Database Users

Help rerooting after 4.3

My wife has a rooted nexus 7 2012 wifi and she unintentionally accepted the ota Android 4.3 update. So of course it unrooted her.
I originally had a hell of a time rooting this tablet using wugfresh nexus toolkit. Took me several days to succeed and the same thing is happening again. My Windows 7 laptop keeps installing the wrong drivers even though I selected the option to disable the auto driver configuration. Also USBDeview never shows the installed Samsung adb drivers yet when I try to install them I am warned they are already installed. It's already been hours and who knows how many retries and reboots!
So even though I'm a newbie I decided to go the Android sdk route.
1. Where do I download the files I need to just root the darn tablet?
2. What do I do next?
Please keep it simple........
Anyone want to walk me through it on the phone?
Thanks

If you are new to using SDK, check this out for a well laid out tut on how to get set up and rooted.

I now have android sdk set up.
What are the commands I should issue to root?
Thanks

now you need to flash a custom recovery then flash a root zip file via windows command prompt...Have you figured out how to interface with your device and the windows command prompt? eg;
-a good first command is "adb devices" and see if it lists your device, if it does your golden...
-then you would issue "adb reboot bootloader"
-once in bootloader you would issue "fastboot flash recovery whateverrecoveryouchose.img"
-then while in bootloader toggle with the volume keys to "recovery" option and press power
-now you will be in your new recovery you just flashed and you can push the zipped root file you chose to the sdcard, "adb push rootyouchose.zip /sdcard/"
-once its been pushed you can flash it in recovery and reboot, and you are now rooted
-this is the latest cwm recovery that you could flash in fastboot as described above
-this would be the root file you want to push then flash in recovery
-this may be of some help, scroll down halfway

Thank you so much for helping. You can't know how much it is appreciated.
-a good first command is "adb devices" and see if it lists your device, if it does your golden...
Got that. It works!!
-then you would issue "adb reboot bootloader"
Worked! Got the Android on his back.
-once in bootloader you would issue "fastboot flash recovery whateverrecoveryouchose.img"
Is recovery image on my pc or the tablet?
Why do I have to indicate the img name here if I will later select it

When I write
Fastboot flash......... Img
I get
Unknown partition 'the image file name'
"error : cannot determine image filename for. '.......'

You need to have downloaded a recovery image, that is what you flash I linked to one on my last post, that file is called "recovery-clockwork-touch-6.0.4.3-grouper.img" so you would issue,
fastboot flash recovery recovery-clockwork-touch-6.0.4.3-grouper.img
"fastboot flash recovery" is telling it to flash a recovery file and "recovery-clockwork-touch-6.0.4.3-grouper.img" is the recovery file in this case to be flashed so, combined its, "fastboot flash recovery recovery-clockwork-touch-6.0.4.3-grouper.img"
I do not use Windows, I use a terminal instead of windows command prompt so I can't be specific as I am not too familiar with windows command prompt. With terminal it is much easier in my opinion but you need to be running nix or Mac OS to have a terminal

OK, still can't get past the final stage in rooting my wife's nexus 2012 nexus 7.
I have the proper drivers installed and it connects fine with my Windows 7 laptop.
From a Windows 7 command prompt
1. "abd devices "
Correctly returns the attached nexus
2. "abd reboot bootloader "
Correctly reboots the tablet
3. **here's where things breakdown :
I downloaded the latest twrp openrecovery img for grouper and renamed it (for simpler typing)
" openrecovery-twrp-grouper.img"
However, when I now issue the command
"fastboot flash recovery openrecovery-twrp-grouper.img"
I get an error :
Cannot open openrecovery-twrp-grouper.img
The same thing happened with the clockwork-touch recovery img. That is why I downloaded the twrp img which I am more familiar with anyway.
So, am I missing a step between rebooting the bootloader and flashing the recovery? After the bootloader is rebooted and I get the Android on his back with an empty belly, do I need to do something else before flashing?
Do I need to put the recovery image somewhere special in the nexus file structure?
I'm stuck.
Thanks

Anderson2 said:
OK, still can't get past the final stage in rooting my wife's nexus 2012 nexus 7.
I have the proper drivers installed and it connects fine with my Windows 7 laptop.
From a Windows 7 command prompt
1. "abd devices "
Correctly returns the attached nexus
2. "abd reboot bootloader "
Correctly reboots the tablet
3. **here's where things breakdown :
I downloaded the latest twrp openrecovery img for grouper and renamed it (for simpler typing)
" openrecovery-twrp-grouper.img"
However, when I now issue the command
"fastboot flash recovery openrecovery-twrp-grouper.img"
I get an error :
Cannot open openrecovery-twrp-grouper.img
The same thing happened with the clockwork-touch recovery img. That is why I downloaded the twrp img which I am more familiar with anyway.
So, am I missing a step between rebooting the bootloader and flashing the recovery? After the bootloader is rebooted and I get the Android on his back with an empty belly, do I need to do something else before flashing?
Do I need to put the recovery image somewhere special in the nexus file structure?
I'm stuck.
Thanks
Click to expand...
Click to collapse
Hi, Anderson2...
If I may throw in my couple of cents...
The recovery.img file to be fastboot flashed (TWRP or CWM, it really doesn't matter which) needs be to stored on your PC... on the same PATH as the FASTBOOT.EXE file. The easiest way of accomplishing this, is to copy it directly into the folder that contains your FASTBOOT and ADB executables.
Where this folder is located on your PC depends on how you have fastboot setup, but it's usually stored in a folder called /Platform-Tools (if I remember correctly). But because I've never bothered myself installing the whole Android SDK (of which Fastboot is a part of) on my PC, I'm not sure of it's precise PATH (ie. it's location) but I think it's somewhere in the Android SDK folder.
For myself, I just maintain a simple folder on the Windows desktop containing the FASTBOOT.EXE and ADB.EXE files and a few necessary Windows .DLL files. When I wish to fastboot flash a Custom Recovery, I simply copy the Custom Recovery .img file (TWRP or CWM) into this folder, rename it to recovery.img (renaming it thus makes typing at the command prompt easier, and reduces the scope for potential typos)... boot the Nexus 7 into the bootloader, hook it up to my PC via USB. And then open a command prompt on the folder, and run...
Code:
fastboot devices
This is purely diagnostic, and hopefully confirms a working fastboot connection.
You should see something like this...
Code:
025d2d424bxxxxx fastboot
A serial number followed by the word fastboot. If you see this, you can go ahead and run...
Code:
fastboot flash recovery recovery.img
(This command assumes an unlocked bootloader... indicated by an unlocked padlock symbol under the Google logo upon boot. If it isn't, you should unlock it with fastboot oem unlock BEFORE fastboot flashing the Custom Recovery).
My point is, though... the 'recovery.img' to be flashed must be in the same folder as the FASTBOOT.EXE file, or as you have discovered, you will get the error "Cannot open recovery-twrp-grouper.img".
If fastboot can't find it.. it can't open it.
Hope this helps.
Rgrds.
Ged.

