Database Users

olephobic coating DIY

Has any one tried this
http://www.ifixit.com/Guide/HOW+TO+COAT+Anti+Fingerprint+Oleophobic+Coating+by+yourself/9682/1
this is for those who love to have the clear screen protectors but hate the fingerprint and oil .. since the oleophobic SPs are very expensive.
If any one tried this please share your reviews..

Need oleophobic solhtion like this too
Sent from my C6602 using xda app-developers app

anirudhks said:
Has any one tried this
http://www.ifixit.com/Guide/HOW+TO+COAT+Anti+Fingerprint+Oleophobic+Coating+by+yourself/9682/1
this is for those who love to have the clear screen protectors but hate the fingerprint and oil .. since the oleophobic SPs are very expensive.
If any one tried this please share your reviews..
Click to expand...
Click to collapse
I have this the fusso smartphone coating
The phone is much easier to keep clean, deep exhale on the glass followed by a couple of rubs with a cloth
Remember though that it adds no extra protection like the spg glas protectors
I had to import my fusso from Japan as it was the cheapest, if I was to wait a few weeks I could have had a spg for not much more money
Sent from my Nexus 7 using xda premium

searley said:
I have this the fusso smartphone coating
The phone is much easier to keep clean, deep exhale on the glass followed by a couple of rubs with a cloth
Remember though that it adds no extra protection like the spg glas protectors
I had to import my fusso from Japan as it was the cheapest, if I was to wait a few weeks I could have had a spg for not much more money
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
So you can apply this only on the naked screen or also on the normal clear Screen protectors? coz I am just exploring few places where I can source this for much cheaper than the price quoted on amazon

Be VERY careful with this stuff. I used this on my wife's Xperia Go phone and accidently got some of the product in the lower microphone. After that happened it her speech was all muddled and there was an echo....
Other than that, it was very very good. I also applied this to my Moto Razr HD (avoiding contact with the microphone) and it lasted about 2 months before requiring a re-application.
Another product I've used with even better results, is Optimum Opti Coat 2.0. This stuff is used on cars (both my cars are coated) and its simply amazing. I have found this product lasts about 12 months with pretty hard wearing.

cheetah2k said:
Be VERY careful with this stuff. I used this on my wife's Xperia Go phone and accidently got some of the product in the lower microphone. After that happened it her speech was all muddled and there was an echo....
Other than that, it was very very good. I also applied this to my Moto Razr HD (avoiding contact with the microphone) and it lasted about 2 months before requiring a re-application.
Another product I've used with even better results, is Optimum Opti Coat 2.0. This stuff is used on cars (both my cars are coated) and its simply amazing. I have found this product lasts about 12 months with pretty hard wearing.
Click to expand...
Click to collapse
so this actually repels finger prints and smudges? as in no oily residue on the screen .. I am looking at mainly something like a mAtte screen finish but full clarity ... effective i want to have clear view with no finger prints

No you still get finger prints but they are easier to wipe off
Sent from my C6603 using xda premium

searley said:
No you still get finger prints but they are easier to wipe off
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
ah ok .. makes sense ...

I've applied Gtechnique G1 - 2 coats on front and back.
It's not fingerprint-proof, but definitely picks up much less oils, and it's easier to clean too.
And you get a nice beading of water droplets

luke997 said:
I've applied Gtechnique G1 - 2 coats on front and back.
It's not fingerprint-proof, but definitely picks up much less oils, and it's easier to clean too.
And you get a nice beading of water droplets
Click to expand...
Click to collapse
I have always wondered how the actual phones in the ADs and demo videos they show have a kinda a reflective surface thts not shiny like mirror look you get on a clear screen protector , they more look like a matte finish is it because of this coating?

anirudhks said:
I have always wondered how the actual phones in the ADs and demo videos they show have a kinda a reflective surface thts not shiny like mirror look you get on a clear screen protector , they more look like a matte finish is it because of this coating?
Click to expand...
Click to collapse
The G1 does not affect optical properties of the glass in any way, it is a nano coat with a thickness. ca. 10-20nm.

luke997 said:
The G1 does not affect optical properties of the glass in any way, it is a nano coat with a thickness. ca. 10-20nm.
Click to expand...
Click to collapse
so what kinda screens are those that appear in the ADS ? they look so brilliant as in not the display brightness
but the off Screen which is awsome like this below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
look at the shiny portion it looks like a matte finish but bright

