Related
Hai all , I am new here.
I need some help to unbrick my device. i tried almost all method and still no luck. the only method i havent tried is DFC, but i dont prefer to do it since its pretty complicated.
My device run rom Global Stable Miui 7 and i flashed Developer rom Global using EDL download mode.
there was an error and now my device stuck in Mi logo. I can still access Mi bunny fastboot ( vol down + power)
So far I have tried 3 methods
Method 1: reboot to fastboot mode, plug to pc, open ADB cmd prompt and type fastboot oem EDL. But no success because device is still locked bootloader.
Method 2: reboot to fastboot mode, plug in to pc, download fastboot EDL cmd from xda forum, unzip then run edll.cmd, device reboot to mi logo again.
Method 3: in Mi logo, plug in to pc, open cmd prompt, type Adb reboot edl, press enter but device cannot reboot to edl mode because it says I need to tap on confirmation dialog on device. But its not possible since device only load up to mi logo
Download the latest stable fastboot ROM from here http://en.miui.com/a-234.html then flash it.
Sent from my Redmi 3S using Tapatalk
If only it was that easy. I've tried 3 methods above but still no luck. Use Adb reboot edl, fastboot oem.
How to flash if its only stuck at mi logo
Because I had this exact same thing happened before. What I did was while it kept bootlooping at the Mi boot splash I held down Vol - + power until fastboot mode pops up. Then you'd be able to flash.
Sent from my Redmi 3S using Tapatalk
Trovies said:
If only it was that easy. I've tried 3 methods above but still no luck. Use Adb reboot edl, fastboot oem.
How to flash if its only stuck at mi logo
Click to expand...
Click to collapse
First off you cannot just unlock the bootloader easily, like in fastboot or anyhow, you need to follow the guides. And this is possible by the way only with a working Dev rom.
Well so now, you've to get miflash tool and flash either stock rom, or dev rom.
You simply hold power and volume down as long (can take some time) as it will show "fastboot" and some android art.
Then you follow the guides to flash either stock rom or dev rom using fastboot, and you're good to go.
I don't see why this wouldn't be working for you, try to stick exactly to what i said. If you don't know how to use Miflash then search at en.miui.com
Trovies said:
Hai all , I am new here.
I need some help to unbrick my device. i tried almost all method and still no luck. the only method i havent tried is DFC, but i dont prefer to do it since its pretty complicated.
My device run rom Global Stable Miui 7 and i flashed Developer rom Global using EDL download mode.
there was an error and now my device stuck in Mi logo. I can still access Mi bunny fastboot ( vol down + power)
So far I have tried 3 methods
Method 1: reboot to fastboot mode, plug to pc, open ADB cmd prompt and type fastboot oem EDL. But no success because device is still locked bootloader.
Method 2: reboot to fastboot mode, plug in to pc, download fastboot EDL cmd from xda forum, unzip then run edll.cmd, device reboot to mi logo again.
Method 3: in Mi logo, plug in to pc, open cmd prompt, type Adb reboot edl, press enter but device cannot reboot to edl mode because it says I need to tap on confirmation dialog on device. But its not possible since device only load up to mi logo
Click to expand...
Click to collapse
Did you unlock developer mode as in my case I am also stuck in bootloop and fastboot oem edl is not working as developer mode is disabled thus oem is also disabled.
Hey!
I had the same Problem.
Flashing with Miflash was unsuccessfull and then EDL was locked. You can check this when the device is in fastboot and send "fastboot oem edl". Then there may be the message that EDL is locked. In that case you have to build a "deep flash cable". It is pretty easy. You can check this tutorial:
http://en.miui.com/thread-310325-1-1.html
But I would build it another way: Just cut a USB cable and reconnect all wirepairs with the open copper. Now you can just put "ground" and "data+" togehther and follow steps 7 to 9. At point 10 you can just disconnect the wires "ground" and "data+" again, so that all wires are connected normally again. Now you are in EDL and can flash with MiFlash.
