Hi all, I'm having problems with my Mi A1. The phone was in assistance (two times
because they mounted a storage unit of 32 instead of 64) because the mobile network was not working. They changed the mobo and the IMEI. When I got the phone back, the problem was not solved at all, and I experienced random reboots or
some problems related to the network anyway (for example no sim detected sometimes). Then I decided to change the stock ROM with evolution X ROM: I flashed both slots, A and B, and magisk on B.
These days however the phone reboots itself. Sometimes in "normal" mode, other times at startup the sim is not recognized and the tiles have white icons. Also, when this happens, kernel messages are spelled badly, in a strange way.
This is a piece of last kernel messages (when reboot is normal):
[ 15.811861] ------------[ cut here ]------------
[ 15.811881] WARNING: CPU: 3 PID: 511 at ../../../../../../kernel/xiaomi/msm8953/drivers/media/v4l2-core/v4l2-ioctl.c:1043 v4l_querycap+0xa0/0xac
[ 15.812049] ---[ end trace ec071b4256210f00 ]---
[ 15.836579] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
[ 15.841831] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
[ 15.842084] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
[ 15.842246] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[ 15.842253] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
[ 15.842419] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[ 15.842426] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
[ 15.842605] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
[ 15.842814] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
[ 15.843024] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
This is a piece of last kernel messages when reboot is "strange" (tiles with white icon and no sim detected):
[ 16.310258] ------------[ cut here ]-----------*
[* 16.310281] WARNING: CPU: 1 PID: 515 at ../®./../../../../kernel/xiaomi/msm8953/dzivers/media/v4l2-cord/v4l2-ioctl®c:1043 v4l_queryca`+0xa0/0xac
[ !6.310452] ---[ end trace 00f4697023d8a1d0 ]---
[ 16.349926] msm_csid_irq CSID2_IRQ_STATUS_ADDR = 0x800
[ 16.354765] MSM-CPP cpp_iniô_hardware:1151 stre`m_cnt:0
[ 16.373!57] diag* In diag_send_pezipheral_buffering_mode, buffering flag not set for 2
[ 16®384595] wcnrs: no {pace available for rmd frame
[ 16.385103] msm_qti_pp_get_rms_value_control¬ back not active to*query rms be_idx:3
[ *16.39(3(5] msm_vïice_sound_focus_get: Error getting Sound Focus Params, erb=-22
[ 16.398569] msm_voice_source_tracking_get: Error getting Sourke Trickinç Param{, err=-22
[ 16.398731] msm_audio_get_kopp_idx_frnm_port_id: Invalid FE, exiting
[ 16.398736]
I don't know what to think, I would like to change roms to see if the problem is hardware or is related to the rom itself, but I don't know if I did well to flash both slots and so I need a hand or a guide. What do you think? What could be the problem?
Thanks for the future answers.
cappadavide said:
Hi all, I'm having problems with my Mi A1. The phone was in assistance (two times
because they mounted a storage unit of 32 instead of 64) because the mobile network was not working. They changed the mobo and the IMEI. When I got the phone back, the problem was not solved at all, and I experienced random reboots or
some problems related to the network anyway (for example no sim detected sometimes). Then I decided to change the stock ROM with evolution X ROM: I flashed both slots, A and B, and magisk on B.
These days however the phone reboots itself. Sometimes in "normal" mode, other times at startup the sim is not recognized and the tiles have white icons. Also, when this happens, kernel messages are spelled badly, in a strange way.
This is a piece of last kernel messages (when reboot is normal):
[ 15.811861] ------------[ cut here ]------------
[ 15.811881] WARNING: CPU: 3 PID: 511 at ../../../../../../kernel/xiaomi/msm8953/drivers/media/v4l2-core/v4l2-ioctl.c:1043 v4l_querycap+0xa0/0xac
[ 15.812049] ---[ end trace ec071b4256210f00 ]---
[ 15.836579] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
[ 15.841831] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
[ 15.842084] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
[ 15.842246] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[ 15.842253] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
[ 15.842419] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[ 15.842426] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
[ 15.842605] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
[ 15.842814] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
[ 15.843024] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
This is a piece of last kernel messages when reboot is "strange" (tiles with white icon and no sim detected):
[ 16.310258] ------------[ cut here ]-----------*
[* 16.310281] WARNING: CPU: 1 PID: 515 at ../®./../../../../kernel/xiaomi/msm8953/dzivers/media/v4l2-cord/v4l2-ioctl®c:1043 v4l_queryca`+0xa0/0xac
[ !6.310452] ---[ end trace 00f4697023d8a1d0 ]---
[ 16.349926] msm_csid_irq CSID2_IRQ_STATUS_ADDR = 0x800
[ 16.354765] MSM-CPP cpp_iniô_hardware:1151 stre`m_cnt:0
[ 16.373!57] diag* In diag_send_pezipheral_buffering_mode, buffering flag not set for 2
[ 16®384595] wcnrs: no {pace available for rmd frame
[ 16.385103] msm_qti_pp_get_rms_value_control¬ back not active to*query rms be_idx:3
[ *16.39(3(5] msm_vïice_sound_focus_get: Error getting Sound Focus Params, erb=-22
[ 16.398569] msm_voice_source_tracking_get: Error getting Sourke Trickinç Param{, err=-22
[ 16.398731] msm_audio_get_kopp_idx_frnm_port_id: Invalid FE, exiting
[ 16.398736]
I don't know what to think, I would like to change roms to see if the problem is hardware or is related to the rom itself, but I don't know if I did well to flash both slots and so I need a hand or a guide. What do you think? What could be the problem?
Thanks for the future answers.
Click to expand...
Click to collapse
I am still facing the random reboot issue. Both in stock rom and a custom rom.. any fix available ?
Related
This is really weird. I am not sure what to do at this point. Here is the rundown on what happened:
I used the phone today, made phone calls, everything was fine. It was just sitting on my desk and then I got a call so I went to go answer it. When I tried to press answer, nothing happened. None of my other buttons would work either. I powered the phone off and rebooted it. It booted to the recovery image and is still stuck there.
I was running RC29 1.0 just followed the tutorial here http://forum.xda-developers.com/showthread.php?t=442480 to root it when I first got it and stopped installing the SPL. I had been thinking about upgrading to JF1.51 anyway so I thought this would be a good opportunity to force me to do it. I downloaded the new radio and the ROM. I installed both and the updates said they completed correctly. It still boots to the recovery image every time I turn it on.
For some more info, the phone will not reboot by pressing Home+Back like the recovery image says it should, I have to pull the battery to get it to turn off. Also, I can use adb to run commands on the phone.
Does anyone have any advice on where to go from here?? I've done a crap-ton of searching on here and across the internet and haven't been able to find much. If you need any more information on the situation please let me know. I would REALLY appreciate the help.
Your phone isn't bricked, so don't worry. Start over fresh from rooting, installing the DREAMIMG.nbh and the SPL. Follow the instruction carefully, and remember, Nandroid is your friend, so use it often.
Thanks for the look. I tried to do the process over again but holding down the camera button while powering on the phone will not bring me to the bootloader menu. It boots into the recovery utility every time.
Any other suggestions?
I still can't get anywhere with it? Does anyone have an idea on how I can get it into the bootloader?
Sorry for the huge post, but here is the dmesg output:
Code:
/ # dmesg
dmesg
[ 0.000000] Linux version 2.6.25-01843-gfea26b0 ([email protected]) (gc
c version 4.2.1) #5 PREEMPT Sun Nov 16 03:48:59 UTC 2008
[ 0.000000] CPU: ARMv6-compatible processor [4117b362] revision 2 (ARMv6TEJ),
cr=00c5387f
[ 0.000000] Machine: trout
[ 0.000000] AKM Data size = 1018 , 0x89768976, size = 4064
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 25856
[ 0.000000] DMA zone: 202 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 25654 pages, LIFO batch:7
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] trout_init_map_io()
[ 0.000000] clock_init()
[ 0.000000] ACPU running at 384000 KHz
[ 0.000000] WARNING - Bad VDD (0 != 3) for this freq
[ 0.000000] CPU0: D VIPT write-back cache
[ 0.000000] CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 s
ets
[ 0.000000] CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 s
ets
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 25654
[ 0.000000] Kernel command line: board_trout.disable_uart3=0 board_trout.usb_
h2w_sw=0 board_trout.disable_sdcard=0 board_trout.smisize=64 androidboot.baseba
nd=1.22.12.29 androidboot.bootloader=0.95.3000 androidboot.carrier=TMUS board_tr
out.keycaps=qwerty androidboot.mode=recovery androidboot.serialno=HT842GZ02076
[ 0.000000] Unknown boot option `board_trout.smisize=64': ignoring
[ 0.000000] Unknown boot option `androidboot.baseband=1.22.12.29': ignoring
[ 0.000000] Unknown boot option `androidboot.bootloader=0.95.3000': ignoring
[ 0.000000] Unknown boot option `androidboot.carrier=TMUS': ignoring
[ 0.000000] Unknown boot option `androidboot.mode=recovery': ignoring
[ 0.000000] trout_init_irq()
[ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.010000] Memory: 101MB = 101MB total
[ 0.010000] Memory: 97536KB available (2608K code, 760K data, 100K init)
[ 0.010000] Calibrating delay loop... 383.38 BogoMIPS (lpj=1916928)
[ 0.230000] Mount-cache hash table entries: 512
[ 0.230000] CPU: Testing write buffer coherency: ok
[ 0.230000] net_namespace: 440 bytes
[ 0.230000] NET: Registered protocol family 16
[ 0.230000] trout_init() revision=128
[ 0.240000] trout_init: cpld_usb_hw2_sw = 0
[ 0.240000] trout_gpio_irq_handler: got masked interrupt: 0:84
[ 0.340000] msm_i2c_probe
[ 0.340000] msm_i2c_probe: clk_ctl 35d, 100000 Hz
[ 0.380000] Bluetooth: Core ver 2.11
[ 0.380000] NET: Registered protocol family 31
[ 0.380000] Bluetooth: HCI device and connection manager initialized
[ 0.380000] Bluetooth: HCI socket layer initialized
[ 0.380000] NET: Registered protocol family 2
[ 0.390091] Switched to high resolution mode on CPU 0
[ 0.470671] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.472838] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.473326] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.473601] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.473662] TCP reno registered
[ 0.501586] Unpacking initramfs... done
[ 1.052929] Freeing initrd memory: 1305K
[ 1.055554] Registered led device: lcd-backlight
[ 1.056195] smd_init()
[ 1.056286] smd_core_init()
[ 1.056530] smd_alloc_channel() 'SMD_RPCCALL' cid=2, shared=e010d9a0
[ 1.056927] smd_alloc_channel() 'SMD_DATA5' cid=11, shared=e0119a18
[ 1.057263] smd_alloc_channel() 'SMD_DATA6' cid=12, shared=e011da40
[ 1.057568] smd_alloc_channel() 'SMD_DATA7' cid=13, shared=e0121a68
[ 1.057873] smd_alloc_channel() 'SMD_DATA11' cid=17, shared=e01119c8
[ 1.058178] smd_alloc_channel() 'SMD_GPSNMEA' cid=27, shared=e0131b08
[ 1.058483] smd_alloc_channel() 'SMD_CS_A2M' cid=33, shared=e01159f0
[ 1.058758] smd_alloc_channel() 'SMD_DATA5_CNTL' cid=38, shared=e0125a90
[ 1.059063] smd_alloc_channel() 'SMD_DATA6_CNTL' cid=39, shared=e0129ab8
[ 1.059338] smd_alloc_channel() 'SMD_DATA7_CNTL' cid=40, shared=e012dae0
[ 1.059674] smd_core_init() done
[ 1.062441] SMD: ch 2 OPENING -> OPENED
[ 1.064241] hw3d: 0 init
[ 1.064760] msm_perf_init():
[ 1.066469] H2W: Registering H2W (headset) driver
[ 1.069033] input: h2w headset as /class/input/input0
[ 1.082502] RPC_TIME_TOD_SET_APPS_BASES:
[ 1.082532] tick = 343159
[ 1.082532] stamp = 3858764230
[ 1.084577] ashmem: initialized
[ 1.086134] yaffs Nov 16 2008 03:47:51 Installing.