GedBlake said:
Hi, Anderson2...
If I may throw in my couple of cents...
The recovery.img file to be fastboot flashed (TWRP or CWM, it really doesn't matter which) needs be to stored on your PC... on the same PATH as the FASTBOOT.EXE file. The easiest way of accomplishing this, is to copy it directly into the folder that contains your FASTBOOT and ADB executables.
Where this folder is located on your PC depends on how you have fastboot setup, but it's usually stored in a folder called /Platform-Tools (if I remember correctly). But because I've never bothered myself installing the whole Android SDK (of which Fastboot is a part of) on my PC, I'm not sure of it's precise PATH (ie. it's location) but I think it's somewhere in the Android SDK folder.
For myself, I just maintain a simple folder on the Windows desktop containing the FASTBOOT.EXE and ADB.EXE files and a few necessary Windows .DLL files. When I wish to fastboot flash a Custom Recovery, I simply copy the Custom Recovery .img file (TWRP or CWM) into this folder, rename it to recovery.img (renaming it thus makes typing at the command prompt easier, and reduces the scope for potential typos)... boot the Nexus 7 into the bootloader, hook it up to my PC via USB. And then open a command prompt on the folder, and run...
Code:
fastboot devices
This is purely diagnostic, and hopefully confirms a working fastboot connection.
You should see something like this...
Code:
025d2d424bxxxxx fastboot
A serial number followed by the word fastboot. If you see this, you can go ahead and run...
Code:
fastboot flash recovery recovery.img
(This command assumes an unlocked bootloader... indicated by an unlocked padlock symbol under the Google logo upon boot. If it isn't, you should unlock it with fastboot oem unlock BEFORE fastboot flashing the Custom Recovery).
My point is, though... the 'recovery.img' to be flashed must be in the same folder as the FASTBOOT.EXE file, or as you have discovered, you will get the error "Cannot open recovery-twrp-grouper.img".
If fastboot can't find it.. it can't open it.
Hope this helps.
Rgrds.
Ged.
Click to expand...
Click to collapse
Thank you very much! That is very helpful. I had assumed the recovery img should be on the tablet. No wonder fastboot could not find it! I'm sure that will solve my problem.
Thank you for helping. I'm slowly learning my way around the adb, fastboot commands as I'm sure I'll need them again when 4.4 unroots me again.

Anderson2 said:
Thank you very much! That is very helpful. I had assumed the recovery img should be on the tablet. No wonder fastboot could not find it! I'm sure that will solve my problem.
Thank you for helping. I'm slowly learning my way around the adb, fastboot commands as I'm sure I'll need them again when 4.4 unroots me again.
Click to expand...
Click to collapse
No, problem Anderson2... glad to help.
Adb and fastboot are indeed powerful and useful tools, and I would strongly recommend anybody wishing to 'modify' their Nexus 7 (everything from rooting to flashing Custom ROMs) to familiarise themselves with the fundamentals of their operation... rather than relying on toolkits.
There are actually ways of flashing TWRP or CWM Custom Recoveries directly from the Nexus 7 itself, without recourse to either fastboot or the need for a PC... by using apps like Flash Image GUI or Flashify. But these apps need you to be already rooted, unfortunately.
So to summarize how to acquire root the old fashioned way....
---------------------------------------
1). Unlock the bootloader first with fastboot oem unlock. For security reasons, this will factory reset the device... ie., WIPE everything on it.
...but I assume your Nexus 7's bootloader is already unlocked, given it's been rooted once before.
And so swiftly skipping forward to step 2...
2). Fastboot flash a Custom Recovery (CWM or TWRP) with fastboot flash recovery recovery.img... where 'recovery.img' is the Custom Recovery of your choice. Reboot the device by using the Custom Recovery's own reboot option.
3). Download Chainfire's UPDATE-SuperSU-v1.65.zip root package directly to your Nexus 7. This DOES need to be on the Nexus 7. Most Android browsers (including Chrome) download stuff to the /download folder on the devices internal storage. You'll need to remember the location, for when you come to flash it with either CWM or TWRP.
4). Boot the Nexus 7 into the bootloader. Although you can do it with adb reboot bootloader, you can also do it manually as follows...
- Shut down the Nexus 7 completely.
- Press and hold the VOL-DOWN button... whilst holding, press the POWER-ON button for about 5-10 seconds. The device should now boot into the bootloader.
5). Boot into your Custom Recovery... whilst in the bootloader, use the VOL-KEYS to navigate to the RECOVERY MODE option, and press the POWER BUTTON to select. The device will now boot into either CWM or TWRP Custom Recovery.... whichever one you fastboot flashed earlier.
6). Now to ROOT!
** If using TWRP... tap on the INSTALL button, and then navigate to the /download folder on the Nexus 7's internal storage, and where Chainfires UPDATE-SuperSU-v1.65.zip is awaiting. Tap on it, and Swipe to Confirm Flash.
** If using CWM... tap on the INSTALL ZIP option, followed by CHOOSE ZIP FROM /SDCARD... tap on the folder 0/... this gives you access to the internal storage of the Nexus 7... from which you can navigate to the /download folder, where again, Chainfires UPDATE-SuperSU-v1.65.zip is awaiting. Tap on NO (the first default option) or YES - Install UPDATE-SuperSU-v1.65.zip.
On every screen in the CWM filemanager (by which you navigate) there is ALWAYS a ++++Go Back++++ option at the bottom of the screen. So you can always backout out of anything. In CWM you can also use the VOL UP and DOWN keys to scroll, with the POWER-BUTTON to select an option.
Once you have flashed Chainfire's SuperSU root package, reboot the device with the Custom Recovery's own reboot option.
Upon reboot, and whichever Custom Recovery you're using , it ***MIGHT*** suggest you are unrooted... and offer to fix root for you. Ignore it, and continue to reboot.
---------------------------------------
And that's it... that's how you root a first generation Nexus 7 (2012).
Hope this is of use and... Good luck.
Rgrds,
Ged.

GedBlake said:
No, problem Anderson2... glad to help.
Adb and fastboot are indeed powerful and useful tools, and I would strongly recommend anybody wishing to 'modify' their Nexus 7 (everything from rooting to flashing Custom ROMs) to familiarise themselves with the fundamentals of their operation... rather than relying on toolkits.
There are actually ways of flashing TWRP or CWM Custom Recoveries directly from the Nexus 7 itself, without recourse to either fastboot or the need for a PC... by using apps like Flash Image GUI or Flashify. But these apps need you to be already rooted, unfortunately.
So to summarize how to acquire root the old fashioned way....
---------------------------------------
1). Unlock the bootloader first with fastboot oem unlock. For security reasons, this will factory reset the device... ie., WIPE everything on it. I assume your bootloader is already unlocked.
So swiftly skipping forward to step 2....
2). Fastboot flash a Custom Recovery (CWM or TWRP) with fastboot flash recovery recovery.img... where 'recovery.img' is the Custom Recovery of your choice. Reboot the device by using the Custom Recovery's own reboot option.
3). Download Chainfire's UPDATE-SuperSU-v1.65.zip root package directly to your Nexus 7. This DOES need to be on the Nexus 7. Most Android browsers (including Chrome) download stuff to the /download folder on the devices internal storage. You'll need to remember the location, for when you come to flash it with either CWM or TWRP.
4). Boot the Nexus 7 into the bootloader. Although you can do it with adb reboot bootloader, you can also do it manually as follows...
- Shut down the Nexus 7 completely.
- Press and hold the VOL-DOWN button... whilst holding, press the POWER-ON button for about 5-10 seconds. The device should now boot into the bootloader.
5). Boot into your Custom Recovery... whilst in the bootloader, use the VOL-KEYS to navigate to the RECOVERY MODE option, and press the POWER BUTTON to select. The device will now boot into either CWM or TWRP Custom Recovery.... whichever one you fastboot flashed earlier.
6). Now to ROOT!
** If using TWRP... tap on the INSTALL button, and then navigate to the /download folder on the Nexus 7's internal storage, and where Chainfires UPDATE-SuperSU-v1.65.zip is awaiting. Tap on it, and Swipe to Confirm Flash.
** If using CWM... tap on the INSTALL ZIP option, followed by CHOOSE ZIP FROM /SDCARD... tap on the folder 0/... this gives you access to the internal storage of the Nexus 7... from which you can navigate to the /download folder, where again, Chainfires UPDATE-SuperSU-v1.65.zip is awaiting. Tap on NO (the first default option) or YES - Install UPDATE-SuperSU-v1.65.zip.
On every screen in the CWM filemanager (by which you navigate) there is ALWAYS a ++++Go Back++++ option at the bottom of the screen. So you can always backout out of anything. In CWM you can also use the VOL UP and DOWN keys to scroll, with the POWER-BUTTON to select an option.
Once you have flashed Chainfire's SuperSU root package, reboot the device with the Custom Recovery's own reboot option.
Upon reboot, and whichever Custom Recovery you're using , it ***MIGHT*** suggest you are unrooted... and offer to fix root for you. Ignore it, and continue to reboot.
---------------------------------------
And that's it... that's how you root a first generation Nexus 7 (2012).
Hope this is of use and... Good luck.
Rgrds,
Ged.
Click to expand...
Click to collapse
Thank you all very much. I greatly appreciate your help.
This post should be a sticky!
One more question, this nexus 7 2012 is my wife's. But I also own a nexus 7I this one a 2013 which is currently rooted with Android 4.3 and twrp Nandroid backups. I'm afraid that when the 4.4 ota upgrade comes along it might again unroot both our tablets. Are the rooting commands or procedures different for the 2013 nexus 7 (other than using a flo recovery img,) or do I do exactly the same as described above?
Again, you guys are wonderful to help us newbies out. Many thanks to all. Wish I could do something in return.

