{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
Instructions:
Download the latest build, official TWRP and GApps (if you need them)
Boot the downloaded TWRP via fastboot
Flash the latest build
Reboot to bootloader and boot TWRP once again
Flash GApps and any other necessary add-ons
Downloads:
Unofficial builds: SourceForge
Google Apps: OpenGApps (nano package is advisable, but you definitely should avoid using stock/super packages)
Source code:
Common device tree: https://github.com/LineageOS/android_device_xiaomi_msm8953-common
Kernel: https://github.com/AmulyaX/kernel_xiaomi_msm8953_vince
XDA:DevDB Information
LineageOS, ROM for the Xiaomi Redmi Note 5 / 5 Plus
Contributors
AmulyaX
Source Code: https://github.com/lineageos
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Testing
Beta Release Date: 2019-05-20
Created 2019-05-19
Last Updated 2019-05-19
31/05/2019
-Fixed signal delay when rebooting
-Removed QC RIL blobs as they are causing problems with our modem
30/05/2019
-Snap Green Camera fixed
-Disabled HAL3, please enable manually if you want to use GCAM
-Fixed DT2W
-Power profiles back to normal
-Fixed thermals
-Merged with latest sources
20/05/2019
-Fixed Proximity Sensor
-Fixed Ambient Light Sensor
-Added rounded corners and some padding
-Updated power profiles
-Fixed incorrect battery capacity
-Enabled Software keys by default
-Enabled AlwaysOnDisplay
-Updated sensor configurations
-Force legacy apps to use Full Screen Aspect Ratio
-Enabled Camera HAL3 by default (Use GCAM for clicking photos)
-Forced some apps to use HAL1
19/05/2019
-Initial Release
A big thanks to @kmp6669 for helping me with testing!
Announcement
Hello guys! I have been working on this from some time now, I have rebased our trees to more reliable sources which makes this the most efficient for Kernel 4.9 as of now, I'd still like to say this is under testing, my trees are private and I will make them public when I'll solve the upcoming bugs, there will be no major issues at all, just some minor bugs you might face, I don't know yet. I am kickstarting LineageOS builds for vince, I'll maintain this regularly just like my AEX builds! Have fun guys, don't forget to post bugs here, but only if you have logs for them.
Cheers!
TAP HERE TO DOWNLOAD
Hi!
In what is this build different from the great Hitesh Los 16 build?
Will this be official?
Sent from my Note 5 / 5 Plus using XDA Labs
nice,
gardiol said:
Hi!
In what is this build different from the great Hitesh Los 16 build?
Will this be official?
Click to expand...
Click to collapse
This is a new beginning. New trees for vince, should have read the post #3 before.
These trees are official LOS ones I made compatible with vince. They got full 4.9 support, and this is the future of vince. I'll be using these trees for Official AEX too once I make them good enough.
AmulyaX said:
This is a new beginning. New trees for vince, should have read the post #3 before.
These trees are official LOS ones I made compatible with vince. They got full 4.9 support, and this is the future of vince. I'll be using these trees for Official AEX too once I make them good enough.
Click to expand...
Click to collapse
Thank you amulayax, I did read the post #3, i have been using Hitesh build for a long time now and can say it's flawless (with exception of course of WhatsApp greencam issue) and it's on kernel 4.9, so I was wondering in what details your new trees are different?
If you can give some details or some general areas where you expect improvements I think it would be good to know, to make informed decisions, and to help you out with specific testing.
Will your build be "official" LOS? I think this will be important.
Sent from my Note 5 / 5 Plus using XDA Labs
LineageOS 16.0
Changelog
-Fixed Proximity Sensor
-Fixed Ambient Light Sensor
-Added rounded corners and some padding
-Updated power profiles
-Fixed incorrect battery capacity
-Enabled Software keys by default
-Enabled AlwaysOnDisplay
-Updated sensor configurations
-Force legacy apps to use Full Screen Aspect Ratio
-Enabled Camera HAL3 by default (Use GCAM for clicking photos)
-Forced some apps to use HAL1
TAP HERE TO DOWNLOAD
Great work, great dev, keep it up!
AmulyaX said:
LineageOS 16.0
Changelog
-Fixed Proximity Sensor
-Fixed Ambient Light Sensor
-Added rounded corners and some padding
-Updated power profiles
-Fixed incorrect battery capacity
-Enabled Software keys by default
-Enabled AlwaysOnDisplay
-Updated sensor configurations
-Force legacy apps to use Full Screen Aspect Ratio
-Enabled Camera HAL3 by default (Use GCAM for clicking photos)
-Forced some apps to use HAL1
TAP HERE TO DOWNLOAD
Click to expand...
Click to collapse
niceee... been using it for full of day rn. Smooth
On May 19th build the camera is producing 3 quarter green pictures. Will test May 20th build later today (or tomorrow).
@AmulyaX : First off thank you for the build. I really am looking forward for a streamlined Android ROM Small suggestion: I noticed that TWRP is not really coping with encryption/decryption and it's probably a better suggestion (in OP) to use OrangeFox as long as this isn't fixed.
im gonna try this by the way thanks!
Okay, I tested again with May 20th build and no dice.
The picture is 3 quarter green and the rest of the colors are also distorted. This happens with clean install and no GApps (so with the LineageOS Snap app).
Hm ok it seems I can't post example pictures directly: https://imgur.com/a/fAy0cPm
Also I noticed firmware version is 10.0.4.0 for some reason. I updated it to 10.2.1.0, but it's always back to 10.0.4.0, so I guess it's what it defaults to.
NetDwarf said:
Okay, I tested again with May 20th build and no dice.
The picture is 3 quarter green and the rest of the colors are also distorted. This happens with clean install and no GApps (so with the LineageOS Snap app).
Click to expand...
Click to collapse
disable cam2api green pictures issues will be solved but u will lose gcam
Good ROM I really like It and I will try to use it as my daily driver.
For now I noticed some things like the Dark Theme is enabled by default screwing up the Android Setup launcher and few things like.. It makes them look crap and unfinished.
Prevent accidental wake-up not working at all.. nor Double tap to Wake but pretty good rom.
Hopefully those things will get fixed soon. ROM is smooth. Animations are smooth.
The geekbench benchmark score is: 861, 4077 multi. Tho It can be tweaked with kernel.
Hopefully the rom will become official soon but for now It's really good.
No idea weather he Device Performance in Battery Settings makes difference. I switched from Balanced to Performance but nothing. It's fine tho.
Edit: The performance improved after flashing Vimb Kernel. Rom has few bugs but overall very good for Unofficial build.
double tap to wake not work for me
NetDwarf said:
Okay, I tested again with May 20th build and no dice.