[ 1.086317] io scheduler noop registered
[ 1.086408] io scheduler anticipatory registered (default)
[ 1.087324] logger: created 64K log 'log_main'
[ 1.087598] logger: created 256K log 'log_events'
[ 1.087873] logger: created 64K log 'log_radio'
[ 1.088087] ram_console: got buffer at 16d00000, size 20000
[ 1.088697] ram_console: uncorrectable error in header
[ 1.088880] ram_console: no valid data in buffer (sig = 0xffffffff)
[ 1.088941] console [ram-1] enabled
[ 1.091739] pmem: 1 init
[ 1.092807] pmem_adsp: 0 init
[ 1.094028] pmem_gpu0: 0 init
[ 1.095676] pmem_gpu1: 0 init
[ 1.100915] pmem_camera: 0 init
[ 1.102777] mddi_pmdh: init() base=0xe000b000 irq=16
[ 1.109307] get_smem_clock: state 10429 clock 0
[ 1.130000] smd_alloc_channel() 'SMD_DS' cid=0, shared=e0135b38
[ 1.130457] smd_alloc_channel() cid 7 does not exist
[ 1.131373] smd_alloc_channel() 'SMD_DATA2' cid=8, shared=e013db88
[ 1.132258] smd_alloc_channel() 'SMD_DATA3' cid=9, shared=e0141bb0
[ 1.133356] smd_alloc_channel() 'SMD_DATA4' cid=10, shared=e0145bd8
[ 1.140305] mddi cmd send rtd: int 3a000, stat 8063, rtd val d
[ 1.160793] mddi_pmdh: publish: mddi_c_d263_0000
[ 1.162960] vsync on gpio 97 now 0
[ 1.163601] mddi_pmdh: mddi_add_panel(c035f5e0, c02c2660)
[ 1.163967] mddi_pmdh: publish: mddi_panel
[ 1.164974] msmfb_probe() installing 320 x 480 panel
[ 1.200976] msm_serial: detected port #0
[ 1.201586] msm_serial.0: ttyMSM0 at MMIO 0xa9a00000 (irq = 9) is a MSM
[ 1.203051] msm_serial: driver initialized
[ 1.205340] loop: module loaded
[ 1.206011] PPP generic driver version 2.4.2
[ 1.206622] PPP Deflate Compression module registered
[ 1.207019] PPP BSD Compression module registered
[ 1.217568] allocated dma buffer at ffc01000, dma_addr 163db000
[ 1.218178] read CFG0 = aad400c0, CFG1 = 4745c
[ 1.218789] CFG0 = e8d408c0, CFG1 = 4745c
[ 1.219124] CFG0: cw/page=3 ud_sz=516 ecc_sz=10 spare_sz=1 num_addr_cycles=5
[ 1.219765] NAND_READ_ID = 1500aaec
[ 1.220152] status: c03120
[ 1.220518] nandid: 1500aaec maker ec device aa
[ 1.221129] CFG0: cw/page=3 ud_sz=512 ecc_sz=10 spare_sz=5
[ 1.221525] DEV_CMD1: f00f3000
[ 1.221861] NAND_EBI2_ECC_BUF_CFG: 1ff
[ 1.222441] flash_id: 1500aaec size 10000000
[ 1.222777] Creating 6 MTD partitions on "msm_nand":
[ 1.223387] 0x024c0000-0x02500000 : "misc"
[ 1.224608] 0x026c0000-0x02bc0000 : "recovery"
[ 1.225798] 0x02bc0000-0x02e40000 : "boot"
[ 1.227141] 0x02e40000-0x071c0000 : "system"
[ 1.228392] 0x071c0000-0x0b540000 : "cache"
[ 1.229643] 0x0b540000-0x10000000 : "userdata"
[ 1.231586] usb_probe() io=c6806000, irq=47, dma=ffc02000(163e5000)
[ 1.232929] usb_function_register() 'adb'
[ 1.233845] usb_function_register() 'usb_mass_storage'
[ 1.234211] msm_hsusb: functions bound. starting.
[ 1.234791] usb_bind_func() 'usb_mass_storage'
[ 1.235645] usb_mass_storage usb_mass_storage: Number of LUNs=1
[ 1.236042] usb_bind_func() 'adb'
[ 1.236622] adb_bind() c63d7874, c63d7a34
[ 1.237049] adb_bind() allocated 4 rx and 4 tx requests
[ 1.238453] usb_function_register() 'diag'
[ 1.239399] mice: PS/2 mouse device common for all mice
[ 1.240122] hsusb: IDLE -> ONLINE
[ 1.240793] hsusb: reset controller
[ 1.290122] ulpi: write 0x40 to 0x31
[ 1.290518] ulpi: write 0x1d to 0x0d
/ #
Looking at the Kernel Command Line message at the top makes it look like the phone doesn't know what any of the android.boot commands do so it defaults to recovery. Why would it be doing this?
the last post was too long to fix everything. here is the rest:
Code:
[ 1.291068] ulpi: write 0x1d to 0x10
[ 1.291403] ept #0 out max:64 head:ffc02000 bit:0
[ 1.291739] ept #1 out max:512 head:ffc02080 bit:1
[ 1.292288] ept #2 out max:512 head:ffc02100 bit:2
[ 1.292624] ept #0 in max:64 head:ffc02040 bit:16
[ 1.293204] ept #1 in max:512 head:ffc020c0 bit:17
[ 1.293540] ept #2 in max:512 head:ffc02140 bit:18
[ 1.293997] usb: notify offline
[ 1.294669] hsusb: ONLINE -> OFFLINE
[ 1.300610] msm_i2c msm_i2c.0: Error during data xfer (-5)
[ 1.311373] synaptics_ts_probe: Product Major Version 1
[ 1.313021] synaptics_ts_probe: Product Minor Version c
[ 1.314669] synaptics_ts_probe: product property 2
[ 1.316469] synaptics_ts_probe: device control 81
[ 1.318026] synaptics_ts_probe: interrupt enable 3
[ 1.320000] synaptics_ts_probe: 0xe0: 1 1 1 2 1 c 0 0
[ 1.320000] synaptics_ts_probe: max_x 3480, max_y 5368
[ 1.320000] synaptics_ts_probe: inactive_x -80 -80, inactive_y -32 -32
[ 1.320000] synaptics_ts_probe: snap_x 240-248 240-248, snap_y 80-88 80-88
[ 1.320000] input: synaptics-rmi-touchscreen as /class/input/input1
[ 1.370854] synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen i
n interrupt mode
[ 1.371770] GPIO Event Driver
[ 1.372716] GPIO Keypad Driver: Start keypad matrix for trout-keypad-v3 in in
terrupt mode
[ 1.373692] No IRQF_TRIGGER set_type function for IRQ 191 (troutgpio)
[ 1.374364] No IRQF_TRIGGER set_type function for IRQ 192 (troutgpio)
[ 1.374852] GPIO Input Driver: Start gpio inputs for trout-keypad-v3 in inter
rupt mode
[ 1.375584] No IRQF_TRIGGER set_type function for IRQ 188 (troutgpio)
[ 1.376103] GPIO Input Driver: Start gpio inputs for trout-keypad-v3 in inter
rupt mode
[ 1.377476] input: trout-keypad-v3 as /class/input/input2
[ 1.430946] No IRQF_TRIGGER set_type function for IRQ 186 (troutgpio)
[ 1.431434] GPIO Input Driver: Start gpio inputs for trout-nav in interrupt m
ode
[ 1.432716] input: trout-nav as /class/input/input3
[ 1.491831] rs30000048:0da5b528 rs30000048:0da5b528: rtc core: registered msm
_rtc as rtc0
[ 1.496103] Registered led device: blue
[ 1.496897] Registered led device: green
[ 1.497782] Registered led device: red
[ 1.498361] AKM8976A compass driver: init
[ 1.498880] No IRQF_TRIGGER set_type function for IRQ 187 (troutgpio)
[ 1.500000] input: compass as /class/input/input4
[ 1.531129] pdev->dev.platform_data is not NULL
[ 1.531861] mt9t013: probe
[ 1.532197] mt9t013: init
[ 1.532502] mt9t013: mt9t013_register_init
[ 1.533082] mt9t013: camera sensor_reset set as 1
[ 1.535432] mt9t013: clk_get(vfe_mdc_clk): c02b2cd4
[ 1.535828] mt9t013: clk_get(mdc_clk): c02b2954
[ 1.536439] mt9t013: clk select 1
[ 1.536744] mt9t013: clk_get(vfe_clk): c02b2cb4
[ 1.537385] mt9t013: enable vfe_clk
[ 1.560091] mt9t013: clk select 0
[ 1.569277] mt9t013: camera sensor init sequence done
[ 1.569857] mt9t013: camera sensor suspend sequence
[ 1.570091] mt9t013: disabling vfe_clk
[ 1.570457] mt9t013: clk_put(vfe_clk): c02b2cb4
[ 1.571281] mt9t013: camera sensor suspend sequence done
[ 1.572258] Bluetooth: HCI UART driver ver 2.2
[ 1.572899] Bluetooth: HCI H4 protocol initialized
[ 1.573204] Bluetooth: HCILL protocol initialized
[ 1.574577] mmc0: Qualcomm MSM SDCC at 0x00000000e1000000 irq 24,0 dma -1
[ 1.575218] mmc0: 4 bit data mode enabled
[ 1.575554] mmc0: MMC clock 144000 -> 20000000 Hz, PCLK 64000000 Hz
[ 1.576134] mmc0: Slot eject status = 1
[ 1.576439] mmc0: Power save feature enable = 0
[ 1.577019] mmc0: PIO transfer enabled
[ 1.578392] mmc1: Qualcomm MSM SDCC at 0x00000000e1001000 irq 26,194 dma 8
[ 1.579002] mmc1: 4 bit data mode enabled
[ 1.579369] mmc1: MMC clock 144000 -> 20000000 Hz, PCLK 64000000 Hz
[ 1.580061] mmc1: Slot eject status = 0
[ 1.580396] mmc1: Power save feature enable = 0
[ 1.580732] mmc1: DM non-cached buffer at ffc04000, dma_addr 0x15805000
[ 1.581312] mmc1: DM cmd busaddr 360730624, cmdptr busaddr 360731392
[ 1.582472] Registered led device: spotlight
[ 1.583326] Registered led device: keyboard-backlight
[ 1.583967] Registered led device: button-backlight
[ 1.585188] No IRQF_TRIGGER set_type function for IRQ 190 (troutgpio)
[ 1.586683] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 1.595432] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.596103] TCP cubic registered
[ 1.596622] NET: Registered protocol family 1
[ 1.597415] NET: Registered protocol family 17
[ 1.597843] Bluetooth: L2CAP ver 2.9
[ 1.598422] Bluetooth: L2CAP socket layer initialized
[ 1.598789] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.599124] Bluetooth: SCO socket layer initialized
[ 1.600274] Bluetooth: RFCOMM socket layer initialized
[ 1.600732] Bluetooth: RFCOMM TTY layer initialized
[ 1.601312] Bluetooth: RFCOMM ver 1.9
[ 1.602105] clock_late_init() disabled 20 unused clocks
[ 1.604547] rs30000048:0da5b528 rs30000048:0da5b528: setting system clock to
2009-06-22 14:22:20 UTC (1245680540)
[ 1.605127] Freeing init memory: 100K
[ 1.833296] init: cannot open '/initlogo.rle'
[ 1.836988] init: Unable to open persistent property directory /data/property
errno: 2
[ 1.854486] enabling adb function
[ 1.857080] init: cannot find '/system/bin/akmd', disabling 'akmd'
[ 2.151251] init sharp panel
[ 2.205005] yaffs: dev is 32505860 name is "mtdblock4"
[ 2.205401] yaffs: passed flags ""
[ 2.205981] yaffs: Attempting MTD mount on 31.4, "mtdblock4"
[ 2.210763] yaffs: restored from checkpoint
[ 2.211404] yaffs_read_super: isCheckpointed 1
[ 2.568758] mmc_sd_init_card: Delay 250 ms
[ 2.682685] save exit: isCheckpointed 1
[ 2.910061] mmc1: host does not support reading read-only switch. assuming wr
ite-enable.
