wrong encryption password problem in android 10 - Xiaomi Mi A1 Questions & Answers

every time i flashed android 10 custom roms ( PE10 Beta20191006, AOSiP, Evolution X ) and then restart my phone and enter my encryption password it shows wrong password but on Pie its working fine. any solution

As far as I know encryption doesn't work on Q. You have to format data.

ranjodhricky said:
every time i flashed android 10 custom roms ( PE10 Beta20191006, AOSiP, Evolution X ) and then restart my phone and enter my encryption password it shows wrong password but on Pie its working fine. any solution
Click to expand...
Click to collapse
Surely you've read you needed to format data from recovery before trying them.
This is the most common problem each time custom ROMs start to be built with a new Android major version as a base, worse if they haven't any resources from an original firmware, since Mi A1 is stuck @Pie.
However, If is known as a problem with early releases, you're still clearly warned about it in each topic related to the ROMs you've mentioned.
For sure next builds will fix that and start to add features, and fix bugs which are obviously present in any case.

but PixelExperience 10 first beta version doesn't have this problem and Lineage os 17 also.
only AOSiP Quiche first builds had this problem but now PE10 2nd beta and evaluation x 3.0 have this problem too

ranjodhricky said:
every time i flashed android 10 custom roms ( PE10 Beta20191006, AOSiP, Evolution X ) and then restart my phone and enter my encryption password it shows wrong password but on Pie its working fine. any solution
Click to expand...
Click to collapse
im having same Problem

If you need a stable ROM, you need to wait. We are all excited to get Android 10 on Mi A1, but obviously first versions are unstable and come with problems, if you can't figure out a solution by yourself, I think is better to stick with stable Pie ROMs until devs find a solution

i just want to know that is there any way to flash without wiping data coz i dont want to backup my all data to pc and then restore again

ranjodhricky said:
i just want to know that is there any way to flash without wiping data coz i dont want to backup my all data to pc and then restore again
Click to expand...
Click to collapse
If I'm not wrong, LOS17 fixed this.
However, this isn't like the end of the world... Android 10 builds aren't in a mature state, unstable.
Even with the use of so called stable ROMs you're warned to make a backup first
All is in your hands, then don't come to blame if something goes wrong.