The picture is 3 quarter green and the rest of the colors are also distorted. This happens with clean install and no GApps (so with the LineageOS Snap app).
Hm ok it seems I can't post example pictures directly: https://imgur.com/a/fAy0cPm
Also I noticed firmware version is 10.0.4.0 for some reason. I updated it to 10.2.1.0, but it's always back to 10.0.4.0, so I guess it's what it defaults to.
Click to expand...
Click to collapse
well another workaround than losing cam2api is zoom a little, like 0,1 will do :good:
NetDwarf said:
Okay, I tested again with May 20th build and no dice.
The picture is 3 quarter green and the rest of the colors are also distorted. This happens with clean install and no GApps (so with the LineageOS Snap app).
Hm ok it seems I can't post example pictures directly: https://imgur.com/a/fAy0cPm
Also I noticed firmware version is 10.0.4.0 for some reason. I updated it to 10.2.1.0, but it's always back to 10.0.4.0, so I guess it's what it defaults to.
Click to expand...
Click to collapse
Flash GApps and use GCAM. Will fix the cam soon
Moon_420 said:
Good ROM I really like It and I will try to use it as my daily driver.
For now I noticed some things like the Dark Theme is enabled by default screwing up the Android Setup launcher and few things like.. It makes them look crap and unfinished.
Prevent accidental wake-up not working at all.. nor Double tap to Wake but pretty good rom.
Hopefully those things will get fixed soon. ROM is smooth. Animations are smooth.
The geekbench benchmark score is: 861, 4077 multi. Tho It can be tweaked with kernel.
Hopefully the rom will become official soon but for now It's really good.
No idea weather he Device Performance in Battery Settings makes difference. I switched from Balanced to Performance but nothing. It's fine tho.
Edit: The performance improved after flashing Vimb Kernel. Rom has few bugs but overall very good for Unofficial build.
Click to expand...
Click to collapse
JR Bautista said:
double tap to wake not work for me
Click to expand...
Click to collapse
Yeah dt2w is quite dead for now. I tried multiple ways to make it work, but it just didn't. For starters it did turned on, but then it didn't turn off. So I'll see what I can do in coming days.
There are just two minor bugs -: Green pics using Snap and dt2w
Deleted
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
deadman96385
jsnweitzel
johnnyslt
santod040
Somber73
TheBr0ken
CPA-Poke
Cdub50
Features
Code:
* ROM built with UberTC 4.8.4 GCC Toolchain
* CM 12 Theme engine
* Custom Navbar options
* AOKP system animation control
* Listanimation views and interpolator
* Avoid poor wifi connection option
* SuperSu Intergrated
* CM Custom QS Tiles
* Long click option for quicksettings
* LockClock options in settings
* OmniRoms Performance Control
* App Circle Sidebar
* Gesture Anywhere
* Battery icon options
* Headsup customization
* Custom toast animations
* Option to disable screenshot noise
* Filter spam notifications
* Per app control for Lockscreen notifications
* Configurable 0, 90, 180 and 270 degree rotation
* Safe headset volume option
* Less annoying sound notifications option
* Option to use volume keys to control media volume anytime
* Option to customize device hostname
* Option to not wake up device when charge is plugged/unplugged
* Volume rocker wake up
* IME switcher notification control
* Option to disable fullscreen keyboard
* Force autorotation on IME
* Option to force show enter key
* CM's Privacy Guard
* Increasing ringtone option
* Screen Density changer
* Statusbar clock customization
* Option to disable searchbar in recents
* Statusbar brightness control
* Double tap statusbar to sleep control
* Custom Lockscreen shortcuts
* Extra info about your device (About phone/tablet)
* Custom Liquid Logo in about phone/tablet
* Google bug report and ota removed
* Option to show kernel toolchain and other info by tapping kernel version in about phone/tablet
* Timeout and instant lock options added to slide unlock instead of just secure keyguard options
* Developer options enabled by default
* Navigation bar height control
* Show application package name in app info
* LiquidSmooth Stats and Updater added
* Partition size info
* Option to disable immersive messages
Check our Google+ for updates
Source Links
Code:
[url="http://github.com/LiquidSmooth"][COLOR="RoyalBlue"][B]LiquidSmooth Github[/B][/COLOR][/URL]
[url="https://github.com/LiquidSmooth-Devices/android_kernel_samsung_klimtwifi"][B][COLOR="RoyalBlue"]Kernel Source[/COLOR][/B][/URL]
Download Links
Code:
[url="http://www.drdevs.com/devs/teamliquid/Nightly/Galaxy_Tab_S_8.4_Wifi/"][B][COLOR="RoyalBlue"]T700 v4.1 Nightlies[/COLOR][/B][/URL]
[url="http://www.drdevs.com/devs/teamliquid/Nightly/Galaxy_Tab_S_8.4_LTE/"][B][COLOR="RoyalBlue"]T705 v4.1 Nightlies[/COLOR][/B][/URL]
[url="http://www.drdevs.com/devs/teamliquid/Nightly/Galaxy_Tab_S_10.5_Wifi/"][B][COLOR="RoyalBlue"]T800 v4.1 Nightlies[/COLOR][/B][/URL]
[url="http://www.drdevs.com/devs/teamliquid/Nightly/Galaxy_Tab_S_10.5_LTE/"][B][COLOR="RoyalBlue"]T805 v4.1 Nightlies[/COLOR][/B][/URL]
[url=""][STRIKE]Slim AIO Gapps Download[/STRIKE] (use whatever works for now)[/URL]
Screenshots (Outdated)[/FONT]
Please Support Liquid by Donating HERE
People who made this rom possible: @nvertigo67 Vendor,Kernel,Device trees are all based on his work
All of the devs/testers who helped me with making a common exynos5420 repo.
XDA:DevDB Information
[ROM][5.1.1][OFFICIAL] LiquidSmooth v4.1 | T700/T705/T800/T805, ROM for the Samsung Galaxy Tab S
Contributors
deadman96385
Source Code: http://www.github.com/Liquidsmooth
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Created 2015-04-25
Last Updated 2015-06-20
Bugs:
T705/T805's data does not work
Boot animation isn't sized right
Welcome!
So i just got this tablet a few days ago, so i will be building LiquidSmooth on it as well as making a custom kernel for it once i get some time.
Thanks for this. ??
«Sent from my not-so-stock T700»™
Looks nice ! If anyone could report about the performance (antutu) and the battery life, id consider flashing this
Ugh, tried to flash the 700 on my 705 (never tried this before) but didn't get far.
TWRP 2.8.6.2.
Thank you very much for developing for this device, it's nice to see more variety for the T700.
