Does anyone recognize the following versions? I'm looking for either a custom ROM or root.
MCU version 20180911-1-KC1-24
OS Version BSP 2.4.4.3.12 - IVT - 181115
This is a slim/narrow/shallow Android 7.1.1 device with AllWinner T3 processor, 2GB RAM, 16GB storage.
If it helps, some of the non-AOSP system apps are:
- com.hzbhd.canbusairinfo
- com.hzbhd.canbuscarinfo
- com.hzbhd.scanner
- com.hzbhd.misc
- com.hzbhd.midware.service
sun8iw11p1_KC1C01W1.img
MCU: STM32-20190828-11-KC1-30
https://cobaltr4.ru/ск…nqi-allwinner-t3/#_MCU
ahmed68 said:
sun8iw11p1_KC1C01W1.img
MCU: STM32-20190828-11-KC1-30
https://cobaltr4.ru/ск…nqi-allwinner-t3/#_MCU
Click to expand...
Click to collapse
Salve i firmaware funzia bene ma mcu si blocca a 7%
here is my rom
https://drive.google.com/drive/folders/1jdHLqmuIbw1Ko2fYOUDlqkxbbmUo1ghv?usp=sharing
sharing for developers -)
on the same page all the information about the firmware.
Android 9.0 Firmware and MCU for Aikon Atom (Zhan)
https://aikonmultimidia-my.sharepoi...NGgMADwgThIzcBtkqpP-YHMPmKOFjlLqB8LA?e=7a8vnD
https://aikonmultimidia-my.sharepoi...VAngVTu7T1myABcG-hhIaBfcje7NfwTJzlhQ?e=fDoaS4
Sent from my SM-G973F using Tapatalk
Is this for vertical or horizontal units?
can you reshare the links?
---------- Post added at 12:09 PM ---------- Previous post was at 12:08 PM ----------
hugorafael said:
Android 9.0 Firmware and MCU for Aikon Atom (Zhan)
https://aikonmultimidia-my.sharepoi...NGgMADwgThIzcBtkqpP-YHMPmKOFjlLqB8LA?e=7a8vnD
https://aikonmultimidia-my.sharepoi...VAngVTu7T1myABcG-hhIaBfcje7NfwTJzlhQ?e=fDoaS4
Sent from my SM-G973F using Tapatalk
Click to expand...
Click to collapse
can you reshare the links?
here it is
https://drive.google.com/open?id=1I8NYOk0qcGwRbrLhpzauyWJ_GJ9LWEWB
mclaudio said:
here it is
https://drive.google.com/open?id=1I8NYOk0qcGwRbrLhpzauyWJ_GJ9LWEWB
Click to expand...
Click to collapse
So I'm wanting to mess with the firmware of my joying 9853i and mind you I have never built a rom. So it will be a learning curve for me. But I am capable. Joying said they would not give me their source to use is there a way this can be adapted for that?
RLKirk said:
So I'm wanting to mess with the firmware of my joying 9853i and mind you I have never built a rom. So it will be a learning curve for me. But I am capable. Joying said they would not give me their source to use is there a way this can be adapted for that?
Click to expand...
Click to collapse
Sure pm
Enviado do meu SM-N975F através do Tapatalk
hugorafael said:
Android 9.0 Firmware and MCU for Aikon Atom (Zhan)
Click to expand...
Click to collapse
Hugo,
Boa tarde... Poderia postar um tutorial de como proceder a atualização do Aikon Atom utilizando os arquivos que você disponibilizou?
Saudações,
Clovis
clovisyk said:
Hugo,
Boa tarde... Poderia postar um tutorial de como proceder a atualização do Aikon Atom utilizando os arquivos que você disponibilizou?
Saudações,
Clovis
Click to expand...
Click to collapse
pode partilhar os ficheiros?
mclaudio said:
pode partilhar os ficheiros?
Click to expand...
Click to collapse
Caro mclaudio,
Infelizmente devido as regras do fórum, ainda não me é permitido postar links externos ao fórum enquanto eu não alcançar o mínimo de 10 postagens.
Se quiser, pode me informar seu e-mail para eu lhe enviar o link dos arquivos que farei upload em algum servidor.
At.,
Clovis
Ola amigo... poderia enviar par ao meu e-mail?
[email protected]
Obrigado
TS9 (Spreadtrum SC9853I) Android 9
I am looking for device information and firmware+mcu updates. I had no information about device manufacturer and so on.