Format Data

Related

[ROM] [ Android P ] Redmi Note 4 | Ported from Pixel XL | Google Beta program

Project Treble is relatively a new concept for Android users. It allows obsolete device makers to get timely Android updates. With Project Treble, many custom ROM developers have been able to build the latest Android version from AOSP for even obscure brands. List of project treble enabled devices (custom ROM) who can boot Android P beta version
Instructions :-
1. Boot Into recovery
2. Flash any treble supported Oreo ROM
3.Go back and Mount Vendor
4.Flash P-DP3.img as system img
5. Now flash All 3 PostP.zip files in order
6. Rebbot
Downloads :-
1. PDp3.img - https://androidfilehost.com/?fid=818222786056037033
2.PostPzip1 - https://androidfilehost.com/?fid=5862345805528050327
3. PostPzip2 - https://androidfilehost.com/?fid=5862345805528050325
4. PostPzip3 - https://androidfilehost.com/?fid=5862345805528047841
Suggested Treble roms are Mokee ROM , Lineage 15.1
Note :- I don't own Any of these Downloads or porting.
But i have found this on YouTube , so Thought of sharing it with all of people.
Anyone flashed this?
mp7mandar said:
Anyone flashed this?
Click to expand...
Click to collapse
Yes but this instructions are not complete
tonibm19 said:
Yes but this instructions are not complete
Click to expand...
Click to collapse
Where is full flashing instructions?
h fee structure t said:
Project Treble is relatively a new concept for Android users. It allows obsolete device makers to get timely Android updates. With Project Treble, many custom ROM developers have been able to build the latest Android version from AOSP for even obscure brands. List of project treble enabled devices (custom ROM) who can boot Android P beta version
Instructions :-
1. Boot Into recovery
2. Flash any treble supported Oreo ROM
3.Go back and Mount Vendor
4.Flash P-DP3.img as system img
5. Now flash All 3 PostP.zip files in order
6. Rebbot
Downloads :-
1. PDp3.img - https://androidfilehost.com/?fid=818222786056037033
2.PostPzip1 - https://androidfilehost.com/?fid=5862345805528050327
3. PostPzip2 - https://androidfilehost.com/?fid=5862345805528050325
4. PostPzip3 - https://androidfilehost.com/?fid=5862345805528047841
Suggested Treble roms are Mokee ROM , Lineage 15.1
Note :- I don't own Any of these Downloads or porting.
But i have found this on YouTube , so Thought of sharing it with all of people.
Click to expand...
Click to collapse
You should've searched on xda
https://www.xda-developers.com/android-p-beta-port-snapdragon-project-treble-devices/
Also. It should be like. Remount vendor. Since vendor is shown to be mounted. But u need to tap and tap again to remount
So, if that works?
Any bug? Screenshot plz.
skyleet said:
Any bug? Screenshot plz.
Click to expand...
Click to collapse
Volte is not working otherwise everything is fine
skyleet said:
Any bug? Screenshot plz.
Click to expand...
Click to collapse
I tried it on Cardinal AOSP 5.7
Internet Data not working, VoLTE not supporting .
Even though small bugs.. It's working smooth with Wi-Fi.
Thanks to devs for their hard work .. Keep it up :good:
If u Need a Rom installation Detailed process and overview , u can check this video.
iamtheshankar said:
I tried it on Cardinal AOSP 5.7
Internet Data not working, VoLTE not supporting .
Even though small bugs.. It's working smooth with Wi-Fi.
Thanks to devs for their hard work .. Keep it up :good:
Click to expand...
Click to collapse
Still dont know who the devs are though....
??
iamtheshankar said:
I tried it on Cardinal AOSP 5.7
Internet Data not working, VoLTE not supporting .
Even though small bugs.. It's working smooth with Wi-Fi.
Thanks to devs for their hard work .. Keep it up :good:
Click to expand...
Click to collapse
I have read that Android P builds will start releasing for treble devices within a month , its not official though , but custom rom devwlopers can start making roms and trble builds based on that rom.
Okay as far i noticed that:
1. bluetooth is bugged and if you keep enabled both wifi and bluetooth, wifi will get disabled and you won't be able to turn it on. To fix that you just need to turn off bluetooth and reboot.
2. Fingerprints are deleted every reboot so using them is pointless. Stay just with PIN.
3. Lagfix is obligatory. You can find it on telegram. Phone without it runs AWFULLY and is just literally unusable.
4. You need to install google play fix, otherwise you won't be able to complete configuration, google apps won't work
5. after installing lagfix it just RUNS AWESOME! Really, oreo roms are just ****, and you can't complain with that. Every oreo rom runs slow when compared to nougat, but that rom is very fast, even faster than nougat.
ReDuXX528 said:
Okay as far i noticed that:
1. bluetooth is bugged and if you keep enabled both wifi and bluetooth, wifi will get disabled and you won't be able to turn it on. To fix that you just need to turn off bluetooth and reboot.
2. Fingerprints are deleted every reboot so using them is pointless. Stay just with PIN.
3. Lagfix is obligatory. You can find it on telegram. Phone without it runs AWFULLY and is just literally unusable.
4. You need to install google play fix, otherwise you won't be able to complete configuration, google apps won't work
5. after installing lagfix it just RUNS AWESOME! Really, oreo roms are just ****, and you can't complain with that. Every oreo rom runs slow when compared to nougat, but that rom is very fast, even faster than nougat.
Click to expand...
Click to collapse
What telegram link invite and lagfix link
ZjemCiKolege said:
What telegram link invite and lagfix link
Click to expand...
Click to collapse
@psemiGSI
ReDuXX528 said:
Okay as far i noticed that:
1. bluetooth is bugged and if you keep enabled both wifi and bluetooth, wifi will get disabled and you won't be able to turn it on. To fix that you just need to turn off bluetooth and reboot.
2. Fingerprints are deleted every reboot so using them is pointless. Stay just with PIN.
3. Lagfix is obligatory. You can find it on telegram. Phone without it runs AWFULLY and is just literally unusable.
4. You need to install google play fix, otherwise you won't be able to complete configuration, google apps won't work
5. after installing lagfix it just RUNS AWESOME! Really, oreo roms are just ****, and you can't complain with that. Every oreo rom runs slow when compared to nougat, but that rom is very fast, even faster than nougat.
Click to expand...
Click to collapse
Thanks for the heads up, thank God I'm not the only one who thinks Oreo ROMs are ass.
Thread closed as this has already been shared here
https://forum.xda-developers.com/redmi-note-4/how-to/experimantal-android-p-dp3-t3817446

