Database Users

Miui Alpha

*****************
***Miui Alpha***
*****************​*Mother Of Tweaked*
*Simple And Beautiful Interface*​
*Latest version miui
*Fully experience miui 6
*full rom
*Bug Free
*Both sim 3g
*Prestigio Keyboard
*Screen on off animation
*Wsm tools
*No chinese apps
*Pre-rooted
*Miui paid themes free download
*New bootanimation
*Size 349 mb
*Unlock phone using volume buttons
*Better battery backup any miui rom
*Otg Working
*Flipcaver Lock Working
*And Many More​
*Installation :
*Copy zip file Sd Card
*Reboot into recovery
*Wipe data/factory reset
*Wipe cache partition
*Wipe dalvike cache
*Wipe system
*Select zip from SD card and install
*wipe cache&and dalvike reboot&enjoy
*Caution: I am NOT responsible for any damage caused to your device. Flash at your own Risk!
​​*Download Link
​
https://drive.google.com/file/d/0B5KBP3GG99Q2TTVpVTRpdU1kclU/view?usp=sharing
​
*HIT THANKS IF YOU LIKE THE ROM.....................​
*Credit:-hollydenis​​
*Q1. How to enable root
*Ans. Go to the security app open it and then open Permission then click on the Root permission check box​​

how to network bar left side
open wsm tools install fremwork and install tick all module and restart open setting custom function status bar and set

[OFFICIAL][PATCHER][APP] Dual Boot Patcher For Redmi 4x

Finally Builded Dual Boot Patcher For Redmi 4x With All Fixes.
Now DBP is official for Redmi 4x
Note:- Redmi 4x/4(India) both are same.
Note:-I AM NOT RESPONSIBLE IF ANYTHING HAPPENS TO YOUR DEVICE.USE AT YOUR OWN RISK.THIS IS PERSONALLY TESTED BY ME SO IT SHOULD NOT CREATE ANY PROBLEM IF YOU FOLLOW THE STEPS ABOVE PROPERLY
ENJOY
The Requirement:
1- TWRP Latest[Recommended] ==> TWRP For Santoni
2- Decrypted Data ==> (Format Data)(Important Step or Else Rom will not boot and it will wipe internal storage so take a backup)
3- Magisk or Supersu (I used Magisk)
The Installation Steps:
1- Install the latest DBP from here ==> Dual Boot Patcher
(As this build is debug it will create another app name 'Leaks' so dont uninstall it will also uninstall DBP app)
2- Go to Settings ==>Installed apps==>All==>Documents==>Enable
3- Go to app and click on ROMs and grant it a root access.
4- Click yes to update the "Primary Kernel"
5- Go to "Patch Zip File"
6- Click on "Add flashable zip"
7- Choose the required ROM such as "YurekaOS"
8- Click "OPEN"
9- Under partition configuration choose "Data slot/Ext slot/secondary(if have enough space)"
10- Enter and ID as "Yureka or any name you like"
11- Click on "Continue"
12- Click on "SAVE"
13- Click on "Right Mark" to patch the zip file
14- Wait till the operation to finish
15- Go to "ROMs"
16- Click on "Add patched file" to flash it
17- Click on "Keep the current location"
18- Flash and wait till the operation to finish
19- Go to "ROMs" to make sure that the new second ROM is added
20- Now close the app and re-open it for refreshing
21- Adding the "Gapps Package"
22- Go to "Patch Zip File"
23- Click on "Add flashable zip"
24- Choose the required any gapps package
25- Click "OPEN"
26- Check and make sure that the ID in step 10 "Yureka or any name you like" is appeared as "Yureka or any name you like (Data slot)"
27- Repeat the steps from 11 to 18
28- Reboot
29- Install the DBP again
30- Choose the primary ROM and reboot
31- To install boot ui==>Go to settings==>click on install boot ui (it will give you option to boot to which rom on every reboot)(This step is optional)(in order to use 'boot ui' update ramsdisk of both rom)
About Partitons:
data-slot = internal storage (can be used)(recommended)
Extsd-slot = external sd card (can be used)
Primary= System Partition ( No use )
Secondary = System Partition (Only can be used if much of sytem space left)
Multi-slots = cache partition ( No use )​
What's Working:
Everything
What are not Working:
Tell me
Special thanks to:
@chenxiaolong for such an beautiful open source project
@dg28gadhavi (For guiding me the basics and helping in every manner he can)
Contributors
Nik001, dg28gadhavi, chenxiaolong
Official XDA Thread: Official Thread
Official Sources Code:https://github.com/chenxiaolong/DualBootPatcher
Sources Code:https://github.com/Nikesh001/DualBootPatcher
Plz give a thumbs up to the thread if you all like it:good:
HAPPY DUALBOOTING:good:

