Hi , i flashed Jui 1707040 thru recovery . Now Cpu-z and other apps reports that system is rooted . The boot image probably was already patched/rooted.
Does anyone have stock unrooted/unpatched boot image ? JUI version is 1707040 .
Thank you.
Related
Please help needed!!
I'm stuck here for 3 days
Ok I'm going to tell everything I did,,
My Gionee E7 is indian version.
First I rooted my phone with kingo Root.
Than I flashed CWM chinese version.
I upgraded my system to kitkat and changed the recovery to stock.
I used it for a week than some how my music player and gallery were corrupted.
I don't have any rom so I download one but it was in chinese, flashed it to my gionee. than after rooting,,
I flashed the CWM, same I flashed weeks ago
Here my problem started :crying:
The CWM is not starting. I used recoery tool to boot into recovery after boot up it shows black screen. I used every method holding Vol+ and power button but the same result.
than I tired to get back to my stock recovery but it does the same.
flashed many times both recoveries but didn't worked.
I searched a lot and find a TWRP. I flashed it and wow it worked Finally I can boot into recoery mode.
Now I find the Nandroid backup of indian version. I made it a zip and flashed it through twrp.
My phone is back to indian version but its slow, not too much but its slow; camera, gallery and other apps take some time to open. I can't make or rcv phone calls. Now what i did is download the update form System update.
Now i got kitkat rom.zip but twrp failed to install it.
Some one on the internet was saying that its the problem with my Kernel. I have the latest kernel so CWM won't work cuz it uses old kernel and display drivers.
My
android version is 4.2.2
Kernel version is 3.4.0-svn2155
I also got TWRP for lolipop,
and I patched binary_update in my kitkat rom too but TWRP can't flash it
Thats my whooooolllleeeee story. "
I got stuck with this for almost 3 days now I'm damn tired can't do it anymore plz help :crying::crying::crying:
I figured it out by myself
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
AkashX4686 said:
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
Click to expand...
Click to collapse
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
No its not, it is working on 64bit windows very well.
In TWRP factory reset and format system and data, than install
Chinese 4.2 ROM. After that boot it and try it again.
It should work!
bllkarv said:
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
Click to expand...
Click to collapse
For me...problem!
there´s a cwm recovery that flashes over the kernel...
i flashed it and than i was unable to go to recovery, every time i tried the phone power off
Solution: Flash the stock boot.img
Use the file according to the Android version...
Help
I just rooted my gionee elife e7. Flashed the chinese recovery which seemed to be the only one which would be compatible. But, while changing a few setting using pimp my rom, the software just stopped working. Errors keep showing up on the screen - "system.ui is not working", "android app is not working", I cannot even go the settings because "settings is not working". Third party apps still seem to work, so, whatsap and stuff continue to function. Doing a factory reset or flashing firmware again seem to be the only viable option.
But, when I try to load up the bootloader using the power and volume keys, it gets stuck on the screen showing the gionee logo and it reads 'fastboot mode' in the bottom left hand side corner. So,
a. can you offer any advice which may be useful ?
b. can you share the link from where you got a TWRP recovery which will work on the Elife ?
c. do you have any idea what exactly went wrong here ?
Any help you can provide will be appreciated because, it's my mausi's phone and I will have a very tough time explaining what really went down here.
Regards,
Can someone please post here stock recovery.img for OPT im now on TWRP but i want to install H2OS OTA normally.
Thank you so much
You may have chosen to keep the twrp recovery on your device from beeing overwritten by the stock recovery. This is done in twrp by renameing the "/bin/recovery.sh" (afaik).
Before installation OTA update checks for all checksums of files it will patch. So you will not only need the stock recover but at least to replace the recovery.sh with the original one.
Much easier way is to flash 2.0.2 full (not the OTA!), flash 2.1 OTA, flash SU and reboot in one session from twrp . I have done this and it worked without a problem.
Just make sure your battery is fully charged before
I'm getting an updated binary error. Started getting it in TWRP after flashing a custom kernel. Could you post your stock recovery? Or the stock kernel? (preferably the latter I suppose)
I've tried digging into the full 2.0.1 and 2.1 ROMs to find them, but I can't track them down...
Yes,i need the stock recovery
Well I need stock recovery because of hydrogen OS hope someone have it..
All you need is recovery paparapapa ahahahah
I managed somehow to have back stock recovery
When i flashed TWRP and then Gapps for Hydrogen OS it asked me to stop stock recovery to flash or something so i press dont stop, and voila im back on stock recovery
OnePlus 2 stock recovery -> http://forum.xda-developers.com/oneplus-2/general/oneplus-2-stock-recovery-t3217848
my zenfone 2 laser is bootloop! (ZE500KG)
I try flash file TWRP but I can't do that!
It say ''Failed'' > '' zip verification failed''
anyone know how to fix it faulty?
TWRP 3.0.2-0 (TeamWin) for zenfone 2 laser!
ALSO DO NOT FLASH WITH ADB! Help me. :crying::crying::crying::crying::crying:
Hey,I dont know if u found the answer yet
TWRP can just flash unofficial rom
not official rom
if you want official rom
you have to use oem recovery...not twrp
I m look for answer too...that is all i know
TWRP can install both Stock Or Custom Roms...it is based upon the update-script...
I had an issue where I could install any of the cyanogenmod 13 nightly updates past June 14th on my phone, a ze551kl. I resolved the issue by updating to the OEM ROM 21.40 from the Asus website. Hopefully this is helpful.
I downloaded the following files from the?*Asus website and copied them into the?*SD Card?*of my phone:
- UL-Z00T-WW-1.16.40.763-user.zip
- UL-Z00T-WW-1.17.40.1234-user.zip
- UL-Z00T-WW-21.40.1220-1615-user.zip
- UL-Z00T-WW-21.40.1220-1794-user.zip
I then used fastboot to install the stock recovery image. After installing the stock recovery, I rebooted into recovery mode and installed 1.16 and restarted the phone. After the phone booted into 1.16, I rebooted into recovery and installed 1.17, etc . . . until I updated to 21.40.1220-1794.
After the last update, I replaced the stock recovery with TWRP and l was able to install the latest nightlies. It seems like installing 21.40 was the key to fixing this issue.
An important side note : I downloaded the WW ROMs because my phone is a WW region. If your phone is from a different region, you will need to download the appropriate ROMs.
Good luck with your phone.
Hi guys, How can I upgrage to nougat if my device is roote?
My device is rooted with TWRP recovery..
Can I upgrade to nougat even with TWRP? or we need the stock recovery image?
Where can I get a stock recovery image?
yes it's possible i just did it not to long ago, let me grab the link i used
here you go:
https://forum.xda-developers.com/ze...ougat-unlock-bootloader-t3628935#post72849410
I think you need to get the stock recovery image and flash it from the ROM image in the "convert cn to ww" thread.
Hello.
Couple months ago i started playing around with my p8 i unlocked bootloader flashed twrp make backup of rom (yes without a stock recovery) and i flash cm13.
And here is my problem i want to go back to stock i can easyli flash my stock rom from twrp from backup but then when i want to flash anything else for example another rom with lower android version it's gettong bootloop i even make full flash (every partiton from same update.app) but nothing still bootloop.
And here is strange part in custom rom i flashed supersu it worked great so i wanted it on my stock backuped rom what i'm able to flash and flashing supersu gives me nothing it booting normali not two or three times and after boot it doesn't see root.
Can you tell me where is the problem? I can still use phone with twrp and stock backup rom but i want go in lower android version and i can't.
Pleas help!
Thank you