When i try to flash latest firmware from sammobile using odin 3v3.13 it wont go past boot img????
Im losing my mind trying can someone please help me
adzo73 said:
When i try to flash latest firmware from sammobile using odin 3v3.13 it wont go past boot img????
Im losing my mind trying can someone please help me
Click to expand...
Click to collapse
Hello, I had the same problem.
Before you flash restore your phone to factory default ....settings.....general ......
or by stock recovery mode ...... https://android.gadgethacks.com/how...s10-into-recovery-mode-download-mode-0194521/
and perform a factory data reset .
Then I flashed with Odin 3.13. only the AP_File. (AP_G975FXXS3ASH1_CL16487975_QB25171324_REV01_user_low_ship_meta_OS9.tar)
This is the latest official Firmware for Samsung 10+ (Exynos).... SM-G975F_1_20190805141127_n52ujmrqr9_fac
Best regards
Antonio
granada_es said:
Hello, I had the same problem.
Before you flash restore your phone to factory default ....settings.....general ......
or by stock recovery mode ...... https://android.gadgethacks.com/how...s10-into-recovery-mode-download-mode-0194521/
and perform a factory data reset .
Then I flashed with Odin 3.13. only the AP_File. (AP_G975FXXS3ASH1_CL16487975_QB25171324_REV01_user_low_ship_meta_OS9.tar)
This is the latest official Firmware for Samsung 10+ (Exynos).... SM-G975F_1_20190805141127_n52ujmrqr9_fac
Best regards
Antonio
Click to expand...
Click to collapse
I'm just doing this with this advice here, and only running the AP_File as advised. Hope the S10 doesn't get bricked because I have not loaded other files.
Also seems Odin is in state, SYSTEM, which is now so far 20mins and don't seem to see more progress
for those who updated the german beta (android 12), remember to unlock your bootloader in settings, because the knox get triggered after detecting different system files and the original bootloader, if u unlock the bootloader, it lets odin rewrite it and get the PASS
Related
Hi,
I tried to downgrade my Note 3 with CSC VIA to Kitkat VIA. Downloaded and flashed firmware from Sammobile. Didn't work. failed in ODIN though it finished.
I tried it again and now i can flash Kitkat with ODIN "passed" but I'm stuck in bootloop. Full wipe and cache clean in recovery won't work. Tried it a last time with Kitkat DBT version (debranded) and added a PIT file by Darklord for 1DBT. ODIN says passed but the bootloop still is there. Download mode is still available so i see some real chance to get it done.
Is it possilbe to debrand to DBT that easily or shall I stay on VIA? I never tried the PIT file for DBT with VIA firmware. Anyone has a clue what I might try to get it working again? Ah btw. Recovery and Download seems to be perfectly fine and Knox isn't triggered.
Your input is highly appreciated, thanks in advance!
peety25 said:
Hi,
I tried to downgrade my Note 3 with CSC VIA to Kitkat VIA. Downloaded and flashed firmware from Sammobile. Didn't work. failed in ODIN though it finished.
I tried it again and now i can flash Kitkat with ODIN "passed" but I'm stuck in bootloop. Full wipe and cache clean in recovery won't work. Tried it a last time with Kitkat DBT version (debranded) and added a PIT file by Darklord for 1DBT. ODIN says passed but the bootloop still is there. Download mode is still available so i see some real chance to get it done.
Is it possilbe to debrand to DBT that easily or shall I stay on VIA? I never tried the PIT file for DBT with VIA firmware. Anyone has a clue what I might try to get it working again? Ah btw. Recovery and Download seems to be perfectly fine and Knox isn't triggered.
Your input is highly appreciated, thanks in advance!
Click to expand...
Click to collapse
Try this:
1. Full wipe first (system, data, cache and dalvik)
2. Flash the VIA Kit Kat firmware via ODIN unticking "Autoreboot".
3. Take out the battery and pull in it again when the flashing process finish.
4. Boot in Recovery and make full wipe again.
5. Reboot your device and it should boot normally.
6. Tell me if it worked for ya
Hi,
thanks for you input. I tried it - still the bootloop. So I made a try with the current version (installed before). This works - most likely because I'm unable to clean Dalvik with the standard recovery.
