I bought an Axon 7 (A2017G) in Germany but it got flooded one day when it went down the toilet pan, literally. So I replaced it with a 128 Gb model from China, not really thinking about the software versions. Of course it came with A2017, and more importantly, no ability got OTA upgrades from Android 6.
So recently I've been having some battery life issues so I've changed the battery.
Following guides here, I've managed to get it onto a newer A2017 version and it has taken an OTA upgrade to Android 7. The build number is B13. The boot loader is still unlocked. But it's not very stable and Google Play service has now stopped, and I can't be doing with the unreliability. And tbh although it worked, I can't remember exactly which guide or what steps I followed to do it.
So I want to put it onto a stock G version, which I think seems to be possible, based on stuff I've read here. I don't think I need root going forwards (once this is done) and I'm looking for the simplest method. Unfortunately, due to the length of time it's been live, this forum really is information-overload and I've been reading for two days now and made loads of notes but I'm not really very clear about what I need to do.
I'm quite happy to find and read the right guides but would be really grateful if someone could take a few minutes to just tell me exactly which bits are essential to be upgraded and what steps I do need to follow. If I am confused I can come back with any queries.
I'd be happy to root the phone if it's felt that is a really useful thing but I'm not really a "power user" and I'm OK with standard.
Also I'm assuming any upgrade would receive any future Android releases OTA (if there are any for this phone), but if not that's not too vital.
Thanks in advance...
Geoff
But regarding your situation: You have an A2017 with A2017G firmware, right? Can you tell us your firmware version?
Would you be fine with Chinese firmware (MiFavor 5.2, B17) or prefer stock+ (G B01/B02, U B12)?
Thanks for the quick response, really appreciated.
The firmware is still A2017 version AFAIK, but I don't know where to check. If I go to the boot loader screen it says ZTE/P996A03_N/ailsa_ii and on the next line 7.1.1/NMF26V/20170912.013327
I'm thinking I'd do the change from A2017 to A2017G to get round the annoying junk which came with the Chinese version, and also avoid the Google Play Services problem I came across. It may not be do-able but I thought I'd read it was.
I guess in addition to telling me the steps, telling me exactly which file versions to use would help a lot. I promise to keep notes!
I don't mind which firmware, so long as it works reliably and so long as I can preferably put a G version on it.
of course it's doable, the thing is that you'll need to unlock the bootloader in order to.
If you had trouble with Play Services then it's most probably on chinese firmware, finding out would be as easy as going to Settings, then About phone
The boot loader is still unlocked from when I managed to do the previous upgrade. That took me quite some hours, and it was more by luck than judgement that I got a result. This time I want to better understand what I'm doing.
Not sure what I'm looking at for the firmware, isn't it the versions I quoted above? But the menus (mostly) are in Chinese at start up, and I had to load Google Play and Play Services from the ZTEYR store so I'm pretty sure it is on Chinese firmware.
So if it is, do I just need to upgrade the firmware then the ROM (is that the terminology?). If so which versions would I use?
Ta
Geoff
EDIT I missed the kernel version - which is 3.18.31
OK so I've spent more time reading. I'm coming to the conclusion that I don't need TWRP and I don't need to update my Chinese bootloader, does that sound about right?
Is it right that all I need to do is
- find a G firmware zip file <<< may have incorrect terminology here, would appreciate a pointer to a valid download as I have many but not sure they are the right type of file
- put it on an SD card named as update.zip
- boot into recovery mode
- choose "apply update from SD card"
And, assuming I have used a stock version, will it then update to the latest version (hopefully Oreo) once it's started?
Do I need to do any formats or wipes anywhere in the process? I already have a backup of my stuff, done with AXON7Toolkit.
And can you recommend a version of firmware to go to, or does it not really matter as it'll update itself anyway?
UPDATE: MiFavor UI is v5.0
OK, so there is no real short easy answer to this.
I've used the updates from ZTE since I've had the phone until I soft bricked it.
Zte offer updates similar to this.
Eg: B06 to B08 or B08 to B09 and B09 to B12
The update has to be done in stages.
Some updates you can copy to the internal SD card then go settings > system > update, your phone should detect the updates and tap install.
Some Zip files can be done the same way after changing the file name to update.zip or Ota.zip depending on the instructions.
Some zip files have the update within the Zip so it needs to be extracted.
Make sure you have the correct version software and correct version for your phone.
After the update is done all the data etc will be still in place unless you reset your phone.
