Related
Okay heres what happened: I was attempting to flash a ROM. After making a new backup and flashing that new ROM the device would not boot. So like any normal person would do I then went back into recovery and attempted to restore my backup. Upon restoring the backup, halfway through the device just decides to reboot and boot into the ROM (which was a half restored backup). I tried to boot back into recovery and start the process over however now the device will not boot into the recovery at all. It continues to loop the bootloader logo over and over. Is this a soft brick? Either way, all I want at this point is to be able to restore that backup so I can atleast have it working again. All help is much appreciated.
EDIT: okay i managed to get the recovery loaded, what i may end up doing is loading a saved ROM up and starting from scratch there (TWRP continues to Stop my restore halfway through and reboot the recovery --very frustrating tbh). My question then however would be is there a way to get my data back from my backup once I start fresh? Does tibu allow this or something comparable? I really don't want to lose all that data. Thanks again.
Edit 2: managed to fully resolve issue. delete if neccessary.
HarmonyFlame said:
Okay heres what happened: I was attempting to flash a ROM. After making a new backup and flashing that new ROM the device would not boot. So like any normal person would do I then went back into recovery and attempted to restore my backup. Upon restoring the backup, halfway through the device just decides to reboot and boot into the ROM (which was a half restored backup). I tried to boot back into recovery and start the process over however now the device will not boot into the recovery at all. It continues to loop the bootloader logo over and over. Is this a soft brick? Either way, all I want at this point is to be able to restore that backup so I can atleast have it working again. All help is much appreciated.
EDIT: okay i managed to get the recovery loaded, what i may end up doing is loading a saved ROM up and starting from scratch there (TWRP continues to Stop my restore halfway through and reboot the recovery --very frustrating tbh). My question then however would be is there a way to get my data back from my backup once I start fresh? Does tibu allow this or something comparable? I really don't want to lose all that data. Thanks again.
Edit 2: managed to fully resolve issue. delete if neccessary.
Click to expand...
Click to collapse
How did you get back into recovery? I had paranoid android flashed and i did a factory reset like an idiot. Now i cant boot into recovery - "teamwin" logo freezes and reboots into a continuous loop. I can get into the bootloader but nothing works?
sashennaidoo1 said:
How did you get back into recovery? I had paranoid android flashed and i did a factory reset like an idiot. Now i cant boot into recovery - "teamwin" logo freezes and reboots into a continuous loop. I can get into the bootloader but nothing works?
Click to expand...
Click to collapse
I'll tell you what I literally did.
When the device was bootlooping the teamwin logo, I booted into fastboot and powered my device completely off. I then waited an hour as I was a little tired with what was happening to take care of something. After that hour I turned it on and it suddenly booted into teamwin recovery. That's exactly all I did. So what I would do is turn the device off for a little bit then try to see if it boots the recovery. If not you will likely have to use the nexus 10 toolkit to reflash the recovery.
Hope that helps.
HarmonyFlame said:
I'll tell you what I literally did.
When the device was bootlooping the teamwin logo, I booted into fastboot and powered my device completely off. I then waited an hour as I was a little tired with what was happening to take care of something. After that hour I turned it on and it suddenly booted into teamwin recovery. That's exactly all I did. So what I would do is turn the device off for a little bit then try to see if it boots the recovery. If not you will likely have to use the nexus 10 toolkit to reflash the recovery.
Hope that helps.
Click to expand...
Click to collapse
Thanks mate! really appreciate it! I have no clue what i did but on one of the reboots, it booted into TWRP and i re-flashed the paranoid android rom and gapps and it worked.
Thanks for above response. Much appreciated!
Just for future reference, both TiBU and ROM Toolbox will restore from a Nandroid backup.
