Eunavi head unit t8 android 8.1 root of stock rom - Android Head-Units

Some one can helpme about root recovery mode or stock rom.install.
Because i want to install official tomtom go.
Its not in play store.
I tried many thinks but not success

ufoss said:
Some one can helpme about root recovery mode or stock rom.install.
Because i want to install official tomtom go.
Its not in play store.
I tried many thinks but not success
Click to expand...
Click to collapse
I'm currently trying to get firmware for my Eunavi radio direct from Eunavi but am struggling at the moment. I will let you know if I do get it.

thanks

No answer?

ufoss said:
Some one can helpme about root recovery mode or stock rom.install.
Because i want to install official tomtom go.
Its not in play store.
I tried many thinks but not success
Click to expand...
Click to collapse
Hey. Here is the firmware for your HU.
https://drive.google.com/file/d/1DrxnbYQeyid7gNZWPFC8TsrX65cwxNSh
How to get root:
Enter the engineering menu. Record or photograph all settings!
Install Magisk manager on HU.
Extract firmware from archive to folder.
Take the file boot.img from firmware.
Patch boot.img using Magisk manager.
Replace the original boot.img with the patched boot.img (name must remain "boot.img").
Open the folder with the firmware.
Select everything in the folder and zip it (Do not archive the folder with the firmware!).
Rename zip archive to update.zip.
Need to sign the firmware
1. Install the latest jre from java.com (reboot may be required).
2. Extract files from the SingApkV2.zip archive. https://yadi.sk/d/HkS6APFt3Sb4Ek
3. Place update.zip in the same folder.
4. Run SingerScript.bat
Copy update_signed.zip to usb flash drive (format must be a FAT32) and rename to os_update.zip
Start the engine. Turn on HU. Wait for the HU to boot.
Insert usb flash drive.
Agree to update.
Wait for the update to complete (Do not touch anything! Do not stop the engine!). HU will reboot itself. Be patient. It will take a lot of time.
The first start after reboot lasts about 15 minutes!
At one's own risk.
I do not have such a HU. If you get a brick, I don’t know what to do next ...

****-jones said:
Hey. Here is the firmware for your HU.
https://drive.google.com/file/d/1DrxnbYQeyid7gNZWPFC8TsrX65cwxNSh
How to get root:
Enter the engineering menu. Record or photograph all settings!
Install Magisk manager on HU.
Extract firmware from archive to folder.
Take the file boot.img from firmware.
Patch boot.img using Magisk manager.
Replace the original boot.img with the patched boot.img (name must remain "boot.img").
Open the folder with the firmware.
Select everything in the folder and zip it (Do not archive the folder with the firmware!).
Rename zip archive to os_update.zip.
Remove all from usb flash drives (format must be a FAT32).
Copy os_update.zip to usb flash drive.
Start the engine. Turn on HU. Wait for the HU to boot.
Insert usb flash drive.
Agree to update.
Wait for the update to complete (Do not touch anything! Do not stop the engine!). HU will reboot itself. Be patient. It will take a lot of time.
The first start after reboot lasts about 15 minutes!
At one's own risk.
I do not have such a HU. If you get a brick, I don’t know what to do next ...
Click to expand...
Click to collapse
Thansk for answer.. i did all steps but installation aborted... ( see attachment)
Also in recovery mode cannor chose other menu

ufoss said:
Thansk for answer.. i did all steps but installation aborted... ( see attachment)
Also in recovery mode cannor chose other menu
Click to expand...
Click to collapse
Try to sign the file os_update.zip
Use SingApkV2.zip
https://yadi.sk/d/HkS6APFt3Sb4Ek
You need to install JRE from java.com
In recovery, try using a usb keyboard or mouse. May not work...

****-jones said:
Try to sign the file os_update.zip
Use SingApkV2.zip
https://yadi.sk/d/HkS6APFt3Sb4Ek
You need to install JRE from java.com
In recovery, try using a usb keyboard or mouse. May not work...
Click to expand...
Click to collapse
Thanks but i dont now how to that..
has a instruction??

ufoss said:
Thanks but i dont now how to that..
has a instruction??
Click to expand...
Click to collapse
1. Install the latest jre from java.com (reboot may be required).
2. Extract files from the SingApkV2.zip archive.
3. Place os_update.zip in the same folder.
4. Run from the command line
Code:
java -jar signapkv2.jar -w -v testkey.x509.pem testkey.pk8 os_update.zip os_update_signed.zip
Or edit the SingerScript.bat file and execute it.
5. Copy os_update_signed.zip to usb flash drive and rename to os_update.zip
6. Try to flash.

****-jones said:
1. Install the latest jre from java.com (reboot may be required).
2. Extract files from the SingApkV2.zip archive.
3. Place os_update.zip in the same folder.
4. Run from the command line
Code:
java -jar signapkv2.jar -w -v testkey.x509.pem testkey.pk8 os_update.zip os_update_signed.zip
Or edit the SingerScript.bat file and execute it.
5. Copy os_update_signed.zip to usb flash drive and rename to os_update.zip
6. Try to flash.
Click to expand...
Click to collapse
Thanks a lot... mission completed
After signed. update success - root success

ufoss said:
Thanks a lot... mission completed
After signed. update success - root success
Click to expand...
Click to collapse
Is that the only way to install 3d-party apps not from the playstore? (want to install my own application)
Another question - does it have any API for developers that would allow to receive CAN messages and/or get the IGN signal?