Recommendation

NEED rom Recommendation Battery+Performance+Customization (if possible)
Doesn't matter if its oreo or pie based
Currently On Stock Oreo January Security patch
Performance is Not Good,Battery hardly survives
3hrs on screen Time
3 hours screen on time - battery needs replacement. Its just 10 bucks. Get a new battery for 10 bucks and swap it or get used to run everywhere around with a powerbank connected to your phone.
I got 2 days with fresh battery and latest stable LineageOS image clean installed (with ./flash-all.sh and TWRP)
@abdullahk6809
Alright, so i figured it would be easier to post via my computer rather than my phone.
TLDR : If you don't want to read all of this then stick with 8.1 roms for the best battery life and no issues. Cr droid and Resurrection Remix both posted their final 8.1 builds and both have run flawlessly for me. The same goes for AICP and AFAIK they are still merging up stream changes though minor with their weeklies.
As far as 9.0, we do not have official support, so it's still being worked on to get the best experience/no issues. AICP 9.0 has worked out the best for me with 9.0 then followed by Resurrection Remix.
There is a huge thing you need to be aware of if you're not already, that being our 9.0 roms currently use two different types of encryption. AOSIP, AICP, Resurrection Remix, CR Droid all use full disk encryption. (FDE) which is the same encryption we have always used. For that you just use the offical TWRP. All of the 9.0 stock roms currently are using file based encryption(FBE) and for that you need to use a specific TWRP that was made for it, and if you are currently on FDE (which you are) you need to format data after flashing the rom, meaning you will WIPE ALL OF YOUR INTERNAL. IF you decide to go back to an 8.1 rom, or try one that uses FDE, you will need to do the same process. Switch back to the offical TWRP, and format data after you flash the rom. If you go to FBE and stay on it, then you do NOT need to format data/switch twrp going one from FBE rom to another FBE rom, or updating the current rom.
So when choosing what to flash, you need to read the OP of each rom and know which encryption it uses, or it will not boot. Roms that run FBE AFAIK always have the twrp needed linked in the OP.
With 9.0, as i said, it is still a work in progress since we have lost official support. So if you read the threads some people are reporting issues with calls, Volte, issues with whatsapp etc.. So read the threads at least the last 15 or so pages to see if people are currently having issues. Like i said previously i could tell you to go flash x rom, because it works the best for me. But then you have issues because you use whatsapp and can't send voice messages or w/e and i don't use it. With people using the device for different reasons, you need to take time to see what works for you versus just a one word answer that will work for you.
A lot of people are having issues with 9.0 because of battery life, but I do not see a huge decrease in battery life, but i don't use battery killing apps like face book, whatsapp, or play games or anything. If you really are only getting 3 hours SOT you might want to see what is using your battery via better battery stats or gsam, because it's possible apps could be doing it, and no rom will change that. If you find out that no rouge apps are really killing your battery, as was just stated, depending on how old the device is, you might need a new battery. This phone is a good device but they used pretty ****ty components on it, thanks China. I myself have not had battery issues but i bought my device like three or four years ago, some devices are older.
Anyways, that's about all i can really offer for advice, i don't spend nearly as much time on this forum as i used to because i end up getting into confrontations with people that spread misinformaation, or refuse to follow simple courtesy that are not rules such as asking for eta's etc..
If you end up having any questions i might be able to answer, send me a PM. It might take me some time to respond as i don't use the app as much as i used to, but i'm always willing to answer even the dumbest question when asked via private message.
Lawlrus said:
@abdullahk6809
TLDR : If you don't want to read all of this then stick with 8.1 roms for the best battery life and no issues. Cr droid and Resurrection Remix both posted their final 8.1 builds and both have run flawlessly for me. The same goes for AICP and AFAIK they are still merging up stream changes though minor with their weeklies.
Click to expand...
Click to collapse
Hi Lawlrus, I'd just like to have a stable rom. Like you said 8.1 rom might be my best choice, but RR has stopped updating the 8.1 version so what I worry about is it's lacking security patches.
So would you suggest some roms that's stable and and getting updates as well ?
What I might need is :
1. dark theme 2. night light (blue light filter) 3. probably fling nav bar

