Can anyone PLEASE help??
My partner opted to do a suggested update on her S5, but didn't notice the wifi was off. The phone seemed to have done the update, but shortly after it rebooted itself, then again, then again. The frequency of reboot got quicker and quicker and now it loops between the Galaxy S5 splash screen and the SAMSUNG logo, but doesn't go any further.
I managed to boot the phone into reset mode, cleared the cache and then did a factory reset, but that did nothing to prevent the boot loop.
I then downloaded Odin (ver 10.3.7) and what I believed to be the correct firmware (G900FXXS1CPLV_G900FVFR1CPJ1_G900FXXU1CPIW_HOME.tar.md5).
Having checked the battery was charged, I followed the instructions of connecting the phone via USB, loading the md5 in the AP, checking Auto Reboot and F-Set time in the options and clicking the Odin Start button. I had removed the battery, replaced it and then booted it into the update mode (Power, Home, Volume Down, then volume up) with the screen confirming I was in the right place (....do not unplug.... etc).
The file loaded, (green bar at top of the Odin window on my PC) and Odin reported success. I then disconnected the phone, booted in recovery mode, reset the cache and then did a clear data, factory reset.
The same symptoms prevail, STUCK IN BOOT LOOP!!!!
The only thing different is that if I plug it into the USB on my PC, after a while the phone tries to turn itself on and goes into either a boot loop or freezes on the Galaxy S5 Splash screen or the SAMSUNG Logo.
I am charging another battery (just in case that is in some way to blame) and will try again to replace the firmware, but could I be missing something, do I need to do anything with PIT (I thought this was all taken care of by Odin using the MD5 file) or is there some other test I can perform that will show if the phone is fried???
MANY THANKS for looking!
ur going correct, try to reflash it again through odin and dont disconnect phone until it boots into system, it is taking some good time, so just wait and dont do anything this time like clearing anything or restoring. i hope ull get success.
THANKS - but...
Thanks Rayzen, I will try the whole thing again, but I think there is something more to this than a firmware fault!
There and gone again
OK, so on the 4th attempt I got the phone to take the firmware using Odin, it reported success and the phone rebooted itself (several times) and eventually appeared to boot to a new factory reset.
I put in a SIM card and entered my email and google account details and left it charging over night. This morning when I tried to use it, the screen froze and then it rebooted itself. Hey presto, the phone is back to square one with a boot loop.
ANYONE (please) got any suggestions?
THANKS
No one??
same here, same symptoms, same feeling.
when flash gone right... i feel lucky.. but for half hour only, rebooted and angain in boot loop.
I cannot even boot in recovery. flashed TWRP. from 5 boots in recovery only 1 success.
When trying to wipe phone in TWRP - it hangs.
still trying to install some other (custom) rom. still no success.
hope never dies
same things happened here! now cant get samsung galaxy s5 to boot...............
Are you sure your using right firmware? as it took me a few versions before it booted last time this happened?
Could any please confirm what is the right firmware for samsung galaxy s5 900F
It took another 6 or 7 attempts, left it over night and was about to trash it when it booted.
I then received a 'software update available' message and tried installing it. First attempt put the phone back into boot loop so I reflashed it again using Odin.
That worked immediately the over the network software update installed and now phone is 100%
Very frustrating but I got there!
glad you fixed it! ive tried three different firmwares and still nothing.
trying this one atm
G900FXXU1ANE2_G900FEVR1AND1_G900FXXU1ANE2_HOME.tar
oh and how long do they take to boot when there are sitting at the samsung glowing screen?>
I'm in UK and used what (I had to guess) was the best firmware.
I'll let you know which version it was when I get home tonight.
BUT I had all the problems with a single version and it eventually came good.
I read somewhere that overwriting a different core (from specific providers) with generic firmware, could lead to a world of pain until it gets full replaced... not sure if that's a good description (or has any fact to it) but it seemed to be re-loading and re-loading and re........ for ages, finally cracked it.
well mines booted now!but getting constant errors about samsung push!
If it'still booted, you'very made progress!
Push issues are mentioned elsewhere and can (eventually be sorted) but if you have a booted phone you should be able to get an over the air software update installed from the service provider....?!
Hello guys i have a strange problem. i am using my s7edge for over a year (finally was in batman rom).
After updating to marshmallow i encountered this problem where sometimes rarely my phone reboots (reboot- - show samy logo - then reboot). sometimes after few reboots it will comeback and some other time. i need to wait till it discharges fully and charge it it comes back. (but its so random though. totally happened 3 - 4 times last year)
from last week it happened quite often once a day and from yesterday it keeps rebooting in logo no matter what i do. when this happens only download mode is accessible and twrp recovery is not accessable at all. so i waited till it discharges fully but that does not help.since download mode is accessible i used Odin and flashed stock firmware, still the same result(tried several times). its just keeps rebooting in logo even after flashing with stock firmware via Odin and i have no more options to go for. is my device hard bricked? any more options i can try??? my final hope is someone here will help me.:crying::crying:
Thank you
Oh! I just posted a similar question. After several tries, I sorted out a way to make it boot:
1) With the latest samsung drivers on my notebook, I've downloaded the latest Odin (Odin3_v3.12.3) with this stock rom from sammobile (G935FXXU1DQJ4_G935FUUB1DQJ4_ARO). According to this page this rom works in Argentina and the ARO means it is used on unlocked devices. Then it has no bloatware or any company logo.
