i installed the os in ext4 when i try to enter the DarkMatter from grub boot
loading this screen and nothing happen
prepare to be amazed
I have same problem:crying:
bro dont use initrd mod use stock pos
Hello guys I tryed to install phoenix os roc v5.
I made a Bootable USB disk using rufus and now when I boot from USB this massage(in the picture) shows up and I can't install it. Can u please help me.
Related
Hello,
When i tried to install the driver on boot mod, i've got this error, see : Here
I tried several times and on 2 computers ( windows 7 ) to reinstall the driver but it's still the same.
On a Windows XP computer, it's "unknown device" and i can't install the driver.
Is it possible that the boot mode can be corrupt ?
I can flash the tablet on the recovery mod. Can we reflash the boot sectors with the recovery mode or somethink like that.
thanks for your help
my defy stuck on motorola logo after i was trying to install the cm7.2 rom
and the blue led isn't flash
I tried to flash it with motorola RSD lite but when I enter boot loader mode and connect it to my computer (Windows 7 64bit) it says it couldn't find the driver for S Flash OMAP3630
I've googled and I just can't find a driver for this thing anywhere!
what should i do ?? plz help me
7mrawy said:
my defy stuck on motorola logo after i was trying to install the cm7.2 rom
and the blue led isn't flash
I tried to flash it with motorola RSD lite but when I enter boot loader mode and connect it to my computer (Windows 7 64bit) it says it couldn't find the driver for S Flash OMAP3630
I've googled and I just can't find a driver for this thing anywhere!
what should i do ?? plz help me
Click to expand...
Click to collapse
Have you installed the latest drivers?
http://forum.xda-developers.com/showthread.php?p=17247255
If you still cant get it to flash, then try on a Win Xp PC if you have dual boot or at friend's place.
zopeon said:
Have you installed the latest drivers?
http://forum.xda-developers.com/showthread.php?p=17247255
If you still cant get it to flash, then try on a Win Xp PC if you have dual boot or at friend's place.
Click to expand...
Click to collapse
still couldn't find the driver for S Flash OMAP3630 ??
but thanks
Download Motorola Device Manager for Windows 7.
http://www.motorola.com/Support/CA-EN/Support-Home/USB-Drivers-and-PC-Charging-Drivers
If you want to flash cm7.2, you have to make sure to wipe data + cache + dalvik before flashing, and make
sure that you run a froyo kernel, not GB.
Have you tried using stock bootloader ? from there you must just do a factory wipe / reset and it should be all good check here , maybe it will help you ! :good:
Hit thanks button if i helped it
hello ... i have broblem with my phone (zuk z1)
first of all i install twrb recovery in my phone then i root it .
after that i install (Latest Release 2016-04-18) from
cyanogenmod.org
and i anstall g apps ..and i install (Latest Release Recovery 2016-04-18) at the same time .
when i reboot my phone the androied system dosn't work it just keep reboot it self .
and when im trying to transfer the twrp file from my computer to the phone my computer dosn't Recognize the phone ..
i running windows 10 ..and i tryied on windows 7 but it dosn't Recognize it too .
so i can't transfer any thing not other rom and not other recovery nothing at all
and my phone not working .
sorry my english is very bad .
pleese help me
khalidturk said:
hello ... i have broblem with my phone (zuk z1)
first of all i install twrb recovery in my phone then i root it .
after that i install (Latest Release 2016-04-18) from
cyanogenmod.org
and i anstall g apps ..and i install (Latest Release Recovery 2016-04-18) at the same time .
when i reboot my phone the androied system dosn't work it just keep reboot it self .
and when im trying to transfer the twrp file from my computer to the phone my computer dosn't Recognize the phone ..
i running windows 10 ..and i tryied on windows 7 but it dosn't Recognize it too .
so i can't transfer any thing not other rom and not other recovery nothing at all
and my phone not working .
sorry my english is very bad .
pleese help me
Click to expand...
Click to collapse
You can try to reinstall twrp recovery by using all in one tool or the adb way, what you like. It's like the step after bootloader unlock, where you first install twrp to replace stock recovery.
Then you can flash a custom rom again.