Sent from my Nexus 10 using Tapatalk HD
bruce7373 said:
Just for future reference, both TiBU and ROM Toolbox will restore from a Nandroid backup.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
So I am in this same boat and will probably have to use some toolkit since I have not been able to boot up TWRP. I know I am on 2.4.4.0 or something for TWRP, not 2.5 but would CWM be a better choice since I have run into this now a couple of times? This is the first where it hasn't stopped the recovery boot loop.
It first started this morning when my phone suddenly started rebooting while I was using it. Then I thought it as a ROM issue and flashed a new ROM over it. Everytime I try to flash something on system. TWRP Hangs and the phone restarts itself.
Tried repairing data, system partitions from TWRP, same thing happens. Bootloops when I try to repair data partition
Tried restoring nandroid backup. When it says flashing data, TWRP freezes and the phone starts bootlooping.
Can anyone help?
I have tried doing the EFS flash via adb from PC.
I'm stuck with the exact same problem since months.
CallMeAldy said:
I'm stuck with the exact same problem since months.
Click to expand...
Click to collapse
No luck?
Have you tried Claiming Warranty?
try doing a re flash of recovery, because your issue will be to get your recovery working properly or else you cant remount anything else.
StarRavier said:
try doing a re flash of recovery, because your issue will be to get your recovery working properly or else you cant remount anything else.
Click to expand...
Click to collapse
I flashed TWRP 3.0.2,3.0.2-2,3.0.2-3
Loads of it. Tried doing full stock + unroot from Nexus toolkit. That usually fixed all my problems Everytime I was in dire problems like this.
TJ_bab said:
I flashed TWRP 3.0.2,3.0.2-2,3.0.2-3
Loads of it. Tried doing full stock + unroot from Nexus toolkit. That usually fixed all my problems Everytime I was in dire problems like this.
Click to expand...
Click to collapse
I've never used that toolkit. Since day 1, ive used skipsoft android toolkit. just keep on trying. Does it crash at all when doing backups?
StarRavier said:
I've never used that toolkit. Since day 1, ive used skipsoft android toolkit. just keep on trying. Does it crash at all when doing backups?
Click to expand...
Click to collapse
Doesn't crash during backup but crashes during restore.
TJ_bab said:
Doesn't crash during backup but crashes during restore.
Click to expand...
Click to collapse
Well in your case what I would do is a backup,
Then wipe, flash custom rom. Use phone til reboot.
If reboot, flash stock IMG. Use till reboot
If still rebooting, then come back. I guess I never asked.what rom.your using
StarRavier said:
Well in your case what I would do is a backup,
Then wipe, flash custom rom. Use phone til reboot.
If reboot, flash stock IMG. Use till reboot
If still rebooting, then come back. I guess I never asked.what rom.your using
Click to expand...
Click to collapse
it doesn't boot at all.
It bootloops
I have the exact same problem. Last week upgraded to 7.0, root, stock room, viper4arise audio and EX kernel and that's it. while taking pictures it froze then that boot loop, somehow I managed through a combination of flashing factory image through fastboot, locking, unlocking, reflahsing, to get it to boot normally, then yesterday I was taking pictures again and it refroze then bootloops. Now I am able to fastboot factory images but it doesn't get me out of the bootloops, and in TRWP same as you, I cannot flash anything on data or system. Repairing the file system doesn'T change anything, I did like on other threads also and flashed factury, restored nandroid then flash factory but the restore on TRWP always hangs up.
I was wondering if there is someone knowing the adb dd commands to impose the raw copying back of the restore ? Maybe that would work.
Did you try wiping system under wipe > advanced in TWRP?
In twrp, can you open a terminal and check the results of this (basically, doing a full read-only test of your flash)
Code:
dd if=/dev/block/mmcblk0 of=/dev/null
So i just did the new update on my V20 and it sent me straight to TWRP and i cant get out of it. It always boots into TWRP. What can i do? ive already tried a factory reset and restoring my back up and nada. Help please.
Its now looking for stock boot image which on yours is currently modified with system rooted.
Try using lgbridge to repairs your boot image or if you have it flash the stock boot image using fast boot command or do a factory reset while in twrp then flash entire stock image with lgbridge.
