Database Users

[100% tested] ZTE Nubia Z9 Mini Official Indian Rom & Root Guide With Software

Hi Guys
First of all I will request to moderator of this forum to create ZTE 9 development section and put this post there.
Official Indian Rom for Nubia Z9 Mini (in any case if you don't like any ROM you can always switch to this one using TWRP )
**Official Nubia Z9 Mini Indian Version ROM Direct Download**
So guys after a lot of googling finally i was able to find a custom recovery and root tool for ZTE Nubia Z9 Mini and maked it to work for me and sharing same with you guys who want to root their Z9 mini and wanna taste some custom rom over Nubia UI here you can download One Click Root & custom Recovery (TWRP English Version) Tool for ZTE Nubia Z9 Mini.
just download the tool from Given link and Fallow instruction and you will be able to successfully able to root your phone and can install custom recovery based on TWRP
1-Download the File from Given Link and Extract it in your Desktop
2 you can see Given File list in Extracted Folder :-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3- Enable USB Debugging On your Phone and connect it to your PC ( for USB debugging fallow step below in image )
4- Now click and run ThemePush.bat from extracted folder and you can see Below screen with option .
Now just Choose a no given in toolbox to perform the task . just input no and hit enter
this tool has default recovery too if sometime you want to gonna back to Nubia deafult recovery just install original Recovery.
here Is TWRP recovery screenshot its themed version so don't get confused .
Tool Download Link
Click to expand...
Click to collapse
Click Here To download One Click Tool
you can also checkout some ROMS i have found Working below :-
i would like to thnx to modify the recovery to work with nubia z9 mini (Cuoco92 an italian developer ) and Translator of tool (travelbug)
**Note :- for upgrading your nubia Rom to V3.50 and Higher you have to install new TWRP Recovery Version 2.8.7.0 **
*Flashable TWRP V 2.8.7.0 With Advance Modes*
*** Nubia Z9 Mini Rom V 3.87 for International carrier support works for Indian Networks !! ***
Link :-Nubia ROM with all feature working and supports Indian Network
thanks to @Cuoco92 for sharing this wonderful multi language Rom ​

thanks for this tool
...its usefull
---------- Post added at 12:30 PM ---------- Previous post was at 12:29 PM ----------
please give me indian version stock firmware link.......my internet is not work on chines roms

vijay2 said:
thanks for this tool
...its usefull
---------- Post added at 12:30 PM ---------- Previous post was at 12:29 PM ----------
please give me indian version stock firmware link.......my internet is not work on chines roms
Click to expand...
Click to collapse
hi Vijay
i dont have official indian ROM yet but i created a nandroid backup of my rom which is Indian and Pre rooted u can use "Nandroid Manager * ROOT" software from play store to restore this nandroid backup and resolve ur network issue problem and do not forget to make backup of ur data as your phone will be restored to factory defaults link updated in post check and download

dear hydrnoide,,,thanks for reply.....your nandroid back gives me errror....when am goes to archieve......he gives me error ....archieve no 1,2,5.........check your archive please...

vijay2 said:
dear hydrnoide,,,thanks for reply.....your nandroid back gives me errror....when am goes to archieve......he gives me error ....archieve no 1,2,5.........check your archive please...
Click to expand...
Click to collapse
uploaded again buddy download and check

yeah..its 100% perfect...thanks

keeps saying fastboot is not recognized???
---------- Post added at 12:26 PM ---------- Previous post was at 12:19 PM ----------
phone has to be in PTP usb mode not MTP usb mode and double click on themepush and then hit run don't run as administrator.

Has anyone managed to get Google apps installed on the CM 12.1 ROM for the Z9 Mini? If so, how?
edit: nm, figured it out, been a little while since I've used CM. You need to download the GApps zip from CM, make sure it's the 64bit version, than install it via Recovery.

Vijay. Have done exactly what you suggested. Changed USB debugging to PTP from MTP etc... Still shows error fastboot not recognized when I'm on #2. . Any thoughts or suggestions?
---------- Post added at 03:11 AM ---------- Previous post was at 03:07 AM ----------
Appreciate some suggestions as I have done what you suggested.. PTP I instead of MTP etc...still get fast boot not recognized when I go to step 2. Gotta be missing something?

I see that on your download link for roms is a 12.1 cm rom, is that one working? I can't find anything about it on the Internet.
Sent from my NX511J using XDA Free mobile app

murdocknl said:
I see that on your download link for roms is a 12.1 cm rom, is that one working? I can't find anything about it on the Internet.
Click to expand...
Click to collapse
It's unofficial, comes from a Chinese forum. It does mostly work, however I've now removed it because it disables the backlighting for the back and menu capacitive keys and you lose access to a few features from the stock ROM, like the excellent camera app.

