Related
Overview:
This thread is a guide on how to fix the apply_patch_check error message experienced during an upgrade of the Android OS. Specifically, this will detail the steps for an upgrade of Jelly Bean from 4.1.1 to 4.1.2 on the Nexus 7 with CWM Recovery for a user of Windows. I'm sure similar steps will work for other recoveries/upgrades/devices and PC OSes.
You should only bother with this if you don't want to flash the entire system.img file to your phone, which is way easier.
Here is an example of the error message I'm talking about:
Code:
assert failed: apply_patch_check("/system/app/Chrome.apk", "819b34b66335c6faec86404d736a002b8871600", "9d6b55e63b0bf20bea433fb1ee7089f88ab73fb6")
E: Error in /sdcard/03a4eaf95f73.signed-nakasi-JZO54K-from-JRO03D.03a4eaf9.zip
(Status 7)
Installation aborted.
A few notes about the error:
This doesn't have to happen with the Chrome.apk specifically -- it could happen with any app in /system/app or .so in /system/lib.
Those random strings of numbers/letters are SHA-1 hashes of the apk.
The first one is the hash of the apk installed on your device. In my example, this happens to be the version of Chrome that comes with JB 4.1.2.
The second one is the expected hash of the apk that comes with JB 4.1.1.
Cause of the problem:
The reason this error occurs is because the file was somehow modified from its original state. In my case -- and most likely your case -- this was done by Titanium Backup. TB has an option to "Integrate updates of system apps into ROM", which will cause the apk in /system/app (and associated library files in /system/lib, if needed) to be overwritten with the updated apk.
Solution:
Download this zip file which contains the full /system/app and /system/lib directory from the JB 4.1.1 factory image. *
Extract the zip to a location of your choosing on your PC.
In the extracted folder, locate the .apk or .so file referenced in the error message on your device.
Copy this file to your device via your preferred method (USB cable works fine). I put my file in /sdcard/Download.
On your device, use a root file explorer to move the file from /sdcard/Download to /system/app (or /system/lib).
If you don't have a program that can do this, I use ES File Explorer. Be sure to go to Settings > Root Settings and turn on Root Explorer, Up to Root, and Mount File System.
Reboot into your Recovery and try to install the update again.
Repeat steps 3-6 for each subsequent file that produces an error. You will basically need to do this for each app you integrated using TB and maybe a few library files, too. **
* Future updates (above 4.1.2):
Since I won't be keeping the zip file from step #1 up-to-date, here's how to get the directories that I included in the zip for yourself:
Obtain a factory image for your device's current Android version (the version you're updating from).
For JB 4.1.1, this file is called nakasi-jro03d-factory-e102ba72.tgz.
If you're reading this guide at a later date, the JB 4.1.2 file is called nakasi-jzo54k-factory-973f190e.tgz.
You can try your luck at the official Google site, but they seem to only provide the version you're trying to update to, not from.
Extract the .tgz file somewhere on your PC.
Locate the image-naksi-jro03d.zip file and extract that, as well.
In the folder you just extracted from the previous step, located the system.img file.
Download and use a program called sgs2toext4 (View attachment 645320) to convert the system.img to system.ext4.img. ***
Download and use a program called Linux Reader to open system.ext4.img.
Do this by going to Drives > Mount Image > Next > select your file.
It will then be listed under the Hard Disk Drives section in red as "Linux Ext Volume 1".
Navigate to: Linux Ext Volume 1/system.
Right-click on the app (or lib) directory and pick Save > Next > Output to dir of your choice.
You now have the directories that were included with the zip file from Solution step #1, so just follow those steps now.
** How to avoid repeating steps:
If you'd rather not have to try to reinstall after updating only one file, just to find another file that needs updating, try this:
Obtain the /system/app and /system/lib folders from the factory image and save them to your PC.
For the sake of this guide, let's say you save them to C:\factory_app and C:\factory_lib.
Copy the /system/app and /system/lib directories from your phone to your PC.
For the sake of this guide, let's say you saved them to C:\phone_app and C:\phone_lib.
Download the File Checksum Integrity Verifier utility from Microsoft.
Start > Run > cmd
fciv.exe -sha1 -xml factory_app.xml -wp C:\factory_app
fciv.exe -sha1 -xml factory_app.xml -v -bp C:\phone_app
Don't ask me why, but you need to use -bp instead of -wp for the second command.
Don't forget the -v on the second command.
The output of the last command will show you the list of files that are different. These are the files you need to take from C:\factory_app and put into the /system/app directory on your phone.
Do the same for the lib directories (just replace all instances of "_app" with "_lib" in the previous commands).
Summary:
I hope that this post helped some of you who really didn't want to have to flash the system.img or wipe your device just to update. In the future, use TB to back up the original.
I wouldn't normally bother writing up a guide like this (it took almost as long to write as it did to figure out how to do this) but I couldn't find this solution anywhere even though I saw that I wasn't the only person with the problem. Sorry for not posting this guide sooner (update has been out for a while now), but the forum required me to make a bunch of useless spam posts before I could include any links in my guide and I didn't get around to making those posts right away.
*** I would like to thank balamu96m for his guide on extracting data from the system.img file and drphrozen for making the sgs2toext4 program.
Thanks for this. Will try now.
Worked great. Had to copy the apk and odex file.
Good job! It's great to see the steps for Windows users!
Just a heads up that I simply extracted the files I needed from and on my N7 using Root Explorer, without using my PC at all.
Great guide! Method worked perfectly on my Nexus 7 going from 4.1.2 to 4.2, thanks
Please... is there some other way to update the files w/o installing Java on my Windoze PeeCee? I accidentally messed up my YouTube.apk with Titanium Backup... now I can't update from 4.1.2 --> 4.2 JB.
