[RECOVERY][UNOFFICIAL]TWRP 3.4.0-0 Touch Recovery [m30lte] - Samsung Galaxy M30 ROMs, Kernels, Recoveries, & Ot

[RECOVERY][UNOFFICIAL]TWRP 3.4.0-0 Touch Recovery [m30lte] - Samsung Galaxy M30 ROMs, Kernels, Recoveries, & Ot

Changelog:
Build 2019-06-23
Updated on latest omni sources
Fix notch cutout overlay
Build 2020-06-27
Synced with latest TWRP sources
Updated kernel image with SM-M305F_SWA_QQ_Opensource
Build 2020-06-29
Fixed MTP
Sync ramdisk with stock Android 10
Join our new Telegram community
[OLD]Video guide: https://www.youtube.com/watch?v=NIUhuEc5WVA&feature=youtu.be

--- blank two ---

Sahil_Sonar said:
Edit: I did flash it via ODIN said "sucess" but still goes to stock recovery will surely fix up!
Edit 2: I am currently testing v1.1 will be up soon! Stay tuned (Yea... those links deleted don't want to keep users trying it because that just doesn't work!)
Click to expand...
Click to collapse
nice, i just bought it, I can test new versions if you want.
maybe we need to apply those "dm-verity" stuff right after flashing recovery for twrp to stick after boot?

thalesbraga said:
nice, i just bought it, I can test new versions if you want.
maybe we need to apply those "dm-verity" stuff right after flashing recovery for twrp to stick after boot?
Click to expand...
Click to collapse
I can help too , i flashed it but still boots to stock recovery and i have the dm verity thingy ,tried installig a zip to bypass it ,didnt work ,let me know if you have any new versions you need to test

You tested that on pie updataed M30 bro

StarkTonyXUV said:
You tested that on pie updataed M30 bro
Click to expand...
Click to collapse
No ,on a 8.1 one , i cant update it because the phone detected that i tried to flash it

???

pankspoo said:
Can some one tell me is it genuine?
http://www.droidthunder.com/root-samsung-galaxy-m30/
Click to expand...
Click to collapse
I am working on it there is no reason of being non geninue :good:

Sahil_Sonar said:
I am working on it there is no reason of being non geninue :good:
Click to expand...
Click to collapse
Genuine means its working or not?

pankspoo said:
Genuine means its working or not?
Click to expand...
Click to collapse
Tried installing TWRP ...unable to boot in to recovery mode

Sahil_Sonar said:
TWRP is an open source, community project. A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom “ROM” like LineageOS or OmniROM.
Note: This recovery is un-tested I cannot assure if works or not. Please proceed at your own. I am not responsible for any damage caused to your device nor xda-developers. If you are unaware how stuffs work please search on google:fingers-crossed:
Downloads
TWRP - View
ODIN Tool - View
Device tree - View(Coming soon! :victory
Installation
Unlock bootloader (Hint: Developer options OEM Unlock :angel: )
Turn off your device and go to download mode, connect via USB to PC(Hint: adb reboot bootloader)
Kick ODIN and flash the recovery
Boot into TWRP and format data (or else face encryption issues)
You are good to go! :laugh:
XDA:DevDB Information
TeamWin Recovery, Tool/Utility for the Samsung Galaxy M30
Contributors
Sahil_Sonar
Version Information
Status: Testing
Current Beta Version: v0.1
Beta Release Date: 2019-05-19
Created 2019-05-19
Last Updated 2019-05-19
Click to expand...
Click to collapse
I dont know how to reply cuz a lot of things are complicated in this site ,but when will it be ready ?

Well it's ready! Download links will be available in a short time!

more147 said:
Tried installing TWRP ...unable to boot in to recovery mode
Click to expand...
Click to collapse
Because RRM Lock is enabled please check op and download latest files! I have sucessfully booted and flashed AOSP GSI on my phone

pankspoo said:
Genuine means its working or not?
Click to expand...
Click to collapse
Yep it is!

Nonneed to type commands to unlock oem.
Like fastboot oem unlock before doing everything. Just enabling oem umlock in developer option works??

pankspoo said:
Nonneed to type commands to unlock oem.
Like fastboot oem unlock before doing everything. Just enabling oem umlock in developer option works??
Click to expand...
Click to collapse
No need Samsung bootloader are easy to unlock just make sure it isn't RMM locked. However it will simply wipe your data so make sure you have a backup

---------- Post added at 09:12 AM ---------- Previous post was at 09:09 AM ----------
[/COLOR]
Sahil_Sonar said:
Well it's ready! Download links will be available in a short time!
Click to expand...
Click to collapse
i tried posting a reply multiple times but couldnt for some reason ...
anyway , i got an md5 error , binary invalid , removed md5. from the file's name , odin says its a success but my phone is stuck on the loading bar under downloading word , note : i have auto reboot disabled and my phoen isnt rmm or frp or locked in any other way and i flashed it using AP
edit :i reseted the file to its original (.tar.md5) and it worked like there was no error (this didnt work when i tried it on other files i had the same problem with ) i enabled force reboot , i couldnt boot to twrp and my phone was working like nothing happend , no verity check , nothing
---------- Post added at 09:30 AM ---------- Previous post was at 09:12 AM ----------
Sahil_Sonar said:
Here's an important note for those you got stock recovery instead of TWRP
--> Make sure auto-reboot is disabled in Odin
--> You will have to reboot into TWRP for the first time after flashing it [/url]
No more thanks :laugh: custom ROM's coming!
Click to expand...
Click to collapse
how do i reboot to twrp if im dtck on stock reboot after flashing ?