How long will 1 kit last?
cheetah2k said:
Be VERY careful with this stuff. I used this on my wife's Xperia Go phone and accidently got some of the product in the lower microphone. After that happened it her speech was all muddled and there was an echo....
Other than that, it was very very good. I also applied this to my Moto Razr HD (avoiding contact with the microphone) and it lasted about 2 months before requiring a re-application.
Another product I've used with even better results, is Optimum Opti Coat 2.0. This stuff is used on cars (both my cars are coated) and its simply amazing. I have found this product lasts about 12 months with pretty hard wearing.
Click to expand...
Click to collapse
Do you mean... 1 kit of fusso coating is only enough for 2 months? I saw a video on YouTube where it says it's necessary to reapply after a couple of days 2 or 3 times more in order to works perfectly. That makes me think... One kit=one protection?
About optimum coat.. Did you apply it directly on the glass surface or it works as well on a plastic screen protector? I'm asking because Xperia Z comes with a factory pre applied screen protector made of plastic, very slippery, fingerprint and dust magnet and very hard to clean up that they call Anti Shatter film...

if I am not getting it wrong, this only make fingerprints easier to clean but not reducing them. is it?

I got some anti-glare screen protectors for the front and back. They don't leave any fingerprints on them at all. Maybe try them instead.
Sent from my C6603 using xda premium

*boy*racer* said:
I got some anti-glare screen protectors for the front and back. They don't leave any fingerprints on them at all. Maybe try them instead.
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
I think it will also turn the back less slippery, right? It must be a way to get a better grip without covering this beautiful phone with some case...

Pixel XL losing paint on the edge of the phone

Well this sucks, I want to start off by saying I have yet to drop this phone and I have had it in a Spigen case with a screen protector since day one.
So I'm sitting in a meeting during work and I took my case off my phone to clean between the case and screen protector since it isn't flush, and I noticed beneath where the case sits on the left edge slightly below half way of the phone that the paint is scrapping off. I am wondering if anyone else has been losing paint on the border near where the screen glass is? The case I have been using is Spigen Rugged Armor. I also take the case off maybe once every other week.

I pre-ordered mine the day they announced it and got it shortly after the first wave started shipping. The other day I noticed that the bottom of mine was chipping away. I contacted Google Fi support and they're shipping me a new one.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

T1Pimp said:
I pre-ordered mine the day they announced it and got it shortly after the first wave started shipping. The other day I noticed that the bottom of mine was chipping away. I contacted Google Fi support and they're shipping me a new one.
Click to expand...
Click to collapse
That's similar to my chipping, I just got off the phone with support and they're looking into what can be done...

I wish I had the support you received! They told me it is what it is basically... and here I was hoping I was done shopping for phones...
Edit: I did try mentioning you experienced the same issue and contacted Fi Support instead of the CS I spoke to, they said you must have had other software/hardware related issues to get the device replaced...

Deal breaker! Canceled my order! I don't do cheap paint. Thanks for posting this.

Still beats the experience I had with the Jet Black iPhone 7+. Scratch and fingerprint magnet.

mjs2011 said:
Still beats the experience I had with the Jet Black iPhone 7+. Scratch and fingerprint magnet.
Click to expand...
Click to collapse
Are you really comparing glossy finnish to matte finnish ?

FalconFX said:
Are you really comparing glossy finnish to matte finnish ?
Click to expand...
Click to collapse
No

mjs2011 said:
No
Click to expand...
Click to collapse
The way you put it definitely says otherwise

FalconFX said:
The way you put it definitely says otherwise
Click to expand...
Click to collapse
I want comparing material. Just making a general comment about the Jet Black iPhone 7

So this gonna happen to all the Pixel phones or what?

Got 2 see the same thing Today. I was very angry!!! Contacts German telekom and they will replace
Gesendet von meinem Pixel XL mit Tapatalk

Hmm, black 32GB here. No case ever used.
Not a single scratch or chip or flake of paint lost yet.
I've got a skin that's been sitting in the mailing package for a couple weeks now.
I've been too lazy to put it on.
I may have to think about doing that soon.