EDIT: JavaPortable FTW... updating (fingers crossed)
EDIT: SUCCESS TY OP!
For anyone who flashed the 4.2 clock/keyboard already
Hey, for anyone who flashed the 4.2 clock and keyboard on their Nexus 7 already and need to roll back to do the 4.2 update, I used OP's method to make a flashable zip that puts the 4.1.2 clock and keyboard back.
Worked perfectly for my Nexus 7 to get me up and running. Hope it helps anyone!
cantthinkofa.com/files/RestoreClockKeyboard.zip
galaxy nexus
Hi can you post a guide for galaxy nexus? Or if it is the same, can you post the link of JB factory image for galaxy nexus? Sorry, I can't find any thread for galaxy nexus, and I don't want to complete flash the stock image since I don't want to wipe my phone.
Thanks in advance!
Nice Guide
perfect, the guide works just fine. Now finally running 4.2.
Awesome guide... Thanks... Happily running 4.2 now aften beeing stuck at libutils.so...
Sent from my Nexus 7 using xda premium
damagno said:
Hi can you post a guide for galaxy nexus? Or if it is the same, can you post the link of JB factory image for galaxy nexus? Sorry, I can't find any thread for galaxy nexus, and I don't want to complete flash the stock image since I don't want to wipe my phone.
Thanks in advance!
Click to expand...
Click to collapse
I don't have a Galazy Nexus, but I think the steps should be the same. Here is a link to the factory images: https://developers.google.com/android/nexus/images#takju . It looks like they now have links for older versions, rather than just the newest images (which is how it was when I made my guide). So that's pretty sweet.
Thanks a lot man, i succeeded to "patch" my system files to update from 4.2 to 4.2.1. I first check what files didn't correspond with fciv (9 files counting both apks and odex) and then replaced them in system/app. In fact they were the apps I previously integrated with tb (learned lesson: never do it if you want to remain stock and receive OTAs). I also noticed many not-matching files in system/lib but i didn't touch them and the update went smooth the same.
Another thing: when in the OP you say it's way easier just to reflash the system.img you mean just run from bootloader "fastboot flash system system.img" (taken from the factory image as usual) or there's some other thing to do in order to fix the system partition in the right way?
GallStones said:
Thanks a lot man, i succeeded to "patch" my system files to update from 4.2 to 4.2.1.
Click to expand...
Click to collapse
I was wondering if you could tell me how you did it? I'm searching a way to install 4.2.1 with no avail as of yet :crying:
GallStones said:
Thanks a lot man, i succeeded to "patch" my system files to update from 4.2 to 4.2.1. I first check what files didn't correspond with fciv (9 files counting both apks and odex) and then replaced them in system/app. In fact they were the apps I previously integrated with tb (learned lesson: never do it if you want to remain stock and receive OTAs). I also noticed many not-matching files in system/lib but i didn't touch them and the update went smooth the same.
Another thing: when in the OP you say it's way easier just to reflash the system.img you mean just run from bootloader "fastboot flash system system.img" (taken from the factory image as usual) or there's some other thing to do in order to fix the system partition in the right way?
Click to expand...
Click to collapse
Yes. I am having the same issue. I cannot update mine from 4.2 to 4.2.1. I wonder to know which original stock image you have used. Can you list a detail procedure?
Thank you very much.
Ric
dev/block/param
legom said:
Overview:
This thread is a guide on how to fix the apply_patch_check error message experienced during an upgrade of the Android OS. Specifically, this will detail the steps for an upgrade of Jelly Bean from 4.1.1 to 4.1.2 on the Nexus 7 with CWM Recovery for a user of Windows. I'm sure similar steps will work for other recoveries/upgrades/devices and PC OSes.
You should only bother with this if you don't want to flash the entire system.img file to your phone, which is way easier.
Here is an example of the error message I'm talking about:
Code:
assert failed: apply_patch_check("/system/app/Chrome.apk", "819b34b66335c6faec86404d736a002b8871600", "9d6b55e63b0bf20bea433fb1ee7089f88ab73fb6")
E: Error in /sdcard/03a4eaf95f73.signed-nakasi-JZO54K-from-JRO03D.03a4eaf9.zip
(Status 7)
Installation aborted.
A few notes about the error:
This doesn't have to happen with the Chrome.apk specifically -- it could happen with any app in /system/app or .so in /system/lib.
Those random strings of numbers/letters are SHA-1 hashes of the apk.
The first one is the hash of the apk installed on your device. In my example, this happens to be the version of Chrome that comes with JB 4.1.2.
The second one is the expected hash of the apk that comes with JB 4.1.1.
Cause of the problem:
The reason this error occurs is because the file was somehow modified from its original state. In my case -- and most likely your case -- this was done by Titanium Backup. TB has an option to "Integrate updates of system apps into ROM", which will cause the apk in /system/app (and associated library files in /system/lib, if needed) to be overwritten with the updated apk.
Solution:
Download this zip file which contains the full /system/app and /system/lib directory from the JB 4.1.1 factory image. *
Extract the zip to a location of your choosing on your PC.
In the extracted folder, locate the .apk or .so file referenced in the error message on your device.
Copy this file to your device via your preferred method (USB cable works fine). I put my file in /sdcard/Download.
On your device, use a root file explorer to move the file from /sdcard/Download to /system/app (or /system/lib).
If you don't have a program that can do this, I use ES File Explorer. Be sure to go to Settings > Root Settings and turn on Root Explorer, Up to Root, and Mount File System.
Reboot into your Recovery and try to install the update again.
Repeat steps 3-6 for each subsequent file that produces an error. You will basically need to do this for each app you integrated using TB and maybe a few library files, too. **
* Future updates (above 4.1.2):
Since I won't be keeping the zip file from step #1 up-to-date, here's how to get the directories that I included in the zip for yourself:
Obtain a factory image for your device's current Android version (the version you're updating from).
