Related
I have used my x1 for four months in America with T-mobile. The phone had no problem until yesterday. However, yesterday, the phone began to lose signal and automatically rebooted several times. Then, finally, from the afternoon, the phone totally lost the signal, and kept looking the signal.
I took out my sim card and plugged into another cell phone and it worked. So, I thought it was the problem of the rom. (I was using Touch-IT 4.5) I downloaded the new version of the rom, Touch-IT 5.6, then flashed it. However, it did not solve the problem. So, I flashed with the original SE rom. However, the phone didn't work either.
I contacted T-mobile, and there was not problem on the signal on my region. I thought it might the problem of data plan since I do not use data plan. So I used Advanced config and killed every option for data plan. However, it still does not work. I tried to do settings manually. changing band, carrier, and every possible options, but it does not work.
Interestingly, the phone worked two times today for a short amount of the time. However, after the reset, it is gone. Other than phone function, I do not see any problem.
Even now the phone keeps searching the signal. What can I do? I read another article that is similar to my case, and they say even after changing the sim card, it does not work.
Anyone has the same issue? What can I do? My phone is dead for two days, and it messes up so many things. Please somebody help me.
Have you tried redoing the connection setup?
try clicking on signal antenna then enter settings click on network and manual select your network, will take a few mins to find networks if it connects manualy just select auto again and hopefully it will fix it., worked with mine.
Thank you guys
Thank you guys. Yes, I have tried both of them, but it still does not work.
In Connection setup, I chose United States and T-mobile, and the screen to choose between T-mobile and At&t. I select T-mobile, and click Register. Then, it goes to the searching mode again, and nothing happens.
I assume that somehow, the phone finds networks, since it does show the options to choose (T-mobile, At&t). But something is not right, and it messes the set up. I do not know why.
Hi All,
Please help. I'm a rookie at rooting and have an unlocked Japanese Note 3 through AU (my Japanese service provider). I was in a rush and paid someone to unlock it before heading back to the States last year. The phone works with my AT&T sim card but when I am back in Japan (with Japanese sim) I am constantly being dropped from the network. 4G service usually works for internet, etc, but I cannot make/receive phone calls and only occasionally can send/receive text messages. I need to know if I should re-root the phone (and leave it rooted) or just do a factory reset (or perhaps change some other setting to get things working again)? The problem with a factory reset is that it will probably re-lock the phone and I don't have a code.
Strange Detail:
Whenever I try to dial a number, the name of a Chinese Province shows up under the Contact's Name. This suggested to me some network issue where the phone somehow thinks it's in China (though texts still kinda work...) and doesn't connect correctly to the Japanese network.
Details:
Model: sm-N900J (per the download screen) i believe this means it has a SnapDragon Processor
Knox warranty has been tripped (apparently by the guy I paid to unlock it originally - is that bad?)
Android 4.3 (looks like I'm still in the original version of Jellybean. Should I upgrade to Kitkat or Lollipop?)
Other Issues:
As of two days ago, the phone now restarts after about 5 minutes of use. Like many Note 3 phones, it's always done the occasional random restart (another reason to root?) but now it's making the phone almost unusable. Also, since having the phone rooted/unlocked/re-rooted I always get a series of warnings upon start-up. Typically, standard Samsung apps like S Planner, Calendar Storage, Keyguard and Index Service have stopped. I have never been able to use the Calendar (or other basic apps) since it always crashes. Is this an issue with Knox clashing with something from the original root (I still see SuperSU loaded -but "turned off"- in the apps menu)?
Idealy...
...someone can help me decide the best course of action (Root, Reset, Other), and how to make sure I can connect back up to my Japanese network properly. I think I'd prefer to root since what I want is an unlocked phone that works smoothly, with good battery life, little to no bloatware, a custom theme and a working S pen. If I root, what's the best method (already have SuperSU apparently) and which ROM and version of Android would be the most stable?
Main Issues Recap:
No connection to phone network (or limited 4G internet).
Phone restarts every few minutes.
Many Apps crash upon Start-up.
Thanks in advance!
So, here's an update that someone with a similar problem might find useful...
Japan uses CDMA for voice and GSM for LTE Data. Somehow (probably through using my phone in the states on a GSM network) the phone was no longer connecting to the CDMA network. Since I'd gotten no responses and felt like there was a good chance that a factory reset would not reverse the sim-unlock I'd stupidly paid to have done, I did a factory reset. Despite appearing to have solved my Index Service, Calendar Storage, S Planner crashing issues, I was still having the exact same problem of LTE working but no CDMA network.