Hi ****-jones!
Can you give me the link to download this Eunavi 913 head unit please. Thank you.
https://www.aliexpress.com/item/4000674983866.html?spm=2114.12010612.8148356.6.2edc363cb3o8df

****-jones said:
Hey. Here is the firmware for your HU.
https://drive.google.com/file/d/1DrxnbYQeyid7gNZWPFC8TsrX65cwxNSh
How to get root:
Enter the engineering menu. Record or photograph all settings!
Install Magisk manager on HU.
Extract firmware from archive to folder.
Take the file boot.img from firmware.
Patch boot.img using Magisk manager.
Replace the original boot.img with the patched boot.img (name must remain "boot.img").
Open the folder with the firmware.
Select everything in the folder and zip it (Do not archive the folder with the firmware!).
Rename zip archive to update.zip.
Need to sign the firmware
1. Install the latest jre from java.com (reboot may be required).
2. Extract files from the SingApkV2.zip archive. https://yadi.sk/d/HkS6APFt3Sb4Ek
3. Place update.zip in the same folder.
4. Run SingerScript.bat
Copy update_signed.zip to usb flash drive (format must be a FAT32) and rename to os_update.zip
Start the engine. Turn on HU. Wait for the HU to boot.
Insert usb flash drive.
Agree to update.
Wait for the update to complete (Do not touch anything! Do not stop the engine!). HU will reboot itself. Be patient. It will take a lot of time.
The first start after reboot lasts about 15 minutes!
At one's own risk.
I do not have such a HU. If you get a brick, I don’t know what to do next ...
Click to expand...
Click to collapse
Thank you so much I finally rooted my Atoto S8 Ultra Plus Gen 2 but I still have a problem with google uncertified & Safetynet if you have a solution please help I’ve already tried most of magistrates module but no success again thank you

****-jones said:
Try to sign the file os_update.zip
Use SingApkV2.zip
https://yadi.sk/d/HkS6APFt3Sb4Ek
You need to install JRE from java.com
In recovery, try using a usb keyboard or mouse. May not work...
Click to expand...
Click to collapse
Hi, after trying to flash from a bootable SD card, I now have a black screen, sometimes it turns white. From the beginning, it was not possible to enter recovery in any way because the radio caught the bootloop, the connection by shorting the t8 processor resistor does not connect to the phoenix suite or is there any unbrick and putting it back on Android 8.1? Eunavi I noticed that the flash mode is blocked by shorting key 1 to ground when I try to enter recovery via the keyboard alt preent screeen " i " with a booted sd card white screen. I have run out of ideas. Do you have options to help somehow? I will be grateful

Related

[Q] How to make a system folder into a system.img

Hello XDA, I'm kind of new to ROMs etc. and would appreciate some help. I am trying to install mikegapinski's 2.3.7 ROM (v5) through fastboot and whereas in the past I have seen a boot.img and a system.img, there is a boot.img and a system folder. Is there a way to make the folder into a system.img file that I could flash onto my GT540?
In short, how do you make a system.img file out of a folder with system files in them?
hey there !
(system.img + boot.img) is for fastboot
fastboot flash boot boot.img
fastboot flash system system.img
and the (system folder + boot.img) is for recovery
use any recovery
select zip from sdcard
select the zip
i dont think you can convert the folder to a .img(or the other way around) . and if the rom you are talking about mike's aosp v5 then i wont recommend it as for now there are problems with the ram and so it becomes very laggy. i would recommend mur4iks swiftdroid asis but the choice is yours
I know you can 'extract' images using 'unyaffs' but I never made an image from a folder (except when dumping partitions). I think there is a way though.
If you have Linux on your PC, then you can use the 'yaffs' tool. Search it on Google.
This is how even AOSP compiles system folder into system.img
Sent from my LG GT540 Swift using XDA App
I list found this. Should work!
http://db.tt/ROQSWTW6
Sent from my LG GT540 Swift using Tapatalk
can someone please help me to make system.img from system extraxted folder.
my phone its dead and i can find right rom for it
allway hang on boot logo
Please
link for download
https://www.dropbox.com/s/c99ashouw0fb4hp/system.rar
PS
will if neeed no problem
I got it. If you use Linux, you can create an iso file of the system folder, and then convert it to .img. Just follow it:
In a terminal(CTRL+ALT+T):
Code:
mkisofs -o /path/to/the/system/folder ~/system.iso
dd if=~/system.iso of=~/system.img
rm ~/system.iso
Your system.img will be on your home directory.
and it work's too ? (when you flash it from fastboot)
y2yu said:
can someone please help me to make system.img from system extraxted folder.
my phone its dead and i can find right rom for it
allway hang on boot logo
Please
link for download
https://www.dropbox.com/s/c99ashouw0fb4hp/system.rar
PS
will if neeed no problem
Click to expand...
Click to collapse
pls if you find a solutuon please pm me. And do you think flashing the system.img will solve booting probz?
suggestion
take a look at this url, and examine the zip file contained.
you could boot into cwm and install the zip (not suggesting, its what i did)
if u make a zip file in the same layout you could install your zip and it will update the system partition.
as you have a desire, heres whats required
on phone: place phone into fastboot mode
on computer: unzip to a folder , place the img file in such folder,
open a command prompt, (navigate to folder using the cd command)
and type: fastboot boot bravo-cwm.img
mount sd card, toggle usb storage, place your zip in root of sdcard.
then untoggle, go back, select option to install zip from sdcard.
choose select zip file.
find your zip.
tap on the file, and it will install...
you SHOULD by this point have an updated phone as you desired (lol)
if it does not work as you expected, have a look for a standard system.img for your phone, and put that into a zip
name the zip (i put it in caps, weather needed i dont know) PM99IMG.zip
place it into root of sdcard, and put phone into the first screen of recovery menu, the white screen.
it will analyze your zip and ask you to install, press up to flash and then the required option to reboot when its done to revert your phone back to normal.
hope this helps there buddy,
ill most likley forget to check back, so if u need any help pm me and ill see what i can do,
Is this working
Edu_Renesto said:
I got it. If you use Linux, you can create an iso file of the system folder, and then convert it to .img. Just follow it:
In a terminal(CTRL+ALT+T):
Code:
mkisofs -o /path/to/the/system/folder ~/system.iso
dd if=~/system.iso of=~/system.img
rm ~/system.iso
Your system.img will be on your home directory.
Click to expand...
Click to collapse
HI Bro,
Is the output file system.img after flash into the rom?
phone stuck in usb logo... i have zenfone 4
Yaffey for Windows Might Help
tejasjadhav said:
If you have Linux on your PC, then you can use the 'yaffs' tool. Search it on Google.
This is how even AOSP compiles system folder into system.img
Sent from my LG GT540 Swift using XDA App
Click to expand...
Click to collapse
And if you have Windows on your PC, try Yaffey! http://www.xda-developers.com/yaffey-for-all-your-yaffs2-needs/

