Database Users

Android N Permanent VoLTE Fix. 10000% Working Solution.

Hello,
Just Wanted To Give A Straight Forward Solution For VoLTE Fix In Android N ROMs.
So, Here U Go.
1. Download This ROM (http://bigota.d.miui.com/6.11.3/miui_HMNote3ProGlobal_6.11.3_233ef61784_6.0.zip)
2. Download This TWRP (https://drive.google.com/open?id=0B6qi9i0uOR-BYnpaendYQ1BBRFE)
3. Download This Firmware (https://www.androidfilehost.com/?fid=385035244224398629)
4. Download This ROM (https://sourceforge.net/projects/re...onRemix-N-v5.8.0-20161126-kenzo.zip/download)
5. Download This ROM Too (https://sourceforge.net/projects/re...N-v5.8.0-20170114-kenzo-Nightly.zip/download)
1. Now, Unlock Your Bootloader, Officially Or Unofficially, I Don't Give A **** For That.
2. Flash TWRP (Step 2) Using Fastboot Or Using Existing TWRP.
3. Wipe Everything Except Ur Internal And External Storage And Flash MiUI 6.11.3 (Step 1) Using Just Flashed TWRP And After Flashing It Go To Install Again And See In Root Directory, There Will Be A Folder Named "Flash_Folder" Go Inside It And Flash Lazy Flasher. Don't Bother For Bootloader Locking, This TWRP Will Knock It Off.
4. Now Start The Device, And When On Setup Screen, See There Will Be VoLTE (That's Normal For MIUI) Be There For 5 Minutes (Complete Setup Or Not, I Don't Give A **** For That Too).
5. Now Switch Off Your Phone, Wipe System, Data, Cache, Dalvik And Flash The Firmware (Step 3).
6. Just After Flashing Firmware, Flash The ROM (Step 4), Its RR 26/11 Version Remember.
7. Start The Device, Voila You Got VoLTE.
8. Now Get Back To TWRP And Dirty Flash Latest RR (Until Now Latest RR Link Is Given On Step 5) Without Wiping Anything.
9. Flash Pico GApps 7.1 arm64 (Cmon U Know Link Of This).
10. Enjoy.
NOTE : You Can Now Wipe Everything And Flash Any Nougat ROM.
Every Resources Belong To Their Original Owner, All Credits Goes To Them.
Kill The Thanks Button If Helped, No Donation Required, I'm Bill Gates Of My Heart xD.

this is for kenzo right?

bro ur links are down

zeon321 said:
this is for kenzo right?
Click to expand...
Click to collapse
what is kenzo??

ak_bagade said:
bro ur links are down
Click to expand...
Click to collapse
Found that links have extra ) in the end.
Remove that.

cyjil said:
what is kenzo??
Click to expand...
Click to collapse
It's the 32gb Snapdragon version of Kenzo

Has this even worked for anyone now on earth? ?

Is it required to mount /cust and /system before falshing the firmware and the ROM?
---------- Post added at 05:56 PM ---------- Previous post was at 05:50 PM ----------
This method is working for sure. Thanks a ton man!

zeon321 said:
It's the 32gb Snapdragon version of Kenzo
Click to expand...
Click to collapse
16 GB snapdragon version too. Okkk

Hi OP & alls. Can i use this for Kate?

Install Resurrection Remix Project Treble!