Sent from my LG-H990 using XDA-Developers Legacy app
somemadcaaant said:
Its now looking for stock boot image which on yours is currently modified with system rooted.
Try using lgbridge to repairs your boot image or if you have it flash the stock boot image using fast boot command or do a factory while in twrp then flash entire stock image with lgbridge.
Sent from my LG-H990 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yeah none of those work. The OS is setting off some sort of flag that states it must go into recovery and wont stop going into recovery until that flag is changed which I assume is done by the update. I tried updating with UPPERCUT/LGUP and it errors out at 4%. So right now it's still stuck
It didnt install the update
type
Code:
fastboot erase fota
from bootloader and see if it boots after that.
This will for sure fix you up...
https://forum.xda-developers.com/v20/how-to/how-fixed-bricked-lg-v20-t3501310
listen to me2151
delete fota and then pull battery and reboot.
ota's downloaded to the fota folder will cause endless twrp loop.
freeze ota in system/privapps to avoid this again.
Sorry to post on here, but maybe we can get a few tips from each other.
Im also stuck at TWRP. I installed a ROM and went back and forth between both ROMS. After about 4 times of going back and forth between ROMS, my pattern didn't recognize on boot with my original backup and daily. I tried my pattern over 10 times and it wiped everything on me. The strange part was I was swiping my pattern 100% and it failed. Also, my tries were going up and down. It would say I have 6 tries left before my phone wipes, then I would stop anjd turn the screen off, and the screen would say I have 3 tries left, then 5 tries left. My tries were inconsistent, and it finally wiped everything.
I am now stuck on TWRP with no luck of restoring. I flashed the vs995 boot image and system image and it goes back to TWRP. I factory reset, wiped everything, made sure the system folder was clean, then flashed both images again and the same thing, no luck.
I also tried to restore with LGUP, but keeps stopping at 9%. I extracted the dll and copied it into the common folder and I get the same thing.
Error: Error Code = 0x2000, Flashing Fail
When I plug the phone into my computer it shows us996 and not vs995. Strange.
Any help would be amazing.
EDIT: Figured it out!
So, I extracted the dll file from the kdz file and I had to replace it with the one in the common folder. My error was not renaming the file, so the LGUP would stop at 9%. Make sure you pull the file, rename it, remove the old file from the folder, and flash on LGUP.
leyvatron said:
Sorry to post on here, but maybe we can get a few tips from each other.
Im also stuck at TWRP. I installed a ROM and went back and forth between both ROMS. After about 4 times of going back and forth between ROMS, my pattern didn't recognize on boot with my original backup and daily. I tried my pattern over 10 times and it wiped everything on me. The strange part was I was swiping my pattern 100% and it failed. Also, my tries were going up and down. It would say I have 6 tries left before my phone wipes, then I would stop anjd turn the screen off, and the screen would say I have 3 tries left, then 5 tries left. My tries were inconsistent, and it finally wiped everything.
I am now stuck on TWRP with no luck of restoring. I flashed the vs995 boot image and system image and it goes back to TWRP. I factory reset, wiped everything, made sure the system folder was clean, then flashed both images again and the same thing, no luck.
I also tried to restore with LGUP, but keeps stopping at 9%. I extracted the dll and copied it into the common folder and I get the same thing.
Error: Error Code = 0x2000, Flashing Fail
When I plug the phone into my computer it shows us996 and not vs995. Strange.
Any help would be amazing.
Click to expand...
Click to collapse
why dont you try flash custom rom?
rowihel2012 said:
why dont you try flash custom rom?
Click to expand...
Click to collapse
Tried and no luck. Stuck in TWRP.
akobirovruslan said:
So i just did the new update on my V20 and it sent me straight to TWRP and i cant get out of it. It always boots into TWRP. What can i do? ive already tried a factory reset and restoring my back up and nada. Help please.