Nexus 6p stuck on Google screen during boot due to replacing build.prop

I Replaced the build.prop on my rooted Google nexus 6p running Android 7.0 with the build.prop file from the pixel to run Google Assistant.The phone is now stuck on the Google logo during boot,PLEASE HELP.
Did you make a backup copy of the file before replacing it, are you rooted, and have TWRP installed?
If so, reboot to recovery, use TWRP Terminal function to copy the backup of the build.prop to the modified one.
dratsablive said:
Did you make a backup copy of the file before replacing it, are you rooted, and have TWRP installed?
If so, reboot to recovery, use TWRP Terminal function to copy the backup of the build.prop to the modified one.
Click to expand...
Click to collapse
I did not make a back up but I am rooted and have Twrp installed.What can i do from here?
If you can boot to bootloader you should be able to replace the file with a standard one.
Alden1227 said:
I Replaced the build.prop on my rooted Google nexus 6p running Android 7.0 with the build.prop file from the pixel to run Google Assistant.The phone is now stuck on the Google logo during boot,PLEASE HELP.
Click to expand...
Click to collapse
same here please help.....freaking out
1. The build.prop contains the settings for a specific build for a specific phone. You can't just replace it from another build, not to mention another phone. Well, I guess, you already know this.
2. You should know exactly which build you were on. Exactly. Then:
* What I would do, is download the factory image from https://developers.google.com/android/nexus/images#angler
o Extract it, extract the image-angler-...zip, and mount the system.img, find the build.prop and adb push it to the phone.
o Reboot
* But you can also ask somebody who has the exact build as you do, and ask for the build.prop. Then push it to the phone.
Either restore from backup or edit the buildprop (if possible) I guess.
You only needed to edit 2 lines in the buildprop though, why replace the whole thing?
Alden1227 said:
I did not make a back up but I am rooted and have Twrp installed.What can i do from here?
Click to expand...
Click to collapse
First thing's first. Since you didn't just edit your build.prop, but replaced it with another, try setting permissions.
Step 1: Boot to TWRP > Mount > Select "System"
Step 2: Advanced > File Manager
Step 3: Navigate to /system/build.prop
Step 4: Select "chmod" and type "644" (don't include quotation marks)
Reboot and see if it works. If the permissions weren't right and you didn't change them, you'd most likely be in a boot loop. If this doesn't work you can just flash your system.img again. It won't wipe your internal storage, data (installed apps, etc.) If you have custom host files for ad blocking, you may need to apply them again.
If that does not work;
I'm going to assume you were on stock Nougat. Download the factory image (same build you were on before) and unzip the file. You'll end up with a folder with another zip archive in it. Unzip that as well. Inside you'll find a file named "system.img"
Move that system.img file to your ADB/fastboot folder. Shift+Right Click that folder and select "Open command window here"
Hold volume down + power to boot into the bootloader. Connect the phone to the PC and in the command prompt, type "fastboot devices" (no quotes again. ) It should show your devices serial number. If it does, perfect. If not, check your ADB/fastboot installation.
Once you get fastboot to show your serial number all you need to do is type;
Code:
fastboot flash system system.img
That should do it. If you need any more help, just reply back.
Edit: @istperson, AFAIK, you cannot pick out files from a .img file like that. When I right click it on my system and choose mount it tells me the image file is corrupted. Tried downloading again and hashes match. Windows 10. I use 7zip as well, and that can't open it either. Is there another program to use or is something whacky on my end? Wouldn't doubt it. Just took a Win10 update yesterday and it's been acting up on me all day. :/
RoyJ said:
Edit: @istperson, AFAIK, you cannot pick out files from a .img file like that. When I right click it on my system and choose mount it tells me the image file is corrupted. Tried downloading again and hashes match. Windows 10. I use 7zip as well, and that can't open it either. Is there another program to use or is something whacky on my end? Wouldn't doubt it. Just took a Win10 update yesterday and it's been acting up on me all day. :/
Click to expand...
Click to collapse
It's a sparse image, you have to convert it to normal mage with simg2img. Then you can mount it normally.
istperson said:
It's a sparse image, you have to convert it to normal mage with simg2img. Then you can mount it normally.
Click to expand...
Click to collapse
Awesome, thanks!
Fixed the issue
frreak said:
same here please help.....freaking out
Click to expand...
Click to collapse
I got mine to work by flashing Android 7.0
same thing happened to me.... stuck on google even after flashing stock....
dadoc04 said:
same thing happened to me.... stuck on google even after flashing stock....
Click to expand...
Click to collapse
Flash stock boot, system and vendor img files.
Sent from my Pixel XL using XDA-Developers mobile app
Same thing happened to me at first (though I did not use the build prop from a Pixel). I just dirty flashed my ROM (Octo N) and it then got passed the Google screen and loaded with no problem. I updated my build prop manually in order to get Google Assistant to work, and it's been working great ever since.
RoyJ said:
First thing's first. Since you didn't just edit your build.prop, but replaced it with another, try setting permissions.
Step 1: Boot to TWRP > Mount > Select "System"
Step 2: Advanced > File Manager
Step 3: Navigate to /system/build.prop
Step 4: Select "chmod" and type "644" (don't include quotation marks)
Reboot and see if it works. If the permissions weren't right and you didn't change them, you'd most likely be in a boot loop. If this doesn't work you can just flash your system.img again. It won't wipe your internal storage, data (installed apps, etc.) If you have custom host files for ad blocking, you may need to apply them again.
If that does not work;
I'm going to assume you were on stock Nougat. Download the factory image (same build you were on before) and unzip the file. You'll end up with a folder with another zip archive in it. Unzip that as well. Inside you'll find a file named "system.img"
Move that system.img file to your ADB/fastboot folder. Shift+Right Click that folder and select "Open command window here"
Hold volume down + power to boot into the bootloader. Connect the phone to the PC and in the command prompt, type "fastboot devices" (no quotes again. ) It should show your devices serial number. If it does, perfect. If not, check your ADB/fastboot installation.
Once you get fastboot to show your serial number all you need to do is type;
That should do it. If you need any more help, just reply back.
Edit: @istperson, AFAIK, you cannot pick out files from a .img file like that. When I right click it on my system and choose mount it tells me the image file is corrupted. Tried downloading again and hashes match. Windows 10. I use 7zip as well, and that can't open it either. Is there another program to use or is something whacky on my end? Wouldn't doubt it. Just took a Win10 update yesterday and it's been acting up on me all day. :/
Click to expand...
Click to collapse
Chmod 755 worked too