Here's a little info if you have never used treble. ?
https://www.xda-developers.com/how-project-treble-revolutionizes-custom-roms-android-oreo/
Download Treble system-arm64-aonly
https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
This guide is for people coming from emui. If your already on treble see my guide on next thread to switch between different system images without losing data.
I got this Resurrection Remix up and running with gapps and magisk. Copy RR img, gapps and magisk to sdcard or OTG. Because this TWRP you won't be able to use internal storage. YOUR BOOTLOADER MUST BE UNLOCKED AND BE ON OREO UPDATE.
Download open gapps I use arm64 Android 8.1 micro gapps https://opengapps.org
Download Magisk 16.4
https://drive.google.com/file/d/1YftvNNZVruyYgtFE5wFsgLTDDb4Yux5W/view?usp=drivesdk
Need to have this twrp installed. Here --https://drive.google.com/file/d/1ZYo7Ndte3vlLcUSadD6jIgfBi1oxa0Pb/view?usp=drivesdk put twrp in adb folder
In adb in fastboot mode "fastboot flash recovery_ramdisk
complete_twrp_ramdisk.img"
After flash hold POWER VOLUME UP AND VOLUME DOWN IF YOU HAVE USB CONNECTED. OR JUST VOLUME UP PLUS POWER IF YOU DISCONNECT USB. TO REBOOT TO TWRP.
In TWRP select advanced wipe and wipe everything but sd card. Go to wipe again and select format data type yes. In TWRP hit reboot, reboot to recovery. Once back in recovery touch install. On bottom right select install image. Now find system-64-aonly img and select it. It will ask you where you want to install it, scroll down and select system image. Should take about a minute to install. Now reboot to system. After your in system reboot to twrp and flash gapps. After that select wipe format data. Reboot back to system and setup Google play services. Finally flash magisk for root in TWRP. ITS IMPORTANT TO INSTALL IN THIS ORDER OR YOU WILL END UP HAVING ISSUES WITH PLAY STORE AND INSTALLING APPS.
People that are getting uncertified play services error here is the APk to get your Google services device id. https://drive.google.com/file/d/1YjNZuS3RfSrQ7DnmzOZMH74I63fmHGwN/view?usp=drivesdk
Once you get your id go here and copy it in.
https://www.google.com/android/uncertified/
IT HAS EDGE GESTURES ????

I updated the installation flashing instructions on 6/2 added how to switch between different treble GSI system images. Below -------V
BUGS?
VOLTE NOT WORKING
THEME IN RR CONFIGURATION SETTINGS DOESNT WORK.
ANYONE ELSE NOTICE ANY BUGS LET ME KNOW SO I CAN ADD TO BUGS LIST.
Here's the Generic System Image List
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Thought I would make a guide for people who would like to test different treble GSI. So if you already on treble and would like to try a different one. This guides for you. Backup all your apps in titanium backup you can save them to internal storage. Copy system.img to SD card or usb to otg.
Download these gapps and copy to SD card to. https://drive.google.com/file/d/1Jz9gFWTUqKWr2y4X6FXIt5wQbR1-TrFH/view?usp=drivesdk
The reason using these gapps is because normal open gapps are to large and you will get an error in twrp saying not enough system storage available.
Boot to twrp and go to advanced wipe and wipe system data cache and dalvik. Don't wipe internal or SD card. Than flash system.img. Boot to system. Boot back to twrp and flash gapps. Go to advanced wipe and wipe data. Reboot to system. That's it, now you can test different treble gsi. Good luck.
Currently not booting GSI'S are DU and AEX.

This install process works with the other treble ROMs too for anyone interested.
Sent from my Honor 7X using XDA Labs

Has anyone successfully gone from a Treble based ROM (AOSP, LOS, RR, ECT) back to a fully working stock? These 1 off pages are great for information on flashing, but if we could create a generalized WIKI or something, that would be very helpful for everyone.

smokinjoe2122 said:
Has anyone successfully gone from a Treble based ROM (AOSP, LOS, RR, ECT) back to a fully working stock? These 1 off pages are great for information on flashing, but if we could create a generalized WIKI or something, that would be very helpful for everyone.
Click to expand...
Click to collapse
Either restore a twrp backup or flash the stock system image.
Sent from my Honor 7X using XDA Labs

Great but if you just want rr without root you can use fastboot flash
BTW I prefer the custom build here bcs it has huawei camera app built in but the ROM not update for some time

optionalmgrr.la said:
Great but if you just want rr without root you can use fastboot flash
BTW I prefer the custom build here bcs it has huawei camera app built in but the ROM not update for some time
Click to expand...
Click to collapse
Or you could just not flash magisk.
Sent from my Honor 7X using XDA Labs

allrockedout said:
I was having issues with play store now everythings working
Click to expand...
Click to collapse
What issues were you having, I can't seen to get some apps to open from playstoreb while others do.

