Database Users

Need latest Bootloader & Modem 935W8 (canada) Variant (Please and Thank You)

As the titles says, I need the latest BL and Modem (or a link on where to get it) as I am going to install "OnTheEdge" 6.0 Beta 2 to try it out however I can't figure out how to download the BL and Modem for my specific variation and from my understanding due to canada the W8 is not compatible with the F international variation.
*Edit* - I should note I have already looked at "https://www.sammobile.com/firmwares/database/SM-G935W8/RWC/" however that only has for 6.0.1, I need the 7.0.0 correct?
*Edit 2* - Lets say I do just download the latest 6.0.1, its a large file from SamMobile, how do I get the BL and Modem flash from this?

Uploading... give me a moment
APK3 (from 6.0.1. No 7.0 CP/BL available yet for the W8 variant, but no problem with the 6.0.1 ones)
Bootloader https://drive.google.com/open?id=0B7NTwhbole31b0xHMjNOZFJ2MVU
Modem https://drive.google.com/open?id=0B7NTwhbole31MTFBNEh5Zi1LNzg

Thank you very much for the quick reply and for the uploaded files as well!
May I ask what you did to get those files (trying to learn all this stuff as I find the world of a rooted phone an awesome one but there is much to learn!) ?

thexcodec said:
Thank you very much for the quick reply and for the uploaded files as well!
May I ask what you did to get those files (trying to learn all this stuff as I find the world of a rooted phone an awesome one but there is much to learn!) ?
Click to expand...
Click to collapse
I extracted the BL/modem from the full Generic APK3 firmware I found here a few weeks ago. I wanted the latest available modem/BL for my W8 S7 edge too, but I didn't want to subscribe to SamMobile just for that. I suggest you to keep that link, it has many up-to-date files and firmwares available for our S7 edge variant.
Having them separately is more convenient than having to download the full firmware (2GB+) though but well...

Correct KDZ File for Root Help - H990DS

Hi all,
I recently purchased a brand new, factory sealed, LG-H990DS from Amazon.com in the US. From all the documents that came with it, the unit is from LGE Singapore. However, my firmware is v10f_SEA_XX rather than an SG version (I understand Singapore versions should be _SG, correct?).
Now, I want to downgrade to an earlier security patch (Currently June 1st, 2017), so that I can root the phone and hopefully enable VoLTE (I have it in Quick Settings but it's grayed out and I can't toggle it )
I'm confused about which .kdz to use... there's a bunch of SG and TWN ones, but won't that brick my phone? I already bricked my first H918 (T-Mobile) one by somehow flashing the wrong T-Mo .kdz (in hind-sight I should have checked the md5 sum). I know H990DS is a lot harder to root than TMO so I'm kinda scared. I've rooted/flashed on many, many phones, but the H990DS seems to be the most tricky.
Thanks for your help in advance!

I've got H990DS too and managed to root it.
I am using this guide https://forum.xda-developers.com/v20/development/dirtysanta-h990-t3624296/.
But I've got November 2017 security patch, so I got to downgrade to earlier firmware using this guide https://forum.xda-developers.com/v20/how-to/restore-v20-to-100-stock-bricked-devices-t3524903. I use oldest firmware available, that is v10b https://lg-firmwares.com/download-file/?fileId=4345. and currently stuck here with 10b. currently figuring out how to update to the latest firmware using KdzFlasher

Hi Boxy52, I have the same phone, the KDZ file you need is (https://lg-firmwares.com/download-file/?fileId=5196) version "V10c", with this you can begin the tutorial writed of the described above by the damadikaz, after you can upgrade the firmware up to version V10h on tutorial https://forum.xda-developers.com/v20/development/tool-kdz-writer-t3649818...