[GUIDE] [MAGISK] Root stock Oreo B520 B521 B562

DISCLAIMER: I will not be responsible of any issues you could face following this how-to. You do it at your own risk!​
Here is a guide to root Honor 8 B521 Oreo. I did this on FRD-L09C432B521. Even if i think the "easy method" should work with other iteration of the phone (L02, L19, ...), I am not sure ramdisk is the same for all so test it if you feel lucky and please report if it works or not.
Requirements:
- Honor 8 running Oreo
- Unlocked Bootloader
- adb and fastboot installed on your computer (https://forum.xda-developers.com/android/software-hacking/alpha-adb-fastboot-installer-windows-t3637255 (Hit the thanks button)
Long method: (should work for all honor 8)​
1 -- Visit http://pro-teammt.ru/firmware-database/ and search your exact build (FRD-L09C432B521 for me). If you have several phones listed for your build, click the name of the build on the left. This will open an xml file on the first line of which you will see the exact model it is for.
2 -- Once you know which firmware is yours, click on "filelist". This will list the files for this build and theirs url. Copy the link pointing to "update.zip" (http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3109/g1699/v159456/f1/full/update.zip for me). Decompress it wherever you want.
3 -- Download and run Huawei Update Extractor (Hit the thanks button) . Untick "verify header checksum" in "settings" tab.
4 -- In the "extract" tab, click on "..." and select "update.app" in the previously "update.zip" decompressed folder.
5 -- Files from "update.app" should now be listed. Find "ramdisk" and right click on it. Choose "extract" and you will be able to save the file wherever you want. Copy this file on your phone.
6 -- On your phone: Go to Magisk thread (Hit the thanks button) and download the latest magisk manager. Install it. Grant permission to the manager to access your storage in phone settings > applications.
7 -- Run Magisk Manager, it will ask you if you want to install the zip. Select "Yes". It will now ask if you want to flash the zip or to patch a boot image, choose this last one. Point to the ramdisk img you previously copied on your phone. Magisk manager will now patch it and create a new "patched_boot.img" file. Copy this on your computer.
8 -- On your computer: Open a command prompt where you copied "patched_boot.img". Enter the following commands:
adb reboot bootloader (your phone will reboot in bootloader mode)
fastboot flash ramdisk patched_boot.img
fastboot reboot
9 -- Your phone will now reboot and be rooted. To unroot, repeat the process (8) with your stock ramdisk (the one extracted with Huawei Update Extractor)
Easy method​
If your build is FRD-L09C432B521, FRD-L02C432B521, FRD-L04C567B520 or FRD-L09C432B562, you can use these already patched ramdisk.img.
patched_RAMDISKL09B521.img
stock_RAMDISKL09B521.img
patched_RAMDISKL02B521.img thanks to @Sharath007for the file
patched_RAMDISKL04B520.img thanks to @macbuggo for the file
stock_RAMDISKL04B520.img thanks to @macbuggo for the file
patched_RAMDISKL09B562.img thanks to @topscorer for the file
stock_RAMDISKL09B562.img thanks to @topscorer for the file
On your computer: Open a command prompt where you downloaded "patched_RAMDISKL09B521.img" (or L02/L04 ramdisk) .
Enter the following commands:
adb reboot bootloader (your phone will reboot in bootloader mode)
fastboot flash ramdisk patched_RAMDISKLXXBXXX.img (the exact name depends of the ramdisk you downloaded)
fastboot reboot
Your phone will now reboot
Go to Magisk thread (Hit the thanks button) and download the latest magisk manager. Install it.
You now got root. To unroot, repeat the process with stock ramdisk.
Worked in the first attempt.. Safety net passes..
Sharath007 said:
Worked in the first attempt.. Safety net passes..
Click to expand...
Click to collapse
Did you do this on L09? Otherwise, could you share the patched ramdisk so I can add it in OP?
stephtban said:
Did you do this on L09? Otherwise, could you share the patched ramdisk so I can add it in OP?
Click to expand...
Click to collapse
Thanks for your guide. I did it on my FRD-L02 Variant.
FRD_L02_patched_boot
Sharath007 said:
Thanks for your guide. I did it on my FRD-L02 Variant.
FRD_L02_patched_boot
Click to expand...
Click to collapse
Thanks! I added your ramdisk to OP. Do you still have unpatched version of it for easy unrooting?
delete
PremiumBlaze said:
Can't guys flash Magisk using twrp? It worked for me in android oreo.
Click to expand...
Click to collapse
You can indeed use twrp but as it is not completely functional yet, some people don't use it. Besides, Open Kirin suggest to flash their rom with fastboot so it limits the interest of having twrp.
stephtban said:
DISCLAIMER: I will not be responsible of any issues you could face following this how-to. You do it at your own risk!​
Here is a guide to root Honor 8 B521 Oreo. I did this on FRD-L09C432B521. Even if i think the "easy method" should work with other iteration of the phone (L02, L19, ...), I am not sure ramdisk is the same for all so test it if you feel lucky and please report if it works or not.
Requirements:
- Honor 8 running Oreo
- Unlocked Bootloader
- adb and fastboot installed on your computer (https://forum.xda-developers.com/android/software-hacking/alpha-adb-fastboot-installer-windows-t3637255 (Hit the thanks button)
Long method: (should work for all honor 8)​
1 -- Visit http://pro-teammt.ru/firmware-database/ and search your exact build (FRD-L09C432B521 for me). If you have several phones listed for your build, click the name of the build on the left. This will open an xml file on the first line of which you will see the exact model it is for.