Getting phone replaced for something that is most likely to happen again? Just wondering what you plan on doing when the paint chips on the replacement?

mine is the same, pain is missing from the sharper edges in the style of chips, the rounded edges in places have signs of wear as if I have managed to wear the pain down. not a great sign in a little over a month, guess it is just cheap paint on them, worst comes to the worst I'll just get a slim case to put over it.

zathus said:
Deal breaker! Canceled my order! I don't do cheap paint. Thanks for posting this.
Click to expand...
Click to collapse
ithehappy said:
So this gonna happen to all the Pixel phones or what?
Click to expand...
Click to collapse
Belimawr said:
mine is the same, pain is missing from the sharper edges in the style of chips, the rounded edges in places have signs of wear as if I have managed to wear the pain down. not a great sign in a little over a month, guess it is just cheap paint on them, worst comes to the worst I'll just get a slim case to put over it.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
This!
|
|
\/
CZ Eddie said:
Hmm, black 32GB here. No case ever used.
Not a single scratch or chip or flake of paint lost yet.
I've got a skin that's been sitting in the mailing package for a couple weeks now.
I've been too lazy to put it on.
I may have to think about doing that soon.
Click to expand...
Click to collapse
I have ZERO issues with the hardware or software. I think people are having one off situations. Out of the millions of phones out there; there are only a few reporting issues like this.
I had mine since they went live (at BestBuy) and have yet to experience any issue. And I only have a hard case to cover the sides. The top and botton have no protection...
So to those with issues... Do you keep your keys in the same pocket as phone? Could something be rubbing it the wrong way?
I always keep my phone in my left front pocket withe nothing else in it.

Is this happening with a case on your device...?
Sent from my Pixel XL using XDA-Developers mobile app

it's in a pocket on it's own and it's not only the chips on the hard corners it's wear on some of the smoother corners as if it has been rubbed off. I do work in the building industry so it will come into contact with some abrasive materials in my pocket but it's the first phone I've had this issue with, but then it's also the first phone I've had with so much metal on it, it could just come down to a mix of the larger metal surface and the paint not being finished in a durable way.
I don't use a case and never have since about the Z1, it just seems like this phone is going to force me to put it in a case before 6 months is up due to the paint wearing badly.

Not a single blemish on my paint (or glass for that matter) and my phone comes in out and of pocket many times a day, sometimes with a pocket that has a metal rivet above it that it rubs against as going in/out. Black XL 32GB

I have a bear motion on mine (waiting on nillkin nature tpu delivery), just checked to make sure, no nicks dings scratches or swirls. I put it in the same left pocket alone in every pair of pants I wear. Nothing ever goes into the left pocket, except maybe some pills. I don't stick my hands in my pockets when they are dirty or dusty.
This is anodized aluminium, having it hit against anything will scratch and ding them, as happens with anything make with the same material.

What case are you using today?

I am a huge fan of cases and I like buying and changing them frequently. I recently got the S9+ and a Spigen Ultra Hbyrid S transparent case.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I checked Amazon UK but I didn't find any cases I particularly liked, so what are some of your recommendations?

I have the ringke rearth fusion case, rhinoshield bumper case and a tumi case. I'm currently using the ringke case because it's clear and gives an illusion of less bezels than the other two but gives enough protection for my use

@corwin_amber Wow.. that's one of the best looking cases I've ever seen. I believe I had a case made from the same material back in the day for my iPhone 4 or 5. I might have to order one from Amazon UK because it's the same price after discount and of course delivers a lot faster by Prime. Thank you for the suggestion, I really love the case!

You are welcome. And of course I would do the same in that... case (haha).

Zizo bolt doing great job.

OtterBox Pursuit Series.

Rhinoshield Solid Suit in black

Nillkin Synthetic Fiber case.

madvinegar said:
Nillkin Synthetic Fiber case.
Click to expand...
Click to collapse
I'd definitely go with that one.

I am rocking my favorite case of all time, Diztronic.

Anyone have Obliq Slim meta case?

spigen rugged armor

Mine
Sent from my SM-G965U1 using Tapatalk

Have been using Nillkin Nature series on my every phone since Sony Z3. Love that it adds literally no bulk, shows the phone as it's transparent and the quality is top notch. Protection is not the best but I am very careful with my phones and never broke one in last 10 years.