Urgent help.
Dm Variety zip is not flashing its showing updater sript error.
Except that everything is ok still i booted in os.
But now my phone showing sim card changed restart u r phone everytime i cant able to use phone

pankspoo said:
Urgent help.
Dm Variety zip is not flashing its showing updater sript error.
Except that everything is ok still i booted in os.
But now my phone showing sim card changed restart u r phone everytime i cant able to use phone
Click to expand...
Click to collapse
So this process of twrp is highly unsafe. Please mention possible solutions in your thread.
When you flash custom binary on your phone(i. E: twrp and root) Samsung automatically trigger it even after flashing RRM bypass file, so it unregister the device thats why sim errors strats evoking after doing this all.
To solve this i flashed stock firmware (how big and slow is that?) ruined whole night and now no sim Error(sim changed restart your phone) this is possibly CSC error. But still my over the air updates not working its showing device is modified.
So please do all this at risk and thread owner please give possible solution to this before giving customs roms or GSI stuff.

Related

[GUIDE][KENZO/KATE] Install LineageOS with locked bootloader

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello guys,
This is my first guide and it is focused on people who just bought their Redmi Note 3 (KENZO/KATE) and having problems with officially unlocking their bootloader. (stuck @ 50% like me)
If you don't want to wait on stock MiUi until you can officially unlock your bootloader (because you need to wait additional ~2 weeks after you received permission from Xiaomi until their servers updated) or you want that extra security layer with locked bootloader this guide is made for you!
Since official LineageOS 14.1 just released, i thought some of you guys are interested in this awesome, easy and safe method.
To save you time searching hours and hours through this forum i made this quick summery.
Downloads :
MiUi 8 Global Developer ROM 6.11.3: KENZO or KATE
ZCX TWRP (direct downloadlink: click here)
Mi Flash 6.8.30
Latest firmware (choose correct device)
[ROM][OFFICIAL][7.1.1][kenzo] LineageOS 14.1 by The_strix
Open GApps - ARM64 - Android 7.1
Instructions : (follow them carefully!)
Extract MiUi 8 Global Developer ROM and replace recovery.img (in images folder) with ZCX TWRP's recovery.img
Flash using Mi Flash (in EDL mode) and check clean_all
After finished flashing process unplug and press [volume up]+[power] until Mi logo shows up then release buttons and it boots to TWRP (change TWRP language from chinese to english: click here)
Reboot to system (if you get prompt: "Disable stock recovery replace now" > just swipe to allow disable)
Boot to MIUI and complete initial setup (important step - don't skip! first boot will take around 10 minutes)
-----------------------------------------------
Shutdown device and boot to TWRP again
(optinal) Backup every partition and safe this backup on an external device
Wipe > Advanced Wipe > check Dalvik / ART Cache, System, Data, Internal Storage, Cache > Swipe to Wipe
Flash Latest firmware, LineageOS 14.1 and GApps (ARM64, Android 7.1)
Reboot to system and you're DONE!!
updated method (works with newest MIUI version) :
There is a new updated method by kuan improved by @N.G. and @razr_96. Thanks for mentioning.
Advantages:
no need to download full MIUI fastboot rom
much faster method, only takes seconds to flash (instead of 4 minutes and you don't have to complete initial MIUI setup which also takes around 5 minutes)
this method is better if you want to stay on MIUI and just want to root
you can stay on your current MIUI version (even 7.1.19 which is currently the latest) and don't have to wipe your data
Disadvantages:
this doesn't clean everything, i would recommend to clean everything if you want to install a custom rom
you have to download a file i can not verify
Instructions : (follow them carefully!)
(optinal) Backup your current MIUI data (Settings > Additional settings > Backup & reset > Local backups > Back up) and copy it to an external media
Download and extract: Kenzo or Kate
(optinal) Replace included ZCX TWRP recovery.img (in images folder) with your preferred TWRP recovery.img
Flash using Mi Flash 20160401 (in EDL mode) and check flash all except data and storage (not clean_all like in the method mentioned above)
BE AWARE: This MiFlash version is different to the MiFlash version mentioned above! This version does only support 64 bit systems and you need atleast Windows 7!
After finished flashing process unplug and press [volume up]+[power] until Mi logo shows up then release buttons and it boots to TWRP (change TWRP language from chinese to english: click here)
Reboot to system
Video tutorial: https://www.youtube.com/watch?v=rCONN1_IPuU
Troubleshooting :
[APP][ROOT][7.1.1]QuickSettings Flashlight fix for all nougat roms
If something goes wrong, start over again and follow my guide step by step.
This guide only works with MiUi 8 Global Developer ROM 6.11.3 or lower.
Put MIUI 8 Global Developer ROM in "C:\ROM" - MiFlash tends to have problems if there are any spaces in folder names.
If you flashed something wrong and have no simcard signal anymore or no IMEI look here for help: EFS Recovery Guide
If you didn't remove your passcode before you did a backuprestore using TWRP:
TWRP > Advanced > Filemanager > /data/system > delete locksettings.db
Issues with locked bootloader :
none
(advanced technique) Higher security with locked bootloader:
Thanks @LeoYL !
A little addition: If you want a even higher level of security, which is nobody except you can flash packages in recovery, you can create a recovery with limited functions and forced signature verification, with your own keys embedded in that recovery.
This is just like the original status of nearly all Android devices when they are shipped: only signed OTA update packages can be applied via recovery. Normally, the packages are signed by OEMs; however, you can become the "OEM" by creating your own private key, which is used during package signing.
Just follow these guides to create a recovery with your own keys. I use CM 13.0 recovery, since it only has basic recovery features, including installing a ZIP file, factory reset, and it has mandatory ZIP signature verification.
http://mjg59.dreamwidth.org/31765.html
https://forum.xda-developers.com/showpost.php?p=62796459&postcount=2
The reason why I don't use TWRP is that it allows update packages with any signature. Although you can enforce signature verification, it can also be switched off in TWRP settings.
Now you get a recovery which only accepts ZIP packages that are signed with your own private key. The only downside is you need to sign every package you want to flash each time. But this also means that if a stranger picks your lost phone up, they can't tamper your phone's OS. If the "reset protection" feature works with locked bootloader on our Redmi Note 3, the only distance between our phones' security and Google devices' is edl mode and encryption.
Wanna try other custom roms?
Just follow this guide and you can flash every other nougat customrom as well like:
[ROM]AOSIP 5.5 for Redmi Note 3(Kenzo)[OFFICIAL BUILDS]
[ROM][Nightlies][android-7.1.1_r6]ResurrectionRemix 5.8.0[OFFICIAL][VoLTE]
[ROM][OFFICIAL][Weekly][7.1.1_R13][Slim 7 For Kenzo]
[ROM] ► [7.1.1 ► N4F26M] ► [OTA][OMS][Goodix] ► Nitrogen OS
credits :
@The_strix: For his development work
@Psy_man: For extracting nougat firmware
@kuan: For creating this method (french forum)
@Tobsucht TM: For answering my questions
If this guide was helpful to you, don't forget to press the Thanks! button :good:
Enjoy your new custom rom!
khajiit