Any fully working Custom ROM?
I have tried many custom ROMS like CM 12.1, MIUI etc and finally have reverted to the latest factory V1.19(Chinese version) as the breathing lights and Nubia camera functions do not work on the custom ROM's . But even on the factory based ROM I have faced one major issue. I am using BSNL and iDEA sims. I am not able to enable 3G on my BSNL sim and the only combo where I can use 3G is when i use iDEA as the first sim. the 3G/2G changing does not seem to work fluently...It stubbornly stays on 2G and sometimes even when 3G is enabled on BSNL, I do not see any data even if I try to turn the data slider on. Has any one come across such issues? Everything started after I rooted my phone and tried to install custom ROM's. Now even when i flash the factory ROM these weird issues remain...

yeah cm has camera issue video recording does not work

You also have to checkmark the box on your phone! when USB debugging is turned on.
Go into setting about phone. tap build number like 7 times. then press back once the click more then you should see a new menu called developer options. click on the and scroll to usb debugging then once the slider is blue a window should pop up on your phone tick allow all the time and that wool should now work!
or try a different USB port in computer and a different cable. Make sure drivers are installed. and phone has to be connected to computer with you being able to access its root folder first.
---------- Post added at 11:41 AM ---------- Previous post was at 11:40 AM ----------
52smitty said:
Vijay. Have done exactly what you suggested. Changed USB debugging to PTP from MTP etc... Still shows error fastboot not recognized when I'm on #2. . Any thoughts or suggestions?
---------- Post added at 03:11 AM ---------- Previous post was at 03:07 AM ----------
Appreciate some suggestions as I have done what you suggested.. PTP I instead of MTP etc...still get fast boot not recognized when I go to step 2. Gotta be missing something?
Click to expand...
Click to collapse
try a different USB port in computer and a different cable. Make sure drivers are installed. and phone has to be connected to computer with you being able to access its root folder first.

Hello ,
Does the Indian Rom support multilanguage or just English ?
Thanks .

This will work fine with the new official v3.10 rom? Which gapps package do I need to flash?

realy good job !!!
it's works very well
thank you very mouch bro .

@hydronoide Can i use this for Nubia Z9 NX508J?
Sent from my SM-A500H using Tapatalk

BinMgen said:
@hydronoide Can i use this for Nubia Z9 NX508J?
Sent from my SM-A500H using Tapatalk
Click to expand...
Click to collapse
i have no idea about this Bin may be u can give a try to this but before doing anything make a backup of your device.

BinMgen said:
@hydronoide Can i use this for Nubia Z9 NX508J?
Sent from my SM-A500H using Tapatalk
Click to expand...
Click to collapse
Hi,
unfortunately not!
I'm searching to custom recovery for NX508J..but for now nothing that works good!

H420/H422 ROMs/Kernels/Recoveries and flash guide

When compiling ROMs it is advised to use H324 source because it's not so broken and is universal for single/dual sim.
Kernel in development(fixes, etc.) by vitek999 @ 4PDA
https://github.com/vitek999/LGE_H324_Kernel_3.10.54
ROMs for now:
Lollipop (all roms don't have a working hotspot, maybe something minor):
djperya @4pda
AOSP
Exception OS
lol_max_lik @4pda
RessurectionRemix
Dr.Leo6565 @4pda
BlissPop 4.0.3
AICPv10
CM12.1, needs patch, quite buggy
Marshmallow UI
Platinum L
Remix UI
Custom Mod H422
DoogeeOS
VibeUI
ZenUI
Sony Z4 Mod
LivUI
X-Pop
NovaUI
Sensetion OS
Xplay OS
DJUMANJI 4.0
ColorOS
Igronafr229 @4pda
GreatAOSP ROM
CleanPOP 7.0.2
Sense7
ROM galaxy note 5
LP Prime
AisakaYui @4pda
Stock, TWRP flashable
Marshmallow (extremely buggy, headphones don't work at high volumes, cameras barely work):
Dr.Leo6565 @4pda
CrDroid
AICPV11
Igronafr229 @ 4pda
CM13
Kernels for now:
OptiSmartKernel
How to flash?
Best method is MTK FlashTool(download)
Grab uboot (This is for devices that have android 5.0 on them, should work for all models, tested on my H420 and works)
Grab TWRP 3.0
1. Unzip Flashtool.
2. Get recovery.img and uboot.img from recovery and uboot zips.
3. Open flash-tool.exe
4. Select scatter file. which is in the same folder as flash-tool.exe
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Select your uboot and recovery.img click on the highlighted, it will open the file picker.
6. Turn off your phone, plug in usb cable in the computer.
7. Click the download button in flashtool, plug the usb cable.
8. Wait for it to say ok.
DONE!
To enter recovery:
1. Turn phone off.
2. Hold power and volume down
3. When screen turns on, let go of the buttons and quickly hold them again.
4. A menu should appear about factory reset. Don't worry, it won't since the recovery is custom.
5. Select yes using volume keys, you'll need to do it two times.
6. Voila!
To root stock 6.0, download this and place files in flashtool like in the guide above, just pick the files and flash. (recovery.emmc.win = recovery; logo.emmc.win = logo etc.) afterwards you can go ahead and get a magisk zip and flash it (it needs to be modified to be able to patch our device, thanks to the people @ 4pda for being so helpful) here
CREDITS:
Vitek999 for kernel and being very helpful
djperya for flashtool and being very helpful
Everyone else for the ROMs, thanks guys!

Kicka$$ stuff.

Tomo123 said:
Kicka$$ stuff.
Click to expand...
Click to collapse
Thanks, now that I have a working kernel source I'll make my own. Also overclocking will be very easy.

excuse me for my ignorance. Will this work with h440n?

