Hi all, flashed S7 EDGE on U which is 10 the loader, and ceased at once to work that is the camera ( camera failed ) and flashlight is also not working. Put the camera even new and still not working, blinking flashlight works when uvedomlenie.
Not sure what uvedomlenie might be and when you say you [put the camera even new and still not working], I'm assuming that means you installed a new camera? If that is the case it might be a good idea to recheck connections. As I recall, the flex cable for the camera snaps in beneath the motherboard and may be prone to come loose if not careful. I don't think the firmware version flashed has anything to do with camera app issues. It sounds like hardware, and that would be the actual camera.
Related
Just yesterday I have not been able to access my rear camera, thought it was the rom i was using, flashed a new rom and the problem is still there.
When i open any kind of app that uses the rear camera such as snapchat - it can't connect to the camera
Instagram Force closes
Samsung camera app is just black
I have also used the secret codes to get into the testing hardware area and it reports
data line failed
then repeatedly says Warning camera failed
caches wiped factory reset everything and still no joy
I have taken apart the phone and have checked the ribbon cables and all were in and secure (100% sure)
so this leaves me with the only thing left. faulty module
I can only seem to find a replacement for a i9500,
so would this:
http://www.ebay.co.uk/itm/Genuin-Sa...ent-Part-/300932899978?_trksid=p2054897.l4275
work in my i9505?
thanks in advance
Most pieces work and I think both cameras too
Sent from my GT-I9505 using Tapatalk
Hello again
So i got a i9505 s4 dirt cheap (20euros), the screen was broken, last owner said it stopped working when he tried installing cyanogenmod.
I ordered new screen(original), installed stock rom and it got stuck in sview, i tried everything and nothing worked.
Next i tried rom called aosb (i don't remember if its the correct name, similar to cyanogenmod) it got me to home screen, for 15sec it worked great but then screen went black, phone was still going but everytime i tried to unlock it went black again.
Next i took phone apart, maybe i missed something or frogot to connect, but everything looked good. I googeled for possible problems and found that the proximity sensor(next to the top speaker) maybe broken, disconnected it and still same result. For testing purpose i disconnected front camera and phone worked, but only for 20min when the android tried to update gapps and then i was stuck at not able to unlock again.
Took phone apart third time, cleaned all the contacts etc, installed cyanogenmod and it works, but without front camera.
So my questions are
1. Has anyone ever seen anything like this?
2. Is there a way to use back camera without front one being connected? i can live without front camera
3. Why it goes to sview with stock rom?
Sorry for my english.
I hope somebody can help me.
Sir Tox said:
So my questions are
1. Has anyone ever seen anything like this?
2. Is there a way to use back camera without front one being connected? i can live without front camera
3. Why it goes to sview with stock rom?
Sorry for my english.
I hope somebody can help me.
Click to expand...
Click to collapse
Well try changing the ear piece module..its something in it maybe.. the proximity sensors are with the earpiece module..
1. Sview random appearances have been noted by many, there must be more to the mystery of this broken S4. A possible magnet sensor error..try disabling it via the xposed modules..anyhow.
2. Well you disconnect the font cam and everything works fine? Eh..never heard something like that..
3. Maybe because of a broken/weird magnetic sensor. As i said..
Plus are you sure without breaking rhe flex you removed and replaced and removed..
Your front cam not working could be because of a bad connection too..
Best is to try *#0*# in the phone menu and try testing the front cam and everything to check whether everything works fine
All the best
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
Hi,
I have a problem with both Cameras, both are not working and all camera apps show the Camera Busy note. I did the usual (restart, factory reset) nothing solved the problem. Any advice....,.
What does the it say when you open the camera app?
Camera busy please restart the phone.
When factory reset doesn't solve the problem, most probably hardware related issues
I'm having similar problems, including flash light not working as well, I've seen some disassemble videos and noticed that the flash is part of the back frame, so if you remove the back cover and push down, next to the word "camera", on top of the metallic antenna strip, the flashlight will start working and camera sometimes as well, so I've ordered a T4 and T3 screw driver and I'll see if any pins are not connected properly, maybe raise a bit of the pins of the motherboard, that touch the flash contacts on the back frame and see if it fixes it
Let me know if you are still having these issues, if not, how did you fix it.
So I got the phone open and it's very weird, without the back frame removed, the camera works always and when I put it on, it stops working, so I thought that something was shorting some circuit, tried to isolate all contacts from the back frame, antennas and everything just to see it would still happen and it does, so it does not seem to be shorting anything, just the pressure of the cover seems to disable the camera, so what I did for now was add some plastic (old SIM card cut into peaces ), put it between the SIM tray and back frame and all working fine now. It's a temp fix, but it's a fix =D
Hope this can help someone with the same issue.