This method also works with Kenzo, obviously using the Kenzo miui rom and firmware instead.

razr96 said:
This method also works with Kenzo, obviously using the Kenzo miui rom instead as well as not flashing the kate firmware.
Click to expand...
Click to collapse
That's right! Thanks for pointing it out.

Redmi Note 3 SE _ Kate
Thanks bro worked on my Kate :good:

How to successfully unlock bootloader(official way) worked for me
https://forum.xda-developers.com/redmi-note-3/how-to/successfully-officially-unlocked-redmi-t3543150
Just use that Miflash : rootjunkysdl.com/files/Redmi%20Note%203%20Pro%20Kenzo/Firmware%20Unbrick/MiFlash.zip
Because that one in thread not working properly.

armo1111 said:
https://forum.xda-developers.com/redmi-note-3/how-to/successfully-officially-unlocked-redmi-t3543150
Just use that Miflash : rootjunkysdl.com/files/Redmi%20Note%203%20Pro%20Kenzo/Firmware%20Unbrick/MiFlash.zip
Because that one in thread not working properly.
Click to expand...
Click to collapse
The guide you linked is not working for me, thats why i made this guide which works 100%.

I tried this with the Global developer ROM for my kenzo.
When I try to get into TWRP, the Mi logo flashes but nothing else happens.
When I let the MIUI ROM start up and try to get into the recovery again,
it only shows me to connect my device to the Mi PC Manager.
What am I doing wrong?

blitzpeace said:
I tried this with the Global developer ROM for my kenzo.
When I try to get into TWRP, the Mi logo flashes but nothing else happens.
When I let the MIUI ROM start up and try to get into the recovery again,
it only shows me to connect my device to the Mi PC Manager.
What am I doing wrong?
Click to expand...
Click to collapse
Did you follow my instructions correctly?
- replaced recovery.img with ZCX TWRP recovery.img - check?
- EDL mode - check?
- remove usb cable after flash and press volume up+power button until mi logo shows up and then release buttons - check?
- are you sure you have kenzo version? did you download rom for kenzo? - check?
!! caution: the rom linked in this guide is only for kate version!!

thank you ! I've been trying the official route for 6 weeks, getting absolutely nowhere (even though I finally do have unlock permission).
this method worked like a charm, finally I'm off MIUI and running LineageOS

khajiit said:
Did you follow my instructions correctly?
- replaced recovery.img with ZCX TWRP recovery.img - check?
- EDL mode - check?
- remove usb cable after flash and press volume up+power button until mi logo shows up and then release buttons - check?
- are you sure you have kenzo version? did you download rom for kenzo? - check?
!! caution: the rom linked in this guide is only for kate version!!
Click to expand...
Click to collapse
1. I guess, do I have to replace only the recovery.img or more? If only recovery.img, then yes!
2. Yes, otherwise MiFlash would give me an error instead of flashing the ROM
3. Yes, but it appears only for an blink of an eye and then disappears again, the phone screen then stays dark
4. Yes, the newest one. Maybe that's the problem?

blitzpeace said:
4. Yes, the newest one. Maybe that's the problem?
Click to expand...
Click to collapse
Yes, that's the problem! This method only works until version 6.11.3.
You have to flash 6.11.3 (or earlier) to get TWRP and then you can flash what you want.
Good luck!

Excellent :good:
To boot into EDL
If you are lost with chinese language in TWRP, look at the first screenshot
And for Gapps take 64bits

Hi, I just got this ROM but when I plug the device in my computer it keeps connecting/disconnecting rapidly. Did I do something wrong?