Anderson2 said:
Thank you all very much. I greatly appreciate your help.
This post should be a sticky!
One more question, this nexus 7 2012 is my wife's. But I also own a nexus 7I this one a 2013 which is currently rooted with Android 4.3 and twrp Nandroid backups. I'm afraid that when the 4.4 ota upgrade comes along it might again unroot both our tablets. Are the rooting commands or procedures different for the 2013 nexus 7 (other than using a flo recovery img,) or do I do exactly the same as described above?
Again, you guys are wonderful to help us newbies out. Many thanks to all. Wish I could do something in return.
Click to expand...
Click to collapse
Hello again, Anderson2...
Well, you sort of are already doing something in return.... you're asking questions.
Questions that require answers. Those answers, whoever posts them, may be of assistance to somebody else. Somebody else looking for a solution to a similar problem.
I always look upon these forums as a means of sharing. Not everybody can know everything. God knows, I don't know everything.... and I've been messing around with Android for three years now. So don't worry so much about it being a quid pro quo sort of arrangement.
I know what I know primarily as a result of my own experiences and what I've learned here from the many (in most cases, more knowledgeable) posters here on XDA. What you learn today, you can pass on to others, tomorrow (metaphorically speaking). We, all of us, stand on the shoulders of each other.
With regard to the second generation Nexus 7 (2013)... I'm afraid I really don't know much about it... but I'd be surprised if rooting it deviated significantly from rooting the first generation Nexus 7....
Namely...
1). Unlock the bootloader.
2). Flash a Custom Recovery.
3). Using that Custom Recovery, flash some SU root package... probably from Chainfire.
Anyway, I've found this tutorial here...
http://forum.xda-developers.com/showthread.php?t=2382051
...and it appears to follow a very similar template.
The Nexus 7 (2013) forum itself, which is also worth visiting, is located here....
http://forum.xda-developers.com/nexus-7-2013
Rgrds,
Ged.

Root help

Like I did about my GS2 a few hours ago, I'm requesting root help with my 2012 Nexus 7. And once again, I need a kind of "Rooting for Dummies" step-by-step, or something as simple as Framaroot. But since Framaroot and Nexus-es aren't pals, I'm at a loss.

AnAndroidUser said:
Like I did about my GS2 a few hours ago, I'm requesting root help with my 2012 Nexus 7. And once again, I need a kind of "Rooting for Dummies" step-by-step, or something as simple as Framaroot. But since Framaroot and Nexus-es aren't pals, I'm at a loss.
Click to expand...
Click to collapse
Hi, AnAndroidUser...
It depends on how much you know, and how comfortable you are running command lines... but rooting the Nexus 7 is pretty straightforward.
The classic/traditional way is as follows...
** Unlock the bootloader...
** Fastboot flash a Custom Recovery, such as CWM or TWRP...
** Using that Custom Recovery, flash the latest Chainfire SuperSU root package...
** Reboot... you're rooted!... profit.
This is the method I use, and it's never failed me.
-------------------
If you want something 'quick and easy', check out the various toolkits available.
I understand that Wugfresh or 'Wugs' will do the job for you. I've never used a toolkit myself, so I'm afraid I can't elaborate further.
I'm a fastboot man, through and through. I have an innate cordial distrust of toolkits, due to their lack of transparency... and learning the ropes 'the hard way' ie, via fastboot (and to a lesser extent, ADB), is something I would recommend to anybody wishing to tinker with their Nexus 7.
Rgrds,
Ged.

The thing is: I'm a bit fuzzy, if not completely not understanding the terms bootloader, CWM, and TWRP.

AnAndroidUser said:
The thing is: I'm a bit fuzzy, if not completely not understanding the terms bootloader, CWM, and TWRP.
Click to expand...
Click to collapse
Which is why the stickies and guides exist
Sent from my Nexus 5

AnAndroidUser said:
The thing is: I'm a bit fuzzy, if not completely not understanding the terms bootloader, CWM, and TWRP.
Click to expand...
Click to collapse
Hi, again AnAndroidUser...
These terms are commonplace amongst people who modify and tinker with their Nexus devices. Like any field of study, it has its own jargon and acronyms.
The following isn't an exhaustive glossary of terms... just some pointers, really.
The bootloader...
...is the first thing you see when you turn on your Nexus 7 from 'cold'.
Yep. That 'white-on-black' Google Logo IS the bootloader. As also is the 'white-on-black' battery charging animation, when charging with the device fully shut down. For the most part, the bootloader is something that people see... but don't recognize it's importance. It's passive. To fully interact with the bootloader directly, requires that you boot the device as follows...
...from a fully shutdown state...
...press and hold VOL DOWN...
...whilst holding VOL DOWN, press POWER ON...
The N7 should now boot into the bootloader directly... and which is characterised by A GREEN ANDROID lying on it's back, and some text in a tiny font on the lower left hand side of the screen. This text displays, (amongst other things), the bootloader LOCK STATE, the bootloader version (the latest of which is v4.23). In the upper right hand side, will be the word START. This is actually part of a very rudimentary menu/selection scheme. Using the VOL Up or VOL Down buttons, you can cycle through these options...
START>RESTART BOOTLOADER>RECOVERY MODE>POWER OFF>START
...and with the POWER BUTTON to select a given option.
From here in the bootloader, and with the N7 hooked up to a PC via USB, you can now run FASTBOOT commands (you'll need the Android SDK for this), in a command prompt window. The first and most significant command will be...
Code:
fastboot oem unlock
This 'unlocks' the bootloader... and allows subsequent fastboot flashing.
The 'white-on-black' Google Logo will now have an 'unlocked padlock' symbol at the bottom of the screen, at boot... signifying that the bootloader is unlocked.
**** WARNING - UNLOCKING THE BOOTLOADER WILL PERFORM A FACTORY RESET, AND WILL COMPLETELY WIPE THE DEVICE. ALL USER INSTALLED APPS WILL BE LOST, AS WILL ANY CONTENT - DOCUMENTS, IMAGES, MUSIC FILES, VIDEO FILES YOU MAY HAVE ACQUIRED. THE NEXUS 7 WILL BE AS IT WAS WHEN FIRST UNBOXED. REQUIRING THE RE-SETTING UP OF YOUR WIFI KEY AND RE-ENTERING YOUR GOOGLE ACCOUNT/PLAYSTORE DETAILS ****
CWM and TWRP...
ClockWorkMod and TeamWinRecoveryProject... are both CUSTOM RECOVERIES.
With stock, unmodified Android, you already have a recovery... but it's very limited in it's capabilities. It's really only ever used to update your currently installed version of Android, when OTA updates from Google become available.
Custom Recoveries however, such as CWM or TWRP, are significant enhancements upon the stock recovery.
With CWM or TWRP, you can...
** Root the device...
** Flash a Custom ROM..
** Flash a Custom Kernel...
** Perform a NANDROID backup of your entire system, as it currently stands...
** Perform a NANDROID restore of your last known 'good' working setup...
(--- think of Nandroids, as a bit like 'restore points', in Windows ---).
A Custom Recovery is fastboot flashed with this syntax...
Code:
fastboot flash recovery [name-of-recovery-file.img]
Once a Custom Recovery is successfully installed, you can then use it to flash the latest SuperSU root package from Chainfire... which coincidentally has just recently been updated to v1.93. Here is the link...
http://download.chainfire.eu/382/SuperSU/UPDATE-SuperSU-v1.93.zip
Download directly to your N7 and flash in CWM or TWRP.
---------------------------
Finally, and in conclusion... read the 'stickies' about fastboot. Fastboot is key to modifying your Nexus 7... and is also extremely useful to know when flashing an official Google Factory stock image.
Hope this general overview helps...
Rgrds,
Ged.