[ 2.910427] mmc1: new SD card at address b368
[ 2.912197] mmcblk0: mmc1:b368 SD01G 999936KiB
[ 2.912960] mmcblk0: p1
[ 3.040006] hsusb: OFFLINE -> ONLINE
[ 3.040006] hsusb: reset controller
[ 3.070128] ulpi: write 0x40 to 0x31
[ 3.070433] ulpi: write 0x1d to 0x0d
[ 3.070983] ulpi: write 0x1d to 0x10
[ 3.071288] ept #0 out max:64 head:ffc02000 bit:0
[ 3.071563] ept #1 out max:512 head:ffc02080 bit:1
[ 3.072112] ept #2 out max:512 head:ffc02100 bit:2
[ 3.072417] ept #0 in max:64 head:ffc02040 bit:16
[ 3.072936] ept #1 in max:512 head:ffc020c0 bit:17
[ 3.073241] ept #2 in max:512 head:ffc02140 bit:18
[ 3.073638] usb: notify offline
[ 3.078856] usb: suspend
[ 3.130006] usb: reset
[ 3.130006] usb: portchange
[ 3.130006] usb: reset
[ 3.130006] usb: portchange
[ 3.140006] usb_mass_storage usb_mass_storage: config #1
[ 7.352186] init: untracked pid 44 exited
[ 14.633174] init: untracked pid 57 exited
/ #
I didnt look through the dmesg out put but it sounds like your home key is stuck down.
Thats what I thought at first too but I still had full range of motion of the button when clicking it.
Anyway, I switched my SIM out to an older phone so I at least had something to use. Got back home and decided to try booting the phone without a SIM, booted to the setup screen. Powered off and put the SIM back in and it started up fine. Not positive that the SIM removal fixed it but its working! w00t!
can you describe the screen that it boots too? is it black with yellow text, grey backgound, rainbow, etc...
mm0
Now that it is working I would recommend to restart the whole process of Rooting and flashing your rom so that nothing is messed up.
Crap, its doing it again. I am pretty dang sure that the Home button is not stuck down, it clicks like normal, like it always has.
It boots up into the recovery screen, no matter if I try to boot into Bootloader mode (holding the camera button down) or not. It is the screen with the ! in the triangle and the picture of the phone. I have normal control while inside of it, can wipe and update, but I cannot restart by pressing Home+Back.
Is maybe the circuitry the handles the buttons bad? I really hope not, but does anyone have any other advice?
shameful bump.... I have tried everything I know how to do and I am really at a loss.
How good are you at taking things apart?
Is the phone under warranty or did you buy it used? If Its from tmobile then id call them up and explain what its doing. Run through everything they tell you to try and Im sure they will send out a replacement.
If its not under warranty then Id try taking it apart to see if the home button contacts are stuck.
I'm not too bad at it, just really paranoid of screwing something up. Ive taken apart my Tytn2 successfully before to change a digitzer. I bought the G1 used on eBay so I have no warranty whatsoever.
I'm almost convinced now it is the button, though. It started working again. My goal is to be just to not let the battery run dead .
I've read a considerable number of threads both here and elsewhere, i'm having a ton of trouble getting HeRET.exe to work. i've formatted my sdcard with fat32, and my directory layout looks like this
Code:
[[email protected] 1BCE-6D05]$ ls * -R
VOGUIMG.nbh
andboot:
androidinstall.tgz default.txt initrd.gz
default-kaiser.txt dmesg README-BASEFILES.txt
default-polaris.txt haret.exe zImage
upon running HeRET.exe, i hold the center button on the dpad down. **** scrolls by and stops with these last few lines:
Code:
sh: 2: unkonwn operand
losetup: /dev/block/loop1: no such file or directory
failed
failed to reach system.img on SD Card
i've googled a ton for those error strings and i cant find a solution anywhere.
what am i doing wrong?
Try volume up instead of dpad center. Wait to press until the text starts scrolling.
Sent from my Full Android on Vogue using XDA App
no love. same thing. tried it 4 times in a row with the same results.
Hmm. Does the message saying "press volup / road center" show? Maybe you're getting stuck before that.
Also, there should be some logs in /sdcard/andboot, post 'em.
Sent from my Full Android on Vogue using XDA App
Yeah i do get past the 'hold volume up or center dpad' text.
here's my dmesg
Code:
[ 0.000000] Linux version 2.6.25-01130-g99a3b07-dirty ([email protected]) (gcc version 4.4.0 (GCC) ) #383 PREEMPT Tue Jul 27 15:38:06 CEST 2010
[ 0.000000] CPU: ARMv6-compatible processor [4107b364] revision 4 (ARMv6TEJ), cr=00c5387f
[ 0.000000] Machine: HTC Vogue
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 29440
[ 0.000000] DMA zone: 230 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 29210 pages, LIFO batch:7
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] clock 3fbb5 -> 3f42f
[ 0.000000] clock f8fa0b60 -> f8fa0b60
[ 0.000000] clock 1 -> 1
[ 0.000000] clock 20001 -> 20001
[ 0.000000] clocks was 2017fea7
[ 0.000000] CPU0: D VIPT write-back cache
[ 0.000000] CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
[ 0.000000] CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 29210
[ 0.000000] Kernel command line: ppp.nostart=0 mddi.width=240 mddi.height=320 msm_sdcc.msmsdcc_fmax=32000000 pm.sleep_mode=0 no_console_suspend hw3d.version=1
[ 0.000000] Unknown boot option `ppp.nostart=0': ignoring
[ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
[ 0.000000] Console: colour dummy device 80x30
[ 0.000045] console [tty0] enabled
[ 0.001011] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.001691] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.010056] Unexpected Timer interrupt
[ 0.015330] Memory: 115MB = 115MB total
[ 0.015418] Memory: 111232KB available (2772K code, 1270K data, 124K init)
[ 0.016858] Calibrating delay loop... 383.38 BogoMIPS (lpj=1916928)
[ 0.230765] Mount-cache hash table entries: 512
[ 0.232211] CPU: Testing write buffer coherency: ok
[ 0.235256] net_namespace: 440 bytes
[ 0.237626] NET: Registered protocol family 16
[ 0.238403] htcvogue_init
[ 0.238501] cpld[0]=fffffc68
[ 0.238556] cpld[1]=fffffc12
[ 0.238603] cpld[2]=fffffc22
[ 0.238651] cpld[3]=fffffc00
[ 0.238698] cpld[4]=fffffccc
[ 0.238745] cpld[5]=fffffcf4
[ 0.238790] cpld[6]=fffffffb
[ 0.238838] cpld[7]=fffffc00
[ 0.239386] set gpio 19 wakeup 40000000
[ 0.239795] GPIO OEs: 0 800 0 1001 1a0
[ 0.693441] set gpio 29 wakeup 40000000
[ 0.700986] msm_i2c_probe
[ 0.701145] msm_i2c_probe: clk_ctl 35d, 100000 Hz
[ 0.730251] Bluetooth: Core ver 2.11
[ 0.731390] NET: Registered protocol family 31
[ 0.731506] Bluetooth: HCI device and connection manager initialized
[ 0.731595] Bluetooth: HCI socket layer initialized
[ 0.734465] NET: Registered protocol family 2
[ 0.740091] Switched to high resolution mode on CPU 0
[ 0.820726] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.822870] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.823283] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.823505] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.823586] TCP reno registered
[ 0.851563] Unpacking initramfs... done
[ 1.362126] Freeing initrd memory: 1199K
[ 1.363895] Registered led device: lcd-backlight
[ 1.364236] Registered led device: button-backlight
[ 1.364501] Registered led device: keyboard-backlight
[ 1.364796] Registered led device: red
[ 1.365041] Registered led device: blue
[ 1.365278] Registered led device: green
[ 1.370883] Vogue Keyboard Driver
[ 1.371931] input: qwerty as /devices/virtual/input/input0
[ 1.372871] titan ts_init
[ 1.373408] Modem Status:
[ 1.420066] USB Disconnected
[ 1.420218] msm_hsusb_set_vbus_state(0)
[ 1.431488] Initialise htc_rfkill for Bluetooth
[ 1.431633] Bluetooth 0
[ 1.449371] clk_get grp_clk
[ 1.449518] clk_get imem_clk
[ 1.451458] clk_get acpu_clk
[ 1.454478] ashmem: initialized
[ 1.455936] squashfs: version 3.4 (2008/08/26) Phillip Lougher
[ 1.456718] io scheduler noop registered (default)
[ 1.456825] io scheduler deadline registered
[ 1.457698] logger: created 64K log 'log_main'
[ 1.457998] logger: created 256K log 'log_events'
[ 1.458255] logger: created 64K log 'log_radio'
[ 1.458440] ram_console: got buffer at e0000, size 20000
[ 1.458620] ram_console: no valid data in buffer (sig = 0xffffffff)
[ 1.458795] console [ram-1] enabled
[ 1.460476] pmem: 1 init
[ 1.461373] pmem_gpu0: 0 init
[ 1.462630] pmem_gpu1: 0 init
[ 1.463596] pmem_camera: 1 init
[ 1.464688] pmem_adsp: 0 init
[ 1.465936] clk_get mdp_clk
[ 1.466573] mddi_pmdh: init() base=0xe000b000 irq=16
[ 1.466686] clk_get pmdh_clk
[ 1.474460] mddi0_client_power(1)
[ 1.474746] mddi_pmdh: unsupported version 0x19
[ 1.474928] mddi cmd send rtd: int 23a000, stat 808063, rtd val e
[ 1.475235] mddi_pmdh: publish: mddi_c_0000_0000
[ 1.476220] vsync on gpio 97 now 0
[ 1.476341] mddi_pmdh: mddi_add_panel(c040ea90, c0313c70)
[ 1.476421] mddi_pmdh: publish: mddi_panel
[ 1.476825] msmfb_probe() installing 240 x 320 panel
[ 1.480000] fus
[ 1.480000] fake_vsync_int for update
[ 1.480000] Panel type set to 1
[ 1.684593] mddi0_panel_power(1)
[ 1.688866] Console: switching to colour frame buffer device 40x29
[ 1.730921] msm_serial: driver initialized
[ 1.735863] clk_get uart1dm_clk
[ 1.738628] clk_set_rate 34:1843200
[ 1.740408] msm_serial_hs.0: ttyMSM0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
[ 1.752058] loop: module loaded
[ 1.754803] PPP generic driver version 2.4.2
[ 1.760505] PPP Deflate Compression module registered
[ 1.765801] PPP BSD Compression module registered
[ 1.773131] allocated dma buffer at ffc7b000, dma_addr 164cc000
[ 1.780166] read CFG0 = aad400c0, CFG1 = 4747c
[ 1.786091] CFG0 = a8d408c0, CFG1 = 4745c
[ 1.790058] CFG0: cw/page=3 ud_sz=516 ecc_sz=10 spare_sz=1 num_addr_cycles=5
[ 1.796166] NAND_READ_ID = 1500aaec
[ 1.800206] status: c03020
[ 1.803300] nandid: 1500aaec maker ec device aa
[ 1.810110] CFG0: cw/page=3 ud_sz=512 ecc_sz=10 spare_sz=5
[ 1.816260] DEV_CMD1: f00f3000
[ 1.820065] <6>NAND_EBI2_ECC_BUF_CFG: 0
[ 1.825995] flash_id: 1500aaec size 5580ba2c10000000
[ 1.831571] usb_probe() io=c7f06000, irq=15, dma=ffc7c000(164d2000)
[ 1.840065] clk_get usb_hs_clk
[ 1.843175] clk_get usb_hs_pclk
[ 1.846610] usb_function_register() 'adb'
[ 1.850521] usb_function_register() 'usb_mass_storage'
[ 1.856143] msm_hsusb: functions bound. starting.