ido Miui custom roms

here are miui custom roms for ido
miui10.2.3 android 8.1 by gani
https://drive.google.com/file/d/1MJ...3yUVkvZhiIndAciKmb66SRHXq1LmWo8Vl8N0to8T2MUMU
use magisk 19.4 to root
rekh said:
here are miui custom roms for ido
miui10.2.3 android 8.1 by gani
https://drive.google.com/file/d/1MJ...3yUVkvZhiIndAciKmb66SRHXq1LmWo8Vl8N0to8T2MUMU
use magisk 19.4 to root
Click to expand...
Click to collapse
Wi-Fi still slow?
what about fingerprint?
mohammadj26 said:
Wi-Fi still slow?
what about fingerprint?
Click to expand...
Click to collapse
Wi-Fi works properly , fingerprint does not, although it is recognized. Default font size is very small, next bigger to big. Reverting to previous rom seems to be difficult, as it gets into boot loop. Only few languages available, no french, german or spanish.
Janfri said:
Wi-Fi works properly , fingerprint does not, although it is recognized. Default font size is very small, next bigger to big. Reverting to previous rom seems to be difficult, as it gets into boot loop. Only few languages available, no french, german or spanish.
Click to expand...
Click to collapse
i tried it!
wifi goes slow
to see this issue go to download an app from play store
see that at first it is ok but after a while it goes slow! So SLOW!
mohammadj26 said:
i tried it!
wifi goes slow
to see this issue go to download an app from play store
see that at first it is ok but after a while it goes slow! So SLOW!
Click to expand...
Click to collapse
My Wi-Fi is working reasonably fast. And I figured out how to get the fingerprint working. I installed Always on Fingerprint AOF https://forum.xda-developers.com/apps/magisk/module-fingerprint-mi-5-mi-note-2-t3660179 and it works perfectly. I think I will stick a while with MIUI 10, in the first place because GPS is working out of the box and I had to use GPS Locker to get it working on RR.
Is this compatible with the redmi 3 (not pro) ?
LukaNyan said:
Is this compatible with the redmi 3 (not pro) ?
Click to expand...
Click to collapse
yes you can try, but it is a little slow.
Janfri said:
My Wi-Fi is working reasonably fast. And I figured out how to get the fingerprint working. I installed Always on Fingerprint AOF https://forum.xda-developers.com/apps/magisk/module-fingerprint-mi-5-mi-note-2-t3660179 and it works perfectly. I think I will stick a while with MIUI 10, in the first place because GPS is working out of the box and I had to use GPS Locker to get it working on RR.
Click to expand...
Click to collapse
So no bugs? U can log into mi account?
Paleskin said:
So no bugs? U can log into mi account?
Click to expand...
Click to collapse
You can log into mi account and you must if you have registered the device before, because you are asked to login before you can finish installation. MIUI 10 is quite slow on this device, fingerprint does not work most of the time.
MIUI 11 android 8.1 (Xiaomi EU 9.9.26 port IDO) Gapps included
Download From GDrive
Use this vendor and boot from telegram
thanks to ndminion @telegram
Bugs and Review:
you can't sign in mi account (for first boot into system click on forget password and skip this step)
some times dataservice stop message seen (rare crashes happen but they are not critical maybe some kind of other crash)
happily fingerprint work
in-call sound not adjustable
LED notification not work
video record in stock camera need a patch ( download from attachments and flash thorough recovery)
performance is ok
and i think it's not bad for daily usage
at least give it a try!
mute option doesn't silent all notifications but you can use DND
and read mode not work
mohammadj26 said:
i tried it!
wifi goes slow
to see this issue go to download an app from play store
see that at first it is ok but after a while it goes slow! So SLOW!
Click to expand...
Click to collapse
Slow Wifi always or with BT on only?
adrian_nwf said:
Slow Wifi always or with BT on only?
Click to expand...
Click to collapse
always (of course i didn't use BT so much)
but seems in miui 11 with new boot and vendor this issue fixed.
mohammadj26 said:
always (of course i didn't use BT so much)