Greeting,
My nexus 6P, suddenly while having a phone call, got freeze, then rebooted,
Then it keeps rebooting, showing Google “in white” while booting, then off, restart again “by itself”, and same in loop
Started the device into fastboot mode, selected recovery mode
Again same issue, restart, shows Google “in white” then restart again
Tried to follow the instructions, at [GUIDE] Unlock/Root/Flash for Nexus 6P
https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
Commands and results are here
C:\nexus6p\angler-n4f26o>adb version
Android Debug Bridge version 1.0.36
Revision 0e9850346394-android
C:\nexus6p\angler-n4f26o>adb devices
List of devices attached
<Notice no result returned>
C:\nexus6p\angler-n4f26o>fastboot devices
8XV7N16126000082 fastboot
Please note, I checked those points
ADB and fastboot, downloaded from the link provided in the guide, as well I downloaded it from Google directly
USB driver, updated with latest from google
Java, updated
And of course, I cannot run the device, to do any required configuration on it
And here is a copy of the device details
malibusa said:
Greeting,
My nexus 6P, suddenly while having a phone call, got freeze, then rebooted,
Then it keeps rebooting, showing Google “in white” while booting, then off, restart again “by itself”, and same in loop
Started the device into fastboot mode, selected recovery mode
Again same issue, restart, shows Google “in white” then restart again
Tried to follow the instructions, at [GUIDE] Unlock/Root/Flash for Nexus 6P
https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
Commands and results are here
C:\nexus6p\angler-n4f26o>adb version
Android Debug Bridge version 1.0.36
Revision 0e9850346394-android
C:\nexus6p\angler-n4f26o>adb devices
List of devices attached
<Notice no result returned>
C:\nexus6p\angler-n4f26o>fastboot devices
8XV7N16126000082 fastboot
Please note, I checked those points
ADB and fastboot, downloaded from the link provided in the guide, as well I downloaded it from Google directly
USB driver, updated with latest from google
Java, updated
And of course, I cannot run the device, to do any required configuration on it
And here is a copy of the device details
Click to expand...
Click to collapse
If you can get into bootloader mode then maybe try fastest flashing things like stock recovery. If you manage to get stock recovery then boot into it and adb sideload a stock OTA from Google Developer website. Other than that I'm not too sure, you might need to contact Google/Huawei if that or anything else doesn't work.
---------- Post added at 08:43 PM ---------- Previous post was at 08:35 PM ----------
Okay, in bootloader mode try flashing the stock bootloader image from their OTA by typing fastboot flash bootloader (drag bootloader image here) then type fastboot reboot-bootloader. After that type fastboot flash radio (drag radio image here). Then type fastboot reboot-bootloader again. After that you can try booting up. If you are somehow able to get into recovery mode whether you can boot up normally or not then you can simply adb sideloading the stock OTA. If nothing I have said gets you into recovery or to boot up the device then you are probably screwed to be honest. Good luck
Hi,
thanks for your reply,
let me make sure, that i understood you clearly,
when i boot into bootloader, and select the recovery mode,
it get rebooted, shows Google “in white” then restart again, and again in same loop exactly as if i booted normally, not into the bootloader
as i read in other posts, i should expect the device to show me a confirmation message, or something similar,
but in my case, nothing at all, restart, and keep restarting
The options i have with bootloader are
1- Start
2- Reboot bootloader
3- Recovery mode
4- Power off
5- Barcodes
malibusa said:
Hi,
thanks for your reply,
let me make sure, that i understood you clearly,
when i boot into bootloader, and select the recovery mode,
it get rebooted, shows Google “in white” then restart again, and again in same loop exactly as if i booted normally, not into the bootloader
as i read in other posts, i should expect the device to show me a confirmation message, or something similar,
but in my case, nothing at all, restart, and keep restarting
The options i have with bootloader are
1- Start
2- Reboot bootloader
3- Recovery mode
4- Power off
5- Barcodes
Click to expand...