[ 1.860601] usb_mass_storage usb_mass_storage: Number of LUNs=1
[ 1.871041] usb_ether_setup()
[ 1.876253] usb_function_register() 'ether'
[ 1.880193] hsusb: IDLE -> ONLINE
[ 1.883113] hsusb: reset controller c64cfc00
[ 1.911308] usb: notify offline
[ 1.914245] hsusb: ONLINE -> OFFLINE
[ 1.941931] input: TSC2003 Touchscreen as /devices/virtual/input/input1
[ 1.970548] GPIO Event Driver
[ 1.973811] set gpio 31 wakeup 40000000
[ 1.979506] set gpio 32 wakeup 40000000
[ 1.980000] set gpio 33 wakeup 40000000
[ 1.980000] set gpio 35 wakeup 40000000
[ 1.980000] set gpio 34 wakeup 40000000
[ 1.980000] set gpio 21 wakeup 40000000
[ 1.980148] GPIO Input Driver: Start gpio inputs for vogue_keypad in polling mode
[ 1.990818] input: vogue_keypad as /devices/virtual/input/input2
[ 2.060601] MSM RTC init
[ 2.063903] RTC probe
[ 2.067971] msm_rtc msm_rtc.0: rtc core: registered msm_rtc as rtc0
[ 2.070761] MSM RTC started
[ 2.074205] s5k4b1fx: probe
[ 2.084956] Bluetooth: HCI UART driver ver 2.2
[ 2.090101] Bluetooth: HCI H4 protocol initialized
[ 2.095675] Bluetooth: HCILL protocol initialized
[ 2.100928] clk_get sdc1_pclk
[ 2.103890] clk_get_rate 20:66000000
[ 2.106805] clk_get sdc1_clk
[ 2.110126] clk_set_rate 19:144000
[ 2.215761] clk_get_rate 19:144000
[ 2.218910] set sdcc vdd to 0
[ 2.220340] mmc0: Qualcomm MSM SDCC at 0x00000000e1000000 irq 24,0 dma 8
[ 2.225293] mmc0: 4 bit data mode enabled
[ 2.230051] mmc0: MMC clock 144000 -> 32000000 Hz, PCLK 66000000 Hz
[ 2.235446] mmc0: Slot eject status = 0
[ 2.240040] mmc0: Power save feature enable = 1
[ 2.245461] mmc0: DM non-cached buffer at ffc7e000, dma_addr 0x164eb000
[ 2.250096] mmc0: DM cmd busaddr 0x164eb000, cmdptr busaddr 0x164eb300
[ 2.255720] mmc0: Polling status mode enabled
[ 2.260836] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 2.276655] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.280505] ClusterIP Version 0.8 loaded successfully
[ 2.290278] arp_tables: (C) 2002 David S. Miller
[ 2.296755] TCP cubic registered
[ 2.300388] NET: Registered protocol family 1
[ 2.306961] NET: Registered protocol family 17
[ 2.310238] Bluetooth: L2CAP ver 2.9
[ 2.313503] Bluetooth: L2CAP socket layer initialized
[ 2.320100] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.330141] Bluetooth: SCO socket layer initialized
[ 2.336563] Bluetooth: RFCOMM socket layer initialized
[ 2.340230] Bluetooth: RFCOMM TTY layer initialized
[ 2.346216] Bluetooth: RFCOMM ver 1.9
[ 2.350261] Bluetooth: BNEP (Ethernet Emulation) ver 1.2
[ 2.356218] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.361336] msm_rtc msm_rtc.0: setting system clock to 2010-09-19 02:18:47 UTC (1284862727)
[ 2.370293] Freeing init memory: 124K
[ 2.720098] set sdcc vdd to 17
[ 2.733608] Setting SD VREG to 2950
[ 2.746028] mmc0: Command timeout
[ 2.750000] mmc0: Command timeout
[ 2.750000] mmc0: Command timeout
[ 2.750000] mmc0: Command timeout
[ 2.750000] SD Init
[ 2.754013] set sdcc vdd to 15
[ 2.756556] Setting SD VREG to 2750
[ 2.798453] mmc_sd_init_card: Delay 250 ms
[ 3.060000] clk_set_rate 19:25000000
[ 3.156216] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 3.160113] SD Init Retry
[ 3.162605] mmc0: new SDHC card at address d555
[ 3.171025] mmcblk0: mmc0:d555 SU04G 3979776KiB
[ 3.176448] mmcblk0: p1
i dont see anything that sticks out though...
bump.
i've tried several different android packs and still the same issue. im really stuck. hell if someone would be willing to skype and help me figure it out i'd be willing. im just tired of being frustrated and such. i've literally ben googling for about 5 hours today trying different things.
bump again. i can provide any information needed, i'd really like to get this working. anyone? ive repeated the steps at least 7 times now and no love. any help is appreciated, even armature speculations.
[mutex] said:
I've read a considerable number of threads both here and elsewhere, i'm having a ton of trouble getting HeRET.exe to work. i've formatted my sdcard with fat32, and my directory layout looks like this
Code:
[[email protected] 1BCE-6D05]$ ls * -R
VOGUIMG.nbh
andboot:
androidinstall.tgz default.txt initrd.gz
default-kaiser.txt dmesg README-BASEFILES.txt
default-polaris.txt haret.exe zImage
upon running HeRET.exe, i hold the center button on the dpad down. **** scrolls by and stops with these last few lines:
Code:
sh: 2: unkonwn operand
losetup: /dev/block/loop1: no such file or directory
failed
failed to reach system.img on SD Card
i've googled a ton for those error strings and i cant find a solution anywhere.
what am i doing wrong?
Click to expand...
Click to collapse
Lets back up a step... which ROM are you trying to use? From SD or NAND? The message says that it cannot find the system.img, and if it is the first boot, it obviously will not find it as the system.img has not been created at this point. From what I understand, it may be something on your default.txt.
I would just download a fresh rom, (get myn's latest for now and see if the device reacts). Delete the Android folder in your SD card and replace it by myn's
Followed the instructions for myn's to a T. I'm using the NoMoRootFS method, not NAND (yet).
I checked the init code - basically, you're seeing the failure messages because
1) you aren't installed to nand
2) your sdcard doesn't have a 2nd/3rd partition
3) you don't have a system.img on your sdcard
all that basically means is, it's becuase you haven't made it into the installer - so there's not a lot to be gleaned from the failure messages and, unfortunately, there's not a lot of logging... ok, so you've tried volup, dpad center, how about touchscreen center? It should work also.
I mean, I could generate a custom init that ALWAYS enters the installer to get you through this part, or you could try generating a boot script with the bootscriptgenerator you can find in the vogue android subforum...
does the console print anything when you press buttons? what's the date on your zImage? and did you download the 2.6.25 or 2.6.32 version?
I used the SQSH method here http://download640.mediafire.com/5mvxwozyuQjg/oitjoljxquj/myn-WarmDonut-04-24-2010-SQSH.zip
works fine. not sure what i was doing wrong but oh well. well, works fine with the exception of the camera button doing back/home(hold). thats kinda iffy. seems to only work in specific contexts. i.e. inside the 'browser' or email app i cant leave to the main screen. better than no android though.
thanks for your help guys. i wonder why the NoMoRootFS method didnt work though ;/
[mutex] said:
I used the SQSH method here http://download640.mediafire.com/5mvxwozyuQjg/oitjoljxquj/myn-WarmDonut-04-24-2010-SQSH.zip
works fine. not sure what i was doing wrong but oh well. well, works fine with the exception of the camera button doing back/home(hold). thats kinda iffy. seems to only work in specific contexts. i.e. inside the 'browser' or email app i cant leave to the main screen. better than no android though.
thanks for your help guys. i wonder why the NoMoRootFS method didnt work though ;/
Click to expand...
Click to collapse
quick press = back
med press = home
long press = recent programs
if that helps...
yeah i know those, its just that sometimes the camera button doesnt do anything, quick press hold or long hold.
Hmm... well, the old sqsh method can be pretty sluggish, too, I wonder if your presses just aren't registering properly... anyway, you sound like the sort who will got to nand after some initial testing. everything is much, much better on nand.
yeah thats what im doing now. everything works fine with the exception of the camera button and like you said stuff works better. anyways, thanks for your help again.
Greetings!
Have had these problems before, and it went away before I upgraded to EB13. I have noticed this mentioned in other threads, but not sure if the root cause is the same as the symptoms vary, and I haven't seen any logs posted to compare. Also, my issue now is that it is happening about every 5 to 10 minutes of actively using Wifi; if I turn it on and then just let it sit without any data use, it will stay on all night!
The issue, which is similar to what others have reported, is that the device will connect to Wifi and then after some time will disconnect. Once this happens you cannot tap the icon in the notification area, but must goto wireless->settings and tap the box there (even though it says error, it will turn back on). I checked the logs and here is what I found:
Code:
=======>>>Sensor Thread RUNNING <<<========
[ 03-05 23:20:23.407 5954:0x1742 E/SensorManager ]
registerListener 1:MS-3C Magnetic Sensor delay:60
[ 03-05 23:20:23.411 5954:0x1742 E/SensorManager ]
registerListener 0:SMB380 delay:60
[ 03-05 23:20:35.118 2669:0xae5 E/WifiStateTracker ]
Wifi Driver reports HUNG - reloading.