jmoss1972 said:
What issues were you having, I can't seen to get some apps to open from playstoreb while others do.
Click to expand...
Click to collapse
You need to do flash system.img boot to system. Boot back to TWRP flash gapps. Factory data reset. And than boot to system. Pain in the ass I'm on AOSIP now. Took me forever to figure it out. After reboot apps weren't opening. Just keep trying clean install.

Thanks, I also ended up flashing AOSP vanilla and pico gapps and no issues with play store. Now if I could figure out how to make a proper back up I can use in TWRP.

jmoss1972 said:
Thanks, I also ended up flashing AOSP vanilla and pico gapps and no issues with play store. Now if I could figure out how to make a proper back up I can use in TWRP.
Click to expand...
Click to collapse
I know the p10 lite TWRP will let you backup data and system. But I've had some trouble booting into the p10 lite TWRP. Maybe need to install via fastboot I'm not sure. But I have a backup of system data kernel and boot made with p10 TWRP for stock emui that works perfect.

I want to install Resurrection Remix 7x specific build because it has Huawei camera built-in
BUt it hasn't been updated for long time @surdu_petru
https://forum.xda-developers.com/honor-7x/development/rom-t3765201
Treble build (AOSP or RR) seems more stable but they don't have Huawei camera...................
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
https://forum.xda-developers.com/pr.../huawei-stock-camera-app-treble-roms-t3735169

optionalmgrr.la said:
I want to install Resurrection Remix 7x specific build because it has Huawei camera built-in
BUt it hasn't been updated for long time @surdu_petru
https://forum.xda-developers.com/honor-7x/development/rom-t3765201
Treble build (AOSP or RR) seems more stable but they don't have Huawei camera...................
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
https://forum.xda-developers.com/pr.../huawei-stock-camera-app-treble-roms-t3735169
Click to expand...
Click to collapse
I have found a magisk module that is the hauwei stock camera. Don't remember where that was. Maybe you can find it

I don't want root though.... bu tthx!

Cannot find Edge gestures.
Cannot find edge gestures. Help please

mrmazak said:
I have found a magisk module that is the hauwei stock camera. Don't remember where that was. Maybe you can find it
Click to expand...
Click to collapse
I tried the p20 port and honor 10 camera ported but they don't work. P20 port I'm able to launch camera but the app force closes. If we could get a stock camera working that would be amazing.
Someone's just posted this haven't tested https://androidfilehost.com/?fid=746163614322262817

Adithya Krishnakumar said:
Cannot find edge gestures. Help please
Click to expand...
Click to collapse
Settings/configurations/gestures

allrockedout said:
I tried the p20 port and honor 10 camera ported but they don't work. P20 port I'm able to launch camera but the app force closes. If we could get a stock camera working that would be amazing.
Someone's just posted this haven't tested https://androidfilehost.com/?fid=746163614322262817
Click to expand...
Click to collapse
I'll give it a try
---------- Post added at 01:16 AM ---------- Previous post was at 12:43 AM ----------
Failed when I tried flashing.
---------- Post added at 01:18 AM ---------- Previous post was at 01:16 AM ----------
allrockedout said:
I know the p10 lite TWRP will let you backup data and system. But I've had some trouble booting into the p10 lite TWRP. Maybe need to install via fastboot I'm not sure. But I have a backup of system data kernel and boot made with p10 TWRP for stock emui that works perfect.
Click to expand...
Click to collapse
Did you flash the p10 lite TWRP IMG in TWRP?

jmoss1972 said:
I'll give it a try
---------- Post added at 01:16 AM ---------- Previous post was at 12:43 AM ----------
Failed when I tried flashing.
---------- Post added at 01:18 AM ---------- Previous post was at 01:16 AM ----------
Did you flash the p10 lite TWRP IMG in TWRP?
Click to expand...
Click to collapse
Yeah but magisk or something causing issues. I've gotten it through fastboot on emui in the past.

