Related
Guys,
I'm in need of help fast.....
Just tried to do the Froyo Upgrade and have hit an almighty problem.
Kies downloaded and went to the next stage 'Upgrade'.
It got about 5% into doing this when the bar stopped moving and the phone switched off.
It's been like this now for over 30mins..... The phone won't power up (it's still connected to the PC).
HELPPPP.
Well you get my sympathy vote! But other then that I think you know yourself what to do. You've been around... Good luck!
Yes..... Bloody Phone, Bloody Kies, Bloody Samsung.
I unplugged the phone in the end and Kies offered to do a Firmware Recovery so I thought why not give it a try.
I went into Download mode, reconnected and Kies started the recovery procedure only for again the bar to stop moving again and it's stopped doing the recovery.
The screen on the phone remained a constant bright Yellow.
I unplugged it again and tried once more... It again stopped about a quarter way into the recovery only this time the screen has turned a constant Green.
Damn.................
The sad thing is that this reminds me so much of my sinclair zx81. 25 years later and we still have to deal with the same problems. Never sure the data gets from point A to point B.
Right.... Now I need to find the address for UK returns.
Don't have my warranty card info with me either so looks like I'll have to Google the returns.... but I'm busy as hell and have an Op to carry out soon.
If anyone comes up with it (or the link) I'll be grateful.
Bugger....
I'm probably teaching the teacher, but are you using the USB lead supplied with the phone? I tried to download some music using another lead and the download stopped halfway.
Sorry if this is too obvious.
Geryatrix said:
I'm probably teaching the teacher, but are you using the USB lead supplied with the phone? I tried to download some music using another lead and the download stopped halfway.
Sorry if this is too obvious.
Click to expand...
Click to collapse
No problem on the 'techer', any advise or assistance is better than nothing.
Yes, I used the cable supplied by Samsung... Nothing seems to sort this out.
As you are thinking of returning it, I conclude you can't get to any recovery/download mode. I don't know if Kies messed up the bootloader or keymappings but there is still the diy jig you might try. Also I have come across many devices in my day that needed repetitive flashing to get to the 100%. It would be bad if this was the case with a 2010 phone but hey its a Samsung.
sargasso said:
As you are thinking of returning it, I conclude you can't get to any recovery/download mode. I don't know if Kies messed up the bootloader or keymappings but there is still the diy jig you might try. Also I have come across many devices in my day that needed repetitive flashing to get to the 100%. It would be bad if this was the case with a 2010 phone but hey its a Samsung.
Click to expand...
Click to collapse
Well I've tried the Firmware Recovery at least a dozen time, each time it starts and stops at different parts.
I nearly got to three-quarters through when the bloody thing hung again.
No problem with the 3 Botton access and getting the Yellow Android Man on screen.. No problems connecting to Kies but as soon as you try the recovery it stops at some point during the process simply saying "An unexpected error has caused firmware upgrade to fail. Do you want to perform firmware recovery now?"....... and that came up whilst doing the firmware recovery.
Doesn't work to flash with odin either?
xExisioNx said:
Doesn't work to flash with odin either?
Click to expand...
Click to collapse
I don't want to use Odin if possible.
With that many different phones and ROMS available I don't want to end up screwing the phone totally.
Well Kies does not have a reputation to be very functional but there are two or three other tools to flash your phone. Although I am not a compulsive flasher, I did use Odin a couple of times. I am not sure exactly why you are having stage fright (referring to your other post on this matter).
Bringing it back to Eclair with a stock rom, using the rom, pit and instructions on http://www.samfirmware.com might help you to restore sanity. Once you are sure you haven't lost your phone you can then retry to use Kies.
The problem for you might be a partialy broken bootloader or incompatibility between the rom mappings and your phones current setup. Flashing a low rom might solve that. (As I understand from heimdall there are high and low packages, the low packages contain a bootloader and are more risky to flash since replacing the bootloader might truly brick your phone)
Also I read about people just flashing a pit file to force a repartition and format of the phone.
Make sure to get it fixed before op, I wouldn't want my doctor to worry about his phone, stiching me up with a pair of siccors stil in me ;D
Don't be scared of Odin. It has recovered my phone a million times
Really, the time and effort of getting a replacement when you can fix it in 2mins with odin in your own home... seems crazy.
