Very unique problem, boots but cant get into recovery - Blade General

I have ZTE Blade 3 Pro
Phone turns on normally and works.
But I can't enter recovery mode in order to reset the phone and/or flash firmware.
What happens is after holding the button combination green android logo shows up and just hands there.
Anyone knows how can I enter recovery mode ?

Related

I think I bricked my ZTE Blade C2 v809

Please help me. I am in a sort of panic right now.
I have a ZTE Blade C2 v809, sold here in Portugal as Meo Smart A12. It was rooted and working fine. I was however getting some error 24's trying to install apps. I thought this might have had to do with using Titanium Backup to remove TouchPal (I did make a backup first), so I decided to restore TouchPal. There were however some errors in the restore and it was stuck there, so I decided to reboot the phone.
Chaos. Now it wont boot. If I press the button normally, the phone boots, I see the android logo, the screen goes black (Not shutdown black, a sort of light black background) and nothing happens. If I try to boot into Recovery mode by holding the power button and the volume down key, I just get the android logo stuck there, nothing happens. If I hold the power button and the volume up key, I get the picture of that laying down android with the message error.
Any more info I must provide please tell me, I am desperate for a solution, If I lose this phone I wont be able to get another one.
Okay I fixed it. Turns out the recovery menu DID work if I waited for a long time and tapped the screen. Used the update.zip available from the site, and it works like a charm
Yay, I bricked my phone, too.
I did something similar, changed recovery-from-boot.p name to recovery-from-boot.p-bak and install-recovery.sh to install-recovery.sh-bak
Now the phone doesn't boot properly, in fact it's stuck in a boot loop:
>starts
>shows white ZTE logo on screen
>restarts
Tried connecting the phone via USB cable and used fastboot devices & adb devices commands, no devices found.
Also tried pressing "power + vol down" and "power + vol up", nothing. I can't enter recovery mode or bootloader.
Apparently the remaining way to get in it's trough the SD slot, or maybe there's another way.
I kindly ask for help, couldn't be possible that I ruined this cell phone so fast.
Ideas, somebody?

LG D802/G2 cannot enter recovery mode at all

Hello
I am having some trouble with my LG D802 i been trying to recover phone but it refuses to enter recovery mode, the phone does show lg logo so phone isnt dead but i cannot enter recovery mode no matter what i do i pressed power and volume down until lg logo was displayed then i let go and pressed them both again but nothing happens lg logo appears again and phone goes black again no recovery page, has anyone an idea what coukd cause this as its very frustration and i need to recover phone urgently
graemek said:
Hello
I am having some trouble with my LG D802 i been trying to recover phone but it refuses to enter recovery mode, the phone does show lg logo so phone isnt dead but i cannot enter recovery mode no matter what i do i pressed power and volume down until lg logo was displayed then i let go and pressed them both again but nothing happens lg logo appears again and phone goes black again no recovery page, has anyone an idea what coukd cause this as its very frustration and i need to recover phone urgently
Click to expand...
Click to collapse
does it boot into system? not .
you tried all different ways pressing the keys.?
you may need to use skr tools to install twrp..
Try press Volume Up + Volume Down after the LG logo appears (this must happen only if you first press Power + Volume Down to power on the phone and get the LG logo)
raptorddd said:
does it boot into system? not .
you tried all different ways pressing the keys.?
you may need to use skr tools to install twrp..
Click to expand...
Click to collapse
The phone boots up but keeps rebooting itself which is why i was going to factory reset it i have tried all conbinations cant enter downlod mode either and usb debugging isnt enabled so i cant use skr tools but its original rom also

Huawei Y625-U21 how to flash by USB without turning device on

Hi guys,
I can not turn on my huawei y625-u21. When i am trying to switch it on, phone freezes on huawei logo (first screen which is shown on start - probably called boot screen). I am not able run also recovery mode (vol+) or update mode (vol+ and vol-), so i am not able to perform update of firmware from sd card. Is there any other way to to perform update (flash) of firmware on device, which is not turned on? I have read something about twrp flash, but if i am not wrong, device should be switched on before this process. I would like to install new firmwere, to check, if phone has hardware or software defect.
to put it into recovery mode, you need to hold volume up button and power button, once the huawei logo appears, release power button but keep holding volume up, after about 30 - 45 seconds, it will boot into recovery mode. i have had this issue over and over and i've had to discover this method myself after trying all methods i found, you can reach me on [email protected] in case you need anything else. if it fails to boot into recovery, just remove the battery for a few seconds and insert then try again. i have this very model of phone too.

Psm-p900 not booting into recovery mode

Hi,
Have this old thing, and charged it up after years, and am trying to get into it, but realized I had a lock screen
and password I can't remember
So I'm trying to get into recovery to restore it to default, but when holding Home+Volume up + Power it boots to this screen
and not recovery. I am pretty sure I haven't moded the boot loader and firmware
Anyone know how to get into the recovery? or any other way to get past the lock screen?
In doing some research, that is the download mode. But someone else had the same problem and instead of holding the Volume Up, the Held the volume down on a Galaxy Tab and it worked.
When I try Volume down, If I keep the buttons held, it goes in a loop. And if I release them when I see the logo, it boots into a black screen powered on, but no menu shows up
if the recovery is incorrect for the device (wrong model) it'll send you straight to that screen.
solved by flashing one for the model you have.

Boot Looped

Hello! Here is my story:
I had a rooted stock os where i just changed the boot anim and everything was fine. I rebooted my device yesterday , the boot anim was fine etc. until today. When i rebooted my phone today , it booted into download mode with no reason. I didnt do any crap on it and it was fine until today. When i was in download mode i remembered i had a custom rom on my sd card so i wanted to flash twrp. I flashed it without factory reset and it didnt work. Now im stuck in a boot loop and i tried entering recovery but doesnt work.
Ok so i saw you can enter download mode with some key combo but u need the home button which this phone doesnt have (on screen controls).
Is there a way i can go in download mode and flash stock firmware with odin or unbrick the phone?
Enter Download Mode : Turn Power Off. Press and hold Volume Up key + Power Key, When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears.
I managed to find this method a long time ago so its fixed. Thanks for responding doe.

Categories

Resources