All I can say is research, research, research.
Btw if your bootloader is unlocked some updates will fail.
I hope this helps
PS: you can use the method you described as well, just follow the instructions carefully.
In most cases there is no need to wipe or format unless you are using a custom ROM etc.
Excellent, thanks.
Going back a post or two - I re-installed Google Play services but still have problems. Before a reboot it appears in the list of apps, and Play opens, but the sidebar comes straight in and behind there is a message "Error while retrieving information from server [RH-01]" . After a reboot it is no longer in the list of Apps (even when expanded to include System apps), and Play just opens and closes real quick.
So I found a thread which led me look in Settings in Play Store at the Play Protect Certification, which says the device is not certified. So I downloaded the related app and ran it, which gave me a code which I put in web page then entered the stuff into my phone but still no joy. I suspect this is causing the Play problem and I think it'd be due to trying to use Google product on a Chinese firmware (again I'm not sure my terminology is right - I mean whatever the software is which throws up the initial boot screen).
So I think I need to get off the Chinese firmware at the same time as going to a G version, and I'm even less clear on how to replace the firmware than the rest of the process - what files and how it's done.
Going back to the more recent post (Syberclone), as I have already wiped my phone I'm not concerned about keeping data. I understand about doing this is steps - I hadn't thought of doing it that way but it seems very sensible.
I found a post by Raystef66 with loads of links to software - including A2017X_B15_Universal_Bootloader.zip. Does this replace the Chinese firmware and would it work with all zipfiles? How would I apply it? (I was using Axon7ToolKit the other day and that looks quite impressive).
I am still confused over the different types of files and the naming conventions but it's slowly making more sense. Appreciate all advice.
Thanks
Geoff
Personally I use Edl packages much easier imo.
I use Miflash or Edl tool by @djkuz
I have a bad flash help page that explains the process.
The bootstacks etc are mainly for custom ROMs, if you are just looking a factory firmware, Edl's are much easier to install without worrying about bootstacks, twrp etc.
My last Edl update was from Nougat (Chinese Rom)
To Oreo A2017G I had to factory reset after the install though.
Thatnks. Today I've done a fwe more hours reading, literally. This is taking all my time!!
Anyway I decided to follow your advice and found a full EDL of Oreo, which I applied. (ZTE_A2017V3.0.0B17) and the phone is still working, and I've not lost my apps.
However I still have the problem that Play Services won't run. I've upgraded it, followed a few troubleshooting guides, used different versions ( - should I be using the 64 bit one??) but still no joy. If I could only get that going I'd stick with the Chinese firmware. It is looking to me like it can't sync, though whether that's a cause or an outcome I'm not sure. Not unexpectedly, a number of apps will not run as a result.
I haven't done a factory reset yet, I thought I'd ask here first to see if that is likely to fix it or whether anyone has any better ideas.
Despite the time this is taking I'm enjoying learning and am grateful to you all for the responses.
The play store link "device not certified" will happen when you change a ROM from its original.
So I have an A2017G, when I run any other ROM it will show "device not certified" because the link between the phone and the software isnt in sync.
When I was running the beta Oreo from the Chinese my device always had this issue and NFC does not either usually.
There is a play store app version which will work as it should however the certified is still a problem without a work around.
When I installed the G version Oreo to my device the certification is back.
I'm miss some of the Chinese ROM animations tho.
Anyway I hope this helps
I am using an A2017 ROM on an A2017. I've not changed anything else. Maybe I need to update the boot stuff (firmware?).
What I'm seeing is that Play Services always needs to be manually enabled, and seems to drop out and require re-installation sometimes. So I have an apk on my internal memory for quick access.
I'm not sure that the "device not certified" is a cause or effect really.
So I have an apk on my internal memory for quick access. It's the latest non-beta 64bit version for Android 8 - should I try a specific one, e.g. is there likely to be a specific one which matches the ROM? (An older non 64 bit one seemed to give much the same problem)
I'd put up with the problem except I can't run some Google stuff at all (Play Store for instance), and some other stuff is compromised (e.g. I can't get into Waze on my usual ID, I'm guessing Play Services plays a part in authorizing). And I can't install some stuff I'd like.
And I'd still be interested to know which bits require upgrade to go to a G version, if it is do-able and would run trouble free.
There was a play store app that worked on most ROMs.
You are on Oreo now yes?
There was a link on one of the Android pie ROMs that I used, it worked fine.
