Hello,
I received my Nexus 6P yesterday and got my SIM card activated without any issues at Verizon. I immediately took it home, unlocked the bootloader, installed TWRP, and then flashed CyanogenMod's latest nightly. After booting in, wireless networks weren't detected, and I only had 3G (no 4G LTE as I should). I restored my backup of the stock ROM that I made in TWRP and it hung at the Google logo. I'm not sure why. I then flashed all the latest factory restore images (MTC19X) to get it working again and determined that the issues I had in CyanogenMod might have happened due to the vendor.img I had on my phone at the time not being compatible with that build of CM13.
My questions are:
1) What are the known issues that would likely occur due to vendor.img being a different version than what CM13 was based on? The concept of vendor.img is new to me. I haven't had this, as far as I know, on any of my other phones (granted I'm coming from a locked Samsung Galaxy S5 that I've had for almost 2 years)
2) How can you easily tell which vendor.img CM was based on so you know which one to flash?
3) Is there anything else I should be made aware of before attempting to flash CM13 again?
4) While using CM13, do most people recommend a custom kernel? If so, which one and how stable is it? What are the benefits of switching from the stock kernel, and how simple is it to go back if there's a problem?
Thanks!!
dude...I just got the N6P and ran CM13 within hours. This is what I did...
unlocked the bootloader
downloaded the lastest (MTC19X) image off of https://developers.google.com/android/nexus/images and unpacked it into the C:\Program Files (x86)\Android\android-sdk\platform-tools folder
ran the flash-all.bat
fastbooted TWRP
installed CM13. (didn't wipe internal storage)
installed arm64 open Gapps pico
BAM!!!
right now running stock kernel. it's cool. I'm PrivacyGuard-ing the hell out of all my apps (turned off START AT BOOT and KEEP AWAKE for almost every downloaded app), though, so battery is OK
also using Kernel Adiutor but underclocking values for the CPUs doesn't seem to stick
So it likely worked for you since you had flashed the newest vendor.img first. Apparently there are compatibility issues with certain features that cause them not to work (such as WiFi) if you're using an older one.
chaoticyeshua said:
Hello,
I received my Nexus 6P yesterday and got my SIM card activated without any issues at Verizon. I immediately took it home, unlocked the bootloader, installed TWRP, and then flashed CyanogenMod's latest nightly. After booting in, wireless networks weren't detected, and I only had 3G (no 4G LTE as I should). I restored my backup of the stock ROM that I made in TWRP and it hung at the Google logo. I'm not sure why. I then flashed all the latest factory restore images (MTC19X) to get it working again and determined that the issues I had in CyanogenMod might have happened due to the vendor.img I had on my phone at the time not being compatible with that build of CM13.
My questions are:
1) What are the known issues that would likely occur due to vendor.img being a different version than what CM13 was based on? The concept of vendor.img is new to me. I haven't had this, as far as I know, on any of my other phones (granted I'm coming from a locked Samsung Galaxy S5 that I've had for almost 2 years)
2) How can you easily tell which vendor.img CM was based on so you know which one to flash?
3) Is there anything else I should be made aware of before attempting to flash CM13 again?
4) While using CM13, do most people recommend a custom kernel? If so, which one and how stable is it? What are the benefits of switching from the stock kernel, and how simple is it to go back if there's a problem?
Thanks!!
Click to expand...
Click to collapse
1) Depends on ROM /VENDOR, sometimes nothings happens then an error message, sometimes things doesnt work
2) Just download fresh the latest snapshot, release or nightly (they are much more stable then for a few years!) and vendor image (use these ones which are recommended!)
https://wiki.cyanogenmod.org/w/Install_CM_for_angler (there is a link for the vendor)
3) If you stay close on the tutorials, i dont know what should happen (flashing a rom is normally not critical, installing a recovery can be!)
4) Custom kernels can be great, but its not a must-have. Which kernel you should use depends on your wishes: better battery, more power etc.
Hope i could have help you a little bit!
kaufikauf said:
1) Depends on ROM /VENDOR, sometimes nothings happens then an error message, sometimes things doesnt work
2) Just download fresh the latest snapshot, release or nightly (they are much more stable then for a few years!) and vendor image (use these ones which are recommended!)
https://wiki.cyanogenmod.org/w/Install_CM_for_angler (there is a link for the vendor)
3) If you stay close on the tutorials, i dont know what should happen (flashing a rom is normally not critical, installing a recovery can be!)
