i bricked my sgy last week
actually i installed a new kernal to overclock sgy
-i installed jellyblast rom
-installed creedsix rom
-installesd new kernal
-wipe data, cache, dalvik cache
problem
-stuck in samsung galaxy y logo
-flashed too many times, still stuck in samsung galaxy y logo
i flashed at least 30 times, with different firmwares.
but still no luck, still stuck there.
i had definitely no idea what to do.
help me. thanks.
Try Flashing the Stock Firmware with ODIN. Search for the Stock Firmware Thread in XDA. If you tried that and it didn't work, you may have to take it to the Service Centre....Here's a tutorial you could find help from--http://forum.xda-developers.com/showthread.php?t=1640668
mayank_saxena said:
i bricked my sgy last week
actually i installed a new kernal to overclock sgy
-i installed jellyblast rom
-installed creedsix rom
-installesd new kernal
-wipe data, cache, dalvik cache
problem
-stuck in samsung galaxy y logo
-flashed too many times, still stuck in samsung galaxy y logo
i flashed at least 30 times, with different firmwares.
but still no luck, still stuck there.
i had definitely no idea what to do.
help me. thanks.
Click to expand...
Click to collapse
Turn it on and leave it off for a day,then try again :good:
Status 7 stands for incorrect zip file.
Btw, i don't get it. Your title asks a question and your post says something else.
||I'm just a PM away for help||
anasdcool71 said:
Status 7 stands for incorrect zip file.
Btw, i don't get it. Your title asks a question and your post says something else.
||I'm just a PM away for help||
Click to expand...
Click to collapse
I am not able to start my phone.
Every time i switch on it .The phone gets stuck on the samasung galay y logo.
When I went in the Android System Recovery Mode (not in CWM) there were lines written in the end stating:
E:failed to mount/cache (Invalid argument)
E: Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
And when I went into the CWM tried to flash savie kernel #73 went to device information it stated as follows:
Your Device System and Partition Information
Brand : (didnt state any thing)
Model : (didnt state any thing)
Baseband : (didnt state any thing)
Build Number : (didnt state any thing)
Board Name : (didnt state any thing)
CPU : (didnt state any thing)
LCD Density : (didnt state any thing)
System Size : -1 MB
Free : -1 MB
Data SIze : -1 MB
Free: -1MB
SD Card Size : 969MB
Free : 809MB
SD-EXT Size :-1MB
Free : -1MB
and when I started the installation of this kernel it stoped and stated
" assert failed:
getprop("ro.product.device") ==
"GT-S5360" "
and also stated
Installer Status:7
.
I tried to flash the stock rom and checked the device information and now it stated as follows:
Your Device System and Partition Information
Brand : samsung
Model : GT-S5360
Baseband : S5360DDLE1
Build Number : GINGERBREAD.DDLE1
Board Name : totoro
CPU : armeabi
LCD Density : 120
System Size : -1 MB
Free : -1 MB
Data SIze : -1 MB
Free: -1MB
SD Card Size : 969MB
Free : 809MB
SD-EXT Size :-1MB
Free : -1MB
but when i started the installation of this kernel. Still the error was same.
Now please tell me what to do .
Please tell me via CWM
Help me asap.
Thanks
mayank_saxena said:
I am not able to start my phone.
Every time i switch on it .The phone gets stuck on the samasung galay y logo.
When I went in the Android System Recovery Mode (not in CWM) there were lines written in the end stating:
E:failed to mount/cache (Invalid argument)
E: Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
And when I went into the CWM tried to flash savie kernel #73 went to device information it stated as follows:
Your Device System and Partition Information
Brand : (didnt state any thing)
Model : (didnt state any thing)
Baseband : (didnt state any thing)
Build Number : (didnt state any thing)
Board Name : (didnt state any thing)
CPU : (didnt state any thing)
LCD Density : (didnt state any thing)
System Size : -1 MB
Free : -1 MB
Data SIze : -1 MB
Free: -1MB
SD Card Size : 969MB
Free : 809MB
SD-EXT Size :-1MB
Free : -1MB
and when I started the installation of this kernel it stoped and stated
" assert failed:
getprop("ro.product.device") ==
"GT-S5360" "
and also stated
Installer Status:7
.