Nik001 said:
Finally Builded Dual Boot Patcher For Redmi 4x With All Fixes.
Note:- Redmi 4x/4(India) both are same.
Note:-I AM NOT RESPONSIBLE IF ANYTHING HAPPENS TO YOUR DEVICE.USE AT YOUR OWN RISK.THIS IS PERSONALLY TESTED BY ME SO IT SHOULD NOT CREATE ANY PROBLEM IF YOU FOLLOW THE STEPS ABOVE PROPERLY
ENJOY
The Requirement:
1- TWRP Latest[Recommended] ==> TWRP For Santoni
2- Decrypted Data ==> (Format Data)(Important Step or Else Rom will not boot and it will wipe internal storage so take a backup)
3- Magisk or Supersu (I used Magisk)
The Installation Steps:
1- Install the latest DBP from here ==> Dual Boot Patcher
(As this build is debug it will create another app name 'Leaks' so dont uninstall it will also uninstall DBP app)
2- Go to Settings ==>Installed apps==>All==>Documents==>Enable
3- Go to app and click on ROMs and grant it a root access.
4- Click yes to update the "Primary Kernel"
5- Go to "Patch Zip File"
6- Click on "Add flashable zip"
7- Choose the required ROM such as "YurekaOS"
8- Click "OPEN"
9- Under partition configuration choose "Data slot/Ext slot/secondary(if have enough space)"
10- Enter and ID as "Yureka or any name you like"
11- Click on "Continue"
12- Click on "SAVE"
13- Click on "Right Mark" to patch the zip file
14- Wait till the operation to finish
15- Go to "ROMs"
16- Click on "Add patched file" to flash it
17- Click on "Keep the current location"
18- Flash and wait till the operation to finish
19- Go to "ROMs" to make sure that the new second ROM is added
20- Now close the app and re-open it for refreshing
21- Adding the "Gapps Package"
22- Go to "Patch Zip File"
23- Click on "Add flashable zip"
24- Choose the required any gapps package
25- Click "OPEN"
26- Check and make sure that the ID in step 10 "Yureka or any name you like" is appeared as "Yureka or any name you like (Data slot)"
27- Repeat the steps from 11 to 18
28- Reboot
29- Install the DBP again
30- Choose the primary ROM and reboot
31- To install boot ui==>Go to settings==>click on install boot ui (it will give you option to boot to which rom on every reboot)(This step is optional)(in order to use 'boot ui' update ramsdisk of both rom)
About Partitons:
data-slot = internal storage (can be used)(recommended)
Extsd-slot = external sd card (can be used)
Primary= System Partition ( No use )
Secondary = System Partition (Only can be used if much of sytem space left)
Multi-slots = cache partition ( No use )
What's Working:
Everything
What are not Working:
Tell me
Special thanks to:
@chenxiaolong for such an beautiful open source project
@dg28gadhavi (For guiding me the basics and helping in every manner he can)
Contributors
Nik001, dg28gadhavi, chenxiaolong
Official XDA Thread: Official Thread
Official Sources Code:https://github.com/chenxiaolong/DualBootPatcher
Sources Code:https://github.com/Nikesh001/DualBootPatcher
Plz give a thumbs up to the thread if you all like it:good:
HAPPY DUALBOOTING:good:
Click to expand...
Click to collapse
Hey please help me i am also trying to port this but I don't have a proper idea how to

Can i have 2 rom with 16gb rom?