Somehow I stumbled on to this website...(well, I'm unable to post as a new user but searching for "How To Fix Samsung Galaxy error while searching for network" should bring it up).
There, I found some really odd directions that solve network error issues. The only part of the instructions I was really able to carry out was take out the battery and simultaneously press the home and power buttons 10 times. I restarted my phone and miraculously was able to place a call for the first time in a year in Japan!
But then I no longer had any data. I figured it had to do with the APN settings being wiped in the strange reset I just tried. But when I went into Settings>More Networks>Mobile Networks there was no longer an Access Point Names option in the menu. There is no longer a "Network Mode" option either. I used to have that set to LTE/WCDMA/GSM but now I only see a System Select option that simply lets me change my CDMA roaming mode from Automatic to Home Only.
I tried searching everywhere for the missing Access Point Names menu to no avail (and almost attempted to try flashing CyanogenMod for the time hoping this would bring back the APN settings menu) but then I realized that I could do a search in the settings app. I searched APN and the option came right up (though it's frustrating that this now appears to be hidden). Using the following settings (copied below) from the AU by KDDI website I created a new APN profile. Now mobile date appears to be working just fine too!
So, now I just need to decide if I want to keep running Touchwiz in Jellybean or use my new found confidence to try rooting and custom roms...
I'm also kind of curious to see that the next phone bill comes in as expected and I'm not being charged for a bunch of crazy usage! Also, any suggestions to help explain how I got into this problem in the first place, or how to clean up any loose ends would be appreciated.
APN Setting for LTE NET for DATA
APN name au.au-net.ne.jp
User name [email protected]
Password au
Authentication type CHAP
Hi,
Hopefully this is the right place to post, as this account is too new to post in the dev thread.
For the past few days i have been on the latest rom from this thread https://forum.xda-developers.com/v20/development/rom-ls997-stock-debloated-su-goodies-t3531923 (version 4.0HHH) but i cant get any service, be it 3g or 4g (Sprint, LS997). I can text and make calls, however. I've tried everything i can think of and have been searching frantically for help. A list of things i have done so far, to no avail:
wipe data and reinstall rom
update prl
change apn
update profile through sprint zone app
use shortcut master to try to change apn
flash different roms, such as the one found in the dirty santa thread, none of which work
activating my phone by dialing ##873283# - after a while it said my phone was activated, restarted, but then no service
I have been using an app to check up on which networks i'm connected to, and it always says eHRPD. I don't think the problem is that there are no towers in range, because my family members all have 4g lte.
At this point i'm really not sure what else i can do, and any help would be greatly appreciated.
edit - for a bit more info, when i go into settings and try to change the apn all the options are grayed out. the options are: internet, ota, pam, and vowifi, with internet being the only one with a selection circle next to it. thats why i used shortcut master, which was suggested in the devdigitel thread. when i access the apn settings through there, it has 3g_apn, internet, pam, ota, vowifi and a bunch of dummies. i can select 3g_apn or internet, but i dont think either of them make a difference. when i try to make new apns they dont save and i cant select them.
edit 2 - I went back and flashed the sprint stock rom from the dirty santa thread (https://www.androidfilehost.com/?fid=385035244224409782) and then reset the network by dialing ##72786#, then activated it again by dialing ##873283#, and after a prl update and profile update (while connected to wifi) i get 3G on and off and i had 4g lte (for the first time in weeks!) today out in the city. I think the coverage by my house just sucks, but its very frustrating nonetheless. still doesnt seem like a permanent fix, because 3g is very spotty and 4g only lasted for a little bit
rowing the same boat
i am stuck in a similar rut myself. have you had any luck with the problem, OP?
after a successful root/unlock of bootloader and running the stock rooted rom for a few days, I decided to take the plunge and install a custom rom, after my desire for V4A got the best of me. having had problems with modem signal quality in the past, I am out of habit continually checking my signal level. Before flashing the custom ROM, my signal was around -70 to -77 db .. immediately after clean flash of custom ROM my signal level dropped to -117 and lower. when I do see something show up, it is a 3g icon, and then only for a faint second or less. have yet to see the 'LTE' icon show.