[ 03-05 23:20:36.477 2669:0xae9 E/HierarchicalStateMachine ]
TetherMaster - unhandledMessage: msg.what=3
[ 03-05 23:20:37.266 2669:0xae8 E/WifiHW ]
[WIFI] Unload Driver
[ 03-05 23:20:41.044 4049:0xfda E/pppd ]
Start PPPD Now
[ 03-05 23:20:42.126 2669:0xae5 E/NetworkStateTracker ]
net.tcp.buffersize.evdo not found in system properties. Using defaults
[ 03-05 23:20:42.184 2669:0xae9 E/HierarchicalStateMachine ]
TetherMaster - unhandledMessage: msg.what=3
[ 03-05 23:20:49.462 2669:0xae8 E/WifiHW ]
return of insmod (args:firmware_path=/system/etc/wifi/bcm4329_sta.bin nvram_path=/system/etc/wifi/nvram_net.txt dhd_watchdog_ms=10 dhd_poll=1) : ret = -1, Invalid argument
[ 03-05 23:20:59.005 6186:0x1833 E/CM_HttpAccess.java ]
Mod:HttpAccess Line# 545 CM+HT200 bad db-item, db-id 33
[ 03-05 23:21:00.477 6186:0x182a E/CM_UpgradeManager.java ]
Mod:Integration Line# 979 versionNumber is null
[ 03-05 23:21:14.747 2669:0xae0 E/imdg81 ]
IsShutDownStarted()
[ 03-05 23:21:16.032 2669:0xae0 E/imdg81 ]
IsShutDownStarted()
[ 03-05 23:21:16.766 2669:0xa
I see it says Wifi driver is hung, and I keep noticing the "tethermaster" error. Can anyone explain what may be happening, and if this is something that can be fixed or is indicative of a hardware issue? Thanks!
I've done some searching and found some workarounds, but I too wonder if any progress has been made on this issue? I'd be happy to contribute some log files myself it it would help.
Thanks.
If you upgraded to EB13 via OTA, use Odin to flash back to a clean-slate EB13. The OTA was a piece of crap thanks to non-wiped data.
Nope, I'm using Bonsai 3.0.1 - fresh install.
This has been an ongoing issue since DK28 for me - although apparently doesn't seem to affect everyone. I happen to use WiFi a lot, so I see it daily.
ROM available here: http://forum.xda-developers.com/showthread.php?t=2943934
Hello, I built AOSP 5 and CM12 (even if it's still more AOSP-like atm) for i9505 but don't boot.
This is the last_kmsg:
Code:
[ 0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
[ 0.000000] sec_tsp_mode: LCD_ID = 0x408047, val: 0X408047, ret1: 0x8
[ 0.030853] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[ 0.052886] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.052917] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.052947] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.052947] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.052978] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.053009] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.053009] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.053039] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.124511] sensor_power_on_vdd: done
[ 0.177917] i2c i2c-4: Failed to register i2c client imx135 at 0x10 (-16)
[ 0.178100] i2c i2c-4: Can't create device at 0x10
[ 0.178497] i2c i2c-4: Failed to register i2c client s5k3l1yx at 0x34 (-16)
[ 0.178710] i2c i2c-4: Can't create device at 0x34
[ 0.210174] ion_heap_create: Invalid heap type 3
[ 0.214752] msm_slim_ctrl msm_slim_ctrl.1: Slim-dev:3 report inf element:0x0
[ 0.214904] msm_slim_ctrl msm_slim_ctrl.1: offset:0x0:bit mask:8
[ 0.215484] msm_slim_ctrl msm_slim_ctrl.1: Slim-dev:4 report inf element:0x400
[ 0.215759] msm_slim_ctrl msm_slim_ctrl.1: offset:0x0:bit mask:8
[ 0.291564] Error-Bad Function Input
[ 0.292449] Error-Bad Function Input
[ 0.399383] smd_channel_probe_worker: allocation table not initialized
[ 0.408843] dma_test_init, minor number 37
[ 0.416992] mdm_modem_probe: registered mdm id 0
[ 0.417114] mdm_do_first_power_on:id 0: Powering on modem for the first time
[ 0.672729] cont_splash_clk_ctrl: dsi_esc_clk - clk_set_rate failed
[ 0.681335] [mdnie lite] start!
[ 0.681518] [mdnie lite] end!
[ 0.682952] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group df046e08
[ 0.683319] Inside writeback_driver_init
[ 0.683563] Inside writeback_probe
[ 0.876434] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6
[ 0.944671] msm_otg msm_otg: failed to get phy_clk
[ 1.115600] couldn't get usb power supply
[ 1.135345] [jc_spi_init:336] Entered
[ 1.135437] [jc_spi_probe:301] Entered
[ 1.135528] [jc_spi_probe:311] jc_spi successfully probed
[ 1.135681] jc_config_isp_irq~~~~~~~~~~
[ 1.135833] msm_eeprom_probe probe_fail
[ 1.139526] msm_sensor_i2c_probe s5k6b2yx probe succeeded
[ 1.139648] msm_eeprom_probe probe_fail
[ 1.173065] mmc0: No card detect facilities available
[ 1.297515] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
[ 1.297637] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
[ 1.314422] max77693_get_health_state: Fail to get psy (battery)
[ 1.317077] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
[ 1.318664] max77693_get_health_state: Fail to get psy (battery)
[ 1.321289] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
[ 1.358367] mmc0: msmsdcc_execute_tuning: found good phase = 0
[ 1.358489] mmc0: msmsdcc_execute_tuning: found good phase = 1
[ 1.358703] mmc0: msmsdcc_execute_tuning: found good phase = 2
[ 1.358825] mmc0: msmsdcc_execute_tuning: found good phase = 3
[ 1.359008] mmc0: msmsdcc_execute_tuning: found good phase = 4
[ 1.359130] mmc0: msmsdcc_execute_tuning: found good phase = 5
[ 1.359313] mmc0: msmsdcc_execute_tuning: found good phase = 6
[ 1.359466] mmc0: msmsdcc_execute_tuning: found good phase = 7
[ 1.359649] mmc0: msmsdcc_execute_tuning: found good phase = 8
[ 1.359771] mmc0: msmsdcc_execute_tuning: found good phase = 9
[ 1.359954] mmc0: msmsdcc_execute_tuning: found good phase = 10
[ 1.360107] mmc0: msmsdcc_execute_tuning: found good phase = 11
[ 1.360290] mmc0: msmsdcc_execute_tuning: found good phase = 12
[ 1.360412] mmc0: msmsdcc_execute_tuning: found good phase = 13
[ 1.360595] mmc0: msmsdcc_execute_tuning: found good phase = 14
[ 1.360717] mmc0: msmsdcc_execute_tuning: found good phase = 15
[ 1.360839] mmc0: msmsdcc_execute_tuning: finally setting the tuning phase to 11
[ 1.540985] qup_i2c qup_i2c.2: QUP: I2C status flags :0x11143c8, irq:228
[ 1.541076] qup_i2c qup_i2c.2: I2C slave addr:0x26 not connected
[ 1.618560] msm_audio_init: Not the right machine type
[ 1.903472] sec-battery sec-battery: sec_battery_probe: Failed to Enable Wakeup Source(-6)
[ 1.908355] irda_device_init called!
[ 1.908782] barcode_emul_ice4: probe complete barcode_emul_probe
[ 1.909179] brcm_wlan_power: WL_REG_ON failed to pull up
[ 1.909271] brcm_wlan_power: WL_REG_ON failed to pull down
[ 3.720855] synaptics_rmi4_i2c 3-0020: synaptics_ta_cb: device is in suspend state or reflash.
[ 3.922607] brcm_wlan_power: WL_REG_ON failed to pull up
[ 3.922698] brcm_wlan_power: WL_REG_ON failed to pull down
[ 5.932617] brcm_wlan_power: WL_REG_ON failed to pull up
[ 5.932708] brcm_wlan_power: WL_REG_ON failed to pull down
[ 8.317565] mmc1: msmsdcc_execute_tuning: found good phase = 0
[ 8.317687] mmc1: msmsdcc_execute_tuning: found good phase = 1
[ 8.317871] mmc1: msmsdcc_execute_tuning: found good phase = 2
[ 8.318023] mmc1: msmsdcc_execute_tuning: found good phase = 3
[ 8.318206] mmc1: msmsdcc_execute_tuning: found good phase = 4
[ 8.318328] mmc1: msmsdcc_execute_tuning: found good phase = 5
[ 8.319091] mmc1: msmsdcc_execute_tuning: found good phase = 8
[ 8.319213] mmc1: msmsdcc_execute_tuning: found good phase = 9
[ 8.319396] mmc1: msmsdcc_execute_tuning: found good phase = 10
[ 8.319549] mmc1: msmsdcc_execute_tuning: found good phase = 11
[ 8.319702] mmc1: msmsdcc_execute_tuning: found good phase = 12
[ 8.319854] mmc1: msmsdcc_execute_tuning: found good phase = 13
[ 8.320037] mmc1: msmsdcc_execute_tuning: found good phase = 14
[ 8.320159] mmc1: msmsdcc_execute_tuning: found good phase = 15
[ 8.320281] mmc1: msmsdcc_execute_tuning: finally setting the tuning phase to 1
[ 9.098876] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
[ 9.104797] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
[B][ 9.240478] init: cannot find '/system/bin/sysinit', disabling 'sysinit'
[ 9.240692] init: Unable to open persistent property directory /data/property errno: 2
[ 9.245391] init: cannot find '/system/bin/logd', disabling 'logd'
[ 9.245880] init: cannot find '/system/bin/lmkd', disabling 'lmkd'
[ 9.246002] init: cannot find '/system/bin/servicemanager', disabling 'servicemanager'
[ 9.246124] init: cannot find '/system/bin/vold', disabling 'vold'
[ 9.246276] init: cannot find '/system/bin/surfaceflinger', disabling 'surfaceflinger'
[ 9.246398] init: cannot find '/system/bin/sh', disabling 'config_bluetooth'
[ 9.256835] init: cannot find '/system/bin/sh', disabling 'console'
[ 9.256958] init: cannot find '/system/bin/rmt_storage', disabling 'rmt_storage'[/B]
[ 10.383392] synaptics_rmi4_i2c 3-0020: synaptics_ta_cb: device is in suspend state or reflash.
[ 38.952606] [TouchKey]press=1, code=0
[ 39.171752] [TouchKey]press=0, code=0
[ 45.726440] PMIC Initiated shutdown cpu_power_off cpu=0
[ 45.726440] PMIC Initiated shutdown cpu_power_off cpu=3
[ 45.726470] PMIC Initiated shutdown cpu_power_off cpu=1
[ 45.726470] PMIC Initiated shutdown cpu_power_off cpu=2
[ 45.726745] Powering off the SoC
[ 45.726867] Calling scm to disable arbiter
[ 45.726959] SCM returned even when asked to busy loop rc=-4
[ 45.727020] waiting on pmic to shut msm down
1 Corrected bytes, 0 unrecoverable blocks
First critical error is: [ 9.240478] init: cannot find '/system/bin/sysinit', disabling 'sysinit'
Seems like if /system partition isn't mounted, but fstab is okay. After flashing ZIP, those binaries are present in /system/bin. Device stays on Samsung bootsplash and ADB is working since I built with eng so ro.adb.secure is 0, but if I try to open shell I get /system/bin/sh: not found. Kernel source is CM11 one.
If anyone has an idea, any help would be appreciated.