Hey, i have try this. Buty device going to bootlop. How dp i fix this?

randifilan said:
Hey, i have try this. Buty device going to bootlop. How dp i fix this?
Click to expand...
Click to collapse
How can you get bootloop?

When i try this. When i switch tto the secondary rom. My phone is bootloop.

Can you provide a video for me on redmi 4x? I have try many time but still bootloop. My phone is vibrate when change the rom. I try this oh R.R 5.8.4.

Install the dualboot patcher utilities, download from official thread. Try it and comment again if it success.

can i use lazy flasher for step 2

Hey Nik
The official build is out ..and I have made an Instructional thread on mi forum .
I want to know ..Why can't I use magisk in second ROM
.Where I am doing wrong .
I have tried to flash it patched ... Failed
Non patched direct through recovery ...failed .
Plz help

Wasef x said:
Hey Nik
The official build is out ..and I have made an Instructional thread on mi forum .
I want to know ..Why can't I use magisk in second ROM
.Where I am doing wrong .
I have tried to flash it patched ... Failed
Non patched direct through recovery ...failed .
Plz help
Click to expand...
Click to collapse
Can you give me the link?

randifilan said:
Can you give me the link?
Click to expand...
Click to collapse
Sure ..
Here it is
http://en.miui.com/thread-825128-1-1.html

Wasef x said:
Sure ..
Here it is
http://en.miui.com/thread-825128-1-1.html
Click to expand...
Click to collapse
I already try from this, but failed, are success do that? I try in from RR, and install AEX, when switch the rom, my phone got vibrate twice and go to twrp, i use dualboot utility and doent work. Are you success?

randifilan said:
I already try from this, but failed, are success do that? I try in from RR, and install AEX, when switch the rom, my phone got vibrate twice and go to twrp, i use dualboot utility and doent work. Are you success?
Click to expand...
Click to collapse
I have it working .
One thing ..
When you switch ROM .
Don't do it directly .
First update the ramdisk of that ROM on which you wanna switch .
Otherwise it doesn't boot

Wasef x said:
I have it working .
One thing ..
When you switch ROM .
Don't do it directly .
First update the ramdisk of that ROM on which you wanna switch .
Otherwise it doesn't boot
Click to expand...
Click to collapse
I have update the ramdisk. But still not work. Also failed.

I can't enable wifi after updating primary rom (Xiaomi. Eu). . Any solution?

How to decrypted data?

strbgs27 said:
How to decrypted data?
Click to expand...
Click to collapse
TWRP...Wipe...Format Data

What means step 29? Install the APP again?
Edit: Omg! Selected Second Rom and now it starts direct in TWRP... And i can't start Primary Rom .....
Really dont try this if u want to save time x)))))))

Not working on redmi 4 indian
Currently I am on redmi 4x global stable miui 9 rom and my device is redmi 4 64gb. Everything goes well. But when I reboot my device it vibrate 5 times and reboot in twrp. I've tried two rom resurrection remix v5.8.5 and viper os, but no any works..