2)Charged it for a few minutes until it reached 2~3%. Vol Down + Home + Power (in that order) and entered 'Download mode'. Then plugged it into the pc.
3) Opened AP, BL, CSC and CP files, then flashed it. Once it restarts, try to get it into recovery mode with volup+home+power and charge it. I used a power bank. Then wipe cache and factory reset. Then reboot to system and let it loop until it gets into the OS.
The one I've got in quarantine is working smooth.
So, I rooted and tried flashing the stock ROM (from Sammobile, same country, same exact model [SM-G950F], I already had the stock ROM and had never flashed anything else to the phone other than root, June security update, my phone had July's) to see if I could fix a problem that couldn't be fixed with any other method I had tried.
Everything in Odin seemed to go well, I got the PASS green box at the end. But then the phone couldn't go pass the Samsung logo when booting up. I left it quite a few minutes, before trying to boot into recovery mode and wiping data. Only to realize that I couldn't boot into recovery mode. In fact, I can't even turn the phone off. No combination of hardware keys works other than power button + bixby + vol down, to get into download mode. But that's of no use, because when I plug my phone into my PC (with the same cable and port I used before to root and flash the firmware into it) it is not recognized by Odin or the PC.
It just has the Samsung logo flashing slowly over and over because I can't turn the device off. By the time the battery dies out I'll most likely have the logo burnt into the display.
I also haven't been able to find any help online. Everyone's suggestion is “boot into recovery and wipe data”, but I can't do that.
Is my phone gone for good?
Hi guys!
I've read tons of threads and guides on Google but nothing helped me to bring to life my Samsung Galaxy S8 Plus. After hours and hours of test and probes I surrender!
Basically I was using normally my phone and suddenly has power off and showing the Samsung Galaxy Logo continuously. I've force reboot it with vol down+pwr button and after some minutes restart normally again. After 5min again the boot loop and stuck there. Tried again to power it off but didn't work so I thought was the battery (because is 3yrs old with heavy use and months ago I had the screen flickering and a battery drain to zero). I opened the phone, unplug the battery and the power button (because I thought was the power button stucked as on my father phone). So after mounted all the stuff in their place I tried to boot it and suddenly start to work again! I've backup all my things rapidly but again power off by himself and this is the last time I see it working.
So I tried to empty the cache entering in the recovery but it was useless so the only way seems flashing the original FW with Odin. Downloaded the right one with Frija, upload the rights files in Odin (Home_csc because I don't want to lose my internal memory stuff) and the phone automatically reboots, pass the Samsung logo and go in Upgrading mode with the blue android screen and a % increasing. After that by himself power off and nothing happen.
I read some stuff about my possibilities to recover it without losing data but a lot of tutorial talk about entering in recovery but I cannot do it! Simply does not go in recovery with vol_up+bixby+pwr_button even after force shutdown it with vol_down+pwr_button or reattach the battery. The only thing I'm allowed to do is put it in Download Mode to be recognized by Odin.
I've tried to launch ADB devices but it is not visible in Download Mode.
I've tried to flash another firmware for the same model (theoretically my one is unbranded italian) but I tried with WIND one because in download mode there is a text "Carried_ID:WIND" but this FW Odin fail to upload it.
I've tried to flash the TWRP with Odin but fails on the phone with error "Custom binary(recovery) blocked by FRP Lock". I've searched how to unlock it but without have access to recovery or phone settings seems impossible. And this phone has also OEM Lock.
I've tried again to flash the FW but the only difference than before was the blue android robot with stucked text "Installing system update", "Erasing" , "yellow advice notice" and finally a green screen with "An error has occurred while updating the device software.Use the Emergency recovery function in the Smart Switch PC Software". And yes, I already tried with Smart Switch but the program does not detect the phone.
I've also tried to flash the original recovery but nothing change.
Seems that my devices is bricked or a kind of boot loop.
In my situation there is something that I can do to recover the internal memory data? I don't tried to flash the FW with CSC file because I don't want to erase all the data.
My Galaxy was original since the purchasing, no root or flashed a FW, only OTA updates.
I've attached a photo with the stuff that appear in Download mode.
My device restarted and after a software update and got stuck on a boot loop. I was able to get the phone initially into download mode as I thought I would try flashing it with ODIN back to the previous firmware. But since I haven't been to Sammobile in years, I didn't realize that the download would take hours.
So i tried force rebooting the phone again (vol down+power) in the meantime and nothing happened it was still stuck on the boot screen. So I left the phone connected to the charger and after a while I saw that it was back in downloading mode (but no ODIN mentioned in the top left corner)? I thought that was strange and since I had the download ready to flash, thought to make sure it was in download mode (proper) by pressing power+vol down+home. But this time the screen went black and now seems to be hard bricked and completely unresponsive (with only the blinking blue led) -. I've scoured the interent and the consensus seems to be that a USB jig won't work, will try it though. I'm really looking for an unbrick image to try booting it from the SD card. Would really appreciate the help! I've already tried the adb reboot download etc, but my computer and another one doesn't seem to detect the device. Please help!