Database Users

My LG LS980 device is now bricked

I need big help, my LG LS980 device is now bricked currently works only in recovery mode with ADB commands, any firmware I tried to upload I did not succeed
adb devices
List of devices attached
03xxxxxxxxxxxx07 sideload
adb sideload aokp_ls980_kitkat_unofficial_2014-01-16. zip
sending 100%
on my screen devices
finding update package
Opening update package
Verifying update package
Installing update
assert failed: run_program ("/system/bin/loki.sh") == 0
Installation aborted.
I've tried other firmware that is supposed to my device with similar result
You may need to restore to stock firmware but I can't figure out the process.
Is there anyone who can help me to restore the device

follow steps to reroot and push loki to device, reinstall recovery. try install again.
before redownload different rom and try to install that, aokp is buggy rom anyway, latest 16th build doesnt boot .

bachera said:
follow steps to reroot and push loki to device, reinstall recovery. try install again.
before redownload different rom and try to install that, aokp is buggy rom anyway, latest 16th build doesnt boot .
Click to expand...
Click to collapse
Thanks for your reply, my problem is that I don't understand how do reroot the device.
The device does not have many options, pressing the buttons (power and Vol +) the device enters in a State Factory Hard Reset.
Pressing (power and Vol-) goes into recovery mode and loads the black screen with anticipation for the adb commands
reboot system now
update from external apply sdcard
apply update from cache
apply update from ADB
wipe data/factory reset
wipe cache partition
With closed then press the device (Vol +) and connect the USB cable enters into Download Mode, here you also don't know what to do.
When I hit the power button just opens the device showing the logo of LG and the led flashing in green/blue and after a while makes itself restarted
I searched the forum for reroot and saw that need to do some settings on the device to do root, did I forget something and so I do not understand?
Sorry, I don't understand and become tedious but it's my first time playing with the object

so, you dont have recovery now?
"adb reboot recovery" not working ?

Based on what you said, you are able to get in recovery and adb is working, then push the ROM zip file over and reflash it in recovery.

I'm happy because I just unbrick my device by selecting Download Mode Firmware Update and with the LGFlashTools loaded LS980ZV8_ software 13.51097. tot.
Now I lie in my original problem, I want to unlock to accept SIM card from another provider and another country.
Some help to be able to start from somewhere the unlock process?

id3210 said:
so, you dont have recovery now?
"adb reboot recovery" not working ?
Click to expand...
Click to collapse
Who not any command except devices-sideload-kill server-start server-reboot
any other command, I was giving "error close"
votinh said:
Based on what you said, you are able to get in recovery and adb is working, then push the ROM zip file over and reflash it in recovery.
Click to expand...
Click to collapse
to command push, I was giving "error close"
But all ok, unbrick my devices with LGFlashTools

Great!
Good to hear that.

I need help as well. My phone ls980 is bricked only works in recovery TWRP. Can someone please help me?

antbox12 said:
I need help as well. My phone ls980 is bricked only works in recovery TWRP. Can someone please help me?
Click to expand...
Click to collapse
Did you accidentally accept that update too?
Sent from my SM-N900P using Tapatalk

natefuhr said:
Did you accidentally accept that update too?
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
No but I fixed it. I had to put it in download mode and flash the stock rom back to it.

[Root any Moto G] with screenshots [Simple Method|Well Explained]