Custom Rom For Samsung J2 (J200H) S8 Experience Custom Build

Hey There ...........
Introducing My New Rom : S8 Experience Custom Build
Built V1
Based On Letest Stock 5.1.1 Lollipop Rom
Warnings :
1. You are now Void your Warrenty …….
2. Backup all your personal apps and important data to avoid loosing them …
3. Do all steps perfectly And carefully ……
4. I am not responsible for any mistake and Brick your phone ….
Features :
1. Only For J2 2015 3G Variants
2. Android 5.1.1 Lollipop
3. Based on latest J200HDDU0AQF1/AQG1 firmware
4. Medium Deboalted
5. Zipaligned
6. Signed
7. PreRooted
8. Added Busybox,SU.d and Init.d Support
9. S8 Style Statusbar
10. S8 Music Player
11. S8 Themed Apps
12. Xposed Enabled Zip Added
13. All Apps Are Updated
14. Fx Root Explorer
15. Sony Movies Added
16. S8 Wallpaper
17. Icon Themer
18. S8 Sound And Bootanimation
19. S8 Notes
20. S8 Internet
21. Briefings
22. Easy Mode Enabler For Settings
23. And More ...
See An Overview On YouTube :
How To Install :
1. Download Zip file Of the Rom From Link Given Below
2. You Mast Have TWRP Recovery on your device (See Here : https://forum.xda-developers.com/ga...p-3-0-2-1-samsung-galaxy-j2-sm-j200h-t3486994)
3. Copy the S8 Experience Custom Build.zip to Your SD card
4. Turn off Your Phone And press power+home button+Volume up button at a same time
5. After appearing TWRP recovery go to Wipe>Advanced Wipe Then Select Data, Dalvik / Art cache ,System , Cache And Then Wipe To wipe
6. Then Go To > Install and install S8 Experience Custom Build.zip file from sd card you downloaded before
7. Now reboot system and wait for approximately 15 minutes. ( NB : If It Takes Longer Than 15 Min To Boot Into Android, Then Remove The Battery And Power On The Device Again )
8. Now you are good to use this rom ......
[For Xposed Install : xposed-v78.0-sdk22-arm-custom-build-by-wanam-20151116.zip after installing rom given in the attachments]
Downloads :
https://drive.google.com/file/d/0B0rTXdhaTd2MME9waU5qVnozSEE/view?usp=sharing
Credits :
@ASSAYYED –for his best ever kitchen.
@ashyx - for his Twrp
@me - For building Rom
Contact Me :
On Facebook Only Send Massages
www.facebook.com/almamun512

Bro d
I downloaded this rom and installed everything is fine. When tried change the default keyboard my phone restarted every time. I could not change default keyboard

Can i play unsupported game after flashing this firm

Can i flash these rom for J200GDDUZAQF6

almamun512 said:
Hey There ...........
Introducing My New Rom : S8 Experience Custom Build
Built V1
Based On Letest Stock 5.1.1 Lollipop Rom
Warnings :
1. You are now Void your Warrenty …….
2. Backup all your personal apps and important data to avoid loosing them …
3. Do all steps perfectly And carefully ……
4. I am not responsible for any mistake and Brick your phone ….
Features :
1. Only For J2 2015 3G Variants
2. Android 5.1.1 Lollipop
3. Based on latest J200HDDU0AQF1/AQG1 firmware
4. Medium Deboalted
5. Zipaligned
6. Signed
7. PreRooted
8. Added Busybox,SU.d and Init.d Support
9. S8 Style Statusbar
10. S8 Music Player
11. S8 Themed Apps
12. Xposed Enabled Zip Added
13. All Apps Are Updated
14. Fx Root Explorer
15. Sony Movies Added
16. S8 Wallpaper
17. Icon Themer
18. S8 Sound And Bootanimation
19. S8 Notes
20. S8 Internet
21. Briefings
22. Easy Mode Enabler For Settings
23. And More ...
See An Overview On YouTube :
How To Install :
1. Download Zip file Of the Rom From Link Given Below
2. You Mast Have TWRP Recovery on your device (See Here : https://forum.xda-developers.com/ga...-3-0-2-1-samsung-galaxy-j2-sm-j200h-t3486994)
3. Copy the S8 Experience Custom Build.zip to Your SD card
4. Turn off Your Phone And press power+home button+Volume up button at a same time
5. After appearing TWRP recovery go to Wipe>Advanced Wipe Then Select Data, Dalvik / Art cache ,System , Cache And Then Wipe To wipe
6. Then Go To > Install and install S8 Experience Custom Build.zip file from sd card you downloaded before
7. Now reboot system and wait for approximately 15 minutes. ( NB : If It Takes Longer Than 15 Min To Boot Into Android, Then Remove The Battery And Power On The Device Again )
8. Now you are good to use this rom ......
[For Xposed Install : xposed-v78.0-sdk22-arm-custom-build-by-wanam-20151116.zip after installing rom given in the attachments]
Downloads :
https://drive.google.com/file/d/0B0rTXdhaTd2MME9waU5qVnozSEE/view?usp=sharing
Credits :
@ASSAYYED –for his best ever kitchen.
@ashyx - for his Twrp
@me - For building Rom
Contact Me :
On Facebook Only Send Massages
www.facebook.com/almamun512
Click to expand...
Click to collapse
Hi alamamun, is this rom work without any bugs?
Please give an update.