You can flash a UK firmware if theres one available, or otherwise flash any firmware and update to UK firmware using kies reg hack, as far as i understand.
sargasso said:
Well Kies does not have a reputation to be very functional but there are two or three other tools to flash your phone. Although I am not a compulsive flasher, I did use Odin a couple of times. I am not sure exactly why you are having stage fright (referring to your other post on this matter).
Bringing it back to Eclair with a stock rom, using the rom, pit and instructions on http://www.samfirmware.com might help you to restore sanity. Once you are sure you haven't lost your phone you can then retry to use Kies.
The problem for you might be a partialy broken bootloader or incompatibility between the rom mappings and your phones current setup. Flashing a low rom might solve that. (As I understand from heimdall there are high and low packages, the low packages contain a bootloader and are more risky to flash since replacing the bootloader might truly brick your phone)
Also I read about people just flashing a pit file to force a repartition and format of the phone.
Make sure to get it fixed before op, I wouldn't want my doctor to worry about his phone, stiching me up with a pair of siccors stil in me ;D
Click to expand...
Click to collapse
Thanks... Need to find out now which is the right PIT to download.
I was on JF3.
God... if only I had more time on my hands.
Okay... got to go guys... Surgery to do.
I'll do the Odin later.
To save me time searching could someone please post below the relevant links I need to get Odin and the procedure....
Cheers.
When you flashed did you remove your sim card? I had that same problem with ki es. Removed the sim card and redid the flash and it continued on it's way.
How this helps.
Sent from my GT-I9000M
Well, if you have an account at samfirmware you can use this link http://www.samfirmware.com/WEBPROTECT-i9000.htm.
Make sure before you do anything to check your phone model is the one I linked to. Making a backup of your efs directory is not possible anymore but normally that should be done also. As a precaution I always remove my external sd card and sim card before flashing and - as you know - have the battery loaded to the max.
It might be an idea to skip jf3 and go to JM8 with a 512 pit and repartition on. This because it seems to be the recommended way of doing things at samfirmware as preparation for the flashing of current froyo releases.
I have never had problems with their way of doing things but opinions differ.
[EDIT]
I downloaded their JF3 package to see if there was a pit file included as there is some discussion what PIT file to use 512 vs 513. The package contains no information on that. It does however contain the word LOW in one of the filenames ...
Beards said:
Okay... got to go guys... Surgery to do.
I'll do the Odin later.
To save me time searching could someone please post below the relevant links I need to get Odin and the procedure....
Cheers.
Click to expand...
Click to collapse
I don't think you need to use a pit, odin should use the information from the phone assuming partitions remain intact. I've flashed a dozen times without one. If you do use one then use 512.
First off, get into recovery try and clear, reset what you can. Remove the sim and external SD as a precaution. Then back to download mode without the phone usb connected.
Grab the JPO firmware > http://www.multiupload.com/MX8XW7BG24
Grab odin 1.3 > http://www.megaupload.com/?d=MADK0XTB
Extract the firmware somewhere, open odin then select JPO_JPO_U_JPP.tar as PDA. Leave everything un-ticked except reboot. Plug the phone into your PC make sure Kies is not running and the battery is charged. In odin you should see a yellow window under ID:COM with a COM port open. If you do hit start, if all goes well a green bar will move across until the phone reboots. Leave it to do its thing at the big S (I usually unplug USB by now, to avoid problems) wait upto 10mins first time. If it hangs try a reset and cache clear and reformat SD. That's all I do, worked with all the firmwares I've downloaded from Samsung's FUD server.
The PIT files are templates for partition information so Odin can manage the size of the internal device partitions. Your standard device should already be on 512 layout, the other PIT's were development hacks. Like I said you shouldn't really need to repartition, but if you do > http://www.multiupload.com/I5WICSBFJ1
Fornowagain said:
I don't think you need to use a pit, odin should use the information from the phone assuming partitions remain intact. I've flashed a dozen times without one. If you do use one then use 512.
First off, get into recovery try and clear, reset what you can. Remove the sim and external SD as a precaution. Then back to download mode without the phone usb connected.