For JB 4.1.1, this file is called nakasi-jro03d-factory-e102ba72.tgz.
If you're reading this guide at a later date, the JB 4.1.2 file is called nakasi-jzo54k-factory-973f190e.tgz.
You can try your luck at the official Google site, but they seem to only provide the version you're trying to update to, not from.
Extract the .tgz file somewhere on your PC.
Locate the image-naksi-jro03d.zip file and extract that, as well.
In the folder you just extracted from the previous step, located the system.img file.
Download and use a program called sgs2toext4 (View attachment 645320) to convert the system.img to system.ext4.img. ***
Download and use a program called Linux Reader to open system.ext4.img.
Do this by going to Drives > Mount Image > Next > select your file.
It will then be listed under the Hard Disk Drives section in red as "Linux Ext Volume 1".
Navigate to: Linux Ext Volume 1/system.
Right-click on the app (or lib) directory and pick Save > Next > Output to dir of your choice.
You now have the directories that were included with the zip file from Solution step #1, so just follow those steps now.
** How to avoid repeating steps:
If you'd rather not have to try to reinstall after updating only one file, just to find another file that needs updating, try this:
Obtain the /system/app and /system/lib folders from the factory image and save them to your PC.
For the sake of this guide, let's say you save them to C:\factory_app and C:\factory_lib.
Copy the /system/app and /system/lib directories from your phone to your PC.
For the sake of this guide, let's say you saved them to C:\phone_app and C:\phone_lib.
Download the File Checksum Integrity Verifier utility from Microsoft.
Start > Run > cmd
fciv.exe -sha1 -xml factory_app.xml -wp C:\factory_app
fciv.exe -sha1 -xml factory_app.xml -v -bp C:\phone_app
Don't ask me why, but you need to use -bp instead of -wp for the second command.
Don't forget the -v on the second command.
The output of the last command will show you the list of files that are different. These are the files you need to take from C:\factory_app and put into the /system/app directory on your phone.
Do the same for the lib directories (just replace all instances of "_app" with "_lib" in the previous commands).
Summary:
I hope that this post helped some of you who really didn't want to have to flash the system.img or wipe your device just to update. In the future, use TB to back up the original.
I wouldn't normally bother writing up a guide like this (it took almost as long to write as it did to figure out how to do this) but I couldn't find this solution anywhere even though I saw that I wasn't the only person with the problem. Sorry for not posting this guide sooner (update has been out for a while now), but the forum required me to make a bunch of useless spam posts before I could include any links in my guide and I didn't get around to making those posts right away.
*** I would like to thank balamu96m for his guide on extracting data from the system.img file and drphrozen for making the sgs2toext4 program.
Click to expand...
Click to collapse
my error 7 was generated by emmc: dev/block/mmdblk0p7 (the file is "param" any suggestions?
Thanks. After searching for a lot of time, this post helped me updating my SGS3.:victory: I previously tried to integrate youtube update into rom using titanium backup.
GallStones said:
Another thing: when in the OP you say it's way easier just to reflash the system.img you mean just run from bootloader "fastboot flash system system.img" (taken from the factory image as usual)
Click to expand...
Click to collapse
Yes, that's what I mean. The reason I didn't want to do this on my device is because I had modified some other system files that I wanted to keep the modifications for.
Wow, thanks a lot OP! Your guide helped me fixing an error during the update to 4.2.2 on my Nexus 4.
please include a video ,im getting lost in the details
solved.
DISCLAIMER
The process of flashing a custom recovery/kernel/firmware may and will trigger your device's Knox Counter. Neither XDA nor I can be held responsible for your actions. Proceed with caution. During this process you will lose all your settings and apps. As long as you follow the instructions, your device's storage, internal and external, won't be touched
Still not compatible with x64 systems! Not compatible with Samsung 5.1.x (sdk22) ROMs!
Hello, Ladies and Gentleman
Many people seem to have a hard time to understand how all of this here on XDA works. I constantly get PM's from users, asking how to do the most basic stuff like flashing a .zip or stock firmware via Odin. Usually, I don't even read them and just hit delete. I know it's not ok to deny people help, so I decided to show you how you can get Xposed working on your TW based stock or custom ROM since it's the most frequently asked question I get.
It's nothing you couldn't do if you'd just....
We're going to use @arter97's customized Xposed Framework as the one made by @darkera13 needs the user to manually modify and replace files which may be too complicated for some.
Preparation
-READ EVERYTHING OVER AND OVER AGAIN.
-A custom recovery System like TWRP or CWM (PhilZ or Stock)
-A deodexed ROM. It's the only way to go. YOU NEED A DEODEXED ROM. If your ROM is not deodexed and you flash the framework, you'll end up in a bootloop. To deodex your existing ROM carefully follow Post #2
Here are a few made by XDA Senior Member @_alexndr
Stock deodexed for SM-N9005 Galaxy Note 3 International Qualcomm.
Stock deodexed for SM-G900F Galaxy S5 International Qualcomm
-And the framework itself from here
[UNOFFICIAL] Xposed for Samsung Lollipop by arter97
-Flash a custom recovery system of your choice. This is listed under preperation on purpose since this guide is about getting Xposed on your TW Lollipop device. A guide on how to get a custom recovery system is most certainly available in your device's forum.
-Store the ROM and the Framework in an easy to find folder, which we're gonna call "folder x". It doesn't matter where you store it (ext. SD or int. SD)
The Fun Part
-Boot into your custom recovery and make a full wipe:
TWRP users: "Wipe>Advanced Wipe> Tick System, Data, Cache, Dalvik Cache> Slide to format.CWM users: "Mounts and Storage> hit Format /System; hit Format /Data; hit Format /Cache.
