Hi. I have a big Problem. I Update the mcu on my xtrons radio. But i have choose the wrong version. Anyone can me tell what the right mcu is?
I dont make a Screenshot from the original :crying:
If I'm not wrong it will be GS, and you can use latest versions like 3.xx but after that you probably will have to configure some factory options on the factory menu...
Related
Hi, fellows
I have tried to root my head unit using: KingRoot, TowelRoot, Root Master etc and every single one failed. It is something that I am doing wrong? or it is not possible.
Please help!
Aparently, not possible...
What is a "Pumpkin Android rckPX2 4.4.4?" Searching for rckPX2 on the Pumpkin website turns up nothing.
My unit is this one on their website LM-C0676-US-A GeneralS: Android 4.4 Kit KatCPU: Rockchip PX2 Cortex A9 Dual Core 1.4GHzRAM: DDR3 1GBNand Memory: 8GBAudio output: 4*45W maxScreen Resolution: 800*480 Cold Boot time: about 25-30s - See more at: http://www.autopumpkin.com/car-dvd-...-control-for-toyota.html#sthash.FlVuWSf2.dpuf
Mike the Rockchip 3066 and the Rockchip PX3 seems to be the same processor just that the 3066 is used only in consumer products and the PX2 is used for consumer products and industrial applications.
I did post the link to both processors PDF to see if somebody can compare them and determine if I can use the Malaysk room with my unit.
Thanks for your help!
Sorry is PX2 not PX3.
The first 2 characters of Pumpkin model numbers indicate the OEM. I don't know who "LM" is, but it's not one of the known manufacturers of HuiFei type units. So, Malaysk's firmware is very unlikely to work.
mike.s said:
The first 2 characters of Pumpkin model numbers indicate the OEM. I don't know who "LM" is, but it's not one of the known manufacturers of HuiFei type units. So, Malaysk's firmware is very unlikely to work.
Click to expand...
Click to collapse
Mike I was told by Pumpkin that my unit is made by Senzchen Winmark Electronics Ltd in China. I went to their website and they sell my unit under a different part number DQ6514
mike.s said:
The first 2 characters of Pumpkin model numbers indicate the OEM.
Click to expand...
Click to collapse
Do you know were I can find more info about that? I'm really with itches to flash Malaysk's firmware in my AL-C0241 or AL-5701 (they are the same unit) and I really would love to have the original firmware to put back if something goes wrong...
Unfortunately I have not being able to find a workaround solution yet. I want to flash Malaysk rom like you but I do not want to brick the unit so I keep looking and asking for help. I have read and being told the following:
a) You need to be rooted to be able to backup your original rom.
b) You cannot go back to 4.2 either.
So the only solution is to find someone that can look in my case to both processors the rk3066 and rkpx2 and respond yes they are the same go ahead and do it.
Georgetech said:
Unfortunately I have not being able to find a workaround solution yet. I want to flash Malaysk rom like you but I do not want to brick the unit so I keep looking and asking for help. I have read and being told the following:
a) You need to be rooted to be able to backup your original rom.
b) You cannot go back to 4.2 either.
So the only solution is to find someone that can look in my case to both processors the rk3066 and rkpx2 and respond yes they are the same go ahead and do it.
Click to expand...
Click to collapse
How I understand you! But in my case I have the same CPU and display
nleitao said:
Do you know were I can find more info about that? I'm really with itches to flash Malaysk's firmware in my AL-C0241 or AL-5701 (they are the same unit) and I really would love to have the original firmware to put back if something goes wrong...
Click to expand...
Click to collapse
I just checked your unit in Pumpkin website and it has the rk3188 processor. Malaysk rom is for the rk3188 and 3066. If the only requirement to flash this rom is just about the processor then you should be fine but I do not know this, maybe somebody else in this forum could help with answers.
Georgetech said:
If the only requirement to flash this rom is just about the processor then you should be fine but I do not know this, maybe somebody else in this forum could help with answers.
Click to expand...
Click to collapse
I believe it's not the only but it's the most important. Come on guys, enlight the nooblets here!!! :angel:
Malaysk's firmware is meant for HuiFei type units. It is not known to work with others, even if they happen to use the same processor.