Grab the JPO firmware > http://www.multiupload.com/MX8XW7BG24
Grab odin 1.3 > http://www.megaupload.com/?d=MADK0XTB
Extract the firmware somewhere, open odin then select JPO_JPO_U_JPP.tar as PDA. Leave everything un-ticked except reboot. Plug the phone into your PC make sure Kies is not running and the battery is charged. In odin you should see a yellow window under ID:COM with a COM port open. If you do hit start, if all goes well a green bar will move across until the phone reboots. Leave it to do its thing at the big S (I usually unplug USB by now, to avoid problems) wait upto 10mins first time. If it hangs try a reset and cache clear and reformat SD. That's all I do, worked with all the firmwares I've downloaded from Samsung's FUD server.
The PIT files are templates for partition information so Odin can manage the size of the internal device partitions. Your standard device should already be on 512 layout, the other PIT's were development hacks. Like I said you shouldn't really need to repartition, but if you do > http://www.multiupload.com/I5WICSBFJ1
Click to expand...
Click to collapse
Surgery postponed until tonight so I have some free time.....
Okay, I got Odin 1.3 & JPO Firmware.
I loaded the JPO into Odin (in the PDA section).
Next I put the SGS into Download Mode and connected via USB and sure enough the ID:COM came up yellow with COM7 so I hit Start.
The green line went so far across under KERNAL but just as it was about to finish that box the SGS screen changed to a solid Blue screen and nothing further is happening in Odin.
Any advice??
Odd never seen that before, maybe your root problem. Should have rebooted automatically once the progress bar reached the end assuming you had the reboot option selected. Try a manual reboot, hold the power button down until it restarts. My next step would be the repartition and try again, load the PIT file (as PIT). Same flash procedure as before just using the 512 PIT, reset it all and try again.
I want to flash an Aussie ROM on my HK 32GB n9005. I've been doing some reading and what I think I need to do is as follows...
ghibli3's thread at http://forum.xda-developers.com/showthread.php?t=2550823 specifically addresses this issue and thanks to those contributing there and elsewhere.
Now to check I understand what they are saying before I brick my phone.
I have these:
CSB_signed_HLTE_EUR_OPEN_32G_0718.pit
CSB_signed_HLTE_EUR_OPEN_32G_0805.pit
ghibli3-N9005.pit
ratcom-N9005.pit
I also used ghibli3's N9005-SaveMyPit from http://forum.xda-developers.com/attachment.php?attachmentid=2426123&d=1385903491 to get a copy of my current pit.
I have my original HK MI7 stock, a HK stock MK2 (used to root my phone originally using RDLV) and both an MI7 and MJ7 Aussie ROMs.
So... here is what I think I need to do... Please let me know if this is correct or tell me how to do it better.
Using Odin and with phone in DL mode, USB Debugging on, Samsung drivers and ADB setup on PC...
1. Load a PIT file in [PIT] in Odin and tick [Re-Partition] then [Start]
(1st question, do I reboot the phone or just go to the next step?)
2. Follow RDLV steps to flash the Aussie MJ7 to root the phone.
(2nd question, should I drop back to the MI7 version for the root operation? I don't think it is needed as when I rooted my phone with HK version, I had HK MI7 on the phone and used HK MK2 to root it)
(3rd question, I have Kies 3 on my PC - should I uninstall it before doing any of this or might it be helpful to have it still installed?)
OK, so no comments so far... let's try a slightly different approach.
(4th question, Can I load the PIT into Odin, tick [Re-Partition] and add in the VEGA version of the AP (from RDLV) and then flash them as one?
Journyman16 said:
OK, so no comments so far... let's try a slightly different approach.
(4th question, Can I load the PIT into Odin, tick [Re-Partition] and add in the VEGA version of the AP (from RDLV) and then flash them as one?
Click to expand...
Click to collapse
For using PIT file, you need to add the PIT to Odin when you flash so it'll repartition as it's flashing. However, don't take that as a solid cause I am not 100% sure myself as I haven't messed with PIT files (yet) - but from what I have read that is how it is done. - Have a scan through the HK bricked (solved) threads to be doubley sure cause yeah, it's easy to end up with a brick
Thanks for that. Kinda what I was planning to do but I'm not sure if I do the PIT flash first then do the rest or if I do it all as one process. I'll check out that thread... been looking anywhere I could find a PIT reference.
Well, that was fun... not.
I tried the PIT files with NAND erase all, re-partition f. reset time and Auto reboot all ticked - it failed - I got a systemconnection error. I tried again with each of the PITs listed above except ratcom's - his is from an MJ7 build and I was unsure if that would trip Knox or not.