Very helpful, but i would like to suggest people to use miunlocktool from windows 7-32 bit operating system. Miunlocktool perfectly works in windows 7 & don't stuck at 50%. Before unlock process, just "add oem unlocking device" from MIUI developer setting then start unlocking process..... Its really works for me & also others who followed these steps.

Skex506 said:
Hi, I just got this ROM but when I plug the device in my computer it keeps connecting/disconnecting rapidly. Did I do something wrong?
Click to expand...
Click to collapse
Yes, you did something wrong
Are you sure you have a "KATE" device not "KENZO"?
Follow my guide carefully and try again. It works 100%!
Rifatspir said:
Very helpful, but i would like to suggest people to use miunlocktool from windows 7-32 bit operating system. Miunlocktool perfectly works in windows 7 & don't stuck at 50%. Before unlock process, just "add oem unlocking device" from MIUI developer setting then start unlocking process..... Its really works for me & also others who followed these steps.
Click to expand...
Click to collapse
You don't think i've/we've tried everything? Official unlock works for you? Great! But it doesn't work for everyone... trust me.
Can we please stop to suggest to unlock officially with different guides? This guide is for people who don't want to or can't unlock officially.

khajiit said:
You don't think i've/we've tried everything? Official unlock works for you? Great! But it doesn't work for everyone... trust me.
Can we please stop to suggest to unlock officially with different guides? This guide is for people who don't want to or can't unlock officially.
Click to expand...
Click to collapse
I also said that million times to other people who suggest me different types of official method. When i success after trying couple of methods then i realized it is possible to unlock kate. I'm not saying that your post is not helpful, i saw many post like that, mostly in whirlpool forum. BTW, good luck with your tips :good:

Sure it is possible to unlock Kate officially but you have to wait for Xiaomi to get permission and wait for their servers to syncronize.
You have to wait up to 1 month (depending on your location and other things) until their servers confirms that you have permission to unlock (unable to verify thing). All these guides outside are working but it's a matter of time until they start working. That's why they didn't work for you in first place. :good:

hi @khajiit
They say not enough storage when I want to flash it. Could you please help me with this?
Spoiler: not enough

actuallyaka said:
hi @khajiit
They say not enough storage when I want to flash it. Could you please help me with this?
Click to expand...
Click to collapse
You are using a really old MiFlash version, try updating to the version mentioned in this guide.
And rename your folder "Redmi note 3 pro" to "Redmi.note.3.pro" or "Redmi_note_3_pro".
MiFlash tends to have problem with spaces.

khajiit said:
You are using a really old MiFlash version, try updating to the version mentioned in this guide.
And rename your folder "Redmi note 3 pro" to "Redmi.note.3.pro" or "Redmi_note_3_pro".
MiFlash tends to have problem with spaces.
Click to expand...
Click to collapse
Thank you khajiit..
it works know with using 2016 version..

[RECOVERY][ROOT]TWRP 3.1.0-1 Samsung Galaxy J3 Emerge SM-J327P

Unofficial release -TWRP recovery for the Galaxy J3 Emerge - SM-J327P, Qualcomm MSM8937
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.1.0-0 Released
Mar 10, 2017
TWRP 3.1.0-0 is out now for all currently supported devices.
What's new in 3.1.0-0:
vold decrypt on a few select HTC devices, TWRP will now attempt to use the system partition's vold and vdc binaries and libraries to decrypt the data partition (nkk71 and CaptainThrowback)
adb backup to stream a backup directly to or from your PC, see documentation here (bigbiff)
tweak MTP startup routines (mdmower)
support new Android 7.x xattrs for backup and restore to fix loss of data after a restore (Dees_Troy)
support POSIX file capabilities backup and restore to fix VoLTE on HTC devices and possibly other issues (Dees_Troy)
better indicate to users that internal storage is not backed up (Dees_Troy)
improve automatic determination of TW_THEME (mdmower)
minimal getcap and setcap support (_that)
try mounting both ext4 and f2fs during decrypt (jcadduono and Dees_Troy)
shut off backlight with power key (mdmower)
timeout during FDE decrypt (Dees_Troy and nkk71)
support for FBE decrypt and backing up and restoring FBE policies (Dees_Troy)
boot slot support (Dees_Troy)
TWRP app install prompt during reboot (Dees_Troy)
support for AB OTA zips (Dees_Troy)
support new Android 7.x log command (Dees_Troy)
update recovery sources to AOSP 7.1 (Dees_Troy)
numerous bugfixes and improvements by too many people to mention
Official TWRP App
Mar 11, 2017
Official TWRP App
The official TWRP app is the first and only first-party app developed by Team Win for TWRP. Please bear with us as we work to fix any bugs and build out the features. The initial version of the app does not support flashing on the Pixel due to the Pixel's A/B partition layout. In addition, the app may not support finding and flashing images from external storage locations. We are working hard to improve these items and bring you more new features.
Download Links:
We recommend downloading the app from the Play Store.
If you do not have Play Store access, you may download the Official TWRP App here: https://dl.twrp.me/twrpapp/
How do I use the app?
When you first open the app, you will be greeted by a few options. First, you will need to agree not to hold us responsible for anything that happens to your device while using the app. You may also grant the app root permissions. The app will work without root, but some functionality like image flashing will be disabled. Lastly, you can opt into enabling InsightCore (more on this feature later).
Once you have passed this initial screen, you will be greeted with the app home screen where you can choose TWRP FLASH or NETWORK STATISTICS (more on the network statistics later). On the TWRP FLASH screen you will need to select a device. Once you have selected a device, the app will periodically check for new TWRP versions for the device that you have selected. The default interval is once per day, but you can tap on the settings icon in the upper-right to change the interval or disable the update check entirely.
If you enabled root access, you will see options for selecting an image and buttons for flashing the selected image to boot or recovery. Note that you should flash TWRP images to recovery. The boot image flashing is for flashing full boot images (not just kernel zImages) and should not be used for flashing TWRP.
Update 15/3/2017
TWRP 3.1.0-1 MM build released.
Current status: BETA
Features:
MTP working
ADB working
SEANDROID warning fix
TWRP and Kernel built from latest source
Factory Image flashing(see below)
NTFS support
F2FS support >> To be added
Twrp app support
New feature available in TWRP v3 is system image backup and restore and factory image flashing (see TWRP changelog for details)
Basically this means factory system images from the official firmware can now be flashed with TWRP.
This feature can be found under INSTALL >> INSTALL IMAGE >> select image to flash >> select partition.
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
Instructions:
Flash with ODIN 3.12.7 in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
NOTE: ON SOME ANDROID 5.1.1/6.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
DOWNLOAD:
twrp_3.1.0-1_j327p_14317
To Root:
Flash the latest SuperSU release with TWRP:
https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133/
To disable forced encryption and mount internal storage:
(Note this MUST be flashed after SuperSU if you intend to root)
1. Boot to Twrp
2. Format Data partition using FORMAT DATA button under Wipe options.
(Note: This will wipe the internal storage)
3. Check DATA is mountable.
4. Install SuperSU (if root is required)
5. Install boot image patch below.
6. Reboot
Boot image patch
no-verity-no-encrypt_ashyx
DEVICE TREE: soon
PLEASE DO *NOT* DIRECT LINK TO THESE FILES. PLEASE LINK TO THIS POST
Credits: Me, my testers @Doctur, @infixremix, Teamwin
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
FEEDBACK IS APPRECIATED PLEASE.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
.