Hey damadikaz,
So to confirm - it doesn't matter which region I flash - I won't be bricked, correct? My only concern was if I flashed the wrong region. But if all H990DS firmwares work with eachother, I shouldn't have an issue other than bloat?
Thanks!
boxy52

Hey pkrename,
You have the SEA firmware as well right, so I've got a question - do you have any bloat ware? Mine has none! My phone shipped with V10f_SEA_XX and I have ZERO bloatware its amazing because I've heard everyone else with SEA firmwares was stuck with a lot of bloatware. Do you think I've got some special version of the ROM? Just want to make sure that I'm indeed on the same ROM as you.
Thanks!
boxy52

Hi Box, Sorry I'm late, about the firmware bloatwares, I have no problem with them ... at least in my firmware I do not have many bloatwares other than google.

For anyone wondering:
First try the TWN series of Firmware. My phone came with TWN-10C (December 1st Security Patch) so I was able to root straight out of the box. I still use the TWN firmware today (except the latest version as displayed in my signature) as this is the cleanest of Firmwares I've found so far. All I had to do was use Root Uninstaller to uninstall a few Facebook/Instagram/other apps that came with the firmware and that was it.
Secondly, the SEA/SG (South-East Asia and Singapore) firmwares are the same, as seen here
Hope this helped

955U1 Nougat to 955U TMB Oreo

So I have what was originally a VZW 955U, flashed soon after I got it, to the unlocked 955U1 firmware using Prince's Odin and have been happy so far. Now with all the Oreo updates released except for the unlocked one, I'm wondering if I can just use prince's odin again to load the latest TMB Oreo firmware or need to do the whole engboot thing first? My current software is latest Nougat build for 955U1 and shows up as TMB//VZW.
Any thoughts?

No one? I remember reading on some of the earlier threads that if you flashed U1 first, you could then flash to the other carriers versions without the other steps but want to confirm. Don't want to deal with bootloops or softbricks.

I think you need the eng file ..but there is not oreo eng file..

Tried a lot of things, flashing tmobile oreo directly using modified and unmodified odin, trying to flash the latest Nougat builds from Tmobile using Prince Odin (the Dec one almost took and showed up as TMB/TMB/VZW but ultimately would not get updates) and then flashing back to the unlocked version but nothing worked, will likely have to do a full erase and reload the unlocked version. The eng boot file no longer works far as I can tell. Will just have to wait for the unlocked version to get updated. Sucks as this is a corporate phone and my firm has been pushing to get Oreo on all devices.

If someone has a recent guide on carrier switching the S8 , would appreciate it. Most guides here are from May of 2017 and I'm betting those files are too old to be compatible if you're on the latest Dec build for 950U1/955U1. At least doing a full reset and reflash of the 955U1 brought Wifi Calling which wasn't quite working right since I had just flashed over the 955U1 software over the stock verizon last year.
I think I'll just wait a few more weeks for the 955U1 Oreo to drop. Has to happen eventually right? Lol.

i need some help/suggestions on updating LOS my S5 klte

hi, i have a s5 (klte) SM-G900M the device is from the carrier claro from the Dominican Republic (LatinoAmerica) and im running LOS on the Nov 8 (2017) Build and i haven't updated the OS since then, i have been experiencing some random reboots when using open camera and other occasions, and i want to update the device to the latest build, but i have been told that the new s5 builds require the latest baseband ,back when i installed lineage os , my phone was on lolipop and i installed LOS on the phone without updating to Marshmellow (my bad :l), im running this baseband version: G900MUBU1BOE2 (wich was released in 2015), i have tried to find the "latest" version of the baseband but that seems to be the latest one for my particular device (the Dominican Republic S5) was released in 2015 , and i don't know if istalling another more update version of the baseband of other country, will introduce problems with the carriers from my country (The Dominican republic) , i have a backup of the stock touchwiz rom , but apparently i can't install the OTA because i have TWRP 3.1.1 installed and since it replaced the stock recovery, the OTA is no longer possible to install, i would greatly appreacite any help regarding this situation :/