Sent from my Z1 using my hand
Hi i have a Jiayu S3 which for the second time breaks up firstly from my official rom crashed unknown why and my brother managed to relive it installing twrp recovery and xtreme rom. Now againb crashed and enter in a bootloop while surfing on the net. I have to mention that i have [email protected] up my devive some time ago and cannot connencted via usb (pc or usb stick) things that used to do very often. Know i manage to get ito recovery install miui 9 rom(from need rom) but reboot continiously....get back to xtreme (from need rom again) and reboot continously...tried miui 7 rom boot loop again. So i stuck to boot loop!!! i can not use SP flash tools because my PC refuses to intall the correct MTK, MEDIATEK MT66XX or any VCOM ,usb etc drivers (( . It only sees my device as a composite device. I can't use fastboot as long as i don't know how to do it and how i can connect my device to pc . Please help is there any way i can get out of bootloop via sd card from recovery mode?? I am exhausted reading and searching and watching tutorials....Thanks in advance.
PS i manage only 2 times to enter in a chinese mode(black screen) but i don't know how to proceed in that and what does this mode do.
Still no one to help??
Hi again,
No one is willing to help me with my issue ok . I ll ask something else. My pc recognizes my jiayu as composite device , my samsung gt-s6102 2.3.6 android as cdc device and only my huawei lua-01 as android phone lua-01. Could you please help me how to overcome this and procced to frash my jiayu because it didn't seem to get over bootloop while i was trying to install rom via twrp 3.0.2 when i try. Or if you know if there is a file i should delete in file manager so i can proceed over bootloop... thanks in advance.
giolandis said:
Hi again,
No one is willing to help me with my issue ok . I ll ask something else. My pc recognizes my jiayu as composite device , my samsung gt-s6102 2.3.6 android as cdc device and only my huawei lua-01 as android phone lua-01. Could you please help me how to overcome this and procced to frash my jiayu because it didn't seem to get over bootloop while i was trying to install rom via twrp 3.0.2 when i try. Or if you know if there is a file i should delete in file manager so i can proceed over bootloop... thanks in advance.
Click to expand...
Click to collapse
Hi,
can you flash a ROM using SP-Flash Tools? With SPF you don't need the mobile to be switched on. Of course drivers for MTK must be installed properly before doing this. Maybe clearing cache and Dalvik could help as well.
hello guys
i need help about flashing my 2 dead phone GT-I9195.
in my laptop it shown : Qualcomm HS-USB QDLoader 9008 .
i know we can't use qpst so sad .
i'm searching for solution without the z3x box or any other items.
First i follow this guide :
LINK (
[HARD BRICK ?] - I919x - Make your debrick.img and have it on extSdCard by security
Hi People We all must have the debrick.img on our extSdCard by security. If we have a Hard Brick we can make like this examples solved whit success. See two HARD BRICK's solved. I have sending them the debrick.img: This whit a Guide...
forum.xda-developers.com
)
debrick.img 4.4.2 -> LINK (https://mega.nz/#!T9hxAJQC!e74HQeHhU66fmPFVFOLdxTtFyR-fxntfc37qFb22oRA)
i use Win32DiskImager to flash the debrick.img in 16GB Sd card
i put sd card in the phone.
the phone boot to T-flash(Odin) .
i use the CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit and then i flash I9195XXUCQL2_I9195XXUCQL2.tar from TRWP guide : LINK (
[RECOVERY][OFFICIAL] TWRP 3.5.2_9-0 [I9190][I9192][I9195][L520]
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and...
forum.xda-developers.com
)
i tried TRWP , CWM recovery.img and both worked.
in TRWP only focused on the internal Storage and it is 0 MB , can not wipe or mount or do anythink , i want to change TRWP to see the SD CARD.
so with CWM i can use adb sideload to falsh zip file.
i try cm-13.0-20161219-NIGHTLY-serranoltexx.zip with adb : not work ,no system shown.
when i change the phone to download mode i flashed :
I9195XXUCQL2_I9195TMZCQL2_I9195XXUCQL2_HOME.tar ,
I9195XXUCPB1_I9195ITVCPB2_I9195XXUCPB1_HOME.tar ,
I9195XXUCNH5_I9195OJVCNH1_I9195XXUCNH5_HOME.tar.md5 ,
I9195UBUCOH1_I9195ZVVCNI1_I9195UBUCOH1_HOME.tar.md5.
no system shown , and the phone back to the T-flash and i do the same reflash CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit and I9195XXUCQL2_I9195XXUCQL2.tar to can boot to download mode.
The big problem is there is no system. only i can use download mode and recovery mode(TRWP , CWM).