-Still in recovery system, install, or flash the files we put in folder x;
TWRP users: "Install> Navigate to folder x and choose the ROM file first> Add Zip> now choose the Xposed Framework from folder x> Slide to flash.CWM users: "Install Zip> Choose zip from /sdcard if folder x is on internalt storage or /storage/sdcard1 if folder x is on ext. storage (SD-Card)>choose the ROM file first> -Yes - install ROMXY.zip.Do the same with the Xposed Framework zip file.
-Still in recovery system, reboot device and wait for it to boot. It can take up to 20 minutes. Enjoy Xposed on your Samsung TouchWiz Lollipop ROM.
-Stuck in a bootloop? Try this and repeat the process.
XDA Senior Member @Honzze kindly pointed out to keep following in mind; You have to start JoelDroid Lollipop Batch Deodexer with Admin permissions. Otherwise this error might return "path variable" of Java "is not set".
Deodexing your existing ROM without having to flash an entire ROM
As the title says, with this awesome guide by XDA Senior Member @townsenk you don't have to reflash an entire new ROM to your device. Instead, youll just deodex those parts of your System which need to be modified in order to get Xposed working. You don't necessarily have to perform a full wipe if you do it this way. But if you encounter fc's or end up in a bootloop, you know what to do
Guide for this guide:
Regarding point 1: "...launch a DOS shell..." just means, you need to open the so called "CMD" programm in Windows. To "launch a DOS shell" or CMD from within a folder, you simply have to hold down the shift key and right click in that folder. The context menu will show an entry "open command window here". And that's it! (Windows XP users may have to search the internet for another solution)
For Galaxy S5 and Note 3 users: If ADB returns "device offline" or an empty line after "List of devices attached" make sure your using a USB 2.0 data cable on a USB 2.0 port
townsenk said:
How to DeOdex YOUR (...) Rom.
I would like to note that I appreciate all the work that developers have put forth in creating and maintaining modified Roms. there are some awesome feature rich implementations available. My intentions are not to be critical of any specific Rom or mod. Without the developers we would have nothing.
(...)
This method is very common knowledge I thought I'd just explain it in an easy to understand way.
Here is what you need.
A stock (...) ROOTED configurated phone. Debloat as needed. Set the phone up exactly how you like it with apps and such.
Make sure it's stable. (If you have issues before DeOdexing they will be there afterward!)
Here's the files you may need to make this happen
LBD2.4.zip
7-Zip
Installer template (at end of post)
1> Make sure ADB is working on your computer. USB debugging turned on. Create a folder to store your soon to be download system files and launch a DOS shell from that working folder. Working folder name should NOT contain spaces. With the phone hooked up you should be able to type adb shell and get a prompt.
2> Type these commands
adb pull /system/app app/
adb pull /system/priv-app/ priv-app/
adb pull /system/framework framework/
This will take awhile and you will be left with three folders
Create a new folder named "system" and place these three folders inside.
3> Extract and launch LBD2.4 (This is the DeOdexer and is AWESOME). Point it at your recently created "system" folder and let it do it's thing.
I'll assume this will occur without errors as I have never had any.
4> At this point you can manually apply modded apk's to the system folder but I don't really recommend it. They can be applied afterward using the seperate installer zips.
5> with 7-Zip installed open the provided Installer template. Do not Extract it. Just open it in the 7-Zip file browser using the right click context menu in windows.
Drag-Drop the contents of your system folder into the empty system folder in the 7-Zip browser It should be the three folders previously created but now they are Deodexed. Close the 7-zip file manager and select Yes if it asks you to save.
Note: The provided installer template has been modified to only wipe and replace the three system directories.
6. Copy the created installer to your sdcard and install with recovery. Wipe cache and Dalvik before rebooting.
Go have lunch. You will sit at a boot screen for about 10 minutes. Then another 20 to rebuild caches. Time varies.
7. Your system will now be Deodexed! At this point you can install your mods one at a time, I recommend this so you can test your system between installs to determine if a specific mod is creating problems.
This method has so far removed ALL of my stability issues.
Click to expand...
Click to collapse
Since I no longer own this device, I'm retiring from this thread as of now. Hope I could help you.
Don't know if someone can help me as you stated that you're retired from this thread.
I did every step you do mentioned here (for self deodexing existing rom)
I did everything successfully and deodexed my files with 2.5 deodexer, putted files in the system folder to the 7zip folder and sent to my device and flashed zip, cleaned cache and dalvik and it stuck on booting for about 15 minutes. I know, it takes alot time during rebuildup of cache, but guys, it's 15 minutes! for me, if i cleanup cache and the dalvik/art cache, it just takes 1minute on boot screen to show up the image of each apps cache, but i just sat there with lots of patient for 15 minutes or a bit more and still same, stuck in same crappy booting logo.
I did restore my system files, now i'll try to retry it and send it again. Im suspicious of the zip file being corrupted during trasmitting to Device, however install was a big success so im very sure it wasnt corrupted. I'll do 2nd test and see it again if it's happening again.
If it does, i'll most likely try to figure out other ways to deodex as there is already deodexed roms out there, so they must have done is somehow.
Thanks, hope someone can help me out with this.
P.S: My adb works fine, i got usb drivers for my device, i got usb debug on, i got lots of space on phone, i got TWRP recovery which got very high compatibility when it comes to install anything from zip via recovery where almost all roms do work stable with TWRP.
omg brilliant @nitrous² ! thanks so much! its been days i keep trying to deodex with others tool...
Sachitoge said:
Don't know if someone can help me as you stated that you're retired from this thread.