THEwed123wet said:
hi, i have a s5 (klte) SM-G900M the device is from the carrier claro from the Dominican Republic (LatinoAmerica) and im running LOS on the Nov 8 (2017) Build and i haven't updated the OS since then, i have been experiencing some random reboots when using open camera and other occasions, and i want to update the device to the latest build, but i have been told that the new s5 builds require the latest baseband ,back when i installed lineage os , my phone was on lolipop and i installed LOS on the phone without updating to Marshmellow (my bad :l), im running this baseband version: G900MUBU1BOE2 (wich was released in 2015), i have tried to find the "latest" version of the baseband but that seems to be the latest one for my particular device (the Dominican Republic S5) was released in 2015 , and i don't know if istalling another more update version of the baseband of other country, will introduce problems with the carriers from my country (The Dominican republic) , i have a backup of the stock touchwiz rom , but apparently i can't install the OTA because i have TWRP 3.1.1 installed and since it replaced the stock recovery, the OTA is no longer possible to install, i would greatly appreacite any help regarding this situation :/
Click to expand...
Click to collapse
I couldn't find firmware for Dominican Republic but it looks like Ecuador shares the same firmware as you so try the below
https://www.sammobile.com/firmwares/galaxy-s5/SM-G900M/EBE/download/G900MUBS1CQD5/166984/
Or this one from Columbia
https://samsung-firmware.org/download/Galaxy__S5__/58l3/COB/G900MUBS1CQD5/G900MCOB1CPI1/
Place in AP section of odin
Once flashed go into recovery mode and perform a data wipe/factory reset
Also update your twrp version if you want to flash later custom roms

thanks!!
i have a few more questions:
1-)wich version of TWRP do you recomend for lineage 15.1? i heard some people having problems with the latest version
2-) if one day i want to revert to stock how do i aproach this? since my backup is from lolipop , and i dont think that the new firmware will play nice with that (in case i plan to sell the device or something)
3-) do you now if the latest magisk version works well with lineage 15.1?

THEwed123wet said:
hi, i have a s5 (klte) SM-G900M the device is from the carrier claro from the Dominican Republic......
Click to expand...
Click to collapse
So you want to update your Baseband Modem to the latest version before updating your LineageOS Firmware to 15.1.
The following link has the latest one for your device that's provided by haggertk. haggertk is one of the Official Lineage Team members.
https://androidfilehost.com/?fid=746010030569966172
Download the file on your PC, place your device in Download Mode (aka Odin Mode), then connect your device to your PC via USB Cable, Open Odin and place the downloaded file in your AP (or PDA) spot in Odin (nothing further) and start the flashing process.
It's fairly quick to accomplish, you won't loose anything on your device and, afterwards, you should be good to go for Updating to the LineageOS 15.1.
Just an FYI... The following is the Official LineageOS 15.1 thread that's specific to the klte devices for support and guidance.
https://forum.xda-developers.com/showthread.php?t=3830497
I wish you the best of luck and enjoy LineageOS 15.1!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900V device.

THEwed123wet said:
thanks!!
i have a few more questions:
1-)wich version of TWRP do you recomend for lineage 15.1? i heard some people having problems with the latest version
2-) if one day i want to revert to stock how do i aproach this? since my backup is from lolipop , and i dont think that the new firmware will play nice with that (in case i plan to sell the device or something)
3-) do you now if the latest magisk version works well with lineage 15.1?
Click to expand...
Click to collapse
1 - latest version of twrp - nothing wrong with it
2 - just flash stock firmware via odin
3 - latest version of magisk works fine with lineageos 15.1