but seems in miui 11 with new boot and vendor this issue fixed.
Click to expand...
Click to collapse
Any idea on how to fix this on miui 11?
on miui 11 camera switch between back and front are very slow
Mi account sign in failed
rekh said:
here are miui custom roms for ido
miui10.2.3 android 8.1 by gani
Today I've installed this ROM via TWRP. But, after start up, Mi account sign in screen prompting me to sign in. I gave my Mi account credential, but showing an error message "Can't get device status, wait a minute or two and try again". I've tried several times, but same thing happened. Can you please help me?
Click to expand...
Click to collapse
Paleskin said:
Any idea on how to fix this on miui 11?
Click to expand...
Click to collapse
Problem like LB device with custom recovery.
mohammadj26 said:
MIUI 11 android 8.1 (Xiaomi EU 9.9.26 port IDO) Gapps included
Download From GDrive
Use this vendor and boot from telegram
thanks to ndminion @telegram
Bugs and Review:
you can't sign in mi account (for first boot into system click on forget password and skip this step)
some times dataservice stop message seen (rare crashes happen but they are not critical maybe some kind of other crash)
happily fingerprint work
in-call sound not adjustable
LED notification not work
video record in stock camera need a patch ( download from attachments and flash thorough recovery)
performance is ok
and i think it's not bad for daily usage
at least give it a try!
mute option doesn't silent all notifications but you can use DND
and read mode not work
Click to expand...
Click to collapse
Bro thank you very much for your compilations and Roms for the Redmi 3 Ido. Based on your experience and previous suggestions (Mokee Rom) I would like to see if you could recommend a stable ROMs based on MIUI, whether Android Oreo, Android Pie or Android Q ... I would like the MIUI experience but I do not like the idea of ​​having to downgrade the Android version.
Or inclusive if you can give me your Top of stable custom or final version ROMS for the Redmi 3 Ido (If you included a MIUI based ROM it would be perfect).
AlphonseElric32 said:
Bro thank you very much for your compilations and Roms for the Redmi 3 Ido. Based on your experience and previous suggestions (Mokee Rom) I would like to see if you could recommend a stable ROMs based on MIUI, whether Android Oreo, Android Pie or Android Q ... I would like the MIUI experience but I do not like the idea of ​​having to downgrade the Android version.
Or inclusive if you can give me your Top of stable custom or final version ROMS for the Redmi 3 Ido (If you included a MIUI based ROM it would be perfect).
Click to expand...
Click to collapse
you can try this miui11 for a while it's not that bad
but it's not that stable as mokee 9.0 is
and sadly i have to say that there is no stable miui base rom
_____________________
Anyway, if you wanna try Q that mostly stable, you can install CrDroid 6.0
and i recommend this
CrDroid 6.0 base on android 10 build 20191112 By Reza_Adi_Pangestu
mohammadj26 said:
MIUI 11 android 8.1 (Xiaomi EU 9.9.26 port IDO) Gapps included
Download From GDrive
Use this vendor and boot from telegram
thanks to ndminion @telegram
Bugs and Review:
you can't sign in mi account (for first boot into system click on forget password and skip this step)
some times dataservice stop message seen (rare crashes happen but they are not critical maybe some kind of other crash)
happily fingerprint work
in-call sound not adjustable
LED notification not work
video record in stock camera need a patch ( download from attachments and flash thorough recovery)
performance is ok
and i think it's not bad for daily usage
at least give it a try!
mute option doesn't silent all notifications but you can use DND
and read mode not work
Click to expand...
Click to collapse
another rom miui 11 oreo. every things works.
flash with twrp treble.
https://drive.google.com/uc?export=download&confirm=XhYD&id=1X-VewwERT43d49_dzAI4nMW0MW1zO5xC
I have been using this rom for two weeks it seems to me quite stable excluding the bugs already described I would be very happy if someone continued the development