Please, can you check out my screenshots here and help me? TS9 (Spreadtrum SC9853I-IA) - Android 9
For any others having the same unit as mine, please follow my own thread here: TS9 (Spreadtrum SC9853I) 4/64G Android 9
Thank you! :fingers-crossed:
Help with Custom Firmware
hi Guys
This is my information from my headunit.
Can anyone help me to understand if i can upgrade to better rom.
Kernel: #682 SMP PREEMPT Thu dec 5 18:27:43 CST 2019
platform: (12) 6313 LFN Full Band carplay
touch: goodix 911_1060(f0c9fbc9)E:0
panel:L8-Normal-1024X600_48M 20190115 10:35:48
cust: Mon Jul 8 23:51:28 2019
radiotype: tda77xx_7786(0)
audiotype:dsp55
APP 1024x600 2019-12-31 22:33:04
Version MCU
2019.08.17 09:56:13 CZY_53_L82_G32P48F64_ Ver.1.0
Info de la CPU
CPU: Intel X86_OCTA-CORE 1.8GHz SC9853 4+64GB
Version de Android
10.0
Version 10 is a fake i use hw info device and send me if a 8.1 orea api 27
Regards
MB
Hi everyone,
I hate to piggy-back on other people's threads, but I have a *smartphone* with the same SoC (Leagoo T5c with the SC9853i-IA by Unisoc/Spreadtrum), and I'd like to know if this ROM can be installed on it, or if it's just for Android Auto devices?
UglyStuff said:
Hi everyone,
I hate to piggy-back on other people's threads, but I have a *smartphone* with the same SoC (Leagoo T5c with the SC9853i-IA by Unisoc/Spreadtrum), and I'd like to know if this ROM can be installed on it
Click to expand...
Click to collapse
No. You cannot. This firmware contains a lot of specific hardware drivers for these units, a crippled bluetooth and USB-stack, and all kind of interfaces to the specific MCU firmware and hardware.
surfer63 said:
No. You cannot. This firmware contains a lot of specific hardware drivers for these units, a crippled bluetooth and USB-stack, and all kind of interfaces to the specific MCU firmware and hardware.
Click to expand...
Click to collapse
Thanks, that's what I was afraid of. I'm amazed at how a unit with this SoC can run Android 9, and my phone can't get get past Android 7, though.
Aren't there drivers out there for an SC9853i-IA-based phone to upgrade Android?!
hugorafael said:
Android 9.0 Firmware and MCU for Aikon Atom (Zhan)
https://aikonmultimidia-my.sharepoi...NGgMADwgThIzcBtkqpP-YHMPmKOFjlLqB8LA?e=7a8vnD
https://aikonmultimidia-my.sharepoi...VAngVTu7T1myABcG-hhIaBfcje7NfwTJzlhQ?e=fDoaS4
Sent from my SM-G973F using Tapatalk
Click to expand...
Click to collapse
Can you reupload the firmware it seems deleted.
hugorafael said:
Android 9.0 Firmware and MCU for Aikon Atom (Zhan)
https://aikonmultimidia-my.sharepoi...NGgMADwgThIzcBtkqpP-YHMPmKOFjlLqB8LA?e=7a8vnD
https://aikonmultimidia-my.sharepoi...VAngVTu7T1myABcG-hhIaBfcje7NfwTJzlhQ?e=fDoaS4
Sent from my SM-G973F using Tapatalk
Click to expand...
Click to collapse
Could you please repost the firmware and MCU download links since I updated my multimedia with the joying firmware and now neither bluetooth nor wifi work right, thank you
ganjasa said:
Help with Custom Firmware
hi Guys
This is my information from my headunit.
Can anyone help me to understand if i can upgrade to better rom.
Kernel: #682 SMP PREEMPT Thu dec 5 18:27:43 CST 2019
platform: (12) 6313 LFN Full Band carplay
touch: goodix 911_1060(f0c9fbc9)E:0
panel:L8-Normal-1024X600_48M 20190115 10:35:48
cust: Mon Jul 8 23:51:28 2019
radiotype: tda77xx_7786(0)
audiotype:dsp55
APP 1024x600 2019-12-31 22:33:04
Version MCU
2019.08.17 09:56:13 CZY_53_L82_G32P48F64_ Ver.1.0
Info de la CPU
CPU: Intel X86_OCTA-CORE 1.8GHz SC9853 4+64GB
Version de Android
10.0
Version 10 is a fake i use hw info device and send me if a 8.1 orea api 27
Regards
MB
Click to expand...