I'll try it, hopefully if it fails I can still use the TWRP I have installed.

[ROM-sGSI] [ZUI 10.0]/[ZUI 5.0] From Z5 FOR Z2 Plus [Oreo]

What is this?
- sGSI of ZUI 10.0/ 5.0 from Lenovo Z5pro/Z5, based on Android 8.1.0, June 1,2018 security patch.
Since this was requested in some comments, I flashed it and found working for our device flawlessly, with some bugs.
Features?
-All features of ZUI 4 + Soft Charge, gestures, multi space ( dual apps ) etc. Split Screen is also available.
How to flash?
ZUI 10 :
1. Download the flashable zip from the links.
2. Boot to twrp, and wipe dalvik, cache, data, system and vendor.
3. Flash the zip.
4. Reboot.
ZUI 5:
Method 1 : (Recommended)
- 1. Download any treble based 8.1.x rom and ZUI5.0-sGSI.zip (link below).
[Please use MIUI 10 8.11.1 by Narshi Shukla as base ROM, as it seems it's Vendor is most compatible.]
2. Extract the zip in your storage. You will get three files ( two flashable zips and one folder "sGSI.....". [Folder name might differ, there will be only one folder, so no worries])
3. Boot into recovery and take a backup.
4. Clean flash treble based Oreo ROM that you downloaded.
5. From your twrp, use file manager to move " sGSI...." folder to backup folder of Twrp.
6. Mount system and vendor and wipe cache/delvik, data and system.
( Don't wipe firmware and Vendor )
7. Goto restore in your twrp and restore the system from "sGSI....." folder.
8. Flash the remaining two zips.
9. Flash magisk if needed.
10. Wipe cache/delvik and reboot. Done.
Method 2 : https://forum.xda-developers.com/showpost.php?p=78389810&postcount=320
(You need treble based twrp, search if you don't already have).
After following all these steps, if your phone is stuck in Lenovo powered by android screen for long, then force reboot the phone and it will boot up to system.
What works?
-Here:
Call,SMS, VOLTE, Data, play store, Utouch, Fingerprint , Navigation, Double touch to wake, GCAM, Face Unlock, Hotspot, Banking apps, nearly everything.
What doesn't work?
- ROM specific. Bugs depend upon the treble ROM that you used as base. In some ROM, system sounds does not work. In MiUI 10, video recording might not work. Game Mode has some issues with global apps.
*FOR VIDEO RECORDING - see this : https://forum.xda-developers.com/showpost.php?p=78219358&postcount=93 ****
*Update GPU drivers for VULKAN support. Link in the links section.***
Performance?
- Better than ZUI 4, smooth as butter, no stutter playing games like PUBG, notifications on time, decent SOT.
Can it be used as daily driver?
- Yes, if you can live with some Chinese texts in certain apps.
Any other thing?
- Because the ROM is ported from Z5 which has a notch, total area of the notification bar cannot be used. To see things like real time network speed and battery "percentage" you have to pull down the notification bar.
What should I do first after booting the device?
- Install play store from App center. Install magisk to remove bloat wares. Install any music app, since there is none. This will make the system optimal for us.
Also, Turn "True Full Screen Mode" ON in display settings for full screen in Apps.
Install Magisk and download and install "SafteyPatch V2" within Magisk to pass safetynet and hide banking apps in magisk hide to use them.
Open security app and give all important permissions to the apps you use, including system apps. Also include them in autorun/whitelist section.
Links?
-Here
ZUI 10
https://drive.google.com/open?id=17lyWnAl0Kjkv5S89wdtw7HglF2072zP5
ZUI 5
Mega link :
https://mega.nz/#!FyxSiI7Y!iZmmVufR6pipX3mwv_-I3HqI714YAMJN1a2zIysinmc
Gdrive link:
https://drive.google.com/open?id=1F_Ou6x2bj26hhdffw45uo4r9qlJuaDb5
MiUi 10 8.11.1 Narshi Shukla - Full Rom
https://androidfilehost.com/?fid=11410932744536996684
MIUI 10 8.11.1 Narshi Shukla - Vendor for twrp recovery: @(THIS VENDOR isnt compatible with all roms, if facing random reboots, use the complete MIUI 10 ROM for the Gsi)
https://drive.google.com/drive/u/0/folders/15QHEUfLMagMV9jZTmlUHa4hkhkNTF-RC
Working GCAM link :
https://www.celsoazevedo.com/files/android/google-camera/f/MGC_6.1.021_FINAL_V1a_A8.1+.apk
VULKAN enabled open GL 3.2 driver link :
https://drive.google.com/folderview?id=11_atz5CDK9bHG4K_ME2LSRFFnxxKqWw2
Credits:
Not my work, I am just sharing it since I found it working.
All credits goes to this Xiaomi thread and bugrevealingbme.
https://*************/threads/zui-5-0-a-only-treble-rom.226/
******************************** FLASHING ISSUE ******************
While flashing this ROM, try to follow the guide above as strictly as possible. Use the ROM that is recommended.
If you are facing bootloop, download the vendor that is provided and restore it in twrp and then flash patch 1 and 2.
Also remember, during each and every step, your TWRP should have system and Vendor mounted. Check after every step.
Your phone might reboot once or twice during first boot, which is not an issue.
How to know if you flashed it correctly?
-If your phone boots into the system with "Lenovo bootanimation" , you flashed it correctly.
If your phone is stuck in "Lenovo - powered by android" splash image for more than 5 minutes, you got something wrong.
*********************************************************************
Screenshots attached :

