Related
Anyone else have this problem?
numus said:
Anyone else have this problem?
Click to expand...
Click to collapse
So is fastboot the problem or are you trying to boot to recovery through the bootloader. I would use ADB instead of fastboot. But if what you're asking is that you want to boot to recovery from the bootloader, just connect your USB cable to your computer and then select recovery in the bootloader.
CharliesTheMan said:
So is fastboot the problem or are you trying to boot to recovery through the bootloader. I would use ADB instead of fastboot. But if what you're asking is that you want to boot to recovery from the bootloader, just connect your USB cable to your computer and then select recovery in the bootloader.
Click to expand...
Click to collapse
Pretty sure it is fastboot... You use the volume rocker to select recovery and hit the power button... It shows the Bootscreen but doesn't go any further than that.
Edit: it says in red FASTBOOT MODE.. When i select recovery it goes tot he google screen (witht he unlock icon) and doesn't go any further than that.
numus said:
Anyone else have this problem?
Click to expand...
Click to collapse
I'm having trouble too. I have it plugged in to my laptop. When I select "Recovery" and press Power, it just reboots, and then boots into Android.
No recovery.
So I'm gonna try TWRP..
i had the same issue this is what i did
download new recovery h**p://goo.im/devs/OpenRecovery/grouper/openrecovery-twrp-2.2.1.4-grouper.img
then in fastboot
fastboot erase recovery
fastboot flash recovery name_of_recovery.img
wait 15 seconds
unplug usb cable
then use volume keys to boot in to recovery
hope this helps
so any solution at the same screen, same problem.
dj_denims said:
i had the same issue this is what i did
download new recovery h**p://goo.im/devs/OpenRecovery/grouper/openrecovery-twrp-2.2.1.4-grouper.img
then in fastboot
fastboot erase recovery
fastboot flash recovery name_of_recovery.img
wait 15 seconds
unplug usb cable
then use volume keys to boot in to recovery
hope this helps
Click to expand...
Click to collapse
You want to be in the bootloader mode and select recovery. The trick is that to do that, you have to have your Asus USB cable connected to a live usb port when you do it, and it usually works if recovery isn't damaged.
And you can also use Wug's toolkit on the computer, or if you can boot the tablet, you can use goo manager to reboot to recovery, or the Trinity kernel app, or your rom's advanced power menu.
With the USB cable attached from the computer to tablet, here's what I did:
- Went to bootloader
- Did "fastboot erase recovery"
- Did "fastboot flash recovery IMG"
- Then boot to recovery manually from the device itself via volume buttons and Power
Hasn't failed me yet when trying out different recoveries. There was some issue a while back where you had to have the USB cable hooked to your computer and Nexus 7 in order to get to recovery. Not sure if the bug still exists, but it may be worth trying with the cable in.
Also you probably have to have an unlocked bootloader (lock at bottom of Google boot screen).
dj_denims said:
i had the same issue this is what i did
download new recovery h**p://goo.im/devs/OpenRecovery/grouper/openrecovery-twrp-2.2.1.4-grouper.img
then in fastboot
fastboot erase recovery
fastboot flash recovery name_of_recovery.img
wait 15 seconds
unplug usb cable
then use volume keys to boot in to recovery
hope this helps
Click to expand...
Click to collapse
Thanks for that.
That worked for me
Does the USB port you're plugged into need to be a computer with the fastboot drivers already installed? My unit freezes up in bootloader every time I plug in any live USB cable, whether it's a computer or not. My recovery is fine, but with the bootloader constantly freezing I'm not able to install the N7 drivers on my computer, let alone input any fastboot commands. And no, I don't have access to the computer with the drivers already installed sadly.
Sent from my SGH-T989 using xda premium
Turn it off plug USB lead into PC/laptop and nexus hold volume up and down and turn it on, or it also works via my otg cable in my s3 also, its a bug..
Sent from my Nexus 7 using Tapatalk 2
a stupid bug.buoght yesterday,rooted and unlocked.downloaded 10 roms,all kernels,and now that i'm ok to begin test i tried without luck to enter recovery from fastboot (i didn't know this fact)but my cable was inserted on pc usb port...and strange it doesn't work.yestrerday via fastboot i flashed twrp recovery that i love and use also on mine gnexs.i'm on stock rom yet,and without "reboot to recovery" option in powermenu.i reflashed twrp,cwm touch (in fastboot manually)then the same but with a rootkit,no luck.i began to think i have a problem in my device and i don't know how to do because it's a secondary bug for assistance i think..and i read this post.don't even tried commands in few posts ago,already did same things an hour ago.i installed quickboot frm playstore and now i can boot on TWRP.use this for today,when i begin to test roms i'll have the powermenu option!
