Related
You know the four LEDs that light up along with the keyboard LEDs at the bottom of our phone? It pisses me off that Samsung wired these guys in with the keyboard and literally made it impossible to disable them using software fixes. And I've set it to 3 seconds but that just doesn't cut it. I want them disabled, permanently, until I decide they should be turned back on. Well, I took it to the next level.
Cutting a piece of black electrical tape to just fit over the four, bottom buttons, I place it over the LEDs and BOOM, they were gone. My eyes will no longer tear up when I'm on my phone late at night while laying in bed. No longer will the screen be set to a healthy, dim brightness only to be overpowered the four LEDs at the bottom each time my finger touches the screen.
The capacitive feature still works fine, and I've lost no functionality with this fix. I'd post a picture but I'm having some issues with my digital camera.
I dont know if this is an issue with other handsets.
I installed proximity screen off application . The purpose was to have the phone turn the screen off when i close my flip case.
However i found something strange.
When the flip case is very close to the screen the proximity sensor does not seem to detect that there is something covering it.
Is this an issue with every one ?
Any solution
Please see the videos
As you can see from the videos when i bring the shield very close the proximity sensor does not seem to detect the sheild.
Edit : However if u use ur finger this is not seen
I've noticed the same behavior, it's quite annoying because it kills one of NoLed's best features (screen off using prox. sensor).
[deleted]
Still really annoying that the original flip cover won't work with the proximity sensor. A workaround might be a third party flip case. A diy modification of to the original one won't work since if I close it AND hold whatever object that alone is enough for a positive result over the flip cover, the sensor will still not register positive [because a minimal distance between an object and the glass surface is required, see below].
mine works even with a finger...
I've done it a few times accidently when i was trying to access the notification bar while on the phone
ph00ny said:
mine works even with a finger...
I've done it a few times accidently when i was trying to access the notification bar while on the phone
Click to expand...
Click to collapse
Thats the thing i was saying.
With finger i works great even if u touching the screen
Dial *#0*# and press sensor. If it vibrates, the proximity sensor is registering an object.
Maybe it comes in handy with testing.
It's working for me, thanks for the tip about the app!
edit:
Okay, I tested and found that indeed when you set the app to:
"Cover an hold to lock the screen" to say 5 seconds.
Close the flipcover.
It does not register.
However. If I set:
"Disable Accidental Lock" to .25 seconds.
Close the flipcover.
It works quite well.
Coming back to the sensor. It indeed does not register the flipcover when it's closed and touching the screen.
Weird thing is it does not register your hand anymore either.
Recreating issue:
Remove flipcover and lay it completely flat over the sensor.
Dial *#0*#.
Press "Sensor".
No registration.
Now hover your hand over where the proximity sensor is, and... How about that, no registration.
This indeed messes up NoLed's battery saving feature.
This can also be a problem when:
You set screen timeout to 10 min.
In the app's settings set "Disable in landscape" to on.
Then use an app in landscape mode.
Close flipcover while in landscape mode.
Then rotate to portrait. At this point it should start registering again and turn off screen..
The sensor does not register and screen stays on.
Drains battery.
It is a really cool idea, but it does not function properly.
It's too flaky, also when just handling your phone. I find myself accidentally turning off the screen.
Maybe if you use a case or some other cover with a different or thicker material it would work better.
I ordered a Zenuscase, I'll give it a try with that one.
Don't know how long it'll take to arrive though
reflective color
heey i found the problem , the sensor is working fine ... but when so close with any black object the light is not reflected back to the proximity sensor.(black color absorbs light).
Repeat your video with any white object and you will notice the difference..
Now i am using Autostart and it works great with samsung original flip cover (white flipcover).
you can use any white sticker on the black one.
ahmedtaha7 said:
heey i found the problem , the sensor is working fine ... but when so close with any black object the light is not reflected back to the proximity sensor.(black color absorbs light).
Repeat your video with any white object and you will notice the difference..
Now i am using Autostart and it works great with samsung original flip cover (white flipcover).
you can use any white sticker on the black one.