what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?

I have one question. If i install a sgsi rom can i back to trenle, non-treble rom just with a simple flash method?

muujeeb said:
what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?
Click to expand...
Click to collapse
gcamera is working on redmi note 5 pro. should work also here.

muujeeb said:
what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?
Click to expand...
Click to collapse
GCAM is working.
Notification bug is not there. Only sometimes, it seems that we get late notification.
You have to flash it over Oreo because the GSI is Oreo based. Flashing over pie should work as well, since treble ROM is required. Take a backup of your system so you can restore easily, if you face any issue.

nonamesry said:
I have one question. If i install a sgsi rom can i back to trenle, non-treble rom just with a simple flash method?
Click to expand...
Click to collapse
Yes, you can get back to the ROM you want with simple flash, no problem.

Custom kernel flashable?

ashwinonm said:
Custom kernel flashable?
Click to expand...
Click to collapse
Haven't tested, but should be flashable.
Edit : Custom kernel might brick the device. Will test and update.
Donot flash custom kernel, it causes self restart of device.
Note: Moxie kernels can be flashed, you should flash patch2 after flashing kernels. But, MIUI 10 comes with moxie R5.1 so no use flashing Moxie again.

link not working

Wow it's so beautiful!

I used Arrow OS 8.1 but it got stuck in bootloop and does'nt boot at all.. I followed all the steps accordingly but it did not boot up even after i kept my phone overnight to let it boot. I don't know where i did wrong.

muujeeb said:
I used Arrow OS 8.1 but it got stuck in bootloop and does'nt boot at all.. I followed all the steps accordingly but it did not boot up even after i kept my phone overnight to let it boot. I don't know where i did wrong.
Click to expand...
Click to collapse
Use MIUI 10 port of Narshi Shukla latest build. It works.
May be Arrow OS cannot be used.
You can also try using Vendor of MIUI 10 once. Restore this vendor and the system image of ZUI.
Here is the vendor:
https://drive.google.com/drive/mobile/folders/15QHEUfLMagMV9jZTmlUHa4hkhkNTF-RC?usp=drive_open

kany1 said:
link not working
Click to expand...
Click to collapse
Link is working fine.

jebish7 said:
Link is working fine.
Click to expand...
Click to collapse
yes it is working with mega app