Click to collapse
In bootloader mode, not recovery try flashing the bootloader and radio like I said.
Hi... RMA your phone... Contact google or Huawei depending where you bought your N6P.
Check this link. A lot of people seem to be in the same situation at the moment:
https://forum.xda-developers.com/nexus-6p/help/boot-loop-death-nexus-6p-t3533528
You're in the same boat as a few of us.
Phone is stuck in a bootloop, won't go to recovery. Only boots to fastboot, but your bootloader is locked so you cannot boot/flash any zips, even official ones. That means no recovery access, which means no adb commands. ADB commands *might* be useful to reboot into EDL mode for QFIL flashing, or for wiping partitions. Problem is - if that bootloader wasn't unlocked, it's not going to be. You need to check "Allow OEM unlocking" in settings BEFORE the phone dies, otherwise you will not be able to unlock the bootloader and thereby reflash the phone.
In a perfect world - we could use EDL mode (or something) to use QFIL/MiFlash to completely rewrite the partitions and MAYBE bring the phone back to life, but the stock bootloader does not allow access to EDL. (tried the custom fastboot.exe meant to send the reboot-edl command, didn't work). If someone can figure out the JTAG pins, we might be able to move forward by purposely bricking it to QHUSB_BULK mode.
The thing is - we don't know why the phones started bootlooping in the first place. For some people, a simple cache wipe/factory reset fixes the loop and away they go. HOWEVER, those of us stuck in fastboot mode with a locked bootloader have no way to erase/wipe/format/write partitions, and even if we could, there's no guarantee it was a software issue that caused the loop in the first place.
TL/DR - You have a locked bootloader and cannot access recovery mode, this means you won't be able to flash/wipe/format partitions or images. Best bet is to contact Huawei/Google, but you'll need the original receipt. If that's not an option for you, you're gonna have to wait until the XDA geniuses out there grant us some answers.
Here's a related thread with some deep info:
https://forum.xda-developers.com/nexus-6p/general/qpst-qfil-answer-to-issues-t3455779
singularoctopi said:
You're in the same boat as a few of us.
Phone is stuck in a bootloop, won't go to recovery. Only boots to fastboot, but your bootloader is locked so you cannot boot/flash any zips, even official ones. That means no recovery access, which means no adb commands. ADB commands *might* be useful to reboot into EDL mode for QFIL flashing, or for wiping partitions. Problem is - if that bootloader wasn't unlocked, it's not going to be. You need to check "Allow OEM unlocking" in settings BEFORE the phone dies, otherwise you will not be able to unlock the bootloader and thereby reflash the phone.
In a perfect world - we could use EDL mode (or something) to use QFIL/MiFlash to completely rewrite the partitions and MAYBE bring the phone back to life, but the stock bootloader does not allow access to EDL. (tried the custom fastboot.exe meant to send the reboot-edl command, didn't work). If someone can figure out the JTAG pins, we might be able to move forward by purposely bricking it to QHUSB_BULK mode.
The thing is - we don't know why the phones started bootlooping in the first place. For some people, a simple cache wipe/factory reset fixes the loop and away they go. HOWEVER, those of us stuck in fastboot mode with a locked bootloader have no way to erase/wipe/format/write partitions, and even if we could, there's no guarantee it was a software issue that caused the loop in the first place.
TL/DR - You have a locked bootloader and cannot access recovery mode, this means you won't be able to flash/wipe/format partitions or images. Best bet is to contact Huawei/Google, but you'll need the original receipt. If that's not an option for you, you're gonna have to wait until the XDA geniuses out there grant us some answers.
Here's a related thread with some deep info:
https://forum.xda-developers.com/nexus-6p/general/qpst-qfil-answer-to-issues-t3455779
Click to expand...