Korelev said:
excuse me for my ignorance. Will this work with h440n?
Click to expand...
Click to collapse
No, these are completely different devices.

Aosp 5.0.2 language
hello today I installed the ROM AOSP 5.0.2 on my lg H420 and noticed that not had my language ( Portuguese - Portugal ).
Already I installed an application to change my language but some aplications as the system continue in English.
someone can give me a hand?

Thyago Vergueira said:
hello today I installed the ROM AOSP 5.0.2 on my lg H420 and noticed that not had my language ( Portuguese - Portugal ).
Already I installed an application to change my language but some aplications as the system continue in English.
someone can give me a hand?
Click to expand...
Click to collapse
Which applications are these? I think that some applications can use only English language.

polfrank said:
Which applications are these? I think that some applications can use only English language.
Click to expand...
Click to collapse
System apps like "phone" "settings" "contacts" "messaging"....
please i need to fix !!!

hello
my phone when i power off and when i put the cable dont do nothing just charge the phone...
can you helpe me?i have debbuging on and i try also off

anatol55 said:
hello
my phone when i power off and when i put the cable dont do nothing just charge the phone...
can you helpe me?i have debbuging on and i try also off
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B_UKqVTCg2_xMUo2XzRzaWVaSzQ/view?usp=drive_web install this

Guys can i unlock bootloader of my lg h442

mayankjet said:
Guys can i unlock bootloader of my lg h442
Click to expand...
Click to collapse
yes just flash it as told to. There's even CM13 (android 6.0.1) just look up the 4pda thread.

so if i update h420 to marshmallow i'll still be able to flash it with this method and gain root access?

+&o_o said:
so if i update h420 to marshmallow i'll still be able to flash it with this method and gain root access?
Click to expand...
Click to collapse
forget my last question (kinda stupid). i have a problem if you guys could help me would be great. after flashing everything succesfully on the phone, wich is a spirit H420, under phone info now i get H422. it wouldn't be a problem if only i could flash the marshmallow kdz meant for the H420, but the installation process via LGUP doesn't even start. i've seen interesting stuff on 4pda, maybe i could find H420 lollipop stock there? to start from scratch before updating?
can anyone help me to revert the phone info?

+&o_o said:
forget my last question (kinda stupid). i have a problem if you guys could help me would be great. after flashing everything succesfully on the phone, wich is a spirit H420, under phone info now i get H422. it wouldn't be a problem if only i could flash the marshmallow kdz meant for the H420, but the installation process via LGUP doesn't even start. i've seen interesting stuff on 4pda, maybe i could find H420 lollipop stock there? to start from scratch before updating?
can anyone help me to revert the phone info?
Click to expand...
Click to collapse
In my case, I tried to upgrade my H420 from LP to MM via lg Mobile support tool or lg pc suite, but neither does the trick, constantly getting error. I have the MM .kdz file that is named as "H42020C_00_0530" but I tried to flash it through lg flashtool 2014, this one in vain too. What I should do to get Marshmallow? Thanks!

paulalastor said:
In my case, I tried to upgrade my H420 from LP to MM via lg Mobile support tool or lg pc suite, but neither does the trick, constantly getting error. I have the MM .kdz file that is named as "H42020C_00_0530" but I tried to flash it through lg flashtool 2014, this one in vain too. What I should do to get Marshmallow? Thanks!
Click to expand...
Click to collapse
apparently marshmallow can't be flashed using flashtool 2014, in 4pda there's a link to this video. the video is in russian, but to put it simply: go to lg site of your country, go to support, find your device, download drivers and "LG support tool" wich is a new version of the 2014 flash tool, install both of them, insert the phone turned on because the software needs to recognise the model of the phone. it will find the upgrade, "the phone may reboot, do not disconnect etc.", sadly it will go through the process of downloading the update from the internet, so no use of our kdz.
i've managed to get untill "upgrade available" step using a mobile connection, but since the firewall of my university is filtered (and beside the weight of the file, my phone would reboot, so no tethering) i can't update now. as soon as i get to a private connection i'll try. let me know if you succeed.

+&o_o said:
apparently marshmallow can't be flashed using flashtool 2014, in 4pda there's a link to this video. the video is in russian, but to put it simply: go to lg site of your country, go to support, find your device, download drivers and "LG support tool" wich is a new version of the 2014 flash tool, install both of them, insert the phone turned on because the software needs to recognise the model of the phone. it will find the upgrade, "the phone may reboot, do not disconnect etc.", sadly it will go through the process of downloading the update from the internet, so no use of our kdz.
i've managed to get untill "upgrade available" step using a mobile connection, but since the firewall of my university is filtered (and beside the weight of the file, my phone would reboot, so no tethering) i can't update now. as soon as i get to a private connection i'll try. let me know if you succeed.
Click to expand...
Click to collapse
No way with lg support tool, it didn't pass over the download of the firmware, just give error. I resolved following (by google translate) this: http://4pda.ru/forum/index.php?showtopic=686154&st=2500#entry50284916, then the green colored link Прошивка android 6.0 с нуля через LG Flashtool, finally download the attachment named H422, about 1,1 Gb. But the guide assumes that you utilize a firmware with .dz extension, not .kdz...We need an extractor/converter, just get this http://forum.xda-developers.com/attachment.php?attachmentid=3136613&stc=1&d=1422375946.
Then, if you have, like me, downloaded the v20c MM stock firmware from a site like this: http://lg-phone-firmware.com/index.php?id_mod=190, just extract the two files needed to flash our H420: "LGUPc.dll" and "H42020c00.dz". I hope I've explained myself well or almost....:silly:
If needed, just ask. I'm pretty happy with my solution.:victory:
---------- Post added at 08:22 PM ---------- Previous post was at 08:19 PM ----------
I'm just searching/waiting now for root process...