I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
---------- Post added at 01:19 PM ---------- Previous post was at 01:13 PM ----------
ok i try to flash it again and boot successflly

marclevine said:
I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
Click to expand...
Click to collapse
I think only MIUI 10 rom works flawlessly for this GSI. I will update the main page details and ask to use MIUI 10 only.
You couldnot flash patch 2 because it requires vendor, and may be your vendor is now messed up.
So use MIUI 10 port, it works without any issue.

marclevine said:
I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
---------- Post added at 01:19 PM ---------- Previous post was at 01:13 PM ----------
ok i try to flash it again and boot successflly
Click to expand...
Click to collapse
Glad To hear.

So in whatever rom I am in Oreo , I can use that firmware if I use vendor only from your backup? And shouldn't wipe it?

ashwinonm said:
So in whatever rom I am in Oreo , I can use that firmware if I use vendor only from your backup? And shouldn't wipe it?
Click to expand...
Click to collapse
Well, that's how some people got this working, so yes, it's working that way as well. ( Your ROM should be treble based though )
I will attach the "Vendor" file in the main post as well, so other members can use it too.

custom kernel possible,mine running in moxie

A Guide To Install Android 10 (With Fixes) on Redmi 7a

Hello,
I know that ROM developement on redmi 7a has been extreemly slow, but we all know that redmi 7a is a treble enabled device and therefore we can install every android GSI as long as it is ARM32-BINDER64-AB, yes and i wouldn't explain it here you can read it over here here.
So i thought that i should give you guys a little guide on how to install GSIs and custom ROMs and yeah with volte fix too
NOTE - I AM NOT RESPNSIBLE IF YOUR DEVICE GETS BRICKED OR THERMONUCLEAR WAR TAKES PLACE, YOUR WARRANTY IS VOID FROM THIS STEP ON, I AM NOT RESPONSIBLE IF YOUR DEVICE GETS BRICKED MAKE SURE YOU HAVE MOVED YOUR DOWNLOADED ROMS AND GAPPS TO A PC OR A SD CARD I AM NOT RESPONSIBLE FOR ANYTHING
1] The very important first step is to unlock your bootloader.
2]The second step is to patch your boot image (if you want to root it with magisk)
3] Install the custom recovery of your choice
Download the TWRP file from here
you also can install TWRP forks like
PICTHBLACK RECOVERY PROJECT or PBRP from here
SHRP RECOVERY from here (i wouldn't recommend this one if you are flashing this for the first time)
If you have your device drivers installed but you dont have adb installed then please download this file and extract it to a suitable folder where your downloaded recovery is extracted and run cmd-here and follow these steps given below
Code:
fastboot devices
this will show you if your device is connected or not.
Code:
fastboot flash recovery (your recovery name.img)
Code:
fastboot reboot
you have to keep pressing you volume increase button to reboot to recovery
4] You have to wipe DATA first then, reboot to recovery and go to mount select system (if it's unchecked)
5] Go to WIPE -> ADVANCED WIPE -> Select SYSTEM - DALVIK CACHE - CACHE - INTERNAL STORAGE
6] The list for the available GSIs or ROMs is ----
1) LineageOS thanks to ExpressLuke (GSI) (You might have to downgrade your miui to be able to boot)
2) HavocOS thanks to Skulshady (GSI) (Boots just fine with any version of miui volte patch is needed)
3) Mokee thanks to GuaiYiHu (ROM) (No worries about anything)
4) AOSP Special thanks to Phhusson (GSI) (Boots just fine without any hiccups volte patch is needed)
5) CAOS by Erenmitein (GSI) (Not tested)
6) CrDroid By Erenmitein (GSI) (tested needs the bolte fix patch. please follow the steps given below)
7] Move your GSI img (extract the .xz file) the extension is going to be .img and will not visible in TWRP or it's forks unless you select the INSTALL IMAGE option in the FLASH section and GAPPs
8] Flash your GSI as a System Image
9] Reboot to recovery again and flash your GAPPS ignore if it says no OS installed when rebooting to recovery
10] The fix for VOLTE is here thanks to Khushraj Rathod
you just have to flash it from TWRP or its forks
11] The first reboot will take some time and voila your GSI has been installed (flashed).
12] For Mokee, personaly i love Mokee rom with its boot animation, you can just flash your zip through twrp with gapps.