Thanks a lot for developing new rom for tab s, downloading and will report back about its performance
Looks like I've ran into 3 problems so far.
1. If you try to skip logging into your Gmail account to do it afterwards, Setup Manager FCs and puts you back at the Select Wifi page.
2. I cannot change music with the volume buttons, I've tried this on two different players (Shuttle and Gramaphone.) This has happen to me with roms in their early stages most of the time, so I usually just install the app Pocket Skip Track to workaround the issue until it's fixed. Works just with with the app installed.
3. Theme Manager seems to be unusable, installing icon or themes from the Play Store causes an automatic soft restart, and trying to apply either FCs the Theme Manager.
Other than that I'm loving this (Especially the more tablet like notifications.) I use to use Liquid waaaay back when I had a Droid X, nice to use it again.
EDIT: Added to the list.
CZ Eddie said:
Hi, thanks for joining the Tab S development!
Click to expand...
Click to collapse
Thanks i will work on getting the t705 blobs I can blind build it i guess it just won't get as frequent builds as the wifi variant fyi
Duskye said:
Looks like I've ran into 3 problems so far.
1. If you try to skip logging into your Gmail account to do it afterwards, Setup Manager FCs and puts you back at the Select Wifi page.
2. I cannot change music with the volume buttons, I've tried this on two different players (Shuttle and Gramaphone.) This has happen to me with roms in their early stages most of the time, so I usually just install the app Pocket Skip Track to workaround the issue until it's fixed. Works just with with the app installed.
3. Theme Manager seems to be unusable, installing icon or themes from the Play Store causes an automatic soft restart, and trying to apply either FCs the Theme Manager.
Other than that I'm loving this (Especially the more tablet like notifications.) I use to use Liquid waaaay back when I had a Droid X, nice to use it again.
EDIT: Added to the list.
Click to expand...
Click to collapse
1. Not sure why thats happening i guess i never skip logging into google
2. Yeah we do not have that feature, most of the the team does not use it
3. Being worked on
deadman96385 said:
I doubt it i tend to only build devices I own and or a friend has. It didn't take much to get this building so t800 shouldn't be hard.
Click to expand...
Click to collapse
This means there's some hope for me? if you need tester just say it.thanks
deadman96385 said:
2. Yeah we do not have that feature, most of the the team does not use it
Click to expand...
Click to collapse
Ah, alright. I thought it was a bug as the option to enable it was there, but Pocket Skip Track works just fine.
deadman96385 said:
I doubt it i tend to only build devices I own and or a friend has. It didn't take much to get this building so t800 shouldn't be hard.
Click to expand...
Click to collapse
This are great news!!
m.
Theme provider always fc and can you please change position to bottom, of clear recent button?
My god man, usually I really have a hard time with AOSP ROMs because they either drain so much battery, overheat the device or have lots of fc. But man, this ROM is perfect ! I like how some of the UI size has been tweaked for the tablet screen, the new sound effects are dope ! In terms of performance, everything runs perfectly. I've tried every other aosp ROMs for this tablet and this one is the only one I'm gonna consider as a daily driver ! My tablet is nit running hot and the battery is better than stock at the moment ! And I like the KitKat browser and gallery, makes everything even more smoother ! Give me your donate button, you've earned it mate Can't wait till you fix the theme FC !
Also I've noticed a real performance boost in gaming compared to Stock TW 5.0.2. I had framerate problems on Mortal Kombat X and on your Rom, the game is running at 60fps haha ****ing Touchwiz man
On screen navigation buttons seem to not fit/scale/render properly in landscape mode. Great ROM otherwise. ?
«Sent from my not-so-stock T700»™
Hi thanks for the new rom support much appreciated. Couple of question if you don't mind, is the kernel permissive or enforcing? Is there a unmount feature for the micro sd card? And I know this probabally don't work but worth asking anyways, any fingerprint support? Thanks again!
Thanks boss for this great rom!
It is step up to other cm's- speed is is different like day and night. Device not heating at all, as others say...
I have some issues/ help requests if possible:
- theme engine gives FC and reboot when try to implement some other cm12 theme (will be nice to fix, to use some dark settings battery friendly theme)
- I got fc on any settings in stock browser
again thanks for GREAT PERFORMANCE rom
Is there anyway to get the DARK theme on this ROM. Thank you for this awesome work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/* Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you blame me in any way for what happens to your device, I will laugh at you.
* BOOM! goes the dynamite
*/
About Project:
Citrus-CAF, unlike the name suggests, was initially based off CyanogenMod, in the early days of Marshmallow, we even had another name at that point. Later, taking into consideration feedbacks of the very first slew of testers and carefully studying the needs and demands of our users, we rebased the project to Code Aurora Sources, more commonly known as CAF. Time went by and Nougat released, and we decided that it was time, Citrus-CAF had to see the daylight. We rebased everything to the brank spanking Nougat released. Later we realized the true potential of CAF tags, how each of them altered the device performance on different SOCs. After a lot of thinking, we decided to keep different sources for difference SOCs in our git and hours of debugging later, the Xiaomi Redmi Note 3 was the first device to get a taste of our Tangy Nougat. In the beginning, it was just two people behind , but in time, a lot of people joined us, as each giving their own contibutions.
Citrus-CAF was built to create an amazing combination of customization, performance and most of the demanded features by our users, whereas we've Cardinal, to deliver minimal customizations, but the greatest stability!
Meanwhile, all of our Tangy sources are publicly available on our Github. We also do own a Google+ Community, where you can.... uhm... you know, do what all others do at forums and communities! (Just kidding, we got builds over there and a feature-wish bucket too ) Hope you enjoy your stay and taste the Tanginess of our work!
Out of lemon, with love!
