Hi Guys.
I just tried to root my Samsung Galaxy S8 SM-G950F. I followed this tutorial: https://www.skyneel.com/root-samsung-galaxy-s8-sm-g950f
So everything looked fine, Odin gave me a "PASS" and I disconnected the phone. Phone restarted and started installing CF SuperSu.
After next restart, it said "Unable to restart your device. The integrity verification has failed. You need to reset your device to factory default settings. This will erase all your data"
After pushing the Erase the phone is not restarting/looping multiple times and is going to "Erase"
One time it stopped looping and just got stuck on "Erasing" for an hour so I thought I should try restarting it again, after restarting its just looping again.
I checked out this https://forums.oneplus.com/threads/stuck-on-erasing-while-doing-factory-reset.441143/page-2 where they tell to just wait after its stuck?
Please assist me.
EDIT:
I have now been able to install TWRP, will try to install stock ROM and then root it. Does anyone have a quick guide on this?
EDIT2:
Finally! Got it back to stock state again with Odin. Will give it a second try to root it. Anyone has any root to recommend?
EDIT3:
So i was able to install TWRP again after flashed to stock, and the installed Magisk. So everything is working fine, Hence close / delete thread.
Related
Hi,
I really am in a hurry. Using this phone for work as well as personal.
My phone is SM-N910C. Had 5.1.1 COI4 installed, rooted with cf-auto-root through Odin and after checking everything was ok setting SeLinux to permissive with the app found in this forum. Installed latest TWRP and flashed this with it (zip on first post) http://forum.xda-developers.com/lg-g2/general/guide-how-to-make-viper4android-lollipop-t3075794
Phone got stuck on Android is starting... Starting apps. After 20 minutes or so, wiped everything on the phone through Advanced wipe on TWPR. Phone doesn't restart, stuck on initial Note4 white letters (no Samsung splash screen) and recovery doesn't work.
Download (volume down etc) works. Tried to flash the COI4 again through ODIN but it fails all the time. Phone says sw rev. check fail device 2 binary 1... and now everytime I connect the USB phone gets stuck at a grey battery charging icon, even when I unplug it.
What can I do?
THANKS!
Got it! It was because phone installed an OTA update thus blocking bootloader to lesser versions. Updated to COJ5 and everything is fine.
Hello guys,
I need extremely technical help as no longer know what to do.
I have a Galaxy S7 Edge device, which installed the rom BobCat and everything went well until then.
Later I decided to install another rom to test KingRom that left me unsatisfied, because I thought it had some bugs. Had the TWRP 3.0.0 recovery and decided to upgrade to 3.0.2, everything went well.
At one point I do not remember when or how if was when install back, downgrade to TWRP3.0.0, I do not remember if it was via Odin or TWRP, it happens that the installation stopped halfway. Then unplug the device, restarted in recovery mode and got the following message "E: falied to mount EFS (Invalid Argumen)", I could not restart the device (Boot Loop, and stucked at Samsung Logo) except in Recovery Mode, which also made to stay without IMEI number and Serial Number.
I googled until I came to this tutorial:
http://forum.xda-developers.com/s7-e...ssues-t3379516
I followed all the steps explained, I back up EFS_backup and RADIO_bakcup partitions.
Installed FACTORY BINARY G935, everything went well. After restarted, already had the correct IMEI number but still did not present the S / N.
After all that, i tried to install Stock Firmware via Odin, from here started the problems that could not solve.
In the first attempt Odin stucked in "System" (also used the PIT file with the same CSC ... .i do not know if I was right using PIT?). Restarted the device forcibly, entered the stock Recovery, did a complete wipe and always get this message "E: falied to mount System (Invalid argument), I returned to install Factory Binary, then reboot in Recovery and the same message no longer appeared.
Again I try to install the Stock Firmware and Odin always stucks in System, or NAND writing, or Partition, etc. I've tried various Stock Firmware, with and without PIT files, always without success.
Only Factory Binary that successfully installs. The TWRP via Odin also but when device restarts to enter Recovery Mode always get the message at the top of the display:
"Recovery image signature check Fail"
"Reboot to avoid Warranty bit set."
1. Does the partitions are in good shape? how can I check it?
2- I did good or bad using PIT file?
3- Does the problem is running Windows XP through a Virtual Machine?
4 What else can I do?
In all actions used and am using a Macbook 4.1, OsX Lion 10.7.5, Odin 3.11 Windows XP Professional 32bit through Oracle VM VirtualBox 3.4.38
Device:
Galaxy S7 Edge (SM-G935F) CSC = SWC SwissCom
1st Original Firmware: (I guess was 1?) G935FXXS1APG5_G935FVFG1APF3_SWC
Need help Please
Thank you so very much!
Hi,
I recently got me a Galaxy S5 (SM-G900F) and the first thing i wanted to do was installing CM13 as I always do with my new phones. However, when i followed te steps on CM wiki using Heimdall to flash TWRP the blue bar of the downlaod mode increases a small bit, then stops and in the command promt it says something about error with finding PIT. After trying this for three times i decided to go with Odin, which I do prefer anyways.
I tried flashing TWRP , the blue bar is filling to 100% but then on the little screen where Odin usually states FAIL! or PASS! it just says RESET! and my phone is restarting. Shortly after it restarded you can see the RESET! turning to PASS!, but when I tried checking in TWRP is installed, it wasn't. I tried it again and then Odin suddenly says FAIL! After restarting my phone it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I couldnt even enter download mode anymore till I tried if getting out the battery would work. I could enter download mode again and flashed the same TWRP on my phone again, and aigain it says RESET! but after that my phone worked again. I tried flashing with another version of Odin and TWRP but same thing happened - First run it said RESET!, second run FAIL!.