Sad this,i'm a bit anxious of this bug,because i soft brick gnex every 2\3 days,always trying things and stuff,kernel with modifications by me etc,and i often have to go in cwm via devices off and fastboot before...i see that my tab attacched at pc don't enter recovery from fastboot mode..and it's a problem for me.hope someone discover where is this bug and find a workaround\fix fro that.
cheers
sert00 said:
a stupid bug.buoght yesterday,rooted and unlocked.downloaded 10 roms,all kernels,and now that i'm ok to begin test i tried without luck to enter recovery from fastboot (i didn't know this fact)but my cable was inserted on pc usb port...and strange it doesn't work.yestrerday via fastboot i flashed twrp recovery that i love and use also on mine gnexs.i'm on stock rom yet,and without "reboot to recovery" option in powermenu.i reflashed twrp,cwm touch (in fastboot manually)then the same but with a rootkit,no luck.i began to think i have a problem in my device and i don't know how to do because it's a secondary bug for assistance i think..and i read this post.don't even tried commands in few posts ago,already did same things an hour ago.i installed quickboot frm playstore and now i can boot on TWRP.use this for today,when i begin to test roms i'll have the powermenu option!
Sad this,i'm a bit anxious of this bug,because i soft brick gnex every 2\3 days,always trying things and stuff,kernel with modifications by me etc,and i often have to go in cwm via devices off and fastboot before...i see that my tab attacched at pc don't enter recovery from fastboot mode..and it's a problem for me.hope someone discover where is this bug and find a workaround\fix fro that.
cheers
Click to expand...
Click to collapse
Paragraphs dude? Or at the very least, proper spacing.
On stock rooted rom, flash latest TWRP recovery. openrecovery-twrp-2.2.2.0-grouper.img
adb reboot bootloader
fastboot flash recovery openrecovery-twrp-2.2.2.0-grouper.img
Then install Rom Toolbox. Use the "Rebooter" to Reboot recovery, and you should have no issues.
..
mvmacd said:
Paragraphs dude? Or at the very least, proper spacing.
On stock rooted rom, flash latest TWRP recovery. openrecovery-twrp-2.2.2.0-grouper.img
adb reboot bootloader
fastboot flash recovery openrecovery-twrp-2.2.2.0-grouper.img
Then install Rom Toolbox. Use the "Rebooter" to Reboot recovery, and you should have no issues.
Click to expand...
Click to collapse
I did this and I still can't boot into recovery. The only way I can boot into recovery is if I use the fastboot command. The rom toolbox does not work for me.
similar problem
I have somewhat similar problem. Well, actually the problem is not very uncommon the way it looks, but usual solutions do not work.
Basically I have erased my old rom (rebooted to recovery from aokp menu) and erased my rom. I've tried mounting the device from the recovery mode, but it was not recognised on my PC. I assumed that this was an Win8 issue.
Once I've rebooted, I could no logger boot to recovery (after selecting recovery all I got was google logo). I've thought of flashing recovery via fastboot, but bootloader seams to freeze with usb cable in (no matter the cable) and resetting does not help (the way it helped others). Also I cannot fastboot at that time either as PC (neither win8 nor win7 machine can see the device).
Any ideas would be appreciated.
When the bootloader freezes with the usb cable plugged into a PC, it is a driver issue. Uninstall and reinstall the drivers. I have experienced this on a win7 x64 system.
It isn't a driver issue as the same thing happens when connecting to a charger and not the PC.
It happens on mine as well.
Well it wouldn't crash with wall charger if it was a PC driver issue.
In either case, I've actually figured out what's the problem. It seems that usb connector is not very reliable. If the it usb connection is poor, the bootloader crashes. To avoid this issue you have to bend the cable towards the screen to ensure the proper connection. It load that way just fine.
Edit: or not... probably bending just removed the connection completely...
Edit2: did not figure out what was the problem, but after playing around some more, the phone has popped up in computer manager and I was able to continue from there. After flashing the recovery (twm -> cwm), the bootloader un-froze as well.
Hello,
problem above, maybe it's a hardware malfunction which would be awful.