2 hours pass, with me looking all around XDA and trying a variety of things. Incidentally I think maybe the systemconnect thing might be related to not restarting the phone to get the error screen. It seems Odin can do things when that screen is on that it can't do in plain Download mode. At least, on mine, the eventual fix worked only AFTER I had the error screen (shows the hone pic and a PC pic)
I didn't try flashing CWM. Nor doing anything that might add an MJ7 or KK bootloader. If I trip Knox I want it to be by my choice, not because I can't fix something.
But clearly I am doing something wrong in trying to repartition my phone - none of the PIT flashes worked. None of the flash ROM's worked. I looked around for a MJ3 or less ROM with the 4 files - figured I could get that I could try using a PIT for the right CSC and those files and solve both issues at once.
I tried my MK1 HK Vega image and no go. So I sat and thought it through and realised that last time I had problems I had the error screen NOT download mode so I rebooted the phone and Voila! up popped the error screen. Odin promptly flashed my HK MK1 version and now I am restoring my apps from the extSDcard. Got a bit of setup work to do but it's up and running again.
But I will have to trip Knox now - I'm sick of not having a Nandroid backup that could just restore everything where it was instead of me having to manually put things back as they were.
Any ideas as to what I did wrong?
Journyman16 said:
Well, that was fun... not.
I tried the PIT files with NAND erase all, re-partition f. reset time and Auto reboot all ticked - it failed - I got a systemconnection error. I tried again with each of the PITs listed above except ratcom's - his is from an MJ7 build and I was unsure if that would trip Knox or not.
2 hours pass, with me looking all around XDA and trying a variety of things. Incidentally I think maybe the systemconnect thing might be related to not restarting the phone to get the error screen. It seems Odin can do things when that screen is on that it can't do in plain Download mode. At least, on mine, the eventual fix worked only AFTER I had the error screen (shows the hone pic and a PC pic)
I didn't try flashing CWM. Nor doing anything that might add an MJ7 or KK bootloader. If I trip Knox I want it to be by my choice, not because I can't fix something.
But clearly I am doing something wrong in trying to repartition my phone - none of the PIT flashes worked. None of the flash ROM's worked. I looked around for a MJ3 or less ROM with the 4 files - figured I could get that I could try using a PIT for the right CSC and those files and solve both issues at once.
I tried my MK1 HK Vega image and no go. So I sat and thought it through and realised that last time I had problems I had the error screen NOT download mode so I rebooted the phone and Voila! up popped the error screen. Odin promptly flashed my HK MK1 version and now I am restoring my apps from the extSDcard. Got a bit of setup work to do but it's up and running again.
But I will have to trip Knox now - I'm sick of not having a Nandroid backup that could just restore everything where it was instead of me having to manually put things back as they were.
Any ideas as to what I did wrong?
Click to expand...
Click to collapse
2nd link in my signature.
Follow it to step 6. Then flash whatever ROM you want. Make sure your phone is 32 gigs or more. Won't work on 16 gb version.
So this gets a bit strange now... I downloaded Phone Info from Play Store and ran it. I did that because I noticed I was having Wifi issues - it was working but kept thinking it was off - I'd click it to turn it on and the button wouldn't go green, but I had signal in the Notification bar. Going to Recovery to clear cache showed it was now applying CSC-code as BTU instead of TGY, so SOMETHING worked when I was doing the PITs.
So, Phone Info shows my Region Code as BTU, my CSC country as UK/IRE and my CSC Country ISO as GBBut I have a mix of ROM info:
Bootloader: ZHUBMI7
Baseband: ZHUDMJ9
PDA: XXUDMK2
CSC: OXADMK2
So, PDA and CSC are from a UK MK2 I tried to use early on and failed with, while BL and BB are from the original HK MI7 (BL) and the HK MK1 I rooted with.
So my question is now, can I now flash a BTU or other normal ROM onto my phone, using the RDLV process to make sure I get root and don't trip Knox?
IIRC I think the process works up to MK2 (and certainly does to MK1 as that what I used originally) so I should be able to DL (say) XXUBMJ1 to use for the BL and use XXUDMK2 for the root process. (i.e. the same as I did using HK MI7 for the BL and HK MK1 for the root process)
3 questions:
1. Is it the PDA that determines the partition Hong Kong users have such problems with? Or is it the Bootloader?
2. Can anyone think of a reason why this would not work? (now my CSC is BTU)
3. Could I now use an Aussie ROM to run the RDLV process?
FeralFire said:
2nd link in my signature.