Click to expand...
Click to collapse
ya correct, just few day back i have asked this issue to developer
http://forum.xda-developers.com/showpost.php?p=22170417&postcount=5
But it will work perfact if you use proximity + light both sensor enabled.
Color has no influence, distance between an object and the proximity sensor is what matters. I've just tested this using pieces of paper, cloth, metal and wood in white and black colors. The sensor seems unable to correctly register anything that is less than approximately 1 mm away from the glass (it may report 0 cm or jump to 5 cm). Also it seems it only reports changes of a certain minimal distance between two readings, even if the reported value remains the same as the old one. Anything below the threshold of the 5 cm reading will always result in a reported value of 0 cm, but if the effective distance between reading A and reading B was below a certain threshold, the sensor will not report a new reading of 0 cm (thus an object hovering stable over the sensor will not produce a 2nd post). I'm not sure if the sensor has a state that can be read at any time. From my tests using AutomateIt Pro, it seems only new posts can be used by apps. And if the delta between two readings is to small to make the sensor post a "new" result, then this can be problematic under certain circumstances (like trying to turn the screen off after the flip cover got closed (prox. sensor = 0 for 0 sec) and stays closed (light sensor = 10 for 5 sec) while preventing the screen from going off after an accidental wipe over the prox. sensor e.g. with the hand).
@Dr. Ketan: I've tested Power Switch (again) and I'm quite certain that for the Note + Flip Cover it only works through the light sensor (which is unsatisfying since it then won't work correctly in the dark). Covering the proximity sensor only doesn't make the app reliably react.
Power switch works ok for me with the Samsung flip cover. I have the confirmation set to minimum Abe theactivation delay set to 0 seconds.
It doesn't always work from the lock screen but works fine from the home screen or apps
Sent from my GT-N7000 using xda premium
so is it a hardware issue of software?
might it be fixes in ICS? it's fu***ng annoying! just bought the flip cover(black) yesterday and also bought smart cover app, my note's screen keeps on turn off (when flip closed) then it turns back on (flip still closed)!
Any solution for gingerbread? like proximity calibrator perhaps? (while waiting for final version of ics to come out)
Power switch will work if you use proximity + light sensor both.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Power switch will work if you use proximity + light sensor both.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
It's so sensitive that the moment my finger move over the sensor, the shutdown menu pops up.
Any app that works with the flip cover?
Hey guys, this is extremely bothering. I have an xqisit folio case that also doubles as a stand. Anyways, when I open the case, the screen lights up, and if I open it just ever so slightly, I notice there's this view mode that displays time and battery, the information that shows through the s view cover.
Anyways, I don't own a s view cover nor do I want one. I also don't want the screen to light up when I open the case because that means the screen's not completely off/phone's not completely resting and uses up more battery.
How the hell can I disable this? I've googled and found nothing and also gone through the settings but found nothing there as well.
Theshawty said:
Hey guys, this is extremely bothering. I have an xqisit folio case that also doubles as a stand. Anyways, when I open the case, the screen lights up, and if I open it just ever so slightly, I notice there's this view mode that displays time and battery, the information that shows through the s view cover.
Anyways, I don't own a s view cover nor do I want one. I also don't want the screen to light up when I open the case because that means the screen's not completely off/phone's not completely resting and uses up more battery.
How the hell can I disable this? I've googled and found nothing and also gone through the settings but found nothing there as well.
Click to expand...
Click to collapse
well i suppose your folio case uses also the magnetic sensor used by the s-view cover to turn the screen on and off.
as this switch was primary implemented for the s-view cover its the default behaviour to show the s-view screen when you close your cover.
afaik there is no mod to change it right now but i hope this "s-view mode" will be customizable in future with the help of our fantastic community devs! :fingers-crossed:
anyway dont worry about the battery consumption too much as the s-view screen is only displayed for about 5 seconds and then the screen turns completely off.
clonednull said:
well i suppose your folio case uses also the magnetic sensor used by the s-view cover to turn the screen on and off.
as this switch was primary implemented for the s-view cover its the default behaviour to show the s-view screen when you close your cover.
afaik there is no mod to change it right now but i hope this "s-view mode" will be customizable in future with the help of our fantastic community devs! :fingers-crossed:
anyway dont worry about the battery consumption too much as the s-view screen is only displayed for about 5 seconds and then the screen turns completely off.