[Q] Slate 7 Extreme root,flash question

Hi, I am a happy owner of the HP Slate 7 Extreme which is basically the same device as you guys are using.I am still on the 4.2 Jelly bean since HP are not pushing over the air updates with our devices.I want to use the script from the development forum "[Script] [Utility] Nvidia Tegra Note 7 Kitkat Unlock BL, Restore, Recovery, & Root", I want to know if anyone has tried to use it with the Slate Extreme or if it simply should work on the Jelly Bean aswell. Thanks guys.

still have freeze/hang issue..
http://forum.xda-developers.com/showthread.php?t=2663449&page=2

mofared said:
still have freeze/hang issue..
http://forum.xda-developers.com/showthread.php?t=2663449&page=2
Click to expand...
Click to collapse
What about the 4.3+ ?

crazyhacker202 said:
What about the 4.3+ ?
Click to expand...
Click to collapse
i have not test that yet but i believe it should work because i have tested the 4.4.2 and 4.2.2 evga ROM from here using the cwm install from sdcard method..
http://forum.xda-developers.com/showthread.php?t=2627671
The only thing that puzzles me now is i am unable to perform a system recovery from HP update.zip using cwm.
http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=6608632#N147
So right now i am stuck with 4.2.2 evga ROM all is good and functional.
I have read some post that by updating OTA fix issue in 4.4 but i have no idea on how to get the OTA update.
p/s: This is my first tablet and root attempt...
edit:
i found out that rootjunky has already released the 4.4.2 with 2.3 OTA i will give it a try and feedback later

mofared said:
i have not test that yet but i believe it should work because i have tested the 4.4.2 and 4.2.2 evga ROM from here using the cwm install from sdcard method..
http://forum.xda-developers.com/showthread.php?t=2627671
The only thing that puzzles me now is i am unable to perform a system recovery from HP update.zip using cwm.
http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=6608632#N147
So right now i am stuck with 4.2.2 evga ROM all is good and functional.
I have read some post that by updating OTA fix issue in 4.4 but i have no idea on how to get the OTA update.
p/s: This is my first tablet and root attempt...
edit:
i found out that rootjunky has already released the 4.4.2 with 2.3 OTA i will give it a try and feedback later
Click to expand...
Click to collapse
First, nope, you'll still get freezing. I've tried all the ROMs.
Second, If you want to go back to HP's recovery, do the following:
Create a copy of update.zip and navigate to META-INF\com\google\android and open up updater-script
Delete the first three lines.
Transfer your new update.zip to your device and flash. Allow it to re-write the recovery partition.
NOTE THAT YOUR DEVICE WILL NOT ADVANCE PAST THE BOOT ANIMATION. THIS IS NORMAL.
Copy the original update.zip to a SD card and insert it into the device.
Now go to the HP recovery partition that now exists on your device and follow HP's restore instructions.
You're done, the stock 4.2.2 that came with your device is now installed.
Had to figure this out the hard way after I lost my original backup.
To the original poster, you can get it to work, but you need to make modifications to the script's fastboot commands (they will require "fastboot -i 0x03F0" before they will do anything) and you will need to setup your machine for ADB with the Slate 7 Extreme. It won't work out of the box, you can find support for that here: http://h30434.www3.hp.com/t5/Android-Tablets-e-g-HP-Slate-7/ADB-drivers/td-p/2574571

There was an individual who has received the 4.4.2 update from HP on his Slate Extreme over at the HP forums. I believe he stated he received 20 units donated directly from HP and was wondering why only 1 of them received the update. I believe the reason stated is that he most likely received a non-retail unit by accident. Not sure if he ever dumped the ROM or even knows how. I don't know either otherwise I'd try to contact him to get him to do so.

Re-write recovery partition?
Robo_Leader said:
First, nope, you'll still get freezing. I've tried all the ROMs.
Second, If you want to go back to HP's recovery, do the following:
Create a copy of update.zip and navigate to META-INF\com\google\android and open up updater-script
Delete the first three lines.
Transfer your new update.zip to your device and flash. Allow it to re-write the recovery partition.
NOTE THAT YOUR DEVICE WILL NOT ADVANCE PAST THE BOOT ANIMATION. THIS IS NORMAL.
Copy the original update.zip to a SD card and insert it into the device.
Now go to the HP recovery partition that now exists on your device and follow HP's restore instructions.
You're done, the stock 4.2.2 that came with your device is now installed.
Had to figure this out the hard way after I lost my original backup.
To the original poster, you can get it to work, but you need to make modifications to the script's fastboot commands (they will require "fastboot -i 0x03F0" before they will do anything) and you will need to setup your machine for ADB with the Slate 7 Extreme. It won't work out of the box, you can find support for that here: http://h30434.www3.hp.com/t5/Android-Tablets-e-g-HP-Slate-7/ADB-drivers/td-p/2574571
Click to expand...
Click to collapse
I did flash the modified update.zip but CWM doesn't give me the option to re-write the recovery partition. I go straight to "Install from sdcard complete". How is that re-write done?
*Update* All done - Had to select NO to questions on reboot (Replace recovery and root). Thanks so much - back to stock 4.2.2

Belmichel said:
I did flash the modified update.zip but CWM doesn't give me the option to re-write the recovery partition. I go straight to "Install from sdcard complete". How is that re-write done?
*Update* All done - Had to select NO to questions on reboot (Replace recovery and root). Thanks so much - back to stock 4.2.2
Click to expand...
Click to collapse
See my HP Slate 7 Extreme Root post: http://forum.xda-developers.com/showthread.php?t=2850893

What am I supposed to open updater-script with?
---------- Post added at 03:47 AM ---------- Previous post was at 03:31 AM ----------
Robo_Leader said:
First, nope, you'll still get freezing. I've tried all the ROMs.
Second, If you want to go back to HP's recovery, do the following:
Create a copy of update.zip and navigate to META-INF\com\google\android and open up updater-script
Delete the first three lines.
Transfer your new update.zip to your device and flash. Allow it to re-write the recovery partition.
NOTE THAT YOUR DEVICE WILL NOT ADVANCE PAST THE BOOT ANIMATION. THIS IS NORMAL.
Copy the original update.zip to a SD card and insert it into the device.
Now go to the HP recovery partition that now exists on your device and follow HP's restore instructions.
You're done, the stock 4.2.2 that came with your device is now installed.
Had to figure this out the hard way after I lost my original backup.
To the original poster, you can get it to work, but you need to make modifications to the script's fastboot commands (they will require "fastboot -i 0x03F0" before they will do anything) and you will need to setup your machine for ADB with the Slate 7 Extreme. It won't work out of the box, you can find support for that here: http://h30434.www3.hp.com/t5/Android-Tablets-e-g-HP-Slate-7/ADB-drivers/td-p/2574571
Click to expand...
Click to collapse
---------- Post added at 04:25 AM ---------- Previous post was at 03:47 AM ----------
I downloaded a script editor and deleted the first three lines of updater script but it still fails to flash.

Finally success!
Robo_Leader said:
First, nope, you'll still get freezing. I've tried all the ROMs.
Second, If you want to go back to HP's recovery, do the following:
Create a copy of update.zip and navigate to META-INF\com\google\android and open up updater-script
Delete the first three lines.
Transfer your new update.zip to your device and flash. Allow it to re-write the recovery partition.
NOTE THAT YOUR DEVICE WILL NOT ADVANCE PAST THE BOOT ANIMATION. THIS IS NORMAL.
Copy the original update.zip to a SD card and insert it into the device.
Now go to the HP recovery partition that now exists on your device and follow HP's restore instructions.
You're done, the stock 4.2.2 that came with your device is now installed.
Had to figure this out the hard way after I lost my original backup.
To the original poster, you can get it to work, but you need to make modifications to the script's fastboot commands (they will require "fastboot -i 0x03F0" before they will do anything) and you will need to setup your machine for ADB with the Slate 7 Extreme. It won't work out of the box, you can find support for that here: http://h30434.www3.hp.com/t5/Android-Tablets-e-g-HP-Slate-7/ADB-drivers/td-p/2574571
Click to expand...
Click to collapse
I have the 4450 extreme and one the things that was a little different- is that I had put the update zip on the sd card prior and it did the update on its own... WEIRD but acceptable! rooted and on 4.4.2- thanks man!