almamun512 said:
Hey There ...........
Introducing My New Rom : S8 Experience Custom Build
Built V1
Based On Letest Stock 5.1.1 Lollipop Rom
Warnings :
1. You are now Void your Warrenty …….
2. Backup all your personal apps and important data to avoid loosing them …
3. Do all steps perfectly And carefully ……
4. I am not responsible for any mistake and Brick your phone ….
Features :
1. Only For J2 2015 3G Variants
2. Android 5.1.1 Lollipop
3. Based on latest J200HDDU0AQF1/AQG1 firmware
4. Medium Deboalted
5. Zipaligned
6. Signed
7. PreRooted
8. Added Busybox,SU.d and Init.d Support
9. S8 Style Statusbar
10. S8 Music Player
11. S8 Themed Apps
12. Xposed Enabled Zip Added
13. All Apps Are Updated
14. Fx Root Explorer
15. Sony Movies Added
16. S8 Wallpaper
17. Icon Themer
18. S8 Sound And Bootanimation
19. S8 Notes
20. S8 Internet
21. Briefings
22. Easy Mode Enabler For Settings
23. And More ...
See An Overview On YouTube :
How To Install :
1. Download Zip file Of the Rom From Link Given Below
2. You Mast Have TWRP Recovery on your device (See Here : https://forum.xda-developers.com/ga...p-3-0-2-1-samsung-galaxy-j2-sm-j200h-t3486994)
3. Copy the S8 Experience Custom Build.zip to Your SD card
4. Turn off Your Phone And press power+home button+Volume up button at a same time
5. After appearing TWRP recovery go to Wipe>Advanced Wipe Then Select Data, Dalvik / Art cache ,System , Cache And Then Wipe To wipe
6. Then Go To > Install and install S8 Experience Custom Build.zip file from sd card you downloaded before
7. Now reboot system and wait for approximately 15 minutes. ( NB : If It Takes Longer Than 15 Min To Boot Into Android, Then Remove The Battery And Power On The Device Again )
8. Now you are good to use this rom ......
[For Xposed Install : xposed-v78.0-sdk22-arm-custom-build-by-wanam-20151116.zip after installing rom given in the attachments]
Downloads :
https://drive.google.com/file/d/0B0rTXdhaTd2MME9waU5qVnozSEE/view?usp=sharing
Credits :
@ASSAYYED –for his best ever kitchen.
@ashyx - for his Twrp
@me - For building Rom
Contact Me :
On Facebook Only Send Massages
www.facebook.com/almamun512
Click to expand...
Click to collapse
Can i install this Rom on J200hxxu0apf1???

How do you help with this attached file? Thank you
Attached Files
File Type: zip xposed-v78.0-sdk22-arm-custom-build-by-wanam-20151116.zip - [Click for QR Code]
How do you help with this attached file? Thank you

Almamun512 Please update rom?...

flashed it and working till now no bugs but i didn't got the apps round shape of s8 and a lot of mentioned pre-installed apps are missing

Kernel is not seandroid
Everything happens alright but atlast when I reboot my cell, on welcome screen it showing on top left corner
"KERNEL IS NOT SEANDROID ENFORCING". I removed battery and try but failed. Still this welcome page showing and not going forward. Please help me to figure it out.
[email protected]
Samsung galaxy j200f

Link is dead please reupload

[Treble][Rom]Lenovo zenui 5.0 for redmi note 6 pro

I found our device is treble supported type-A partition
So here i found (gsi) zenui 5.0 need to test
INSTALL
* Enable Treble > Flash a Fully-Trebled 8.1 ROM or just wipe data,cache,system
Mount the system, go to the system / etc directory backup selinux folder
Flash fbe disabler and permissiver
Wipe everything except vendor
Flash zui system flashme . zip
Mount system and vendor
Flash all patches
Flash sound fix
Mount the system to copy the selinux folder backed up in advance to the /system/etc directory.
Flash magisk if u need
* first reboot may take some time
Bootloop Fix:
- If you still have bootloop or systemui fc format data
Bugs:
- Nothing
(I'm not developer)
Android Version
- 8.1 Oreo
DOWNLOAD
https://mega.nz/#F!af4xQIKa!Ffz3u-9MOtFmxbDFUk9ZZg
PATCHES
https://share.weiyun.com/5khJ8F9

Thanks for sharing

thank for shearing but do you install it (screenshot?)