I tried to flash the stock rom and checked the device information and now it stated as follows:
Your Device System and Partition Information
Brand : samsung
Model : GT-S5360
Baseband : S5360DDLE1
Build Number : GINGERBREAD.DDLE1
Board Name : totoro
CPU : armeabi
LCD Density : 120
System Size : -1 MB
Free : -1 MB
Data SIze : -1 MB
Free: -1MB
SD Card Size : 969MB
Free : 809MB
SD-EXT Size :-1MB
Free : -1MB
but when i started the installation of this kernel. Still the error was same.
Now please tell me what to do .
Please tell me via CWM
Help me asap.
Thanks
Click to expand...
Click to collapse
u need to flast stock rom via odin. go to this site it will surely help u http://s5360rom.blogspot.com/p/how-to-install-or-flash-stock-rom-on.html
please press thanks if i helped u.
mayank_saxena said:
I am not able to start my phone.
Every time i switch on it .The phone gets stuck on the samasung galay y logo.
When I went in the Android System Recovery Mode (not in CWM) there were lines written in the end stating:
E:failed to mount/cache (Invalid argument)
E: Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
And when I went into the CWM tried to flash savie kernel #73 went to device information it stated as follows:
Your Device System and Partition Information
Brand : (didnt state any thing)
Model : (didnt state any thing)
Baseband : (didnt state any thing)
Build Number : (didnt state any thing)
Board Name : (didnt state any thing)
CPU : (didnt state any thing)
LCD Density : (didnt state any thing)
System Size : -1 MB
Free : -1 MB
Data SIze : -1 MB
Free: -1MB
SD Card Size : 969MB
Free : 809MB
SD-EXT Size :-1MB
Free : -1MB
and when I started the installation of this kernel it stoped and stated
" assert failed:
getprop("ro.product.device") ==
"GT-S5360" "
and also stated
Installer Status:7
.
I tried to flash the stock rom and checked the device information and now it stated as follows:
Your Device System and Partition Information
Brand : samsung
Model : GT-S5360
Baseband : S5360DDLE1
Build Number : GINGERBREAD.DDLE1
Board Name : totoro
CPU : armeabi
LCD Density : 120
System Size : -1 MB
Free : -1 MB
Data SIze : -1 MB
Free: -1MB
SD Card Size : 969MB
Free : 809MB
SD-EXT Size :-1MB
Free : -1MB
but when i started the installation of this kernel. Still the error was same.
Now please tell me what to do .
Please tell me via CWM
Help me asap.
Thanks
Click to expand...
Click to collapse
U will still be able to go into download mode
Down+home+Power
Get a stock rom from http://forum.xda-developers.com/showthread.php?t=1465800
And flash using odin
From where u got creed six rom...???
Sent from my GT-S5360 using xda app-developers app
Ritayan Roy said:
Try Flashing the Stock Firmware with ODIN. Search for the Stock Firmware Thread in XDA. If you tried that and it didn't work, you may have to take it to the Service Centre....Here's a tutorial you could find help from--http://forum.xda-developers.com/showthread.php?t=1640668
Click to expand...
Click to collapse
please tell me via CWM
anmolsharma1293 said:
From where u got creed six rom...???
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Didnt remember coz i switched to jellyblast after that.
U can view my problem above
I THINK U HAVE FLASHED ANOTHER PHONE ROM ON U R YOUNG THAT'S WHY IT IS HAPPENING I SUGGEST U TO FLASH STOCK ROM FROM ODIN OR TAKE IT TO SAMSUNG CENTRE
bY
-----------------------SS------------------------OO-----------------------------MM-------------------------KK------------------------LL
mayank_saxena said:
please tell me via CWM
Click to expand...
Click to collapse
Friend, I know you'd prefer CWM as you are a New User...Believe me, I too preferred CWM sometime ago..I bricked my phone atleast three times using CWM before I succesfully installed Merruk 2.5 Deluxe using ODIN(on first attempt)..you just follow the tutorial carefully.You'll get it done for sure..READ THIS AT FIRST-- http://forum.xda-developers.com/showthread.php?t=1640668
There's the ODIN section..Go through it and you'll find it much simpler...I did. Good Luck..!
mayank_saxena said:
please tell me via CWM
Click to expand...
Click to collapse
here u go .try this at your own risk.
