Hi Guys, my Hardware Button for Power seems to be broken. Is there a magisk module for disabling? Thx
dd0s said:
Hi Guys, my Hardware Button for Power seems to be broken. Is there a magisk module for disabling? Thx
Click to expand...
Click to collapse
Guess not otherwise it's not possible to to turn the device on or off or enter bootloader
Maybe only when Android starting. Tried it with remapper but the programm didnt recognise the power button.
Related
Hi,
I have 1 htc blac100 phone lock password,
I tried by pressing volume up and down + power buttom but it shows USb menu like this in image
I can't understand where's the problem is, might be my volume up buttom is not working!?
any other solution without disassembling the phone,
how to update/ flash the phone
any solution,
thanks for help
br,
riteshgpt60 said:
Hi,
I have 1 htc blac100 phone lock password,
I tried by pressing volume up and down + power buttom but it shows USb menu like this in image
I can't understand where's the problem is, might be my volume up buttom is not working!?
any other solution without disassembling the phone,
how to update/ flash the phone
any solution,
thanks for help
br,
Click to expand...
Click to collapse
press both vol+ and vol- and power
it will work
karikari said:
press both vol+ and vol- and power
it will work
Click to expand...
Click to collapse
yes 100% working tested by me
WBr
[email protected]$!M @}{[email protected]
Hi guys,
I recently installed CM10.2 on my E612F but I have no longer access to CWM recovery. I reinstalled it but still doesn't work. I tried either the "reboot recovery" in terminal or pressing volume down+ power button. Does anyone know how to fix this ? thanks
HELP
jordiiB said:
Hi guys,
I recently installed CM10.2 on my E612F but I have no longer access to CWM recovery. I reinstalled it but still doesn't work. I tried either the "reboot recovery" in terminal or pressing volume down+ power button. Does anyone know how to fix this ? thanks
Click to expand...
Click to collapse
to access the CWM you have to hold down volume up and down, home button, and power button. once the phone vibrates once, stop pressing the power button. keep holding the other buttons until it goes to CWM.
MooSeKilla said:
to access the CWM you have to hold down volume up and down, home button, and power button. once the phone vibrates once, stop pressing the power button. keep holding the other buttons until it goes to CWM.
Click to expand...
Click to collapse
:good: Thanks ! but after I locked and reunlocked my bootloader it worked fine with the Power menu
Respond
jordiiB said:
:good: Thanks ! but after I locked and reunlocked my bootloader it worked fine with the Power menu
Click to expand...
Click to collapse
wellcan you help me lol every time i flash the bootloader my phone goes into a boot loop
MooSeKilla said:
wellcan you help me lol every time i flash the bootloader my phone goes into a boot loop
Click to expand...
Click to collapse
What exactly is your phone model ? E610 12 12F ... ? I have the 12F so need to flash the E610 unlocked bootloader, not the E612's.
REspond
jordiiB said:
What exactly is your phone model ? E610 12 12F ... ? I have the 12F so need to flash the E610 unlocked bootloader, not the E612's.
Click to expand...
Click to collapse
its alright i fixed my phone i used KDZ updater to get a ROM that had CWM already in it
MooSeKilla said:
its alright i fixed my phone i used KDZ updater to get a ROM that had CWM already in it
Click to expand...
Click to collapse
alright
Problem
Hey folks!!
I have an problem in my cm10.2 rom..
In my phone the OWNER quick setting tile is not working
I've factory reset my phone but nothing change&Play store is also not openinghttp://forum.xda-developers.com/images/smilies/crying.gif
plz help me
10x in advance!!!
jontisavani said:
Hey folks!!
I have an problem in my cm10.2 rom..
In my phone the OWNER quick setting tile is not working
I've factory reset my phone but nothing change&Play store is also not openinghttp://forum.xda-developers.com/images/smilies/crying.gif
plz help me
10x in advance!!!
Click to expand...