NOTE: There's nothing like, "we've decided to keep the customizations minimum, so as to provide stock AOSP experience, but with necessary features", cause this isn't Cardinal. This is Citrus
**Custom Squash**
*QS and Status Bar tweaks*
- Battery percentage
- Battery Styles [Including AOSPA Style]
- Charging Symbol Near Charging Percentage [Flash Logo etc]
- Show AM/PM toggle
- Time alignment
- Battery LED (shows only if device supports)
- Lights with screen on (only if device supports)
- Play music QS,NFC,Reboot and many extra tile
- Moved SystemUI to Custom Squash
- Quick Setting Customizations[Toggle for QS Tile Titles ,Control number of columns and rows,upto 8 QS Tiles]
- Carrier label
- Network traffic
- Power Notification controls [By Default]
- Enable/Disable logo on Status Bar
- Ticker Style [KK Style Notifications]
- Display Bluetooth battery status
- Advanced Data, Bt, WiFi qs toggle
- notification counter toggle
- USB tether tile
- QS Header image
- Battery bar customisations
*UI Tweaks*
- Expanded Desktop
- Wake on Plug Toggle
- less notification sound
- Incresing ring
- Custom logos
- Unlink notification and ringer volume
- Qs Quick pull-down
- Enabled night light
- option to disable safe headsets
volume
- Screen Color Controls
- Screenshot Type Toggle
- Custom Squash Summary Text
- System App Remover
- Google Assistant included by default [Needs Gapps ]
*Buttons*
- DUI -Fling & Pulse
- Navigation Smart Bar controls
- Full Hardware key custom rebinding
- Disable HW Buttons and Backlight (Control Backlight as well)
- Volume Rocker Wake
- Volume keys Music Playback control
- Volume up for DND
- Volume Down to exit DND
- Show/Hide DND switch on volume panel
- Enable multiwindow swipe up gesture
*Lock Screen*
- Lockscreen visualizer toggle
- Double tap to sleep on lockscreen
- Lockscreen media art toggle
- Lockscreen Items
- Lockscreen Charging Info
- FP Unlock at start
- Lockscreen torch
- Enable/Disable haptic feedback for successful finger print authentication
*Misc*
- Toast Icon
- Custom Summary
- Clear All Fab
- Memory Bar at recents
- One Handed Mode
*Substratum*
- Full substratum support
DOWNLOAD
Citrus-CAF
Beans GApps
Open GApps
Flashing Instructions
- Download ROM and GApps
- Reboot to recovery and backup existing ROM
- Wipe System, Data, Dalvik-Cache, Cache
- Flash ROM, GApps and reboot
Credits
Team Cardinal
CyanogenMod
Substratum
PureNexusProject
DirtyUnicorns
AOSP-RRO
AOSParadox
ASOPA
Extreme apologies if we've missed out someone, please feel free to PM, in case we've forgotten to pin your name here!
Our Google+ Community: https://plus.google.com/communities/110928715574226998482
Our Telegram Channel:https://telegram.me/TheCitrusChannel
Our Telegram Group: https://t.me/CitrusCAF
XDA:DevDB Information
CitrusCAF, ROM for the Xiaomi Mi 3
Contributors
travarilo
Source Code: https://github.com/Citrus-CAF
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Created 2017-07-21
Last Updated 2017-10-29
Dowloading
Sent from my MI 4LTE using Tapatalk
You did it. Fantastic, downloading right now. Many thanks.
Sent from my MI 4W using XDA-Developers Legacy app
Hey guys, here a very fire feedback before I fall asleep. The first impression is more than amazing. No problems occurred, everything is working fine. Initially I have flashed Magisk 13.3 and microG instead gapps. In order to perform signature spoofing, further I have flashed the NanoMod Patcher. And Magisk is working fine including SafetyNet and the MicroG as well. I am so ?. Tomorrow I will flash ARISE Magnum Opus and restore my apps. It's like Xmas for me (in July . Done an excellent job @travarilo
Sent from my MI 4 using XDA-Developers Legacy app
can't activate developer options, is there anyone got the same?
ar157 said:
can't activate developer options, is there anyone got the same?
Click to expand...
Click to collapse
Liket this?
Need to try this
Tomorow maybe @travarilo
travarilo said:
Liket this?
Click to expand...
Click to collapse
have tried clicking build number thousand times
just wanna change (i forgot what it call but absolutely you knew it) from 1.0 to 0.75 :laugh: :laugh:
not a big deal this rom completely awesome :good:
ar157 said:
have tried clicking build number thousand times
just wanna change (i forgot what it call but absolutely you knew it) from 1.0 to 0.75[emoji23]:laugh:
not a big deal this rom completely awesome :good:
Click to expand...
Click to collapse
Have you installed something special? On my device after the 1st reboot the developer options were present automatically, but later they simply disappeared and I can't active them from About Phone as well.
Sent from my MI 4 using XDA-Developers Legacy app
travarilo said:
Liket this?
Click to expand...
Click to collapse
Hey Buddy,
I installed this ROM too and honestly, It is super amazing.
Was not sure initially since it was the first build. But I trusted your name and went for it.
But yes, I cannot see the Developer options too. @ydd0ras
Tapping build number countless times does nothing. I do not miss those settings though.
Maybe next build we'll see the fix.
Not sure how it is visible on your end?
BTW I LOUVE your theme and Font.
Theme I know, it is Mono-Art by Dejan Baric. I am using Belo currently.
I wish to know which font are you using? It looks slick.
eddy_nugroz said:
Need to try this
Tomorow maybe @travarilo
Click to expand...
Click to collapse
Don't do that mate, please... Lol
ar157 said:
have tried clicking build number thousand times
just wanna change (i forgot what it call but absolutely you knew it) from 1.0 to 0.75 :laugh: :laugh:
not a big deal this rom completely awesome :good:
Click to expand...
Click to collapse
ydd0ras said:
Have you installed something special? On my device after the 1st reboot the developer options were present automatically, but later they simply disappeared and I can't active them from About Phone as well.
Click to expand...
Click to collapse
HannibalLecter said:
Hey Buddy,
I installed this ROM too and honestly, It is super amazing.
Was not sure initially since it was the first build. But I trusted your name and went for it.
But yes, I cannot see the Developer options too. @ydd0ras
Tapping build number countless times does nothing. I do not miss those settings though.
Maybe next build we'll see the fix.
Not sure how it is visible on your end?
BTW I LOUVE your theme and Font.
Theme I know, it is Mono-Art by Dejan Baric. I am using Belo currently.
I wish to know which font are you using? It looks slick.
Click to expand...
Click to collapse
I am so curious guys, I have been used it for a day full but Developer Options is still there.. :silly:
It is Scifly on SubFont substratum..
travarilo said:
I am so curious guys, I have been used it for a day full but Developer Options is still there.. :silly:
It is Scifly on SubFont substratum..
Click to expand...
Click to collapse
nope not there fr me. magisk broke it or wot?
no mods ecept magisk 13.3
HannibalLecter said:
nope not there fr me. magisk broke it or wot?
no mods ecept magisk 13.3
Click to expand...
Click to collapse
It can be, because I am using SuperSU instead of magisk..
Now I have tested the ROM nearly 24h, and I must say I am amazed. Everything except the developer options is working flawlessly. From Arise until Yalp Store. All my favourite sound mods, Magisk and the no-gapps solution are doing a pretty good job. Thumbs up. @travarilo believe me I don't want to bother you, but the same one on my OPO...a dream? Until then will primarily use my cancro.