I tried:
- whipe everything in the CyanogenRecoveryMenu
- sideload via Minimal ADB / Fastboot
- a lot more commands and helps on this site and on the internet (push,
Details:
- fingerprinter died, then the phone always crashed with blue and green flashing lights on the screen and now a bootloop
- "stock" CyanogenOS installed, but no TWRP
- the phone gets detected by my computer (sound)
- i don't remember if usb debugging is enabled (probably not)
- the command "adb devices" shows my phone when its in ADB mode (recovery menu)
- i sometimes get the error "error:closed" on my computer
Thank you for any help
doebelfish
doebelfish said:
Hello,
problem above, maybe it's a hardware malfunction which would be awful.
I tried:
- whipe everything in the CyanogenRecoveryMenu
- sideload via Minimal ADB / Fastboot
- a lot more commands and helps on this site and on the internet (push,
Details:
- fingerprinter died, then the phone always crashed with blue and green flashing lights on the screen and now a bootloop
- "stock" CyanogenOS installed, but no TWRP
- the phone gets detected by my computer (sound)
- i don't remember if usb debugging is enabled (probably not)
- the command "adb devices" shows my phone when its in ADB mode (recovery menu)
- i sometimes get the error "error:closed" on my computer
Thank you for any help
doebelfish
Click to expand...
Click to collapse
Did you also tried factory reset already?
If you have adb access you can only try to get bootloader unlocked which wipes all if not happened yet. Then you can try installing twrp and another rom and see if boot is OK.
If your bootloader is still locked go to service center if you have warranty!
strongst said:
Did you also tried factory reset already?
If you have adb access you can only try to get bootloader unlocked which wipes all if not happened yet. Then you can try installing twrp and another rom and see if boot is OK.
If your bootloader is still locked go to service center if you have warranty!
Click to expand...
Click to collapse
Thanks for a reply,
After a full reset I have downloaded a twrp.img file for my device
I tried:
- command "fastboot devices" while in fastboot-mode (I pressed reboot to bootloader in the recovery menu to get there)
-> no device detected despite a sound after connecting
- command "fastboot flash twrp.img" -> "waiting for device" without any further reaction
My device is only detected in ADB mode, not in fastboot mode, how can I change that? I must unlock the boot loader in fastboot mode right?
doebelfish said:
Thanks for a reply,
After a full reset I have downloaded a twrp.img file for my device
I tried:
- command "fastboot devices" while in fastboot-mode (I pressed reboot to bootloader in the recovery menu to get there)
-> no device detected despite a sound after connecting
- command "fastboot flash twrp.img" -> "waiting for device" without any further reaction
My device is only detected in ADB mode, not in fastboot mode, how can I change that? I must unlock the boot loader in fastboot mode right?
Click to expand...
Click to collapse
Did you have actually drivers installed for fastboot? See guides like this http://forum.xda-developers.com/zuk-z1/general/guide-how-to-unlock-root-install-twrp-t3394037
Also qfil method can help http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But consider service center in case of warranty.
same problem. fingerprint died. then after a empty battery shutdown i face bootloop. but hopefully i have TWRP installed and i could recover my data. but i dont know how to access factory reset menue or install another fresh rom
Hi everyone,
As mentionned in the title I'm afraid I bricked my Shield TV (model 2015, 16GB).
It was previously running StockRestyle 3.0 Marshmallow (from zulu99: https://forum.xda-developers.com/shield-tv/development/rom-t3321787) and all was fine with it.
But since Nvidia announced Nougat for the Shield TV, I wanted to give it a try.
Thus, I tried to flash the official recovery images from Nvidia, but I think I made the mistake to flash the Nougat version instead of the Marshmallow one.
So, here is what I've done:
- I copied the official Nougat recovery images on my PC in my adb folder
- I ran the flash-all.bat
- it started all right, but was then stuck for several minutes
- the shield TV rebooted itself but was stuck on the Nvidia logo
- after several minutes without change nor messages on the command, I quit the command terminal.
Later, I tried to start the process again without success.
Now, I can have access to the bootloader using the hardware procedure (long-press on the power button).
Unfortunately, it says on the top "Production mode: fused" (see the attached pictures).
From the bootloader, I tried "Forced recovery" -> I got a black screen -> Fail
I also tried the "Boot recovery kernel" -> I got the screen image with the android robot down with an warning symbol (see the attached pictures)
I tried adb and fastboot without success.