Click to expand...
Click to collapse
Thanks a lot! Out of thanks for the moment so can't thank you.
I have S view cover.
When the screen is unlocked and you close the cover, it will show the time. If u open it a little, it will still show time. But if you open it till roughly more than 30 degrees, it will either show the lockscreen(for those with passcode/pin etc.) or homescreen(for those with no lock).
When screen is off and you close the cover, it will not show anything. Open the cover alittle, maybe around 20degrees, it will still not show anything.
Hello, been visiting the boards for a long time, but I didn't register because I had nothing to contribute really. <.<
I currently have a i9505 running on cm13 6.0.1.
Last night when I wanted to reply to a text I used the right side lock screen shortcut that's set to messaging the circular motion thingy messed up the edge of my screen. (I didn't realize until later that it's not actually a hardware issue if you ask me.)
Some pictures, screenshots don't register anything:
CAN'T POST IMAGES because I'm a new user. :/
It's on imgur, with /a/Murqy extension after .com. Album of three images.
Messaging shortcut thingy on the second screen is a lock-screen burn in, as is lock screen in the middle of the first screen.
Sorry for the garbage quality screens, I don't have any other spare phone except for the ancient Sony Ericsson with me atm.
At first this obviously looks like some display issue or a burn-in. I've checked the display, it has absolutely no scratches.
I've also read about the quality issues of some S4 phones and glass+display being glued together which can lead to yellowish tint. And how display breaks easily because of bad build quality and too much pressure being put on the display itself.
Anyhow, ever since that brown/yellow thing appeared the right/left lock screen shortcut animations stopped showing. And that thing is the exact size of the lock screen shortcut animation.
Also, those three burned in lock screen buttons, phone/unlock/messaging aren't really burn ins. When I try to press any of them in the bugged state when the screen is already unlocked, the dropdown menu activates. Also when I use dropdown menu myself, those 3 buttons are instantly gone without leaving a trace. And when the dropdown menu is activated, the yellowish corner translates from the background to the menu itself. Icons on the home screen in the background aren't yellow anymore, but icons in the dropdown menu are.
So, I'm completely at loss what to do here. I don't wanna use one of those burn in removal apps to mess my phone up, I don't have a warranty because I got it used like less than a month ago and everything was working fine. And I don't wanna take it to a repair shop because they'll just tell me the display is messed up.
There's just too much coincidence here for me to believe it's a classic case of display burn in.
Why wouldn't lock screen shortcut animations show up anymore if that was the case? Even on the left side which is completely fine. And it just appeared out of nowhere when I used one of those shortcuts. As if animation is stuck in there.
Sorry for the wall of text, but wanted to explain it in detail as I couldn't find anything similar anywhere else. <.<
Perke- said:
Hello, been visiting the boards for a long time, but I didn't register because I had nothing to contribute really. <.<
I currently have a i9505 running on cm13 6.0.1.
Last night when I wanted to reply to a text I used the right side lock screen shortcut that's set to messaging the circular motion thingy messed up the edge of my screen. (I didn't realize until later that it's not actually a hardware issue if you ask me.)
Some pictures, screenshots don't register anything:
CAN'T POST IMAGES because I'm a new user. :/
It's on imgur, with /a/Murqy extension after .com. Album of three images.
Messaging shortcut thingy on the second screen is a lock-screen burn in, as is lock screen in the middle of the first screen.
Sorry for the garbage quality screens, I don't have any other spare phone except for the ancient Sony Ericsson with me atm.
At first this obviously looks like some display issue or a burn-in. I've checked the display, it has absolutely no scratches.
I've also read about the quality issues of some S4 phones and glass+display being glued together which can lead to yellowish tint. And how display breaks easily because of bad build quality and too much pressure being put on the display itself.