Click to collapse
Have you a rom for thisone? it is head unit KIMI K4 - im looking for rom for this MCU
ganjasa said:
Help with Custom Firmware
hi Guys
This is my information from my headunit.
Can anyone help me to understand if i can upgrade to better rom.
Kernel: #682 SMP PREEMPT Thu dec 5 18:27:43 CST 2019
platform: (12) 6313 LFN Full Band carplay
touch: goodix 911_1060(f0c9fbc9)E:0
panel:L8-Normal-1024X600_48M 20190115 10:35:48
cust: Mon Jul 8 23:51:28 2019
radiotype: tda77xx_7786(0)
audiotype:dsp55
APP 1024x600 2019-12-31 22:33:04
Version MCU
2019.08.17 09:56:13 CZY_53_L82_G32P48F64_ Ver.1.0
Info de la CPU
CPU: Intel X86_OCTA-CORE 1.8GHz SC9853 4+64GB
Version de Android
10.0
Version 10 is a fake i use hw info device and send me if a 8.1 orea api 27
Regards
MB
Click to expand...
Click to collapse
Hi, I have a Winca sim card monitor with the same platform. I want to see what ussd code works on it to change imei? You can use this link to update to version 11:
بروزرسانی مانیتور وینکا اس300 اندروید 11 (WINCA S300 - (RL855 - RL856 7 8
آپدیت مانیتور وینکا اندروید 8/9/10 به 11 ،ارتقا به جدید ترین نسخه اندروید، فایل Update بروزرسانی فریمور ، همراه با آموزش نصب و حل مشکل بلوتوث سری اس 300 s
wincamarket.ir
Hi guys! I ask for your help, a few days ago I bought an android radio unit on aliexpress, specifically the Junsun brand, with these characteristics:
Model: 8227L
Android version: 8.1.0
Kernel version: 3.18.79 (gcc version 6.3.1 20170404 (Linaro GCC 6.3.2017.05) [email protected] #57
Comp. Number: alps.mp.o1.mp5
2GB Ram
32Gb Rom
7 inch
With Canbus (ford mondeo 2007)
Its my first time with an android radio unit and I am very lost, I would like to know if I can change the firmware or update it, the one that it brings is very limited and does not let me change the brightness of the device or bluetooth functions.
Thank you for support!
Hey guys
I just purchased and installed a Witson 8236 (10.25") Android head unit running Android 8.1 powered by an rk3399 CPU on my BMW X3 2014
i dont wont the radio OEM BMW .. there is any APK RADIO FM there i installing?on FM and no need internet connection..
and last QUE this is my VER:
MCUVer: 615043bALS-CIC-HW7-190109[B1280_170325]
FrameworkVer: 8.1.0 OPM5.171019.019 eng.zxw.20181228.162012
AndroidVer 8.1.0
APPVer: 2019040301_1280x480_970
Nandflash: 24.34G/25.33
RAM: 2G
There is any UPDATE to the VER that i can download?
Thanks
Hello to all, one question ...
Will this canbus device work with my Peugeot 308 mk1 (2011year) ?
Has any of you tried to replace original CANBUS device that came with multimedia head unit?
This is for Peugeot head units (buy link in ALi Express) , I can't find any canbus like mine but this is the closest:
https://www.aliexpress.com/item/1005002928568518.html?spm=a2g0s.8937460.0.0.20f02e0edjaDEt
Multimedia unit is ALPS FF5000 / with 8227L based firmware
Model 8227L
CPU AC8227L QuadCore 1,2 GHz MTK8227L
RAM DDR3 1 GB
ROM 16GB
IPS 1024x600
GPS MT6625L
Radio TDA7786
DAC TDA7851L 4x45W
Wi-Fi MT6625L 802.11n
Bluetooth MT6625L 4.0
Android 8.1.0
Kernel 3.18.79 (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05)) [email protected] #90 Fri Sep 14 11:04:34 CST 2018
Build alps-mp-01.mp5
Custom build alps-mp-o1.mp5
HMI KABT_010.2018.09.20.13.30
MCU TS907.180712
MEDIA HC_v1.0.0_180917_0900
BTV BT.18.08.27.0930