4) Custom kernels can be great, but its not a must-have. Which kernel you should use depends on your wishes: better battery, more power etc.
Hope i could have help you a little bit!
Click to expand...
Click to collapse
Very much so. I appreciate it!
Has anyone encountered the constant popup of the Select Sim Card message? I'm using project fi and I am still unable to find a solution to this issue.
I have an SM-N900V (Note 3, Verizon variant, hltevzw).
Detailed timeline:
- I flashed it back to firmware OB6 using Odin 3.09.
- I rooted it using ArabicToolApp.
- I used this tool to unlock the bootloader
- I installed a build of LineageOS 14.1 for hlte
- It didn't recognize the SIM so I did a dirty flash of this build of LineageOS 15.1 for hltetmo on top (hltetmo actually has different hardware than hlte, and the correct one for SM-N900V)
- Messed around with the APNs until it recognized and connected to Verizon's network. I DO have functioning SMS and LTE data, but I have not tested phone calls yet
- Messed around some with SuperSU in system- and systemless-mode. Bricked my device more times than I could count, then unbricked over and over using SuperSU's impeccable installer. Messed around with this quite a bit
- Also messed around with Xposed some. The OS is too unstable to run Xposed Installer correctly, so I uninstalled it
- Removed SuperSU, installed Magisk. Phone now passes SafetyNet
So, my phone now runs 8.1 and a Lineage build from 9 days ago. Cool. But, if I was satisfied I wouldn't be making this post. There are multiple instances of the same kind of "app freeze" - App screen freezes, sometimes it'll go completely black. Interactivity doesn't work, obviously, the app is completely frozen. Hold Back to kill doesn't work (Application Killed toast shows, but nothing happens). ANR (when it comes up) Close doesn't work. Home button works and brings me away from the app, but it's still there. Swipe away in Overview doesn't actually kill the app. Even in App Info, Force Stop doesn't work. The app is forever frozen. Tapping the icon from the launcher no longer does anything, it doesn't even bring up the app. The app is permanently crashed and inaccessible until a reboot.
Issues:
- Sometimes when booting the phone will not recognize the SIM until a reboot. As in, "No SIM" message and everything
- Sometimes it will get stuck at boot, I have foxy-boot installed, so I can see the logs. I don't remember what it was all about, if it comes up again I'll update the post
- Google Chrome sometimes crashes when trying to download a file. I've gotten my phone to self-host before, but this issue always seems to come back, and when it does Google Chrome ALWAYS crashes when trying to download a file. App Freeze
- Netflix installs and logs in but freezes at the "can't connect to service (-9)" message. App Freeze
- Certain apps like NativeScript Playground get stuck at the splash screen. App Freeze
- Xposed Installer did this when opening the Settings, whether Xposed was installed or not. App Freeze
- F-Droid also sometimes crashes, although it's somewhat arbitrary, I can't reproduce it reliably. App Freeze
I have tried reflashing the ROM, flashing Xposed uninstaller, reinstalling Magisk, none of it seems to work. I have TWRP 3.3.0 so I can do pretty much anything that doesn't involve the SD card (the SD card is probably broken in hardware, it's so read-only that Android and TWRP both can't write to it at all, but they can both read the same half-broken filesystem).
I fear that this OS is just too unstable for the phone and there's nothing I can do. I sincerely hope this is not the case.
Try other ROMs or perform a clean installation.
Make sure you are on PL1 bootloader/modem.
Currently using Resurrection Remix v5.8.5 Nougat because it was the last Android version for this device with working Bluetooth calls but if you don't use that feature you could use their Pie version as well.
RR ROMs are solid and work extremely well.
Do a clean installation via TWRP if you go this route.
terminator911 said:
Try other ROMs or perform a clean installation.
Make sure you are on PL1 bootloader/modem.
Currently using Resurrection Remix v5.8.5 Nougat because it was the last Android version for this device with working Bluetooth calls but if you don't use that feature you could use their Pie version as well.
RR ROMs are solid and work extremely well.
Do a clean installation via TWRP if you go this route.