Click to expand...
Click to collapse
Have you tried booting into twrp manually and reflashing twrp again? Try that
THIS WILL FIX YOUR TWRP BOOTLOOP. Tried and true. Follow step-by-step.
https://forum.xda-developers.com/v20/how-to/how-fixed-bricked-lg-v20-t3501310
i did this it worked https://forum.xda-developers.com/v20/help/lg-v20-access-to-fastboot-t3557328
Hi,
I unlocked the bootloader of my H870, installed TWRP 3.1.1.0 and SUPERSU. Everything was working great untill I decided to restore my system defaults to make a fresh start with my G6. After choosing the option to restore system defaults, my phone rebooted and it booted into TWRP. I rebooted my phone and it kept doing this all the time.
I decided to look for a stock ROM and flash that ROM.
I succesfully flashed the "LG-H87010f-Flashable.COMPLETE.zip" ROM (from autoprime's post) trough TWRP. But this did not work. I even wiped all the data from my phone (even system) and flashed the ROM again; still nothing.
Before having this issue, I had the same Baseband version, Kernel version, Build number. Only the dates and the Software Version are different.
I had the V10b-EUR-XX Software Version installed on my phone. I see this is the 10f version. I guess this should not be a problem right?
After this I took these steps solve this issue:
1. Downloaded new LG Mobile Drivers (LGMobileDriver_WHQL_Ver_4.2.0)
2. Downloaded and installed LGUP. LGUP doesnt recognize my phone as a LG G6 and this method did not work for that reason.
Fastboot mode is working on my phone; I can reboot my phone trough the commandline on my PC and things like that . However, my PC is not recognizing my phone as a LG G6 device in Fastboot mode.
My PC recognices my phone as a H870 when in TWRP. In Fastboot mode it recognices my phone as Android Device.
3. Installed LG Bridge for more drivers; did not work either
4. Downloaded Uppercut, but it doenst work without LGUP.
4. Looked all over the internet to find a Stock ROM in .zip or .img format; found nothing
5. Downloaded WindowsLGFirmwareExtract-1.2.6.1 and tried to extract the H87010d_00_OPEN_EU_OP_0327.kdz file. I extracted it into .bin files, but they were not usable. After that, I combined these .bin files into a system.img file. But that .img file was bigger then 5 GB and for that reason it was not usable to flash trough Fastboot or TWRP.
7. Looked for other methods to obtain a H870 Stock Rom, including another extraction method, but I cant figure out how to do this.
I have spend countless hours on this problem, but I cant find an usable H870 stock rom to flash my phone with.
Is there someone that can help me out with this problem? Im willing to donate some € if someone helps me to get my phone working again.
Really hoping for a kind person to help me out and provide me solution for this issue.
Thanks in advance
Try formating data in TWRP(not factory reset) then flash the 10f complete zip. Trying to perform a factory reset from within Android could have possibly messed up your data (due to TWRP being installed instead of stock recovery) so a full data format is needed.
Lgup most likely doesn't detect the phone because you wiped system. But flashing the complete zip should have restored system.
In the future make backups in TWRP to restore later.. or flash a kdz with lg bridge or lgup without wiping system first.
autoprime said:
Try formating data in TWRP(not factory reset) then flash the 10f complete zip. Trying to perform a factory reset from within Android could have possibly messed up your data (due to TWRP being installed instead of stock recovery) so a full data format is needed.
Lgup most likely doesn't detect the phone because you wiped system. But flashing the complete zip should have restored system.
In the future make backups in TWRP to restore later.. or flash a kdz with lg bridge or lgup without wiping system first.
Click to expand...
Click to collapse
Thanks for your reply. I have already formatted data in TWRP, but im still having this problem . It seems like something is preventing my device from starting up. I have flashed several ROMS on other devices, but never experienced something like this. Is there something else I can try? Can I flash the stock recovery and flash the stock ROM? I got the feeling TWRP is causing this issue.
