Files to download:
1.Treble twrp.
2.vendor image .
3.Gsi image .
4. Appropriate gapps.
Instructions:
1.First flash treble twrp for your devices.
Note:
Treble twrp is required because inorder to flash treble ROM we need to partition the vendor image.
2. After flashing treble twrp go to wipe ->Advanced wipe -> select dalvik cache+ system+vendor+ Data + cache and wipe the partion
3.After wiping the partition, flash vendor image .
Note:
Use cardinal vendor +kernel image from cardinal Aosp project
4. After flashing immediately flash permissive zip .
Note:
Because some gsi ROM need selinux to be permissive in order to boot
5.Then flash the downloaded gsi image .
Note:
Gsi files will be in xz format ,so extract image from that and flash.
6.Reboot to system.
Related
please can I instal custom rom on g900v
instal custom rom on g9006v
use the search button..u will find
I want to add Arabic language.6.0.1
Yes, you can install custom ROM on g9006v
Download TWRP and flash it via Odin .tar file
Link :- https://dl.twrp.me/kltechn
And for ROM , Los 14.1
Link :- https://download.lineageos.org/kltechn
And for Gapps download from openGapps.org. Choose ARM 7.1 (Not 64 bit).
Installation
Boot into TWRP
TAKE NANDROID BACKUP
Go to wipe and advaced wipe
Tick Cache ,Dalvik/art cache , system , data and internal storage ( optional) then swipe to wipe
Now flash Los then flash gapps
Now reboot your device.
First Boot may take longer like 5-15 minutes.
hello every one , i know this was spoken about before but i followed every TUT in xda or out of this site and nothing has worked for me .
steps i did to be brief
1. unlock oem
2. flash twrp
3.magisk
4.no varity op5
all have gone in process without any errors , at last when i start the phone and check for root i get " not rooted"
i have did about 3 tut's using 3 different sources , most of them the same , but unlucky with any of them
https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
https://forums.oneplus.com/threads/...wrp-root-nandroid-efs-backup-and-more.548216/
https://www.theandroidsoul.com/oneplus-5-root/
----
oneplus 5 midnight black a5000 / android 9 / security patch DEC ,1 , 2018
will some one help please ?
i found the solution my self , ref: https://forum.xda-developers.com/oneplus-5/how-to/official-oxygenos-4-5-2-7-1-1-ota-t3627003
-----------
[Clean Flash] For Users with an Unlocked Bootloader and TWRP Recovery:
Download the full ROM zip from the downloads section above
Transfer the zip to the root of your device's internal storage
Only needed if you are coming from Oreo or if you use an old TWRP recovery that's not the latest and Pie compatible: Remove the compatibility.zip from the downloaded full ROM zip with either MiXplorer or Total Commander (not with any other tool!) on your device itself
Reboot to TWRP recovery (make sure you're using siankatabg's TWRP if you're on Oreo or codework's TWRP/blu_spark TWRP if you're on Pie) and take a nandroid backup of your existing ROM
Flash Magisk Uninstaller (recommended)
From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache, cache, system, vendor and data> Swipe to wipe
From the TWRP menu, Install > Select full ROM zip (modified one with compatibility.zip removed, in case you're on Oreo or unmodified one, in case you're on Pie) > Swipe to flash
Flash the latest stable Magisk in case you want to root
From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache and cache > Swipe to wipe
Optional: If you wish to decrypt, format data via TWRP (please note that wiping the data partition, which we did in the 5th step above, is not the same as formatting it) and after that flash Disable DM-Verity and ForceEncrypt 2.0 (OP5-5T-Treble).zip from here
Reboot
This is my first Oneplus device and I just realized that in this device, in order to flash Custom Roms, you need to have a OOS installed beforehand plus not wiping /System partition.
So I was wondering which one is the best and quickest way to do a clean and fresh install from scratch, with the less amount of stuff from previous roms since wiping /System will end up on a bootloop.
Would it be something like this:
Starting from fresh and clean OOS latest version:
-Wipe /Data /Cache /Internal
-Flash Rom + kernel (optional) + TWRP
-Reboot recovery
-Flash Gapps + Magisk.
-Reboot System.
Is this the cleanest way to do it ?
I've seen @Koogly 's video but I dont know if theres a better way to do it.