Reserved

Might of bought you a pack of smokes not the beer....either way donation was just a small thankyou...its been awhike withiut root im almost forgetting why i wanted it rooted in the first place lol Enjoy the smokes or w.e the donation goes to
Ur tha sh#$ bro

Doctur said:
Might of bought you a pack of smokes not the beer....either way donation was just a small thankyou...its been awhike withiut root im almost forgetting why i wanted it rooted in the first place lol Enjoy the smokes or w.e the donation goes to
Ur tha sh#$ bro
Click to expand...
Click to collapse
Thanks for the heads up with the other member and your support. I'll report it.

@ashyx by any chance do you have this device? .. i have 7.0 J327P seen it in the Samsung kitchen but not sure if its for the Sprint or Boostmobile worst case odin wont flash it

JUSMEJOSE said:
@ashyx by any chance do you have this device? .. i have 7.0 J327P seen it in the Samsung kitchen but not sure if its for the Sprint or Boostmobile worst case odin wont flash it
Click to expand...
Click to collapse
No sorry i don't own this device.

@ashyx, forgive me for not knowing, I am not familiar all that much with the various Samsung's and pre-paid phones. I have Nexus'.
Question, the boy got a prepaid from Best Buy and it is a Samsung J327P, running 6.0.1 yet the a search on Google shows different chip, a MSM8917. So will this recovery work or not on it? Here is a picture of the about screens.
View attachment 4081849
Don't want to screw it up since I don't have original firmware to flash back to it.
PS I seen in the thread talk of a link to where you can buy a copy of the firmware for some of these could you PM me that link please?
Thank you.
Sent from my Nexus 5X using XDA-Developers Legacy app

rekids said:
@ashyx, forgive me for not knowing, I am not familiar all that much with the various Samsung's and pre-paid phones. I have Nexus'.
Question, the boy got a prepaid from Best Buy and it is a Samsung J327P, running 6.0.1 yet the a search on Google shows different chip, a MSM8917. So will this recovery work or not on it? Here is a picture of the about screens.
Don't want to screw it up since I don't have original firmware to flash back to it.
PS I seen in the thread talk of a link to where you can buy a copy of the firmware for some of these could you PM me that link please?
Thank you.
Click to expand...
Click to collapse
Yes that's the same device. MSM8917 is the same platform as MSM8937.
You have no worries.
Just post back if you get stuck and need the firmware.

Thank you so much ?, will let you know how it goes.
Sent from my Nexus 5X using XDA-Developers Legacy app

I want to try this root but I get enter pin request when I try to turn on OEM unlocking. What should I do?

joeyjojojjjjjj said:
I want to try this root but I get enter pin request when I try to turn on OEM unlocking. What should I do?
Click to expand...
Click to collapse
Pin request? Never heard of that before. Have you set a pin/password on your device?

Nevermind, my daughter pit an unlock pin on it. Got it now going to try this.

Everything went smooth! Thank you so much!

rekids said:
Everything went smooth! Thank you so much!
Click to expand...
Click to collapse
Thanks for the click, out of 141 downloaders only 3 were clickers.
I find it amsusing that the author of the thread below using stolen files from this one has just as many clicks.
https://forum.xda-developers.com/an...-j3-emerge-t3573551/post71443474#post71443474
.