I thought maybe rooting the device and installing TWRP via their app afterwards could do the trick. So i tried flashing Autoroot with Odin but it made my phone showing a screen with Samsung logo and in the upper left corner something about recovery mode, seemed to be a loop/freeze. So i took out the battery again and flashed TWRP and that solved the problem again. At last I tried rooting by using TowelRoot but it says the service is not available for my device, even though S5 is listed as a supported device.
I really have no idea what to do anymore, would be very grateful if someone could come up with a solution.
BTW: Is it possible to flash CM13 without using custom recovery by using stock recovery?
Greetings
Khalitas
Khalitas said:
Hi,
I recently got me a Galaxy S5 (SM-G900F) and the first thing i wanted to do was installing CM13 as I always do with my new phones. However, when i followed te steps on CM wiki using Heimdall to flash TWRP the blue bar of the downlaod mode increases a small bit, then stops and in the command promt it says something about error with finding PIT. After trying this for three times i decided to go with Odin, which I do prefer anyways.
I tried flashing TWRP , the blue bar is filling to 100% but then on the little screen where Odin usually states FAIL! or PASS! it just says RESET! and my phone is restarting. Shortly after it restarded you can see the RESET! turning to PASS!, but when I tried checking in TWRP is installed, it wasn't. I tried it again and then Odin suddenly says FAIL! After restarting my phone it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I couldnt even enter download mode anymore till I tried if getting out the battery would work. I could enter download mode again and flashed the same TWRP on my phone again, and aigain it says RESET! but after that my phone worked again. I tried flashing with another version of Odin and TWRP but same thing happened - First run it said RESET!, second run FAIL!.
I thought maybe rooting the device and installing TWRP via their app afterwards could do the trick. So i tried flashing Autoroot with Odin but it made my phone showing a screen with Samsung logo and in the upper left corner something about recovery mode, seemed to be a loop/freeze. So i took out the battery again and flashed TWRP and that solved the problem again. At last I tried rooting by using TowelRoot but it says the service is not available for my device, even though S5 is listed as a supported device.
I really have no idea what to do anymore, would be very grateful if someone could come up with a solution.
BTW: Is it possible to flash CM13 without using custom recovery by using stock recovery?
Greetings
Khalitas
Click to expand...
Click to collapse
RESET! is basically the same thing as PASS! What version of TWRP are you installing? The keis screen you got is the same as download mode. Why are you using heimdal? your idea to go with Odin was a good one. Anyways, download TWRP 3.0.2 (not 3.0.2-1 or 3.0.2-2 as they are buggy) and flash it in Odin, reboot to recovery and install the ROM you like, of course following its specific install instructions. No, you cant install a custom rom with stock recovery
Thanks for your answer, meanwhile i managed to fix this problem. Had to flash the latest Firmware because twrp (could just install the oldest version otherwise I had no option to boot into recovery at all) said no OS installed. After rooting via Odin worked like it's supposed to.
Why did I use Heimdall? Because I wanted to stick to CM-wikis instruction and they used Heimdall.
Hello,
I'll try to detail as much as I can to explain how i ended up Bootlooping :
I tried today to root my LG H870. (imported from Germany, according to the seller).
I followed the tutorial on xda to unlock the Bootloader on the device.
After flashing it, it launched Android the 1st time without difficulties.
I rebooted into TWRP, flashed supersu, then rebooted into Android. Problems started there, the system told me my partition was encrypted, and asked if i wanted to reinitialize it. After doing so, it's been stuck, bootlooping to TWRP, the internal partition empty.
I followed numerous tutorial on how to flash a stock ROM through TWRP, Fastboot, ADB Sideload, without any success.
With TWRP, it was always ending up saying the flash wasdone, without writing a single file in the partition.
I also tried installing stock ROM with LGUP, but once again, didn't seem to work. While in download mode, it was either telling me the phone was an unknown model, on port COM3, or that there was no handset connected.
I then followed another guide, using LG Firmware Extract and LG Flash Tool. It didn't work as expected, but, I don't really know how, it made LGUP seeing my phone correctly. I was then able to flash a stock ROM (H87010f). No error during the process.
After the LG Logo, i get now a blue screen, saying for some seconds "Encryption Progress", and after that "Factory Reset Status", with a big red "2", and it gets stucks there.
Once again, if I get into download mode and into LGUP, i get now the "no handset connected" message.
Is someone on here able to help me?
If more infos are needed, tell me, i'll try to answer!
Thank you all!
Hey guys,
I tried to root my gf's S5 with CF-AutoRoot's package. I got this for the specific version which I double-checked
Included in the package was Odin and the image with an "installer".
Everything was fine, device detected in Odin, selected image in AP and let it rip... Except I got an error after it was in the process, under UDC start, can't remember exactly as I had restarted the device with the loading bar at like 30% of the way... it stated something dev_state
After I restarted, I got the "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
I would've thought it was going to be pretty straight forward and decided not to do a backup but I'm so getting killed if I'm going to lose the data!!!
Any insight? thanks
I tried to get Samsung Kies for the recovery but under the list of devices requiring emergency recovery it won't detect it...
I managed to retry the Odin flash with the same outcome.
The error message is unsupport dev_type if that makes any sense to someone
Well issue seems to have fixed itself by flashing latest TWRP... The Odin flash went smooth and phone booted normally...
must've been something off with the AutoRoot