Anyhow in the end I'm not happy with the outcome because of the bluetooth issues of the new version. Anybody has a suggestion how to downgrade sucessfully - I'd happily install a CM12.1 as well but a nightly without installation advice seems to be a bit too much for me.
try flashing MODEM with NON-HLOS, I think you have corrupted the EFS.
peety25 said:
Hi,
thanks for you input. I tried it - still the bootloop. So I made a try with the current version (installed before). This works - most likely because I'm unable to clean Dalvik with the standard recovery.
Anyhow in the end I'm not happy with the outcome because of the bluetooth issues of the new version. Anybody has a suggestion how to downgrade sucessfully - I'd happily install a CM12.1 as well but a nightly without installation advice seems to be a bit too much for me.
Click to expand...
Click to collapse
You can flash TWRP recovery if you don't care about KNOX and follow my steps above :highfive:
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_ HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode and is detected by odin, but re flashing the firmware always fails and always boot loops on searching that firmware on google it belongs to the AT&T note 3.....is there a solution for this.....I know my way around flashing if am given instructions...please help
Look for instructions regarding soft brick, you'll just have to reflash via odin.
mjmbirige said:
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_ HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode and is detected by odin, but re flashing the firmware always fails and always boot loops on searching that firmware on google it belongs to the AT&T note 3.....is there a solution for this.....I know my way around flashing if am given instructions...please help
Click to expand...
Click to collapse
Flashing a N900A firmware in one N9005 is SUPER WRONG WRONG WRONG. Give a look here select one firmware good for your device and flash it via ODIN.
Joku1981 said:
Flashing a N900A firmware in one N9005 is SUPER WRONG WRONG WRONG. Give a look here select one firmware good for your device and flash it via ODIN.
Click to expand...
Click to collapse
thank you for the reply, am downloading this one...N9005XXUGPOF3...from Nordic countries...will it remove the AT&T bootloader
Who knows how to do downgrade from 5.1.1 to 4.4.2 on Tab 4 8.0 T33x ?
download aand flash the firmware with odin from here.
http://www.sammobile.com/firmwares/
make an account for download.
repey6 said:
Who knows how to do downgrade from 5.1.1 to 4.4.2 on Tab 4 8.0 T33x ?
Click to expand...
Click to collapse
wipe all exept internal/external
Mine is SM-T331. I have tried several ROM from multiple region but I could not downgrade it to 4.4.2. Flashing via Odin was successful, but it stucked at "SAMSUNG" and never booted to ROM,
mountaineer07 said:
Mine is SM-T331. I have tried several ROM from multiple region but I could not downgrade it to 4.4.2. Flashing via Odin was successful, but it stucked at "SAMSUNG" and never booted to ROM,
Click to expand...
Click to collapse
Do factory reset in recovery
repey6 said:
Do factory reset in recovery
Click to expand...
Click to collapse
I'm using stock ROM T331XXU1BOG4_T331ODD1BOG4_INU. I did factory reset before flashing 4.4.2 ROM package via Odin. Even with T331XXU1ANDA_T331ODD1AND4_INU (same region), it did not work.
mountaineer07 said:
I'm using stock ROM T331XXU1BOG4_T331ODD1BOG4_INU. I did factory reset before flashing 4.4.2 ROM package via Odin. Even with T331XXU1ANDA_T331ODD1AND4_INU (same region), it did not work.
Click to expand...
Click to collapse
Repeat wipe now in stock recovery
Temorarily stuck with 5.1.1 for now. I will try repey6's suggestion later.
Many thanks.
bump, does 5.1.1 prevent u from downgrading to 4.4.2? the tablet was updated to 5.1.1 by accident, so i want to downgrade.
EDIT: i was able to downgrade just fine. if your hangs at the smasung boot logo for like 5 mins, power off device and clear the partitions/ data.