I didn't have any luck doing it this way. I ended up getting there by a slightly different avenue.
My s7e was totally non functional beyong fastboot and recovery mode being operational. I ended up downloading tegratools 2.2. Using the fastboot included in that I unlocked my boot loader with fastboot by the command
Code:
fastboot -i 0x03F0 oem unlock
(The '-i 0x03F0' is a code relating to the specific model, apparently without this the tablet will ignore your command. Please also remember that the unlock factory resets the tablet.)
It may be overboard again, but I also formatted all the system partitions
Code:
fastboot -i 0x03F0 erase boot
fastboot -i 0x03F0 erase system
fastboot -i 0x03F0 erase userdata
fastboot -i 0x03F0 erase cache
fastboot -i 0x03F0 erase preinstall
fastboot -i 0x03F0 reboot
I uploaded cwm recovery from the above version of tegratools to my s7e as it seems a bit more forgiving with signatures than the stock recovery. I used that to upload a version of update.zip with the "assert" lines removed from META-INF\com\google\android\updater-script. I also self signed the .zip to reduce the likelyhood of my upload being rejected by the tablet, it may not be needed, but I did it anyway.
Code:
adb sideload slate7update-signed.zip
when completing the firmware flash, apparently there is a common problem of the kernel not flashing correctly when recovery takes place and giving an "Error 7", this is the problem I think you solved by re-writing the unmodified firmware (but that didn't work for me)
Anyway I had to fix it by dropping back to fastboot and flashing it to "staging", which puts the kernel in a placeholder until the next boot, at which point the kernel will be written to the correct spot. Because of this writing to the correct partition, you will notice a quick double-boot as the updated kernel is written to the correct point in firmware.
Code:
fastboot -i 0x03F0 flash staging "c:\fastboot-s7e\blob"
I hope this helps.
Oh and to those curious, the beats version appears incompatible with the standard s7e, I tried modifying a rom in the same way as above and it just went to a blank screen. My guess is they've done some form of sanity check in the kernel, given that every "beats" version I've read about in tablets has been a software-only modification. I've not bothered trying to use the beats version rom with the s7e kernel, I'll leave that for someone else to try in greater depth as I'm just happy that I got everything working again.
references:
Fastboot (previously this): This is a copy of the twrp/cwm roms as well as fastboot & adb taken from tegratools 2.2 mentioned above.
SignApk (Previously this): The java files and self signing certificate I used to sign the .zip file. It was actually a bit of a pain to find a working signapk.jar that had the valid certificates included, most were broken in one way or another when trying to sign on ubuntu 12.04.
slate7update-signed.zip (previously this): A signed copy of update.zip with META-INF\com\google\android\updater-script modified to remove the assert validation lines sanity checks, be careful with this, you could nuke your tablet if you use it on an incompatible bit of hardware.
guide.txt (previously this): A full how-to with a number of things I've omitted from this response.
To those wondering, I collated the above procedure from a dozen different links on a good four or five websites, including a number of threads here on XDA. Thank you to anyone out there that contributed to the information I found, you really made my day so much better in being able to recover my tablet.

It Worked! But...
mike-s said:
I didn't have any luck doing it this way. I ended up getting there by a slightly different avenue.
My s7e was totally non functional beyong fastboot and recovery mode being operational. I ended up downloading tegratools 2.2. Using the fastboot included in that I unlocked my boot loader with fastboot by the command
Code:
fastboot -i 0x03F0 oem unlock
(The '-i 0x03F0' is a code relating to the specific model, apparently without this the tablet will ignore your command. Please also remember that the unlock factory resets the tablet.)
It may be overboard again, but I also formatted all the system partitions
Code:
fastboot -i 0x03F0 erase boot
fastboot -i 0x03F0 erase system
fastboot -i 0x03F0 erase userdata
fastboot -i 0x03F0 erase cache
fastboot -i 0x03F0 erase preinstall
fastboot -i 0x03F0 reboot
I uploaded cwm recovery from the above version of tegratools to my s7e as it seems a bit more forgiving with signatures than the stock recovery. I used that to upload a version of update.zip with the "assert" lines removed from META-INF\com\google\android\updater-script. I also self signed the .zip to reduce the likelyhood of my upload being rejected by the tablet, it may not be needed, but I did it anyway.
Code:
adb sideload slate7update-signed.zip
when completing the firmware flash, apparently there is a common problem of the kernel not flashing correctly when recovery takes place and giving an "Error 7", this is the problem I think you solved by re-writing the unmodified firmware (but that didn't work for me)
Anyway I had to fix it by dropping back to fastboot and flashing it to "staging", which puts the kernel in a placeholder until the next boot, at which point the kernel will be written to the correct spot. Because of this writing to the correct partition, you will notice a quick double-boot as the updated kernel is written to the correct point in firmware.
Code:
fastboot -i 0x03F0 flash staging "c:\fastboot-s7e\blob"
I hope this helps.
Oh and to those curious, the beats version appears incompatible with the standard s7e, I tried modifying a rom in the same way as above and it just went to a blank screen. My guess is they've done some form of sanity check in the kernel, given that every "beats" version I've read about in tablets has been a software-only modification. I've not bothered trying to use the beats version rom with the s7e kernel, I'll leave that for someone else to try in greater depth as I'm just happy that I got everything working again.
references:
Fastboot: This is a copy of the twrp/cwm roms as well as fastboot & adb taken from tegratools 2.2 mentioned above.
SignApk: The java files and self signing certificate I used to sign the .zip file. It was actually a bit of a pain to find a working signapk.jar that had the valid certificates included, most were broken in one way or another when trying to sign on ubuntu 12.04.
slate7update-signed.zip: A signed copy of update.zip with META-INF\com\google\android\updater-script modified to remove the assert validation lines sanity checks, be careful with this, you could nuke your tablet if you use it on an incompatible bit of hardware.
guide.txt: A full how-to with a number of things I've omitted from this response.
To those wondering, I collated the above procedure from a dozen different links on a good four or five websites, including a number of threads here on XDA. Thank you to anyone out there that contributed to the information I found, you really made my day so much better in being able to recover my tablet.
Click to expand...
Click to collapse
I was able to unlock my bootloader using the above method and it worked. My s7e rebooted and everything was working normally. I loaded the bootloader again to go in and do a cache wipe and my 3 year old bumped into me as I was holding down the volume+ and power buttons. Now I'm stuck in ADX mode (black screen but recognized by my pc, have tried connecting to charger, volume+ and power, volume - and power, nothing works) . I've read that Advent has released adx files for the Vega Note 7 and you can use Tegra Note 7 Super Tools to restore the Nvidia Note 7. I'm wondering if I can use the update.zip file and the nvflash files from Nvidia to restore my tablet from ADX mode.
Any suggestions?

Mike-S, Thanks for the in depth how-to. I tried to sell my Extreme 4450 and the guy that I sold it to said when he received it was in boot loop. I got it back and it is indeed the one I sent him, however, now I have a bricked tab that doesn't even allow fastboot. I have, like others tried calling HP, tried installing per you instruction and finally considered just throwing away or selling. I almost seems like the recovery was wiped... I can get to uploading from SD and have tried using your info to accomplish with no success. Any suggestions? I hate to smash it or try and sell if I can fix it.
Thank you in advance for anyone's help

som1special2 said:
however, now I have a bricked tab that doesn't even allow fastboot. I have, like others tried calling HP, tried installing per you instruction and finally considered just throwing away or selling.
Click to expand...
Click to collapse
Damn, I'm sorry to say that I'm unsure if i'll be able to help much or at all. All i can suggest is look and see if there is any pre-boot subsystem that connects to your pc via usb, similar to the mediatek "preboot mt65xx" which can sort of provide a last gasp chance of recovery.

help with ROM
Hi there,
Need desperate help. I followed the instructions here but ended up with no OS in the s7e. I kept on trying to install a signed ROM via ADB, it reaches 100% senidng but always failed inside TWRP. Not succesful even with CWM. I even tried installing from SD card but no success. Please help, thank you.