I have tried ##72786#, ##873283#, updating prl/profile. deleted via fastboot : system, fota, misc. reboots, reflashes dirty and clean.
still, i yield a totally undesirable (read: not there at all) signal. i have been using Samsung telephones since the Transformer days (pre OG galaxy) and in a situation like this, one would typically have a modem file to flash via 0din. Is there an equivalent to this for LG telephones? I admit my noobishness with the way of doing things with LG, but i am not unfamiliar with adb/fastboot/0din.
Could myself and OP somehow inadvertantly disable a few bands on the modem? is this repairable?
i realize its anecdotal, but still, my signal took a header immediately after flash of the new ROM (i am hesitant to name it, in case someone interprets it as casting shade at another. ) Could this be the reason? Am i missing something really friggin stupid?
Have you found a fix? I'm in the exact same boat.
Hi there!
I had a similar issue with my LS997 as well - I went through all the troubleshooting with sprint, did everything that you've done including installing the stock rom. I was never able to fix it on my own - I had to go to the sprint repair center that was in town, and they used LGup to restore my phone to factory.
The issue that I was having, was that I had data, but couldn't place calls or send texts. When I tried to place a call, it would tell me that my phone was not activated. Texts just wouldn't send. I spent the better part of two days scouring everything that I could find on the issue, and couldn't come up with a solution. It repeated the issue on every rom, every update, everything. This is all that worked for me.
I've decided to keep my phone on stock until we can get our hands on LGup and a stock kdz, since that is what will resolve that particular issue.
Did you come clean and tell them it was rooted? I may have to go in the store today and do this. The phone is almost useless at this point since I can't receive/send calls or texts.
I did come clean, but I carry the nice 13 dollar a month insurance on it. Also been a customer for near 4 years so that helps as well - I didn't tell the rep that I was talking too, I told the tech that was working on my phone. It's my experience that reps care, techs do not. Especially if it's that easy to fix, roughly 15 minutes or so.
Sorry to hear you guys are having issues.
It seems a small hanful of users are experiencing some service issues
Have you tried to do ##brand#
And let it re-activate that way?
I never activated my test device prior to dirty santa and have no idea how it acted before root.
But after root ive been 100% Lte or 3g 1x depending on area. I did have issues that after any rom flash i do need to do a profile update or a ##update# to return service
To be honest. Lte isnt provisioned by the device at all. Its only provisioned by the lte sim card.
If you ##data# and hit view is your ptn and msid present?
If not this is why texts wont work
For data. Ive found you can use the shortcut master and access all the bands for our handests without the msl.. I can get the msl for those who dont have but its not needed for this process.
You use the shortcut master lite app from playstore.. Then go to search and search mobile network settings. Or lte.
Make sure its set to cdma/lte
As well have you confirmed under your settings you have a network set to lte/cdma?
This seems to get unchecked sometimes..
---------- Post added at 06:01 PM ---------- Previous post was at 05:40 PM ----------
For anyone on ls997
[email protected]
My personal support tool using hangouts
Ill be busy tonight but most nights im willing to txt call or video and help with q/a and issues.
I'll give what you suggested a try and report back.
I tried ##brand# and it cleared some settings and rebooted but I still have no network. I did ##data# and went through all the settings and neither ptn or msid are present. Phone is set to CDMA on device settings.
I used Shortcut Master (Lite) and could not find a setting to select CDMA after searching for lte. No search results when I searched for mobile network settings.
To add some information, I live in a very rural area where my phone is always roaming. Today I was in an area where I get LTE so I wiped my phone, flashed the LS997 stock rom and did ##873283#. This enabled data and I got LTE but still no text or voice. I wiped my phone again and flashed your rom, went through the same process and got the exact same results.
Team DevDigitel said:
Sorry to hear you guys are having issues.
It seems a small hanful of users are experiencing some service issues
Have you tried to do ##brand#
And let it re-activate that way?
I never activated my test device prior to dirty santa and have no idea how it acted before root.
But after root ive been 100% Lte or 3g 1x depending on area. I did have issues that after any rom flash i do need to do a profile update or a ##update# to return service
To be honest. Lte isnt provisioned by the device at all. Its only provisioned by the lte sim card.
If you ##data# and hit view is your ptn and msid present?