paulalastor said:
No way with lg support tool, it didn't pass over the download of the firmware, just give error. I resolved following (by google translate) this: http://4pda.ru/forum/index.php?showtopic=686154&st=2500#entry50284916, then the green colored link Прошивка android 6.0 с нуля через LG Flashtool, finally download the attachment named H422, about 1,1 Gb. But the guide assumes that you utilize a firmware with .dz extension, not .kdz...We need an extractor/converter, just get this http://forum.xda-developers.com/attachment.php?attachmentid=3136613&stc=1&d=1422375946.
Then, if you have, like me, downloaded the v20c MM stock firmware from a site like this: http://lg-phone-firmware.com/index.php?id_mod=190, just extract the two files needed to flash our H420: "LGUPc.dll" and "H42020c00.dz". I hope I've explained myself well or almost....:silly:
If needed, just ask. I'm pretty happy with my solution.:victory:
---------- Post added at 08:22 PM ---------- Previous post was at 08:19 PM ----------
I'm just searching/waiting now for root process...
Click to expand...
Click to collapse
DONE! thanks mate! owe you one
a clarification to anyone who might come here: the 2013 version of lg flash tool, wich is required for this guide is contained in the H422.rar of the russian guide. it took me a couple of minutes to understand. also i didn't understand the part of the green link, but i managed to update anyway, so i think your advice is pretty clear.
i'm not sure if this kind of update was needed for my device (didn't try upgrade tool), but since it was succesfull for you, i already posses the .kdz and i'm on a limited connection, i decided to give it a try...and SUCCESS!
already like marshmallow, hope memory leak doesn't affect our devices, and can't wait for root!

Some ROM`s
crDroid Android (6.0.1) - ttp://4pda.ru/forum/index.php?showtopic=686154&view=findpost&p=50064727
CyanogenMod 12.1 (5.1.1) - ttp://4pda.ru/forum/index.php?showtopic=686154&view=findpost&p=50327122
CyanogenMod 13 (6.0.1) - ttp://4pda.ru/forum/index.php?showtopic=686154&view=findpost&p=49486910
Blisspop (5.1.1) - ttp://4pda.ru/forum/index.php?showtopic=686154&view=findpost&p=50521514
AICP v10 (5.1.1) - ttp://4pda.ru/forum/index.php?showtopic=686154&view=findpost&p=50521514
Ressurection Remix (5.1.1) - ttp://4pda.ru/forum/index.php?s=&showtopic=686154&view=findpost&p=50521997

marshmallow root
quick update for you guys. it appears that on 4pda someone has managed to get permanent root.
here's the http://4pda.ru/forum/index.php?showtopic=686154&st=3180#entry50879512 link

[ZE550KL] Bootloader Unlocked - Still Can't install CM13

Hello, n00b here! so I am having this huge problem in my hands right now.
I unlocked my bootloader in my 1.16.40, after tons and tons of tries.
So after checking that everything was okay, I flashed TWRP recovery and opened it, however it constantly failed to install the latest CM13 version.
So, wrongly I decided to do an advanced wipe and get rid of everything on the internal storage, then I tried to install CM13 again and failed.
at this point, I obviously was stuck between TWRP recovery and Fastboot, which shouldn't be a problem.
Now I don't know what to do, I can't install CM13 because of: assert failed asus.verify trustzone (which I have no idea how to fix)
So, almighty XDA forum members, how can I install CM13 on my cellphone?

PS: forgot to mention I unbricked my cellphone by going back to 1.16.40, I couldn't install 21.40 or any MM version.
Question: Do I actually need to install 21.40 in order to install CM13?

You must in MM base firmware, than u can flash CM13... I think

Yes, you need to install 21.40 to install any CM 13 ROM built after June 14th. I had the same issue. I installed the Asus updates in this order to fix my issue.
- UL-Z00T-WW-1.16.40.763-user.zip
- UL-Z00T-WW-1.17.40.1234-user.zip
- UL-Z00T-WW-21.40.1220-1615-user.zip
- UL-Z00T-WW-21.40.1220-1794-user.zip
After the latest update is installed, you should be able to install CM 13. Hopefully this is helpful.