Hi...
This is the tutorial to root any Moto G
To root any Moto G, three basic steps need to be followed... you can either do them manually or use a tool do them for you. It is advised to follow them manually so that if there's some bug in the tool you don't get into any trouble.
CAUTION - You will lose all data and files so better back them up.
For Google Play edition devices, the process is same and only the recovery.img file is different. For GPe CWM Advanced Edition recovery go here https://goo.im/devs/philz_touch/CWM_Advanced_Edition/ and select falcon_gpe and download the latest one.
For AT&T and Verizon models don't do anything written above. Just download the Towelroot app. Its a one click root app and doesn't require a PC. Itis trustworthy but is not guaranteed to work but you must give it a try since it won't do any harm and claims of never bricking a phone. Please reply with the result and your android and kernel version.It will probably not work on phones build after June 3 but you can give it a try. You can download it from the website https://towelroot.com
The three steps are :-
1) UNLOCKING THE BOOTLOADER
2) FLASHING CUSTOM RECOVERY
3) INSTALLING SuperSu.zip FILE THROUGH RECOVERY. (SuperSu is acknowledge as the best app to give superuser and root rights)
UNLOCKING THE BOOT LOADER - The instructions to unlock the boot loader are given in the official Motorola website here https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a . Don't be scared by their warnings.
UPDATE - There currently seems to be an issue with unlocking the bootloader on devices running 4.4.4 though it works for 4.4.2. The issue is with Motorola and is that, the unlock code given by the company is showing an error. They are fixing it and it may take some time though you can give it a try as it won't do any harm. Or you can downgrade the boot loader to 4.4.2 and then unlock it.
As confirmed by the Motorola agent, the problem of unlocking bootloader on 4.4.4 has been fixed
FLASHING CUSTOM RECOVERY :-
To flash a custom recovery, you need these things
1) PC and a USB data cable
2) Android SDK ( developer.android.com/sdk/index.html ) For flashing recovery only SDK is needed but it's your wish if you want to download the ADT bundle. After downloading and unzipping the sdk , open the SDK manager and download only the platform tools for this.. rest is your wish..... and separately download ADB tools and fastboot and extract them minimal-adb-and-fastboot.software.informer.com/1.1/
3) Recovery.img file - You can either use CWM foum.xda-developers.com/showthread.php?t=2563599 or CWM advanced editionforum.xda-developers.com/showthread.php?t=2639583 or TWRP forum.xda-developers.com/showthread.php?t=2561757. EDIT - If your phone had come pre installed with 4.4.4 then use only CWM Advanced Edition. CWM Advanced Edition doesn't make backup on XT1033
4) Motorola drivers https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/97326/p/30,6720,9050
5) Enable USB Debugging mode in your phone by going to Settings-About Phone and then tap the build number until you get the toast 'You are a developer'. Now go to Settings again and you will see a new Developer Options there. Go there and enable USB debugging.
6) Have at least 25% of charge on your phone.
After getting all these things:-
1) Download the recovery.img file to your PC and copy paste it to android SDK/platform tools folder.
2) Boot your phone to fastboot mode by first switching it off and holding the volume down and power button for 3 seconds.
3) When in fastboot mode, connect your phone to pc, go to the platform tools folder, there pres shifft and right mouse click simultaneously and select 'open command prompt window here'.
4) In the command window enter
Code:
fastboot devices
If it shows a number and fastboot then we are good..
5) Then enter
Code:
fastboot flash recovery recovery.img
( where in recovery.img the recovery is the name of your recovery file. Example if the name of recovery file is ABC then enter fastboot flash recovery ABC.img)
5) Press enter and if the command prompt window displays the message okay then the recovery is successfully flashed.
6) Now just boot your phone to recovery mode through fastboot mode by following the on screen instructions and in recovery mode select Reboot System Now to reboot your phone normally.
(see attached images below for screenshots)
INSTALLING SuperSu
To install SuperSu :-
1) Download SuperSu zip file download.chainfire.eu/452/SuperSU/ and transfer it to your phone
2) Reboot to recovery via fastboot.
3) Select install zip and select choose from SD card.
4) Locate the file and install it.
5) Now reboot your phone.
YUP.. YOU ROOTED YOUR PHONE!
Download any root checker app from the Play Store to check whether your phone is rooted or not.
If you get into any trouble, please contact and don't forget to hit thanks if it helped
Consider rating the thread by going to the option 'rate thread' which is located above the thread on the right side. You can also participate in the poll

I have a huawei p6 but I'm absolutely not satisfied with that and I bought a moto g for my girlfriend and that is awesome.
The only thing why I haven't bought the g for myself as well is the rooting. That time I didn't find an easy way to root it.
If it is a working method than I will buy the 4g verson with sd card support
Sent from my HUAWEI P6-U06 using XDA Free mobile app

sisqoboy said:
I have a huawei p6 but I'm absolutely not satisfied with that and I bought a moto g for my girlfriend and that is awesome.
The only thing why I haven't bought the g for myself as well is the rooting. That time I didn't find an easy way to root it.
If it is a working method than I will buy the 4g verson with sd card support
Sent from my HUAWEI P6-U06 using XDA Free mobile app
Click to expand...
Click to collapse
Yup dude...this works for sure..!
I also added screenshots.. check them out.