Click to collapse
I'm stuck with a black screen and QFIL and XiaoMiFlash won't work. My bootloader is unlocked but I can't get to fastboot. Screen is always black but Quallcomm HS-USB QDLoader 9008 appears in device manager. No red light or vibration when connecting the phone.
vcharette said:
I'm stuck with a black screen and QFIL and XiaoMiFlash won't work. My bootloader is unlocked but I can't get to fastboot. Screen is always black but Quallcomm HS-USB QDLoader 9008 appears in device manager. No red light or vibration when connecting the phone.
Click to expand...
Click to collapse
Have you read this thread: https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838
Maybe try asking here, explaining the things you tried.
Hey guys, I've been trying to unlock my bootloader so that I can try and root my Maven 3 via Magisk. The problem is, I can't get into the bootloader. If I try to reboot to the bootloader from recovery mode, it just restarts like normal. Same thing when I try using adb commands in the cmd prompt. I am on Windows 7.
I think it could be unlocked trought EDL mode. But we need some expert help
I unlocked my phone with at&t but I think it only unlocked the SIM.
I enabled usb debugging and oem unlock, but when I issue the command (in ubuntu term)
adb reboot bootloader
Click to expand...
Click to collapse
is just boots into the android system.
Any clue on what to do?
I have the same question - bootloader mode will not load when I issue "adb reboot bootloader", nor will it go into bootloader when I go into recovery mode (via POWER + VOLUME UP) and then I choose the "Bootloader" option. The phone just boots into the system. When I use "adb reboot recovery" it does go into recovery mode, and I am able to get a shell and copy files via adb just fine. I am using the latest platform-tools.
This is a ZTE Z835 (Maven 3), AT&T, carrier unlocked phone.
I don't think there is a bootloader... I have not found any fastboot-compatible mode on this device nor have I heard anyone else find one. You have FTM mode (Power + Volume Down) and EDL mode (adb reboot edl). EDL mode lets it work with QFIL, and with QFIL, you can literally dump and modify any partition on the device you want... I'm not sure what else you want. There's a new method for unlocking the bootloader https://www.xda-developers.com/unlock-bootloader-zte-phones/. I found that my devinfo partition was already unlocked, but you may need to check. I'm going to try and figure out how to create a recovery.bin partition able to be flashed in QFIL.
Hi, i'm trying to root my Xiaomi Mi A1 after updating it by OTA and I always get a bootloop on the android one screen.
I explain a little what I did, I had xposed and root on 8.1 with magisk, uninstalled them correctly, and then update to android 9.
Now, with the version 10.0.5.0.PDHMIXM of february, I tried to patch the boot.img from Magisk and then load it both from fastboot, as well as load trough the recovery of twrp, but the same result always happens, when reboot it stays in bootloop and I have I put back the stock boot.img unouching.
Also, in the status of the safety net looked at magisk I get ctsProfile: false, I do not know if it will have something to do
Can someone please help me root the phone?
Need some help, please
Hello.
Let's go.
If it's bootlooped do the next:
1. Download official latest ROM from this Mi site https://en.miui.com/download-333.html by clicking on green tab. After downloading finished, must twice extraxt it till have some yellow folder.
Download and install MFT from this link http://api.bbs.miui.com/url/MiFlash
2. Press&Hold Vol- button till phone goes to bootloader FASTBOOT mode
3. In opened "cmd/adb" on Your PC type "fastboot devices" to verify your phone
4. Check for bootloader is unlocked with "fastboot oem unlock". If it's unlocked You'll get a message "Your b/l is allredy unlocked", if not, Your phone will reboot and must quickly press&hold Vol- button to boot again in to FASTBOOT mode
5. When phone is connected in f/b mode type "fastboot oem edl" and wait Your phone reboot to EDL mode (black screen on display wit LED rapidly blinking)
6. Start Mi Flash Tool and do Refresh button to connect with the phone, click "select" button to navigate to the ROM folder from point 1. and check "save user data" on the bottom right (or check "clean all", as You wish)
7. After all, click "flash" button and be patient for a couple of a minutes when phone flashing. After a good yob you'll get a green colored message "success" to the right side of a MFT window.