OtterBox Defender.
Love the case, fits really well and feels good in the hand, port covers should limit the dirt and dust that gets into the ports and as a tradie the belt holster is essential.
Only issue I have with the case is that because the phone and case is so big you actually have to look at the phone when you're putting it back in the holster otherwise you probably won't get it in first go or your shirt/jumper/jacket will get stuck in between and the phone won't lock in and it'll hit the deck. My phone has survived several drops because of this issue, however it has so far not taken any damage... What had happened a few times though is that I've scraped the screen against the locking tab on the holster whilst shoving it in, this has resulted in a couple of micro scratches on the screen, these are only really visible when I clean the screen really well, a few fingerprints are all it takes to cover them up.
I probably should install a decent screen protector but all of the ones I've looked at are either a pain to install (Whitestone Dome and others), only have adhesive on the edges, have "grid/dot Matrix technology" (how is this a positive feature, many manufacturers advertise this way) or are only tpu or other non glass film.
Also I'm too lazy/OCD to actually get around to fitting screen protectors even when I do buy them.

Im using the Unicorn Beetle Pro by SUPCASE.
https://www.amazon.com/gp/aw/d/B079BS4ZQ4
I've had several low height drops and even 1 drop from ear level onto pure asphalt!!! (I'm 6' tall) and the case protected the phone beautifully... Not even so much as a scratch. The case adds a bit of bulk to the phone but you get great protection.
Just a side note, I ordered this case while my Galaxy s9+ was still on preorder waiting to ship, and this is the only case I've used on it... Still holding up great. I'm considering taking the plastic screen protector out and getting a Whitestone Dome screen protector.

madvinegar said:
Nillkin Synthetic Fiber case.
Click to expand...
Click to collapse
HI
Very nice case.
In your opinion, would the case interfere with a tempered glass screen protector?
Thank you
Jay

j1978 said:
HI
Very nice case.
In your opinion, would the case interfere with a tempered glass screen protector?
Thank you
Jay
Click to expand...
Click to collapse
No, not at all. I use the case with whitedome glass screen protector without any problem.

madvinegar said:
No, not at all. I use the case with whitedome glass screen protector without any problem.
Click to expand...
Click to collapse
Ok thanks. That is exactly what i wanted to know
Jay

Official Alcantara one, alternating with the clear and silicone one, from Samsung's official lineup.
Still, the best is the alcantara case, hand feel is so smooth.

Redmi Note 7 Case

Just received my phone yesterday and set it up. Now I'm trying to figure out which case would be good to protect it. That one that comes with it is good for fingerprints but won't really protect it as the rear camera sticks up and it doesn't even protect the front screen as it's not high enough. Any thoughts on what case may work well, or ones to avoid? I'll start looking. Thanks.

iBetter, awesome case. Protect camera lens by . 1mm. Can buy on Amazon.de or .co.uk. Maybe .com too.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

kennyk09 said:
iBetter, awesome case. Protect camera lens by . 1mm. Can buy on Amazon.de or .co.uk. Maybe .com too.
Click to expand...
Click to collapse
Thanks. I saw one like that. But it's not available in the US.

Aures Batna said:
View attachment 4756791
Click to expand...
Click to collapse
Thanks. I'll check it out.

Spigen, but its quiet heavy when it’s put on the phone

Skeuomorphic said:
Spigen, but its quiet heavy when it’s put on the phone
Click to expand...
Click to collapse
Thanks.

why hide beautiful hardware under a case?

Always the original Xiaomi. Don't buy yellow, getting dirty soon.
https://m.aliexpress.com/item/32976...d=7774amp-PPt-LZVqXlIsOsI65vSVZQ1557554229782

Aaagogo said:
why hide beautiful hardware under a case?
Click to expand...
Click to collapse
I know but if I drop it the front or back may shatter. I know it's Gorilla glass 5, but it's still glass. I'm looking for a case that's not too overpowering but still protects it. Something clear maybe with some bumpers in the corners and that rises up above the lenses on the back to keep them from getting scratched. I'll find something. Thanks.

BCE111 said:
I know but if I drop it the front or back may shatter. I know it's Gorilla 5 glass, but it's still glass. I'm looking for a case that's not too overpowering but still protects it. Something clear maybe with some bumpers in the corners and that rises up above the lenses on the back to keep them from getting scratched. I'll find something. Thanks.
Click to expand...
Click to collapse
as my RSM once told me "eh soldier, you are not supposed to drop your phone you know?"
i'm waiting on my flex filament to arrive before i print out my corner studs. that's the only acceptable "protection" to me to minimally detract from the beautiful hardware.