Follow it to step 6. Then flash whatever ROM you want. Make sure your phone is 32 gigs or more. Won't work on 16 gb version.
Click to expand...
Click to collapse
Thanks for the Reply.
For now I'd prefer to stay away from KK ROMs - too many people having issues, and the prevention of returning to 4.3 is, to me, a killer until Samsung get the bugs out. Given that many people are doing OK with KK, I think it is unlikely Samsung will do much about the bugs until a larger number of people have problems and start bombarding their support lines.
Plus, on 4.3 I have a very fast phone that gives more than 2 days use even with fairly heavy use (for me) and up to 4 days for light use. Why make an irreversible change when the phone is doing well already? For me the next step is custom recovery - I don't like not having a Nandroid BU and several times now after restoring apps I find I need to fix permissions - without custom recovery that means a laborious uninstall/reinstall from Play Store, one app at a time. Pisses me off...
I find it interesting that Samsung are clearly using users such as XDA members as their testing area, while at the same time shutting down the activities we like to do. (Custom ROMs etc) I say clearly using us because otherwise there is no excuse for the regularity of leaked ROMs - Samsung pass it on to us to try and I would bet, have staff watching us to see what issues we have.
So it seems a bit counter-productive to work so hard to lock the phones so we can't play with them.
Journyman16 said:
Thanks for the Reply.
For now I'd prefer to stay away from KK ROMs - too many people having issues, and the prevention of returning to 4.3 is, to me, a killer until Samsung get the bugs out. Given that many people are doing OK with KK, I think it is unlikely Samsung will do much about the bugs until a larger number of people have problems and start bombarding their support lines.
Plus, on 4.3 I have a very fast phone that gives more than 2 days use even with fairly heavy use (for me) and up to 4 days for light use. Why make an irreversible change when the phone is doing well already? For me the next step is custom recovery - I don't like not having a Nandroid BU and several times now after restoring apps I find I need to fix permissions - without custom recovery that means a laborious uninstall/reinstall from Play Store, one app at a time. Pisses me off...
I find it interesting that Samsung are clearly using users such as XDA members as their testing area, while at the same time shutting down the activities we like to do. (Custom ROMs etc) I say clearly using us because otherwise there is no excuse for the regularity of leaked ROMs - Samsung pass it on to us to try and I would bet, have staff watching us to see what issues we have.
So it seems a bit counter-productive to work so hard to lock the phones so we can't play with them.
Click to expand...
Click to collapse
You need the international pit file in your phone. Flashing the CSC file will put that pit in your phone. It won't touch the bootloader or the system files.
FeralFire said:
You need the international pit file in your phone. Flashing the CSC file will put that pit in your phone. It won't touch the bootloader or the system files.
Click to expand...
Click to collapse
Unfortunately, PIT's don't seem to come easy. As above I have about 4 of them I tried. There seems a bit of a disconnect between what the AP/CP/CSC are and what the files in a ROM are e.g. in XXUBMH1 there's boot.img, recovery.img, system.img.ext4, userdata.img.ext4, persdata.img.ext4, persist.img.ext4 and in XXUBMI7 there's sbl1.mbn, aboot.mbn, rpm.mbn, tz.mbn, sdi.mbn, NON-HLOS.bin, boot.img, recovery.img, system.img.ext4, modem.bin, cache.img.ext4, hidden.img.ext4
While I've been around a while now, this seems to be a blank spot for me at present - how do I flash a CSC? From reading it seems some ROM.s come with 4 or 5 files, e.g. see attachment - but I haven't been able to find one yet. (the one in the pic was hosted on Hotfiles which is now defunct thanks to the Almighty USA draconian control freaks. )
Update: I think I have found a copy of it so I can try that when it finishes DL'ing.
Other than that, anyone know of where there might be another such ROM to DL? Also if I am flashing a CSC file do I flash the PIT as well (i.e. at the same time) or do the PIT first?
Which Odin options get ticked for a PIT? I tried [F. Reset Time] [Re-Partition] [Auto Reboot] [Nand Erase All] previously and it didn't seem to work. I saw a recovery type post that suggested ticking [Phone EFS Clear] but seems to me that is a tick towards Brick - and the Recovery being offered was to a KK ROM anyway.
FeralFire said:
2nd link in my signature.