Thanks @Faithof_Eden for your detailed instructions. So far I always failed with the already existing manuals of other authors.
One question: What if I don't want to root the device at all, neither with Magisk nor otherwise?
You wrote: "2]The second step is to patch your boot image (if you want to root it with magisk)"
Is it then necessary to carry out step number 2 at all?

kra_ppo said:
Thanks @Faithof_Eden for your detailed instructions. So far I always failed with the already existing manuals of other authors.
One question: What if I don't want to root the device at all, neither with Magisk nor otherwise?
You wrote: "2]The second step is to patch your boot image (if you want to root it with magisk)"
Is it then necessary to carry out step number 2 at all?
Click to expand...
Click to collapse
No.

A problem has occurred during flashing:
After I flashed the AOSP image (system-quack-arm32_binder64-ab-vanilla.img) using TWRP and want to restart the recovery to install GAPPS, the Redmi 7a goes directly into fastboot-mode.
No chance to get into TWRP with the Volume-up button.
Even reflashing Recovery does not help. I've done all wiping in TWRP as indicated.

Havoc (an Mokee - but I dont like it) was finally successfull, but only by formating Data and not to wipe internal Storage....

kra_ppo said:
A problem has occurred during flashing:
After I flashed the AOSP image (system-quack-arm32_binder64-ab-vanilla.img) using TWRP and want to restart the recovery to install GAPPS, the Redmi 7a goes directly into fastboot-mode.
No chance to get into TWRP with the Volume-up button.
Even reflashing Recovery does not help. I've done all wiping in TWRP as indicated.
Click to expand...
Click to collapse
Flash vbmeta

Moke os not working speaker áudio
---------- Post added at 09:27 PM ---------- Previous post was at 09:26 PM ----------
Moke os calls not work

how to get back to stock ROM ?

idcamper said:
Moke os not working speaker áudio
---------- Post added at 09:27 PM ---------- Previous post was at 09:26 PM ----------
Moke os calls not work
Click to expand...
Click to collapse
You flashed floor miui 10.0.2.5.?

can't i do this with twrp? Tutorial ?

Flammenschwert1337 said:
Flash vbmeta
Click to expand...
Click to collapse
Did you find solution?

lslayer4231 said:
Did you find solution?
Click to expand...
Click to collapse
Start with miui 10.0.2.5.
Then go on.

My phone bootloops to redmi logo and recovery after flashing, any help from this?

After installing latest havoc 3.7 gsi the call recording feature not working though normal sound recording works... Any fix?

Hey, guys!
Havoc OS GSI is selinux permissive or enforced?
Is it possible to go back to stock rom by doing a backup using twrp?
I'm sorry if I'm being dumb, but as you already noticed, I'm newbie.

MEMO#22 said:
My phone bootloops to redmi logo and recovery after flashing, any help from this?
Click to expand...
Click to collapse
Switch back to miui 10 global version and install twrp

Has anyone else got media playout over bluetooth OK and if so, which GSI or ROM and which base firmware, please? It does not work for me with AOSP on latest EU firmware. Only calls go to BT.