MIUI 12 slow as ...

Hello everyone,
I have my redmi note 7 with which I've kept using MIUI since I bought it. But now the android system weights for 9 go. I think it is insane for a phone, correct me if I'm wrong.
The phone is slow and when I try to erase everything et reinstall it. The system is faster but the system is still heavy.
Do you think rooting it can help solve the issue ? Or may those 9 go of system be caused by some viruses ?
Thanksnin advance,
soad405
{Mod edit: title adjusted to rule no. 2 - Oswald Boelcke}
soad405 said:
Hello everyone,
I have my redmi note 7 with which I've kept using MIUI since I bought it. But now the android system weights for 9 go. I think it is insane for a phone, correct me if I'm wrong.
The phone is slow and when I try to erase everything et reinstall it. The system is faster but the system is still heavy.
Do you think rooting it can help solve the issue ? Or may those 9 go of system be caused by some viruses ?
Thanksnin advance,
soad405
Click to expand...
Click to collapse
Unlock the bootloader and flash a customer without root. You have a big choice, the most one are very fast and stable
Thank you for your answer.
0) what is the weight of a normal custom system once installed ?
1) Do you mean to flash a rom and still using the original kernel ?
The last time I flashed a system, it was on a Galaxy S2.... Did the things changed ? At that time we had an important risk to brick the phone under gingerbread version of Android (that version had some kind of bug) .
2) Are the risks still high today ?
I looked a bit through the list or roms on xda and the lineageOS seems to come out as the lightest rom.
3) Is there a room that is more stable than the others ?
4) Is there a rom that is kept updated more than the others ?
5) What about the android security updates once a custom rom is installed ?
Sorry that is a lot of questions but I need an update since my galaxy S2
Thanks in advance,
Soad405
soad405 said:
Thank you for your answer.
0) what is the weight of a normal custom system once installed ?
1) Do you mean to flash a rom and still using the original kernel ?
The last time I flashed a system, it was on a Galaxy S2.... Did the things changed ? At that time we had an important risk to brick the phone under gingerbread version of Android (that version had some kind of bug) .
2) Are the risks still high today ?
I looked a bit through the list or roms on xda and the lineageOS seems to come out as the lightest rom.
3) Is there a room that is more stable than the others ?
4) Is there a rom that is kept updated more than the others ?
5) What about the android security updates once a custom rom is installed ?
Sorry that is a lot of questions but I need an update since my galaxy S2
Thanks in advance,
Soad405
Click to expand...
Click to collapse
First, when you unlock your bootloader your phone make a factory reset. Then you have the choice which ROM. lingeos, havoc, pixel os are stable and have the last security patch. Then you have the choice with or without gapps (Google apps). In every thread is a how to and the recommend gapps. Orange fox is a very good recovery. And brick risk is small. Sometimes I had a softbrick with testing around kernel and modules, but it easy to fix. Make a backup with the customer recovery before. The weight I don't know in the moment. My daughter change the pattern . In the forum is a old how to unlock and under development is the recovery. You will find it. Have fun
joke19 said:
First, when you unlock your bootloader your phone make a factory reset. Then you have the choice which ROM. lingeos, havoc, pixel os are stable and have the last security patch. Then you have the choice with or without gapps (Google apps). In every thread is a how to and the recommend gapps. Orange fox is a very good recovery. And brick risk is small. Sometimes I had a softbrick with testing around kernel and modules, but it easy to fix. Make a backup with the customer recovery before. The weight I don't know in the moment. My daughter change the pattern . In the forum is a old how to unlock and under development is the recovery. You will find it. Have fun
Click to expand...
Click to collapse
There is a like button
Thank you very much for your answer.
I'll post the comparison of the weight of the system once I'll have installed it.