Follow it to step 6. Then flash whatever ROM you want. Make sure your phone is 32 gigs or more. Won't work on 16 gb version.
Click to expand...
Click to collapse
FeralFire said:
You need the international pit file in your phone. Flashing the CSC file will put that pit in your phone. It won't touch the bootloader or the system files.
Click to expand...
Click to collapse
I just looked at your post again - I realise I might have a wrong idea. Although the leaked ROM is KK, I was assuming flashing the CSC would upgrade my phone - is that the case or can I use your 6 steps just to change my PIT and then do the 4.3 RDLV process to have a root 4.3 phone?
Downloading it now - started with the torrent but that's running slow; I will let it run to completion to maybe help some others get it faster but I've got the Storage Cow one running as well. We'll see which one arrives first Either way I'll leave it seeding.
Journyman16 said:
I just looked at your post again - I realise I might have a wrong idea. Although the leaked ROM is KK, I was assuming flashing the CSC would upgrade my phone - is that the case or can I use your 6 steps just to change my PIT and then do the 4.3 RDLV process to have a root 4.3 phone?
Downloading it now - started with the torrent but that's running slow; I will let it run to completion to maybe help some others get it faster but I've got the Storage Cow one running as well. We'll see which one arrives first Either way I'll leave it seeding.
Click to expand...
Click to collapse
Yeah, you should be able to.
I tried flashing the MK2 ROM after flashing that CSC. It worked perfectly. But then I upgraded to kitkat. So I can't test JB stuff anymore.
FeralFire said:
Yeah, you should be able to.
I tried flashing the MK2 ROM after flashing that CSC. It worked perfectly. But then I upgraded to kitkat. So I can't test JB stuff anymore.
Click to expand...
Click to collapse
Well, it let me flash the vega BTU MK2 ROM but now there's a wifi problem. Still waiting for cygwin to download so I can RDLV on the XSA ROM. There seems to be some kind of conflict between BTU and Australian settings. Says to turn on wireless and actually finds my SSID's but then doesn't connect properly. le sigh...
Well it's been coming up to 24 hours with no phone but I seem to have found my way.
The problem seems to have been a mismatch between BL, CSC and PIT. In trying to get off the Hong Kong set up I wound up with a ZHU BL, BTU CSC and XSA CP and AP. It worked but I had no wifi. tried a few things to get it working and in trying to flash an XSA CSC (I think it was XSA) I got the Knox bit change. With no wifi I thought maybe the problem was the BUT-based CP needed changing. In trying to fix that, somehow I triggered Knox
I tried DL & Install of Omega 6 (it's a 4.3 - not ready to go KK yet) but although it completed nicely (so many ROM's got hidden or system errors in Odin) the phone didn't start. I tried installing Philz so I could run things from the extSDcard but an XSA wouldn't work nor would anything I had below MJ7. Last Phone Info view I had I still had a ZHU CP, even though AP and CSC were XSA-based.
Finally I got the MJ7 ROM from http://forum.xda-developers.com/sho...9005xxudmj7-pre-rooted-knox-free-odex-bl-free and it did the trick.
It's been a learning experience but I'd be happier if I knew for sure both what triggered the Knox bit (I was being very careful about it) and why some of the other ROM installs simply didn't work.
Resurrecting this one because I'm looking for info on flashing my 32G HK Note 3, but it came with KK pre-installed. So I'm not sure what differences I have to be aware of. Any tips?
For whoever still experiences issues with HK 32GB n9005 devices, After wasting half a day on that crap, i was able to flash N9005ZSUGOK2_N9005OZSGOK2_TGY from sammobile coupled with the PIT attached.
sm-n900
sm-900 and pit
Hi. I'll try to be as detailed as possible.
I have been using the Lollipop 5.0.1 I9505XXUHOA7 German ROM that got leaked early last month, and have just had a few niggling issues, like no silent mode.
So, I looked at SamMobile yesterday and found that there are later versions of Lollipop for the S4 that fixed things like silent mode. I obtained I9505XXUHOB7.
However, when using Odin to flash it to my phone, each and every time, it has gotten to the very end of system.img.ext4 (takes about 5 minutes), and then fails at the very end. I've tried a number of things including a different cable and different USB ports, flashing a new recovery and trying to reboot through that, and even obtaining the CSB_signed_Fusion3_EUR_0325_V2.pit file to Re-partition. At this stage, I don't care if I lose files. I keep most stuff backed up. Just really want my phone to be up and running again, and not too sure what to do.