EDIT: I modified init.rc and now last_kmsg:
Code:
[ 0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
[ 0.000000] sec_tsp_mode: LCD_ID = 0x408047, val: 0X408047, ret1: 0x8
[ 0.031494] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[ 0.053710] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.053741] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.053741] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.053771] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.053802] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.053802] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.053833] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.053863] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.122497] sensor_power_on_vdd: done
[ 0.175933] i2c i2c-4: Failed to register i2c client imx135 at 0x10 (-16)
[ 0.176116] i2c i2c-4: Can't create device at 0x10
[ 0.176513] i2c i2c-4: Failed to register i2c client s5k3l1yx at 0x34 (-16)
[ 0.176696] i2c i2c-4: Can't create device at 0x34
[ 0.209106] ion_heap_create: Invalid heap type 3
[ 0.213653] msm_slim_ctrl msm_slim_ctrl.1: Slim-dev:3 report inf element:0x0
[ 0.213806] msm_slim_ctrl msm_slim_ctrl.1: offset:0x0:bit mask:8
[ 0.214172] msm_slim_ctrl msm_slim_ctrl.1: Slim-dev:4 report inf element:0x400
[ 0.214660] msm_slim_ctrl msm_slim_ctrl.1: offset:0x0:bit mask:8
[ 0.289825] Error-Bad Function Input
[ 0.290771] Error-Bad Function Input
[ 0.526214] smd_channel_probe_worker: allocation table not initialized
[ 0.535797] dma_test_init, minor number 37
[ 0.543884] mdm_modem_probe: registered mdm id 0
[ 0.544128] mdm_do_first_power_on:id 0: Powering on modem for the first time
[ 0.851287] cont_splash_clk_ctrl: dsi_esc_clk - clk_set_rate failed
[ 0.859802] [mdnie lite] start!
[ 0.859954] [mdnie lite] end!
[ 0.861450] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group df04cc08
[ 0.861816] Inside writeback_driver_init
[ 0.862030] Inside writeback_probe
[ 1.055023] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6
[ 1.123413] msm_otg msm_otg: failed to get phy_clk
[ 1.294342] couldn't get usb power supply
[ 1.314239] [jc_spi_init:336] Entered
[ 1.314331] [jc_spi_probe:301] Entered
[ 1.314422] [jc_spi_probe:311] jc_spi successfully probed
[ 1.314544] jc_config_isp_irq~~~~~~~~~~
[ 1.314666] msm_eeprom_probe probe_fail
[ 1.318389] msm_sensor_i2c_probe s5k6b2yx probe succeeded
[ 1.318481] msm_eeprom_probe probe_fail
[ 1.352172] mmc0: No card detect facilities available
[ 1.475433] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
[ 1.475555] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
[ 1.492126] max77693_get_health_state: Fail to get psy (battery)
[ 1.494750] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
[ 1.496337] max77693_get_health_state: Fail to get psy (battery)
[ 1.498901] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
[ 1.537536] mmc0: msmsdcc_execute_tuning: found good phase = 0
[ 1.537689] mmc0: msmsdcc_execute_tuning: found good phase = 1
[ 1.537841] mmc0: msmsdcc_execute_tuning: found good phase = 2
[ 1.537994] mmc0: msmsdcc_execute_tuning: found good phase = 3
[ 1.538146] mmc0: msmsdcc_execute_tuning: found good phase = 4
[ 1.538269] mmc0: msmsdcc_execute_tuning: found good phase = 5
[ 1.538452] mmc0: msmsdcc_execute_tuning: found good phase = 6
[ 1.538574] mmc0: msmsdcc_execute_tuning: found good phase = 7
[ 1.538757] mmc0: msmsdcc_execute_tuning: found good phase = 8
[ 1.538879] mmc0: msmsdcc_execute_tuning: found good phase = 9
[ 1.539062] mmc0: msmsdcc_execute_tuning: found good phase = 10
[ 1.539184] mmc0: msmsdcc_execute_tuning: found good phase = 11
[ 1.539642] mmc0: msmsdcc_execute_tuning: found good phase = 13
[ 1.539794] mmc0: msmsdcc_execute_tuning: found good phase = 14
[ 1.539947] mmc0: msmsdcc_execute_tuning: found good phase = 15
[ 1.540039] mmc0: msmsdcc_execute_tuning: finally setting the tuning phase to 7
[ 1.540802] qup_i2c qup_i2c.2: QUP: I2C status flags :0x11143c8, irq:228
[ 1.540924] qup_i2c qup_i2c.2: I2C slave addr:0x26 not connected
[ 1.617065] msm_audio_init: Not the right machine type
[ 1.922241] sec-battery sec-battery: sec_battery_probe: Failed to Enable Wakeup Source(-6)
[ 1.936584] irda_device_init called!
[ 1.937042] barcode_emul_ice4: probe complete barcode_emul_probe
[ 1.937377] brcm_wlan_power: WL_REG_ON failed to pull up
[ 1.937530] brcm_wlan_power: WL_REG_ON failed to pull down
[ 3.896179] synaptics_rmi4_i2c 3-0020: synaptics_ta_cb: device is in suspend state or reflash.
[ 3.951263] brcm_wlan_power: WL_REG_ON failed to pull up
[ 3.951416] brcm_wlan_power: WL_REG_ON failed to pull down
[ 5.961273] brcm_wlan_power: WL_REG_ON failed to pull up
[ 5.961364] brcm_wlan_power: WL_REG_ON failed to pull down
[ 8.018737] hostwake line change [BT]
[ 8.586364] mmc1: msmsdcc_execute_tuning: found good phase = 0
[ 8.586547] mmc1: msmsdcc_execute_tuning: found good phase = 1
[ 8.586669] mmc1: msmsdcc_execute_tuning: found good phase = 2
[ 8.586853] mmc1: msmsdcc_execute_tuning: found good phase = 3
[ 8.586975] mmc1: msmsdcc_execute_tuning: found good phase = 4
[ 8.587158] mmc1: msmsdcc_execute_tuning: found good phase = 5
[ 8.587860] mmc1: msmsdcc_execute_tuning: found good phase = 8
[ 8.588043] mmc1: msmsdcc_execute_tuning: found good phase = 9
[ 8.588165] mmc1: msmsdcc_execute_tuning: found good phase = 10
[ 8.588348] mmc1: msmsdcc_execute_tuning: found good phase = 11
[ 8.588470] mmc1: msmsdcc_execute_tuning: found good phase = 12
[ 8.588653] mmc1: msmsdcc_execute_tuning: found good phase = 13
[ 8.588836] mmc1: msmsdcc_execute_tuning: found good phase = 14
[ 8.588958] mmc1: msmsdcc_execute_tuning: found good phase = 15
[ 8.589080] mmc1: msmsdcc_execute_tuning: finally setting the tuning phase to 1
[ 10.129394] healthd: wakealarm_init: timerfd_create failed
[ 10.365814] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
[ 10.370635] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
[ 10.478942] init: property 'ro.product.model' doesn't exist while expanding '${ro.product.model}'
[ 10.479064] init: cannot expand '${ro.product.model}' while writing to '/sys/class/android_usb/android0/iProduct'
[ 10.479766] init: Unable to open persistent property directory /data/property errno: 2
[ 10.480194] init: Found bootloader id I9505XXUGNG8 setting build properties for jfltexx device
[ 10.482574] healthd: wakealarm_init: timerfd_create failed
[ 12.240692] [mdnie lite] is negative Mode On = 0
[ 12.240692] [mdnie lite] negative off when resume, tuning again!
[ 12.240722] [mdnie lite] mDNIe_Set_Mode start , mode(0), background(1)
[ 12.240722] [mdnie lite] = UI MODE =
[ 12.240753] [mdnie lite] = STANDARD MODE =
[ 12.240753] [mdnie lite] send tuning cmd!!
[ 12.290435] [mdnie lite] mDNIe_Set_Mode end , mode(0), background(1)
[ 12.962921] [mdnie lite] is negative Mode On = 0
[ 12.962921] [mdnie lite] negative off when resume, tuning again!
[ 12.962951] [mdnie lite] mDNIe_Set_Mode start , mode(0), background(1)
[ 12.962951] [mdnie lite] = UI MODE =
[ 12.962982] [mdnie lite] = STANDARD MODE =
[ 12.962982] [mdnie lite] send tuning cmd!!
[ 13.012664] [mdnie lite] mDNIe_Set_Mode end , mode(0), background(1)
[ 408.649932] [mdnie lite] is negative Mode On = 0
[ 408.649932] [mdnie lite] negative off when resume, tuning again!
[ 408.649963] [mdnie lite] mDNIe_Set_Mode start , mode(0), background(1)
[ 408.649963] [mdnie lite] = UI MODE =
[ 408.649963] [mdnie lite] = STANDARD MODE =
[ 408.649993] [mdnie lite] send tuning cmd!!
[ 408.699676] [mdnie lite] mDNIe_Set_Mode end , mode(0), background(1)
[ 1123.502899] [mdnie lite] is negative Mode On = 0
[ 1123.502929] [mdnie lite] negative off when resume, tuning again!
[ 1123.502929] [mdnie lite] mDNIe_Set_Mode start , mode(0), background(1)
[ 1123.502960] [mdnie lite] = UI MODE =
[ 1123.502960] [mdnie lite] = STANDARD MODE =
[ 1123.502960] [mdnie lite] send tuning cmd!!
[ 1123.552642] [mdnie lite] mDNIe_Set_Mode end , mode(0), background(1)
[ 1125.997711] SysRq : Emergency Remount R/O
[ 1126.825103] qup_i2c qup_i2c.2: QUP: I2C status flags :0x1343c8, irq:228
[ 1126.825164] qup_i2c qup_i2c.2: I2C slave addr:0x26 not connected
[ 1126.825317] MFD is Null
[ 1126.857635] Restarting system with command ''.
No errors detected
AntaresOne said:
Hello, I built AOSP 5 and CM12 (even if it's still more AOSP-like atm) for i9505 but don't boot.
This is the last_kmsg:
Code:
[ 0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
[ 0.000000] sec_tsp_mode: LCD_ID = 0x408047, val: 0X408047, ret1: 0x8
[ 0.030853] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[ 0.052886] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.052917] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.052947] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.052947] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.052978] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.053009] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.053009] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.053039] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.124511] sensor_power_on_vdd: done
[ 0.177917] i2c i2c-4: Failed to register i2c client imx135 at 0x10 (-16)
[ 0.178100] i2c i2c-4: Can't create device at 0x10
[ 0.178497] i2c i2c-4: Failed to register i2c client s5k3l1yx at 0x34 (-16)
[ 0.178710] i2c i2c-4: Can't create device at 0x34
[ 0.210174] ion_heap_create: Invalid heap type 3
[ 0.214752] msm_slim_ctrl msm_slim_ctrl.1: Slim-dev:3 report inf element:0x0
[ 0.214904] msm_slim_ctrl msm_slim_ctrl.1: offset:0x0:bit mask:8
[ 0.215484] msm_slim_ctrl msm_slim_ctrl.1: Slim-dev:4 report inf element:0x400
[ 0.215759] msm_slim_ctrl msm_slim_ctrl.1: offset:0x0:bit mask:8
[ 0.291564] Error-Bad Function Input
[ 0.292449] Error-Bad Function Input
[ 0.399383] smd_channel_probe_worker: allocation table not initialized
[ 0.408843] dma_test_init, minor number 37
[ 0.416992] mdm_modem_probe: registered mdm id 0
[ 0.417114] mdm_do_first_power_on:id 0: Powering on modem for the first time
[ 0.672729] cont_splash_clk_ctrl: dsi_esc_clk - clk_set_rate failed
[ 0.681335] [mdnie lite] start!