If its possible to flash stock recovery, where can I find it?
RoyalD said:
Thanks for your reply. I have already formatted data in TWRP, but im still having this problem . It seems like something is preventing my device from starting up. I have flashed several ROMS on other devices, but never experienced something like this. Is there something else I can try? Can I flash the stock recovery and flash the stock ROM? I got the feeling TWRP is causing this issue.
If its possible to flash stock recovery, where can I find it?
Click to expand...
Click to collapse
Flash the complete zip then boot into download mode and flash kdz. Lgup should see the device as a g6 now instead of unknown device. If lgup isn't seeing any device at all (including unknown device) then your setup is off.. missing drivers or something. If that doesn't work.. idk.
RoyalD said:
Thanks for your reply. I have already formatted data in TWRP, but im still having this problem . It seems like something is preventing my device from starting up. I have flashed several ROMS on other devices, but never experienced something like this. Is there something else I can try? Can I flash the stock recovery and flash the stock ROM? I got the feeling TWRP is causing this issue.
If its possible to flash stock recovery, where can I find it?
Click to expand...
Click to collapse
autoprime said:
Try formating data in TWRP(not factory reset) then flash the 10f complete zip. Trying to perform a factory reset from within Android could have possibly messed up your data (due to TWRP being installed instead of stock recovery) so a full data format is needed.
Lgup most likely doesn't detect the phone because you wiped system. But flashing the complete zip should have restored system.
In the future make backups in TWRP to restore later.. or flash a kdz with lg bridge or lgup without wiping system first.
Click to expand...
Click to collapse
Don't factory reset using the in phone option. You can only do this through twrp's option. To fix this you'll need to boot through the hard side, using power and volume down until the lg logo appears then release power for 1 sec and then repress keeping volume down pressed. Confirm yes twice on the white screens to get to twrp. Once in twrp then reset again and reflash the system. Then using twrps img installer flash your twrp img(make sure it is on ext sd) again. Then reboot.
Swizzle82 said:
Don't factory reset using the in phone option. You can only do this through twrp's option. To fix this you'll need to boot through the hard side, using power and volume down until the lg logo appears then release power for 1 sec and then repress keeping volume down pressed. Confirm yes twice on the white screens to get to twrp. Once in twrp then reset again and reflash the system. Then using twrps img installer flash your twrp img(make sure it is on ext sd) again. Then reboot.
Click to expand...
Click to collapse
Ohhh F*** YEAHH!!! :victory: Booting the "hard side" fixed the problem!! It was the first thing I tried this morning. I just booted this way and rebooted my phone without resetting or flashing anything. Im so damn happy lol. I still dont understand what happened and why my device was actling like this. But I learned a hard lesson; backup, backup and once again: BACKUP. And dont Factory reset in Android!
Thanks a lot for your help guys! I really apreciate it! :victory::victory:
autoprime said:
Flash the complete zip then boot into download mode and flash kdz. Lgup should see the device as a g6 now instead of unknown device. If lgup isn't seeing any device at all (including unknown device) then your setup is off.. missing drivers or something. If that doesn't work.. idk.
Click to expand...
Click to collapse
Thanks a lot for taking your time to help me out. The combination of your ROM/tips and Swizzle82's tip made me fix my phone. You're the man! :victory:
RoyalD said:
Thanks for your reply. I have already formatted data in TWRP, but im still having this problem . It seems like something is preventing my device from starting up. I have flashed several ROMS on other devices, but never experienced something like this. Is there something else I can try? Can I flash the stock recovery and flash the stock ROM? I got the feeling TWRP is causing this issue.
If its possible to flash stock recovery, where can I find it?
Click to expand...
Click to collapse
RoyalD said:
Ohhh F*** YEAHH!!! :victory: Booting the "hard side" fixed the problem!! It was the first thing I tried this morning. I just booted this way and rebooted my phone without resetting or flashing anything. Im so damn happy lol. I still dont understand what happened and why my device was actling like this. But I learned a hard lesson; backup, backup and once again: BACKUP. And dont Factory reset in Android!