2 -- Once you know which firmware is yours, click on "filelist". This will list the files for this build and theirs url. Copy the link pointing to "update.zip" (http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3109/g1699/v159456/f1/full/update.zip for me). Decompress it wherever you want.
3 -- Download and run Huawei Update Extractor (Hit the thanks button) . Untick "verify header checksum" in "settings" tab.
4 -- In the "extract" tab, click on "..." and select "update.app" in the previously "update.zip" decompressed folder.
5 -- Files from "update.app" should now be listed. Find "ramdisk" and right click on it. Choose "extract" and you will be able to save the file wherever you want. Copy this file on your phone.
6 -- On your phone: Go to Magisk thread (Hit the thanks button) and download the latest magisk manager. Install it. Grant permission to the manager to access your storage in phone settings > applications.
7 -- Run Magisk Manager, it will ask you if you want to install the zip. Select "Yes". It will now ask if you want to flash the zip or to patch a boot image, choose this last one. Point to the ramdisk img you previously copied on your phone. Magisk manager will now patch it and create a new "patched_boot.img" file. Copy this on your computer.
8 -- On your computer: Open a command prompt where you copied "patched_boot.img". Enter the following commands:
adb reboot bootloader (your phone will reboot in bootloader mode)
fastboot flash ramdisk patched_boot.img
fastboot reboot
9 -- Your phone will now reboot and be rooted. To unroot, repeat the process (8) with your stock ramdisk (the one extracted with Huawei Update Extractor)
Easy method​
If your build is FRD-L09C432B521 or FRD-L02C432B521, you can use these already patched ramdisk.img.
patched_RAMDISKL09B521.img
stock_RAMDISKL09B521.img
patched_RAMDISKL02B521.img thanks to @Sharath007for the file
On your computer: Open a command prompt where you downloaded "patched_RAMDISKL09B521.img" (or L02 ramdisk) .
Enter the following commands:
adb reboot bootloader (your phone will reboot in bootloader mode)
fastboot flash ramdisk patched_RAMDISKL09B521.img OR fastboot flash ramdisk patched_RAMDISKL02B521.img
fastboot reboot
Your phone will now reboot and be rooted
To unroot, repeat the process with stock ramdisk.
Click to expand...
Click to collapse
Thanks! work perfectly
freewind29 said:
Thanks! work perfectly
Click to expand...
Click to collapse
Don't quote entire op please.
Did not work on my phone (L09C432) with the "easy way".
Flashed patched ramdisk, no root, but at least still running.
daFlox said:
Did not work on my phone (L09C432) with the "easy way".
Flashed patched ramdisk, no root, but at least still running.
Click to expand...
Click to collapse
Sorry, I forgot a step. After you flashed the patched ramdisk, go to Magisk thread (Hit the thanks button) and download the latest magisk manager. Install it. This should work then. Please tell me if it helped.
OP edited with this new step.
Worked great here for FRD-04, one thing to add
You may have to restart your phone to be able to see the patched file via MTP in order to copy it to your PC.
macbuggo said:
Worked great here for FRD-04, one thing to add
You may have to restart your phone to be able to see the patched file via MTP in order to copy it to your PC.
Click to expand...
Click to collapse
Happy this works. Could you share the stock ramdisk and the patched ramdisk so I can add it in OP.
stephtban said:
Sorry, I forgot a step. After you flashed the patched ramdisk, go to Magisk thread (Hit the thanks button) and download the latest magisk manager. Install it. This should work then. Please tell me if it helped.
OP edited with this new step.
Click to expand...
Click to collapse
Ahhh, okay!
Will try it this evening and report tomorrow.
daFlox said:
Will try it this evening and report tomorrow.
Click to expand...
Click to collapse
Works, thanks a lot!! (additional thanks in the original post )
stephtban said:
Happy this works. Could you share the stock ramdisk and the patched ramdisk so I can add it in OP.
Click to expand...
Click to collapse
I couldn't upload to XDA directly due to 8MB limit unfortunately, here it is if you want to put it up on your google drive or something
http://s000.tinyupload.com/index.php?file_id=10562650897614852938
This is a patched image of FRD-04C567 8.0.0.520 with Magisk 17.1
macbuggo said:
I couldn't upload to XDA directly due to 8MB limit unfortunately, here it is if you want to put it up on your google drive or something
http://s000.tinyupload.com/index.php?file_id=10562650897614852938
This is a patched image of FRD-04C567 8.0.0.520 with Magisk 17.1
Click to expand...
Click to collapse
Thanks. File and credit added to OP. Do you still have stock ramdisk for easy unrooting?
Tinyupload appears to be down, these links will last for 30 days
FRD-L04C567 8.0.0.520 ramdisk patched Magisk 17.1
https://ufile.io/nsa1h
Stock L04 520 ramdisk
https://ufile.io/34eq5
macbuggo said:
Tinyupload appears to be down, these links will last for 30 days
FRD-L04C567 8.0.0.520 ramdisk patched Magisk 17.1
https://ufile.io/nsa1h
Stock L04 520 ramdisk
https://ufile.io/34eq5
Click to expand...
Click to collapse
File added. Thx.
Hallo! Is it possible to root my FRD-L09 Honor 8 Oreo this way too? And after then can I flash/install a Stock Version with Emui 5 Android 7 Nougat and then un-root again? I need my device unrooted, because of SkyGo App (Germany) doesnt work with rootet Devices ...
If theres another way to downgrade without these operations, please let me know and maybe show me the steps for that?! Thank you so much!