I did every step you do mentioned here (for self deodexing existing rom)
I did everything successfully and deodexed my files with 2.5 deodexer, putted files in the system folder to the 7zip folder and sent to my device and flashed zip, cleaned cache and dalvik and it stuck on booting for about 15 minutes. I know, it takes alot time during rebuildup of cache, but guys, it's 15 minutes! for me, if i cleanup cache and the dalvik/art cache, it just takes 1minute on boot screen to show up the image of each apps cache, but i just sat there with lots of patient for 15 minutes or a bit more and still same, stuck in same crappy booting logo.
I did restore my system files, now i'll try to retry it and send it again. Im suspicious of the zip file being corrupted during trasmitting to Device, however install was a big success so im very sure it wasnt corrupted. I'll do 2nd test and see it again if it's happening again.
If it does, i'll most likely try to figure out other ways to deodex as there is already deodexed roms out there, so they must have done is somehow.
Thanks, hope someone can help me out with this.
P.S: My adb works fine, i got usb drivers for my device, i got usb debug on, i got lots of space on phone, i got TWRP recovery which got very high compatibility when it comes to install anything from zip via recovery where almost all roms do work stable with TWRP.
Click to expand...
Click to collapse
Same happened to me.... Did you solved this problem?
Maurizio1953 said:
Same happened to me.... Did you solved this problem?
Click to expand...
Click to collapse
Nope, i ended up using CM12 (at that time, right now i got cm13 update).
Well i had to deodex apps to get xposed on TouchWiz, but i failed and didn't get headache because of the Xposed modules being not really well compatible on TouchWiz, so i jumped to CM, i find it more stable, and the CM13 is insane because it saves so much battery at stand by, compared to lollipop, the Android 6.0.1 Marshmallow is the biggest update in android history, that saves hell lot of battery (it can be also maybe because i don't have Xposed Framework in recent rom).
Anyway, im tired of it, and i don't need to hassle with Link2Sd because of Android Marshmallow offering to mount the SD Card, in the end, all my needs are being offered in this (for me) huge, best android update, being Marshmallow.
Try it i would say, so amazing.
Ok i would like to go to cm13 as you but i stil need the support to the gear s smartwatch so i decided to stay with touchwiz without xposed.
Welcome to a simple tutorial that will help OnePlus 2 (OP2) owners and possibly other device owners install custom ROMs in such a way that eliminates most, if not all possibility of system errors, resulting in the longest lasting and most stable custom ROM installations!
DISCLAIMER: Your Warranty was voided long before you were ever even ready to complete this tutorial.
Therefore, I am not responsible for a broken or bricked device, especially if your rage towards a bricked device caused you to throw your device into a wall. This tutorial is actually designed to reduce the amount of "Rage Quitting" on modifying your device.
This Tutorial assumes you have already completed OEM Unlock, Root, installed TWRP or other Custom Recovery, and are basically ready to install a custom ROM on your OP2.
Before beginning, backup any files you may need, I upload mine to my Google Drive then download after completing the ROM install. You can also use Nandroid to backup your current system (optional as there are methods to restore even the most bricked OP2 that doesnt even have a working recovery or OS, trust me I have done it at least 5 times because I constantly try new ROMs and mods). There are three necessary prerequisite steps required to complete before using this method to install your custom ROM. These prerequisites are listed below:
Prerequisite One: Ensure your OnePlus 2 has been FULLY updated on the stock Oxygen OS ROM before you install your TWRP or other Custom Recovery. If not, Return to factory ROM, Un-Root, and update until you cannot update any more, then return to this tutorial afterwards.
Prerequisite Two: Ensure your OnePlus 2 has the latest update of the TWRP or other Custom Recovery. The Latest TWRP for the OP2 can be found here: https://twrp.me/oneplus/oneplustwo.html
Prerequisite Three: Ensure your device can receive files via ADB PUSH while in custom recovery. To do this, reboot your phone into recovery, connect to PC, hold down the "Shift" key and while holding, right-click in a window containing a file you wish to transfer, and select "Open Windows PowerShell Here" or "Open Command Prompt Here". Use the command "adb push Lin15.zip /sdcard" (remove the quotes, "Lin15.zip" is an example file) to push the file onto your device. Then, if your custom recovery has a file explorer as TWRP does, use it to navigate to /sdcard and see if the file is there. Also, your windows should show a successful transfer and should say "Okay" underneath your command line. If unsuccessful, install OnePlus 2 Drivers along with Universal ADB drivers and then try again. If still unsuccessful, try TWRP 3.1.1-0 (Download Link Below 2 Paragraphs in Blue Text Section). If unsuccessful at this point, there is something wrong as Win 10 with OP2 Drivers, Universal ADB Drivers, and TWRP 3.1.1-0 is my exact setup.
There are many custom ROMs available for the OP2. The method for installing custom ROMs is generally the same, but can differ in certain ways. This method SHOULD work for your custom ROM, but is not guaranteed. If this method fails, then visit your custom ROM's development page, and follow their instructions instead.
In this Example, I will be installing the latest (at the time of writing) Lineage 15 Android Oreo 8.0 Third Alpha Build OS/ROM and will be including instructions for the proper installation of the A.R.I.S.E. Magnum Opus System Sound Mod (Based on Viper4Android). I will include links to downloads, but their main XDA page can be found here: https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709 This installation will use the latest (at the time of writing) TWRP 3.1.1-0 Custom Recovery.
INSTALL TIME:
Begin by rebooting into recovery. Under "Wipe" options, you will first want to format data, select the option and type "yes" when prompted to confirm the operation. Repeat this step once again to ensure a squeaky clean wipe.
Next, also under "Wipe" Options, select the "Advanced Wipe" Options. You will then select EVERY BOX (Yes, this includes Internal Storage and will wipe EVERY SINGLE FILE from your device, this is INTENTIONAL and is why you MUST have a device that can accept ADB PUSH files in recovery!). This will wipe every file from existence, completely. This is what allows such a stable, squeaky clean install, as not a single piece of evidence from any other ROM/OS will be left behind, leaving basically no chance for errors or conflicts during installation of new ROM. You will want to complete this step again to ensure a squeaky clean wipe.