Anyhow, ever since that brown/yellow thing appeared the right/left lock screen shortcut animations stopped showing. And that thing is the exact size of the lock screen shortcut animation.
Also, those three burned in lock screen buttons, phone/unlock/messaging aren't really burn ins. When I try to press any of them in the bugged state when the screen is already unlocked, the dropdown menu activates. Also when I use dropdown menu myself, those 3 buttons are instantly gone without leaving a trace. And when the dropdown menu is activated, the yellowish corner translates from the background to the menu itself. Icons on the home screen in the background aren't yellow anymore, but icons in the dropdown menu are.
So, I'm completely at loss what to do here. I don't wanna use one of those burn in removal apps to mess my phone up, I don't have a warranty because I got it used like less than a month ago and everything was working fine. And I don't wanna take it to a repair shop because they'll just tell me the display is messed up.
There's just too much coincidence here for me to believe it's a classic case of display burn in.
Why wouldn't lock screen shortcut animations show up anymore if that was the case? Even on the left side which is completely fine. And it just appeared out of nowhere when I used one of those shortcuts. As if animation is stuck in there.
Sorry for the wall of text, but wanted to explain it in detail as I couldn't find anything similar anywhere else. <.<
Click to expand...
Click to collapse
I'm not familiar with burn-ins, but since it's a used phone the probability of the screen being messed up is high.
If it really is a software glitch, the only option would be to flash a different rom. If it continues, flash a stock rom via Odin. If the problem still persists, then it's most probably a hardware issue.
Remember, the flashes have to be clean flashes. As clean as possible. Dirty flashes won't help, especially when trying to find the root of a problem.
I've had it for nearly a month now and I didn't have a single issue.
As I've said, it's probably not a burn in because it just appeared like that due to one animation.
And since it's also there when I boot into recovery I don't think flashing a new ROM would help.
..
MuF123 said:
http://i.imgur.com/j4t9fEA.jpg
Is this gradient (around the icon) visible to naked eye? This is really nasty Just a guesswork: this could be one of failure modes for amoled. I have 8 weird rectangles burned in over the whole screen and really don't know where they came from.
Check this: http://forum.xda-developers.com/showthread.php?t=2603039 evidently even light from outside can burn in your screen.
Click to expand...
Click to collapse
Yea, it's visible.
That's the far right shortcut on the dock.
But the weird thing is that it just disappears if I try to click it.
Same goes for the lock screen shortcuts as I've said already, that's why I'm not sure it's a regular case of screen burn.
And when I pull down the dropdown menu, the color of the desktop goes back to normal, but dropdown menu icons in the bottom right turn yellowish, as if the tint translated to the screen that's being used at that moment.
After I realized that I tried to mess around with color saturation and brightness.
Changing brightness had no effect, lowering it would just make that corner darker, but as I dropped down color saturation on all of the RGB components more and more it became less and less noticable.
But the buggy lock screen shortcuts still puzzle me. They remain on the desktop after I unlock the phone, but are instantly gone as soon as I click them.
If it wasn't for that, I'd be pretty sure the screen broke because of bad build quality. I read about the display having too much pressure put on it, somewhat of a design flaw.
Gonna try that burn in app, what's the worst thing that could happen to a broken display. <.<
..
MuF123 said:
Does it disappear if you press and hold without actually doing something? Make a screenshot and display the image fullscreen as if it was lockscreen, will it happen again? While showing the screenshot, press and hold on the icon, any change?
Does all of the gradient disappear or just the icon burn in?
Click to expand...
Click to collapse
If I hold it, it actually works (eg taking me to messages or phone menu as if the screen was locked). It doesn't appear on screenshot, only after I unlock the phone. That's what's puzzling me, it's not actually burned in, it looks like an issue with the display when I change screens (from locked to unlocked or switching from desktop to broswer like in that screenshot with the burned in icon, as soon as I click it it also disappears, same as shortcuts).
And gradient gradually disappears as I lower the color saturation. Disappears fully at around 30% for all RGB components. But brightness is way too low then.