I don't think u can downgrade from OI1 according to Smart Switch. So i think i had BOG1
Any success on a sm-t337v??
none yet so far, we i had combination files i could try it again but i cant find any or have access to any for 337v
Dear xda users,
I have a big problem with my Samsung S7 Edge G935F!
Yesterday my phone restarts continuously so I used Odin to flash Firmware Stock. First, I used this Firmware: http://forum.xda-developers.com/s7-edge/how-to/official-stock-firmware-update-odin-t3335065 .
Odin doesn't show any errors and my phone restarts; but after Samsung S7 Edge Boot Splash Screen, the phone shows a screen with yellow triangle and Android dead and then, phone restarts in Stock Recovery Mode.
In the Recovery mode when I press Reboot System Now or PowerOff, appears "Verifying DMVerity Hash Tree..." and then "Failed" and my phone restarts again in Recovery.
I tried Wipe data and cache but Nothing!
Then I tried to repair firmware with Kies 3: No errors but my phone won't boot!!
And then I tried another firmware file with Odin but nothing!
The phone is Completely Stock! Recovery Mode and Download Mode work and the phone is recognised by PC.
Please help me!
Thanks in advance
Sorry for my english
re: firmware issues
adc.droid said:
Dear xda users,
I have a big problem with my Samsung S7 Edge G935F!
Yesterday my phone restarts continuously so I used Odin to flash Firmware Stock. First, I used this Firmware: http://forum.xda-developers.com/s7-edge/how-to/official-stock-firmware-update-odin-t3335065 .
Odin doesn't show any errors and my phone restarts; but after Samsung S7 Edge Boot Splash Screen, the phone shows a screen with yellow triangle and Android dead and then, phone restarts in Stock Recovery Mode.
In the Recovery mode when I press Reboot System Now or PowerOff, appears "Verifying DMVerity Hash Tree..." and then "Failed" and my phone restarts again in Recovery.
I tried Wipe data and cache but Nothing!
Then I tried to repair firmware with Kies 3: No errors but my phone won't boot!!
And then I tried another firmware file with Odin but nothing!
The phone is Completely Stock! Recovery Mode and Download Mode work and the phone is recognised by PC.
Please help me!
Thanks in advance
Sorry for my english
Click to expand...
Click to collapse
Have you tried doing a "Factory Data Reset" in stock recovery yet?
If not, do that before doing anything else.
The Factory Data Reset in stock recovery will WIPE your internal
sdcard but it will not wipe your external SD if you have one.
Also it would be very helpful to know the exact filename(s) of the
stock firmware(s) which you have tried to odin flash and what the
model of your phone is. (G938F) or other variant?)
Good luck and have a great day!
Misterjunky said:
Have you tried doing a "Factory Data Reset" in stock recovery yet?
If not, do that before doing anything else.
The Factory Data Reset in stock recovery will WIPE your internal
sdcard but it will not wipe your external SD if you have one.
Also it would be very helpful to know the exact filename(s) of the
stock firmware(s) which you have tried to odin flash and what the
model of your phone is. (G938F) or other variant?)
Good luck and have a great day!
Click to expand...
Click to collapse
Thanks for your reply!
Yes I tried Wiped data/Factory Reset and Wipe cache partition in Stock Recovery..
Device: Samsung Galaxy S7 Edge
Model: SM-G935F
Firmwares tha I tried to flash with Odin:
Netherlands (Android 6.0.1) G935FXXU1APF2_G935FPHN1APE2_G935FXXU1APEQ_PHN
Italy (Android 6.0.1) G935FXXU1APF2_G935FITV1APE2_ITV
If flashing succeeds, and you still have the same problem:
go back with your device where you bought it
You can't solve it yourself, and probably something is wrong/defect with the main-board
When you 1st discovered the continuous reboot:
1. why did you not go to the store where you bought your phone?
2. why trying to flash "other firmware" on your phone instead of your "original firmware"?
What's your original CSC? Flash your phone with your original phone's CSC and bring your phone back for repair and/or replacement!
re: Odin flashing
adc.droid said:
Thanks for your reply!
Yes I tried Wiped data/Factory Reset and Wipe cache partition in Stock Recovery..