Click to expand...
Click to collapse
I did a clean installation of RR 6.0.0 (Android 8.1) and it works a lot better than LineageOS did, with even more configuration options. I really really hate Pie and its gesture-based gimmicks (Screw you Google for copying more of Apple's bad design decisions), so I assumed Oreo would be more stable, but the ROM I installed still has crashing apps. Google Chrome still won't download most things (I've gotten it to download before), trying to change the accent color crashes the 'LineageOS Settings' app, and F-Droid is seriously messed up, but most other things are stable, including the Verizon network which required no pesky APN setup.
I'm on the OB6 bootloader/modem, is that a problem? I doubt that would be an issue, but I can always back up and reflash via Odin. The cool thing is that I installed a patch to TWRP which backs up /data/media along with everything else, after installing the custom ROM. So, really, I can do anything and be perfectly fine. There's, AFAIK, no way to ruin the phone unless something exploits the eMMC brick bug.
If there's another ROM you'd recommend me install, I'd be happy to try it out. I would really like to have a stable OS on here, where Chrome will work and download files. I'd also love Camera2 API since the phone has the chip for it (Snapdragon 800), but none of the ROMs I have support it and there's been no discussion online other than some years-old threads with no answers. I know there have been some articles online listing Note 3 as a phone that'd support Camera2 API with a software update. Would updating the bootloader/modem do anything on that front?
I would upgrade to PL1 bootloader/modem for your device. This is what I have and have had 0 issues. I'd recommend you trying the Samsung Internet browser over Google Chrome; it's much better in my opinion.
You can find the modem here:
https://androidfilehost.com/?w=files&flid=160694
As far as ROMs are concerned you can either try the Nougat version of RR which is what I am currently using as my daily driver with no issues at all including Bluetooth calls:
[ROM][HLTE\TMO\CHN][OFFICIAL]*** Resurrection Remix N 5.8.5 ***[13.03.2018]
https://forum.xda-developers.com/ga...-resurrection-remix-n-v5-8-3-vanilla-t3615227
See here to check whether or not your phone has the Camera2 API capabilities; if not use OpenCamera.
https://www.androidexplained.com/camera2-api-support/
terminator911 said:
I would upgrade to PL1 bootloader/modem for your device. This is what I have and have had 0 issues. I'd recommend you trying the Samsung Internet browser over Google Chrome; it's much better in my opinion.
You can find the modem here:
https://androidfilehost.com/?w=files&flid=160694
As far as ROMs are concerned you can either try the Nougat version of RR which is what I am currently using as my daily driver with no issues at all including Bluetooth calls:
[ROM][HLTE\TMO\CHN][OFFICIAL]*** Resurrection Remix N 5.8.5 ***[13.03.2018]
https://forum.xda-developers.com/ga...-resurrection-remix-n-v5-8-3-vanilla-t3615227
See here to check whether or not your phone has the Camera2 API capabilities; if not use OpenCamera.
https://www.androidexplained.com/camera2-api-support/
Click to expand...
Click to collapse
Excuse me but custom ROMs don't have "the Samsung Internet browser". Additionally the modem shouldn't cause app crashes (if it does, correct me please).
I might try the Nougat ROM. Bluetooth calls don't matter to me, but stability does. I just kinda really like Oreo and all its customization options but it may be too new for this old phone from 2013. It still works as a phone though, Messages and phone calls work fine, so I may just deal with it.
I use Open Camera, and I've tried multiple Camera2 API enablers. The phone has a Qualcomm Snapdragon 800 and the necessary links (in hardware, between the camera/other things) to support Camera2, but nobody seems to have tried it. Probably because the Verizon Note 3 is really locked down, and can only be rooted on a special version of the samsung ROM, and can only be bootloader-unlocked via the eMMC brick bug... There are Magisk modules for Camera2 on Exynos-based devices, but none for the Verizon Note 3 AFAIK.
I just found out that RR 7 officially supports `hltetmo`, but RR 6 doesn't. That's kinda sad, I hate Pie, but I might try it...
I've had the SEPL stuff before, that's the one that can't be rooted. I suppose I didn't consider upgrading again after I unlocked my bootloader. I'll try SEPL1 firmware again, but with a custom ROM...
You can install the Samsung browser from the Play Store. Again, highly recommended.