Sent from my MI 4 using XDA-Developers Legacy app
ydd0ras said:
Now I have tested the ROM nearly 24h, and I must say I am amazed. Everything except the developer options is working flawlessly. From Arise until Yalp Store. All my favourite sound mods, Magisk and the no-gapps solution are doing a pretty good job. Thumbs up. @travarilo believe me I don't want to bother you, but the same one on my OPO...a dream? Until then will primarily use my cancro.
Click to expand...
Click to collapse
How is camera quality?
sinz0000 said:
How is camera quality?
Click to expand...
Click to collapse
I have made just a few random pics, not tested the camera really. Will check it tomorrow. Look here:
Sent from my MI 4 using XDA-Developers Legacy app
Just encountered a problem. Was at 67% battery before sleeping around 11. Woke up to 0% phone NOT powering ON.
HannibalLecter said:
Just encountered a problem. Was at 67% battery before sleeping around 11. Woke up to 0% phone NOT powering ON.
Click to expand...
Click to collapse
Happens occasionally on any ROM if the system fails to enter doze mode due to a rogue app/android process continuously utilizing system resources. A simple reboot would often fix the issue. If it happens regularly, you should consider taking a betterbatterystats log and investigating further. There is a whole forum on XDA dedicated to minimizing idle battery loss.
Everything's fine here, no drops, but very good battery life.
Sent from my MI 4 using XDA-Developers Legacy app
hi @travarilo,
thanks for this great rom, I'm using it and so far everything is smooth and fast!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First huge thanks for @33bca for helping me with building Paranoid Android for Mi5s Plus
We’re really excited to announce that we are releasing our Nougat flavour of Paranoid Android. We have a lot in store - with a mix of both features & improvements.
First & foremost, we have moved our code base to be fully CAF based. This brings many improvements to your device. The key improvement here is that Qualcomm hardware is better tuned on the CAF base and with our additional optimizations we can provide a smooth and fluid user experience that will let you enjoy using your device without any lags.
On first launch you’ll notice a clean setup with a beautiful wallpaper from Hampus Olsson who’s teamed up with us again and created several beautiful pieces of artwork. For those of you who don’t know, Hampus is a multi-disciplinary artist whose work stands itself and we’re glad to have him onboard. We have also added several new features and made improvements to the UI of the system that we believe would enhance the overall experience.
Pie
We’ve been working hard on redesigning this key feature of our portfolio and we’re really happy with how it has turned out. The whole design has been reworked and it fits in well with the overall feel of Google’s Material Design. This gives you the opportunity to use more gesture based control for navigating, rather than using the standard Navigation Bar at the bottom of your screen. Expect improvements and additions in the future.
Color Engine
We’re proud to announce our newest feature - Color Engine. Color Engine allows you to seamlessly change the colors of your device to be in Light, Dark (Pixel) and Black modes with a variety of accent colors to choose from. This makes changing the theme of your device really quick without having to install any extra packages on your device.
Pocket Lock
This feature prevents any form of accidental input when your device is in your pocket by disabling input sources. You can simply release Pocket Lock by long pressing the power button as highlighted by the minimal UI incase of any sort of obstruction or dust on the sensors.
Accidental Touch
Accidental Touch is a feature useful for many, especially the gamers out there. It prevents any sort of accidental touch on hardware buttons while the touchscreen is in use. This means you won’t experience any unexpected behaviour while playing games, web browsing or even when attempting to reach your finger out to the edge of that humongous display.
Major features:
- Reworked Pie
- Color engine
- Pocket lock
- Immersive mode
- Buttons customization (including navigation bar)
- On the spot controls (OTS)
Minor features:
- SafetyNet Compatibility
- Battery/Notification LED control
- Recent tasks locking
- Battery icon customization
- Google now page in default launcher
- Accidental touch
- Three finger swipe Screenshot
- Substratum (OMS) support (Color engine will be deactivated if you use Substratum)
- Quick pulldown
- Various performance and battery improvements
- Display Burn-in protection (for OLED screens)
- More to explore
Download
Get latest Xiaomi Mi5s Plus build here.
Changelogs
16.11.2017
- Add KCAL support
- Add schedulers : zen fiops sio fifo sioplus tripndroid vr
- Default io scheduler is now zen for improve battery
- Some other not important changes in kernel
08.11.2017
Huge thanks for @33bca for reworked sources and for fixing all known bugs
AOSPA changes ( 7.3.1 )
- Fix compatibility issues with third-party camera apps
- KRACK Vulnerability patches
- Various improvements to Wi-Fi and Bluetooth connectivity
- Performance and efficiency improvements for Pocket Lock
- Launcher improvements and fixes
- Various performance and battery improvements
- Other minor improvements and fixes
- Final update for translations
07.10.2017
AOSPA changes ( 7.3.0 )
- New Launcher features, customizations and improvements
- Experimental support for simultaneous use of Color Engine and Substratum
- New security patches (September 2017)
- Various performance improvements
- Various stability fixes and minor improvements
- Fixed GPS issues with Waze and other apps
- Fixed Trusted Face
- Fixed possible Immersive Mode force close
- Fixed Bluetooth connectivity issues
- Fixed various theming issues
- Fixed data integrity issues
- Fixed multiple frameworks resource and memory leaks
My changes
- Various performance improvements
- Removed ANT+ support ( we don`t need that )
- Enable Fastdormancy ( benefits for power )
14.09.2017
- add QPerformance to improve latency for the userspace boosting framework.
- Reworked CPU scroller boost
- Reworked CPU boost for app launch
- Removed sched boost from scroller boost and app launch boost due to high power consumption
- Battery drain minimalized
- Some not important changes in common device tree
10.09.2017
- Add cpu scroller boost for improve scrolling
- Add cpu boost for app launch for improve performance
- Reworked common device tree
01.09.2017
- Rebuild with aospa kernel
- Some not important changes in device tree
30.08.2017
- Audio fixed
29.08.2017
- First release
Instructions & requirements
Check this seperate post here
Important / Useful links
OpenGapps
SuperSU root package
Magisk root package
Paranoid Android Community (G+)
Our kernel source (Mi5s Plus)
Device tree for Paranoid Android (Mi5s Plus)
Common device tree for Paranoid Android (Mi5s Plus)
As always, we listen to what you have to say. Help us make PA better by submitting good bug reports possibly with a log attached. Learn how to take logs here. Submit bug reports and we'll try to iron out issues as soon as possible - it really helps a lot.
Our device maintainers and CAF caretakers @33bca @TheCrazyLex, @xboxfanj, @arter97, @ChrisLahaye @Thecrazyskull are right here at xda. Mention (@) them if you need some assistance and/or when reporting bugs.
Cheers and #StayParanoid!