Meuuks13 said:
Yup dude...this works for sure..!
Click to expand...
Click to collapse
Does this work with the latest bootloader on 4.4.4? Im still stock but i wanna root it so much
Thanks

motocruiser said:
Does this work with the latest bootloader on 4.4.4? Im still stock but i wanna root it so much
Thanks
Click to expand...
Click to collapse
I looked into it just now... Currently there's an issue with Motorola with unlocking the bootloader when on 4.4.4...As people say, the unlock code given my Motorola is showing an error... You can still try it.. maybe it's even fixed by now.. Even if it fails there wouldn't be any harm.. Though the unlocking works fine with 4.4.2... You can revert back to 4.4.2, unlock the bootloader and then update to 4.4.4... The thing will be same as you will lose all data and files when unlocking the bootloader and so in reverting to 4.4.2.....(Remember, only unlocking doesn't mean you won't recieve updates, you won't receive updates only if you flash a custom recovery.)
EDIT - I added it to the OP. Thanks for bringing it to attention.

And does this work for Verizon model
Sent from my XT1028 using XDA Premium 4 mobile app

xrilex said:
And does this work for Verizon model
Sent from my XT1028 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You have Verizon I see. The only you will probably face is unlocking the bootloader.. Oh, wait first let me laugh... lol...OK....At one point of time you couldn't unlock the bootloaders for AT&T and Verizon and then we were blessed by the 'one click root' app by the famous hacker geohot called TowelRoot. This app claims to root all the AT&T and Verizon devices with just a click. You don't even need a PC. Just download the app and in the app chick 'make it rain'. Though this is not guaranteed to work but must give a try as it won't do any harm but there's a chance of bricking the phone but you can easily recover from a soft brick by flashing the stock firmware.
Towelroot - https://towelroot.com/
P.S. - Please reply if you tried this and if it didn't work reply with your android version and kernel version. Well reply with your android version and kernel version anyway.
Edit- I added it to the OP

Meuuks13 said:
I looked into it just now... Currently there's an issue with Motorola with unlocking the bootloader when on 4.4.4...As people say, the unlock code given my Motorola is showing an error... You can still try it.. maybe it's even fixed by now.. Even if it fails there wouldn't be any harm.. Though the unlocking works fine with 4.4.2... You can revert back to 4.4.2, unlock the bootloader and then update to 4.4.4... The thing will be same as you will lose all data and files when unlocking the bootloader and so in reverting to 4.4.2.....(Remember, only unlocking doesn't mean you won't recieve updates, you won't receive updates only if you flash a custom recovery.)
EDIT - I added it to the OP. Thanks for bringing it to attention.
Click to expand...
Click to collapse
thanks for your help dude but i heared that if you flash back to 4.4.2 your bootloader is still the latest so its still unlockable...
i have found a fix on a motorola customer forum for this problem, but when i flash this testdrive motoboot image file it goes wrong and i cant fix it by my self

motocruiser said:
thanks for your help dude but i heared that if you flash back to 4.4.2 your bootloader is still the latest so its still unlockable...
i have found a fix on a motorola customer forum for this problem, but when i flash this testdrive motoboot image file it goes wrong and i cant fix it by my self
Click to expand...
Click to collapse
Sorry I didn't know that. Downgrading the bootloader is a very risky process.
What did you exactly do?