Searching TWRP for the SM-A515F

Hi,
I would like install at the Samsung SM-A515F the Lineage OS and the TWRP. I found only TWRP for the SM-A50. And the flashing dose not work for this phone.
I has try it with Heimdall and Odin.
The recovery I had downloaed from this Page:
https://www.droidthunder.com/install-twrp-recovery-on-galaxy-a51/
Need help or better information, if there exist an TWRP and lineage for this device.
Regards tiptel170
No need to flash twrp,u can flash aosp rom or even gsi with the help of odin only.Go to s10 page
sankhauaa said:
No need to flash twrp,u can flash aosp rom or even gsi with the help of odin only.Go to s10 page
Click to expand...
Click to collapse
s 10 page? which one is that? can u please provide the link?
Go here for odin flash method without twrp
sankhauaa said:
No need to flash twrp,u can flash aosp rom or even gsi with the help of odin only.Go to s10 page
Click to expand...
Click to collapse
sankhauaa said:
Go here for odin flash method without twrp
Click to expand...
Click to collapse
so does this method work for lineage os on A515F too?
After the long searching in the web, I found this:
A515F-TWRP
Link: https://firmware.gem-flash.com
After paying, you can download this TRWP. No idea, if this works. Maybe some one, will be use it.
ibtsam3301 said:
so does this method work for lineage os on A515F too?
Click to expand...
Click to collapse
I m not tried. But someone in this a51 group tried.Its working. But not so easy .
---------- Post added at 09:11 AM ---------- Previous post was at 09:09 AM ----------
tiptel170 said:
After the long searching in the web, I found this:
A515F-TWRP
Link: https://firmware.gem-flash.com
After paying, you can download this TRWP. No idea, if this works. Maybe some one, will be use it.
Click to expand...
Click to collapse
Don't pay.Its fake
tiptel170 said:
After the long searching in the web, I found this:
A515F-TWRP
Link: https://firmware.gem-flash.com
After paying, you can download this TRWP. No idea, if this works. Maybe some one, will be use it.
Click to expand...
Click to collapse
of course it would be fake
How can I open the img-files in the Linux desktop?
Found here this link, for the Magisk in the A515F:
https://forum.xda-developers.com/ga...w-to-root-samsung-a51-sm-a515f-t4032389/page2
I'll found this:
1. https://www.androlite.com/2020/01/twrp-root-samsung-galaxy-a51.html
2. https://appslova.com/install-twrp-on-samsung-galaxy-a51/
This links look likes good, because, my phone will not start or the heimdall goes into the error (likes in de page one, the screenshots ).
I found this, and I used basic from this page: https://forum.xda-developers.com/showpost.php?p=82241115&postcount=70
My first steps to install the lineage os 17 on the SM-A515F
Lineage: https://sourceforge.net/projects/andyyan-gsi/
All commands in the linux terminal, the path please use your own paths you like it!
Unpack lineage****.xz:
unxz lineage*.xz
1) Extract the AP_file.tar.md5 from your firmware.zip file using 7zip
2) Extract the super.img.lz4 file from the AP_file.tar.md5 file using 7zip
3) Put super.img.lz4 file in LZ4 folder and run in CMD the command
lz4 -d super.img.lz4 superLZ4.img
4) Put superLZ4.img file in Simg2img folder and run in CMD the command
chmod 777 ~/bin/otatools/bin/simg2img
~/bin/otatools/bin/simg2img superLZ4.img superSIMG.img
In Linux OR Bash shell:
1) Put superSIMG.img in otatools/bin folder and extract it in Linux terminal using the command
chomd 777 ~/bin/otatools/bin/lpunpack
~/bin/otatools/bin/lpunpack --slot=0 superSIMG.img ~/1
2) Put, in the folder where you extracted superSIMG.img, the GSI file you downloaded and rename it to system.img. Now you should have odm.img, system.img, vendor.img and product.img files in the same folder.
You may also need to delete/remane the original system.img file before renaming the GSI file.
3) Now you’re going to make a brand new super.img file containing all 4 files of the previous step. This is a critical and tricky step. Run Linux terminal and type:
chomd 777 ~/bin/otatools/bin/lpmake
~/bin/otatools/bin/lpmake ~/bin/otatools/bin/lpmake --metadata-size 65536 --super-name super --metadata-slots 2 --device super:4294967296 --group main:4293513600 --partition system:readonly:1959841792:main --image system=./system.img --partition vendor:readonly:680239104:main --image vendor=./vendor.img --partition odm:readonly:4349952:main --image odm=./odm.img --sparse --output ./super.img
4) Make an tar file:
tar -H ustar -c super.img > lineageos17.1_SMA515F.tar
5) Goto Windows -> Odin -> AP, put the file lineageos17.1_SMA515F.tar in to the AP-slot -> Start
This is what I has done:
But, by the compiling, I got this error:
Code:
lpmake I 07-15 20:18:20 92568 92568 builder.cpp:1012] [liblp]Partition system will resize from 0 bytes to 1959841792 bytes
lpmake I 07-15 20:18:20 92568 92568 builder.cpp:1012] [liblp]Partition vendor will resize from 0 bytes to 680239104 bytes
lpmake I 07-15 20:18:20 92568 92568 builder.cpp:1012] [liblp]Partition odm will resize from 0 bytes to 4349952 bytes
Invalid sparse file format at header magic
Invalid sparse file format at header magic
And the phone is into the boot-loop, it will not starting the system.
Any help please...
Update:
System requirements:
- Fedora 32 with current kernel
- VirtualBox 6.1 with USB support
- Windows 7
- ODIN 3.14
Enable Root:
I) On mobile phone
1. carry out firmware update
1.1 Set up device, WITHOUT Google Accounts, WITHOUT security settings, set up WLAN only
1.2 Settings -> Phone info -> Software information -> Build number (press 7x )
1.3 Settings -> developer option -> enable OEM unlocking and USB debugging
2. copy the files from the root directory to the external SD card
2.1 Install MagiskManager
2.2 Starting MagiskManager
2.3 Installing Magisk Select
II) In the Fedora area
3. unpack the boot.img from the AP***.tar, on the PC
3.1 lz4 -d boot.img.lz4 boot.img
3.2 Copy the boot.img to the SD card from the phone
4. patching the boot.img in MagikMager
4.1 Select the boot.img, wait until "Done" appears.
4.2 Then copy the magisk_patch.img to the workstation (Fedora)
5.1 Rename the original boot.img to boot_original.img
5.2 renaming magisk_patch.img to boot.img
5.3 Transfer the new boot.img to the PC for the ODIN or HEIMDALL
5.4 Convert the boot.img to boot.tar: tar -H ustar -c boot.img > boot.tar (here for ODIN)