Anyone still around here?
Mike S ... not sure you (or anyone else) is paying any attention to this thread anymore (and the HP Slate 7 Extreme at this point is a fairly old device) ... but I can't get any of these methods to work and my S7E (model 4450) is basically useless right now. When cold (i.e. not booted up in prior 30mins or so), I can boot it normally, but within about 10mins, it will "crash" to the all-white HP splash screen and will never recover. Holding the power button just has it go through initial startup, get to the white HP splash screen, and sit there until the battery runs down. I haven't been able to root it yet, so the bootloader still shows "locked". What's ironic is that this device is really all I need -- I don't play high-end games and mostly just stream shows -- but now it's completely unusable. I'm not sure which is easier ... trying to get this to root or just buying something else?
So far, to root, I've tried towelroot and Cydia Impactor, but both of those returned errors as others have reported. I tried following the steps that Mike S put up here, but without my tablet being rooted, adb and fastboot don't even detect my device from the PC (though the PC detects it because I'm able to see it in Windows Explorer and drag files to the storage) ... so it seems like I can't even get to install CWM or anything further.
Maybe the right thing to do is just to dump the paperweight ... it used to work so well but about 6 months ago this stupid HP white screen crash started happening, and since then it's become a regular thing that only takes about 10 mins (at most) before it craps out. I can get to the bootloader and onboard recovery mode, but that doesn't let me load anything.
Not sure where to go next but any advice would be appreciated!
--AJ

MGrad92 said:
Mike S ... not sure you (or anyone else) is paying any attention to this thread anymore (and the HP Slate 7 Extreme at this point is a fairly old device) ... but I can't get any of these methods to work and my S7E (model 4450) is basically useless right now. When cold (i.e. not booted up in prior 30mins or so), I can boot it normally, but within about 10mins, it will "crash" to the all-white HP splash screen and will never recover. Holding the power button just has it go through initial startup, get to the white HP splash screen, and sit there until the battery runs down. I haven't been able to root it yet, so the bootloader still shows "locked". What's ironic is that this device is really all I need -- I don't play high-end games and mostly just stream shows -- but now it's completely unusable. I'm not sure which is easier ... trying to get this to root or just buying something else?
So far, to root, I've tried towelroot and Cydia Impactor, but both of those returned errors as others have reported. I tried following the steps that Mike S put up here, but without my tablet being rooted, adb and fastboot don't even detect my device from the PC (though the PC detects it because I'm able to see it in Windows Explorer and drag files to the storage) ... so it seems like I can't even get to install CWM or anything further.
Maybe the right thing to do is just to dump the paperweight ... it used to work so well but about 6 months ago this stupid HP white screen crash started happening, and since then it's become a regular thing that only takes about 10 mins (at most) before it craps out. I can get to the bootloader and onboard recovery mode, but that doesn't let me load anything.
Not sure where to go next but any advice would be appreciated!
--AJ
Click to expand...
Click to collapse
Get your device drivers right (try androidsdk if it's still not getting recognised) and fastboot the stock system images (fastboot is not root dependent). By the way why were you trying those weird rooting methods ??? Just flash supersu from cwm/twrp and be done with it.

Thanks ... I'll try androidsdk. I actually am a root n00b and so I was trying to figure out the simplest way to go. I guess I guessed wrong! But of course before I can get that working I need the right drivers ... So I'll try that first. I was thinking the drivers were OK since my PC recognized the S7E when Android loaded (before it crashed to the white screen).

Couldn't get androidsdk to work
Hello again... I never could get androidsdk to work. My computer never recognized the tablet to be able to fastboot. *sigh* As much as I hate to give up, I don't know what else to do.... I might try another PC?

Looking for update.zip for S7E
mike-s said:
I didn't have any luck doing it this way. I ended up getting there by a slightly different avenue.
My s7e was totally non functional beyong fastboot and recovery mode being operational. I ended up downloading tegratools 2.2. Using the fastboot included in that I unlocked my boot loader with fastboot by the command
Code:
fastboot -i 0x03F0 oem unlock
(The '-i 0x03F0' is a code relating to the specific model, apparently without this the tablet will ignore your command. Please also remember that the unlock factory resets the tablet.)
It may be overboard again, but I also formatted all the system partitions
Code:
fastboot -i 0x03F0 erase boot
fastboot -i 0x03F0 erase system
fastboot -i 0x03F0 erase userdata
fastboot -i 0x03F0 erase cache
fastboot -i 0x03F0 erase preinstall
fastboot -i 0x03F0 reboot
I uploaded cwm recovery from the above version of tegratools to my s7e as it seems a bit more forgiving with signatures than the stock recovery. I used that to upload a version of update.zip with the "assert" lines removed from META-INF\com\google\android\updater-script. I also self signed the .zip to reduce the likelyhood of my upload being rejected by the tablet, it may not be needed, but I did it anyway.
Code:
adb sideload slate7update-signed.zip
when completing the firmware flash, apparently there is a common problem of the kernel not flashing correctly when recovery takes place and giving an "Error 7", this is the problem I think you solved by re-writing the unmodified firmware (but that didn't work for me)
Anyway I had to fix it by dropping back to fastboot and flashing it to "staging", which puts the kernel in a placeholder until the next boot, at which point the kernel will be written to the correct spot. Because of this writing to the correct partition, you will notice a quick double-boot as the updated kernel is written to the correct point in firmware.
Code:
fastboot -i 0x03F0 flash staging "c:\fastboot-s7e\blob"
I hope this helps.
Oh and to those curious, the beats version appears incompatible with the standard s7e, I tried modifying a rom in the same way as above and it just went to a blank screen. My guess is they've done some form of sanity check in the kernel, given that every "beats" version I've read about in tablets has been a software-only modification. I've not bothered trying to use the beats version rom with the s7e kernel, I'll leave that for someone else to try in greater depth as I'm just happy that I got everything working again.
references:
Fastboot: This is a copy of the twrp/cwm roms as well as fastboot & adb taken from tegratools 2.2 mentioned above.
SignApk: The java files and self signing certificate I used to sign the .zip file. It was actually a bit of a pain to find a working signapk.jar that had the valid certificates included, most were broken in one way or another when trying to sign on ubuntu 12.04.
slate7update-signed.zip: A signed copy of update.zip with META-INF\com\google\android\updater-script modified to remove the assert validation lines sanity checks, be careful with this, you could nuke your tablet if you use it on an incompatible bit of hardware.
guide.txt: A full how-to with a number of things I've omitted from this response.
To those wondering, I collated the above procedure from a dozen different links on a good four or five websites, including a number of threads here on XDA. Thank you to anyone out there that contributed to the information I found, you really made my day so much better in being able to recover my tablet.
Click to expand...
Click to collapse
Hey Mike, you wouldn't still happen to have that signed update.zip since you've don't have it on Dropbox anymore?

Bricked while trying to install Full Android rom.. Now Boot loop into twrp. Pls help.