XDA:DevDB Information
[UNOFFICIAL][CAF] Paranoid Android 7.3.1 - AOSPA - Mi5s Plus [WEEKLY], ROM for the Xiaomi Mi 5s Plus
Contributors
00day, 33bca
Source Code: https://github.com/AOSPA
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Version Information
Status: Testing
Current Stable Version: 7.3.1
Created 2017-08-29
Last Updated 2017-11-16
I was waiting for Paranoid Android since I bought this device. Thank you so much for it.
reserved
Install instructions
We highly recommend you to follow these instructions very carefully. Users usually tend to skip a few steps and eventually fall in trouble. Are you with me? Good. Let's get this train going.
Just a few things to keep in mind first -
If you're coming from another ROM / Stock, your system data (not internal storage) will have to be wiped. This includes apps, accounts, messages, call logs etc.
There's been some users complaining about different GAPPS variants messing up installs and causing a ton of issues. Upon investigating it seems OpenGapps Mini/Nano work best.
Understand that Paranoid Android is a custom ROM and it might lead to addiction as it's relatively good. We shouldn't be accused of anything just incase your cat starts drinking wine. Things get a little woozy in the Paranoid World.
Some brain might be involved if things go wrong. Not a lot though, as much to solve what's 1+1.
Okay let's get to the main bit.
We recommend a full wipe.
Flashing order:
1. Back up to PC everything you would need (whole of Internal Storage including and not limited to
Titanium Backup folder, Music, Pictures, etc)
2. Flash TWRP
3. Format all partitions except the "internal" partition**
4. Flash Firmware zip
5. Flash AOSPA zip
6. Flash Gapps zip
7. Flash Magisk or SuperSu (optional)**
8. Reboot System
** SuperSu 2.79 and earlier is confirmed to fail. 2.82 is tested and confirmed to be working.
First boot time would be about 3-4 minutes on an average.
In case you are encrypted, read on:
9. If you were already encrypted, it asks for a password (pattern or pin), provide and if it goes
through, great and go back to Step 5
10. If you’re stuck, ONLY then read on…
a. If in case TWRP doesn’t accept your password and says ‘Can’t Mount Storage’, you will
have to use FASTBOOT from a PC to go further from here.
b. Assuming you have FASTBOOT working and it recognizes your device, the following need
to be done:
1. fastboot format userdata
2. fastboot format cache
3. fastboot format system
4. fastboot erase boot
5. fastboot reboot
7. Reboot phone into Recovery
8. In TWRP, Wipe – Format Data.
9. Install from Step 5 onwards.
Introduction by @arzbhatia
Instructions by @thechints
reserved #2
Do not work neither the notifications nor the ringtone besides faults in the camera evidently if sounds is not functional I had to uninstall but thank you for starting work with this great ROM
I was waiting for Paranoid Android since I bought this device. Thank you so much for it.
Audio is now working properly
00day said:
Audio is now working properly
Click to expand...
Click to collapse
Thanks!!!!, I'll give it a candle.
Could you help to upload the rom to AndroidFileHost.? Cause it's really hard for me to download from Google Drive.
Could you please port this to mi5s. We really want to try AOSPA. Thaaaanks!
Nice rom, thanks for it. But is it possible to bring in this rom some features like changing power of light to navigation hardware buttons and one-hand mode? This very useful features are in Lineage OS.
I would really love to try it. Is there anyone who installed it and can help us with some screenshots or even better a screenrecord? Thanks!
What's the difference between CAF and LineageOS? I'm talking about the core system, not the UI and other added tweaks.
xhoi said:
I would really love to try it. Is there anyone who installed it and can help us with some screenshots or even better a screenrecord? Thanks!
Click to expand...
Click to collapse
May this can help you.
justin_hill said:
May this can help you.
Click to expand...
Click to collapse
Is that Nova launcher?
udaan said:
Is that Nova launcher?
Click to expand...
Click to collapse
Yes, sorry for not uploading the picture with default launcher.
Next release,
changelog in op
QuiseShampe said:
Nice rom, thanks for it. But is it possible to bring in this rom some features like changing power of light to navigation hardware buttons and one-hand mode? This very useful features are in Lineage OS.
Click to expand...
Click to collapse
i`m still working on navigation hardware buttons but for one-hand mode you must ask Paranoid Android official developers
00day said:
Next release,
changelog in op
Click to expand...
Click to collapse
Can you update the kernel link? It's still LineageOS one.
Sent from my Xiaomi MI 5s Plus using XDA Labs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Redmi 5 Plus [vince]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential features for the proper functioning of the device
Based on Android 9.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Lights
Sound / vibration
Facelock
Known issues
Nothing
DON'T FLASH GAPPS, ALREADY INCLUDED
Download Link Last Build
REMOVED
XDA:DevDB Information
Pixel Experience GO, ROM for the Xiaomi Redmi Note 5 / 5 Plus
Contributors
hussein1, waiser 4PDA, LROM.RU
Source Code: https://github.com/PixelExperience
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.1.x
ROM Firmware Required: MIUI 10
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: Pixel Experience GO
Stable Release Date: 2018-11-09
Created 2018-11-10
Last Updated 2018-11-10
Changlog:
11/10/2018
1) Return of the access point
09/11/2018
1) update source
2) The DOZE and Ambient display function has been reworked (translation management RU, en has been added)
3) Many minor edits for unused functions in the code (for rendering and etc.)
4) Fixed face
5) Fixed video in WhatsApp
6) Added AR core (test )
7) Added used WIFI frequencies (Video transfer test to display)
8) Minor edits, I don’t remember which ones.
6/11/2018
1) update source to r_16
2) patch November Security
3) Weather on Lock screen
4) Music nearby
5) Many minor edits according to the sources, the conductor stopped flying.
4/11/2018
1) Updated source
2) Updated Chart
3) Updated vendor
4) Small changes to optimize
10/29/2018
1) The source codes were updated
2) Updated core
3) Work Auto Focus (thanks to LROM)
4) GCam on runoff (version 5)
5) Removed friezes with animation 1.0 (on desktops) (Thanks to LROM)
6) Now the correct address is Bluetooth
7) GPS works (Thanks to LROM )
8) Audio codecs Dirac (Thank LROM)
9) Small optimization system
Awesome to see a GO pie rom, does this rom contains all go apps? please confirm.
ecrudragon said:
Awesome to see a GO pie rom, does this rom contains all go apps? please confirm.
Click to expand...
Click to collapse
This ROM is not Android GO
firmware will have a prefix (-GO-) from this day, so as not to be confused with our foreign colleagues.