Procedure to install Stock ROM in Samsung Galaxy Y GT-5360
1.First download the zip file (link https://hotfile.com/dl/164864526/e7ba5c1/clockworkmod.zip.html) in your computer,extract it. After extracting you will get a folder with three files i.e. Backup, Desktop.jpg, Thumbs.db. and then with the help of USB cable connect the Galaxy Y with computer to place the three files i.e. Backup, Desktop.jpg, Thumbs.db right away in the SD card inside clockworkmod folder. Do not place in any subfolder.
2.Detach the cable
3.Just check that in the backup files there is a folder DDLE1 and in that there is Nandroid.rsf.tar, System.rfs.tar, Cache.rfs.tar etc. if these are missing then again continue the process from beginning.
4.Now its time to turn off the Y to boot into Clockworkmod recovery by pressing the Volume Up key, Home and then power button together. In case you have install the creed ROM then press the power button and select the Clockwork Mod to boot the same.
5.Now wipe data and cache partition. After this select Backup & restore-> Restore-> DDLE1->Confirm-restore DDLE1 and wait for 10 minutes to flash the ROM.
6.When the installation is finished, select ‘Reboot system now’.
If this doesn’t work then you have use odin way.
PLZ PRESS THANKS
I hate to see the people getting their basics wrong and doing it all complicated.
1) First of all, DONT use Creed six ROM, its NOT an official one(not by creed series OP pratyush.creed), its outdated, way better ROMs out there now. Try USSRv8/ Jelly Blast/ Hyperion, they are way better than Creeds Six in every way.
2) Use only XDA posts/ROMs/Kernels to get the correct info, dont rely on 3rd party websites. If you cant find something in xda, you cant find anywhere!
3) Im assuming you are installing Merruk Kernel 2.5 (deluxe #206 kernel) which only supports overclock.
The error code you are getting there is due to the ext4 flashing. Merruk #206 involves the conversion of system,data and cache to ext4 and flashing the kernel in ext4, its a ALL-IN-ONE pack.
To get a perfect combo of flashing merruk dev #206 follow these steps:
1) Flash back to stock ROM (Refer to doky73 thread in development)
2) Flash any custom ROM you desire via CWM( Refer its thread for instructions)
3) Download and copy the latest merruk kernel package(#206 deluxe all-in-one pack) to SD card
4) Backup your ROM using nandroid backup option from CWM
5) Flash the merruk kernel zip via CWM
6) Now, Go to advanced restore in CWM and restore data,system, cache
7) Reboot..
Thats it, your phone is now installed with latest merruk kernel(which involves the overclocking capability).
its mean here is not any solution
its mean here is not any solution of real [Q] how to fix error status 7 in samsung galaxy y
we all know about odin packages on XDA...
i think here is cygwin software issue....... its not for all
or
is this solution?
extract the boot.img and flash it via fastboot. Then perform a Full Wipe and try to flash the ROM again....
An unlocked bootloader is recommend for flashing custom Roms and kernels.
i think its solution..
There is a prob in ur updater script
Sent from my GT-S5360 using XDA
Kashif.Ali said:
its mean here is not any solution of real [Q] how to fix error status 7 in samsung galaxy y
we all know about odin packages on XDA...
i think here is cygwin software issue....... its not for all
or
is this solution?
extract the boot.img and flash it via fastboot. Then perform a Full Wipe and try to flash the ROM again....
An unlocked bootloader is recommend for flashing custom Roms and kernels.
i think its solution..
Click to expand...
Click to collapse
hell_lock said:
There is a prob in ur updater script
Sent from my GT-S5360 using XDA
Click to expand...
Click to collapse
Error 7 means error in updater script. But his query isnt that. The topic heading and the question he asked is completely different.
hitme987 said:
Error 7 means error in updater script. But his query isnt that. The topic heading and the question he asked is completely different.
Click to expand...
Click to collapse
cygwin automatic generating updater script u mean its issue of cygwin...
because u r saying right "its updater script error"
E:Can't mount cache/recovery.....
pustinjak said:
Turn it on and leave it off for a day,then try again :good:
Click to expand...
Click to collapse
Hi, i istalled JellyBlastV3 on Samsung Galaxy Y and it worked perfectly fine..but then I try to install a New Kernel smthng Marvk v2.0, i dnt remember exactly..and i did smthng wrong..it got stuck in bootloops.But Then i Flash Stock ROM with Odin..and it worked pretty good.But Now i am again try to install JellyBlast V3 ..abd When IN CWm when i try to wipe data/reset & Wipe Cache Partition..I Get
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
thsese errors..Nw i dnt know what is the problem ..when i try to wipe in Android Recovery ..it just worked fine...