Navigate to the TWRP Home/Start-Up Screen and connect your device to your PC (WARNING: DO NOT USE ADB SIDELOAD MODE!!! I HAVE NEVER, EVER HAD A SUCCESSFUL ROM INSTALL FROM SIDELOAD!!!). Simply leave the device at this screen, and do not touch it. At this point, if you do not have all the necessary files to install your custom ROM and mods, you will need to download them now. I ALWAYS recommend the "Pico" Gapps package if installed in a ROM (some ROMs include Gapps). The reason for this is because the Pico package includes the bare minimum to get Google Play Services and Google Play Store up and running. This eliminates unwanted Gapps and reduces the chance of installation conflicts. The golden rule is: The less you install in TWRP, the better. If you want more Gapps, then after setting up the phone at the end of the ROM install, just search for them in the Google Play Store, its how I get mine every time. In the case of Lineage 15, the list of downloads is below:
Lineage 15 OS/ROM: https://www.androidfilehost.com/?fid=961840155545594199 (Dev Page: https://forum.xda-developers.com/oneplus-2/development/rom-lineageos-15-0-t3668056)
Android Oreo 8.0 Pico Gapps Package: https://www.androidfilehost.com/?fid=817550096634796662
Super SU 2.82 Root Installer (Select the Flashable 2.82 ZIP file): http://www.supersu.com/download
BusyBox Flashable Zip Package (Large page with many tools, scroll down to find the BusyBox tool): https://forum.xda-developers.com/showthread.php?t=2239421
A.R.I.S.E. Magnum Opus System Sound Mod (Select the "ARISE+Deuteronomy+2.94+Modular+AROMA+Installer.zip" Option): https://www.androidfilehost.com/?w=files&flid=176171
Once all necessary files are downloaded, give them their own folder inside Windows and rename all of them to something simple as shown here:
View attachment 4273530
(Lin15.zip, Gap.zip, SU.zip, Busy.zip, Arise.zip)
Ensure your device is in custom recovery at the home/startup screen and is plugged firmly into your PC. DO NOT navigate ANYWHERE inside custom recovery or touch the device.
Now we will ADB PUSH these fresh install ZIP files over to your device. Inside the window containing your downloaded ROM files, hold down the "Shift" key and while holding, right-click and select "Open Windows PowerShell Here" or "Open Command Prompt Here". To ADB PUSH files, simply type "adb push FILE.zip /sdcard" where "FILE" is the target file and "/sdcard" is the target destination. Correct capitalization of letters is IMPORTANT! My window looked like this when finished:
View attachment 4273532
(adb push Lin15.zip /sdcard, adb push Gap.zip /sdcard, adb push SU.zip /sdcard, adb push Busy.zip /sdcard, adb push Arise.zip /sdcard)
Your ROM files should now appear on your device at your target destination. Disconnect your device and use the Custom Recovery File Explorer to navigate to the destination to confirm. "/sdcard" is the easiest to use destination.
Now we will install ALL of the ROM files, back-to-back with NO REBOOTS, NO WIPES, NO OPERATIONS WHATSOEVER INBETWEEN INSTALLS, THIS IS EXTREMELY IMPORTANT!!! Navigate to the Custom Recovery "Install" Section and navigate to your destination for your files. Flash the ZIP files in this order EXACTLY: Lin15, Gap, SU, Busy, Arise.
The A.R.I.S.E. Instillation is an AROMA style installer. It is a HUGE Sound Mod suite containing many options. Select the sound mods you like, but there is a module that is REQUIRED and 4 others that are highly recommended, listed below:
CORE Module is REQUIRED!!! Uninstall MusicFX, Remove Deep_Buffer, Set SELinux to Permissive, and SD Card Permissions fix are all highly recommended no matter what the ROM or mods, just in case. If these problems do not exist, selecting the options will not change anything, so do not worry.
My personal A.R.I.S.E. install included the following modules and delivers absolutely AMAZING sound quality while keeping installed modules to a minimum (otherwise known as a "Lightweight" install): Core Module, Viper4Arise 2.5.0.5, Viper4Arise Profiles, Uninstall MusicFX, Remove Deep_Buffer, Set SELinux to Permissive, and SD Card Permissions Fix. Its a highly recommended package
ONLY AFTER ALL FILES HAVE BEEN INSTALLED, navigate to Custom Recovery "Wipe" section, select "Advanced Wipe" and then check the "Dalvik Cache" and "Cache" options, DO NOT SELECT ANYTHING ELSE OR YOU WILL NEED TO START COMPLETELY OVER, WIPE PHONE AND RE-ADB PUSH FILES TO ENSURE A SQUEAKY CLEAN INSTALL!!! Perform this step again to ensure a squeaky clean wipe.
YOU ARE NOW FINISHED WITH A SQUEAKY CLEAN ROM INSTALL BUT THERE ARE A FEW MORE RECOMMENDED STEPS!
Recommended: DO NOT immediately reboot into system after install. Instead, navigate to Custom Recovery "Reboot" Section and select "Power Off" Instead. Once device is off, plug into A/C Outlet charger (DO NOT USE A PC, DETECTION OF PC WILL CAUSE DEVICE TO BOOT), and allow to fully charge, then cool off. This will ensure that Battery Calibration is set to 100% upon Initial Boot
Initial Boot: Boot Device, Initial boot will take around 5-10 minutes. DO NOT TOUCH THE DEVICE DURING THIS TIME. When you see the startup screen, STILL DO NOT TOUCH THE DEVICE! Instead, allow device to sit and idle, allowing the ROM to "Settle" for a MINUMUM of 5 minutes, 10 is recommended. Then, BEFORE setting up the device, reboot and allow another 5 minutes of "settling".