Working ROM for Markw in late 2021?

Hi,
As of December 2021, is there an alternative ROM that would reliably work for Xiaomi Redmi 4 Prime?
I am asking because the standard MIUI ROM has not been updated for years and I am having quite a few glitches - I think, because of that. For example, Vivaldi browser and Fairemail frequently crash, as well as some other programs.
I am looking for something that would, really, just work, hardware- and software-wise. With no bugs. At least with no serious bugs.
My understanding is that the choice is not wide. Please report if you have tested a ROM that works for Redmi 4 Prime in late 2021. I don't want to throw away this phone.
I'm using the unofficial CrDroid by redispade and it's amazing. Best ROM i've used, everything works just fine except that I couldn't get device encryption working properly but if you don't need it it's a great Android 10 ROM.
Link: https://forum.xda-developers.com/t/rom-unofficial-13-07-2020-crdroid-6-8-10-0-markw.4020259/
sadly there don't seem to be any recent updates/roms for our cool markw
donrevan said:
everything works just fine except that I couldn't get device encryption working properly
Click to expand...
Click to collapse
That's the thing. I need encryption to keep my data safe.
I wonder if Lineage OS has any encryption issues. I read that when the drive is encrypted, you cannot use fingerprint unblocking. Perhaps there are issues with encryption itself, too.
Thanks for the reply though.
In my opinion, actually, the best Rom out there is lineage 17.1, in terms of stability, whole functionality and amazing battery backup, poor about the feature just in line with lineage tradition (just the possibility to reboot or power off in notification panel).
Of course the encryption make problematic the fingerprint recognition, as each interesting cusrom for Markw!
Sorry for my English.
*lineage 17 from @ShihabZzz
autokoise said:
In my opinion, actually, the best Rom out there is lineage 17.1
Click to expand...
Click to collapse
Thanks for the reply. There's already Lineage 18 for Markw, compiled by Shihabzzz. Is there a way to make encryption and fingerprint compatible though?
thumos2 said:
Thanks for the reply. There's already Lineage 18 for Markw, compiled by Shihabzzz. Is there a way to make encryption and fingerprint compatible though?
Click to expand...
Click to collapse
In my experience, nowadays, the 17 is more stable to 18 (every @ShihabZzz works is absolute accurate). You can try also mokee 9 or 10 and i suggest you orange fox recovery, the last one official 10.1 to try encryption (sorry but i never used encryption in my devices!)
autokoise said:
and i suggest you orange fox recovery, the last one official 10.1 to try encryption (sorry but i never used encryption in my devices!)
Click to expand...
Click to collapse
Okay, I see, thanks.
If anyone got encryption properly working with fingerprint, on any ROM, please let me know.
https://github.com/ShihabZzz/Bug_Reports/issues/18#issuecomment-867005556
autokoise said:
https://github.com/ShihabZzz/Bug_Reports/issues/18#issuecomment-867005556
Click to expand...
Click to collapse
Thanks, Autokoise. I have asked to confirm if the bug disappeared in the newer LOS versions.
I am using ported miui rom NSA based on miui eu.I am happy with it.It is android 9.I have no major bugs but I don't use encryption sao I can't tell you nothing about it.I tried many roms.Crdroid ,arrowos ,havoc lineage os bit I prefer ported miui.It is so sad that markw never get official android version update.

Categories

Resources