Aaagogo said:
as my RSM once told me "eh soldier, you are not supposed to drop your phone you know?"
i'm waiting on my flex filament to arrive before i print out my corner studs. that's the only acceptable "protection" to me to minimally detract from the beautiful hardware.
Click to expand...
Click to collapse
I know. That's what I'm talking about. Do you have a 3D printer? I guess you'll leave the lenses unprotected in the back. I bought this one about a week ago, but it may take another week or so to get to me. If it seems good once it arrives I'll let you all know. https://www.ebay.com/itm/For-Xiaomi...Slim-Soft-TPU-AirBag-Case-Cover-/123666850179. Thanks.

BCE111 said:
I know. That's what I'm talking about. Do you have a 3D printer? I guess you'll leave the lenses unprotected in the back. I bought this one about a week ago, but it may take another week or so to get to me. If it seems good once it arrives I'll let you all know. https://www.ebay.com/itm/For-Xiaomi...Slim-Soft-TPU-AirBag-Case-Cover-/123666850179. Thanks.
Click to expand...
Click to collapse
yupe, have a printer,
i have designed my corner to take into account of the additional height offset of the protruding lens,
i also made the top right piece into 1 huge piece to include a skirt around the lens.

Aaagogo said:
yupe, have a printer,
i have designed my corner to take into account of the additional height offset of the protruding lens,
i also made the top right piece into 1 huge piece to include a skirt around the lens.
Click to expand...
Click to collapse
Really cool. You'll have to show us the final product once it's done. What do you think of the one I bought? It looks a little overwhelming, but it's the best one I found so far. And it was cheap. This one's unobtrusive and looks good, but I'm not sure it provides protection for the back lenses, and also it doesn't have any corner protection. https://www.ebay.com/itm/For-Xiaomi...-Clear-Case-Cover-Tempered-Glass/254208605942
Heading back to bed. It's after 1 am here. I'll check back in later today.

BCE111 said:
Really cool. You'll have to show us the final product once it's done. What do you think of the one I bought? It looks a little overwhelming, but it's the best one I found so far. And it was cheap. This one's unobtrusive and looks good, but I'm not sure it provides protection for the back lenses, and also it doesn't have any corner protection. https://www.ebay.com/itm/For-Xiaomi...-Clear-Case-Cover-Tempered-Glass/254208605942
Heading back to bed. It's after 1 am here. I'll check back in later today.
Click to expand...
Click to collapse
looks similar to the clear silicon case they threw in with sans the color highlights.
visually clear is the best, but you are still missing out on the feel of the hardware. you should really try the phone without protection, RAW is best. i like the feel of the phone a lot and it's a fingerprint magnet.
the best advice i can give you to not drop your phone is to not pick up the phone so much. The more time the phone spends not in your hands is proportional to the risk of phone drops. while the time the phone spends in your hands exponentially increases the phone drop risk.

Sûrement la meilleur
https://m.fr.aliexpress.com/item/32977882784.html
Je l'ai pris en noir

I got myself this one...
https://www.amazon.es/gp/product/B07P69T2B9/ref=ppx_yo_dt_b_asin_title_o02_s00
Combined with the magnet holder just ideal...
https://www.amazon.es/gp/product/B01MU4ZU2H/ref=ppx_yo_dt_b_asin_title_o01_s00

I love this case:
https://www.aliexpress.com/item/32970318863.html
The navy blue one looks really nice and it protects well. Plus it's $4, so that's an easy call to make.

smeatr0n said:
I love this case:
https://www.aliexpress.com/item/32970318863.html
The navy blue one looks really nice and it protects well. Plus it's $4, so that's an easy call to make.
Click to expand...
Click to collapse
Looks very protective. Thanks.

You're not just worried about the front/back but the sides as well.
This week my Ferilnso 2.5d tempered glass cracked while my brand new 1 week old Redmi Note 7 was in my pocket.
Somehow a tiny piece of glass shard made its way into the side of my free RN7's case and managed to scuff a small section on side of my phone.
You can only imagine how pissed I was finding out my glass screen protector not only cracked BUT also scuffed the side of my phone WHILE IT WAS IN THE FREAKING CASE!!!!
Moral of the story, you want full protection including the sides not just the front/back glass.
I'm now on the hunt for a better quality case than the free one Xiaomi gives us in the box
BCE111 said:
I know but if I drop it the front or back may shatter. I know it's Gorilla glass 5, but it's still glass. I'm looking for a case that's not too overpowering but still protects it. Something clear maybe with some bumpers in the corners and that rises up above the lenses on the back to keep them from getting scratched. I'll find something. Thanks.
Click to expand...
Click to collapse
Trying to find a Rexang clear case for my RN7 similar quality to the blue and rose gold cases my wife and I had on our old Honor 8 phones.
Also had a very similar style goosberry brand case in gold on my old Note 4.
Those cases were so durable. Cannot tell you how many times the phone fell on hard surfaces and nothing happened. AND the case still looked good after lol

Galaxy Note 10 Plus Skins.