@hussein1 : What about Bluetooth vs. WI-FI download speed issue (download speed very slow when bluetooth connected).. Is it still there, Please?
hussein1 said:
This ROM is not Android GO
firmware will have a prefix (-GO-) from this day, so as not to be confused with our foreign colleagues.
Click to expand...
Click to collapse
You need to add that to the first page. So, user will know why and what the differences.
hussein1 said:
This ROM is not Android GO
firmware will have a prefix (-GO-) from this day, so as not to be confused with our foreign colleagues.
Click to expand...
Click to collapse
That's just sad to even begin with.
Ok what about some screenshots ??
this pe go is pure love..
sweezit92 said:
this pe go is pure love..
Click to expand...
Click to collapse
New Build is up:good:
Changes:
11/10/2018
1) Return of the access point
I would rather see just one Pixel Experience, but unfortunatly LuizH007's (@SanicM2) developement is not as advanced as Waiser's (I'm not talking about capability, I mean bugs in the ROM). Of course, maybe LuizH007 doesn't have the same time to dedicate anymore.
Actually, there are three Pixel Experience ROMs, but Waiser's and LuizH007's ROMs have the same goal. So, it would be great to see both working together instead of this separated developments.
By the way, Waiser's version is the less buggy one.
Furthermore, thank you @hussein1 for opening a new thread about Pixel Experience GO.
hussein1 said:
New Build is up:good:
Changes:
11/10/2018
1) Return of the access point
Click to expand...
Click to collapse
INSTALLED....?????
---------- Post added at 09:06 PM ---------- Previous post was at 09:03 PM ----------
I am a professional web developer if you want to build an official go rom website feel free to contact me brother...love from INDIA..
so, any thoughts, comments, pro and cons?
I'm using this build for a long time day by day, not the "original", but I think it's better. The updates come faster, always fixing any small issue. And overall feels a bit faster than the other PE release. And I don't need a lot of customisation like in the PE Extended or other roms, so I'm happy with this build and stay with this
But I don't want to say which version you are using, test it and choose.
OK, I downloaded the rom in OP post, which seem to NOT be the last version.
9/11/18 version in the op.
As soon as I installed the rom, in first boot(no problems by the way, 4 minutes to boot)
a ''new update available'' pops up, suggesting to download.
Another 1.05 Gb to download and start over
WHY?
danilorze said:
I would rather see just one Pixel Experience, but unfortunatly LuizH007's (@SanicM2) developement is not as advanced as Waiser's (I'm not talking about capability, I mean bugs in the ROM). Of course, maybe LuizH007 doesn't have the same time to dedicate anymore.
Actually, there are three Pixel Experience ROMs, but Waiser's and LuizH007's ROMs have the same goal. So, it would be great to see both working together instead of this separated developments.
By the way, Waiser's version is the less buggy one.
Furthermore, thank you @hussein1 for opening a new thread about Pixel Experience GO.
Click to expand...
Click to collapse
Now tell me, what bugs mine latest version have? Lmao
Bugs
LuizH007 said:
Now tell me, what bugs mine latest version have? Lmao
Click to expand...
Click to collapse
In your thread, people talk about:
1. Instable autofocus (or refocus - it seems to had been solved reinstalling the GCam);
2. VoLTE not working;
3. Charging LED not working;
4. Automatic brightness always high;
5. Cast Screen not working;
6. Settings app crashes after opening IMEI menu;
7. It's no possible to set SIM 2 in mobile data;
8. Saturated colorson some screens;
9. Only one flashlight working;
10. Wi-fi turns off after DOZE activation.
I haven't installed your ROM because of this complainments, afterall, all of this works great in Waiser's build. Nonetheless, I apreciate your work too.
danilorze said:
In your thread, people talk about:
1. Instable autofocus (or refocus - it seems to had been solved reinstalling the GCam);
2. VoLTE not working;
3. Charging LED not working;
4. Automatic brightness always high;
5. Cast Screen not working;
6. Settings app crashes after opening IMEI menu;
7. It's no possible to set SIM 2 in mobile data;
8. Saturated colorson some screens;
9. Only one flashlight working;
10. Wi-fi turns off after DOZE activation.
I haven't installed your ROM because of this complainments, afterall, all of this works great in Waiser's build. Nonetheless, I apreciate your work too.
Click to expand...
Click to collapse
Well, You're free to use whatever you want, but all those listed bugs have been fixed except the focus of the camera ... Anyway, waiser is a very good developer, for sure PE Go is awesome
LuizH007 said:
Now tell me, what bugs mine latest version have? Lmao
Click to expand...
Click to collapse
Waiser's build update daily, weekly. Fix bug very fast. When I used your build, I had waited one month to fix led notification. I dont like that. By the way, thanks for your work.
Am I the only one experiencing very slow fingerprint unlock? It takes a lot for my device to wake from sleep, actually also double tap to wake is slow :/
Also Pixel live wallpapers are very laggy
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
"This is a user-friendly thread, all your suggestions, and proper bug reports are important to us but don't be disrespectful to anyone here. Your suggestions and proper bug reports will be taken into consideration.."
Project Elixir is another aftermarket AOSP ROM which basically offers minimal UI enhancement & close to Stock Android ROM with great performance, security and stability. Most of the OEMs' these days will provide slow and untimely updates, but we don't do that here. We closely follow Google to bring the latest updates to our users, and even prolong support for devices that have been declared obsolete by OEMs. Our ROMs' source code is open-source, secure, stable, and outstanding. Your experience while using Project Elixir will be butter smooth without compromising the quality of the Android experience. In short, it's perfectly balanced between Great Performance, Security, stability, minimal UI & awesome features including pixel goodies So do not hesitate anymore, join us now and start enjoying the beauty of stock Android. Download and enjoy Project Elixir on your respective devices!
- Saurav - Founder & lead Developer
- Probir - Developer / Team
- Prabh - Developer / Team
- Hamza - Team / UI Developer
- Yasin - Moderator / Support Team
- Abhishek (Lop) - Support Team
- EXON - Graphic designer
- And Also Our Hardworking Maintainers
NOTE: As we keep updating source so its hard to keep threads updated everytime everywhere so kindly visit our website for latest changes and screenshots.
// Features of Initial Android 12 Build and will be updated on every release //
Code:
STATUSBAR
- 4G Icon Instead of LTE.
- Added battery icon customisation
- Added statusbar clock & date customisation
- VoLTE icon toggle.
- Volte and Vowifi icon picker
Navigation Bar
- System navigation
QUICK SETTINGS
- Vibrate on touch.
GESTURES
- Double tap to sleep on statusbar
- Double tap to sleep on lockscreen
- Extended swipe gesture.
- Quick open camera.
- One handed mode.
- Power button press and hold gesture.
- Power button torch gesture.