8. That's it. Long press Power button on phone and wait till vibrate. Release it and boot to system. Let it update to February update and then do the steps from post "[GUIDE] Rooting Mi A1 without TWRP"
Enjoy!
P.S. Your BootLoader remains unlocked with options selected from point 6. but apps and system will be wiped out! Selecting on own risk!
zorzgeo said:
Hello.
Let's go.
If it's bootlooped do the next:
1. Download official latest ROM from this Mi site https://en.miui.com/download-333.html by clicking on green tab. After downloading finished, must twice extraxt it till have some yellow folder.
Download and install MFT from this link http://api.bbs.miui.com/url/MiFlash
2. Press&Hold Vol- button till phone goes to bootloader FASTBOOT mode
3. In opened "cmd/adb" on Your PC type "fastboot devices" to verify your phone
4. Check for bootloader is unlocked with "fastboot oem unlock". If it's unlocked You'll get a message "Your b/l is allredy unlocked", if not, Your phone will reboot and must quickly press&hold Vol- button to boot again in to FASTBOOT mode
5. When phone is connected in f/b mode type "fastboot oem edl" and wait Your phone reboot to EDL mode (black screen on display wit LED rapidly blinking)
6. Start Mi Flash Tool and do Refresh button to connect with the phone, click "select" button to navigate to the ROM folder from point 1. and check "save user data" on the bottom right (or check "clean all", as You wish)
7. After all, click "flash" button and be patient for a couple of a minutes when phone flashing. After a good yob you'll get a green colored message "success" to the right side of a MFT window.
8. That's it. Long press Power button on phone and wait till vibrate. Release it and boot to system. Let it update to February update and then do the steps from post "[GUIDE] Rooting Mi A1 without TWRP"
Enjoy!
P.S. Your BootLoader remains unlocked with options selected from point 6. but apps and system will be wiped out! Selecting on own risk!
Click to expand...
Click to collapse
First for clearence, my phone its unlocked because im was get root previously.
Im try to do all, but only got this log in XFT:
Code:
[0,02 COM8]:[COM8]:start flash.
[2,08 COM8]:cannot receive hello packet,MiFlash is trying to reset status!
[4,58 COM8]:cannot receive hello packet,MiFlash is trying to reset status!
[7,09 COM8]:try to reset status.
[7,09 COM8]:Switch mode back
[7,09 COM8]:cannot receive hello packet,MiFlash is trying to reset status!
[7,09 COM8]: Object reference not set as an instance of an object.
I'm on 10.5 february patch and in the official website the last version is 10.4 january patch, can this is the problem?
Thanks for your help
Did adb or fastboot commands recognise Your phone?
I am thinking Your phone isn't recognised by system/phone drivers damaged!
Sent from my Mi A1 using Tapatalk
zorzgeo said:
Did adb or fastboot commands recognise Your phone?
I am thinking Your phone isn't recognised by system/phone drivers damaged!
Sent from my Mi A1 using Tapatalk
Click to expand...
Click to collapse
That's it, my drivers are dysfunctional, reinstall them i can root finally my phone.
Really thanks zorzego
zorzgeo said:
Hello.
Let's go.
If it's bootlooped do the next:
1. Download official latest ROM from this Mi site https://en.miui.com/download-333.html by clicking on green tab. After downloading finished, must twice extraxt it till have some yellow folder.