THEwed123wet said:
1-)wich version of TWRP do you recomend for lineage 15.1? i heard some people having problems with the latest version.
Click to expand...
Click to collapse
This is a tricky question. The issues experienced are not all for the same variant. For example, some of the issues are for G900F but, my G900V hasn't experienced any issues.
Just keep in mind that if you experience any issues, you can always Downgrade it without a problem.
2-) if one day i want to revert to stock how do i aproach this? since my backup is from lolipop , and i dont think that the new firmware will play nice with that (in case i plan to sell the device or something)
Click to expand...
Click to collapse
Reverting to stock is not difficult because you just need the Stock Firmware and, possibly, the pit file (that's also available on the SamMobile forum and androidfilehost as well).
3-) do you now if the latest magisk version works well with lineage 15.1?
Click to expand...
Click to collapse
This is best asked on the following Official General Q&A Magisk thread.
https://forum.xda-developers.com/showthread.php?t=3432382
I wish you the best of luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900V device.

Thanks a lot for the help!! ,i like your detailed asnwers , will be updating after the new build comes out since last one failed to build

THEwed123wet said:
Thanks a lot for the help!! ,i like your detailed asnwers , will be updating after the new build comes out since last one failed to build
Click to expand...
Click to collapse
There's been 4 Official LineageOS 15.1 builds that's been released so far but, Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900V device.

A205F root please help me

Hello , here's my question :
I have a new unrooted A20
Can someone please help me to root January patched A205fxxs6ata2, the CSC is Indian and contains literally loads of bloatwares that can't be disabled and I don't need them.
Please help me

Maybeyou said:
Hello , here's my question :
I have a new unrooted A20
Can someone please help me to root January patched A205fxxs6ata2, the CSC is Indian and contains literally loads of bloatwares that can't be disabled and I don't need them.
Please help me
Click to expand...
Click to collapse
Start here.
https://forum.xda-developers.com/galaxy-a20/how-to/root-samsung-galaxy-a20-rooting-guide-t3954872

physwizz said:
Start here.
https://forum.xda-developers.com/galaxy-a20/how-to/root-samsung-galaxy-a20-rooting-guide-t3954872
Click to expand...
Click to collapse
Thank you for your feedback is the thread also for the s6 bootloader ? Because you mentioned it's for u2 and u4, but I'm on January security patch

Can anyone please provide me the stock boot file for A205fxxs6ata2 ? So I can patch it with magisk manager and root my phone

Maybeyou said:
Thank you for your feedback is the thread also for the s6 bootloader ? Because you mentioned it's for u2 and u4, but I'm on January security patch
Click to expand...
Click to collapse
Use the U4 one

What I did is changing the indian stock firmware (3.1 Gb) to the Moroccan firmware (2.7 Gb) without root. Through Odin.
Apart from the Netflix app ( can be disabled) I didn't find any other bloatwares
I used adb's pm uninstall -k method to remove some built in mini system applications like Facebook manager, print services etc
Results = fully debloated without root access and without losing warranty or updates.

Maybeyou said:
What I did is changing the indian stock firmware (3.1 Gb) to the Moroccan firmware (2.7 Gb) without root. Through Odin.
Apart from the Netflix app ( can be disabled) I didn't find any other bloatwares
I used adb's pm uninstall -k method to remove some built in mini system applications like Facebook manager, print services etc
Results = fully debloated without root access and without losing warranty or updates.
Click to expand...
Click to collapse
Good result

Thanks mate, i had problems trying to root, so after changing Csc , I decided that i will wait until they release the Android 10 on June 2020 (Samsung said that in the Samsung members App) I can't wait to experience OneUi 2 on this phone, then I will root inevitably ?
I'm so interested in lineage os too, I've used it before with good results, but unfortunately the A20 is not supported yet.
Have a great day

Maybeyou said:
Thanks mate, i had problems trying to root, so after changing Csc , I decided that i will wait until they release the Android 10 on June 2020 (Samsung said that in the Samsung members App) I can't wait to experience OneUi 2 on this phone, then I will root inevitably ?
I'm so interested in lineage os too, I've used it before with good results, but unfortunately the A20 is not supported yet.
Have a great day
Click to expand...
Click to collapse
It will run lineage GSI