Click to collapse
hello, I'm no longer on CM10.2 so can't really help you. Try CM11, I find it pretty cool even if it's still in BETA 3.
Btw do you use Snapchat ? because video recording isn't working on my phone don't know why :/
Hello, i have problem : i cant turn off screen. When i press power button it not working. Power button works only when i want shutdown my phone. I also trying do faktory reset. I lost my root too. Please help me. Sorry for my english.
You have to press the home button and the power button together
Thanks for replying. But this is not working. Only doing screenshots.
Sorry, I misread Try to restart the phone
Thanks, but nothing isn't working, i try factory reset and reeboting too. Now I dowloading firmware from sammobile.com. I hope that fix it. I think of that broken some module from Xposed. Sorry for my english.
I own Galaxy Grand 2 G7102, but it has partially broken touchscreen (menu and back button won't work anymore) and broken power button. Rooting requires go to recovery mode so power button needed and volume down and home button as well
So how I can rooting when power button broken (which it required for recovery mode access)?
While I find parts for my Grand 2, find some solution for me to make rooting without power button needed (I don't need "just replace the power button" topic)
Thanks
UPDATE: I've successfully go to recovery mode via ADB, but I was stuck and I can't select anything cause of broken power button. How I can escape from this before I bring them to repairment? Tried connecting USB while "recovery mode" won't work and it won't detect on my PC!
UPDATE 2: Problem solved. Had I bring them to service center to repair power button
northernopsrey said:
I own Galaxy Grand 2 G7102, but it has partially broken touchscreen (menu and back button won't work anymore) and broken power button. Rooting requires go to recovery mode so power button needed and volume down and home button as well
So how I can rooting when power button broken (which it required for recovery mode access)?
While I find parts for my Grand 2, find some solution for me to make rooting without power button needed (I don't need "just replace the power button" topic)
Thanks
UPDATE: I've successfully go to recovery mode via ADB, but I was stuck and I can't select anything cause of broken power button. How I can escape from this before I bring them to repairment? Tried connecting USB while "recovery mode" won't work and it won't detect on my PC!
Click to expand...
Click to collapse
Not sure if its possible on recovery mode, remotely keyboard may come handy.
BTW, how did you turn on the device without [power button?
NeoLogY said:
Not sure if its possible on recovery mode, remotely keyboard may come handy.
BTW, how did you turn on the device without [power button?
Click to expand...
Click to collapse
I've plugged my phone first then I release and reinsert battery quickly to turn it on
Remotely keyboard? How? Using USB OTG?
I am super new to rooting I mainly use it for PokemonGo. I am following this video on YouTube.
Basically when I flashed via Odin, I then install Magisk. Then everything is working and rooted BUT when I restart my phone my Magisk is then magically unrooted (I dont know if this is the right term) it says 'Magisk is not installed' and underneath that is says 'Magisk Manager is up to date'
So why does it keep doing this? Everytime this happens I need to Flash again via Odin and do the whole procedure again. This only happens when I restart the phone. Why does it keep doing this and how do I fix this? I will pay someone who can fix this for me. Ive been trying to figure out for the past day and Im going insane. I have no knowledge about rooting etc like i said i just want to play Pokemongo location spoofing.
Appreciate everyones help.
If you are on the stock ROM, you need to restart into recovery to activate Magisk.
Hi what is a stock rom and do I have that? What is this recovery? Sorry I am new
littlepuppies said:
Hi what is a stock rom and do I have that? What is this recovery? Sorry I am new
Click to expand...
Click to collapse
Donkeykong307 said:
If you are on the stock ROM, you need to restart into recovery to activate Magisk.
Click to expand...
Click to collapse
How do I do that?
You can press Power + Bixby + Volume Up then after seeing the bootloader warning screen, release all buttons so it can boot to the system.
You can also enable advanced restart in developer options.
Stock ROM is the one that comes with the phone.