If you are still having issues you can use an app called Yalp that works like the play store.
I've used it on custom ROMs when the play store app refuses to work.
Yes, Oreo now.
I've put YALP on and that looks pretty good. I now seem to have most things working, and those that aren't I can probably live without.
I use a network tool called FING which reports my phone details, and I think it's incorrect but it's saying in one place it's a A2017U which I don't think is right. But now I am more comfortable with EDL and stuff I'm going to continue to fix this properly but the urgency is now not there. I was thinking if I couldn't fix this I might have to buy a new phone on black Friday!! So thanks for your help.
I'm still not really quite sure why I get Chinese characters at start up and what files I need to change to out a G firmware on, if that is what is wrong, and if it's do-able. I think if I knew how to do that then I could put on a G firmware and matching ROM and I'd be in business!!
The same page offered me F-DROID which seems to offer a whole load of different free apps. Maybe they don't have ads? Anyway I'll have a look.
Anyway, again - thanks!!
Geoff
Geoff I'm glad I could help
I was running the Chinese Oreo on my phone and after selecting English in setting some parts of the ROM were still in Chinese, even some notifications.
I converted to the A2017G Oreo update when it was released.
I miss some of the features in the Chinese ROM tho.
So... without wishing to prolong this... your phone was Chinese (as mine was) and you are now running a Global version and all you upgraded was the ROM? And are you able to use the Play Store and you don't have any issues running apps I - and can you run, say, Google Maps?). Is your bootloader still unlocked and if so is the menu at boot time still in Chinese?
Or have you upgraded something other than the ROM?
I actually have an Axon 7 A2017G here in Australia.
I soft bricked it when I accidentally made a mistake flashing a ROM.
I searched for a suitable stock firmware but I could only flash the Chinese Oreo Beta. It had to be modified to run on my device until the Oreo package for my A2017G had been uploaded.
I've now running the proper software for this phone.
Thanks.
Another couple of hours and I have made a Major breakthrough! I went back over all my notes and checked what i'd done and one thing I hadn't remembered doing was setting the Pay Store to Autorun. So using the Mi-Assistant I have done this, and most of the stuff which wasn't working now is. I am still working on why OK Google won't work, but the list of things I might have to live without is now quite short!! The one major benefit is that my battery life seems to be greatly increased. Boot time is also much quicker which is a bonus but not critical.
Nice, yes battery life is improved, actually the Chinese Oreo Beta has a better battery life than my current Oreo.
I could get up to 4 days out of the Chinese ROM, my current ROM can manage just over 3 days at best.
I have battery saver mode on but not ultra battery saver.
I hope this has been a good learning experience for you?
"I hope this has been a good learning experience for you?"
For sure it has. Back in the days when I was 3rd level computer techie, the best learning came from other experts and from being thrown in the deep end, rather than what they taught you in the classroom!
Long story short I'm working on loading a new (has not been used) LG V20 with Lineage OS and obviously have to pre-root the phone but I'm having problems and any help would be appreciated.
I'm currently working on trying to get DirtySanta working but in the command line when I run "run-as con" during ./step1.sh I get, "run-as: unknown package: con"
My questions are...
What am I missing?
Are there step by step instructions for completely re-loading these phones to LineageOS from factory to fully running?
The phone has the factory Android 8.0.0 and has NO data on it that needs to be saved. FastBoot is NOT working, I've tried many times.
Enable OEM unlock is not a option in the developer options on the phone.
Visseroth said:
Long story short I'm working on loading a new (has not been used) LG V20 with Lineage OS and obviously have to pre-root the phone but I'm having problems and any help would be appreciated.
I'm currently working on trying to get DirtySanta working but in the command line when I run "run-as con" during ./step1.sh I get, "run-as: unknown package: con"
My questions are...
What am I missing?
Are there step by step instructions for completely re-loading these phones to LineageOS from factory to fully running?
The phone has the factory Android 8.0.0 and has NO data on it that needs to be saved. FastBoot is NOT working, I've tried many times.
Enable OEM unlock is not a option in the developer options on the phone.
Click to expand...
Click to collapse
If you took the time to the dirty santa thread then you'd know that your phone's security patch date is date where ds has been patched, you need to be on a security patch date prior to Dec 2016
Sent from my LG-H910 using XDA Labs
Now I remember why I didn't post on these threads much. People just assUme that the posting person is a COMPLETE idiot.