[ 0.681518] [mdnie lite] end!
[ 0.682952] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group df046e08
[ 0.683319] Inside writeback_driver_init
[ 0.683563] Inside writeback_probe
[ 0.876434] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6
[ 0.944671] msm_otg msm_otg: failed to get phy_clk
[ 1.115600] couldn't get usb power supply
[ 1.135345] [jc_spi_init:336] Entered
[ 1.135437] [jc_spi_probe:301] Entered
[ 1.135528] [jc_spi_probe:311] jc_spi successfully probed
[ 1.135681] jc_config_isp_irq~~~~~~~~~~
[ 1.135833] msm_eeprom_probe probe_fail
[ 1.139526] msm_sensor_i2c_probe s5k6b2yx probe succeeded
[ 1.139648] msm_eeprom_probe probe_fail
[ 1.173065] mmc0: No card detect facilities available
[ 1.297515] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
[ 1.297637] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
[ 1.314422] max77693_get_health_state: Fail to get psy (battery)
[ 1.317077] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
[ 1.318664] max77693_get_health_state: Fail to get psy (battery)
[ 1.321289] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
[ 1.358367] mmc0: msmsdcc_execute_tuning: found good phase = 0
[ 1.358489] mmc0: msmsdcc_execute_tuning: found good phase = 1
[ 1.358703] mmc0: msmsdcc_execute_tuning: found good phase = 2
[ 1.358825] mmc0: msmsdcc_execute_tuning: found good phase = 3
[ 1.359008] mmc0: msmsdcc_execute_tuning: found good phase = 4
[ 1.359130] mmc0: msmsdcc_execute_tuning: found good phase = 5
[ 1.359313] mmc0: msmsdcc_execute_tuning: found good phase = 6
[ 1.359466] mmc0: msmsdcc_execute_tuning: found good phase = 7
[ 1.359649] mmc0: msmsdcc_execute_tuning: found good phase = 8
[ 1.359771] mmc0: msmsdcc_execute_tuning: found good phase = 9
[ 1.359954] mmc0: msmsdcc_execute_tuning: found good phase = 10
[ 1.360107] mmc0: msmsdcc_execute_tuning: found good phase = 11
[ 1.360290] mmc0: msmsdcc_execute_tuning: found good phase = 12
[ 1.360412] mmc0: msmsdcc_execute_tuning: found good phase = 13
[ 1.360595] mmc0: msmsdcc_execute_tuning: found good phase = 14
[ 1.360717] mmc0: msmsdcc_execute_tuning: found good phase = 15
[ 1.360839] mmc0: msmsdcc_execute_tuning: finally setting the tuning phase to 11
[ 1.540985] qup_i2c qup_i2c.2: QUP: I2C status flags :0x11143c8, irq:228
[ 1.541076] qup_i2c qup_i2c.2: I2C slave addr:0x26 not connected
[ 1.618560] msm_audio_init: Not the right machine type
[ 1.903472] sec-battery sec-battery: sec_battery_probe: Failed to Enable Wakeup Source(-6)
[ 1.908355] irda_device_init called!
[ 1.908782] barcode_emul_ice4: probe complete barcode_emul_probe
[ 1.909179] brcm_wlan_power: WL_REG_ON failed to pull up
[ 1.909271] brcm_wlan_power: WL_REG_ON failed to pull down
[ 3.720855] synaptics_rmi4_i2c 3-0020: synaptics_ta_cb: device is in suspend state or reflash.
[ 3.922607] brcm_wlan_power: WL_REG_ON failed to pull up
[ 3.922698] brcm_wlan_power: WL_REG_ON failed to pull down
[ 5.932617] brcm_wlan_power: WL_REG_ON failed to pull up
[ 5.932708] brcm_wlan_power: WL_REG_ON failed to pull down
[ 8.317565] mmc1: msmsdcc_execute_tuning: found good phase = 0
[ 8.317687] mmc1: msmsdcc_execute_tuning: found good phase = 1
[ 8.317871] mmc1: msmsdcc_execute_tuning: found good phase = 2
[ 8.318023] mmc1: msmsdcc_execute_tuning: found good phase = 3
[ 8.318206] mmc1: msmsdcc_execute_tuning: found good phase = 4
[ 8.318328] mmc1: msmsdcc_execute_tuning: found good phase = 5
[ 8.319091] mmc1: msmsdcc_execute_tuning: found good phase = 8
[ 8.319213] mmc1: msmsdcc_execute_tuning: found good phase = 9
[ 8.319396] mmc1: msmsdcc_execute_tuning: found good phase = 10
[ 8.319549] mmc1: msmsdcc_execute_tuning: found good phase = 11
[ 8.319702] mmc1: msmsdcc_execute_tuning: found good phase = 12
[ 8.319854] mmc1: msmsdcc_execute_tuning: found good phase = 13
[ 8.320037] mmc1: msmsdcc_execute_tuning: found good phase = 14
[ 8.320159] mmc1: msmsdcc_execute_tuning: found good phase = 15
[ 8.320281] mmc1: msmsdcc_execute_tuning: finally setting the tuning phase to 1
[ 9.098876] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
[ 9.104797] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
[B][ 9.240478] init: cannot find '/system/bin/sysinit', disabling 'sysinit'
[ 9.240692] init: Unable to open persistent property directory /data/property errno: 2
[ 9.245391] init: cannot find '/system/bin/logd', disabling 'logd'
[ 9.245880] init: cannot find '/system/bin/lmkd', disabling 'lmkd'
[ 9.246002] init: cannot find '/system/bin/servicemanager', disabling 'servicemanager'
[ 9.246124] init: cannot find '/system/bin/vold', disabling 'vold'
[ 9.246276] init: cannot find '/system/bin/surfaceflinger', disabling 'surfaceflinger'
[ 9.246398] init: cannot find '/system/bin/sh', disabling 'config_bluetooth'
[ 9.256835] init: cannot find '/system/bin/sh', disabling 'console'
[ 9.256958] init: cannot find '/system/bin/rmt_storage', disabling 'rmt_storage'[/B]
[ 10.383392] synaptics_rmi4_i2c 3-0020: synaptics_ta_cb: device is in suspend state or reflash.
[ 38.952606] [TouchKey]press=1, code=0
[ 39.171752] [TouchKey]press=0, code=0
[ 45.726440] PMIC Initiated shutdown cpu_power_off cpu=0
[ 45.726440] PMIC Initiated shutdown cpu_power_off cpu=3
[ 45.726470] PMIC Initiated shutdown cpu_power_off cpu=1
[ 45.726470] PMIC Initiated shutdown cpu_power_off cpu=2
[ 45.726745] Powering off the SoC
[ 45.726867] Calling scm to disable arbiter
[ 45.726959] SCM returned even when asked to busy loop rc=-4
[ 45.727020] waiting on pmic to shut msm down
1 Corrected bytes, 0 unrecoverable blocks
First critical error is: [ 9.240478] init: cannot find '/system/bin/sysinit', disabling 'sysinit'
Seems like if /system partition isn't mounted, but fstab is okay. After flashing ZIP, those binaries are present in /system/bin. Device stays on Samsung bootsplash and ADB is working since I built with eng so ro.adb.secure is 0, but if I try to open shell I get /system/bin/sh: not found. Kernel source is CM11 one.
If anyone has an idea, any help would be appreciated.
EDIT: I modified init.rc and now last_kmsg:
Code:
[ 0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
[ 0.000000] sec_tsp_mode: LCD_ID = 0x408047, val: 0X408047, ret1: 0x8
[ 0.031494] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[ 0.053710] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.053741] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.053741] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.053771] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.053802] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.053802] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.053833] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.053863] msm_rpm_get_status(): Status id 433 not defined for target
[ 0.122497] sensor_power_on_vdd: done
[ 0.175933] i2c i2c-4: Failed to register i2c client imx135 at 0x10 (-16)
[ 0.176116] i2c i2c-4: Can't create device at 0x10
[ 0.176513] i2c i2c-4: Failed to register i2c client s5k3l1yx at 0x34 (-16)
[ 0.176696] i2c i2c-4: Can't create device at 0x34
[ 0.209106] ion_heap_create: Invalid heap type 3
[ 0.213653] msm_slim_ctrl msm_slim_ctrl.1: Slim-dev:3 report inf element:0x0
[ 0.213806] msm_slim_ctrl msm_slim_ctrl.1: offset:0x0:bit mask:8
[ 0.214172] msm_slim_ctrl msm_slim_ctrl.1: Slim-dev:4 report inf element:0x400
[ 0.214660] msm_slim_ctrl msm_slim_ctrl.1: offset:0x0:bit mask:8
[ 0.289825] Error-Bad Function Input
[ 0.290771] Error-Bad Function Input
[ 0.526214] smd_channel_probe_worker: allocation table not initialized
[ 0.535797] dma_test_init, minor number 37
[ 0.543884] mdm_modem_probe: registered mdm id 0
[ 0.544128] mdm_do_first_power_on:id 0: Powering on modem for the first time
[ 0.851287] cont_splash_clk_ctrl: dsi_esc_clk - clk_set_rate failed
[ 0.859802] [mdnie lite] start!
[ 0.859954] [mdnie lite] end!
[ 0.861450] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group df04cc08
[ 0.861816] Inside writeback_driver_init
[ 0.862030] Inside writeback_probe
[ 1.055023] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6
[ 1.123413] msm_otg msm_otg: failed to get phy_clk
[ 1.294342] couldn't get usb power supply
[ 1.314239] [jc_spi_init:336] Entered
[ 1.314331] [jc_spi_probe:301] Entered
[ 1.314422] [jc_spi_probe:311] jc_spi successfully probed
[ 1.314544] jc_config_isp_irq~~~~~~~~~~
[ 1.314666] msm_eeprom_probe probe_fail
[ 1.318389] msm_sensor_i2c_probe s5k6b2yx probe succeeded
[ 1.318481] msm_eeprom_probe probe_fail
[ 1.352172] mmc0: No card detect facilities available
[ 1.475433] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
[ 1.475555] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
[ 1.492126] max77693_get_health_state: Fail to get psy (battery)
[ 1.494750] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
[ 1.496337] max77693_get_health_state: Fail to get psy (battery)
[ 1.498901] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
[ 1.537536] mmc0: msmsdcc_execute_tuning: found good phase = 0
[ 1.537689] mmc0: msmsdcc_execute_tuning: found good phase = 1
[ 1.537841] mmc0: msmsdcc_execute_tuning: found good phase = 2
[ 1.537994] mmc0: msmsdcc_execute_tuning: found good phase = 3
[ 1.538146] mmc0: msmsdcc_execute_tuning: found good phase = 4
[ 1.538269] mmc0: msmsdcc_execute_tuning: found good phase = 5
[ 1.538452] mmc0: msmsdcc_execute_tuning: found good phase = 6
[ 1.538574] mmc0: msmsdcc_execute_tuning: found good phase = 7
[ 1.538757] mmc0: msmsdcc_execute_tuning: found good phase = 8
[ 1.538879] mmc0: msmsdcc_execute_tuning: found good phase = 9
[ 1.539062] mmc0: msmsdcc_execute_tuning: found good phase = 10
[ 1.539184] mmc0: msmsdcc_execute_tuning: found good phase = 11
[ 1.539642] mmc0: msmsdcc_execute_tuning: found good phase = 13
[ 1.539794] mmc0: msmsdcc_execute_tuning: found good phase = 14
[ 1.539947] mmc0: msmsdcc_execute_tuning: found good phase = 15
[ 1.540039] mmc0: msmsdcc_execute_tuning: finally setting the tuning phase to 7
[ 1.540802] qup_i2c qup_i2c.2: QUP: I2C status flags :0x11143c8, irq:228
[ 1.540924] qup_i2c qup_i2c.2: I2C slave addr:0x26 not connected
[ 1.617065] msm_audio_init: Not the right machine type
[ 1.922241] sec-battery sec-battery: sec_battery_probe: Failed to Enable Wakeup Source(-6)
[ 1.936584] irda_device_init called!