If not this is why texts wont work
For data. Ive found you can use the shortcut master and access all the bands for our handests without the msl.. I can get the msl for those who dont have but its not needed for this process.
You use the shortcut master lite app from playstore.. Then go to search and search mobile network settings. Or lte.
Make sure its set to cdma/lte
As well have you confirmed under your settings you have a network set to lte/cdma?
This seems to get unchecked sometimes..
---------- Post added at 06:01 PM ---------- Previous post was at 05:40 PM ----------
For anyone on ls997
[email protected]
My personal support tool using hangouts
Ill be busy tonight but most nights im willing to txt call or video and help with q/a and issues.
Click to expand...
Click to collapse
stenomatic said:
I tried ##brand# and it cleared some settings and rebooted but I still have no network. I did ##data# and went through all the settings and neither ptn or msid are present. Phone is set to CDMA on device settings.
I used Shortcut Master (Lite) and could not find a setting to select CDMA after searching for lte. No search results when I searched for mobile network settings.
To add some information, I live in a very rural area where my phone is always roaming. Today I was in an area where I get LTE so I wiped my phone, flashed the LS997 stock rom and did ##873283#. This enabled data and I got LTE but still no text or voice. I wiped my phone again and flashed your rom, went through the same process and got the exact same results.
Click to expand...
Click to collapse
need to set to cdma / lte
pm me or hangouts.
we need to add some settings, or contact sprint care, ask for your msl, and get your msid, you can manually activate it.
Check in about phone under phone number and min ....I lost both and am going to have to get sprint to flash my phone back to stock also
Sent from my Pixel XL using Tapatalk
im writing a fix now guys, we mamanged to get a work around to manual program your devices.
for some awful reason sprint hid the EDIT option to manually program our devices? wtf..
well we managed to do it a diff way. im making a post now to walk everyone who needs to get their phones active and talk/text/3g back.
---------- Post added at 10:59 AM ---------- Previous post was at 10:46 AM ----------
https://forum.xda-developers.com/v20/help/manual-program-sprint-ls997-v20-t3557676
see here for walktrough, working on getting a way to write a prl manually now. Found a setting to do it but i cant get it to show the prls i have on my device.
I have the Moto G4 Play (XT1607) (Harpia) and I have decided to flash LineageOS (lineage-14.1-20170131-nightly-harpia-signed.zip) on it using TWRP v3.0.2 r5. After getting it installed I noticed that it was not connecting to my 4g LTE Internet (I have Ting). So I figured I needed to make some changes to the APN settings. So I go to Settings>... More> Cellular Networks and the moment I click on "Cellular networks" I get an error message saying "com.android.phone has stopped". After reflashing and trying again a few times with the same result, I tried using a completely different ROM. AOKP. (aokp_harpia_nougat_nightly_2017-01-31.zip) and I ran into the same exact problem I was having with LineageOS.
I then tried to see if I could force my way into the APN configuration using an app called "Change APN". This worked, but now I see the message "Access Point Name settings are not available for this user". I decided to ignore this and click on the + to create a new APN. After filling the correct info out for Ting APN, I click on "Save"... and it doesn't save at all.
I decided to revert to the stock rom, and everything works perfectly fine with the stock rom. 4G LTE on Ting works fine. Whenever I try using a custom ROM of any kind, I run into the problem I described above. I don't know if I am forgetting to do something, or completely doing something wrong. I could use some help with this guys.
Isn't Ting a Sprint service? I didn't think CDMA-based networks had APN settings to configure. Verizon and US Cellular have always used *22XXX for programming, as far as I can remember.
mkollersms said:
Isn't Ting a Sprint service? I didn't think CDMA-based networks had APN settings to configure. Verizon and US Cellular have always used *22XXX for programming, as far as I can remember.
Click to expand...
Click to collapse
Yes. Ting is a Sprint service. Well either way LTE isn't working and the 3G keeps randomly turning on and off whenever I use a custom ROM. However, when I use Stock firmware, everything works perfectly fine. I am unsure what is causing the issue.
It seems nearly all custom ROMs at this point are having data connectivity issues. I'm trying to find a nandroid of the original xt1607 rom so I can just go back until its all sorted out.
mkollersms said:
Isn't Ting a Sprint service? I didn't think CDMA-based networks had APN settings to configure. Verizon and US Cellular have always used *22XXX for programming, as far as I can remember.
Click to expand...