GSI RR 8.6.5 Vanilla + OpenGapps with New GSI Flasher easy and simple for Galaxy A51!!!

Note:
1. Your phone Unlock Bootloader >> Click here for tutorial Unlock Bootloader
2. TWRP >> Click here to install TWRP for A51
Link to download:
https://sourceforge.net/projects/an..._Remix_8.6.5_arm64-ab_vanilla.img.xz/download
https://opengapps.org/ >> choose ARM 64, Android 10, Pico / Nano
All files
New GSI Flasher (ChonDoe_Flasher.zip):
1. Unpacking RR GSI .xz to RR GSI .img >> using 7zip
2. Place those GSI in the same place with ChonDoe_Flasher + OpenGapps (Optional)
3. No need to compress or unpack
A51:
1. Enter TWRP Recovery
2. Wipe >> format data >> yes >> reboot recovery
3. Entering recovery.
4. Wipe >> advanced wipe >> cache, dalvik cache, data
5. Transfer file your GSI image file + OpenGapps + ChonDoe_Flasher (this 3 file must in the same directory / folder) from PC/laptop to internal storage or SDCard
6. Install >> ChonDoe_Flasher >> flash
7. Reboot system
8. Entering welcome screen
9. Setup
10.Reboot Recovery
11.Install >> Flash OpenGapps (Optional) >> Flash Magisk (Optional)
12.Reboot system
13.Home Screen
14. Done
Credit
@redymedan
@phhusson
@DiUst
@topjohnwu
El Rancho de Cornelio creator of this flasher

still with autobrightness and "proximity sensor" problem???

dantk said:
still with autobrightness and "proximity sensor" problem???
Click to expand...
Click to collapse
Yes.
But in A51 telegram group, working to make ROM for A51

dantk said:
still with autobrightness and "proximity sensor" problem???
Click to expand...
Click to collapse
Custom ROM for A51 >> https://forum.xda-developers.com/t/rom-a515x-refinedui-v1-0-oneui2-1-android10.4220373/

azteria2000 said:
Custom ROM for A51 >> https://forum.xda-developers.com/t/rom-a515x-refinedui-v1-0-oneui2-1-android10.4220373/
Click to expand...
Click to collapse
aaa, stock custom rom...ok

dantk said:
aaa, stock custom rom...ok
Click to expand...
Click to collapse
Please try, if you find any bug, let developer know in those thread

room have problem with bluetooth call?

MinoruYanke said:
room have problem with bluetooth call?
Click to expand...
Click to collapse
I'm using this ROM and work normal

azteria2000 said:
Yes.
But in A51 telegram group, working to make ROM for A51
Click to expand...
Click to collapse
What's the link to a51 telegram group?

CapitalZ21 said:
What's the link to a51 telegram group?
Click to expand...
Click to collapse
t.me/samsunga51

can i use ChonDoe_Flasher.zip for galaxy A71?

RobensonL said:
can i use ChonDoe_Flasher.zip for galaxy A71?
Click to expand...
Click to collapse
Yap this universal flasher for device with super / dynamic partition

Why on all gsi ROM my SD card issues!

sensejstg said:
Why on all gsi ROM my SD card issues!
Click to expand...
Click to collapse
sorry I dont using SD Card, so I dont know the answer

azteria2000 said:
t.me/samsunga51
Click to expand...
Click to collapse
Telegram a51
Samsung A51 || Global
Channel : @SamsungA51Updates Rules: - Respect Everyone. - Illegal stuff, spamming, selling or any promotion = ban - ENGLISH ONLY - Only ask for help for A51 - NO ETA - No NSFW stuff - Don't pm people unnecessarily + don't ask others to build stuff
t.me

Will the method work with android 11 too or only works with 10??
Thanks in advance