I have asus ze550kl mashmellow but i cant install cm13 why its show error
---------- Post added at 04:48 PM ---------- Previous post was at 04:42 PM ----------
I have asus ze550kl running 9n mashmellow latest version can i install cm13 on my device reply me fast
---------- Post added at 04:51 PM ---------- Previous post was at 04:48 PM ----------
If yes then how to install it pls reply i try many method and waste my many gb downloading cm13 various version and also rescuration rom but its allso show error in installing its say md5 not found or its say asus verifyzone.....bla bla installing zip failed show me how to install cm13 on my mashmellow asus ze550kl
---------- Post added at 05:23 PM ---------- Previous post was at 04:51 PM ----------
OC-Hiro said:
Yes, you need to install 21.40 to install any CM 13 ROM built after June 14th. I had the same issue. I installed the Asus updates in this order to fix my issue.
- UL-Z00T-WW-1.16.40.763-user.zip
- UL-Z00T-WW-1.17.40.1234-user.zip
- UL-Z00T-WW-21.40.1220-1615-user.zip
- UL-Z00T-WW-21.40.1220-1794-user.zip
After the latest update is installed, you should be able to install CM 13. Hopefully this is helpful.
Click to expand...
Click to collapse
Df
---------- Post added at 05:26 PM ---------- Previous post was at 05:23 PM ----------
How to install cm13 give me instruction to do it

If you have a ze550kl, your version is z00L.
On the page https://wiki.cyanogenmod.org/w/Install_CM_for_Z00L follow the directions under "Installing CyanogenMod from recovery" to install CM 13.
If your install fails due to asus.verify_trustzone failures, you will need to update the phones firmware to 21.40.1220 before installing CM 13. My phone did not allow me to update to 21.40.1220 until I updated to 1.17.40. I couldn't update to 1.17.40 until I updated to 1.16.40. The firmware is available through the Asus website.

I have latest mashmellow version
can i install cm13 now

itsmrich said:
I have latest mashmellow version
can i install cm13 now
Click to expand...
Click to collapse
U must unlock the bootloader first!!

How to unlock bootloader of asus ze550kl mashmellow

How to install by twrp or stock recovery

Hey bro! I'm using ASUS ZenFone 2 laser (z00ld).....with a great struggle i have unlocked my boot loader and installed TWRP ..... now the main problem is that i cannot install any custom rom ....even the official updates.......when i try to install a custom rom it ends saying "error 7 installing the zip file" bla bla bla.....what should i do......please help me bro.... hope you would reply soon......and I'm attaching a screenshot of my firmware for further information ......
Thanks?
Sent from my ASUS_Z00LD using XDA Free mobile app

sonuronith said:
Hey bro! I'm using ASUS ZenFone 2 laser (z00ld).....with a great struggle i have unlocked my boot loader and installed TWRP ..... now the main problem is that i cannot install any custom rom ....even the official updates.......when i try to install a custom rom it ends saying "error 7 installing the zip file" bla bla bla.....what should i do......please help me bro.... hope you would reply soon......and I'm attaching a screenshot of my firmware for further information ......
Thanks?
Click to expand...
Click to collapse
Error 7 can indicate multiple issues. It could be an incompatible ROM to your hardware. It could also be an incompatible firmware version to the ROM. My issue was incompatible firmware and I had to update it before installing a custom ROM.
Do you get an error similar to this when updating the ROM? "Can't install this M package (Fri Jul 22 04:15:16 CST 2016) L less than 20160426 build (Mon Feb 22 09:53:24 EST 2016)"
---------- Post added at 03:41 PM ---------- Previous post was at 03:40 PM ----------
itsmrich said:
How to install by twrp or stock recovery
Click to expand...
Click to collapse
Follow the directions in section labeled "Unlock and Install a Custom Recovery on the Zenfone 2 Laser (720p)" on the page https://wiki.cyanogenmod.org/w/Install_CM_for_Z00L

Install latest version of twrp then try.Even I had the same problem

Yeah.....i got same like you........so should i update my firmware .......if yes.....then to which version should i update........reply soon......thanx☺
Sent from my ASUS_Z00LD using XDA Free mobile app
---------- Post added at 09:56 AM ---------- Previous post was at 09:51 AM ----------
After installing latest version of twrp .......are you able to flash new roms.......reply soon bro......please.....
Sent from my ASUS_Z00LD using XDA Free mobile app

Check this
If you're running LP firmware it should fail saying that "asus.verify_trustzone" assert has failed.
In order to update your firmware to MM, you can either flash ASUS MM rom in stock recovery or flash a package that will update your FW using TWRP
Link -> androidfilehost.com/?fid=24671318762849138
Click to expand...
Click to collapse
Simply put "https://www" before the link otherwise it won't work