Hey! I have followed all the steps. When i flash de recovery.img, the command prompt says everything is ok, but when i try to reboot into recovery trough the fastboot, it just turns off! It dosn't rebot into recovery! Thanks man!

t.lou91 said:
Hey! I have followed all the steps. When i flash de recovery.img, the command prompt says everything is ok, but when i try to reboot into recovery trough the fastboot, it just turns off! It dosn't rebot into recovery! Thanks man!
Click to expand...
Click to collapse
Please tell which android version your phone came preinstalled with and what recovery you used.
Also when you reboot to recovery, after the blank screen do you see the android logo lying down with a red triangle?

t.lou91 said:
Hey! I have followed all the steps. When i flash de recovery.img, the command prompt says everything is ok, but when i try to reboot into recovery trough the fastboot, it just turns off! It dosn't rebot into recovery! Thanks man!
Click to expand...
Click to collapse
Please tell your phone's android version and the recovery you used and what did you enter at the command prompt?

Meuuks13 said:
Sorry I didn't know that. Downgrading the bootloader is a very risky process.
What did you exactly do?
Click to expand...
Click to collapse
Well it doesnt go wrong like you think so my phone is actually not bricked.
But the command window says that the operation failed so i think something is wrong with this testdrive image from the moto forum.
thanks

motocruiser said:
Well it doesnt go wrong like you think so my phone is actually not bricked.
But the command window says that the operation failed so i think something is wrong with this testdrive image from the moto forum.
thanks
Click to expand...
Click to collapse
Testdrive image?

Meuuks13 said:
Testdrive image?
Click to expand...
Click to collapse
Yeah they say, if you on 4.4.4 and want to unlock your bootloader you have to flash the motoboot_testdrive.img file wich downgrades the bootloader to i think it was called 40.15 or so after that you have to unlock your bootloader and then flash the motoboot 4.4.4 stock image so that you have the actual one but for me it failed while i try to flash this testdrive image

motocruiser said:
Yeah they say, if you on 4.4.4 and want to unlock your bootloader you have to flash the motoboot_testdrive.img file wich downgrades the bootloader to i think it was called 40.15 or so after that you have to unlock your bootloader and then flash the motoboot 4.4.4 stock image so that you have the actual one but for me it failed while i try to flash this testdrive image
Click to expand...
Click to collapse
So basically you want to downgrade the bootloader and then unlock it?
Well if you are on KitKat you can downgrade the bootloader by flashing 4.3 , then unlocking the bootloader and then updating to KitKat

Thanks for the guide. I've already recommended it to someone who was having problems.

jselene said:
Thanks for the guide. I've already recommended it to someone who was having problems.
Click to expand...
Click to collapse
Cool.

Thanks Meuuks13. This worked well.
Also, I've found that you can remove the "unlocked bootloader warning message" shown on boot-up by following the method in the Moto X forum:
http://forum.xda-developers.com/moto-x/general/4-4-3-remove-unlocked-bootloader-message-t2548566

JDCGW said:
Thanks Meuuks13. This worked well.
Also, I've found that you can remove the "unlocked bootloader warning message" shown on boot-up by following the method in the Moto X forum:
http://forum.xda-developers.com/moto-x/general/4-4-3-remove-unlocked-bootloader-message-t2548566
Click to expand...
Click to collapse
I got something wayyyy better than that!
I let you remove that sign and use the pics given here forum.xda-developers.com/moto-g/themes-apps/shareboot-logos-t2875147 or you can give me the pic you want and I will make it in such a way that you can use it.

Need TWRP Backup of UK version, a2017g

Hi,
I rooted my ZTE Axon 7 UK version, A2017G and i accidentally formatted the system, currently i have the US version of the software running but i dont have any WIFI
thanks for the help in advance

Can't help you with the European system
But have you tried flashing B20 boot.img from tenfar tool ? Might solve your wifi issue...
If that works, it's awesome !