Please help
Yudi
[email protected]
yudibakshi said:
Hi, i istalled JellyBlastV3 on Samsung Galaxy Y and it worked perfectly fine..but then I try to install a New Kernel smthng Marvk v2.0, i dnt remember exactly..and i did smthng wrong..it got stuck in bootloops.But Then i Flash Stock ROM with Odin..and it worked pretty good.But Now i am again try to install JellyBlast V3 ..abd When IN CWm when i try to wipe data/reset & Wipe Cache Partition..I Get
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
thsese errors..Nw i dnt know what is the problem ..when i try to wipe in Android Recovery ..it just worked fine...
Please help
Yudi
[email protected]
Click to expand...
Click to collapse
Flash ur stock rom by odin or take it to servic centr if ur phone is in waranty...
Press thnx if u got ur phone working back
my phone sometimes hang but its kinda weird bcs if happening when im wathing video the video is still running for about 1 min but back button, home button and all things are not working.
and im trying to downloading logcat and show error like this:
ABS y overstep the boundary !!!
Device driver report y =1900, but max is 1745
(i've found this so much! and idk what to do)
https://image.ibb.co/krQ6f7/Screenshot_2018_03_12_17_00_51_95.png
protecteyesinit, try to dlopen arm32 so:/system/lib/libprotecteyes.so
protecteyesinit, dlopen arm32 so, dlhandle null: open ***fail****,now dlerror info:: dlopen failed: "system/lib/libprotecteyes.so" is 32-bit instead of 64-bit
protecteyesinit, try to open 64so, now dlerror info : (null)
protecteyesinit, dlopen arm64 so:/system/lib64/libprotecteyes.so, open ***success****, now dlerror info : (null)
Detect_Icon_Margin Bottom failed ! PixelIndex = 9264, templineSize = 9215
any solution without reflashing os? when its happen, i should restart 3-4 times for get everything back to normal.
pls help
I am having Huawei Honor 3C H30-U10, It was running fine but some days back when I plugged in charger it restarted and hung up on welcome screen (no animated logo). Seems like I need to install Stock Rom to it.
Phone Details:
Huawei Honor 3C H30-U10
Build Number: H30-U10 V100R001C900B108
International Variant
I download Stock ROM for it with version B108 but it was in SP Flash Tool format. My phone isn't recognised by my laptop even though I have VCOM drivers installed.
This force me to think I need to download Stock ROM but which is in dload and UPDATE.APP form. It was hard for me to get any ROM H30-U10 V100R001C900B108 in UPDATE.APP form. Fortunately I got one from
forum.lowyat . net/topic/3237141/+1260
(Please look at: 7. V100R001C900B108 ROM (update.app))
Upon pressing Volume UP+Power Key It successfully went to updating from SD Card but I am receiving this error log on screen:
Code:
md5_verify success
dloading module CURVER.....
main version string=H30-U10 V100R001C900B108
dloading module VERLIST.....
Main version from property is H30-U10 V100R001C900B108
main version check: the market is same. go to continue..
current version in VERLIST, allow to update.
dloading module MBR.....
dload:update partition MBR failed
Update /sdcard/dload/update.app failed
=============================
@@@@@ @ @@@ @
@ @ @ @ @
@@@ @ @ @ @
@ @@@@@ @ @
@ @ @ @@@ @@@@@
=============================
My question is
Why I am getting this error?
What are the other possibilities that I can do to bring back this phone to life?
PS:
Pointing to this dload:update partition MBR failed Shopkeeper (Mobile technician) told me your phone internal memory is full or corrupted. You can't get it right until you change the hardware part associated with memory. Is he right?
Guys, I tried hard to search this question on internet and I didn't find anything. Please provide rich information so that other community use it for reference.
Hi,
1. I try to patch kernel for nethunter "porting nethunter" google. Watching yt video "compile nethunter kernel". At the point ~min6-8 he chooses config to change and got only one in configfolder. I have many, which one is the right?
2. I get error compiling kernel adressed to scripts/gcc-version.sh "oserror: invalid number, exec: invalid number..etcetc: invalid number..
3. Is it possible to do 64 kernel on 32 bit machine?
When compiling kernel modules, an error (Makefile:152: sub-make] Error 2)
How to solve this problem, please tell me?)
I have this problem, too, when I try to make sub-make and I get an error,core dumped