[GUIDE] [MM & NOUGAT] P9000 Dualboot

Our device is officially supported for dualboot using the app Dualboot Patcher, it allows to dualboot multiple android version, example LineageOS and AOKP, unfortunately it doesnt allow Android 6.0 and 7.0 at same time due to changes in preloader. So im here to give a guide on how we can do this, it should work with any rom if its android 6 with android 6 or 7 with 7. If you like this guide you can donate to me here: https://www.paypal.me/RubenCraveiro
Any questions you might have please post below and ill be sure to try and help
Requirements:
Root and a version for dualboot.
/*Tested on: LineageOS with AOKP on 6.0 */
/* Stock Rom with Lineage on 6.0 */
So first thing you have to do is download the secondary rom of your choice, it needs to be a flashable zip, not a zip for sp flash tools.
After downloading the rom, download this apk: https://goo.gl/FBnJWG
After you installed the apk, open it go on ROMs tab and you should see this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After granting root permissions you should see the above page, press the set now button to set kernel as default.
After doing that and having the secondary rom downloaded, follow the next steps on the next images to configure the flashable zip for dualbooting.
After choosing rom continue next image.
Patch the zip now, after zip is patched go back to ROMs page and follow the next images.
After selecting the patched zip, it will ask if you want to change location, keep it, a quick info is that, if you want to add google apps to dualbooted rom, you have to patch the gapps zip and set the location to the ID(android name) you previously made of the dualbooted rom, so that it doesnt install on primary rom and flashes to the secondary rom.
You should press the ✓ button after selecting patched zip and should start installing the rom.
After it flashes simply select the rom on ROMs page and reboot, to go back to primary rom simply install the app on secondary rom.
Quick info on device name error, if the app says it cant find device name "elephone" you need to change the build prop device name "elephone" to "p9000" (case sensitive) and do a reboot after to apply changes.
Known issues:
Rotating device or leaving in background while flashing causes app to crash when reentering the app.
Special Thanks to
@chenxiaolong for the awesome DualBootPatcher.

--- Roms that should work ---
Android 6 Dualboot with LineageOS 14.1;
LineageOS 13 with LineageOS 14.1;
AOKP6 with LineageOS 14.1/LineageOS 13;
RR 6.0 with Stock Rom(6.0) / LineageOS 13/14.1;
-- Does Not Work --
Android 6 with Android 7.0 (stock roms)
Android 7 with Lineage 13/14.1
Android 7 with AOKP 6/7
Reason to why some work and some dont is because, android stock roms on 7.0 have changes in preloader that makes older roms not dualboot, if such is attempted to do. LineageOS 14.1 is Android 7.1 but it is based on old preloader so it should work with any android 6 rom. AOKP 7 is based on LineageOS 14.1 sources so it is also based on old preloader and as such should also work with any android 6 rom + LineageOS 14.1.
If you have any questions or you are unsure about anything, just ask.

will try this with official 7.0 an Eragon 5, will tell you sooner or later

Kernel
Hi i use to dual boot Eragon and Stock Rom but on eragon dual boot app says :"could not determine boot partition because this devices codename "elephone" is not recognized

aljoscha81 said:
Hi i use to dual boot Eragon and Stock Rom but on eragon dual boot app says :"could not determine boot partition because this devices codename "elephone" is not recognized
Click to expand...
Click to collapse
On buildprop change the device name to p9000(case sensitive), theres a few roms that have the name Elephone and not p9000 and need to be modified manually, but its simple and easy

Got no luck any idea?
Update it is impotant to write a little p otherwise it wont work thanks a lot

aljoscha81 said:
Got no luck any idea?
Update it is impotant to write a little p otherwise it wont work thanks a lot
Click to expand...
Click to collapse
its case sensitive i think, instead of P9000 do p9000 it should be able to find after

Found another Problem im on android 7 from needrom build 419 and want to dualboot eragon 7 but when i select the zip to patch it opens the zip. And i cant do anything from that point on i only see the files inside the zip.
Got the problem solved long press on the zip.

Sry long for time not give a feedback....managed dualboot android6 and7 but problem when using primery rom too long .... Secondary rom only got boot loop ......................i see in kernel of secondery rom every time a really old kernel 3.18.22. First. Kernel ever?
---------- Post added at 10:51 PM ---------- Previous post was at 10:49 PM ----------
It ever stand by boot animation for all time ............................. . .............................

aljoscha81 said:
Sry long for time not give a feedback....managed dualboot android6 and7 but problem when using primery rom too long .... Secondary rom only got boot loop ......................i see in kernel of secondery rom every time a really old kernel 3.18.22. First. Kernel ever?
---------- Post added at 10:51 PM ---------- Previous post was at 10:49 PM ----------
It ever stand by boot animation for all time ............................. . .............................
Click to expand...
Click to collapse
It works but stays in bootloop, thats why i said it doesnt work on different versions

Is it possible to install iOS rom with Android 7?

pimandro said:
Is it possible to install iOS rom with Android 7?
Click to expand...
Click to collapse
its only possible 6.0 with 6.0 roms and 7.0 7.0/7.1.. this is due to changes in preloader between version, and im not sire what are you talking about, an ios rom, if you talking about actual ios for an androod device, that doesnt even exist for any device.. and a skinned android i dont think it exists either, to our device at least..
Little Update: LineageOS 14.1 and AOKP 7 is based on old preloader so these work with any android 6 rom. Android Stock Rom 7.0 still does not work since its still based on a newer preloader. (This is just to help anyone that comes across this and doesnt get confused)

Ruben Craveiro said:
its only possible 6.0 with 6.0 roms and 7.0 7.0/7.1.. this is due to changes in preloader between version, and im not sire what are you talking about, an ios rom, if you talking about actual ios for an androod device, that doesnt even exist for any device.. and a skinned android i dont think it exists either, to our device at least..
Click to expand...
Click to collapse
Sorry for my ignorance.
I have android 7.0 (419) on my p9000, can I also install lineageos 14. 1?
Thank you.