As far as SEPL1 just update the modem to it; that shouldn't cause any issues but it will ensure your SIM is recognized and data works with the latest ROMs. That is one requirement you will see listed on all of these ROMs.
Not sure which one you are trying to install but here are all the Resurrection Remix versions:
Nougat:
https://forum.xda-developers.com/ga...-resurrection-remix-n-v5-8-3-vanilla-t3615227
Oreo:
https://forum.xda-developers.com/galaxy-note-3/development/rom-resurrection-remix-n-6-0-0-t3748689
Pie:
https://forum.xda-developers.com/galaxy-note-3/development/rom-resurrectionremix-v7-0-0-t3894244
If you don't care about Bluetooth audio during calls then you can safely use Oreo and Pie options.
terminator911 said:
You can install the Samsung browser from the Play Store. Again, highly recommended.
As far as SEPL1 just update the modem to it; that shouldn't cause any issues but it will ensure your SIM is recognized and data works with the latest ROMs. That is one requirement you will see listed on all of these ROMs.
Not sure which one you are trying to install but here are all the Resurrection Remix versions:
Nougat:
https://forum.xda-developers.com/ga...-resurrection-remix-n-v5-8-3-vanilla-t3615227
Oreo:
https://forum.xda-developers.com/galaxy-note-3/development/rom-resurrection-remix-n-6-0-0-t3748689
Pie:
https://forum.xda-developers.com/galaxy-note-3/development/rom-resurrectionremix-v7-0-0-t3894244
If you don't care about Bluetooth audio during calls then you can safely use Oreo and Pie options.
Click to expand...
Click to collapse
Yeah but, data and calling worked fine on the LineageOS and RR roms, so there's no reason to update the modem.
Besides, I flashed SEPL1 6 times using Odin (multiple times by flashing, rebooting directly into download mode and flashing it once more) and it doesn't want to update. Still on OB6. On the latest (official Pie) RR rom, data worked on first boot but doesn't work anymore (I'm going to mess around with the data settings until it works), but I have no reason to believe that my phone needs a modem update to function.
I did, many times, make calls to various phone numbers and they all worked flawlessly. SEPL1 is therefore not needed if that's all it does.
And I do know about all the Resurrection Remix versions: One is Nougat from their archive, one is the Oreo version I had installed just yesterday before flashing Pie, and the other one is Pie which is now officially supported.
I am currently working on getting RR7 to work, it's only crashed a few times, and I don't even remember what those times were (I think it was using the Back button in Overview/Recents at the same time as the Overview button?)
When updating modem via Odin you have to pull the battery and don't let it reboot the phone for it to stick (disable that option in Odin) and flash it again and then reboot. If you look at the ROM threads for anything newer than Android v5 they all recommend updating to the latest bootloader & modem for your device which in this case is PL1. This can be to prevent crashes/no signal /no SIM, etc...
Are you dirty flashing these ROMs? I have never experienced any crashes with any of the RRs on my phone but I always do a clean install and make sure to also delete the "Android" folder on my SD Card via TWRP after doing the "Advanced" wipe and deleting everything listed there except for the External SD Card.
terminator911 said:
When updating modem via Odin you have to pull the battery and don't let it reboot the phone for it to stick (disable that option in Odin) and flash it again and then reboot. If you look at the ROM threads for anything newer than Android v5 they all recommend updating to the latest bootloader & modem for your device which in this case is PL1. This can be to prevent crashes/no signal /no SIM, etc...
Are you dirty flashing these ROMs? I have never experienced any crashes with any of the RRs on my phone but I always do a clean install and make sure to also delete the "Android" folder on my SD Card via TWRP after doing the "Advanced" wipe and deleting everything listed there except for the External SD Card.
Click to expand...
Click to collapse
"pull the battery and don't let it reboot the phone for it to stick (disable that option in Odin) and flash it again and then reboot"
So...
- Reboot phone into Download mode
- Pull battery while in Download mode
- Flash thingy
- Reboot back into Download mode
- Flash thingy again
? That will be very difficult to do with my dodgy charging cable that doesn't like being repositioned...
I do that without pulling the battery, but I could try it with.
I'm downloading the full SEPL stock image to flash. Once that's done, I'll flash it, reflash TWRP, restore my backup, and see if the baseband has updated.