shia786 said:
Hi,
I rooted my ZTE Axon 7 UK version, A2017G and i accidentally formatted the system, currently i have the US version of the software running but i dont have any WIFI
thanks for the help in advance
Click to expand...
Click to collapse
djona12 said:
Can't help you with the European system
But have you tried flashing B20 boot.img from tenfar tool ? Might solve your wifi issue...
If that works, it's awesome !
Click to expand...
Click to collapse
the A2017G have a FULL FACTORY UPDATE IMAGE (B02) you guys are actually lucky in that department, us A2017U we wish had one.
here : http://forum.xda-developers.com/axon-7/how-to/a2017g-b02-update-released-europe-t3440619

i cannot seem to find tenfar tool anywhere
DrakenFX said:
the A2017G have a FULL FACTORY UPDATE IMAGE (B02) you guys are actually lucky in that department, us A2017U we wish had one.
here : http://forum.xda-developers.com/axon-7/how-to/a2017g-b02-update-released-europe-t3440619
Click to expand...
Click to collapse

i have found the tool but i think i flashed the US version of the boot image now my phone does not boot up at all,
it goes to stock recovery
if i turn the phone on then it goes to ZTE LOGO for about half a second then the screen goes blank
i can access fastboot but only through stock recovery which when i go to bootloader i cannot run any fastboot commands, even if i run fastboot reboot it does not reboot the phone at all
shia786 said:
i cannot seem to find tenfar tool anywhere
Click to expand...
Click to collapse

Got the same problem, i've formatted the system and now i can only go to the stock recovery, i can't reboot to edl mode by pressing both volume buttons doing this a Handset Diagnostic Interface (DFU) appears in my Device Manager instead of Qualcomm USB device, so i can't install a TWRP.

shia786 said:
i cannot seem to find tenfar tool anywhere
Click to expand...
Click to collapse
Cricius said:
Got the same problem, i've formatted the system and now i can only go to the stock recovery, i can't reboot to edl mode by pressing both volume buttons doing this a Handset Diagnostic Interface (DFU) appears in my Device Manager instead of Qualcomm USB device, so i can't install a TWRP.
Click to expand...
Click to collapse
As I said before, YOU GUYS have full update file posted the link (thread) about... You DON'T need @tenfar tools to use the FULL A2017G update (B02) , download the file (like 2.2gb I guess) and flashed using stock recovery.

DrakenFX said:
As I said before, YOU GUYS have full update file posted the link (thread) about... You DON'T need @tenfar tools to use the FULL A2017G update (B02) , download the file (like 2.2gb I guess) and flashed using stock recovery.
Click to expand...
Click to collapse
When I press update from SD card it comes up with cannot update from SD card, when I try to do ADB side load and says cannot read file

shia786 said:
When I press update from SD card it comes up with cannot update from SD card, when I try to do ADB side load and says cannot read file
Click to expand...
Click to collapse
Try enable " OEM Unlocking " under developers option and try again

DrakenFX said:
Try enable " OEM Unlocking " under developers option and try again
Click to expand...
Click to collapse
I cannot access the software at all, all I got is stock recovery

shia786 said:
I cannot access the software at all, all I got is stock recovery
Click to expand...
Click to collapse
Try using that same full update with twrp,
As title said you can boot only to TWRP? From there you may be able to flash the zip.

DrakenFX said:
Try using that same full update with twrp,
As title said you can boot only to TWRP? From there you may be able to flash the zip.
Click to expand...
Click to collapse
I no longer have access to TWRP recovery as I flashed stock recovery to install the firmware file using stock recovery but somehow the os got screwed up and now the only thing I have access to is stock recovery

shia786 said:
I no longer have access to TWRP recovery as I flashed stock recovery to install the firmware file using stock recovery but somehow the os got screwed up and now the only thing I have access to is stock recovery
Click to expand...
Click to collapse
You can just boot into TWRP using tenfar tools and Flash the zip.