For instance, the Winlink/Ownice units (they have their own thread) will not work with Malaysk's firmware, even though some use the RK3188 and have the same resolution as some HuiFei type units.
thanks for your input Mike! this is the input that was missing.
that means I MUST put my fingers on my original firmware before try a rooted image.
Thanks again
Nuno
mike.s said:
Malaysk's firmware is meant for HuiFei type units. It is not known to work with others, even if they happen to use the same processor.
For instance, the Winlink/Ownice units (they have their own thread) will not work with Malaysk's firmware, even though some use the RK3188 and have the same resolution as some HuiFei type units.
Click to expand...
Click to collapse
Thanks Mike!
That closes this chapter. Next option is to learn how to code.
Thanks
Georgetech
Some posts moved to new thread:
http://forum.xda-developers.com/android-auto/android-head-units/al-c0241-al-5701-t3229364
My 2 cents
I would just try to install the rk3066 version of the ROM and see if it works. I don't think you will have a problem, it should work.
I accidentally was trying to install the wrong one on my radio and it just didn't install didn't mess anything up.
Unzip the Rom and put it on a SD card with nothing else on it.
Put the SD card into the GPS sd card slot while the headunit is on and it will pop up a box saying it found a update or something and
just reboot the until and it should start installing it.
Well at least this worked on mine. Just do it you don't need the old ROM. Hope this helps
Hi all, I've a similiar car unit, same CPU, same screen resolution, I've found a link to sownload an original rom:
http://www.autopumpkin.com/pumpkin-...i-odb2-steering-wheel-control-for-toyota.html
and here direct link:
https://mega.nz/#F!UE9ElapD!A-uTerI11qQ86r2ModVnyg
inside there are both firmware and mcu, but I didn't find something to dump it to explore system files, from images seem to be better than MCU I have mounted on mine (specific Fiat Punto Evo car unit), I cannot Root it, cannot install CWM (bad update.zip message!), please, there is someone that can suggest me with (if there are) utility to use to dump it? it will be interesting also to investigate about it, to try to find some easy ways to root kk 4.4.4 rockchip px2 devices.
Thanks in advances.
here some sources: (JB)
http://www.marsboard.com/marsboard_rk3066_download.html
I rooted mine very easy with couple key presses. There is a youtube video of it, takes 30 seconds
Hi to all, i´m new here.
I have a headunit with this original specs from my notes:
Processor Type
QuadCore-R16 1.6G
Android version
5.1.1
MCU Version
5.3.19-7-10-656201-160925
System Version
4.5.10_20160909
Trying to update ROM accidentaly flash MCU with a firmware update that include MCU update and now radio, bluetooth and buttons don´t work.
I have a friend with the same headunit (bought at the same time and vendor).
Please if someone have a flash dump of my version (or update compatible) or maybe know a way to dump MCU flash with an apk or something.
Thanks a lot for help.
Best regards.
Hello ,
do you find a solution ? I have the same problem but mybe a different headunit. Normal MCU update does not work with all files i found.
best regards
Olaf
danielafs said:
Hi to all, i´m new here.
I have a headunit with this original specs from my notes:
Processor Type
QuadCore-R16 1.6G
Android version
5.1.1
MCU Version
5.3.19-7-10-656201-160925
System Version
4.5.10_20160909
Trying to update ROM accidentaly flash MCU with a firmware update that include MCU update and now radio, bluetooth and buttons don´t work.
I have a friend with the same headunit (bought at the same time and vendor).
Please if someone have a flash dump of my version (or update compatible) or maybe know a way to dump MCU flash with an apk or something.
Thanks a lot for help.
Best regards.
Click to expand...
Click to collapse
go to car settiing -> extra option -> pass 123456 -> set up button stereo function (such as wheel button key but it for dvd dashbroad).... and more thing in there such as radio region, model car ( it set up system to right model of your car).
Hi
I just received my new Chinese head unit
And it came with android 9 (i suppose fake but i dont know).
I originally have head unit with android 8 and more importantly a nice working launcher (ui08)
I want to change my rom to the old one and im not sure which guide to follow because i dont want to break my unit
Please help.
I attached 2 photos
One of my currect unit and the second one of the rom i want to have.
Any suggestions?
Maybe frimware from this website?
XYAUTO
file manager
file.xygala.com
If yes than how to install?