III) Virtual environment Win7
6.1 Copy the boot.tar from the Fedora workstation to the Odin directory of Win7
6.2 Open the boot.tar in the AP slot, Auto Reboot must be off
6.3 Press Vol + & Vol - simultaneously and plug in the USB cable (On SM-A515F), then click on "Start" in the ODIN.
IV) On the Mobile Phone
7.1 If ready, restart with Vol - & Hold PWR for more than 7 sec
7.2 Putting the device into recovery mode (switch off, press vol up and pwr simultaneously, Samsunglog appears, release pwr again)
7.3 Wipe your data: Wiped data/factury reset
Note: Device makes a boot loop for the first time - is normal. The first start takes quite long, be patient!
7.4 Settings -> Phone info -> Software information -> Build number (press 7x )
7.5 Settings -> Developer option -> Enable OEM unlock, USB debugging and system auto update to OFF
7.6 Installing and starting MagiskManger
The device will restart once!
Check it: Whether root is present
Fedora workstation:
Call Terminal, enter adb shell followed by su
If everything went well, the MagiskManager should answer the phone and ask for authorization.
These steps works well with the firmware: SM-A515F R58N60BLPAZ
Where are the exactly steps for installing the TWRP?
I has installed the TWRP-10.0(A51).zip with the heimdall and the phone will not booting. And I'm not entering the TWRP. And finally I has reinstalled the revcovery.img (heimdall) from the APxxxx.zip file, and the phone starting normally.
All things with the AOSP10 etc, I has tried and the other steps for an alternative system will not work on this phone.
Thanks God, the root is now working. And I have to work with the ugly Samsung system.
tiptel170 said:
Update:
System requirements:
- Fedora 32 with current kernel
- VirtualBox 6.1 with USB support
- Windows 7
- ODIN 3.14
Enable Root:
I) On mobile phone
1. carry out firmware update
1.1 Set up device, WITHOUT Google Accounts, WITHOUT security settings, set up WLAN only
1.2 Settings -> Phone info -> Software information -> Build number (press 7x )
1.3 Settings -> developer option -> enable OEM unlocking and USB debugging
2. copy the files from the root directory to the external SD card
2.1 Install MagiskManager
2.2 Starting MagiskManager
2.3 Installing Magisk Select
II) In the Fedora area
3. unpack the boot.img from the AP***.tar, on the PC
3.1 lz4 -d boot.img.lz4 boot.img
3.2 Copy the boot.img to the SD card from the phone
4. patching the boot.img in MagikMager
4.1 Select the boot.img, wait until "Done" appears.
4.2 Then copy the magisk_patch.img to the workstation (Fedora)
5.1 Rename the original boot.img to boot_original.img
5.2 renaming magisk_patch.img to boot.img
5.3 Transfer the new boot.img to the PC for the ODIN or HEIMDALL
5.4 Convert the boot.img to boot.tar: tar -H ustar -c boot.img > boot.tar (here for ODIN)
III) Virtual environment Win7
6.1 Copy the boot.tar from the Fedora workstation to the Odin directory of Win7
6.2 Open the boot.tar in the AP slot, Auto Reboot must be off
6.3 Press Vol + & Vol - simultaneously and plug in the USB cable (On SM-A515F), then click on "Start" in the ODIN.
IV) On the Mobile Phone
7.1 If ready, restart with Vol - & Hold PWR for more than 7 sec
7.2 Putting the device into recovery mode (switch off, press vol up and pwr simultaneously, Samsunglog appears, release pwr again)
7.3 Wipe your data: Wiped data/factury reset
Note: Device makes a boot loop for the first time - is normal. The first start takes quite long, be patient!
7.4 Settings -> Phone info -> Software information -> Build number (press 7x )
7.5 Settings -> Developer option -> Enable OEM unlock, USB debugging and system auto update to OFF
7.6 Installing and starting MagiskManger
The device will restart once!
Check it: Whether root is present
Fedora workstation:
Call Terminal, enter adb shell followed by su
If everything went well, the MagiskManager should answer the phone and ask for authorization.
These steps works well with the firmware: SM-A515F R58N60BLPAZ
Where are the exactly steps for installing the TWRP?
I has installed the TWRP-10.0(A51).zip with the heimdall and the phone will not booting. And I'm not entering the TWRP. And finally I has reinstalled the revcovery.img (heimdall) from the APxxxx.zip file, and the phone starting normally.
All things with the AOSP10 etc, I has tried and the other steps for an alternative system will not work on this phone.
Thanks God, the root is now working. And I have to work with the ugly Samsung system.
Click to expand...
Click to collapse
It is work ???
GreggBorowski said:
It is work ???
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------
These steps works well with the firmware: SM-A515F R58N60BLPAZ
Where are the exactly steps for installing the TWRP?
I has installed the TWRP-10.0(A51).zip with the heimdall and the phone will not booting. And I'm not entering the TWRP. And finally I has reinstalled the revcovery.img (heimdall) from the APxxxx.zip file, and the phone starting normally.
All things with the AOSP10 etc, I has tried and the other steps for an alternative system will not work on this phone.
Thanks God, the root is now working. And I have to work with the ugly Samsung system.
sankhauaa said:
I m not tried. But someone in this a51 group tried.Its working. But not so easy .
---------- Post added at 09:11 AM ---------- Previous post was at 09:09 AM ----------
Don't pay.Its fake
Click to expand...
Click to collapse
sar please send me a51 group
Mehran` said:
sar please send me a51 group
Click to expand...
Click to collapse
Go to s10 page
sankhauaa said:
Go here for odin flash method without twrp
Click to expand...
Click to collapse
Not working. I has done step by step in this guide.
ibtsam3301 said:
so does this method work for lineage os on A515F too?
Click to expand...
Click to collapse
No. Withe manipulation from the vbmeta.img, the system is unwilling to start. It gos in to the bootloader, with error-codes. Like in first thread I describe. Olny the SAMSUNG original system works with the kernel modification for the MagiskManager.
I saw black for the future, there will be exist an custom rom for this device.
I have no idea, what can I do for this device. But I use and spend a lot of time for modification, without an good result. Has anyone an idea what can I do? But it look likes, it has an great secure system intern for not using an customer rom. This is my intention.