Device: Samsung Galaxy S7 Edge
Model: SM-G935F
Firmwares tha I tried to flash with Odin:
Netherlands (Android 6.0.1) G935FXXU1APF2_G935FPHN1APE2_G935FXXU1APEQ_PHN
Italy (Android 6.0.1) G935FXXU1APF2_G935FITV1APE2_ITV
Click to expand...
Click to collapse
Are you using the latest version of Odin3?
The latest version is "3.11.1" if not here
is the download link for it, give it a try:
https://www.androidfilehost.com/?fid=24572369242686812
Good luck,
Have a great day!
henklbr said:
If flashing succeeds, and you still have the same problem:
go back with your device where you bought it
You can't solve it yourself, and probably something is wrong/defect with the main-board
When you 1st discovered the continuous reboot:
1. why did you not go to the store where you bought your phone?
2. why trying to flash "other firmware" on your phone instead of your "original firmware"?
What's your original CSC? Flash your phone with your original phone's CSC and bring your phone back for repair and/or replacement!
Click to expand...
Click to collapse
In attacchments there are images of Recovery Mode.
I don't know CSC because phone won't boot to see the code.. Kies says that CSC code is PE2
I can not do anything.. right?
Misterjunky said:
Are you using the latest version of Odin3?
The latest version is "3.11.1" if not here
is the download link for it, give it a try:
https://www.androidfilehost.com/?fid=24572369242686812
Good luck,
Have a great day!
Click to expand...
Click to collapse
Yes, I did. I tried Odin v3.10.7 and v3.11.1
adc.droid said:
Yes, I did. I tried Odin v3.10.7 and v3.11.1
Click to expand...
Click to collapse
you could try samsung smartswitch for pc.If it works cool but if that does not work i suggest taking it back.
jdoggawesomex900 said:
you could try samsung smartswitch for pc.If it works cool but if that does not work i suggest taking it back.
Click to expand...
Click to collapse
I tried with Kies3 but the problem remains.. I think with Smartswitch is the same thing because the file and the installation procedure is identical.. I don't know
adc.droid said:
I tried with Kies3 but the problem remains.. I think with Smartswitch is the same thing because the file and the installation procedure is identical.. I don't know
Click to expand...
Click to collapse
But smartswitch is newer and supports most samsung devices 5.0 and up.Kies is not meant for anything higher than kitkat.
jdoggawesomex900 said:
But smartswitch is newer and supports most samsung devices 5.0 and up.Kies is not meant for anything higher than kitkat.
Click to expand...
Click to collapse
So I'll try with SmartSwitch..
Hey, i have a s7 edge that i attempted to root but bricked instead, it booted to the Verification failed, please factory reset screen. I tap Reset and it goes to TWRP. So i wiped System,data,cache,internal storage thinking it would work but i messed up the whole thing!!
I tried flashing the stock firmware via odin but it always fails on 'sboot.bin'. I don't know what to do. Please help. Smart switch doesn't detect the phone.....
edit: i have just found that sboot.bin fails because of a outdated bootloader? would downloading the latest firmware from sammobile work?? i really need the phone working as quick as i can
Duckiety said:
Hey, i have a s7 edge that i attempted to root but bricked instead, it booted to the Verification failed, please factory reset screen. I tap Reset and it goes to TWRP. So i wiped System,data,cache,internal storage thinking it would work but i messed up the whole thing!!
I tried flashing the stock firmware via odin but it always fails on 'sboot.bin'. I don't know what to do. Please help. Smart switch doesn't detect the phone.....
edit: i have just found that sboot.bin fails because of a outdated bootloader? would downloading the latest firmware from sammobile work?? i really need the phone working as quick as i can
Click to expand...
Click to collapse
Yea it could be the issue ,as u can't downgrade bootloader only update it with newer version.
Also if that doesn't help but hopefully will ,try nand erase and repit too.
Scorpionea said:
Yea it could be the issue ,as u can't downgrade bootloader only update it with newer version.
Also if that doesn't help but hopefully will ,try nand erase and repit too.
Click to expand...
Click to collapse
Yes. Updating the firmware worked, thanks!