- Screen off power button torch.
- Three finger swipe screenshot.
BUTTONS
- Skip music tracks.
- Volume rocker wake.
NOTIFICATIONS
- Incall Vibrations.
- Add switch for linked ring and media notification volumes
- Allow to suppress notifications sound/vibration if screen is ON
- Added Lockscreen Charging info
- Add option to enable AOD on charging only
POWER MENU
- Advanced Reboot.
- Power menu items.
SEURITY
- Add option to scramble pin layout when unlocking
- Introduce pocket lock mode
MISC
- Pure Pixel Goodies
- Monet Theme (Wallpaper based accent)
- Themed Icons
- Add capability to allow tethering to use VPN
- Enabled charging ripple effect
- Bluetooth battery level when available
- Allow user to add/remove QS with one click
Lots more to coming soon !
Stay Tuned!!
// Checkout every changelog since the first release//
---------- Official Download Server! ----------
NOTE: Please keep in mind that these are Gapps Builds and there is no vanilla build of this rom available.
---------- Visit Our Official Website----------
------ Tap Here for Screenshots ------
NOTE: It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine. If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
CLEAN FLASH (Moving From A11 to A12)
- Download the latest build
- Take a backup for safe side
- Boot to Recovery
- Format Data by typing yes
- Flash the latest build
- Reboot
What works?
Wifi | RIL | Mobile data | GPS | Camera
Flashlight | Camcorder | Bluetooth | Fingerprint reader | Lights | Sound | vibration
And More
What doesn't work? or Any Bug ?
You tell me!
BUG REPORT !!
As soon as the problem occurs, take a logcat and please inform us via Telegram or XDA.
for more READ THIS
- Android Open-Source Project
- Pixel Experience
- LineageOS
- Proton AOSP
- Arrow OS
- Others, I may have forgot to mention
- Android OS version: 12.1
- Security patch: July 2022
- Build author/Device Maintainer : @AndroidHQ254
- DEVICE: Xiaomi Mi Note 10 Lite
- DEVICE CODENAME: toco
---- Sources and Documentation ----
- ROM Source Code
- Kernel Source
- OFFICIAL DEVICES
- Documentation
-- OFFICIAL Website and Telegram Support Groups --
-- Visit our OFFICIAL Website
-- DEVICE UPDATE TELEGRAM CHANNEL --
-- SUPPORT/DISCUSSION TELEGRAM GROUP --
As you know build is free but building ROM needs a server. And Maintaining source and device stuff needs a server and it's pretty expensive for a student. It will be really helpful and appreciated if you donate or contribute to us. Also if you have any queries related to donation you can freely message -> Saurav (Founder & lead Dev)
PAYTM UPI ID : [email protected]
GPAY UPI ID: [email protected]
PAYPAL: https://www.paypal.me/uglykid24
Reserved
Reserved
Download link updated!
Does it support fast charge?
how is the battery life?
can i install miui camera?
Can I play the sounds of the applications separately?
Can apps run in small window?
Does the fingerprint reader work stably?
Is the system fast?
Does it support fast charge?
how is the battery life?
can i install miui camera?
Can I play the sounds of the applications separately?
Can apps run in small window?
Does the fingerprint reader work stably?
Is the system fast?
zackking said:
Does it support fast charge?
how is the battery life?
can i install miui camera?
Can I play the sounds of the applications separately?
Can apps run in small window?
Does the fingerprint reader work stably?
Is the system fast?
Click to expand...
Click to collapse
We do not have MIUI camera... That is found in MIUI
Edit: ANXCamera is now included in the rom
Rom is awesome, manages battery really well, everything works fast & smooth including fod. Only problem is some games aren't compatible, that's what play store says. Downloading apk doesn't help. Please fix if possible. Overall well done .
Best regards
yesterdays update fixed problem
thanks
Absolutely nothing said:
Rom is awesome, manages battery really well, everything works fast & smooth including fod. Only problem is some games aren't compatible, that's what play store says. Downloading apk doesn't help. Please fix if possible. Overall well done .
Best regards
Click to expand...
Click to collapse
Google assistant don't seem to be accessible through voice("Hey Google", "Okay Google"), can't use it with headset as well. There's no problem with voice input, after i manually press the microphone. Before Last update assistant worked as it's supposed to be working.
June SPL available!
Project Elixir v1.9 OFFICIAL Update | Android 12.1
Source Side Changelog :
https://projectelixiros.com/changelog
Download:
https://downloads.projectelixiros.com/
Reporting bugs without proper logs will be considered as a feature : )
For Screenshot:
Visit: https://projectelixiros.com/gallery
Important Notes :
• Selinux is Enforcing, encryption, CTS passes and banking apps working
• No need to flash gapps (included)
• If you are moving from ANDROID 11 to ANDROID 12 Clean Flash (Format Data) Is COMPULSORY to avoid bugs.
// If you like our work then do donate us for server //
UPI ID: [email protected] (Indian Users)
Paypal: https://www.paypal.me/uglykid24
might sound stupid, but what if i flash update without formating data?
last update again broke google assistant for headphones, "hey Google" is working just fine.
Does 64MP and high FPS video work in the included ANX Camera?
about anx camera
64MP is working
slow motion does not work time lapse does
documents scan doesn't work
pro is working just fine as well as portrait and video
if you take picture wih 2X zoom, post proccessing is going to make it either totally blue or red. same for GCam.
@AndroidHQ254 Hi... I flashed this ROM using TWRP recovery on my Mi Note 10 lite yesterday and I love it. The ROM is extremely beautiful and fast. But, there are issues that I have noticed.
1. Camera is working but taking 2 or more photos crashes the camera. sometimes after taking one photo the camera takes to the launcher's homescreen.
2. Charging is extremely slow. Mi Note 10 lite has fast charging support of 30W, but this ROM is only charging the phone at 6W-8W. is there any fix to it?
3. I was using Instagram. the video's thumbnails show the right colours but when playing the video it shifts the colour to bluish/greenish shades. This issue is not present in Facebook or Youtube apps.
@AndroidHQ254 Hi. How can i update the v1.9 to v2.1 ROM without flashing it again on my phone?
PS: No updates are shown in the System update section but v2.1 is already out.
DejayAdeel said:
@AndroidHQ254 Hi. How can i update the v1.9 to v2.1 ROM without flashing it again on my phone?
PS: No updates are shown in the System update section but v2.1 is already out.
Click to expand...
Click to collapse
Sorry posted in the wrong thread
To all those having issues with Bootloop or encrypted device - UPDATE to OrangeFOX 12 latest for toco. fixed everything and i had massive issues. update roms no problem and decryption.
BTW this is my fav rom!