And no, never dirty flashed the ROM. Always completely wiped data, system, cache and everything. I always backup first. I currently have 3 backups: Lineage OS (before installing RR), RR6 (Oreo), and RR7 (right now before that stock image I'm going to flash).
My external SD card is nonfunctional and read-only with some trash files from the previous phone.
I flashed the stock SEPL ROM. Baseband still didn't change. Restored from backup, SIM now works. Network is detected, SMS and data both work reliably on all reboots.
I will mention that I did brick my phone by using Odin to erase the eMMC, but I fixed that from TWRP, and now everything works flawlessly. There are still some app crashes, but most things are very stable. Camera2 API still nonexistent, which is sad because I got used to it on my old phone, but I shouldn't hope for it.
Hello everybody. I have a issue that is litterally making me go crazy. Basically, on every custom rom i've tried so far (Pixel experience both normal and plus, HavocOS, CRDROID, every one of them in their latest versions) video recording through any kind of camera app doesn't work, except for the ANXCamera_Unity_157, where the video recording works, in a very smooth way, but it has a bad video quality, looking like it has a very low bitrate. I unlbocked the bootloader while i was on miui 11.04 global, i wiped everything and formatted DATA through OrangeFox recovery, i'm saying this because i saw that nobody has wiped out the Internal Storage during a custom rom installation. Thanks in advance.
--UPATE--
I tried to flash the miui 10.3.10 through fastboot, and the camera didn't work at all at first, then it asked for permissions and started working, however i still can't record any videos, except for short videos. I tested the hardware and the hardware is okay. Before this i tried to restore a backup that i made on orangefox before any rom flash, and the backup doesn't work. I tried to flash the miui 11.04 global (the rom i had at the beginning of everything) from the recovery, and camera didn't work completely, along the wifi connection (i open the wifi, click on "activate" and it stalles, then turns itself off and makes the phone laggy) i don't completely know what to do, i've been searching for fixes for a bit now and it looks like i'm the only one on the entire world who has this issue. I do really need some help or at least an advice or something
--UPDATE (FINAL)--
While i was too concerned about the video recording i didn't notice that there wasn't a single sensor that was working, so i figured out that the persist partion was corrupted. I fixed everything, video recording included, just by flashing the stock MIUI (11.05) through Fastboot, and then, from the same .tgz file (the fastboot flashable rom, you can find that if you search on the internet), i took the persist.img and flashed it using orangefox recovery, and it's done, i fixed that.
I used to have Havoc OS and everything was working fine but the location. it never worked for some reason and i needed it on my everyday life.
So used UPPERCUT to install stock ROM, ONLY to quickly realise that CAMERA, FLASHLIGHT and YouTube didn't work.
(when opening camera there was only a black screen, flashlight said i was using a camera app and YouTube was endlessly loading without showing my feed)
I wiped everything and flashed stock ROM from here: https://forum.xda-developers.com/lg...-h870-eu-30b-rom-t4007979/page10#post83380121
STILL having the same problem.....
when using havoc OS i didnt have this problem...
any ideas?
Did you flashed Nougat first? If not flash Nougat
to further explain my problem,
even though Camera used to work fine on HAVOC OS,
now even when using a Hardware Tester from Play Store, the app can't find a the camera...
can flashing stuff on your phone kill hardware?
I had a similar issue with a H872. Camera & proximity wouldn't work after flashing back to stock Oreo from Havoc. Someone here suggested flashing back to Nougat. Lo and behold...it fixed all my issues. I then performed software updates to get to the latest stock version.
Good luck!
Using Titanium, RR, and both LineageOS' the phone always powers off at some point during setup and takes me to recovery. Is there anything I'm missing?
I'm assuming it might be either a firmware issue or the gapps I'm using. The only roms I have had no problems with are ArrowOS and PixelExperience, both which include their own gapps. However, I had the issue anyways with a LineageOS that came with gapps.
I'm coming from the latest firmware, MIUI global 12.03 and the OpenGapps I try to use are ARM64/Android10/nano, tried both TWRP and orangefox but the issue is still there. It's likely not a hardware issue, the power button/volume buttons work just fine.
Can u provide a video of the exact moment when it happens ?