Well,
basically subject says all.
I tried to install zulu99 Full android rom 2.1.
basically 'fastboot flash system system.img worked' but 'fastboot -w' failed ('no space left' error).
So I rebooted hoping to reflash a nandroid backup but now the box keeps on rebooting into twrp trying to wipe cache and data but failing. after a while it stops and black screen appears.
I attach the screen it presents when reboots.
Please tell me I didn't trash 220 euros.
Thanks.

puppinoo said:
Well,
basically subject says all.
I tried to install zulu99 Full android rom 2.1.
basically 'fastboot flash system system.img worked' but 'fastboot -w' failed ('no space left' error).
So I rebooted hoping to reflash a nandroid backup but now the box keeps on rebooting into twrp trying to wipe cache and data but failing. after a while it stops and black screen appears.
I attach the screen it presents when reboots.
Please tell me I didn't trash 220 euros.
Thanks.
Click to expand...
Click to collapse
Theres a hardware method to boot into the bootloader, this i think you can test, just to see if you can at least get into bootloader.....nothing more
Details in the official nvidia link
http://nv-tegra.nvidia.com/gitweb/?...ob_plain;f=README_SHIELD;hb=rel-22r18-partner
There's a thread here on the "questions" thread with users reporting that the timing of the hardware method can be a pain in the you know where.............might be worth looking into that thread for their experiences in booting the bootloader using the hardware method
Disclaimer:If your brave enough to risk a brick, read on
I suspect this might be the 2.1 stock/twrp issue........current twrp, or current stock dont play nice
Its a good sign that SOMETHINGS loading, rather then NOTHING booting, but dont know if theirs a solution
My analysis of the situation, of what little i know, the -w (wipe) command was expecting a stock recovery but instead got twrp, which is why your in this situation.........maybe, i stress maybe, if you could reflash stock again, you might be able to boot into android stock again and try full android again, leaving out twrp, until a twrp fix is found
Edit
Saying that, if the bootloader is, as i suspect, now using twrp to flash things, then you might be boned....... im no expert on bootloaders, stock "recoveries" and how they work, so i might be wrong on that
Reports around here say that 1.3 stock firmware is the recommended back to stock firmware, apparently, flashing any other firmware versions, bring their own issues.............
From 1.3 stock, use nvidias official OTA to upgrade from 1.3 stock, to 2.1 stock, then try 2.1 full android again...........note, i dont think you can skip firmwares i.e. you have to upgrade to 1.4, then to 2.0, then to 2.1, alot of downloading.......the OTA does'nt give you any other choice
Before doing anything that ive suggested, wait till someone with more experience to come along........i dont want to be responsible for you fully bricking your shield..........just wanna give you an idea of what i think has happened
If worse comes to worse, if you have warrenty, get a replacement
Gd luck........remember, this is an analysis of your predicament of what i THINK might of happened, and what steps, i likely might of entertained.......after looking into it more thouroughly, knowing that i could get a replacement if it went downhill.........so your mileage might vary
Edits
Crappy grammer, further musings, clarifications

Thanks.[/QUOTE]
puppinoo said:
Well,
basically subject says all.
I tried to install zulu99 Full android rom 2.1.
basically 'fastboot flash system system.img worked' but 'fastboot -w' failed ('no space left' error).
So I rebooted hoping to reflash a nandroid backup but now the box keeps on rebooting into twrp trying to wipe cache and data but failing. after a while it stops and black screen appears.
I attach the screen it presents when reboots.
Please tell me I didn't trash 220 euros.
Thanks.
Click to expand...
Click to collapse
I had something similar about... shield goes booting in recovery and trying delete some cache and keeps repeat and repeat
Hardware boot in fastboot / bootloader mode
Accessing Bootloader via Hardware
Unplug power from the Shield Android TV. *
Wait a few seconds.
Hold down the power button.
Plug in power
Count to three
Release the power button
You should see the bootloader screen.
If you hold it down too long or not long enough, it simply doesn’t work.
Restore Shield Android TV to Stock
P.s. Personally me I followed this instructions and kind of magically got it in bootloader mode. First done by instruction and then just gave up and pressed randomly and fastboot screen appear. Thanks God I had to done only once, if I would do again I wouldn't had patients
Good luck with this, hope you will get sorted
Here will be link about where I got instructions about hardware boot
http://nvidiashieldzone.com/index.php/shield-android-tv/root-shield-android-tv/
Sent from my Nokia 3310 using free xda app

Thanks a lot fro your help.
I was able to put the box in fastboot mode.
Since I'm not that expert can you tell me where and which rom I have to download (I have a french 16gb version of the box).
Then I'd need to know exactly what commands to performs (even a link to a tutorial is fine).
I really appreciate your help. It seems I can (hopefully) save the box.
EDIT: The fastboot command gave me a (not enough space) when I bricked the box. Is there a risk it could happen again while flashing stock? No idea how much space I have left on the box really.
EDIT2: I found this page: https://developer.nvidia.com/shield-open-source
and I'm downloading this rom called nv-recovery-image-shield-atv-upgrade2_1.zip
and Intend to follow these instructions: http://developer.download.nvidia.co...TV/Upgrade-2.1/HowTo-Flash-Recovery-Image.txt
Can anyone please confirm I'm doing right?

EDIT with joy : I followed all the steps using that rom and it seems everything worked. I reconfiguring the box now. Thanks for help.
basically the procedure I intend to follow is this part (please confirm it's ok):
To flash this recovery image to your SHIELD, run the following commands from
the directory where you extracted the recovery image package. If this is the
first time you have done this procedure, you must unlock the bootloader. Get
DTB file name to use for flashing for your product(see below):
P.s. maybe Since past fastboot commands failed and I only flashed system from zulu99 I could skip the 'fastboot flash boot boot.img' command so if it fails again I still can attempt the fastboot process again?
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash staging blob
fastboot flash dtb <DTB file name>

puppinoo said:
Thanks a lot fro your help.
I was able to put the box in fastboot mode.
Since I'm not that expert can you tell me where and which rom I have to download (I have a french 16gb version of the box).
Then I'd need to know exactly what commands to performs (even a link to a tutorial is fine).
I really appreciate your help. It seems I can (hopefully) save the box.
EDIT: The fastboot command gave me a (not enough space) when I bricked the box. Is there a risk it could happen again while flashing stock? No idea how much space I have left on the box really.
EDIT2: I found this page: https://developer.nvidia.com/shield-open-source
and I'm downloading this rom called nv-recovery-image-shield-atv-upgrade2_1.zip
and Intend to follow these instructions: http://developer.download.nvidia.co...TV/Upgrade-2.1/HowTo-Flash-Recovery-Image.txt
Can anyone please confirm I'm doing right?
Click to expand...
Click to collapse
You are on the right way with those links
P.s. You can do manual one by one entering or paste and copy those commands or (I'm doing) drag and drop file "flash-all.bat" on cmd previous opened there where you have abd/fastboot etc files and extracted RIGHT FIRMWARE (like shift and right click mouse "open command prompt here"
And after this all sit down and relax
Anyway you are on the right way.
P.s. Hope you download adb fastboot drivers somewhere from Internet !?!
Sent from my Nokia 3310 using free xda app