Download and install MFT from this link http://api.bbs.miui.com/url/MiFlash
2. Press&Hold Vol- button till phone goes to bootloader FASTBOOT mode
3. In opened "cmd/adb" on Your PC type "fastboot devices" to verify your phone
4. Check for bootloader is unlocked with "fastboot oem unlock". If it's unlocked You'll get a message "Your b/l is allredy unlocked", if not, Your phone will reboot and must quickly press&hold Vol- button to boot again in to FASTBOOT mode
5. When phone is connected in f/b mode type "fastboot oem edl" and wait Your phone reboot to EDL mode (black screen on display wit LED rapidly blinking)
6. Start Mi Flash Tool and do Refresh button to connect with the phone, click "select" button to navigate to the ROM folder from point 1. and check "save user data" on the bottom right (or check "clean all", as You wish)
7. After all, click "flash" button and be patient for a couple of a minutes when phone flashing. After a good yob you'll get a green colored message "success" to the right side of a MFT window.
8. That's it. Long press Power button on phone and wait till vibrate. Release it and boot to system. Let it update to February update and then do the steps from post "[GUIDE] Rooting Mi A1 without TWRP"
Enjoy!
P.S. Your BootLoader remains unlocked with options selected from point 6. but apps and system will be wiped out! Selecting on own risk!
Click to expand...
Click to collapse
What's that EDL mode & why it's necesary to go into that EDL mode before flashing STOCK ROM? I've done flashing stock rom in MiA1 Oreo but never heard of that step (entering EDL mode) so asking. Is that something new that needs to be done nw for & from Pie update? Someone kindly explain
Warft said:
Hi, i'm trying to root my Xiaomi Mi A1 after updating it by OTA and I always get a bootloop on the android one screen.
I explain a little what I did, I had xposed and root on 8.1 with magisk, uninstalled them correctly, and then update to android 9.
Now, with the version 10.0.5.0.PDHMIXM of february, I tried to patch the boot.img from Magisk and then load it both from fastboot, as well as load trough the recovery of twrp, but the same result always happens, when reboot it stays in bootloop and I have I put back the stock boot.img unouching.
Also, in the status of the safety net looked at magisk I get ctsProfile: false, I do not know if it will have something to do
Can someone please help me root the phone?
Click to expand...
Click to collapse
My friend, do this to repair Bata cellphone, ... 1. enter fastboot mode and unlock oem and do twrp.img boot 2. after you enter twrp, install TWRP installer and install ROM via twrp (android version 5 rom 9, the official version is 4 which can be flashed via miflash tools). Then reboot the system and enjoy ... if you want to root do install magisk via twrp recovery ... give your answer after trying this. Very happy to help later.
.
My friend, do this to repair Bata cellphone, ... 1. enter fastboot mode and unlock oem and do twrp.img boot 2. after you enter twrp, install TWRP installer and install ROM via twrp (android version 5 rom 9, the official version is 4 which can be flashed via miflash tools). Then reboot the system and enjoy ... if you want to root do install magisk via twrp recovery ... give your answer after trying this. Very happy to help later.
My Mi 9T is stuck in "this device is destoryed" mode and I cannot access recovery
My bootlooader is locked and recovery is unaccessible. Please help me to unlock my phone if I can.
Coolness3579 said:
My bootlooader is locked and recovery is unaccessible. Please help me to unlock my phone if I can.
Click to expand...
Click to collapse
What u did that cause this?
Fastboot and miflash?
if the device has locked bootloader you have no way other than opening up thhe back glass and putting it on edl mode
BAYmustafa96 said:
if the device has locked bootloader you have no way other than opening up thhe back glass and putting it on edl mode
Click to expand...
Click to collapse
Ok thanks I will send it in to a shop where someone can do that
Connect phone to pc, start adb on pc...put phone in fastboot mode ( press volume - and power ) , type in adb
fastboot continue
After command, phone will reboot and boot system.
After that , you add mi acc and start unlock process.
If you reboot phone, you need to do this step again.
When you unlock bootloader, flash official rom or xiaomi.eu...
You could flash official xiaomi fastboot rom with Miflash tool: this flash recovery and MIUI also with BL locked.
Then you'll use miunlock tool to unlock bootloader
GGelmi
did your problem solved?