After installing any twrp img it just boots 1 time .. after rebooting my phone just revert backs to stock recovery .. Any solution for this ? I have tried every thing ..It was working fine when i was using oreo ..
Flash twrp than go to twrp and flash OFRP .. PBRP ANYONE.. CHOICE IS YOURS
Related
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Boot and recovery partitions
Sounds like you messed up boot and recovery sections. Since you can boot up successfully, you may try to flash back to ZUI which changes these two sections completely. If it's not a solution for you, I think the only way to repair is completely format including kernel, system and partitions. You can find the tutorial on Website.
...
you can fix it just use TOOL_ZUK_Z1_ENG_0.0.6
Try flashing COS 12.1 via fastboot.
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
Hi!! I've flashed the NucleaRom too and for a couple of weeks it worked just fine. However one day, out of nowhere, the phone, while still on and working, restarted itself and entered a bootloop. After a few days it restarted normally and lasted a couple of hours but then it all started again. The BIG issue here is that when the phone enters in this bootloop where it remains on for about 15 seconds, it does it either in the system or the recovery/fastboot. I've managed to install two other ROMs via TWRP, when it miraculously remained turned on, but the problem persisted.
Is there a chance your problem was similar? How did you manage to flash via QFIL? I can't enter into that "emergency" or "download mode" in order to flash.
Many thanks in advance
i think that the problem is in the bootloader itself you should try flashing the latest os u have used and instal ordinary unofical lineage nightly (you can find everywhere) by this way your bootloader will be updated to 7.1 after that you can install any software i was having same problem when trying to migrate to lineage os
unable to install Custom ROM's
hi ,,
even i had the same problem like recovery was not accepting any ROMS... if we flash it ll go to recovery again and again,
and later i have flashed CM 13 with image file,, it worked and gone to recovery and updated the update to lineage OS 14.1 with Gapps..
hope it might help u...
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
i am continuously on the boot loop! how to get rid of it?
plz help its been 4 hrs, i think i am in trouble! any possible solutions!!!!
U can try one thing.... Install cm13 with flash file and then restart - - & go to recovery select install update and select lineage 14 and G apps... I did like this . And it worked....
I put lineage 14.1 on my phone today , worked great , then I decided to factory reset the phone , now the phone constantly goes into a recovery boot loop back to TWRP , I am told that the new version of TWRP will fix this , I can find the image version of TWRP but not the .ZIP version....
Please advise how best to update my k3-50 phone to the latest version of twrp , I did try copying across the Twrp image file to my sd card , but twrp does not see the file as a Install file....help please.
Or even a version with the correct scatter file to use with SP tools...please
Doh , I have managed to update to 3.03 using twrp , had to click install image..............BUT my phone still reboots back to twrp every time help please !
Help I have even managed to install 3.1 for twrp , but still my phone is in constant loop back to twrp , I have tried to reinstall roms , it says it has installed correctly , but each time , reboots to twrp..........any way around this , maybe sideload a old rom to remove twrp or something along those lines.....help please...
justwondering said:
Help I have even managed to install 3.1 for twrp , but still my phone is in constant loop back to twrp , I have tried to reinstall roms , it says it has installed correctly , but each time , reboots to twrp..........any way around this , maybe sideload a old rom to remove twrp or something along those lines.....help please...
Click to expand...
Click to collapse
Had the same problem with another ROM some time ago.
The only thing that worked for me:
-Flash Stock-ROM through SPFlashTool
-Flash TWRP through SPFlashTool
-Reboot to TWRP
-Take a nandroid backup
-Wipe and install a new Custom-ROM.
All software you need is in this thread: https://forum.xda-developers.com/k3-note/general/organized-thread-lenovo-k3-note-k50-t3158522
After trying a total of 6 different roms
I'm back on LP stock rom
Nd now my twrp isn't flashing anything !
I tried switching versions but nothing !
Nd one thing more : when i flash newer version of twrp it successfully flashes it but after a reboot it switches back to previous version, nd it also flashes cwm nd philz but then my phone doesn't boots into recovery
CAN ANYONE TELL ME WHAT I AM SUFFERING WITH !?
FreMD98896 said:
After trying a total of 6 different roms
I'm back on LP stock rom
Nd now my twrp isn't flashing anything !
I tried switching versions but nothing !
Nd one thing more : when i flash newer version of twrp it successfully flashes it but after a reboot it switches back to previous version, nd it also flashes cwm nd philz but then my phone doesn't boots into recovery
CAN ANYONE TELL ME WHAT I AM SUFFERING WITH !?
Click to expand...
Click to collapse
Flash twrp 2.8.7 via flashify if your phone is rooted
ONEPLUS 5
6GB RAM
7.1.1
4.5.14 OOS
HELLO
Today i flashed TWRP to my device by fastboot method
Everything went well
I started TWRP and make a backup
But a few minutes ago i tried to enter the recovery mode (TWRP) again but it send me back to the stock OP recovery!
Strange ..
How can i solve the problem,, not first time to happen with me
Thanks
Abdulaziz6p said:
ONEPLUS 5
6GB RAM
7.1.1
4.5.14 OOS
HELLO
Today i flashed TWRP to my device by fastboot method
Everything went well
I started TWRP and make a backup
But a few minutes ago i tried to enter the recovery mode (TWRP) again but it send me back to the stock OP recovery!
Strange ..
How can i solve the problem,, not first time to happen with me
Thanks
Click to expand...
Click to collapse
You have to flash TWRP, enter TWRP and then reboot directly to Recovery. That way, TWRP will modify the system so it will not replace TWRP with stock recovery.
Flash TWRP;
Boot directly into TWRP;
Flash Magisk with TWRP.
Magisk should prevent the stock recovery from replacing TWRP.
elbuenzurdo said:
You have to flash TWRP, enter TWRP and then reboot directly to Recovery. That way, TWRP will modify the system so it will not replace TWRP with stock recovery.
Click to expand...
Click to collapse
I made the same
Flashed twrp then right away swipe to allow modification even i made backup.
Abdulaziz6p said:
I made the same
Flashed twrp then right away swipe to allow modification even i made backup.
Click to expand...
Click to collapse
you need to flash supersu or magisk right after flashing OOS to prevent OOS from overwriting the recovery with stock one, as mentioned above..
I wanted to flash resurrection remix
I had TWRP installed.. n dotos 1.2
Mistakenly i flashed the recovery file in the folder in which j8 update was placed ..not the TWRP recovery
Now m stuck on a different type of recover lineage os recovery not TWRP.
M not able to flash any zip , nor can I restore from backup.. tried Odin method to install original file but it gives error ..
Stuck now..
Please help me get out of this issue
Fahad_ahmad said:
I wanted to flash resurrection remix
I had TWRP installed.. n dotos 1.2
Mistakenly i flashed the recovery file in the folder in which j8 update was placed ..not the TWRP recovery
Now m stuck on a different type of recover lineage os recovery not TWRP.
M not able to flash any zip , nor can I restore from backup.. tried Odin method to install original file but it gives error ..
Stuck now..
Please help me get out of this issue
Click to expand...
Click to collapse
I commented what I would do: install with odin the last twrp with which allas made a backup and have it yet, install it and you put the backup, and if not install with odin a twrp 3.2.1 de vince and install one of your rom, I recommend RR6xx