No problems at all... Everything went perfect!

I flashed TWRP and everything is now force closing.. Imma try to root since that factory resets the devices (hope i already had a previous backup of everything)
Edit: Everything worked! Thank you, Dev. One question, do we disable KNOX in SuperSU?

Cyclic said:
I flashed TWRP and everything is now force closing.. Imma try to root since that factory resets the devices (hope i already had a previous backup of everything)
Edit: Everything worked! Thank you, Dev. One question, do we disable KNOX in SuperSU?
Click to expand...
Click to collapse
Yes I'd advise disabling Knox.

need help!!!!
ashyx said:
Yes that's the same device. MSM8917 is the same platform as MSM8937.
You have no worries.
Just post back if you get stuck and need the firmware.
Click to expand...
Click to collapse
Any chance you have the firmware or boot.img? after i flashed the patch all went to hell and now my phone says it has no OS

pumkinhead13 said:
Any chance you have the firmware or boot.img? after i flashed the patch all went to hell and now my phone says it has no OS
Click to expand...
Click to collapse
There's no way the patch did that. You must have wiped the system partition in twrp.
https://www.androidfilehost.com/?fid=817550096634755921

ashyx said:
There's no way the patch did that. You must have wiped the system partition in twrp.
Click to expand...
Click to collapse
uuuh no, so I did all the above said to do and everything was fine, it booted up (before i flashed the patch) then I went back into recovery, flashed the patch and selected "boot to system" it booted to samsung logo then at the top in small yellow writing just said "kernal" it sat there for 15 mins, before i pulled the battery, then flashed again....this time upon finish it stated "NO OS"

[RECOVERY][ROOT]TWRP 3.3.1-1 Samsung Galaxy J3 2017 SM-J330F/J330FN/J330G/DS

Unofficial release -TWRP recovery for the Galaxy J3 2017 - SM-J330F/FN/FZ/G/DS EXYNOS 7570
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.3.1-0 Released
May 22, 2019
TWRP 3.3.1-0 is out now for most currently supported devices.
What's new in 3.3.1-0:
* Fix selinux issues during formatting - dianlujitao
* Various fixes for toybox and toolbox builds - CaptainThrowback and bigbiff
* Flash both A and B partitions when installing a recovery ramdisk - Dees_Troy
* Add option to uninstall TWRP app from /system - Dees_Troy
* Create digest for subpartitions - bigbiff
Want to get notifications when we release new versions of TWRP? Install the TWRP app and select your device!
We need your help! The bulk of TWRP work is done by a handful of people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance
UPDATE 10/8/2019
TWRP 3.3.1-1 OO/PP build released
Current status: Beta
Update 15/9/2018
TWRP 3.2.3-1 OO build released.
Current status: Stable
Update 27/1/2018
TWRP 3.2.1-1NN build released
Current status: Stable
Update 23/11/2017
TWRP 3.1.1-1 NN build released.
Current status: Stable
Features:
TOUCHSCREEN working
MTP working
ADB working
SEANDROID warning fix
TWRP and Kernel built from latest source
Factory Image flashing(see below)
NTFS support
F2FS support >> To be added
Twrp app support
New feature available in TWRP v3 is system image backup and restore and factory image flashing (see TWRP changelog for details)
Basically this means factory system images from the official firmware can now be flashed with TWRP.
This feature can be found under INSTALL >> INSTALL IMAGE >> select image to flash >> select partition.[/B]
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
Instructions:
NOTE: ON ANDROID 5.1.1> DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
Flash with ODIN in the AP slot.
1. Put your device in DOWNLOAD mode.
2. Uncheck Auto reboot. (NOT REQUIRED FOR INSTALLING TWRP 3.3.1-1)
3. Load the respective file below into the AP slot and hit start.
4. After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME. (NOT REQUIRED FOR INSTALLING TWRP 3.3.1-1, THE DEVICE WILL AUTO BOOT TO RECOVERY)
5. Flash the V3 RMM bypass zip
https://forum.xda-developers.com/showpost.php?p=79745844&postcount=627
NOTE: FAILURE TO FOLLOW THE STEPS ABOVE IMPLICITLY WILL RESULT IN STOCK RECOVERY REPLACING TWRP AT FIRST BOOT AND BECOMING RMM LOCKED FOR 7 DAYS.
I ALSO SUGGEST BACKING UP ANYTHING YOU NEED ON INTERNAL STORAGE. AT SOME POINT YOU MAY EXPERIENCE A 'VERIFICATION FAILED MESSAGE' .
THIS IS NORMAL, BUT WILL REQUIRE THE DATA PARTITION TO BE FORMATTED IN TWRP.
DOWNLOAD:
twrp_3.3.1-1_sm-j330x_13819
twrp_3.2.3-1_j330_13918
twrp_3.2.1-1_sm-j330f_270117
twrp_3.1.1-1_sm-j330f_231117
Nougat Root instructions:
Install latest Magisk release with TWRP:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
To disable forced encryption, disable dmverity and mount internal storage:
1. Boot to Twrp
2. Format Data partition using FORMAT DATA button under Wipe options.
(Note: This will wipe the internal storage)
3. Check DATA is mountable.
4. Install the boot image patch.
Boot image patch
no-verity-no-encrypt_ashyx
5. Install Magisk(if root is required)
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
6. Reboot
OREO ONLY ROOT INSTRUCTIONS:
1. Install the Root patch kernel with TWRP.
J330F-FN_root_no_sim_patch
NOTE:This is a custom Oreo J330F/FN XXU3BRG3 permissive/enforcing kernel and patch built from source. It makes changes to the system partition also.
What does it do?:
*It installs a custom kernel to fix the no SIM issue when rooting.
*Patches the system to fix WIFI and Bluetooth not turning on when using custom kernels.
*Patches DM-Verity.
*Removes forced encryption and patches /data not able to be mounted (after formatting).
*Removes the SecurityLogAgent nag when using a custom kernel.
2. If you wish to mount /DATA for access to internal storage then FORMAT the /DATA partition.
3. To root install the latest Magisk below.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
PIE ONLY ROOT INSTRUCTIONS:
To root install latest Magisk below.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
To disable encryption (mount DATA in TWRP) install the zip below with TWRP:
Disable_Dm-Verity_ForceEncrypt_Quota_08.02.2019
Finally FORMAT /DATA in TWRP.
Reboot.
DEVICE TREE: soon
PLEASE DO *NOT* DIRECT LINK TO THESE FILES. PLEASE LINK TO THIS POST
Credits: Me, my tester @lemlis, Teamwin
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
FEEDBACK IS APPRECIATED PLEASE.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU

UPDATE: Touchscreen fixed
.

Arggghh i feel something goes wrong with my device intead of succesfull installation. Yes i can flash zip and make nandroid backup. But my device not running properly. I can't adjust screen brightness even camera not functioning. Now i'm waiting for full batery charge to flash stock rom & try to flash twrp once again
---------- Post added at 22:19 ---------- Previous post was at 22:16 ----------
Anual said:
Arggghh i feel something goes wrong with my device intead of succesfull installation. Yes i can flash zip and make nandroid backup. But my device not running properly. I can't adjust screen brightness even camera not functioning. Now i'm waiting for full batery charge to flash stock rom & try to flash twrp once again
Click to expand...
Click to collapse
Now my j330g working normally after i flash cf auto root without flashing stock rom. What's the problem??

Anual said:
Arggghh i feel something goes wrong with my device intead of succesfull installation. Yes i can flash zip and make nandroid backup. But my device not running properly. I can't adjust screen brightness even camera not functioning. Now i'm waiting for full batery charge to flash stock rom & try to flash twrp once again
---------- Post added at 22:19 ---------- Previous post was at 22:16 ----------
Now my j330g working normally after i flash cf auto root without flashing stock rom. What's the problem??
Click to expand...
Click to collapse
Probably the version of SuperSu you flashed.

ashyx said:
twrp_3.1.1-1_sm-j330f_231117
Click to expand...
Click to collapse
Thanks.now color in TWRP is blue.Only in screenshot yellow.backup CPEFS is 0 ? with changed recovery.fsab i have CPEFS 8MB
Works all good.

lemlis said:
Thanks.now color in TWRP is blue.Only in screenshot yellow.backup CPEFS is 0 ? with changed recovery.fsab i have CPEFS 8MB
Works all good.
View attachment 4340464View attachment 4340476
Click to expand...
Click to collapse
Seems I didn't include my updated FSTAB in the new build. Corrected, thanks for pointing it out.

ashyx said:
Probably the version of SuperSu you flashed.
Click to expand...
Click to collapse
Yeaa you right..i use super su which remain in my memory card almost 2 years ago ???

Sorry for this offtopic but can anyone post a link of latest firmware for J330G/DS, which doesn't want to grab my money for Fast download speed please? I want to try this recovery but still afraid if something bad happens. Thanks in advance!
@ashyx, thank you so much for this recovery sir! I've been waiting for a recovery for this phone for so long and now it's here! you managed to create this recovery for this phone even without one! I'm impressed sir!

BlackDragonz said:
Sorry for this offtopic but can anyone post a link of latest firmware for J330G/DS, which doesn't want to grab my money for Fast download speed please? I want to try this recovery but still afraid if something bad happens. Thanks in advance!
@ashyx, thank you so much for this recovery sir! I've been waiting for a recovery for this phone for so long and now it's here! you managed to create this recovery for this phone even without one! I'm impressed sir!
Click to expand...
Click to collapse
updato.com

i cant flash super su twrp didn't show the file to flash
File to flash have to be on sd card ?

Help Me

azhar960225 said:
Help Me
Click to expand...
Click to collapse
Police. Fire or ambulance?

I Want root j3 pro 2017..but how

azhar960225 said:
I Want root j3 pro 2017..but how
Click to expand...
Click to collapse
Flash SuperSU or Magisk.

How? To Flash How? Cannot root j3 How to Flash?
7.11 Android...

arabarabow said:
twrp didn't show the file to flash
Click to expand...
Click to collapse
put zip file inside any folder.File to flash have to be in folder

Just done flashing latest build and flashed magisk, all are running fine. Tysm @ashyx !

can anyone help me telephone stuck on logo and i cant do nothing even reboot to twrp @ashyx

arabarabow said:
can anyone help me telephone stuck on logo and i cant do nothing even reboot to twrp @ashyx
Click to expand...
Click to collapse
Boot to TWRP and flash Supersu or Magisk. Use the three button combo.

Can i just use cf auto root to root my phone without installing a recovery? Or it's better to root using this method?