Thanks a lot for your help guys! I really apreciate it! :victory::victory:
Click to expand...
Click to collapse
Probably because you already did all the flashing prior to. Glad it worked. This happened when I first got my V20 and was stoned not thinking. I reset using the in phone option and it caused twrp bootloop. I too learned the hard way.
Had the same issue, fixed it, thanks.
My phone kept doing this booting into recovery no mattery what ROM I installed.
I got into twrp by holding volume down and selecting yes on next 2 white screens....but now this message appears all the time.
please can someone help??
Here is message:
"Encryption Unsuccessful
The password you entered is correct, but unfortunately your data is corrupt.
To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset , you'll have an opportunity to restore any data that was backed up to your Google Account."
Matt.
matthew33 said:
My phone kept doing this booting into recovery no mattery what ROM I installed.
I got into twrp by holding volume down and selecting yes on next 2 white screens....but now this message appears all the time.
please can someone help??
Here is message:
"Encryption Unsuccessful
The password you entered is correct, but unfortunately your data is corrupt.
To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset , you'll have an opportunity to restore any data that was backed up to your Google Account."
Matt.
Click to expand...
Click to collapse
Flash a firmware trough LGUp, or flash again the last TWRP available trough fastboot.
RoyalD said:
Thanks a lot for taking your time to help me out. The combination of your ROM/tips and Swizzle82's tip made me fix my phone. You're the man! :victory:
Click to expand...
Click to collapse
Please help, i have the same problem and nothing, what exactly is a boot to the hard side? I ve tried to power off the phone, press vol down and power, realase power 1 sec, press again...but nothing...still boot on twrp...
Well, I finally solved it with lgup and uppercut... what a nightmare.
matthew33 said:
My phone kept doing this booting into recovery no mattery what ROM I installed.
I got into twrp by holding volume down and selecting yes on next 2 white screens....but now this message appears all the time.
please can someone help??
Here is message:
"Encryption Unsuccessful
The password you entered is correct, but unfortunately your data is corrupt.
To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset , you'll have an opportunity to restore any data that was backed up to your Google Account."
Matt.
Click to expand...
Click to collapse
Flash stocl .kdz with uppercut and lg up
Saved my G6!
Swizzle82 said:
Don't factory reset using the in phone option. You can only do this through twrp's option. To fix this you'll need to boot through the hard side, using power and volume down until the lg logo appears then release power for 1 sec and then repress keeping volume down pressed. Confirm yes twice on the white screens to get to twrp. Once in twrp then reset again and reflash the system. Then using twrps img installer flash your twrp img(make sure it is on ext sd) again. Then reboot.
Click to expand...
Click to collapse
Great tip @Swizzle82! It allowed me to restore my LG G6 after bootloop. It had not been detected by PC, and this hardware reset helped!
Hi, all
If I understand, and to sum up :
I rooted my LG-G6 few weeks ago, and intall TWRP. When OTA wants to install official update, the reboot stops in TWRP mod, so ... failed :-/
Is the solution to flash through Uppercut/LGUP with a .kdz file, without risk of brick the phone ?
Thx
So I installed TWRP recovery using tuliptool and all that, but didn't bother with bootloader unlocking since it said it's not needed. So I tried to install Magisk using the instructions on their thread but after booting it asks me to reset my phone because the data got corrupted.
Luckily I had backed everything up beforehand, so I restored boot image and everything works fine again. Just wanted to know what I did wrong here. Did I miss any steps?
auxillium said:
So I installed TWRP recovery using tuliptool and all that, but didn't bother with bootloader unlocking since it said it's not needed. So I tried to install Magisk using the instructions on their thread but after booting it asks me to reset my phone because the data got corrupted.