Click to collapse
With Ting you can choose to use Sprint or T-Mobile. I am using the T-Mobile side of Ting and you do need to add Ting's APN settings for it to work. I am still on factory ROM but watching closely to see what others are experiencing with custom ROMs.
n76 said:
With Ting you can choose to use Sprint or T-Mobile. I am using the T-Mobile side of Ting and you do need to add Ting's APN settings for it to work. I am still on factory ROM but watching closely to see what others are experiencing with custom ROMs.
Click to expand...
Click to collapse
I haven't noticed any issue with my GSM ting service on lineage. I get LTE and the WiFi/LTE handoff seems to work. I don't install many apps and don't let them run in the background, so perhaps there's a conflict between them that's shutting down LTE service. This is just a guess.
Anyone have any information pertaining to this subject? I've searched hours on hours to no avail. I run U.S. Cellular and on the newest RR-5.8.1-OMS after I go to Settings>More>Cellular Networks>Crash. Every time. Resets my radio and picks right back up again. Everything works until I'm in my house, then I'm roaming and there's no way to manage in settings because of the crash.
I looked around in the file system and in /data/data/com.android.phone/ there is no files, no .db files or anything. I don't know of there's supposed to be either. But like OP stated, stock rom is flawless.
Would I be and to copy com.android.phone from stock and restore after flashing? I don't know what to do but this is with every single custom ROM out right now on every release. Data and everything works fine as far as I can tell but just no way to configure the settings. Any help would be greatly appreciated!!!
[email protected] said:
Anyone have any information pertaining to this subject? I've searched hours on hours to no avail. I run U.S. Cellular and on the newest RR-5.8.1-OMS after I go to Settings>More>Cellular Networks>Crash. Every time. Resets my radio and picks right back up again. Everything works until I'm in my house, then I'm roaming and there's no way to manage in settings because of the crash.
Click to expand...
Click to collapse
Just out of curiosity, have you tried the *22XXX thing yet?
EDIT: Just so we're clear, with you all who have CDMA phones, when you go into "IMEI Information," it does show both an IMEI and an ICCID, right? Because if not, I think I figured out why your LTE isn't working.
I tried, I tried dialing *22999 (guessing that the x stood for the 9 button in T9 language) and pressed the make a call button. Am I wrong about the "XXX" part? Because I did try that when I seen it previously in the thread earlier but had the same thoughts.
So to make that novel a shorter version, what exactly should I dial?
[email protected] said:
I tried, I tried dialing *22999 (guessing that the x stood for the 9 button in T9 language) and pressed the make a call button. Am I wrong about the "XXX" part? Because I did try that when I seen it previously in the thread earlier but had the same thoughts.
So to make that novel a shorter version, what exactly should I dial?
Click to expand...
Click to collapse
It depends on the carrier and the model of the phone. For most Tracfones, it's *22890. For US Cellular, I've seen it as *228 and *22894. You may have to call your carrier and ask what their phone programming code is.
Aaah ok I got you now. Yes I've tried that on nearly every ROM. Matter of fact I just noticed I posted a little off topic almost, but I'm here for the relevance of com.android.phone crashing EVERY SINGLE TIME I try to open Cellular Networks. The only ROM I will say it doesn't force close on is the Slim Nougat ROM, but I don't run that because instead of Cellular Networks settings making com.android.phone crash its when you place a call and then it force closes the UI part of the call but still carries the call through. I forgot to mention that by the way, whatever it is in Slim that is the making the different reason for force closing com.android.phone could probably be a pretty easy red flag for someone better equipped for this Lind of troubleshooting than myself!
Thank you for the suggestion though on the *22(8 in my case)
[email protected] said:
Aaah ok I got you now. Yes I've tried that on nearly every ROM. Matter of fact I just noticed I posted a little off topic almost, but I'm here for the relevance of com.android.phone crashing EVERY SINGLE TIME I try to open Cellular Networks. The only ROM I will say it doesn't force close on is the Slim Nougat ROM, but I don't run that because instead of Cellular Networks settings making com.android.phone crash its when you place a call and then it force closes the UI part of the call but still carries the call through. I forgot to mention that by the way, whatever it is in Slim that is the making the different reason for force closing com.android.phone could probably be a pretty easy red flag for someone better equipped for this Lind of troubleshooting than myself!