Any help is highly appreciated
Hello everyone,
Firstly, sorry for my bad english i'm french ....
I'm searching explanations and any help about strange things on my first android head unit (replacing my Audi RNSE in my S3 2007)
I bought an XTRONS IB80A3ALN last week
Works like intended but need more personalisation so i decide to flash with HAL9K ROM.
Flash works properly but when unit reboot got a black screen with some white bars moving on the screen and unit stay like this, can't see anything.
I try many things like recovery, same black screen and i don't do a dump before flashing, my fault i discover .....
But before flashing i take some screenshot to show to my brother.
First thing, serial number on the sticker and in the About are not the same, is it normal ?
Second thing, in the About model it's PX5(1280x720) but according to XTRONS website it's 1024x600, is it normal ?
Third thing (and i make lot's of research here) the MCU in the About show MTCH_LM_V3.75_1, but according to my research LM is for Erisin/Pumpkin not for XTRONS which should be GS, right or not ?
So i'm confused with this unit, i ask my reseller and XTRONS support, no one respond since 5 days, would get at least original stock firmware and mcu to try to flash.
I search a proper firmware and MCU but nothing (could latest MTCE be flashed on a MTCH ???)
I am able to enter MASKROM and dependind to which uboot and recovery.img i flashed i'm able to get fastboot working through usb, but always with black screen
Any explanations/help/files will be very appreciated
With my best regards,
Thibaut
Thibs24400 said:
Hello everyone,
Firstly, sorry for my bad english i'm french ....
I'm searching explanations and any help about strange things on my first android head unit (replacing my Audi RNSE in my S3 2007)
I bought an XTRONS IB80A3ALN last week
Works like intended but need more personalisation so i decide to flash with HAL9K ROM.
Flash works properly but when unit reboot got a black screen with some white bars moving on the screen and unit stay like this, can't see anything.
I try many things like recovery, same black screen and i don't do a dump before flashing, my fault i discover .....
But before flashing i take some screenshot to show to my brother.
First thing, serial number on the sticker and in the About are not the same, is it normal ?
Second thing, in the About model it's PX5(1280x720) but according to XTRONS website it's 1024x600, is it normal ?
Third thing (and i make lot's of research here) the MCU in the About show MTCH_LM_V3.75_1, but according to my research LM is for Erisin/Pumpkin not for XTRONS which should be GS, right or not ?
So i'm confused with this unit, i ask my reseller and XTRONS support, no one respond since 5 days, would get at least original stock firmware and mcu to try to flash.
I search a proper firmware and MCU but nothing (could latest MTCE be flashed on a MTCH ???)
I am able to enter MASKROM and dependind to which uboot and recovery.img i flashed i'm able to get fastboot working through usb, but always with black screen
Any explanations/help/files will be very appreciated
With my best regards,
Thibaut
Click to expand...
Click to collapse
You should be able to install Malaysk ROM which will solve all of your problems.
Thanks, i will try later, not sure how to flash Malaysk rom in maskrom
Thibs24400 said:
Thanks, i will try later, not sure how to flash Malaysk rom in maskrom
Click to expand...
Click to collapse
It's really simple. Find the appropriate Malaysk ROM thread here on XDA and follow the instructions
Ah yes i have the rom, my main problem is that the screen show only black and some white column moving
Thibs24400 said:
Ah yes i have the rom, my main problem is that the screen show only black and some white column moving
Click to expand...
Click to collapse
Did this happen by itself or you did you do a firmware update?
By itself when i power up my car
Thibs24400 said:
By itself when i power up my car
Click to expand...
Click to collapse
If you are still within 12 months warranty, just return it.
Yes sure it would be better but because when in reverse gear the screen works i'm searching solution waiting for xtrons to allow me to return the unit ........
Hallo. Got a question, can someone help me find a firmware for this unit?
I have ben searched in many sites but cant find a firmware for this radio.
the problem ist i got only one Theme to choose and its very crappy.
Thanks!
maybe any idea how can i add UI´s for this unit ?
Hey, i think i can help you with firmware, do you still need it?
Hi can you help me with this radio. gives everything in attachments. I would like to update them, it's getting worse and worse.
the radio loses its sound when i put it in reverse it comes back on. there is no communication with canbus