Hi,
my S8 is stuck on SAMSUNG GALAXY S8 , POWERED BY ANDROID screen.
I tried flash G950FXXU5DSFB and COMBINATION_FA70_G950FXXU5ASF1 , but no success.
Later I tried flash stock fw with DREAMLTE_EUR_OPEN_OMR30M.pit, DREAMLTE_EUR_OPEN_HIDDEN45M.pit, DREAMLTE_EUR_OPEN_HIDDEN200M.pit
But no fix.
Odin always shows Success, but phone can not enter recovery and can not wipe cache/factory reset.
The only I can enter is download mode and flash again.
I am thinking, that recovery part of eMMC chip can be damaged.
Is it possible to edit .pit file to move everything somewhere further and fix this problem?
Or do somebuddy have any other idea how to fix this problem?
Thx.
hdano said:
Hi,
my S8 is stuck on SAMSUNG GALAXY S8 , POWERED BY ANDROID screen.
I tried flash G950FXXU5DSFB and COMBINATION_FA70_G950FXXU5ASF1 , but no success.
Later I tried flash stock fw with DREAMLTE_EUR_OPEN_OMR30M.pit, DREAMLTE_EUR_OPEN_HIDDEN45M.pit, DREAMLTE_EUR_OPEN_HIDDEN200M.pit
But no fix.
Odin always shows Success, but phone can not enter recovery and can not wipe cache/factory reset.
The only I can enter is download mode and flash again.
I am thinking, that recovery part of eMMC chip can be damaged.
Is it possible to edit .pit file to move everything somewhere further and fix this problem?
Or do somebuddy have any other idea how to fix this problem?
Thx.
Click to expand...
Click to collapse
what was the last bootloader version successfully installed on the device?
youdoofus said:
what was the last bootloader version successfully installed on the device?
Click to expand...
Click to collapse
BL_G950FXXU5DSHC_CL16626841_QB25608985_REV00_user_low_ship.tar.md5
After OTA update not booting anymore, only boot screen.
???
Really nothing ???
I'm facing the same issue.. did you figure it out??
It's probably of your bootloader, just update it to the latest, update it correctly.
Mohamedkam000 said:
It's probably of your bootloader, just update it to the latest, update it correctly.
Click to expand...
Click to collapse
What does that even mean?
anastasisg said:
What does that even mean?
Click to expand...
Click to collapse
I mean install bootloader separately, on it's own, and the firmware separately without the built-in BL, might fix your problem.
Mohamedkam000 said:
I mean install bootloader separately, on it's own, and the firmware separately without the built-in BL, might fix your problem.
Click to expand...
Click to collapse
Okay I'll try and report.
Related
Hi.
Downloaded Philz Touch CWM recovery on my phone, then i installed the superuser file, rebooted the phone, but its stuck on the samsung logo when youre rebooting the phone. What have i done wrong?
Please help.
My pone is G900F
Regards,
Simon
rundstykker14 said:
Hi.
Downloaded Philz Touch CWM recovery on my phone, then i installed the superuser file, rebooted the phone, but its stuck on the samsung logo when youre rebooting the phone. What have i done wrong?
Please help.
My pone is G900F
Regards,
Simon
Click to expand...
Click to collapse
which firmware
pnr2020 said:
which firmware
Click to expand...
Click to collapse
I'm using stock, 5.0 lollipop.
rundstykker14 said:
I'm using stock, 5.0 lollipop.
Click to expand...
Click to collapse
use twrp its much better
It'll be done next time.
But how do i get out of this mess, cant do anything whit the phone now, i only have access to recovery mode. What should i do?
rundstykker14 said:
It'll be done next time.
But how do i get out of this mess, cant do anything whit the phone now, i only have access to recovery mode. What should i do?
Click to expand...
Click to collapse
Flash stock firmware again.
Do a initial setup.
Flash twrp
Disable MTP in mount options
Flash Update_supersu.zip
reboot
qubbus said:
Flash stock firmware again.
Do a initial setup.
Flash twrp
Disable MTP in mount options
Flash Update_supersu.zip
reboot
Click to expand...
Click to collapse
if you can get into download mode just flash twrp with odin
I flashed twrp whit odin, rebooted, and its still stuck at the samsung logo as its starts, and it has been there for at least 30min. suppose to take this long??
Do a full wipe
My SM-G900M is stuck in a boot loop.
When this happened, I Tried to do a factory reset plus cleaning cache in recovery. However this didnot fix my problem so I decided to reflash using odin, so i download the official rom and installed it but again same issue happened. After so much research and headache I installed CWM and did a kalvic, factory reset + format system a few times then I reflashed it afterwards. This seemed to have made the boot loop even worse since I doesn't pass through samsung galaxy s5 powered by android logo. That where the boot loop happens.