Luckily I had backed everything up beforehand, so I restored boot image and everything works fine again. Just wanted to know what I did wrong here. Did I miss any steps?
Click to expand...
Click to collapse
You probably didn't miss anything if it's the "Your device is corrupt. It can’t be trusted and may not work properly” error, I get the same thing. You messed with the files in the boot partition so ZTE's "safety" features in the stock ROM automatically call them corrupted. I simply hit the power button and continue to boot, my device works fine (actually much better than before being rooted with Magisk). I'm the one who "corrupted" the phone on purpose, so I'm comfortable it's fine. If you're getting another message, I'm not entirely sure why. Maybe try ADB sideloading Magisk in TWRP, it's what "worked" for me.
marvelljones said:
You probably didn't miss anything if it's the "Your device is corrupt. It can’t be trusted and may not work properly” error, I get the same thing. You messed with the files in the boot partition so ZTE's "safety" features in the stock ROM automatically call them corrupted. I simply hit the power button and continue to boot, my device works fine (actually much better than before being rooted with Magisk). I'm the one who "corrupted" the phone on purpose, so I'm comfortable it's fine. If you're getting another message, I'm not entirely sure why. Maybe try ADB sideloading Magisk in TWRP, it's what "worked" for me.
Click to expand...
Click to collapse
What do you mean by "hitting the power button and continue to boot"? When I hit the power button on the "Decryption unsuccessful" screen it just locks and unlocks like normal, but stays there.
Ok I managed to install Magisk after factory reset, but after that my sdcard is not being recognized anymore (but is recognizable in TWRP). So I decided to restore the backup i had, and rebooted. But now I'm stuck on the ZTE logo during boot. I can still open TWRP, though. I've tried wiping system, data, and cache, then restoring the backup, also no good. For now I'm downloading the stock firmware and will try that. Any ideas on how I can fix this before I flash the stock firmware?
EDIT: Ok I managed to fix it by installing the no verity boot image instead. Boots again. I'll probably refrain from trying to root for now. Thanks for the help.
auxillium said:
Ok I managed to install Magisk after factory reset, but after that my sdcard is not being recognized anymore (but is recognizable in TWRP). So I decided to restore the backup i had, and rebooted. But now I'm stuck on the ZTE logo during boot. I can still open TWRP, though. I've tried wiping system, data, and cache, then restoring the backup, also no good. For now I'm downloading the stock firmware and will try that. Any ideas on how I can fix this before I flash the stock firmware?
EDIT: Ok I managed to fix it by installing the no verity boot image instead. Boots again. I'll probably refrain from trying to root for now. Thanks for the help.
Click to expand...
Click to collapse
Well, I wasn't much help, but it sounds like your overall problem was different than mine. My only advice is if you attempt to root with Magisk again, is to connect to your PC/Mac/etc with a cable, use the Advanced menu in TWRP, choose ADB sideload, and sideload Magisk from your PC/Mac/etc. You can find a more advanced explanations on various websites how to use ADB if you don't already know how. For some reason that worked for me and gave me full Magisk and phone functionality when nothing else did.
marvelljones said:
Well, I wasn't much help, but it sounds like your overall problem was different than mine. My only advice is if you attempt to root with Magisk again, is to connect to your PC/Mac/etc with a cable, use the Advanced menu in TWRP, choose ADB sideload, and sideload Magisk from your PC/Mac/etc. You can find a more advanced explanations on various websites how to use ADB if you don't already know how. For some reason that worked for me and gave me full Magisk and phone functionality when nothing else did.
Click to expand...
Click to collapse
Will this allow me to install magisk without a factory reset?
auxillium said:
Will this allow me to install magisk without a factory reset?
Click to expand...
Click to collapse
I didn't have to, but I can't guarantee it will work for you. I had previously factory reset my phone but at the time I sideloaded Magisk I had been using the phone for at least a week. Just make a backup of everything first to be safe. *edit* I am using the beta version of Magisk (16.4), not sure if that's making a difference.