Thank you all.
dirtyl0lharry said:
This is my first Oneplus device and I just realized that in this device, in order to flash Custom Roms, you need to have a OOS installed beforehand plus not wiping /System partition.
So I was wondering which one is the best and quickest way to do a clean and fresh install from scratch, with the less amount of stuff from previous roms since wiping /System will end up on a bootloop.
Would it be something like this:
Starting from fresh and clean OOS latest version:
-Wipe /Data /Cache /Internal
-Flash Rom + kernel (optional) + TWRP
-Reboot recovery
-Flash Gapps + Magisk.
-Reboot System.
Is this the cleanest way to do it ?
I've seen @Koogly 's video but I dont know if theres a better way to do it.
Thank you all.
Click to expand...
Click to collapse
First time from oos zip
Flash latest stock rom oos
Flash twrp zip
Wipe data and cache
Reboot to recovery
Flash latest stock rom oos zip
Flash twrp zip
Wipe data and cache
Flash custom rom zip
Flash twrp zip
Flash gapps zip
Flash magisk zip if you want root
Reboot to system
If you are already on custom
Flash lastest stock oos zip
Wipe data and cache
Flash custom rom zip
Flash twrp zip
Flash gapps zip
Flash magisk zip if you want root
Reboot to system
If going from custom to oos
Back up all your internal storage pictures videos music etc
Wipe data internal storage and cache
Flash latest stock oos zip
Flash twrp zip if you still want to customize
Reboot to recovery
Flash latest stock oos zip
Flash twrp zip if you still want to customize
Flash magisk zip if you want root
Reboot to system
If you want a custom kernel on any of these methods I would recommend booting the rim first and going through setup process the rebooting back to to twrp after and flashing the kernel
Also you will want a USB c otg port bc after the first flash your data will be encoded. You can select the otg storage via twrp to make the process easier.
If you don't have an otg cable you will need to sideload each zip via cmd prompt with fastboot tools and sideload in twrp
After all flashes are complete and you boot the rom the encrypted data will no longer be encrypted on custom rom flashing if going back to stock oos rom you lose all internal data
Most ROMs threads have instructions in main thread and those should be followed first. Some ROMs may require some bits and pieces from original oxygen rom prior to custom install
Asoip for example
Is flashing oos necessary if we unlock bootloader?
I see instructions for lineage os dont mention flashing of oos bit they have the first step as unlocking the bootloader
mustafabakrolwala said:
Is flashing oos necessary if we unlock bootloader?
I see instructions for lineage os dont mention flashing of oos bit they have the first step as unlocking the bootloader
Click to expand...
Click to collapse
You flash oos first so you have the correct vender and up to date files etc before flashing. Some ROMs require you to flash old oos versions bc their rom was based on that oos vender
Hi to everyone, (Sorry for my bad english)
have you try a Treble rom?
I'm trying the Havoc 3.0 treble rom or AOSP phhusson but i'm blocked in a MI logo bootloop...I have followed this instruction
"Restart to fastboot mode
Flash vbmeta vbmeta.img with CMD/Terminal
Go to TWRP
Wipe-> format data-> yes
Flash the ROM image (system partition)
Wipe-> factory reset
Flash the GApps"
any help? thx
Wipe system data cach dalvik
Install img to system partition
Falsh pirmisver v4
Reboot
memox44 said:
Wipe system data cach dalvik
Install img to system partition
Falsh pirmisver v4
Reboot
Click to expand...
Click to collapse
I see in the phhusson thread system-quack-arm64-ab-vanilla.img for the "system" and system-quack-arm64-ab-gapps.img for "gapp" is correct? install all in to system partition?
thx
This works for any device that supports project treble...Thanks to all developers involved in this work
Requirements:
Must have Unlock Bootloader
Must-Have Custom Recovery
How to install:
1.Install a custom recovery Jason
2.Install vendor IMG for your device...(I used a simple workaround here. flash a custom ROM then reboot into recovery wipe cache data and system don't wipe 'vendor')...if you have a question you can ask me, Danny
3.Install Android 11 img into system partition(select install IMG not install zip then select system under partition) https://tweakguy.com/download-android-11-gsi-rom-for-any-phone/ (you must extract the downloaded zip to get IMG file)
4.Reboot (may take up to 10mins)
5.Enjoy
Android 11 preview version has a lot of bugs：p