Thank you for the suggestion though on the *22(8 in my case)
Click to expand...
Click to collapse
After I posted that, I went back to try and see if Lineage was able to pick up my phone's MEID (even though I use a GSM SIM, the MEID is still tied to the phone hardware). For some reason, Lineage is not reading it, and I think all of your problems are being attributed to that fact.
The way CDMA phones work (and god, do I hate this), is your 2G/3G network is tied to the phone MEID, while the LTE SIM is data only. The OS needs to read both the 14-digit MEID (sometimes shows as a 15 digit IMEI where last digit is 0) as well as the 20 digit ICCID (SIM Number). A phone may also use the SIM number itself as an IMEI (BYOP SIMs do this) by dropping the first five digits of the 20 digit SIM number.
If you phone is showing only one 15 digit number in the system settings, then it's either the MEID OR the SIM, not both. So either you have calling and no LTE, or LTE and no calling. You can't program APN settings because the phone has no idea what ID number to tie APN settings to. This is actually a rather serious conundrum.
Ok ok, makes sense. I checked my Status info, every ROM has dual SIM capability by the way so I don't know if that would effect anything for xt-1607, but I looked at SIM slot 1 info and it reads my MEID correctly with 14 digits. I couldn't find anything about ICCID. My head pounding question here though, why in the hell (pardon the language) is everything flawless on stock, but on every ROM this problem occurs? Here's my next killer, everything works like it should for me, LTE, 3G, Calls, SMS/MMS, just can't change any of the settings due to a force close, AND I put my friends Straight Talk SIM in and it fired right up with no force close when going to change Network settings...?!
[email protected] said:
Ok ok, makes sense. I checked my Status info, every ROM has dual SIM capability by the way so I don't know if that would effect anything for xt-1607, but I looked at SIM slot 1 info and it reads my MEID correctly with 14 digits. I couldn't find anything about ICCID. My head pounding question here though, why in the hell (pardon the language) is everything flawless on stock, but on every ROM this problem occurs? Here's my next killer, everything works like it should for me, LTE, 3G, Calls, SMS/MMS, just can't change any of the settings due to a force close, AND I put my friends Straight Talk SIM in and it fired right up with no force close when going to change Network settings...?!
Click to expand...
Click to collapse
I think you just answered your own question. As stated in PCMag back in 2015, "Nobody makes a Dual-Sim phone compatible with Sprint or Verizon." It legitimately believes your MEID is a GSM-based IMEI, and is attempting to cross the streams, so to speak. And the only way your friend's StraightTalk SIM would work is if it was piggybacking off ATT or TMo's networks (the MEID would have been paired to the other phone causing a mismatch).
If you look at the stock ROM for this phone, you will see a BUNCH of system apps for programming Sprint and Verizon network information. They never made it into the custom ROMs we're using. FWIW, here's my thoughts on the matter. Someone needs to go back and make a single-SIM variant of these ROMs, as well as a flashable ZIP containing the necessary APKs for Android to detect the necessary information correctly. And if that doesn't happen, then everyone who bought an XT-1607 has to ditch their carrier and move to a GSM carrier.
That makes complete and total sense! Because I wasn't thinking this while time of it but I was in Oklahoma at the time where the main towers are AT&T, matter of fact Sprint and U.S. Cellular lose almost all signal right when you hit the county line where I was at. Verizon only gets signal because it's Verizon, lol. Reason I say that is because I was wondering why this whole time I has full signal with LTE coverage and completely list everything when I went hone, because where I live is complete opposite, there is hardly any GSM coverage, we don't even have an AT&T store, just Verizon, Sprint, USC.
So, with that being figured out, my laptop just recently kicked the bucket on me so I'm out for the most part, I do have a trick to swap files in and out of a compressed archive without extracting it in any way! But, it takes a while, not too much longer I guess but nowvi just remembered everything is pretty much .dat files so nevermind that.
Not that this thread isn't the most popular, but where would be the best place to take this request too to get the most attention from it? I mean if I had to go back to stock, so be it, but I'm a little spoiled to the custom life. Lol.
[email protected] said:
Not that this thread isn't the most popular, but where would be the best place to take this request too to get the most attention from it? I mean if I had to go back to stock, so be it, but I'm a little spoiled to the custom life. Lol.
Click to expand...