One more update, what I did on the above post, was only temporary, after a day, it started happening again, no camera, so went back in again, turns out this issue was being cause by the front facing camera, when I removed it, the main camera started working straight away. Now all is good, just no front facing camera which I don't really care for =P but if anyone knows where I can get one, there is a guy on eBay selling one, but £16 seems a bit much, if anyone knows where I can get a front facing camera for the Moto X Play, please let me know.
you solved it?
I successfully revived my phone after a brick - had to take it apart at that. I disconnected the camera module when doing so. After finishing and reassembling it, I noticed that the photos from the back camera were no more than 3 or 4 megapixels. i thought it was badly connected or something (which seemed odd since it still shot somewhat nice pictures, i would expect artifacts) and went ahead and took the device apart, then unplugged and replugged both cameras. After booting, I opened the default camera app. The rear camera snapped into place with OIS but the app didn't show image. Tried switching to the front cam, nothing. After some time it simply crashed. OpenCamera says it can't start it and it might be in use by other app (after closing the stock camera).
Now I connected it again after that and it still doesn't want to work. I might've damaged something, which is kinda unlikely since it worked worse, but still worked after the first teardown.
Maybe it is a software issue? There's some camera firmware I've heard of, might be that too. Or I just trashed the cam, possible too. But what's weird is that the front camera also doesn't work...
Edit: it was the BeastMode kernel... Says it is made for A2017U's and my thing is a G
Lol it was BeastMode Kernel. Thanks for all the help
Hello Team,
I've had my Essential Ph-1 for several years and loved it. Recently I replaced the battery with no issues. However, I notice that since replacing the battery, the stock camera app would not launch with an error initializing the camera, and it said to restart the phone. Rebooting the phone made no difference.
I opened the device back up and carefully checked all the wires and connections, and they're all tight and nothing looks cut, cracked, or disconnected. I tried a third party camera app (OpenCamera), and it worked fine on the front facing camera, but the rear camera was in black and white only. Since then I have tried factory resetting and re-flashing the firmware, and now the front camera works (in third party app) but the rear camera is not even recognized and I don't get an option to swap cameras.
Any suggestions? Is there anything I can check to troubleshoot this further?
TIA!
jbstanford said:
Hello Team,
I've had my Essential Ph-1 for several years and loved it. Recently I replaced the battery with no issues. However, I notice that since replacing the battery, the stock camera app would not launch with an error initializing the camera, and it said to restart the phone. Rebooting the phone made no difference.
I opened the device back up and carefully checked all the wires and connections, and they're all tight and nothing looks cut, cracked, or disconnected. I tried a third party camera app (OpenCamera), and it worked fine on the front facing camera, but the rear camera was in black and white only. Since then I have tried factory resetting and re-flashing the firmware, and now the front camera works (in third party app) but the rear camera is not even recognized and I don't get an option to swap cameras.
Any suggestions? Is there anything I can check to troubleshoot this further?
TIA!
Click to expand...
Click to collapse
As it's happened at the same time as battery replacement you'd have to think the two are related. Possible try a "simulated battery pull" to ensure camera is powered down, that is a force restart, press power button & vol driven together for 15secs (I think). If this doesn't work try disconnect/reconnect any components related to camera. Only other thing I can think of is the camera or related component has received ESD damage form static electricity (most likely a diode or small IC), maybe you can find a cheap bricked or damaged phone for spares, if camera module expensive, assuming it's the camera.
Appreciate the response. I think you're right. I've forced restarted and flashed it back to stock, and while the stock camera doesn't work, I found that if I use a third party app (such as OpenCamera) the rear camera works in Greyscale only (not in Color).
IronRoo said:
As it's happened at the same time as battery replacement you'd have to think the two are related. Possible try a "simulated battery pull" to ensure camera is powered down, that is a force restart, press power button & vol driven together for 15secs (I think). If this doesn't work try disconnect/reconnect any components related to camera. Only other thing I can think of is the camera or related component has received ESD damage form static electricity (most likely a diode or small IC), maybe you can find a cheap bricked or damaged phone for spares, if camera module expensive, assuming it's the camera.
Click to expand...
Click to collapse
jbstanford said:
Appreciate the response. I think you're right. I've forced restarted and flashed it back to stock, and while the stock camera doesn't work, I found that if I use a third party app (such as OpenCamera) the rear camera works in Greyscale only (not in Color).
Click to expand...
Click to collapse
hummmm ... Yes, hard to say for sure boat seems like some hardware issue on the color camera, hope you can find a simple fix.
Appreciate the followup. After looking farther. I see there is a hairline crack in the camera. I bought a parts EssentialPH1 off of eBay for ~$50 and will give swapping them a shot.
jbstanford said:
Appreciate the followup. After looking farther. I see there is a hairline crack in the camera. I bought a parts EssentialPH1 off of eBay for ~$50 and will give swapping them a shot.
Click to expand...
Click to collapse
that would likely explain it, hope you fix it easily (see the video on youtube from Fixeze & ifixit if you haven't already