DrakenFX said:
You can just boot into TWRP using tenfar tools and Flash the zip.
Click to expand...
Click to collapse
For me to use the tool I need to access the phone in edl mode which I cannot do because I do not have access to ADB

shia786 said:
For me to use the tool I need to access the phone in edl mode which I cannot do because I do not have access to ADB
Click to expand...
Click to collapse
and not having access to adb, you meant don't have a PC/Laptop?
Cuz there is an alternative way how to boot to " edl "
- turn your phone completely off
- press and hold Volume DOWN & UP
- plug your device to your PC/Laptop

DrakenFX said:
and not having access to adb, you meant don't have a PC/Laptop?
Cuz there is an alternative way how to boot to " edl "
- turn your phone completely off
- press and hold Volume DOWN & UP
- plug your device to your PC/Laptop
Click to expand...
Click to collapse
so what i mean by i cannot access ADB is that the phone has stock recovery in which there is no ADB functionality, i cannot access the OS so i cannot use ADB that way either,
i tried the method above to go into edl mode but it just goes onto a black screen where the led light flashed red and green and the computer does not recognise anything being plugged in, not even the system sound,
I have the correct drivers installed as i used his before when the OS was working

shia786 said:
so what i mean by i cannot access ADB is that the phone has stock recovery in which there is no ADB functionality, i cannot access the OS so i cannot use ADB that way either,
i tried the method above to go into edl mode but it just goes onto a black screen where the led light flashed red and green and the computer does not recognise anything being plugged in, not even the system sound,
I have the correct drivers installed as i used his before when the OS was working
Click to expand...
Click to collapse
Hi,
I have the exact same issue
Did you find a way to get your phone booting again ?

DrakenFX said:
and not having access to adb, you meant don't have a PC/Laptop?
Cuz there is an alternative way how to boot to " edl "
- turn your phone completely off
- press and hold Volume DOWN & UP
- plug your device to your PC/Laptop
Click to expand...
Click to collapse
That doesn't work on the A2017G, you have to use "adb reboot edl", so you see the problem. Also, the A2017G doesn't actually have an EDL mode but something very similar that's ZTE call Handset diagnostic Interface - quite why, who knows, this is ZTE after all...

Why I can't unlock the bootloader??

Hello guys, its making me crazy, I've downloaded all the software that required, LG G6 Driver,platform-tools-latest-windows...
Once I type adb reboot bootloader, it says no devices/emulators found
I have laggy on the device, so I want to install fulmics rom into it. PLZ HELP:crying::crying::crying:

Fulmics is not going to help your laggy.

What model phone?
Did you follow instructions from here or another place? https://forum.xda-developers.com/lg-g6/how-to/official-lg-g6-bootloader-unlock-t3614719

Aid777 said:
What model phone?
Did you follow instructions from here or another place? https://forum.xda-developers.com/lg-g6/how-to/official-lg-g6-bootloader-unlock-t3614719
Click to expand...
Click to collapse
Bro, I did unlock it, it was driver issues but now I have a big problem... I've flash the lastest twrp, but when I boot into the recovery mode, theres a dead android and said no command... what happend...:crying::crying::crying:

No idea, but you could try to flash the latest .kdz file using LGUP and Uppercut if you can get into download mode and then just start everything again

ZkPro1991 said:
Bro, I did unlock it, it was driver issues but now I have a big problem... I've flash the lastest twrp, but when I boot into the recovery mode, theres a dead android and said no command... what happend...:crying::crying::crying:
Click to expand...
Click to collapse
When you boot into recovery hit the volume up button to enter recovery mode
Sent from my ONEPLUS A3000 using Tapatalk

phone dead(nothing is appear)

i m flash stock rom using cmd. and after flash complete phone continue restarting and nothing is appear.
nothing means nothing
but screen seems to wake but nothing appear
plz help
here is the link is i used for flashing
https://www.youtube.com/watch?v=AQgrzquizPY
help me

Download twrp flashable rom by avinash on xda...
Flash it via twrp...
Post your questions in qna section..
Not here

Are you able to go in twrp recovery?