[RECOVERY] TWRP for Onn Android Tablets (unofficial) - 2019-11-30

TWRP Custom Recovery for the Onn Android Tablet series​
This is the first fully-featured custom recovery for Walmart's MediaTek-based Onn tablets: ONA19TB002, ONA19TB003 and ONA19TB007. TWRP needs no introduction. If you have come here, you probably have some idea of what it is and what it's used for. This TWRP build does not need the bootloader unlocked or VBMeta verification disabled, although it's recommended that you at least unlock the bootloader.
DISCLAIMER
Everything described in this thread is done at your own risk. No one else will be responsible for any data loss, corruption or damage of your device, including that which results from bugs in this software.
FEATURES
Decrypted data partition
All USB modes functional: MTP, ADB, Mass Storage, OTG, Charging
Fast boot time
Adoptable storage mounting
Firmware image backup and restore
Works under locked bootloader
Android 9 build fits within the 16MB recovery partition -- no compromises or partition resizing necessary
INSTALLATION METHOD 1
Download the recovery to your PC and unzip the image
Unlock the bootloader (skip if you have already done this)
Enable OEM Unlock in Developer Options in Android Settings
Boot into fastboot mode either by holding vol. up+power to power it on and selecting "Fastboot mode", or by running the 'adb reboot bootloader' command from within Android.
Install fastboot and appropriate drivers on your PC if you have not set those up
Unlock the bootloader with the command
Code:
fastboot flashing unlock
...and follow the instructions on the screen. This will wipe your data.
Flash the custom recovery with
Code:
fastboot flash recovery twrp-3.3.1-ONA19TB002.img
(use the right file name path for your device)
Reboot to recovery with
Code:
fastboot oem reboot-recovery
INSTALLATION METHOD 2
This assumes you are familiar with SP Flash Tool or can figure it out on your own
Download the recovery to your PC and unzip the image
Get the appropriate scatter file for your device. The scatter file may be found in the device's firmware under /system/data/misc.
Set up SPFT Download tab as Download Only. Load your scatter file.
Under the recovery line, double-click Location and open your TWRP image.
Click Download and connect your powered-off tablet to your PC. SPFT will automatically flash the recovery to the emmc and disconnect when finished.
INSTALLATION METHOD 3
Head over to Amazing Temp Root for MediaTek ARMv8, read the requirements and directions, and grab the latest mtk-su.
Open a root shell with mtk-su
Flash the (unzipped) recovery with the command:
Code:
dd bs=1048576 if=twrp-3.3.1-0-ONA19TB002.img of=/dev/block/by-name/recovery
(replace the if= file name with your appropriate recovery image path)
Exit root shell
START RECOVERY
Three methods:
On a powered off tablet, hold Vol. up+power for about 3 seconds. In the menu that appears, select "Recovery mode"
With Android ADB, use the command 'adb reboot recovery'
From Android root shell, use the command 'reboot recovery' or just use any root app with OS reboot features
NOTES
Kind of important: Make a backup of your Crypto Footer as soon as you can. This is the encryption key to your data partition. When accessed from TWRP, this key can get "upgraded" so that you will get locked out of Android. TWRP uses a hacky workaround that saves and restores the original footer on every /data decrypt. But that method is not what I would call 100% reliable.
Make sure you have a backup of the untouched stock system and vendor images. There are no official firmware packages available to download.
Only mount system/vendor partitions in read/write mode if you have unlocked the bootloader. It is recommended to choose to leave system read-only at the startup prompt unless you have a specific reason to modify it. If the bootloader is locked, then dm-verity is enforced.* So merely mounting it once in r/w will cause a boot loop.
It's currently not possible to install incremental OTA updates using this TWRP. Use the stock recovery to update the FW. That will only work if you have never mounted system/vendor in write mode.
DOWNLOAD (Nov. 30, 2019)
Current version: 3.3.1-1
ONA19TB002 - Onn 8" model
ONA19TB003 - Onn 10.1" model
ONA19TB007 - Onn 10.1" w/keyboard model
Source code
ONA19TB002 | ONA19TB003 | ONA19TB007
ACKNOWLEDGEMENTS
The team behind TWRP & OmniROM
@tek3195 for testing and feedback on the 8" model

Please post feedback since these are still pretty new and not exhaustively tested. Let me know if I should port it to other models in the series.

Reserved also

grabbing this one too cuz why not

Very nice! I'll download and test the 003 one soon.
I also have a 007 model to experiment with.
I tried about a dozen times to build TWRP and failed miserably LOL. Closest I got was one that would boot but the rotation was all messed up, USB wouldn't work, didn't mount some partitions... Yeah, it was a hot mess.
Do you happen to have sources available?

Hi @NFSP G35,
I'll have the source code soon. Most of the tricks involved patching bootable/recovery. So I need to commit those changes and include the proper patch set from my tree....

Amazing!! Gonna install and test 8" right now.

Has anyone tried a GSI on these tablets yet?

MishaalRahman said:
Has anyone tried a GSI on these tablets yet?
Click to expand...
Click to collapse
I do know @tek3195 , the Onn 8 thread starter, has tried many of them as well as others here, somewhere on that thread he listed his tests and opinion of several of them.
I'm pretty sure others on that thread have also tried GSI's.

MishaalRahman said:
Has anyone tried a GSI on these tablets yet?
Click to expand...
Click to collapse
I did try both Phhuson vanilla and also Liquid Remix (I'm keeping this one for now). I didn't flash them through twrp, but using fastboot via bootloader.

WoW! AwEsOmE! I cannot wait to try this! THANK YOU!!!!!!

Hey,
This is a neat thing to see for the Onn tablets. I have a question though. I own a device based on the mt8163, and am trying to help people with another device I don't own (the powkiddy x18 which also uses the mt8163). One of the things I wanted to do was to make a custom rom for the x18, since it's stock firmware is horrible. And of course, one of the first steps to custom roms is twrp. So I have a question for you that I hope you can answer for me. How did you make this build of twrp? I have seen no device trees for this device so I was kinda curious. If you can help me in any way, I'd be so grateful, and I'm sure the other people with the x18 would be grateful for help.

@diplomatic
Is there a different procedure for installing TWRP on a locked bootloader?
I can confirm that using SP Flash to load your TWRP.img will produce a bootloop when installing to a device with the BL locked. Reflashing the original recovery.img makes the problem go away. You mentioned in the OP that this TWRP will work on a locked BL so I thought I would share my case study with you in following the procedure you defined.
MY SINCERE GRATITUDE FOR YOUR EFFORTS IN PORTING THIS TO THE ONN!

You're welcome, @Spatry.... Can you describe how you ended up with a locked BL? Was it unlocked before? Have you ever tweaked vbmeta? Also, when you say bootloop, do you mean for Android or just for recovery? I'm not going to insist that it works under locked BL. I tested it once and it did boot up...

diplomatic said:
You're welcome, @Spatry.... Can you describe how you ended up with a locked BL? Was it unlocked before? Have you ever tweaked vbmeta? Also, when you say bootloop, do you mean for Android or just for recovery? I'm not going to insist that it works under locked BL. I tested it once and it did boot up...
Click to expand...
Click to collapse
Presently, I am running stock with Magisk patched BOOT on locked bootloader, stock vbmeta. The boot loop was at the ONN Android screen, I could not get it to even boot into recovery.
At one time I did run with the bootloader unlocked (with --disable-verification on stock vbmeta) and I ran Phusson's AOSP, Liquid Remix and Bliss. I found there was no benefit to me in running the other mods so I reverted back to stock courtesy of @CaffeinePizza and the bootloader re-locked to get rid of that annoying 5 second orange state.
In each instance, I always used SP Flash tools to load all .img files. I only used fastboot to install magisk_patched.img onto the stock installation. Unlocking the bootloader erases all data and I did not feel like reinstalling everything again, so I figured I would try to install TWRP per your instruction to see if it would work while the BL was still locked... Restoring the original recovery got rid of the bootloop. I do want to try your TWRP so I will try it with BL unlocked when I get some free time to do so.

Spatry said:
Presently, I am running stock with Magisk patched BOOT on locked bootloader, stock vbmeta. The boot loop was at the ONN Android screen, I could not get it to even boot into recovery.
Click to expand...
Click to collapse
This sounds like you might have flashed a wrong/corrupt image to recovery. It may have to do with AVB checks rather than bootloader lock. But those conditions might be interdependent somehow so I can't tell you for sure. The fact that you are able to boot a patched image on a locked BL says it doesn't care too much about verification. I can tell you for sure that any recovery image must have avb metadata, not necessarily the required hash, for both Android and recovery to boot. Can you try to unzip the image file and flash it over again?

Hmm, the situation with the bootloader lock sounds eerily similar to the Nabi SE. The latter also had a similar implementation where there's not much in the way of locking things down, other than an (easily circumvented) SP Flash Tool signature check and different preloader keys. And here's the real kicker: the nearly-identical Fisher Price Nabi also ran on the MT8163, so it makes me wonder if it's possible to boot Pie on it, or perhaps a GSI assuming that Treble can be tacked onto it.
Also, do you have the source repo to this TWRP port of yours?

If anyone here gave me an XDA ad-free subscription, thanks a lot! I didn't get a notification of who it was. Using this site is a lot more bearable now.

diplomatic said:
If anyone here gave me an XDA ad-free subscription, thanks a lot! I didn't get a notification of who it was. Using this site is a lot more bearable now.
Click to expand...
Click to collapse
Where do I find crypto footer to backup

diplomatic said:
If anyone here gave me an XDA ad-free subscription, thanks a lot! I didn't get a notification of who it was. Using this site is a lot more bearable now.
Click to expand...
Click to collapse
Kinda cool without the ads isn't it. I know I sent one about a week ago or so. I think everybody ought to send you one, you deserve it. THANKS and AWESOME work.