This is a HELP forum where people come to get HELP and information, there's no reason to point fingers. A simple, "BTW that version you're running is a patched version, you'll need to roll it back to a prior, follow these links..." version would have done just fine.
With that I'd reply........
I realized I needed a older firmware last night when I was fighting with it for hours. I rolled it back to a firmware, dated 12-24-2016 and managed to get BadSanta to work but it caused my phone to go into a non-stop vibrate, it wouldn't complete boot and was basically bricked. I then found from another site that explained EXACTLY how to put the phone in download mode and then re-flashed the ROM (BTW, for those that don't know, you power off, hold the volume up and then plug in your data cable) but then put Android 7.0 Build number NRD90M.
The problem I am running into is everyone's information isn't is sync.
Some say how to proceed but don't say on what build number to proceed.
Some say to roll back to Android 7 Naugut but don't say which version because there are many versions of that version.
Personally I don't understand why a ROM can't be flashed via the download mode but then again I'm not a programmer.
So with that, after many hours I've made some progress but I am disappointed in how complicated and time consuming it is. I'm seriously considering a Pinephone for me and this phone (once completed) for my wife.
Right now I'm in the process of following this thread....
https://forum.xda-developers.com/v20/how-to/lgv20-vs995-verizon-aio-post-06-19-2017-t3624326
Later, after I get some work done.
Thanks for the reply though.
Well seems the BadSanta isn't working on my phone, as soon as I get past step3 and it reboots the screen is all scrambled and the vibrate motor runs continuously.
I've managed to get into TWRP once and followed the instructions but it bricks the phone at the LG startup screen.
Reloading the fastboot image doesn't do any good.
So seems I'm stuck with the stock firmware.
Can't say I didn't try.
Instructions I followed are here...
https://forum.xda-developers.com/v20/development/ls997vs995h910-dirtysanta-bootloader-t3519410
Visseroth said:
Well seems the BadSanta isn't working on my phone, as soon as I get past step3 and it reboots the screen is all scrambled and the vibrate motor runs continuously.
I've managed to get into TWRP once and followed the instructions but it bricks the phone at the LG startup screen.
Reloading the fastboot image doesn't do any good.
So seems I'm stuck with the stock firmware.
Can't say I didn't try.
Instructions I followed are here...
https://forum.xda-developers.com/v20/development/ls997vs995h910-dirtysanta-bootloader-t3519410
Click to expand...
Click to collapse
The vibration is normal if it's the VS995, which I'm sure you are using, right?
And the phone is not bricked, it's normal to see that warning at the start-up screen (about the device being corrupt....). Just be patient and give it time to boot.
The scrambled screen (static on boot) is also normal, just flash lineage 17.1, afaik it doesn't have static on the vs995
On a side note: double check the dirtysanta thread, you'll find most of these there
Really? I tried for many hours, multiple times and no go.
Yes it is the VS995, I guess I forgot to post that.
I did at one point get to a point where I could see a image behind all the garbled corruption on the screen and I did know that the corrupt notification was normal, that's how I made it to the TWRP once but I just couldn't get the screen fuzzy corruption to go away and the phone was still stuck vibrating non-stop.
Maybe I'm missing something?
And I only managed to get to the TWRP bootloader once.
Are all the features on the phone working on LineageOS 17.1?
I really wanted to get the phone not only up to date but limit the spying as much as possible with a device already designed to spy.
This phone is really for my wife, I'm thinking of ordering myself a PinePhone and giving that a whirl.
Visseroth said:
Really? I tried for many hours, multiple times and no go.
Yes it is the VS995, I guess I forgot to post that.
I did at one point get to a point where I could see a image behind all the garbled corruption on the screen and I did know that the corrupt notification was normal, that's how I made it to the TWRP once but I just couldn't get the screen fuzzy corruption to go away and the phone was still stuck vibrating non-stop.
Maybe I'm missing something?
And I only managed to get to the TWRP bootloader once.
Are all the features on the phone working on LineageOS 17.1?
I really wanted to get the phone not only up to date but limit the spying as much as possible with a device already designed to spy.
This phone is really for my wife, I'm thinking of ordering myself a PinePhone and giving that a whirl.
Click to expand...
Click to collapse
On stock, after it is done booting, press the power button once to turn off the main screen, then cover the upper left corner with your hand till the second screen turns off (abt 5 - 7 sec). Turn the screen back on and use your phone.
About lineage,