Till which step did you reach? What waa the last message you saw on screen?
Charge it for a day, then press vol + button and power button and see if you can get to fast boot. Try plugging USB in and see if it's recognised, otherwise.

axit50 said:
Are you able to go in twrp recovery?
Click to expand...
Click to collapse
no i m not able to boot twrp display is blank
but sound is working with power button

nileshgarva said:
no i m not able to boot twrp display is blank
but sound is working with power button
Click to expand...
Click to collapse
Can you go to fastboot mode?

axit50 said:
Can you go to fastboot mode?
Click to expand...
Click to collapse
yes i able to fastboot mode and also command prompt fastboot devices shows my device
and i found one firmware for my device . is it correct(http://dlcdnet.asus.com/pub/ASUS/Ze...503.1214684087.1525078252-95537950.1525078252)
and behind my devices. made in Indonesia. written.
if you have correct firmware file name or link . please provide me.]
i also flashed fastboot firmware whick is from ( https://forum.xda-developers.com/as...ow-to/guide-revert-to-stock-rom-lock-t3798420 )
thank you

nileshgarva said:
yes i able to fastboot mode and also command prompt fastboot devices shows my device
and i found one firmware for my device . is it correct(http://dlcdnet.asus.com/pub/ASUS/Ze...03.1214684087.1525078252-95537950.1525078252)
and behind my devices. made in Indonesia. written.
if you have correct firmware file name or link . please provide me.]
i also flashed fastboot firmware whick is from ( https://forum.xda-developers.com/as...ow-to/guide-revert-to-stock-rom-lock-t3798420 )
thank you
Click to expand...
Click to collapse
From fastboot mode, install TWRP recovery first

Try alternate TWRP Recovery provided in this forum

nileshgarva said:
yes i able to fastboot mode and also command prompt fastboot devices shows my device
and i found one firmware for my device . is it correct(http://dlcdnet.asus.com/pub/ASUS/Ze...03.1214684087.1525078252-95537950.1525078252)
and behind my devices. made in Indonesia. written.
if you have correct firmware file name or link . please provide me.]
i also flashed fastboot firmware whick is from ( https://forum.xda-developers.com/as...ow-to/guide-revert-to-stock-rom-lock-t3798420 )
thank you
Click to expand...
Click to collapse
If you want to go on stock ROM with root.. I can give you the link but if you want to relock the bootloader.. then it's very lengthy process..

axit50 said:
If you want to go on stock ROM with root.. I can give you the link but if you want to relock the bootloader.. then it's very lengthy process..
Click to expand...
Click to collapse
The last link in his comment will give him stock rom with locked bootlkader via the fastboot method.
As the OP has already tried maybe his only option is the one you give him the link to

akshmau5 said:
The last link in his comment will give him stock rom with locked bootlkader via the fastboot method.
As the OP has already tried maybe his only option is the one you give him the link to
Click to expand...
Click to collapse
My link will give him stock rom but he has to flash it from twrp so I can't help him

drive.google:laugh:com/file/d/1FrDUoDaItrQPC6DiU6oRx1wOwY-SraUp/view?fbclid=IwAR38SHuQWyg2x7lfwbeBqvvpEm8QAcpke3gwqTMaxHICLkEULJHRpPcw9W8 (replace the emoticon with period)
That's the link for fastboot flashable rom v323. It will surely revive your max pro. (Credits to Nageen Pawar. Thanks sir)
Boot your phone into fastboot first. Connect it to your pc. Make sure you already installed adb drivers. Then extract the downloaded rom. And finally, run flash_all.

axit50 said:
My link will give him stock rom but he has to flash it from twrp so I can't help him
Click to expand...
Click to collapse
Why to flash twrp. Flash stock recovery via fastboot command. Download stock rom, put it in to internal storage. Now boot in to recovery. Update phone from there. This method will work.

Kumarvicky12 said:
Why to flash twrp. Flash stock recovery via fastboot command. Download stock rom, put it in to internal storage. Now boot in to recovery. Update phone from there. This method will work.
Click to expand...
Click to collapse
Because from TWRP he can flash stock ROM(modded) which may help him

axit50 said:
Because from TWRP he can flash stock ROM(modded) which may help him
Click to expand...
Click to collapse
From stock rom also he can make his phone alive/ working.

But from TWRP it's a better option to check.. because his phone is broken when he tried to unroot and reinstall stock rom

i too got same help me from that nothing is displaying and sounds were coming from that i too flashed the same rom help me to get out of this
...?