So overall I have tried
Reflashing ROM about 5 or 6 times using odin
Flashing a custom recovery multiple times
Factory reset
Clean cache + kalvic
FORMAT system and boot
Pulling the battery out for about a trillion times
Current result:
An Expensive Paper Holder
Thanks
PD: it only works when is pluged in
PhyraxYT said:
My SM-G900M is stuck in a boot loop.
When this happened, I Tried to do a factory reset plus cleaning cache in recovery. However this didnot fix my problem so I decided to reflash using odin, so i download the official rom and installed it but again same issue happened. After so much research and headache I installed CWM and did a kalvic, factory reset + format system a few times then I reflashed it afterwards. This seemed to have made the boot loop even worse since I doesn't pass through samsung galaxy s5 powered by android logo. That where the boot loop happens.
So overall I have tried
Reflashing ROM about 5 or 6 times using odin
Flashing a custom recovery multiple times
Factory reset
Clean cache + kalvic
FORMAT system and boot
Pulling the battery out for about a trillion times
Current result:
An Expensive Paper Holder
Thanks
Click to expand...
Click to collapse
You must flash pit file in odin but must find pit file for ur device : http://www.theandroidsoul.com/download-samsung-galaxy-s5-pit-files-and-information-84379/ You have problems with partition map
it doesn't works, i think my phone is completely useless now
PhyraxYT said:
it doesn't works, i think my phone is completely useless now
Click to expand...
Click to collapse
Download the latest firmware , bootloader end pit file for repartion, put all together in odin end flash.
If you have Samsung logo ur device is not death
Petreion said:
Download the latest firmware , bootloader end pit file for reparation, put all together in odin end flash.
If you have Samsung logo ur device is not death
Click to expand...
Click to collapse
Just asking:
Can i use the verizon file to unlock the bootloader for my s5?
i guess the answer is no but ... can i?
PD: i'm not with verizon
PhyraxYT said:
Just asking:
Can i use the verizon file to unlock the bootloader for my s5?
i guess the answer is no but ... can i?
PD: i'm not with verizon
Click to expand...
Click to collapse
Forget that, i found another bootloader file and it just didn't work
Firmware: http://www.sammobile .com/firmwares/download/68245/G900MUBU1BPB2_G900MUWM1BPB3_COL/
BootLoader: http://forum.xda-developers .com/showpost.php?p=52210611
Pit: http://www.theandroidsoul .com/download-samsung-galaxy-s5-pit-files-and-information-84379/
PhyraxYT said:
Just asking:
Can i use the verizon file to unlock the bootloader for my s5?
i guess the answer is no but ... can i?
PD: i'm not with verizon
Click to expand...
Click to collapse
Verizon file FROM THE SAME MODEL YOU MEAN SM-G900M OR OTHER DEVICE MODEL??
Petreion said:
Verizon file FROM THE SAME MODEL YOU MEAN SM-G900M OR OTHER DEVICE MODEL??
Click to expand...
Click to collapse
Same model
PhyraxYT said:
Same model
Click to expand...
Click to collapse
You can flash files from same model device without problems but if ur fone was looked by imei end you want to unlock the device by changing the firmware your device will not be unlocked the only way is octopus box
What you try to do recover the device or unlock device??
Petreion said:
You can flash files from same model device without problems but if ur fone was looked by imei end you want to unlock the device by changing the firmware your device will not be unlocked the only way is octopus box
What you try to do recover the device or unlock device??
Click to expand...
Click to collapse
Recover It, it's just that i found that dile and i wasn't sure if it would work and it didn't worked, i flashed the pit file, the lastest firmware (5.0 not 6.0) and the bootloader and it keeps having the bootloop
Hey guys, I need a little help to figure out what's going on with my dad's nexus 4.
When he tried to update to the newest version of Lollipop avaiable, the phone entered in a bootloop.
I tried flashing a factory image manually using this guide, but after it was done, the phone booted and it was still in a bootloop (stuck on the colored circles moving). I tried wiping data/factory reset afterwards and the phone remained in a bootloop state.
I also tried using the nexus root toolkit by WugFresh using the option "Flash Stock/Unroot" with the Soft brick/bootloop box checked, but it also didn't solve the problem.
There were no error messages when flashing, and I waited for 30 ~ 45 minutes after each flashing attempt to make sure that the phone was in fact in a bootloop.
I don't know what to do anymore... Can it be a hardware problem?