When I reboot the bootlaoder, with the shield connected to my PC with an OTG cable, the shield is detected but there is a warning message on my PC (it's not well recognized).
Also, "fastboot devices" returns nothing.
Technically, the shield is l still under warranty since it's less than 2 years old, but I'm afraid this "Production mode: fused" message would void it!
Any similar situation or suggestion?
Thank you in advance and have a nice day.
Hi, that production mode: fused is normal. I checked and I have it. I think it is there since I unlocked the bootloader. I run Full Android Nougat from @zulu99 without issues.
Do not keep trying to flash things just to flash. While you be able to boot into bootloader you can recover it (remember this) but is also true that if you mess with the bootloader you can brick your device. You're just soft bricked not hard bricked.
First, post the complete version of the bootloader, in the screenshot I can't see the whole version.
For later (do not attempt to flash anything until we go thru some checks):
Try with another known working USB cable and/or reinstalling fastboot drivers. And do not use flashall.bat, you will do it command by command.
Enviado desde mi Moto X mediante Tapatalk
That's what happens when you don't follow directions
Here is a picture with the complete version of the bootloader.
I followed quite well the instructions a year ago when I was trying to evaluate the pros and cons of Stock ROM, Stock Restyle and Full Android. Unfortunately @zulu99 posts have been closed since then.
Thus I forgot I had to revert back to standard Marshmallow first ;-(
I also tried two others USB OTG cables.
With on of them I managed to get "fastboot devices" recognizing a device, and I don't have this warning message on my PC (it's not well recognized) when starting the bootloader.
What should I do next?
Problem solved!
Since I guess the issue was mainly due on the suddenly defective OTG cable (it worked in the beginning of my last try, since I managed to flash some parts), I started the procedure again with with the official recovery 5.0.2.
- I started the bootloader using the HW method: long-press on the power button during powering up, until the bootloader appears
- Then,
* fastboot -w
- Then, again, I had to start the bootloader using th HW method
- Then, I followed most of the points described in the flash-all.bat files (except the adb commands)
* fastboot flash staging blob
* fastboot flash boot boot.img
* fastboot reboot
- Again, I had to start the bootloader using th HW method
- Then,
* fastboot flash recovery recovery.img
* fastboot flash system system.img
* fastboot flash vendor vendor.img
* fastboot reboot
- and voilĂ : I got Nougat running. Then the time it took me to enter my email credentials and so on, the OTA update to 5.1 was downloaded and ready to install.
A few minutes and a reboot later, I have the latest version running.
Thanks guys.
Your issue was the USB cable, if there is no good connection the flash can be incomplete thus corrupted. It is better to run the commands manually one by one so you know if it was successful on each flash or identify where it got stuck. Your lucky it didn't fail while flashing blob.
Probably failed after the boot flashing and fastboot reboot.
I suggest you get another USB cable, always use high quality cables. The internet is flooded with Shield TV users with TWRP, flashing issues and bricked devices because of a bad USB cable.
Enviado desde mi Moto X mediante Tapatalk
I tried doing the same thing and i got errors when flashing system and vendor files. It says that data is too large.
Device LG G6
Model : G600LR30c
I was thinking of installing a custom os which requires TWRP recovery installed in the device which recuires the device to be bootloader unlocked. But when I use the command "adb reboot bootloader" in minimal adb the device never goes to boot menu, instead it simply restarts and then if I put the command "fastboot oem device-id", it never shows the id and keeps showing "waiting for a device" instead. Please help me resolve this.
P.S: I also tried to access boot menu using key combo. but in vain
If you can put the phone in Fastboot mode during powerup or restart, it's a Windows issue if it don't work. Windows must recognize the device via PnP and install a different set of drivers each time the usb mode changes. If it don't work when the phone is already in Fastboot mode, try different drivers.
I once had two sets installed, that from the device manufacturer and that ripped from the Google SDK(on XDA). This way all usb modes worked, but Windows couldn't perform the Reboot Fastboot/Recovery commands fom ADB like is the case here and the Windows software had, suitable drivers installed, to be able to access the phone if it was already set to Fastboot/Download etc mode.
That was a TI OMAP based LG L9 under Win7. Starting with Windows 8.1, Fastboot was no longer working at all, you could only perform disaster recovery via D/L mode with a stock image and then root the thing with a one-click rooter to be able to install a recovery from Android etc etc, but that was due to the no longer supported TI SoC. But Qualcomm also tends to completely abandon older SoCs.