Donkeykong307 said:
You can press Power + Bixby + Volume Up then after seeing the bootloader warning screen, release all buttons so it can boot to the system.
You can also enable advanced restart in developer options.
Stock ROM is the one that comes with the phone.
Click to expand...
Click to collapse
Hi yes I remember doing the 'Power + Bixby + Volume Up' after flashing. So that part is done unless I'm doing something wrong?
What is this advance restart in developer options? Where is that and what does it do? If I do this what do I do after? Will this fix the Magisk not installed when I restart my phone? Also when I turn off my phone and turn it back on it works and it keeps Magisk so its just restarting the phone that is causing the problem.
Appreciate your help
So this topic is the same as the other one I replied to hence the "double vision" comment.
I believe you need to Power + Bixby + Volume Up every time you restart.
Advanced restart will allow you to enable rebooting into recovery (magisk mode), so you don't need to press the button combo, unless you need the actual recovery.
What guide did you use to install magisk?
Donkeykong307 said:
I believe you need to Power + Bixby + Volume Up every time you restart.
Advanced restart will allow you to enable rebooting into recovery (magisk mode), so you don't need to press the button combo, unless you need the actual recovery.
What guide did you use to install magisk?
Click to expand...
Click to collapse
If I press that when I restart phone then isn't that risky? If I mess up then I need to format my phone again to get magisk again?
Whats this advance rebooting? Will this fix my problem?
I followed this video https://youtu.be/o3a8YnWT3yk
Just looking at that video I'm not sure if advanced restart is an option on the stock ROM, i use LineageOS (custom ROM).
The button combo shouldn't be risky, if you hold it for too long just select the option to restart and try again.
Donkeykong307 said:
Just looking at that video I'm not sure if advanced restart is an option on the stock ROM, i use LineageOS (custom ROM).
The button combo shouldn't be risky, if you hold it for too long just select the option to restart and try again.
Click to expand...
Click to collapse
I'm really confused so which part of the video am I suppose to do?
Since you already have magisk, you need to press the button combo every time you restart, if you want magisk.
Pressing the button combo activates magisk., and holding the button combo activates the recovery.
Donkeykong307 said:
Since you already have magisk, you need to press the button combo every time you restart, if you want magisk.
Pressing the button combo activates magisk., and holding the button combo activates the recovery.
Click to expand...
Click to collapse
OK so everything I restart my phone I need to hold down bixy, volume up and power? When do i stop holding down the combo? Also let's say I mess up will my magisk not work or can I restart my phone again and do the combo or do I have to re flash via Odin and format phone? Sorry I just want to make sure because I've re flashed and formated my phone about 90000 times ?
Thank you
littlepuppies said:
OK so everything I restart my phone I need to hold down bixy, volume
Click to expand...
Click to collapse
i have a feeling, that you should read these 3 links at least one more time:
magisk: https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root
TWRP Method 1: https://forum.xda-developers.com/ga...ecovery-twrp-3-3-0-galaxy-s10-exynos-t3924856
TWRP Method 2: https://forum.xda-developers.com/ga...covery-twrp-3-3-1-0-s10e-update-2020-t4067765
blackspy_ said:
i have a feeling, that you should read these 3 links at least one more time:
magisk: https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root
TWRP Method 1: https://forum.xda-developers.com/ga...ecovery-twrp-3-3-0-galaxy-s10-exynos-t3924856
TWRP Method 2: https://forum.xda-developers.com/ga...covery-twrp-3-3-1-0-s10e-update-2020-t4067765
Click to expand...
Click to collapse
Thata so confusing especially the twrp guide
have fun being banned in ur pokemon go game after ur rooted also if it even works on a rooted device
elliwigy said:
have fun being banned in ur pokemon go game after ur rooted also if it even works on a rooted device
Click to expand...
Click to collapse
elliwigy, are you being sarcastic there ?
blackspy_ said:
elliwigy, are you being sarcastic there ?
Click to expand...
Click to collapse
nope