Run through the Device Initial Setup. You will want to select any desired options now, and avoid having to search settings later. Once at Device Home Screen, immediately open app drawer and select SuperSU app. Inside SuperSU, navigate to settings and apply the following options:
Disable Re-Authentication, Default Access: Grant, Enable SU During Boot, Trust System User
These SuperSU options will allow mods to function with complete stability and no interference, leading to a smoother experience. After, completing this step, Reboot your phone and ENJOY YOUR NEW, ROCK-SOLID, STABLE ROM INSTALL!!!
Nice job bro thanks working here!
Nopes. It did not work out for me. I flashed ROM, Gapps, and Magisk before and landed on your thread and flashed only the ARISE zip. But it did not flashed properly and I got an error 1 or something like that. What could be the reason?
Why are people recommending using adb push to get the files on the phone.
I always just drag and drop them on the phone in windows explorer, never had any problems.
Only time I ever need adb is for flashing recovery.
shailinder said:
Nopes. It did not work out for me. I flashed ROM, Gapps, and Magisk before and landed on your thread and flashed only the ARISE zip. But it did not flashed properly and I got an error 1 or something like that. What could be the reason?
Click to expand...
Click to collapse
Now I tried it again and this time flashed busy box as well but the same error.
Screen shot for your reference. Is there another way to install it?
shailinder said:
Nopes. It did not work out for me. I flashed ROM, Gapps, and Magisk before and landed on your thread and flashed only the ARISE zip. But it did not flashed properly and I got an error 1 or something like that. What could be the reason?
Click to expand...
Click to collapse
Error 1 is what occurs on the non-AROMA older A.R.I.S.E. package install if you have not set up any settings in the customizable .prop file that comes with the ZIP. Upon initial install, this "Error 1" will install a .prop file under /sdcard. If you open this .prop file with a text editor, you can then use examples such as "install.core=true" to install the core. However, the AROMA installer requires none of this. And as far as I experienced, NONE of the other packages work on Lineage 15. You will want to delete whatever A.R.I.S.E. zip you have now, and follow my download link for the AROMA version. Then, wipe everything and perform a "Squeaky Clean" ROM install as shown in this thread, and it should work and be rock-solid stable.
pops106 said:
Why are people recommending using adb push to get the files on the phone.
I always just drag and drop them on the phone in windows explorer, never had any problems.
Only time I ever need adb is for flashing recovery.
Click to expand...
Click to collapse
Well we all know performing this method of install is not a requirement for installing ROMs, but it is the most fool-proof method and ensures there are no file conflicts between old and new ROMs/OS's. I cannot even tell you how many times I have done quick, minimal work installs and end up with tons of errors, laggy or freezing screens at random times, force closing apps, busybox system link failures, the list goes on and on. After using the "Squeaky Clean" method, I can honestly say Lineage 15 is as stable as the Stock/Factory Oxygen OS.
wallacengineering said:
Error 1 is what occurs on the non-AROMA older A.R.I.S.E. package install if you have not set up any settings in the customizable .prop file that comes with the ZIP. Upon initial install, this "Error 1" will install a .prop file under /sdcard. If you open this .prop file with a text editor, you can then use examples such as "install.core=true" to install the core. However, the AROMA installer requires none of this. And as far as I experienced, NONE of the other packages work on Lineage 15. You will want to delete whatever A.R.I.S.E. zip you have now, and follow my download link for the AROMA version. Then, wipe everything and perform a "Squeaky Clean" ROM install as shown in this thread, and it should work and be rock-solid stable.
Click to expand...
Click to collapse
Thanks. I got it install using a different method and it is working wonderfully.
wallacengineering said:
Error 1 is what occurs on the non-AROMA older A.R.I.S.E. package install if you have not set up any settings in the customizable .prop file that comes with the ZIP. Upon initial install, this "Error 1" will install a .prop file under /sdcard. If you open this .prop file with a text editor, you can then use examples such as "install.core=true" to install the core. However, the AROMA installer requires none of this. And as far as I experienced, NONE of the other packages work on Lineage 15. You will want to delete whatever A.R.I.S.E. zip you have now, and follow my download link for the AROMA version. Then, wipe everything and perform a "Squeaky Clean" ROM install as shown in this thread, and it should work and be rock-solid stable.
Click to expand...
Click to collapse
Fair enough
And thanks to the opp for the thread
pops106 said:
Fair enough
And thanks to the opp for the thread
Click to expand...
Click to collapse
No problem, the thread was a random idea after accidentally stumbling across the fact that TWRP can accept ADB PUSH files. I honestly had no idea, and was stuck in a bootloop after a custom ROM failed to install correctly. I had no backup and was getting ready to just give up, enter Qualcomm Diagnostics Mode and perform the Oxygen OS Firmware/Software OEM install when I decided to reboot into Recovery and attempt SideLoad of a previous ROM that had worked.
This did not work, as sideload is apparently a dumb way of doing things. I never understood why sideload tries to install a file that is in the middle of transferring. Just seems like a flawed concept to me. Anyways the install was very slow, buggy and laggy, and when finished had installed such a corrupt system, due to installing a partially transferred file while it is being transfered and then sticking all the pieces together, was so unstable that more than a minute idling at the home screen or any attempt to open ANY app caused the phone to reboot.
Sideload is a worthless feature in my opinion and I will never use it for any operation ever again so long as I live. So all of a sudden I decide to plug the phone into my PC while in recovery and observe how Windows detects the phone when you turn Sideload mode on and off, as to try and troubleshoot my sideload to get an effective install (which by the way will never happen, to this day I have never had a sideload install work correctly), and noticed when I turned it off, the device still showed up as a recognized Android device under Windows Device Manager. Then, you may not believe me on this, but I did actually randomly decide that more than likely, it was interfaced on Universal ADB, and that it I typed "adb devices" into a windows command prompt, it should show, and it did. The rest is history.
