Everything is going great until I gave the command "fastboot -i 0x1ebf boot recovery.img " after this nothing had happened the Mobile was still on fastboot mode after that I removed the USB cable then it boot up normally.
Plzzz help guys, I'm searching for my answer from past few days I've already spent 2-3 hrs everyday but didn't get my answer up till now so I've decided make a new thread.
DEVICE : Yureka Plus.
OS : COS 12.1
Bootloader: unlocked.
Rooted : No (still trying to).
When every i try lock and relock my bootloader i cant because fastboot says stat not match i cannot do anything i tried flashing mm but it says command not allowed and i cant lock my boot loader and unlock it to allow it how can i get past this? Adb cannot see muly phone i cant boot into twrp and i only have access yo fastboot mode as erecovery didnt work with my un offical nrd90m update.
Hello,
I have a galaxsy s5 906k and I've been reading on how to unlock the bootloader as I'm trying to install Remix OS and it seems I've come across a lot of misinformation.... and if possible can someone tell me what exactly I need to unlock the bootloader, as I can't find a list of the appropriate tools? Do I need twrp for my specific device?? Some have said yes and some no.
My phone is already rooted.
Also post unlock bootloader question, can I use the 900k rom from remix to install on my 906k?
EDIT**
I can only boot into download mode, not fastboot mode. adb devices returns the device, but fastboot devices returns nothing. Tried adb reboot-bootloader`and it just shows waiting for any device.
These all boot into download/odin mode!!!!!!
adb reboot download
adb reboot bootloader / adb reboot-bootloader
fastboot oem unlock
fastboot flashing unlock
Only one that boots into recovery mode! Then I go to Reboot to bootloader and it comes back to recovery mode!!!!!!!!!!
adb reboot recovery
I messed up.
Flashed LineageOS 14.1,
Forgot to flash gaaps,
Afterward, for some reason could not enter TWRP and in 'Developers Options ' there was no option to OEM Unlock so I could not do 'fastboot flash recovery recovery.img' to regain TWRP.
tried to use the 'dload' method to return to stock 6.0.
message said uptade successful.
The phone now does not boot, does not enter erecovery, does not enter the updater (Power Button+Vol. Up+Vol. Down)
Only thing it does is enter fastboot (it says PHONE Unlocked and FRP Lock).
Can you help me?
Edit 1 : In fastboot mode only commands with fastboot work, no adb.
Because it is a Huawei the command 'fastboot oem unlock' does not work.
Edit 2 :Tried to 'fastboot flash system sistem.img' to flash the system.img from the update.app of stock android, unfortunately with the phone OEM Locked there is very little I can do with fastboot.
If anyone can direct me to a fastboot friendly update.zip that has the android-info.txt that seems to be required for for flashing I would apreciate it. (I have read that you can flash google-signed update.zip's while having OEM Lock)
Edit 3 : Looking through XDA I have found user with a similar issue to mine that have been able to enter recovery update after either letting the batery run dry or using fastboot to erase/format userdata and cache, the result for me is again 'FAILED (remote: Command not allowed)'.
Will be sending the P9 to Huawei and see what they can do with this.
Edit 4 : Huawei replaced the board and the battery (apparently it died during the trip to the repair center) they accepted the warranty despite the fact the phone was stuck on the warning screen that said the phone was unlocked.
Hi.
I´ve unlocked the bootloader on my P10 plus.
But now, the toggle to unlock OEM on the developer settings is greyed and I can´t perform any fastboot commands.
Any help?
Thanks
I believe the option becomes disabled when you've unlocked the bootloader, as you'd have to use the relock command instead of the toggle to relock it.
I assume you're familiar with accessing and using fastboot if you've unlocked your bootloader... so for the fastboot commands, does the device show up when plugged in and you run "fastboot devices"?
singularoctopi said:
I believe the option becomes disabled when you've unlocked the bootloader, as you'd have to use the relock command instead of the toggle to relock it.
I assume you're familiar with accessing and using fastboot if you've unlocked your bootloader... so for the fastboot commands, does the device show up when plugged in and you run "fastboot devices"?
Click to expand...
Click to collapse
me to
i try to relock my oem using this command fastboot oem relock (16 unlock code)
after that my p10 plus is restart then i show only are
HUAWEI ERECOVEY
(DOWNLOAD LATEST VERSION AND RECOVER)
(REBOOT)
(SHUTDOWN)
i already try the download but always failed,
and i try the adb by vol down+usb then i see this in FASBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
but i type fastboot devices its connected i show my product code? i dont know what thats code
then i try install twrp always failed
i dont know what happen . i cannot open my p10 plus now always in
“HUAWEI ERECOVEY”
the same is happening to me
Eyezcripz said:
me to
i try to relock my oem using this command fastboot oem relock (16 unlock code)
after that my p10 plus is restart then i show only are
HUAWEI ERECOVEY
(DOWNLOAD LATEST VERSION AND RECOVER)
(REBOOT)
(SHUTDOWN)
i already try the download but always failed,
and i try the adb by vol down+usb then i see this in FASBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
but i type fastboot devices its connected i show my product code? i dont know what thats code
then i try install twrp always failed
i dont know what happen . i cannot open my p10 plus now always in
“HUAWEI ERECOVEY”
Click to expand...
Click to collapse
i have my huawei p10 plus doing the same thing of yours.....only erecovery mode and when i get to boot in fastboot mode is only fatboot mode & rescue and i had locked bootloader and frp lock.....but i was reading that huawei just block the page to unlock bootloader i just dont know why they did that /......
Maybe try re-unlocking and flashing stock rom, kernel, system, and boot. (Or you can try the method I used to update manually). Requires to be able to acces external sd card.
Hmu if you want to know how.