Hey guys, I know this isn't super active anymore, but I tried looking and tried posting elsewhere, and I can't find the answer I need. I'm sure it's something super simple I've overlooked.
I was gifted a 2015 Nvidia Shield TV Pro that was never used, so when I turn it on it gets stuck forever asking for my google login and won't proceed (like this thread here).
I can access the fastboot menu on the unit, and I've installed the PC drivers - BUT
When I open command and type "adb devices" it shows no devices connected.
I'm TOLD this is because I need to activate USB debugging on the unit, but how can I toggle on the USB debugging if I can't get past the google sign-in for a first-time set up?
Am I approaching this wrong?
PLEASE help!
Hello, I have exactly the same issue.
I would be really grateful if someone could help us.
i think you must set your SHIELD in FASTBOOT mode and after flash the stock firmware from https://developer.nvidia.com/gameworksdownload (you can't set FASTBOOT mode from ADB because of the wrong login)
to set fastboot mode look here : https://nvidia.custhelp.com/app/ans...invoke-the-android-fastboot-menu-on-shield-tv
Thanks conduisant! It helped.
I have spent some time to flash new recovery:
How far I was able to proceed:
I downloaded ADB Fastboot drivers
I downloaded recovery image (nv-recovery-image-shield-2017-atv-8.2.3)
I connected Nvidia Shield 2017 (model: P2897) with USB-A-to-USB-A cable to the PC
I was able to see "unknown device" so I installed ADB drivers (SHIELD_Family_WHQL_USB_driver_201801)
In device manager I can see my shield (as a Android Bootloader Interface)
I can access fastboot (pressing A+B on controller during turn on of shield)
I opened CMD and type "fastboot devices" - press enter - I can see my device is listed "03xxxxxxx fastboot"
I am able to execute "fastboot oem unlock", so bootloader is unlocked
I am able to write recovery image by using following commands written in instructions:
fastboot flash staging blob
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot oem lock
fastboot reboot
(no errors, everything was "OKAY")
But after the device restart , I can post only until the nvidia logo and that is it. Unfortunately I do not even know which was the original (stock) version of system in nvidia shield pre-installed. I tried to flash several versions of recovery images, but nothing helped. I can still see only nvidia logo :-(
But what I noticed, my Fastboot looks pretty different. I do not see my bootloader version, also some options are missing (lock bootloader, unlock bootloader etc.)
I also tried another options - boot recovery kernel, safe mode, but only nvidia logo every time.What is strange, when I turn-on the device, the Fastboot is automatically booted (I do not even hold A+B to initiate fastboot) I need to select continue.
So now I am not even able to try login into the shield anymore. I guess I already bricked the device :-(
what you have done is pretty correct !
Shield seems to be hard bricked, you can also try to flash TWRP + lineage OS ROM only to see if the SHIELD still not boot...i've no other idea
Thank conduisant for your effort!
Unfortunately, I am not able to boot into the TWRP.
I tried to flash TWRP what I have found here on forum:
UNOFFICIAL-twrp-3.0.2-ALL-Shields-build2.zip
But no success.
I tried to also flash official TWRP:
twrp-3.2.3-0-foster.img
But also no success.
I do not know which offical recovery to flash before LineageOS ROM (or it does not matter?)
Unfortunately, for some reason my gamepad in Fastboot stopped working (gamepad is connectied via USB to the shield, closest to HDMI port)
It just rumble when Fastboot booted and blinks blue led. I tried to charge gamepad - or - another nvidia shield gamepad but it does not work.
Also USB keyboard does not work. Looks like the USB port does not work properly anymore, so I am not able to click "Continue" in fastboot anymore to post at least until nvidia logo.
Luckily, the bootloader is still unlocked, so I am able to flash anything but I have already lost my mind.
I need another coffee and one full-day of meditaion.
i've got 2017 SHIELD, and i've flashed this TWRP last days + this LINEAGE OS : and all working good
TWRP = https://eu.dl.twrp.me/foster/twrp-3.7.0_9-0-foster.img.html
LINEAGE OS = https://download.lineageos.org/foster
when USB debugging is ON, only one USB port is activate for USB devices (keyboard for example) : it's the port near HDMI, the other port (near fan grid) is for ADB connection for the PC