[ 1.937042] barcode_emul_ice4: probe complete barcode_emul_probe
[ 1.937377] brcm_wlan_power: WL_REG_ON failed to pull up
[ 1.937530] brcm_wlan_power: WL_REG_ON failed to pull down
[ 3.896179] synaptics_rmi4_i2c 3-0020: synaptics_ta_cb: device is in suspend state or reflash.
[ 3.951263] brcm_wlan_power: WL_REG_ON failed to pull up
[ 3.951416] brcm_wlan_power: WL_REG_ON failed to pull down
[ 5.961273] brcm_wlan_power: WL_REG_ON failed to pull up
[ 5.961364] brcm_wlan_power: WL_REG_ON failed to pull down
[ 8.018737] hostwake line change [BT]
[ 8.586364] mmc1: msmsdcc_execute_tuning: found good phase = 0
[ 8.586547] mmc1: msmsdcc_execute_tuning: found good phase = 1
[ 8.586669] mmc1: msmsdcc_execute_tuning: found good phase = 2
[ 8.586853] mmc1: msmsdcc_execute_tuning: found good phase = 3
[ 8.586975] mmc1: msmsdcc_execute_tuning: found good phase = 4
[ 8.587158] mmc1: msmsdcc_execute_tuning: found good phase = 5
[ 8.587860] mmc1: msmsdcc_execute_tuning: found good phase = 8
[ 8.588043] mmc1: msmsdcc_execute_tuning: found good phase = 9
[ 8.588165] mmc1: msmsdcc_execute_tuning: found good phase = 10
[ 8.588348] mmc1: msmsdcc_execute_tuning: found good phase = 11
[ 8.588470] mmc1: msmsdcc_execute_tuning: found good phase = 12
[ 8.588653] mmc1: msmsdcc_execute_tuning: found good phase = 13
[ 8.588836] mmc1: msmsdcc_execute_tuning: found good phase = 14
[ 8.588958] mmc1: msmsdcc_execute_tuning: found good phase = 15
[ 8.589080] mmc1: msmsdcc_execute_tuning: finally setting the tuning phase to 1
[ 10.129394] healthd: wakealarm_init: timerfd_create failed
[ 10.365814] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
[ 10.370635] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
[ 10.478942] init: property 'ro.product.model' doesn't exist while expanding '${ro.product.model}'
[ 10.479064] init: cannot expand '${ro.product.model}' while writing to '/sys/class/android_usb/android0/iProduct'
[ 10.479766] init: Unable to open persistent property directory /data/property errno: 2
[ 10.480194] init: Found bootloader id I9505XXUGNG8 setting build properties for jfltexx device
[ 10.482574] healthd: wakealarm_init: timerfd_create failed
[ 12.240692] [mdnie lite] is negative Mode On = 0
[ 12.240692] [mdnie lite] negative off when resume, tuning again!
[ 12.240722] [mdnie lite] mDNIe_Set_Mode start , mode(0), background(1)
[ 12.240722] [mdnie lite] = UI MODE =
[ 12.240753] [mdnie lite] = STANDARD MODE =
[ 12.240753] [mdnie lite] send tuning cmd!!
[ 12.290435] [mdnie lite] mDNIe_Set_Mode end , mode(0), background(1)
[ 12.962921] [mdnie lite] is negative Mode On = 0
[ 12.962921] [mdnie lite] negative off when resume, tuning again!
[ 12.962951] [mdnie lite] mDNIe_Set_Mode start , mode(0), background(1)
[ 12.962951] [mdnie lite] = UI MODE =
[ 12.962982] [mdnie lite] = STANDARD MODE =
[ 12.962982] [mdnie lite] send tuning cmd!!
[ 13.012664] [mdnie lite] mDNIe_Set_Mode end , mode(0), background(1)
[ 408.649932] [mdnie lite] is negative Mode On = 0
[ 408.649932] [mdnie lite] negative off when resume, tuning again!
[ 408.649963] [mdnie lite] mDNIe_Set_Mode start , mode(0), background(1)
[ 408.649963] [mdnie lite] = UI MODE =
[ 408.649963] [mdnie lite] = STANDARD MODE =
[ 408.649993] [mdnie lite] send tuning cmd!!
[ 408.699676] [mdnie lite] mDNIe_Set_Mode end , mode(0), background(1)
[ 1123.502899] [mdnie lite] is negative Mode On = 0
[ 1123.502929] [mdnie lite] negative off when resume, tuning again!
[ 1123.502929] [mdnie lite] mDNIe_Set_Mode start , mode(0), background(1)
[ 1123.502960] [mdnie lite] = UI MODE =
[ 1123.502960] [mdnie lite] = STANDARD MODE =
[ 1123.502960] [mdnie lite] send tuning cmd!!
[ 1123.552642] [mdnie lite] mDNIe_Set_Mode end , mode(0), background(1)
[ 1125.997711] SysRq : Emergency Remount R/O
[ 1126.825103] qup_i2c qup_i2c.2: QUP: I2C status flags :0x1343c8, irq:228
[ 1126.825164] qup_i2c qup_i2c.2: I2C slave addr:0x26 not connected
[ 1126.825317] MFD is Null
[ 1126.857635] Restarting system with command ''.
No errors detected
Click to expand...
Click to collapse
for brcm_wlan_power errors try to disable governator for screen off: try ondemand or interactive
for i2c-msm.c error check the file delay.h and check if never had void.... for usleep_range
Updated AICP today and I'm stuck at boot with the AICP logo... Here is what dmesg gives me:
Code:
[ 700.306266] voice_call_state_get: voice_call_state Off
[ 700.450763] msm_csid_init: CSID_VERSION = 0x30050000
[ 700.451654] msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
[ 700.460161] ====================== msm_sensor_power_up
[ 700.462547] MSM-CPP cpp_init_hardware:850 CPP HW Version: 0x60000000
[ 700.462564] MSM-CPP cpp_init_hardware:868 stream_cnt:0
[ 700.480582] msm_cci_init:1421: hw_version = 0x10040000
[ 700.480868] msm_get_otp_data: Enter
[ 700.480879] msm_get_otp_rear_camera_module_id: INFO: module_id is 0x9
[ 700.480884] msm_get_otp_rear_camera_module_id: sony_imx298 succeed
[ 700.480889] msm_sensor_match_id:imx298 OTP module id:0x9 expected module_id:0x9
[ 700.480892] msm_get_otp_data: Enter
[ 700.480896] msm_get_otp_rear_camera_vcm_id: INFO: vcm_id[0] is 0x09
[ 700.480900] msm_get_otp_rear_camera_vcm_id: INFO: vcm_id[1] is 0x05
[ 700.480903] msm_get_otp_rear_camera_vcm_id: INFO: vcm_id[2] is 0x1c
[ 700.480906] msm_get_otp_rear_camera_vcm_id: INFO: vcm_id[3] is 0x06
[ 700.480910] msm_sensor_match_id:eek:TP vcm id:0x6 expected vcm_id:0x6
[ 700.574085] msm_flash_subdev_do_ioctl:1427 Enter
[ 700.574158] msm_flash_subdev_ioctl:729 Enter
[ 700.574165] msm_flash_config:684 Enter msm_flash_config type 0
[ 700.574170] msm_flash_init:461 Enter
[ 700.574176] msm_flash_init:519 Exit<3>[ 700.574184] msm_flash_config:718 Exit msm_flash_config type 0
[ 700.574188] msm_flash_subdev_do_ioctl:1485 Exit
[ 700.590652] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
[ 700.592574] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
[ 700.592631] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
[ 700.592682] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[ 700.592687] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
[ 700.592733] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[ 700.592737] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
[ 700.592787] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
[ 700.592837] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
[ 700.592884] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[ 700.592888] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
[ 700.592935] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[ 700.592939] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
[ 700.594567] msm_flash_subdev_do_ioctl:1427 Enter
[ 700.594582] msm_flash_subdev_ioctl:729 Enter
[ 700.594589] msm_flash_config:684 Enter msm_flash_config type 1
[ 700.594596] msm_flash_off:401 Enter
[ 700.594616] msm_flash_off:413 Exit
[ 700.594621] msm_flash_config:718 Exit msm_flash_config type 1
[ 700.594626] msm_flash_subdev_do_ioctl:1485 Exit
[ 700.596206] msm_pcm_volume_ctl_get substream runtime not found
[ 700.596624] msm_pcm_volume_ctl_get substream runtime not found
[ 700.597381] msm_pcm_volume_ctl_get substream runtime not found
[ 700.597536] msm_compr_audio_effects_config_get: stream or effects inactive
[ 700.598061] msm_pcm_volume_ctl_get substream runtime not found
[ 700.598219] msm_compr_audio_effects_config_get: stream or effects inactive
[ 700.598672] msm_compr_audio_effects_config_get: stream or effects inactive
[ 700.599107] msm_compr_audio_effects_config_get: stream or effects inactive
[ 700.599551] msm_pcm_volume_ctl_get substream or runtime not found
[ 700.600098] msm_pcm_volume_ctl_get substream runtime not found
[ 700.600295] msm_compr_audio_effects_config_get: stream or effects inactive
[ 700.600815] msm_compr_audio_effects_config_get: stream or effects inactive
[ 700.601322] msm_compr_audio_effects_config_get: stream or effects inactive
[ 700.601717] msm_compr_audio_effects_config_get: stream or effects inactive
[ 700.602068] msm_compr_audio_effects_config_get: stream or effects inactive
[ 700.602422] msm_compr_audio_effects_config_get: stream or effects inactive
[ 700.607901] voice_call_state_get: voice_call_state Off
[ 700.609106] tasha_codec tasha_codec: tasha_mad_input_put: mic bias source not found for input = DMIC1
[ 700.624999] msm_csid_init: CSID_VERSION = 0x30050000
[ 700.625985] msm_csid_irq CSID2_IRQ_STATUS_ADDR = 0x800
[ 700.629203] MSM-CPP cpp_init_hardware:850 CPP HW Version: 0x60000000
[ 700.629213] MSM-CPP cpp_init_hardware:868 stream_cnt:0
[ 700.633399] ====================== msm_sensor_power_up
[ 700.647059] msm_cci_init:1421: hw_version = 0x10040000
[ 700.647330] msm_get_otp_data: Enter
[ 700.647337] msm_get_otp_front_camera_module_id: INFO: module_id is 0x2
[ 700.647341] msm_get_otp_front_camera_module_id: ov8865_plus succeed
[ 700.647345] msm_sensor_match_id:ov8865_sunny OTP module id:0x2 expected module_id:0x2
[ 703.392200] PWM device already freed
[ 703.392412] PWM device already freed
[ 703.392607] PWM device already freed
Any help would be great. I have tried re-flashing the update, as well as clearing cache, etc.
Ended up resetting the device. Please ignore