[SHARED][ROM] oneOS

Used MIUI Based for Pocophone F2 Pro, Mi 9T, Mi 9T Pro
First version for Mi 8, Mi 8 Lite, Mi 8 SE, Mi 8 Pro
Before starting you will need to have the bootloader unlocked and have a custom Recovery (Keep in mind that the instructions in the previous links are generic, your device may require additional steps, check the forums of / XDA Developers in the section of your device for alternative instructions)
The OneOS team is not responsible for any lost data or damage caused to your device, all roms before being published are rigorously tested. Please read the instructions provided carefully
The steps to install are very simple, if you follow them to the letter, no problem will arise.
Download OneOS for your device
Make a backup of all your data, synchronize a copy of Xiaomi Cloud and Google, make a backup of WhatsApp, and all your photos and files in the internal memory
Reboot the device in Recovery
Go to the Wipe tab and perform a "factory format" which forces you to write "yes" on the screen
Reboot back into recovery
Transfer the previously downloaded OneOS file to internal memory
Go to the "install" tab
Select the OneOS file
Once installed, reboot (boot may take 10 to 15 minutes)
Update to new version of OneOS:
Unless otherwise indicated, it will not require any wipe
Download the OneOS update, you can do it from the updater itself, this is automatic and does not require a manual download.
If you have opted for the manual download of the update, you have two options:
From the OneOS updater select the installation package that you just downloaded
From Recovery, in this case, restart in Recovery, click on the "install" tab and select the file previously downloaded. If you did it from the computer, first you must transfer the file to the internal memory of the device. Once the installation has concluded, restart in the system and wait 10/15 minutes for it to boot.
ALL INFORMATION ON SITE: https://one.revtechs.me/en/
MOD EDIT: Telegram link removed, please read the STICKY!
I dont know why this rom is not present here but is one of the best , based on MIUI BASE..
every information can find on web site or telegram group..
I am using it for a week and it awesome,stable smooth.. try it for yourself..

Is SELinux enforced in this ROM?

does this have call recording?

mmhs said:
does this have call recording?
Click to expand...
Click to collapse
yes.
Update 201117
---------- Post added at 01:36 PM ---------- Previous post was at 01:19 PM ----------

New version from today!
This is the best ROM that I ever use.

I don't sucess to flash magisk 20.4 on this rom (magisk manager don't recognize the magisk 20.4 installation)

Can you write additional features present in this rom except of xiaomi.eu and official rom features

mekton said:
I don't sucess to flash magisk 20.4 on this rom (magisk manager don't recognize the magisk 20.4 installation)
Click to expand...
Click to collapse
Use Magisk Canary

pakom8 said:
Use Magisk Canary
Click to expand...
Click to collapse
with this version (magisk-debug.zip Update Canary Channel: Upstream to 1469b82a) on https://github.com/topjohnwu/magisk_files/tree/canary ?

mekton said:
with this version (magisk-debug.zip Update Canary Channel: Upstream to 1469b82a) on https://github.com/topjohnwu/magisk_files/tree/canary ?
Click to expand...
Click to collapse
yes that one

I'm in LOVE with this ROM.......awesome!!!

What is battery backup on this rom ?

paclaco said:
I'm in LOVE with this ROM.......awesome!!!
Click to expand...
Click to collapse
Looks like regular MIUI Eu to me.

mookiexl said:
Looks like regular MIUI Eu to me.
Click to expand...
Click to collapse
Miui EU dont have center clock, dont have options to configurate colors on status bar, and more options and one os have better batery Life.
In my opinion is better option if you have Xiaomi base.
Is diferent.....taste It and tell me after.

Does it pass safetynet?

Their latest changelog and EU MIUi latest changelog is pretty similar. ?
Edit : digged up even more to their website, and found that they also used EU MIUi as based roms as well CN Dev Rom, so yeah, it makes sense that their changelogs are about the same, This Rom looks solid overall though, planning to flash this rom later.

flor90 said:
Does it pass safetynet?
Click to expand...
Click to collapse
https://youtu.be/yMznuKMvBwg

I have oneos with magisk and safety net success, someone knows if the update requires the same procedure for safety net success, I am on the previous version and it seems wonderful

I'm really impressed with oneos. Flashing from eu stable 12.1.3.0 using TWRP. Just format data. Flashed magisk canary. I'm only playing an hour with it, but no problems with booting or disappearing TWRP (I'm using 3.4.2b). Didn't have to use fastboot. GPS was funky on the first try (low number of satellites), but looks that it's ok now. So far no problems

Can anyone comment on what dialler it uses? Google or Xiaomi?