OneUI 4 Beta Update Link - India (Beta 2 Update is live - Dec Security Patch)

Hello Everyone. The update is gradually getting live in all the regions. I just got it in India. Below is the link which I captured via Canary app.
Beta 1:
http://fota-secure-dn.ospserver.net/firmware/INS/SM-N986B/nspx/3d15912c7dec47678d26b7f03f722ebe.bin?px-time=61da7eb1&px-hash=d04c3cb435cad6937673908c12244c90&px-wid=6204308-WSA211110062027&px-wctime=2021-11-10%2006:20:27&px-unum=&px-nb=UGtezEZ854jbmFcvWGxLEA==
Beta 1 Mirror: https://klisza1993.synology.me:1000.../J4ukGm08evreR1dYWbOQxngvuPTbTvJh-qb4gj3eTDgk
Beta 1 Mirror:
Note 20 Ultra One UI 4 Beta - Google Drive
drive.google.com
Checksum to verify corrupt downloads:
MD5 : 54db93183aa24ecdfaa7134891022094
Beta 2 Update: http://fota-secure-dn.ospserver.net/firmware/INS/SM-N986B/nspx/698c78dfebf8472d9e1691413b9af2f2.bin?px-time=61ed489c&px-hash=5f86741823355625dacb429abc4ff6cf&px-wid=3281729-WSA211124122250&px-wctime=2021-11-24 12:22:50&px-unum=&px-nb=UGtezEZ854jbmFcvWGxLEA==
Prerequisite to flash beta on N20U (N986B) thanks to
dr.ketan​
You need to be on November Security patch before moving ahead.
Dial *#1234#
If your info is ditto same as said below then only you can flash beta 1 for N986B
AP : N986BXXS3DUJ6
CSC : N986BOXM3DUH5
CP : N986BXXS3DUIF
Also if your device is rooted/modified, it will fail. (unlocked bootloader isn't issue but firmware must be complete stock)
TLDR instructions, thanks to pernodpepper
0. Create backup of your device (SmartSwitch)
1. Download .bin
2. Rename update.zip
3. Place file on SDCard
4. Go to recovery (No odin/download mode required)
5. Select Apply update from SDCard and choose update.zip
6. Profit
Detailed instructions along with multiple methods to install. Thanks to Evil_Smiley_za and @AhmedMomen
UPDATE:
-This thread will be for sharing tips and help and update.zip/.bin files (when/if available) for the OneUI 4.0 Android 12 Beta for the Galaxy Note 20 series (Unlocked/Exynos)
Installation Methods:
ADB-method:
1. Download SDK platform tools https://developer.android.com/studio/releases/platform-tools
2. Extract the file in your desktop.
3. Inside the extracted folder put the update.zip file
4. Inside this folder, holding left shift, right click the mouse and select "open command prompt here". The command prompt will open.
5. Shutdown your phone and connect it to the pc
6. Holding Power and volume+ and enter into recovery mode.
7. Select "update via ADB". (scroll down using the volume buttons and select using the power button).
8. Connect the phone to a PC using an original samsung USB cable.
9. In the command prompt run the following command:
./adb devices
10. Wait to see that the daemon has started and that your device is found.
11. If you device is found, run the following command:
./adb sideload update.zip
SD-card method:
1. Download the bin file and rename it to update.zip (by going to file options on your pc you can select to view the file extensions. This makes the renaming process much easier and safer, and avoids renaming the file to update.zip.zip)
2. Copy it to the root directory of your SDcard.
3. Shut down your phone.
4. Connect any USB device to your device, AKG earphones could work, then press Power and volume+ buttons to get into recovery mode.
5. Using your volume keys navigate to "update via sdcard" and press power button to select it.
6. Again using volume keys navigate to the file "update.zip" and press power button to select it.
7. Update will start. Leave it till it completes installing. It will take some time.
8. Phone will reboot by itself and load android.
The update process will start. You will see a percentage counting. First it will verify, then patch etc. Do not move the cable, disconnect the phone or power off the PC.
Once the process is completed (it takes some time) the phone will boot itself, update the apps and log into your home screen.
There are two methods that you can use to get into recovery mode
Method 1:
1. Connect your phone to your PC (Make sure USB debugging is on).
2. Using ADB, enter the command ./adb reboot recovery
3. Wait a little and you should be in recovery mode.
Method 2:
1. Power off your device
2. Connect your device to a PC or use the AKG earphones.
3. Hold down Power+VolumeUp buttons and keep pressing them until you enter recovery mode.
This will not trip knox if done by the methods above
Don't install a beta unless you are fully aware what you are going into.
Don't install the beta if you want your phone to be stable, IT'S a BETA.
It's recommended to make a backup of your data before updating to the Android 12 Beta.
Important Notes:
-Rename the .bin file to update.zip in order to be able to flash it from recovery.
-A common mistake done by some people is that they see the file named update while its a WinRAR.zip file already, then they add another .zip making the name of the file update.zip.zip which will not be flashed successfully, So make sure you do it right.
-Updating to the beta is AT YOUR RISK, No one is responsible if anything goes wrong.
You will not receive OTAs again UNTIL you are on a firmware that gets released later for your original CSC, thats most likely not happening before the BETA is over.
Note: AngryPixel89 is my reddit alias.
is it OXM?
antisocialbratt said:
Hello Everyone. The update is gradually getting live in all the regions. I just got it in India. Below is the link which I captured via Canary app. its a 2.5gb update. Use it at your own risk and please ask other senior members if you have doubts. I just followed instructions someone else shared to grab that link for you guys.
http://fota-secure-dn.ospserver.net/firmware/INS/SM-N986B/nspx/3d15912c7dec47678d26b7f03f722ebe.bin?px-time=61da7eb1&px-hash=d04c3cb435cad6937673908c12244c90&px-wid=6204308-WSA211110062027&px-wctime=2021-11-10%2006:20:27&px-unum=&px-nb=UGtezEZ854jbmFcvWGxLEA==
OXM
Click to expand...
Click to collapse
Yes. It is INS OXM
antisocialbratt said:
Yes. It is INS OXM
Click to expand...
Click to collapse
Awesome
Can someone share the installation process please
Most probably you will have to flash it using Odin but I wouldn't guarantee that. Wait for some time till some modders here figure out a way.
waseem.gani said:
Can someone share the installation process please
Click to expand...
Click to collapse
First make sure you are on November patch
0. Create backup of your device (SmartSwitch)
1. Download .bin
2. Rename update.zip
3. Place file on SDCard
4. Go to recovery (No odin/download mode required)
5. Select Apply update from SDCard and choose update.zip
6. Profit
Maybe this help
Just rename it to update.zip and intall from recovery mode (i was in the latest build with november security patch)
works fine, thank you for the upload.
Do you have to be on October patch (DUIF) or November patch (DUJ6)?
Inxteros said:
Do you have to be on October patch (DUIF) or November patch (DUJ6)?
Click to expand...
Click to collapse
November
Does reguset full wipe or is not needed ?
My bad I was not able to flash it via recovery,any help would be appreciated. I am on October patch.
pernodpepper said:
0. Create backup of your device (SmartSwitch)
1. Download .bin
2. Rename update.zip
3. Place file in internal storage
4. Go to recovery (No odin/download mode required)
5. Flash update.zip
6. Profit
Click to expand...
Click to collapse
I can't see internl storge in the recovery
B.Gaboo said:
(i was in the latest build with november security patch)
You was on DUJ6/DUH5/DUIF?
Click to expand...
Click to collapse
N986BXXS3DUJ6
and installed from the external storage
waseem.gani said:
I can't see internl storge in the recovery
Click to expand...
Click to collapse
You need to use an sdcard and place the zip there
By any chance do you have Update.zip file for SM-G986B??
Rapier said:
You need to use an sdcard and place the zip there
Click to expand...
Click to collapse
Tried that as well, but don't know what the issue is
Amittey said:
By any chance do you have Update.zip file for SM-G986B??
Click to expand...
Click to collapse
This tread is for the SM-N986B. The note 20 Ultra only....

Categories

Resources