..
MuF123 said:
I know, I just wanted you to make your phone display the same content as if it was locked - but now the image would be screenshot and not the actual lockscreen... I know this sounds really wild, but I don't see any better troubleshooting ideas here
Click to expand...
Click to collapse
I get your point, like I'm leaning towards display issue but not a classic one but a weird one because it has issues with switching screens.
Idk, I'm gonna roll with this for a couple more days, if it gets worse it's definitely the display.
..
MuF123 said:
Just out curiosity - maybe you could make a video how this behaves
Click to expand...
Click to collapse
Maybe tomorrow if I find a half-decent camera.
Actually, I made a screencast.
https://media.giphy.com/media/3oGRFj88fgqgT3vWrS/giphy.gif
As you can see, after I unlock the screen, all three shortcuts are burned in.
When I press the burned in unlock icon it just briefly opens the dropdown menu (it wasn't me opening it at that point, when I clicked the lock screen icon in the middle)
Yellow tint in the bottom can't be seen on the video.
Hello all!
My Razer Phone 2 stopped charging. This is how my Razer Phone 1 also died, basically the charging port went bad, then worse, then died completely.
Anyway I got the Nothing instead, since price and specs fit me pretty fine.
However I want to change a few things. I might be blind in the settings menu, but I'm hoping you'll still help me!
I got a few points I'd like changed, and no amount of googling helped me here:
1. The phone turns on the screen when I pick it up. But there are often mistakes, and the screen just turns on by itself when I'm walking with it in my hand, or in my pocket. It has happened already a few times, after having for phone for 48 hours, that I have dismissed some notifications because of this. Can I stop this function all together?
2. I can also press the screen once and the screen will turn on. This is also a problem when the phone is in my pocket. On my Razer I had to double tap and it still turned on sometimes in my pocket. I ran the Razer phone with Nova Launcher, maybe I have to change to this launcher from the Nothing one to get this double tap feature?
3. I can turn off the screen by double tapping on the home screen. That is a feature I always use and appreciate. I never put the phone screen down so the lights on the backside won't get used. I always double tap to turn on the screen, check for notifications, and double tap to turn the screen off should there be no notifications. Nothing phone won't turn off the screen with a double tap unless I actually unlock it, so I can't do a quick check for notifications by double tapping and double tapping again. It won't matter if the phone is on a table, but I frequently check notifications and put the phone back to my pocket, and having to go for the screen button is not exactly for me. Do I need Nova Launcher here?
4. I NEVER use sounds on my phone, except for the alarms. When someone calls me while the screen is turned off, the screen turns off and I get vibration. If the screen is on I won't get any vibration from it, only a visual notification which is easy to overlook if I let it sit with the screen on but locked if I just checked notifications. Also I like the feedback in my hands in case I am doing something on the phone. I already missed some calls because of this. Can it be changed?
5. Is it possible to manipulate the glyph on the backside? I found a "secret" setting which makes them light up to the music playing, but that became pretty annoying just after 5 seconds. Are there some basic things you can do with the light? Like making a custom event and then specify how the light should react? Could be something simple like when a call is active the lights come on very dim? Maybe a 3rd party app someone did?
6. The Razer Phone 2 (and 1) has HUGE speakers in the top and bottom, so I have been living with pretty big bezels. The Nothing has the same size but the phone is almost 100% screen. If I need to go to the bottom and press a back button or something, I cannot reach anymore like on the Razer. Is there a way to add some virtual bezels on Android?
7. I really hate this "notch" or "camera bump". It is a bit of the same as number 6, but can I remove it completely, so the top of the screen where the camera is won't be used at all? The whole line, effectively adding more bezel here too.
I am probably picky, but I have used my phone in a specific way for my whole life, and I am not really good with changes. Also I think a phone should adapt to my needs, and I shouldn't adapt to it.
Thanks for reading and hopefully helping
To be honest, sounds like the Nothing Phone isn't the right device for you.
I like to know the answer to question 1 too.