Click to collapse
IIRC, there is a Verizon thread with 80ish replies, but I think a developer like Squid might need to be made aware of this, so I might copy this into the Lineage thread.
A bit of good news. While reflashing all the time that were force closing when opening cellular networks, I looked in /data/data/com.android.phone/ and was looking, now remember to go back to that directory after I say all this, I found that directory was empty, on all of the Roms. Was curious so I flashed back to stock. Went to the same directory, BOOM! com.android.phone was not empty, in that folder I found 2 folders that were now populated with in:
1: (/files/ )I now had a file named carrierconfig-com.android.carrierconfig- (and after the dash was my ICCID number) so for this directory I need /data/data/com.android.phone/files/carrierconfig-com.android.carrierconfig**ICCID** (replace **ICCID** my ICCID number)
2: then there was this /data/data/com.android.phone/shared_prefs/_has_set_default_values.xml
and
phone/shared_prefs/com.android.phone_preferences.xml
These files are missing on all the Roms, I know this doesn't since everything, but I know for almost a fact it's a good chunk of something that needs to be available. Can I copy these files and move them into place, and set permissions how they were? I ran out of time tonight, and am busy all week so this is mainly for reference I guess. More research told me these files can be edited to change what is available to configure in cellular network settings like option to change from 2G, 3G, LTE, APN, and so on. Sorry for the mess, that's all I have for right now.
[email protected] said:
These files are missing on all the Roms, I know this doesn't since everything, but I know for almost a fact it's a good chunk of something that needs to be available. Can I copy these files and move them into place, and set permissions how they were? I ran out of time tonight, and am busy all week so this is mainly for reference I guess. More research told me these files can be edited to change what is available to configure in cellular network settings like option to change from 2G, 3G, LTE, APN, and so on. Sorry for the mess, that's all I have for right now.
Click to expand...
Click to collapse
That is definitely a major find! My only concern is even if you do that, there might be further missing components that would cause Dialer to crash on startup or some other wacky side effect. However, if you can make it work, then it's possible the proper APN settings will load by default and you'll no longer need to change them.
If you can, go into the System Apps on the stock ROM and look for any APKs branded by/with Sprint, VZW or USCellular, or anything CDMA related. They might be necessary for reading the SIM's ICCID.
That's what I was thinking too, and sadly for me I don't really know EVERYTHING to look for so it'll be mostly out of trial and error for me to figure it out. I wish they didn't compress Roms into .dat so I could use a root explorer to swap between tabs rather than copy, flash the rom, paste files and then if that didn't work start all over on restoring stock, so on and so forth. I miss my laptop. =(
Updates?
Has anyone looked into this further? I'm experiencing the same problem with the latest LineageOS nightly. US Cellular Prepaid with an XT1607.
I noticed that in my case i had to skip the Insert Sim thing on 1st boot. It never did whatever it wanted to there. (Maybe because I have no signal or weak roaming where I live?)
I'm seriously considering trying it from an area that I have good service in..
so, the phone will not connect to the mobile network, the sim card is fine. it is not rooted or unlocked. it just says no service and has a X next to the signal bars on the status bar. i have tried many things to fix it with no luck. i have tried to switch airplane mode on and off, i have been in the hidden menu and tired everything in the modem menu, when i try to switch it to anything like cdma,gprs insted of just auto it says failed. thanks for the help. this has been driving me crazy.
eheinzeiii said:
so, the phone will not connect to the mobile network, the sim card is fine. it is not rooted or unlocked. it just says no service and has a X next to the signal bars on the status bar. i have tried many things to fix it with no luck. i have tried to switch airplane mode on and off, i have been in the hidden menu and tired everything in the modem menu, when i try to switch it to anything like cdma,gprs insted of just auto it says failed. thanks for the help. this has been driving me crazy.
Click to expand...
Click to collapse
Okay. I went through this a whole lot with this phone, and on almost every custom ROM it has. Lineage ROM is the only one that has worked for me right after install. I'm not sure why it does this as the APN settings that comes with the Roms are exactly correct. However you will not be able to get your full service until you manually add the APN settings in yourself. You can delete the 2 other APN's if you want. It really makes no difference. But you will literally have to make a new APN with the exact same settings as the 2 original ones in order for your DATA and MMS settings to work. Once you hit the "save APN" button you should see the 4g or LTE symbol pop on and everything will work just fine. Good luck. Let me know if you still have trouble.