When I flashed the I9505XXUHOA7, it came with Bootloader, PDA, Phone and CSC to use within Odin, whereas any of the newer ROMs don't seem to have anything but the .tar.md5 file to use in PDA.
Any help would be greatly appreciated. Thanks very much.
Mate, when you download the file in Sammobile you only get 1 .tar file.. it comes with everything.. not like the leaked OA7
1. try using the latest odin 10.6 i think, AP to flash Firmware
2. Reinstall drivers to your PC
3. Or try to redownload a firmware again.. latest is OC6... it might be a bad download too..
4. Refrain using .pit file.... no good at all! Specially for official firmware...
I always brick my phone before and i had no issues flashing diff firmwares from diff country
Did you try flashing the OA7 again? The leaked OA7 (4 files + pit) is a service firmware and should fix issues like these (just to make it running again). After success, you should try an other firmware f.e. OB8 (maybe a bad download?)
Was trying to use flashfire to retain root and upgrade to lollipop from 4.2.2 MF3 kernel (locked bootloader). After that it wouldn't get past the boot logo. I thought no biggie, but now that I have tried using ODIN probably 20 different times with it always failing at system.img I am losing hope.
I've tried numerous usb cables and ports and am running on a windows 8.1 PC. I have a complete set of MF3 tar files that I have been using and a pit file to restore the bootloader(?) after PDA fails. It seems there is always some sort of solution and am hoping that someone more experienced than me can give me some guidance? Please help, I just need this thing functioning again.
Have you tried flashing nb1? If not, I'd try that, and then upgrade to nj4 if you don't want to go to lollipop. Downloads and instructions here if you need it.
You can always try a different computer seems to have worked for me on one then more occasion also try using a box to do the flash for you if you know of someone that has a z3x box or octopus box they can probably help you out. or try using a different version of odin and if all else fails try using KIES (SMART SWITCH) which i do hate to recomend but seems to help people in these situations. about root what S4 do you have an I337 or the I337m and you can always flash TWRP and install GOLDENEYE (only if your the I337m variant. Hope this post helps you ill keep in eye on the post to see if i can further help you.
I have galaxy s5 stuck in download screen. I have been through several "tutorials " on fixing, with no luck. I'm having a hard time finding original firmware for this model. Any help would be appreciated, I have a pic of the screen with info on it, but couldn't figure out how to post here.
Flash the original firmware?
Blackmonjr said:
I have galaxy s5 stuck in download screen. I have been through several "tutorials " on fixing, with no luck. I'm having a hard time finding original firmware for this model. Any help would be appreciated, I have a pic of the screen with info on it, but couldn't figure out how to post here.
Click to expand...
Click to collapse
Here you can download the latest firmware update for that model:
https://www.sammobile.com/firmwares/galaxy-s5/SM-G900R7/ACG/download/G900R7WWU3CPL1/120072/
Seems like the SM-G900R7 is a carrier specific device only. I have no experience with those. But I suspect they flash with odin just like the other models.
Did a bit of searching cause I was interested. If you (by chance) want root, there is an auto-root created by chainfire.
There is also a current official lineageOS build (LOS 14.1 = Android N) for that variant by haggertk (was merged into klte build months ago).
So looking good for you I'd say if you get it running.
I've tried what I think is flashing the original firmware. Tried a different autoroot and nothing. I think I'm doing things right, but always manage to have some kind of small issue, e.g. Connecting phone to Odin, or flash not taking. If another process for flashing original firmware is out there that doesn't use Odin, it may work. Thanks for the responses.
Blackmonjr said:
I've tried what I think is flashing the original firmware. Tried a different autoroot and nothing. I think I'm doing things right, but always manage to have some kind of small issue, e.g. Connecting phone to Odin, or flash not taking. If another process for flashing original firmware is out there that doesn't use Odin, it may work. Thanks for the responses.
Click to expand...
Click to collapse
So what's the problem exactly? We need more info on what you want to accomplish and what you did (step by step) and what result you got.
Does Odin pick up your device? What file you tried to install (Link please!). What Odin log messages do you get? etc. etc.
Be as specific as possible. And go step by step! Try getting stock firmware to run first... no root, no custom recovery, no nothing.
Remove the battery for about a minute, boot directly to download mode via 3-button-combo, then try connecting to ODIN.