Hello, I recently bought this android unit as title, works a charm and I have only 1 problem that I will write down here.
The problem is regarding the touch panel buttons at start they were working after 1 change in factory settings for enabling the lights, because from installment they were disable, this problem occurred.
I tried various contacts thru the seller and Xtrons itself but no reply so hopefully this majestic and formidable XDA community can help me.
Here is the info of my unit
Build number
PX30
Kernel
4.4.167
MCU
MTCE_GS_V3.07_3
Any other info required I will write or upload ASAP but for the moment thanks in advance.
Regards
David
solved, needed to restudy the keys in factory settings.
Related
Hello guys,
i've got the one question for you. Before Im going to ask u. You have to know that i have tried find solution for hours. Trust me. Im out of my mind allready and dont know what to do next. I have bought 2din head unit to my Skoda Octavia car. Head unit has android 4.2.2 KK but I can not find out the TYPE of device. There is only - CAR AUDIO.
-I have only these specification
-kernel 3.4.67
-Build version - ALPS.LD_kk1.MP10.V1.6
-MCU - SM92A1. 160720.V1.1.JLY-B3
I wanna update android version to 4.4.4. - I have problems with can bus (wrong doors open showed, boot logo is not right, lights can not switch to other colors etc etc) but I can not find FIRMWARE for my unit. I red that i would at first update MCU, but I have no experience with this operation.
Is there anyone who could help me? I would appreciate it.
Thx
Wish u good evening.
Dave
same issue...no help anywhere mate
nojmic8 said:
Hello guys,
i've got the one question for you. Before Im going to ask u. You have to know that i have tried find solution for hours. Trust me. Im out of my mind allready and dont know what to do next. I have bought 2din head unit to my Skoda Octavia car. Head unit has android 4.2.2 KK but I can not find out the TYPE of device. There is only - CAR AUDIO.
-I have only these specification
-kernel 3.4.67
-Build version - ALPS.LD_kk1.MP10.V1.6
-MCU - SM92A1. 160720.V1.1.JLY-B3
I wanna update android version to 4.4.4. - I have problems with can bus (wrong doors open showed, boot logo is not right, lights can not switch to other colors etc etc) but I can not find FIRMWARE for my unit. I red that i would at first update MCU, but I have no experience with this operation.
Is there anyone who could help me? I would appreciate it.
Thx
Wish u good evening.
Dave
Click to expand...
Click to collapse
same issue...no help anywhere mate
nojmic8 said:
Hello guys,
i've got the one question for you. Before Im going to ask u. You have to know that i have tried find solution for hours. Trust me. Im out of my mind allready and dont know what to do next. I have bought 2din head unit to my Skoda Octavia car. Head unit has android 4.2.2 KK but I can not find out the TYPE of device. There is only - CAR AUDIO.
-I have only these specification
-kernel 3.4.67
-Build version - ALPS.LD_kk1.MP10.V1.6
-MCU - SM92A1. 160720.V1.1.JLY-B3
I wanna update android version to 4.4.4. - I have problems with can bus (wrong doors open showed, boot logo is not right, lights can not switch to other colors etc etc) but I can not find FIRMWARE for my unit. I red that i would at first update MCU, but I have no experience with this operation.
Is there anyone who could help me? I would appreciate it.
Thx
Wish u good evening.
Dave
Click to expand...
Click to collapse
i have the same problem and i thing we have the same multimedia
Hello to everybody! I'm following this great forum since years, thanks for that!!!
I found myself in a mess with this head unit. I've a BMW Series 1 116i F20 of 2011 with NBT System.
I've a problem with this Android head (information at the bottom of the post), the unit is working fine but not with CanBus, I mean:
When I use (rotate) the iDrive, the encoder move the BMW system but ALSO the Android system.
The mess starts when I'm on Android and it moves and apply changes to the BMW system.
It's working bidirectional and that's not ok.
I spoke with the Coika Service trough Skype, and they sent me a MCU and firmware update, but it did not solved any issue.
I also tried to change the expert menu, with password 8888, no way.
Now the service is saying to me that I have to wait them engineers could find the same model of my BMW in China for fixing the CanBus problem.
CarPlay is working fine, also the microphone of the car and so on and I can see the BMW system display into the Android unit.
****************************
Model: 8227L_demo
Android ver.: 6.0
Kernel ver.: 3.18.22
[email protected] #1
Build nr.: android-trunk-m0.AC8227L-V1.0
Custom build: android-trunk-m0.AC8227L-V1.0
Before the update:
Version: BMWID_OS_1.29
MCU: Z00_B0_Y8_181105A
After the update:
Version: BMWID_OS_1.38
MCU: Z00_BM_YC_190415A
Here the pics of for the info
MCU: https://imgur.com/a/XdRAVg0
Secret1: https://imgur.com/1T6gmLR
Sys1: https://imgur.com/0phz617
Sys2: https://imgur.com/hPvjA3u
MCU File: http://s000.tinyupload.com/index.php?file_id=00996334513943318846 (more or less 50kb)
Android System file: It's more or less 1GB, if needed I can upload it.
Style of the Unit https://imgur.com/WUfpeAi
That's not an unit with CD reader, it's only an head.
****************************
Anyone has an Idea of how to fix it?
Thanks in advance guys!
Have a great day!
Nobody guys?
?
Nobody?
Nobody recognize the MCU?
Nobody nobody?