Jelle99 said:
Hello all!
My Razer Phone 2 stopped charging. This is how my Razer Phone 1 also died, basically the charging port went bad, then worse, then died completely.
Anyway I got the Nothing instead, since price and specs fit me pretty fine.
However I want to change a few things. I might be blind in the settings menu, but I'm hoping you'll still help me!
I got a few points I'd like changed, and no amount of googling helped me here:
1. The phone turns on the screen when I pick it up. But there are often mistakes, and the screen just turns on by itself when I'm walking with it in my hand, or in my pocket. It has happened already a few times, after having for phone for 48 hours, that I have dismissed some notifications because of this. Can I stop this function all together?
2. I can also press the screen once and the screen will turn on. This is also a problem when the phone is in my pocket. On my Razer I had to double tap and it still turned on sometimes in my pocket. I ran the Razer phone with Nova Launcher, maybe I have to change to this launcher from the Nothing one to get this double tap feature?
3. I can turn off the screen by double tapping on the home screen. That is a feature I always use and appreciate. I never put the phone screen down so the lights on the backside won't get used. I always double tap to turn on the screen, check for notifications, and double tap to turn the screen off should there be no notifications. Nothing phone won't turn off the screen with a double tap unless I actually unlock it, so I can't do a quick check for notifications by double tapping and double tapping again. It won't matter if the phone is on a table, but I frequently check notifications and put the phone back to my pocket, and having to go for the screen button is not exactly for me. Do I need Nova Launcher here?
4. I NEVER use sounds on my phone, except for the alarms. When someone calls me while the screen is turned off, the screen turns off and I get vibration. If the screen is on I won't get any vibration from it, only a visual notification which is easy to overlook if I let it sit with the screen on but locked if I just checked notifications. Also I like the feedback in my hands in case I am doing something on the phone. I already missed some calls because of this. Can it be changed?
5. Is it possible to manipulate the glyph on the backside? I found a "secret" setting which makes them light up to the music playing, but that became pretty annoying just after 5 seconds. Are there some basic things you can do with the light? Like making a custom event and then specify how the light should react? Could be something simple like when a call is active the lights come on very dim? Maybe a 3rd party app someone did?
6. The Razer Phone 2 (and 1) has HUGE speakers in the top and bottom, so I have been living with pretty big bezels. The Nothing has the same size but the phone is almost 100% screen. If I need to go to the bottom and press a back button or something, I cannot reach anymore like on the Razer. Is there a way to add some virtual bezels on Android?
7. I really hate this "notch" or "camera bump". It is a bit of the same as number 6, but can I remove it completely, so the top of the screen where the camera is won't be used at all? The whole line, effectively adding more bezel here too.
I am probably picky, but I have used my phone in a specific way for my whole life, and I am not really good with changes. Also I think a phone should adapt to my needs, and I shouldn't adapt to it.
Thanks for reading and hopefully helping
Click to expand...
Click to collapse
1. There is an option to turn this feature off under Display->Lock Screen called Lift to show lock screen.
2. Don't know, but you should try using the Nova Launcher.
3. Don't know, but you should try using the Nova Launcher.
4. Very niche use case, you can try to search some root methods.
5. There is root app which can control the light you can try that.
6. and 7. There should be some root apps or magisk modules which allows to do that.
To 2: (I dont know if this works on NothingOS since im on Paranoid Android. But both are very near to stock, maybe it works for you or for others.) I disabled that tap to activate setting and am using fingerprint while screen is off. This can also act as a quick look for notifications, for that i tap where the fingerprint reader is really short so it fails to unlock. This way only the always on display shows up for 3-4 seconds.
Nova wont change anything lockscreen related.
To 5: If you have root, time and like playing around with commands and apps, you can try tasker. Since im on Paranoid Android and the glyphs arent really implemented yet, i made a task that fits my needs perfect.
To your other problems: i think too, the phone should adapt to the user. So i suggest you to wait, i guess there will come roms that are way more customizable.
And maybe a pixel would fit your needings better than this phone because there is a big custom rom scene around.