I pre-ordered my Galaxy Note 10 plus and Black camo skins at the same time. Already got the Gadgetshieldz black camo skin and now waiting for my Note 10 plus.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

How long did they take to come in??

oneandroidnut said:
How long did they take to come in??
Click to expand...
Click to collapse
It took me around 2 days.

Link?

20degrees said:
Link?
Click to expand...
Click to collapse
Here you go
https://www.gadgetshieldz.com/galaxy-note-10-plus-skins-covers-wraps.html

Here you go , Messed up the alignment well this what happens if you rush things
I have with Ringke Fusion-X DDP Came Black case it looks sick

Got the green Dbrand camo on mine. No camera skin. Never use em. Gonna try other skins.

vinumsv said:
Here you go , Messed up the alignment well this what happens if you rush things
I have with Ringke Fusion-X DDP Came Black case it looks sick
Click to expand...
Click to collapse
I also got black camo and it fits perfectly alright. I think you should have aligned it slightly downwards..Yes, its really hard to be patient when you apply these skins..

vinumsv said:
Here you go , Messed up the alignment well this what happens if you rush things
I have with Ringke Fusion-X DDP Came Black case it looks sick
Click to expand...
Click to collapse
That doesn't went well

ArunRocker said:
That doesn't went well
Click to expand...
Click to collapse
ikr ... anway its hidden behind my samsung clear view case so all good

vinumsv said:
ikr ... anway its hidden behind my samsung clear view case so all good
Click to expand...
Click to collapse
But the skin is hidden now

This is my matt from slickwrap…bubbles shown haha but case also covered it so no point

hippo1n2 said:
This is my matt from slickwrap…bubbles shown haha but case also covered it so no point
Click to expand...
Click to collapse
The rainbow effect is because of matte or the case you're using it.

Slickwraps matte is awesome IMO
Note10+

The bottom is not covered? I'm using the official leather case. The bottom panel is exposed. I'm looking for a skin that covers it.

bkdodger said:
Slickwraps matte is awesome IMO
Note10+
Click to expand...
Click to collapse
Looks pretty dope man. Was it transparent or blue color?
And were u able to apply it easily without getting any bubbles... please suggest ...

gordec said:
The bottom is not covered? I'm using the official leather case. The bottom panel is exposed. I'm looking for a skin that covers it.
Click to expand...
Click to collapse
Only one I know has a bottom skin is Phantomskinz from what I’ve seen around ...
sharingspider said:
Looks pretty dope man. Was it transparent or blue color?
And were u able to apply it easily without getting any bubbles... please suggest ...
Click to expand...
Click to collapse
Thanks ..it’s a transparent matte which applied easier for me as I tried the gloss one prior to this install but messed it up ..no bubbles on this apply ..have to used that blow dryer to get it perfect [emoji1305] and settled in nicely
11 Max Pro

gordec said:
The bottom is not covered? I'm using the official leather case. The bottom panel is exposed. I'm looking for a skin that covers it.
Click to expand...
Click to collapse
Skinomi, covers back and top and bottom. Even the little section past the spen has a little cover and the spen itself for that matter. I use that with a nice case for pretty good protection!

I have used skinomi full body protector films, yes, they do the job, right, but, although somewhat it "repairs by itself", some marks, not scratches, never go away, I used an UAG plasma case in my note8, it has circular tpu cushions in the back, and those left circular marks, which never recovered

winol said:
I have used skinomi full body protector films, yes, they do the job, right, but, although somewhat it "repairs by itself", some marks, not scratches, never go away, I used an UAG plasma case in my note8, it has circular tpu cushions in the back, and those left circular marks, which never recovered
Click to expand...
Click to collapse
yeah i have that with the spigen logo left in the protector too but it is covered by a case and still protects phone so that doesn't bother me