I want the phone to have system
please anyone can help me , i'll do my best in research.
chakroun saifallah said:
hello guys
i need help about flashing my 2 dead phone GT-I9195.
in my laptop it shown : Qualcomm HS-USB QDLoader 9008 .
i know we can't use qpst so sad .
i'm searching for solution without the z3x box or any other items.
First i follow this guide :
LINK (
[HARD BRICK ?] - I919x - Make your debrick.img and have it on extSdCard by security
Hi People We all must have the debrick.img on our extSdCard by security. If we have a Hard Brick we can make like this examples solved whit success. See two HARD BRICK's solved. I have sending them the debrick.img: This whit a Guide...
forum.xda-developers.com
)
debrick.img 4.4.2 -> LINK (https://mega.nz/#!T9hxAJQC!e74HQeHhU66fmPFVFOLdxTtFyR-fxntfc37qFb22oRA)
i use Win32DiskImager to flash the debrick.img in 16GB Sd card
i put sd card in the phone.
the phone boot to T-flash(Odin) .
i use the CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit and then i flash I9195XXUCQL2_I9195XXUCQL2.tar from TRWP guide : LINK (
[RECOVERY][OFFICIAL] TWRP 3.5.2_9-0 [I9190][I9192][I9195][L520]
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and...
forum.xda-developers.com
)
i tried TRWP , CWM recovery.img and both worked.
in TRWP only focused on the internal Storage and it is 0 MB , can not wipe or mount or do anythink , i want to change TRWP to see the SD CARD.
so with CWM i can use adb sideload to falsh zip file.
i try cm-13.0-20161219-NIGHTLY-serranoltexx.zip with adb : not work ,no system shown.
when i change the phone to download mode i flashed :
I9195XXUCQL2_I9195TMZCQL2_I9195XXUCQL2_HOME.tar ,
I9195XXUCPB1_I9195ITVCPB2_I9195XXUCPB1_HOME.tar ,
I9195XXUCNH5_I9195OJVCNH1_I9195XXUCNH5_HOME.tar.md5 ,
I9195UBUCOH1_I9195ZVVCNI1_I9195UBUCOH1_HOME.tar.md5.
no system shown , and the phone back to the T-flash and i do the same reflash CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit and I9195XXUCQL2_I9195XXUCQL2.tar to can boot to download mode.
The big problem is there is no system. only i can use download mode and recovery mode(TRWP , CWM).
I want the phone to have system
please anyone can help me , i'll do my best in research.
Click to expand...
Click to collapse
Hello , i think you wiped your system you have to install another one. Try Lineage Os
If it does not work try shutting down the phone, remove battery and hold power button for 30 seconds.
Zac C4rter said:
If it does not work try shutting down the phone, remove battery and hold power button for 30 seconds.
Click to expand...
Click to collapse
remember i can't control the internal storage because the phone is dead , i only have the files and partitions in the SD card(external Storage) .
i already tried Lineage Os . the CWM say
+ can't mount /cache/system , mount : failed .... and long message.
it show erreur then installation aborted.
all this because the partition is in /storage/sdcard1.
so how i should redirect the installation ?
chakroun saifallah said:
remember i can't control the internal storage because the phone is dead , i only have the files and partitions in the SD card(external Storage) .
i already tried Lineage Os . the CWM say
+ can't mount /cache/system , mount : failed .... and long message.
it show erreur then installation aborted.
all this because the partition is in /storage/sdcard1.
so how i should redirect the installation ?
Click to expand...
Click to collapse
Try switching to Ext4
:Edit
Also Check Here https://appuals.com/how-to-fix-twrp-unable-to-mount-storage-internal-storage-0mb/
Zac C4rter said:
Try switching to Ext4
:Edit
Also Check Here https://appuals.com/how-to-fix-twrp-unable-to-mount-storage-internal-storage-0mb/
Click to expand...
Click to collapse
i have tried it all the 11 steps and not work. internal storage is 0 MB
i'm using trwp 3.5.0_9.0
after i flashed the SD card with Win32DiskImager and with the debrick.img , everythink now is in the external storage, my problem is i can't access to it, or install zip file with trwp or cmw because i can't mount the partitions in trwp or cwm.
i only can use download mode to flash files by odin
i want to know if i can do it manuelly by termianl commends in trwp .
but how i can know the places of the unmounted partitions ?