pimandro said:
Sorry for my ignorance.
I have android 7.0 (419) on my p9000, can I also install lineageos 14. 1?
Thank you.
Click to expand...
Click to collapse
No you cant, unfortunatelly LOS14.1 is based on the older preloader so it only works android 6.0/AOKP6/AOKP7/RR + LOS14.1

Can I install lineageos 14.1 with android 6.0 and then update android 6.0 to official 7.0?

javier_abad2001 said:
Can I install lineageos 14.1 with android 6.0 and then update android 6.0 to official 7.0?
Click to expand...
Click to collapse
You cant, if you want to update to android 7.0 you will need to update preloader, and cm14.1/aokp7 doesnt support the updated preloader, but android 6 with los14.1 should work

And how I downgrade from Android 7.0 to 6.0 if the preloader it's not the same????

javier_abad2001 said:
And how I downgrade from Android 7.0 to 6.0 if the preloader it's not the same????
Click to expand...
Click to collapse
download the stock android 6 rom and flash it to the device using spft, with all partitions checked, it should return to android 6 and also revert the preloader to an older version, and by the way, if for some reason the device doesnt boot, go on the lineage thread and download the preloader and the other images it provides and flash them, android 6 should be able to boot and you should also be able to just flash lineage through twrp

Ruben Craveiro said:
download the stock android 6 rom and flash it to the device using spft, with all partitions checked, it should return to android 6 and also revert the preloader to an older version, and by the way, if for some reason the device doesnt boot, go on the lineage thread and download the preloader and the other images it provides and flash them, android 6 should be able to boot and you should also be able to just flash lineage through twrp
Click to expand...
Click to collapse
And this in download only, ok system update or how?

javier_abad2001 said:
And this in download only, ok system update or how?
Click to expand...
Click to collapse
just google it, plenty of guides explaining how to use sp flash tools.

[Mi 9T] DRM Info - Widevine L1 with global stable

Hello everyone,
since the Xiaomi Mi 9T comes with L1 certification, could someone test if unlocking the bootloader breaks it please ?
The check must be done on the global stable rom (through the app "DRM info") otherwise we can't understand if it's ROM or BL related.
Thanks to everyone who will collaborate. :highfive:
EDIT 09/08/19: So guys, after searching a lot and tested some stuff I think I understood how Netflix works on our Mi 9T. The device with locked bl and MIUI global can search and install netflix from the play store and also it can play video max at 720p. Yes, 720p, I chatted with Netflix and they told me that they don't guarantee FULL HD but only HD. I know it's unfair but this is their thought.
In my case, I unlocked the BL, drm info says it's still L1 but I can't download and install anymore the official app from the play store. So in this case, if you have unlocked BL and you are still on MIUI Global, like me, you have two options:
1) Download the newer version from apkmirror, it has a cool layout but it can't play videos at 1080p
2) Install this old apk and have the 1080p support
I chosed the second one, I don't care about the "ugly" layout but I can finally enjoy Netflix at 1080p on our device. Hope this message can help you.
P.S.: sadly I can't test anything about bl unlocked and custom roms, I tried that apk on other unlocked phones but it gives errors.

I will reply here, when my phone is unlocked next week.
Is this the right app:
https://play.google.com/store/apps/details?id=com.androidfung.drminfo

I_did_it_just_tmrrow said:
I will reply here, when my phone is unlocked next week.
Is this the right app:
https://play.google.com/store/apps/details?id=com.androidfung.drminfo
Click to expand...
Click to collapse
Exactly. Thanks for the collaboration, dude! Let us know

pfornaro said:
Hello everyone,
since the Xiaomi Mi 9T comes with L1 certification, could someone test if unlocking the bootloader breaks it please ?
The check must be done on the global stable rom (through the app "DRM info") otherwise we can't understand if it's ROM or BL related.
Thanks to everyone who will collaborate. :highfive:
Click to expand...
Click to collapse
It's still at L1 after bootloader is unlocked.

ron.wan said:
It's still at L1 after bootloader is unlocked.
Click to expand...
Click to collapse
Thanks a lot dude, now we know that if it switches to L3 it's rom related!

pfornaro said:
Thanks a lot dude, now we know that if it switches to L3 it's rom related!
Click to expand...
Click to collapse
Can you explain this a little bit more... ? :angel:
THX.

pfornaro said:
Thanks a lot dude, now we know that if it switches to L3 it's rom related!
Click to expand...
Click to collapse
Yes it does, after flashing global k20 becomes
Mi9t and it switches to L3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

DualPerson said:
Yes it does, after flashing global k20 becomes
Mi9t and it switches to L3
Click to expand...
Click to collapse
I think that you flashed the wrong global rom: V10.3.6.0.PFJMIXM, am I right? Actually the Mi 9T rom that has Widevine L1 enabled is the global "european" version: V10.3.7.0.PFJEUXM
I've found both the fastboot and the recovery zip, if you wanna try it out here's the links: (obviously I'm not responsable of anything that could go wrong with the flash)
fastboot:
https://bigota.d.miui.com/V10.3.7.0.PFJEUXM/davinci_eea_global_images_V10.3.7.0.PFJEUXM_20190602.0000.00_9.0_eea_eab1d1cc52.tgz
recovery:
https://bigota.d.miui.com/V10.3.7.0.PFJEUXM/miui_DAVINCIEEAGlobal_V10.3.7.0.PFJEUXM_3a2dfaaa18_9.0.zip