Nobody could help with reverse engineering of the MCU file?
the skype of coika?
he thing that happened I have a problem like you have the skype of coika to be able to ask some questions about my case
Hello mate!
I will send it to you by PM, unfortunately there’s no way to fix it...
If you find a way please inform me.
Thanks!
Can you send coika support contact? I have problem with bluetooth.
Hello guys,
First of all I'm sorry for my bad english (I'm french). :angel:
I bought an idoing head unit for my GT86 (2din px5 4gb/32gb), the screen sometime freezed and I need to do a hard reset of the device (don't matter)
BUT my main problem is that no one can hear me when I make a phone call. I've read that the bug is from the MCU and a software update can solve it. I looked on the parameters and there is these info :
MCU version = KET_[R76DK3]_26_C26D_STM32_CAN(AII)_AMP
Software info = px5-userdebug 8.0.0 OPR5.170623.007 eng.bsp.20180728.083127 test-keys
I asked to IDOING for an update but there is no MCU update from them... When I looked into the firmware package the MCU seems to be a STM32UD... I can't add external link to the last firmware in my topic but I can give it by private message if it can help you to help me
Can you help me to fix this bug please ? Or find a custom rom that match my hardware.. ? I'ld really appreciate :good::good::good:
Best regards,
Xavier
No one has a solution ? I tried to connect a bluetooth dongle "Comfast CF-WU725B" but it didn't works...nothing happened I just can't use it on my head unit, it only works on my computer (not working on my phone or head unit)
Hi All,
Request your assistance to help me determine the below headunit installed in my car and a possible upgrade / update for it. Also, can someone please share the password to enable USB debugging mode, I have searched and found that default password is [email protected] but doesn't seem to work.
Android version 7.1.1
MCU version T8.3.19-1-10-616101-180620
System version V8.3.2_20180524.091002_TH6-0-CarPlay808.111351_TH6-0
Awaiting your reply and thanks.
Regards,
May
Hope this gets you started:
Search results for query: T8.3.19
forum.xda-developers.com
@marchnz Thanks!
Good Morning from Egypt
I recently bought this Head unit for my opel Astra J 2016, unfortunately the shop that sells them here advertise them as MK Auto vision MK400 which is just a fake name to hide the original manufacturer or seller in China and removes all stickers and labels that show the units origin
I changed some setting in the canbus/ box menu and cant get it to work as it was before
Can someone tell me the following please:
1- real name / brand / model of this head unit
2- Correct configuration for Opel Astra J 2016
3- How can I connect the TPMS to the head unit configuration ? i see there is a TPMS section which shows a car but I can't find anyway to connect them
4- what is the latest software / firmware for this head unit?
5- I cant access developer or engineer mode I tried all kind of passwords 8888 12345678 0000 , what is the right code?
6- The english used for the menus is really bad , You cant even understand what does the function do , did any one succeed in understanding what every option do ?
Thank You in advance
As you might have seen from the many other posts like this, post full details from system information, including mcu version. Crystal Ball not working today.
ahassanmaly said:
Good Morning from Egypt
I recently bought this Head unit for my opel Astra J 2016, unfortunately the shop that sells them here advertise them as MK Auto vision MK400 which is just a fake name to hide the original manufacturer or seller in China and removes all stickers and labels that show the units origin
I changed some setting in the canbus/ box menu and cant get it to work as it was before
Can someone tell me the following please:
1- real name / brand / model of this head unit
2- Correct configuration for Opel Astra J 2016
3- How can I connect the TPMS to the head unit configuration ? i see there is a TPMS section which shows a car but I can't find anyway to connect them
4- what is the latest software / firmware for this head unit?
5- I cant access developer or engineer mode I tried all kind of passwords 8888 12345678 0000 , what is the right code?
6- The english used for the menus is really bad , You cant even understand what does the function do , did any one succeed in understanding what every option do ?
Thank You in advance
Click to expand...
Click to collapse
Use this part of the tutorial to find the info that will help us understand what head unit you got. We'll need a pic of System Info and Kernel
marchnz said:
As you might have seen from the many other posts like this, post full details from system information, including mcu version. Crystal Ball not working today.
Click to expand...
Click to collapse
ahassanmaly said:
View attachment 5422849View attachment 5422851View attachment 5422853View attachment 5422855View attachment 5422859
Click to expand...
Click to collapse
Okay so you have a Unisoc UMS512 Android Head unit
iceblue1980 said:
Okay so you have a Unisoc UMS512 Android Head unit
Click to expand...
Click to collapse
Thank You and do you have an answer for my previous questions regarding this unit?
Hi, unit is [TS 10] requesting moderator moves to [Android Head-units] forum.
iceblue1980 said:
Okay so you have a Unisoc UMS512 Android Head unit
Click to expand...
Click to collapse
The processor doesn't define the head unit, he has a TS10 type
marchnz said:
Hi, unit is [TS 10] requesting moderator moves to [Android Head-units] forum.
Click to expand...
Click to collapse
Thank You
Do you have an answer to below questions please ?
1- Correct configuration for Opel Astra J 2016
2- How can I connect the TPMS to the head unit configuration ? i see there is a TPMS section which shows a car but I can't find anyway to connect them
3- what is the latest software / firmware for this head unit?
4- I cant access developer or engineer mode I tried all kind of passwords 8888 12345678 0000 , what is the right code?
5- The english used for the menus is really bad , You cant even understand what does the function do , did any one succeed in understanding what every option do ?