Did you manually flash the userdata.img file? If not, flash the file and, immediately after flashing the file in fastboot, go into stock recovery, perform a factory wipe, and reboot.
audit13 said:
Did you manually flash the userdata.img file? If not, flash the file and, immediately after flashing the file in fastboot, go into stock recovery, perform a factory wipe, and reboot.
Click to expand...
Click to collapse
I manually flashed the files and did a factory wipe, but it didn't solve the problem.
Did you flash the userdata.img file?
audit13 said:
Did you flash the userdata.img file?
Click to expand...
Click to collapse
yes, I did exactly as you said.
Hmm, usually flashing the userdata file and wiping via stock recovery works. Have you tried different factory images?
audit13 said:
Hmm, usually flashing the userdata file and wiping via stock recovery works. Have you tried different factory images?
Click to expand...
Click to collapse
I tried to downgrade to 5.0 and 4.4.4 , but on both of them I get stucked on the boot animation.
Try 4.1.1? If it works, it is possible that the emmc chip is damaged.
audit13 said:
Try 4.1.1? If it works, it is possible that the emmc chip is damaged.
Click to expand...
Click to collapse
On google's site, the factory images avaiable start from version 4.2.2, I'll try using that.
Okay. Good luck.
audit13 said:
Okay. Good luck.
Click to expand...
Click to collapse
So, I was able to downgrade to 4.2.0 version using the toolkit that I mentioned. The phone seems to be working fine now. What does that mean? Can I try to update to lollipop without fear?
You can try updating via ota updates to kk and LP but, if it gets stuck again on kk, I think the emmc chip is a problem.
audit13 said:
You can try updating via ota updates to kk and LP but, if it gets stuck again on kk, I think the emmc chip is a problem.
Click to expand...
Click to collapse
Okay, thank you very much for the help!
You're welcome. We're all here to help each other out.
Hopefully, you'll be able to upgrade to kk or LP.
audit13 said:
You're welcome. We're all here to help each other out.
Hopefully, you'll be able to upgrade to kk or LP.
Click to expand...
Click to collapse
I couldn't upgrade to 4.3 jellybean. It got stuck on a bootloop. So it means that it is a hardware problem?
Unfortunately, it appears that the emmc chip is damaged.
audit13 said:
Unfortunately, it appears that the emmc chip is damaged.
Click to expand...
Click to collapse
So, nothing I can really do about it?
Not that I know of.
hello everyone, my galaxy s8 was on stock rom, it was rooted with odin and super su, i made a mistake....
i installed twrp and wanted to flash it, it said that that it all flashed correctly, when i rebooted the phone it got stuck on the galaxy s8 logo, wont turn off and wont enter recovery mode, only thing i can do is enter download mode.
i tried to do whats written in this topic:
https://forum.xda-developers.com/galaxy-s8/help/stuck-bootloop-flashing-aqg5-fix-t3636857
im not 100% sure of my firmware version, its the one that came out with galaxy s8 when it launched 6.1 or 7.1
so i download the BL file to use it in odin, i tried the 1AQF7 and 1AQG7 also 1AGDG...
nothing helps, whenever i enter download mode and press START on odin with BL file added and straight away after pressing start hold down the volume down, plus bixby plus power i get the writing in odin NAND write start, i can never get beyond that, does that mean no matter how fast i try pressing all 3 buttons down, bixby and power i will never be able to fix the boot? or am i to slow?
can i push the needed file to fix the bootloader with ADB?
what else can i do now? is it anyhow possible to fix the boot, or if not to somehow please recover the data and transfer it to my pc memory? and start from scratch again with the phone as a last solution.
thank you all so much for your help in advance, been trying all day to fix it with odin, but no luck.
when i enter download mode this is written on my screen, maybe it helps:
odin mode
download speed:fast
product name: sm-g950f
current binary: custom
system status: custom
fap lock: off
oem lock: off
secure download: enabled
CCIC=S2MM005 hw: 6 boot 7 main:35
WARRANTY VOID 1 (0x0500)
RP SWREV: B:1 K:1 S:1
DID =0077ce53b1c2
EVT 1.1
LOT_ID=NBV09
rest is chip id etc which i think cant help anything.
thank you all once more
can someone please give me any help to boot back into android or recovery or recover my files ?
drazenm said:
can someone please give me any help to boot back into android or recovery or recover my files ?
Click to expand...