I_did_it_just_tmrrow said:
Can you explain this a little bit more... ? :angel:
THX.
Click to expand...
Click to collapse
The explanation is: if you unlock the bootloader and stay on global rom it won't break the Widevine L1 level

pfornaro said:
I think that you flashed the wrong global rom: V10.3.6.0.PFJMIXM, am I right? Actually the Mi 9T rom that has Widevine L1 enabled is the global "european" version: V10.3.7.0.PFJEUXM
I've found both the fastboot and the recovery zip, if you wanna try it out here's the links: (obviously I'm not responsable of anything that could go wrong with the flash)
fastboot:
https://bigota.d.miui.com/V10.3.7.0.PFJEUXM/davinci_eea_global_images_V10.3.7.0.PFJEUXM_20190602.0000.00_9.0_eea_eab1d1cc52.tgz
recovery:
https://bigota.d.miui.com/V10.3.7.0.PFJEUXM/miui_DAVINCIEEAGlobal_V10.3.7.0.PFJEUXM_3a2dfaaa18_9.0.zip
Click to expand...
Click to collapse
Tried European version but ended up in bootloop

DualPerson said:
Tried European version but ended up in bootloop
Click to expand...
Click to collapse
Maybe you should try to remove the DMVerity through TWRP:

pfornaro said:
Maybe you should try to remove the DMVerity through TWRP:
Click to expand...
Click to collapse
Thanks, will try, though I flashed Disable_Dm-Verity_ForceEncrypt_09.02.2018 after the rom flash

Ok, let us know then. I hope you'll get the L1

IMPORTANT UPDATE:
Yesterday I have unlocked the bootloader without flashing any twrp or custom rom (so I'm still on MIUI global) but nevertheless the Widevine L1 is officially gone and at the moment, the only way to have it back is to relock it. So IF YOU CARE about it don't unlock your bootloader. Cheers

I hv k20 and wanna switch to global rom...which one should i flash ,the chinese global rom or european global rom??

Unlocked bootloader and flashed magisk.
Widevine still L1
Device is Mi 9T (not k20), with EEAA ROM, the one that comes out of the box.
Great news, welll done xiaomi.
---------- Post added at 06:04 PM ---------- Previous post was at 05:35 PM ----------
Asm Nasim said:
I hv k20 and wanna switch to global rom...which one should i flash ,the chinese global rom or european global rom??
Click to expand...
Click to collapse
I guess the global stable.
you can find it along with all the verions here: https://mirom.ezbox.idv.tw/en/phone/davinci/

bihariel said:
Unlocked bootloader and flashed magisk.
Widevine still L1
Device is Mi 9T (not k20), with EEAA ROM, the one that comes out of the box.
Great news, welll done xiaomi.
---------- Post added at 06:04 PM ---------- Previous post was at 05:35 PM ----------
I guess the global stable.
you can find it along with all the verions here: https://mirom.ezbox.idv.tw/en/phone/davinci/
Click to expand...
Click to collapse
Yeah I can still see Widevine L1 but sadly the official Netflix app is not working anymore. Test it and you'll notice the same issue. So... f*** Xiaomi

pfornaro said:
Yeah I can still see Widevine L1 but sadly the official Netflix app is not working anymore. Test it and you'll notice the same issue. So... f*** Xiaomi
Click to expand...
Click to collapse
You cant installl it from playstore but you can sideload it from apkmirrors and it works perfectly on HD. At least for me its working.
Make sure on magisk safetynet pass OK and add netflix app and google play and services on Magisk hide

bihariel said:
You cant installl it from playstore but you can sideload it from apkmirrors and it works perfectly on HD. At least for me its working.
Make sure on magisk safetynet pass OK and add netflix app and google play and services on Magisk hide
Click to expand...
Click to collapse
You're right, I succesfully installed the app but sadly I tested the playback quality through "Test Patterns" on Netflix and the max resolution is 1280x720 :crying: Do you see instead 1920x1080 on the upper right corner?
I don't have Magisk since I can't keep the recovery on the phone. After a reboot it automatically restores the MIUI recovery. Could you please tell me how did you do it?

pfornaro said:
You're right, I succesfully installed the app but sadly I tested the playback quality through "Test Patterns" on Netflix and the max resolution is 1280x720 :crying: Do you see instead 1920x1080 on the upper right corner?
I don't have Magisk since I can't keep the recovery on the phone. After a reboot it automatically restores the MIUI recovery. Could you please tell me how did you do it?
Click to expand...
Click to collapse
mmm 720p is already HD, better than 540p.
and about the recovery, well I just followed the instrucctions.
flash through fastboot and boot directly (power + vol up). Change to english and go to Advanced and disable (Auto reboot after OpenRecovery...)
I even installed the last miui 10.3.8 full package through twrp.
Anyway, I dont think you need Magisk to have HD, As long as it says HD on the netflix app, youre good to go.