I know the feature had been around for some time as I found out later on, but I had never seen any information about it anywhere on any thread, and even when I asked for ideas for troubleshooting, while XDA users helped for sure, I guess they just didnt have that idea, and gave me alternative routes as well such as the Qualcomm Diagnostics full OEM wipe method which I was already familiar with. This does show, however; that experimenting and troubleshooting on your own can be a great way to learn new things!
Hi, thank you for the post.
I am enjoying v4a bcoz of you only.
I got a query btw, can I install dolby & atmos along with v4Arise?
Please add a note for HaruhiOS
HaruhiOS checks if a clean flash is required before flashing and will abort to tell the user that a clean flash is necessary if ever. It is my design goal to avoid the need for clean flashing as much as possible
Due to this the user should avoid unnecessary clean flashing, which actually ruins performance and battery life and reduces device health when using my ROM
if already.....
hey,
if one would already go thus far to wipe internal storage as well, i'd say that it's making sense to format storage by changen from ext4 to ext2 and back to ext4. wiping is not always getting us rid of all residues while changing the file system and going back to the one we want/need does indeed reformat everything, this is a procedure that is useful once the storage card is corrupted.
magnamentis said:
hey,
if one would already go thus far to wipe internal storage as well, i'd say that it's making sense to format storage by changen from ext4 to ext2 and back to ext4. wiping is not always getting us rid of all residues while changing the file system and going back to the one we want/need does indeed reformat everything, this is a procedure that is useful once the storage card is corrupted.
Click to expand...
Click to collapse
Apparently e2fsck and fsck.f2fs is too hard
Once the storage card is corrupt no formatting will help you anyways
Just stop believing in dumb stuff. If you have to clean flash every other build a ROM developer releases they messed up big time and they should fix their code
Hi, I created this thread because I noticed that more and more people are experiencing the bootloop after flashing gapps on rom 8.1.0 Oreo.
If you experience bootloop after installation oreo, just do everything according to the instructions.
What you will need:
- adb and fastboot,
- notepad++;
1. -- clean flash rom you want to install,
2. -- flash newest gapps ARM64, you can download it here - https://opengapps.org
3. -- don't start the device, in TWRP go to mount, and select "system",
4. -- connect your phone to your computer and run fastboot and adb as administrator,
5. -- type:
Code:
adb pull /system/build.prop
now in the folder with fastboot you will have the build.prop file,
6. -- open build.prop with Notepad ++ and find "ro.setupwizard.mode = OPTIONAL", replace it with "ro.setupwizard.mode = DISABLED" and save it,
7. -- now in fastboot type:
Code:
adb push build.prop /system/
adb shell
cd system
chmod 644 build.prop
8. -- reboot device.
now there will be no bootloop, but you will not see wizard setup, you have to configure the phone manually.
Most roms already have this fixed anyway, I haven't come across any that haven't yet.
Exanneon said:
Most roms already have this fixed anyway, I haven't come across any that haven't yet.
Click to expand...
Click to collapse
Possible, but it does not happen to everyone, I, for example - I have this problem on AospExtended, FireHound and many other roms released after March, I have no idea why it is, most people do not have bootloops, but some people, including me, have problem, that's why it is better to have one guide here than on one of the pages of the topic of some rom.
I see, I suppose that's just to do with your model, mine is XT1675 and the only rom I've had this issue with was bootleggers rom, however, a recent update had fixed this.
With the recent AOSP Extended rom I still have this problem but changing the build prop doesn't work as it turns back to OPTIONAL on boot for some reason, any idea?
EDIT: changed from optional to disabled and it worked
Before following this guide, you'll want to grab the MSM unbricking tool, specifically for this device (not the global or other Oneplus 8 versions). Use it if you brick yourself.
Here's how I got microG to work on my Visible Oneplus 8 running Oxygen OS 11:
Unlock the boot loader and flash Lineage's instantnoodle recovery (The small recovery image ~96MB, not the large rom file)
Reboot into recovery and adb sideload the Magisk zip file, from the recovery's 'Apply Update'.
Follow this guide to enable signature spoofing, but with the following few changes:
Place this specialized hook services file ( 11-hook-services-OxygenOS.jar.dex ) in the same folder as 11-hook-services.jar.dex.
When you get to the `java -jar` command in the guide, do this instead:
Code:
java -jar dexpatcher-1.8.0-beta1.jar -a 11 -M -v -d -o ./ services.jar 11-hook-services-OxygenOS.jar.dex 11core-services.jar.dex
Do not install the microG provided in the guide! But go ahead and install your `spoof_AVDapi30.zip` through magisk as the guide says.
Confirm that signature spoofing is working (you can download Signature Spoofing Checker from F-droid)
Inside the magisk app, search for and install the plugin "microG installer Revived". Reboot.
Grant microG all the permisisons that you can in microG settings' Self-Check.
Tap and install GmsCore.apk located at '/system/priv-app/GmsCore/". You need to do this step even though its already installed because until you do this, it will only be installed as a system app. Doing this installs it as a user app, which fixes the location permission issue (somehow this issue is encountered). If it doesn't fix it right away you may need to reboot.
Open the microG settings again, and give yourself the location settings (and SMS if still needed)
I hope this helps someone. I know I had a lot of frustration because so much that works for other instantnoodles simply doesn't work on this device. Instantnoodle custom roms like lineageOS (as of writing this) and automated patchers like smali and nanodroid don't work, so at least we have this one option.
Ciao @Calebdvn
Trying to apply this fix on OP6 OOS11.1.2.2 but nothing happends
trying the standard method I were stuck at bootlogo, using this file the system volta, but, signature spoofing Is not working
Caould you kindly support me ?