Click to collapse
i do not think you will b able to recover or boot back into android but you should be able to flash an official firmware using odin to get your phone up and running again.
you should always back up important stuff on your phone before attempting any flashing
How about using Odin to 'dirty' flash the exact firmware last working on your phone? For "dirty", I meant flashing home_csc which doesn't force a data wipe.
ikeny said:
How about using Odin to 'dirty' flash the exact firmware last working on your phone? For "dirty", I meant flashing home_csc which doesn't force a data wipe.
Click to expand...
Click to collapse
i have nothing to loose, how can i perform that? i think i know the firmware that ive used, but if i dont how can i be sure which one ive used ?
thank you .
if anyone can help/explain, so i know if i can do anything or i will have to wipe my phone
drazenm said:
i have nothing to loose, how can i perform that? i think i know the firmware that ive used, but if i dont how can i be sure which one ive used ?
thank you .
Click to expand...
Click to collapse
Go to sammobile.com, search firmware by country and carrier.
ikeny said:
Go to sammobile.com, search firmware by country and carrier.
Click to expand...
Click to collapse
i downloaded the firmware that i think i used, and i also downloaded the newest one. so what do i do now ?
drazenm said:
i downloaded the firmware that i think i used, and i also downloaded the newest one. so what do i do now ?
Click to expand...
Click to collapse
Google - how to flash firmware with Odin.
ikeny said:
Google - how to flash firmware with Odin.
Click to expand...
Click to collapse
i know how to flash firmware with odin but how am i to do it to repair my current firmware or patch it up as you have said?
so i dont overwrite and loose ma data?
thank you
I have issue too. I flash custom binary and bootloader don't allow boot to recovery via hard buttons. Now I boot to recovery via computer or rooted rom.
I have a bricked S7 edge with data I need to recover - the factory software update failed.
I can get to download mode and recovery mode (wipe cache etc.) but the phone will not boot.
My first thought was to root and install TWRP so I could access the phones storage over USB, but I dont have the OEM unlock option enabled.
Do I have any other options?
I think the only solution is flash with odin
Flash it with odin
But....
When flashing choose CSC
not home csc
Are you sure I should flash CSC? doesnt that wipe all the data?
Home_CSC: Flash the firmware without wiping the data (if you just want to update the ROM)
CSC: Flash the firmware along with a complete wipe including data (mostly used in cases like bricked phones or Go-Back-To-Stock situations)
I tried to flash Home_CSC but it still wont boot.
It rebooted and "Installing System Update"
then "no command" with yellow exclamation mark.
Is it possible to enable OEM unlock from ADB? Or any other way without booting?
If I can flash TWRP I can download pictures etc. over USB. Then perform a full factory reset.
nickone said:
Is it possible to enable OEM unlock from ADB? Or any other way without booting?
If I can flash TWRP I can download pictures etc. over USB. Then perform a full factory reset.
Click to expand...
Click to collapse
did you find the solution? i'm in your situation too
find PIT file and flash it..it may help you on partitioning
any luck?
Hey OP, how did you go with this?
I'm in same situation and was hoping you could shed some light on your endeavours
Electronix11 said:
Hey OP, how did you go with this?
I'm in same situation and was hoping you could shed some light on your endeavours
Click to expand...
Click to collapse
I'm hoping anyone got a solution for this. now I'm in the same situation
s0000007a said:
I'm hoping anyone got a solution for this. now I'm in the same situation
Click to expand...
Click to collapse
try to flash only AP , this saved my phone yesterday and i could keep all my data , i didnt wipe after installation
Ulf3000 said:
try to flash only AP , this saved my phone yesterday and i could keep all my data , i didnt wipe after installation
Click to expand...
Click to collapse
I tried that before but it doesn't work for me. my problem is after flashing, the phone is not able to initialize and boot. it keeps restarting, whether I flash only AP or all 4 of them, it passes and flashes successfully but then gets into endless rebooting....
Uhm if you have Twrp installed it actually activates MTP while inside it, so you can just grab your files from your computer
Edit : oh so you don't have twrp yet, sorry nvm im drunk
nickone said:
I have a bricked S7 edge with data I need to recover - the factory software update failed.
I can get to download mode and recovery mode (wipe cache etc.) but the phone will not boot.
My first thought was to root and install TWRP so I could access the phones storage over USB, but I dont have the OEM unlock option enabled.
Do I have any other options?
Click to expand...
Click to collapse
Download the latest firmware from sammobile for your model and put all files in odin. Use home csc if you don't want to wipe date. Should work without any probs.
Someone tell me how to install twrp with or without unlocking the bootloader :crying::crying:
My phone won't stop restarting even after flashing frimware and I can't enable OEM option
I need to flash no verity opt encrypt with twrp to fix this :crying: