Database Users

6.0 Rolling Out For Canadian [Wind] XT1527!

Just got the notification now. Anybody interested? If so, a quick link, or a step by step on what's needed to pull this in for distro to all!?!? I have not dl'd yet, as I'm sure that's the first section to start with! :fingers-crossed:

I insteresa this update but unfortunately I have no knowledge to make a master eso.Espero help us forgiveness for my English so bad

I would like to try but my computer its broken

DSchwarz47 said:
I would like to try but my computer its broken
Click to expand...
Click to collapse
You would like to try what? What I was stating was my Moto E has an update available to 6.0 MM. I have not downloaded it as of yet, cause I am aware there's something you need to do first in order to capture the download for redistribution. From what I understand you cannot use an already downloaded and installed OEM~OTA update for redistribution...
A little guidance from the seniors would be EXTREMELY appreciated, as this is my first thread ever... I'm looking at you squid2 lolz

i am waiting for the 7th when Telus said they would roll it out.
Not sure how they make the uploaded Firmware archives either..
No matter how many time i asked i either got ignored or hammered with some weird advice (English issue?)
And i meant the one that we all use uploaded to Mega etc.
Who is making them and with what?
Apparently no one knows and what concerns me even more is a little thing called security.
I asked so uhhh why are we not using hashes to verify the firmware ?
It's complete insanity to check hashes on some dumb app and not your OS ..that just blows me away LOL

I'm interested in putting this on my Sprint phone (XT1526). CM13 won't detect my Canadian SIM.

24.51.39.en.CA
That's the fsent. Will upload in a few hrs.
Does anyone know if I'll be able /aloud to post a AFH link here on this thread I started?

Marshmallow v6.0 24.65.39 Telus XT1527 downloading now..
someone already ripped it into a standard package.
So OP you are in luck someone did the work for you :good:
I am downloading this one but there is one for Rogers too..
XT1527_SURNIA_RETCA-TELUS_6.0_MPI24.65-39_cid14_subsidy-TELUS_CFC.xml.zip
http://www.filefactory.com/file/10v...0_MPI24.65-39_cid14_subsidy-TELUS_CFC.xml.zip
Source + Rogers version etc:
http://www.filefactory.com/folder/752fdb49361c7f62/?sort=filename&order=ASC&show=100&page=2

lenigma1too said:
24.51.39.en.CA
That's the fsent. Will upload in a few hrs.
Does anyone know if I'll be able /aloud to post a AFH link here on this thread I started?
Click to expand...
Click to collapse
You were right
BUILD REQUEST INFO:
SW Version: surnia_retca-user 6.0 MPI24.65-39 25 release-keysM8916_2020629.41.03.21.51R
MBM Version: 80.20
Modem Version: M8916_2020629.41.03.21.51R
FSG Version: FSG-8916-02.61
Build Fingerprint: motorola/surnia_retca/surnia_umts:6.0/MPI24.65-39/25:user/release-keys
VERSION INFO FOUND UNDER 'ABOUT PHONE' SCREEN:
System Version: 24.51.39.surnia_retca.retca.en.CA
Model number: Moto E
Android Version: 6.0
Baseband Version: M8916_2020629.41.03.21.51R
Build Number: MPI24.65-39
Build Date: Thu Jan 28 14:25:13 CST 2016
OTHER MISC VERSION INFO:
Subsidy Lock Config: slcf_rev_b_telus_v1.1.nvm
Blur Version: Blur_Version.24.51.39.surnia_retca.retca.en.CA
Version when read from CPV: surnia_retca-user 6.0 MPI24.65-39 25 release-keys

I tried installing the Rogers firmware but stuck on boot animation. Help?
EDIT: I think I fixed it. Installed squid kernel r16.

xpmule said:
You were right
BUILD REQUEST INFO:
SW Version: surnia_retca-user 6.0 MPI24.65-39 25 release-keysM8916_2020629.41.03.21.51R
MBM Version: 80.20
Modem Version: M8916_2020629.41.03.21.51R
FSG Version: FSG-8916-02.61
Build Fingerprint: motorola/surnia_retca/surnia_umts:6.0/MPI24.65-39/25:user/release-keys
VERSION INFO FOUND UNDER 'ABOUT PHONE' SCREEN:
System Version: 24.51.39.surnia_retca.retca.en.CA
Model number: Moto E
Android Version: 6.0
Baseband Version: M8916_2020629.41.03.21.51R
Build Number: MPI24.65-39
Build Date: Thu Jan 28 14:25:13 CST 2016
OTHER MISC VERSION INFO:
Subsidy Lock Config: slcf_rev_b_telus_v1.1.nvm
Blur Version: Blur_Version.24.51.39.surnia_retca.retca.en.CA
Version when read from CPV: surnia_retca-user 6.0 MPI24.65-39 25 release-keys
Click to expand...
Click to collapse
Could you please lend a fellow Ontarian brother a hand, and tell me where the OTA file actually is? I've had the damn thing for a week now, and I can't seem to find it anywhere to capture it! I would love to actually install this OTA...
I do appreciate your help in finding somebody who had done the work already. However the OTA that I have waiting on this phone is a slightly different one. the numbers are different 24.51.39.... my educated guess is going to be it is slightly smaller because it contains no Rogers or Telus bloatware. Wind Mobile does not have a single app installed on this phone right outta the box, So I would like to capture it before I send it off to be installed.
I have read many of your posts across multiple threads, and you are obviously quite knowledgeable -> especially in the coding Department!

Are you sure it's going to install?
Once you Root it or various other custom changes the updates will not install.
It checks if you were tampering with the phone and will deny the update.. even if you can download it.
Thanks for the kind words but i am not sure off hand unless i search around.
One thing you try doing is search online etc with the words Blur, Update, Zip, Location
Or if you have a file manager with root you can search for it.
The benefit of the full packages available is they just install on any phone with no checks.
It's also not an update but the full installer.
So i think it's possible you may download an update with patches.
So it will see what you had before and patch those files.
Which could make saving & using the update again later problematic
..especially if you root !
If you upload it publicly we can check and see if it's a full install or a patch by looking at updater-script probably.
If i were you i would keep tabs on the Firmware repositories to see if the Wind package gets uploaded.
Then you will have a full install you can use coming from most others and with the security checks removed.
If you have something that can search your system files installed you can try searching for something that
will probably have Blur in the file name and be a flashable zip file.
If you have TWRP installed i think you can just load that and look around with the Built-In File Manager.
I am eating lunch so i might look on the web soon and check back here.. good luck.
Sorry i have not done it before so maybe someone who has can speak up or you can find one of their topics here.

The OTA update file is in the device main memory in data/data/com.motorola.ccc.ota/app_download

Thanks hedimahf i will save that for future reference.
Also lenigma1too i am pretty sure if you rooted your phone then you can not install that update.
Those type of updates are risky for us that customize our phones.. be careful.. make plans to fix it ahead of time
Unless my phone was stock (not rooted) with the default recovery and an original factory locked bootloader
i myself would not even attempt to install the update.
Google it and see the many people talking about BootLoop problems
I bet there is also little difference between Wind, Rogers or Telus aside from a couple small APK's and the Modem data stuff.
If all three have the same radio band support then i wouldn't worry too much about which one to use.
Although you may end up struggling to get your phone calls and text's etc working again if you switch like that.
The Telus one i tried just had 1 extra APK the "My Telus" app and a shortcut to it on the phone.. i uninstalled it with ease.
Other than that i did not see ANY other app's installed that were not standard on the USA/EU retail versions etc
EDIT:
Oh and the BootLogo was like on Lollipop but slightly more blue.
And the Boot animation was new too.. Marshmallow Telus has "Stitches World" video.
The default wallpapers and the collection of them were like on Lollipop too.
EDIT:
My point was the Telus firmware only had "branding" with that one app.
Otherwise the word Telus does not show up anywhere really.
Also i tend to compare packages so i am keeping my eye out so i can see what is different.
If you want i can PM you if i run across Wind version.

Can this be insstalled on a stock 5.1 xt1528? if so how? thanks

abispac said:
Can this be insstalled on a stock 5.1 xt1528? if so how? thanks
Click to expand...
Click to collapse
I don't think you understood what this topic was about.
He was asking how to capture an OTA update.
Didi you read what was said?

The needed flashing method?
xpmule said:
Marshmallow v6.0 24.65.39 Telus XT1527 downloading now..
someone already ripped it into a standard package.
So OP you are in luck someone did the work for you :good:
I am downloading this one but there is one for Rogers too..
XT1527_SURNIA_RETCA-TELUS_6.0_MPI24.65-39_cid14_subsidy-TELUS_CFC.xml.zip
/file/10vpb6d09x43/XT1527_SURNIA_RETCA-TELUS_6.0_MPI24.65-39_cid14_subsidy-TELUS_CFC.xml.zip
Source + Rogers version etc:
/folder/752fdb49361c7f62/?sort=filename&order=ASC&show=100&page=2
Can those compiled zip files in filefactory website be installed using TWRP recovery or are they created to be installed using desktop ADB software only?
Click to expand...
Click to collapse

hedimahf said:
xpmule said:
Marshmallow v6.0 24.65.39 Telus XT1527 downloading now..
someone already ripped it into a standard package.
So OP you are in luck someone did the work for you :good:
I am downloading this one but there is one for Rogers too..
XT1527_SURNIA_RETCA-TELUS_6.0_MPI24.65-39_cid14_subsidy-TELUS_CFC.xml.zip
/file/10vpb6d09x43/XT1527_SURNIA_RETCA-TELUS_6.0_MPI24.65-39_cid14_subsidy-TELUS_CFC.xml.zip
Source + Rogers version etc:
/folder/752fdb49361c7f62/?sort=filename&order=ASC&show=100&page=2
Can those compiled zip files in filefactory website be installed using TWRP recovery or are they created to be installed using desktop ADB software only?
Click to expand...
Click to collapse
They are intended to used with RSDLite or ADB.
They are found on the big Firmware topic(s) here. (first post over there for links)
You should check out the discussion going on for help with that on those topics for best information.
Putting Firmware from on model onto another may break your ability to make phone calls
and then you would have to try and fix it somehow and it starts to get complicated.
Which is why those other topics are so valuable.. good luck.
I repeat the 2 zip's mentioned are NOT flashable-zip's. (they are just a normal zip file for storage)
Click to expand...
Click to collapse

A new OTA rolled out for many users.
I found it in root /cache
I am working on restoring my phone to stock and applying it.
I don't see anyone making a non-sign firmware package so..
EDIT:
I got it installed now.. it says Patch Level DEC 1st 2016 (instead of February)
System version version 24.71.4
I guess i have to re-apply a ton of changes now

Galaxy S5 SCL23 (SM-G900J)

Hello.
I just recently got Galaxy S5 which appears to be only sold in Japan. There's some custom firmware installed on it which prevents Android to be updated. Phone doesn't have SIM locked, so any SIM card can be used.
Because the forum doesn't allow me to post link to a screenshot which shows firmware info I'll just write it down.
Android version:
4.4.2
Baseband version:
SCL23KDU1BNE4
Kernel version:
3.4.0
[email protected] #1
Wed May 14 19:59:35 KST 2014
Build number:
SCL23KDU1BNE4
SE for Android status:
Enforcing
SEPF_SCL23_4.4.2_0011
Wed May 19:59:13 2014
Hardware version:
G900J.07
Security software version:
MDF v1.0 Release 2
VPN v1.4 Release 1
Click to expand...
Click to collapse
I'd like to completely wipe this firmware from the device, replace it with the latest Android version (6.0?) and root it. At first I'd like to know if it's even possible to do any kind of firmware changes on this model and what exactly do I need to perform the update/root.
Thanks.

Doesn't look like there is a 6.0 stock ROM for it, but you can upgrade to 5.0 here
http://updato.com/firmware-archive-select-model?r=&v=&q=SCL23
Flash with ODIN (Instructions all over the forum many times)

Okay, instructions on updato seems quite easy to follow so that shouldnt be a problem. Is there any recommended tool for root? I've found a lot of them and I really don't want to mess something up.
PS: How come there's no stock ROM for 6.0 even tho it's been mentioned in some articles that SCL23 model is also supported by Marshmallow update?

Anyone?

Okay, update to 5.0 passed without any issues. There are some default japanese applications on the phone which I cannot uninstall, is it possible to get rid of those somehow?

I have the same device Do you update succeeded or not

I installed Android 6.0.1 and the network was missing help someone Galaxy scl23 or give the firmware 4.4.2 or help to find the GSM network

zaza66 said:
I installed Android 6.0.1 and the network was missing help someone Galaxy scl23 or give the firmware 4.4.2 or help to find the GSM network
Click to expand...
Click to collapse
Go to this link & download 4.4.2 then follow this tutorial.
Make sure to use key input from the options & use capital letters where needed. All being well you will have everything working again.
Make sure not to use any download manager for the download link. File gets about 100kbps so it'll take a few hours but you will get it.
I did the above then rooted the phone & flashed correct TWRP version to it then flashed 5.0 Lollipop SpaceX rom here. Everything working good & no loss of service on reset or reboot.
Hope it helps

How can I root QL1

I am trying to root my SM-G930P, and I searched this forum, but I'm completely lost.
I can't find information regarding my phone, and I don't know if I can root it or not with the current rom installed and with which method.
Can I root using the instructions given in the following thread ?
Is there a better suited method for my phone?
sorry for this noob post, I usually can find my way around and previously rooted successfully other models, but with this specific model, I'm at loss.
Code:
Software version / Baseband version: G930PVPU5BQL1
Hardware Version: REV0.6
Model number : SM-G930P
Android: 7.0
Android security patch level: 1 december 2017
Kernel version: 3.18.31-12623509 [email protected]
Build number: NRD90M.G930PVPU5BQL1
SE for Android status: Enforcing
Knox version: 2.7.1

https://forum.xda-developers.com/sprint-galaxy-s7/how-to/root-firmware-qg1-tweaks-mods-t3654700
Took me zero effort to find this thread... You're welcome.
Maybe instead of posting a new thread you could just ask in that existing one you found...

Kreatur3 said:
https://forum.xda-developers.com/sprint-galaxy-s7/how-to/root-firmware-qg1-tweaks-mods-t3654700
Took me zero effort to find this thread... You're welcome.
Maybe instead of posting a new thread you could just ask in that existing one you found...
Click to expand...
Click to collapse
As you see, I have SM-G930P and not SM-G930U and there's nothing telling me I can safely apply the same technique in order to get it rooted.
If you can confirm to me I can go ahead, I will glad fully test it.
Thanks for your answer.

I tried this method on P firmware and could not get mobile data to work.

I also have the same phone as the OP and can't find anything recent on rooting this P version phone. I didn't have any issues with rooting s3-s6 on version. Usually the info is more concise and easier to find. I'm not a coder by anymeans, thank you to the people who come up with these roots and rom version. If anyone has any info on rooting P I'd also love the help.

any update on this? on QL1, avoiding the TAA update to RA1 until I know i can root either of them

I am also interested in this...

Bootloop on Samsung Galaxy S7 g930p NRD90M.G930PVPU5BQL1
Sorry if i'm posting in the wrong thread about this topic. Please bump me to the correct thread.
Sprint Samsung Galaxy S7
I tried rooting my s7 g930p NRD90M.G930PVPU5BQL1 from watching a video on youtube. I used odin and file Samsung_G930x_QC_Rooted_BOOT.TAR Now my phone bootloops.
Can anyone point me to the right direction?

Jkoufiles said:
I tried rooting my s7 g930p NRD90M.G930PVPU5BQL1 from watching a video on youtube. I used odin and file Samsung_G930x_QC_Rooted_BOOT.TAR Now my phone bootloops.
Can anyone point me to the right direction?
Click to expand...
Click to collapse
Same here. been working to to restore it but so far the above tar file you posted is the only one that odin "likes". (all the others fail)

I'm in the same boat with the same phone on Sprint. What about using one of the "one click root" methods such as cf-auto-root. It seems like it will create a custom package for this phone. Has anyone tried it?

Rooting Asus Z010D - Delete this

Duplicate thread exist with same issue.

sunily said:
Hi,
I know I am late to the party to root this phone, but didn't want to spoil the warranty earlier then got busy with my work. But this phone is getting slow, so I think this is right time to root. As this thread says, I want to root my Asus Z010D. Frankly I never did rooting and there are so many articles when I did google. There are also multiple download links to download ADB, TWRP, SuperSu etc. I am not sure which are right files as some are just labeled as recovery. I created new thread so I can post updates how it goes and ask for help rather than hijacking any other threads.
Below is my phone details:
Model: ASUS_Z010D
Andriod version: 6.0.1
Baseband version: M3.3.11-ZC550KL_215421_8916
Kernel version: 3.10.49-perf-g99b6098
Build Number: MMB29P.WW_Phone-13.8.26.110-20180110
060020723_201603020037
I have already downloaded
1. ADB 1.4.3,
2. 8916_SIGNED_Android_M_UnlockTool_2016_0715.apk
3. TWRP-3.1.1-Z010DD-20171001-by-AudaHadi
4. PRO-SuperSU-v2.67
5. A file named recovery from some thread of xda forum of same Asus model
Do I need anything else other than above files?
Are there new ROMs available for this?
What are next steps?
Are the steps given in below link are sufficient?
www stechguide.com root-and-install-twrp-recovery-on-asus-zenfone-max
Click to expand...
Click to collapse
Please delete this thread as it is duplicate.

i need some help/suggestions on updating LOS my S5 klte

hi, i have a s5 (klte) SM-G900M the device is from the carrier claro from the Dominican Republic (LatinoAmerica) and im running LOS on the Nov 8 (2017) Build and i haven't updated the OS since then, i have been experiencing some random reboots when using open camera and other occasions, and i want to update the device to the latest build, but i have been told that the new s5 builds require the latest baseband ,back when i installed lineage os , my phone was on lolipop and i installed LOS on the phone without updating to Marshmellow (my bad :l), im running this baseband version: G900MUBU1BOE2 (wich was released in 2015), i have tried to find the "latest" version of the baseband but that seems to be the latest one for my particular device (the Dominican Republic S5) was released in 2015 , and i don't know if istalling another more update version of the baseband of other country, will introduce problems with the carriers from my country (The Dominican republic) , i have a backup of the stock touchwiz rom , but apparently i can't install the OTA because i have TWRP 3.1.1 installed and since it replaced the stock recovery, the OTA is no longer possible to install, i would greatly appreacite any help regarding this situation :/

THEwed123wet said:
hi, i have a s5 (klte) SM-G900M the device is from the carrier claro from the Dominican Republic (LatinoAmerica) and im running LOS on the Nov 8 (2017) Build and i haven't updated the OS since then, i have been experiencing some random reboots when using open camera and other occasions, and i want to update the device to the latest build, but i have been told that the new s5 builds require the latest baseband ,back when i installed lineage os , my phone was on lolipop and i installed LOS on the phone without updating to Marshmellow (my bad :l), im running this baseband version: G900MUBU1BOE2 (wich was released in 2015), i have tried to find the "latest" version of the baseband but that seems to be the latest one for my particular device (the Dominican Republic S5) was released in 2015 , and i don't know if istalling another more update version of the baseband of other country, will introduce problems with the carriers from my country (The Dominican republic) , i have a backup of the stock touchwiz rom , but apparently i can't install the OTA because i have TWRP 3.1.1 installed and since it replaced the stock recovery, the OTA is no longer possible to install, i would greatly appreacite any help regarding this situation :/
Click to expand...
Click to collapse
I couldn't find firmware for Dominican Republic but it looks like Ecuador shares the same firmware as you so try the below
https://www.sammobile.com/firmwares/galaxy-s5/SM-G900M/EBE/download/G900MUBS1CQD5/166984/
Or this one from Columbia
https://samsung-firmware.org/download/Galaxy__S5__/58l3/COB/G900MUBS1CQD5/G900MCOB1CPI1/
Place in AP section of odin
Once flashed go into recovery mode and perform a data wipe/factory reset
Also update your twrp version if you want to flash later custom roms

thanks!!
i have a few more questions:
1-)wich version of TWRP do you recomend for lineage 15.1? i heard some people having problems with the latest version
2-) if one day i want to revert to stock how do i aproach this? since my backup is from lolipop , and i dont think that the new firmware will play nice with that (in case i plan to sell the device or something)
3-) do you now if the latest magisk version works well with lineage 15.1?

THEwed123wet said:
hi, i have a s5 (klte) SM-G900M the device is from the carrier claro from the Dominican Republic......
Click to expand...
Click to collapse
So you want to update your Baseband Modem to the latest version before updating your LineageOS Firmware to 15.1.
The following link has the latest one for your device that's provided by haggertk. haggertk is one of the Official Lineage Team members.
https://androidfilehost.com/?fid=746010030569966172
Download the file on your PC, place your device in Download Mode (aka Odin Mode), then connect your device to your PC via USB Cable, Open Odin and place the downloaded file in your AP (or PDA) spot in Odin (nothing further) and start the flashing process.
It's fairly quick to accomplish, you won't loose anything on your device and, afterwards, you should be good to go for Updating to the LineageOS 15.1.
Just an FYI... The following is the Official LineageOS 15.1 thread that's specific to the klte devices for support and guidance.
https://forum.xda-developers.com/showthread.php?t=3830497
I wish you the best of luck and enjoy LineageOS 15.1!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900V device.

THEwed123wet said:
thanks!!
i have a few more questions:
1-)wich version of TWRP do you recomend for lineage 15.1? i heard some people having problems with the latest version
2-) if one day i want to revert to stock how do i aproach this? since my backup is from lolipop , and i dont think that the new firmware will play nice with that (in case i plan to sell the device or something)
3-) do you now if the latest magisk version works well with lineage 15.1?
Click to expand...
Click to collapse
1 - latest version of twrp - nothing wrong with it
2 - just flash stock firmware via odin
3 - latest version of magisk works fine with lineageos 15.1

THEwed123wet said:
1-)wich version of TWRP do you recomend for lineage 15.1? i heard some people having problems with the latest version.
Click to expand...
Click to collapse
This is a tricky question. The issues experienced are not all for the same variant. For example, some of the issues are for G900F but, my G900V hasn't experienced any issues.
Just keep in mind that if you experience any issues, you can always Downgrade it without a problem.
2-) if one day i want to revert to stock how do i aproach this? since my backup is from lolipop , and i dont think that the new firmware will play nice with that (in case i plan to sell the device or something)
Click to expand...
Click to collapse
Reverting to stock is not difficult because you just need the Stock Firmware and, possibly, the pit file (that's also available on the SamMobile forum and androidfilehost as well).
3-) do you now if the latest magisk version works well with lineage 15.1?
Click to expand...
Click to collapse
This is best asked on the following Official General Q&A Magisk thread.
https://forum.xda-developers.com/showthread.php?t=3432382
I wish you the best of luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900V device.

Thanks a lot for the help!! ,i like your detailed asnwers , will be updating after the new build comes out since last one failed to build

THEwed123wet said:
Thanks a lot for the help!! ,i like your detailed asnwers , will be updating after the new build comes out since last one failed to build
Click to expand...
Click to collapse
There's been 4 Official LineageOS 15.1 builds that's been released so far but, Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900V device.