[recovery][root]twrp-3.2.x galaxy j2 pro 2018 sm-j250f

Unofficial release -TWRP recovery for the Samsung Galaxy J2 PRO 2018 - Qualcom msm8917
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS FOR FIRMWARE BASED ON "ARD3" OR "ARD*" . SO PLEASE MAKE SURE YOUR FIRMWARE IS "ARD3 OR "ARD*" :
Current status: BETA
Features:
SEANDROID warning fix
TWRP and Kernel built from latest source
system Image backup and flashing support
efs backup support
WHATEVER YOU DO BEFORE FLASHING ANYTHING WITH TWRP MAKE A BACKUP OF YOUR DEVICE WITH TWRP AND HAVE THE STOCK FIRMWARE TO HAND JUST IN CASE DOWNLOADED FROM SAMMOBILE OR UPDATO.
THIS WILL TRIP KNOX AND MAY VOID YOUR WARRANTY!
Instructions:
(Note: failure to follow these instructions implicitly will cause TWRP to be replaced by stock recovery at boot!)
Flash with ODIN in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
NOTE: ON SOME ANDROID 5.1.1/6.0/7.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
Download:
recovery.tar.md5 For J250f
IMPORTANT! This device enforces dm-verity. ANY modifications or even mounting system will put the device into a bootloop. To prevent this TWRP will ask at first boot if you want to keep system 'Read only' or 'Allow modifications to system'. If you choose to keep 'Read only' you will have to flash TWRP at every boot to recovery.
If you choose to 'Allow' then SuperSU or the boot patch needs flashing below to disable dm-verity.
To Root:
Flash the latest magisk with TWRP:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
This device forces encryption.
To disable forced encryption, mount internal storage(DATA) and disable dm-verity you must flash the boot patcher below:
(Note this MUST be flashed after SuperSU if you intend to root)
1. Boot to Twrp
2. Format Data partition using FORMAT DATA button under Wipe options.
(Note: This will wipe the internal storage)
3. Check DATA is mountable.
4. Install magisk (if root is required)
5. Install boot image patch below.
6. Reboot
Boot image patcher
no-verity-no-encrypt-5.1
DEVICE TREE: soon
PLEASE DO *NOT* DIRECT LINK TO THESE FILES. PLEASE LINK TO THIS POST
Credits: Me, Teamwin, Omnirom, my tester ilmiawan budi utomo @FBGroup
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
FEEDBACK IS APPRECIATED PLEASE.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU

Reserved

readme
this for firmware base on "ard3" please make sure your firmware "ard3"

andii_nr said:
readme
this for firmware base on "ard3" please make sure your firmware "ard3"
Click to expand...
Click to collapse
help me please J250FDXU1ARA2

Khang140401 said:
help me please J250FDXU1ARA2
Click to expand...
Click to collapse
First update to ARD3

andii_nr said:
First update to ARD3
Click to expand...
Click to collapse
I updated and flash this with odin but it not work ☹☹ my board msm8937 ? Work? Please reply me.
---------- Post added at 06:10 AM ---------- Previous post was at 06:04 AM ----------
[/PHP]
andii_nr said:
First update to ARD3
Click to expand...
Click to collapse

Khang140401 said:
I updated and flash this with odin but it not work ☹☹ my board msm8937 ? Work? Please reply me.
---------- Post added at 06:10 AM ---------- Previous post was at 06:04 AM ----------
[/PHP]
Click to expand...
Click to collapse
Are you sure your phone sm-j250f and firmware ARD3 ?
If yes that recovery work fine , am also test with 3friend and work ..

andii_nr said:
Are you sure your phone sm-j250f and firmware ARD3 ?
If yes that recovery work fine , am also test with 3friend and work ..
Click to expand...
Click to collapse
see it ??

andii_nr said:
Are you sure your phone sm-j250f and firmware ARD3 ?
If yes that recovery work fine , am also test with 3friend and work ..
Click to expand...
Click to collapse
My devices _J250FDXU2ARD3

problem
team win worked with me but when i want to open my phone it reboot himself and i should install rom

Khang140401 said:
see it ??
Click to expand...
Click to collapse
Read all instruction ..
This phone has deencrypt .. so you must FORMAT DATA -> flash magisk -> flash boot-patcher ..

Costum ROM s8 for j250f

andii_nr said:
Unofficial release -TWRP recovery for the Samsung Galaxy J2 PRO 2018 - Qualcom msm8917
THIS FOR FIRMWARE BASED ON "ARD3" OR "ARD*" . SO PLEASE MAKE SURE YOUR FIRMWARE IS "ARD3 OR "ARD*" :
Current status: BETA
Features:
SEANDROID warning fix
TWRP and Kernel built from latest source
system Image backup and flashing support
efs backup support
WHATEVER YOU DO BEFORE FLASHING ANYTHING WITH TWRP MAKE A BACKUP OF YOUR DEVICE WITH TWRP AND HAVE THE STOCK FIRMWARE TO HAND JUST IN CASE DOWNLOADED FROM SAMMOBILE OR UPDATO.
THIS WILL TRIP KNOX AND MAY VOID YOUR WARRANTY!
Instructions:
(Note: failure to follow these instructions implicitly will cause TWRP to be replaced by stock recovery at boot!)
Flash with ODIN in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
NOTE: ON SOME ANDROID 5.1.1/6.0/7.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
Download:
recovery.tar.md5 For J250f
IMPORTANT! This device enforces dm-verity. ANY modifications or even mounting system will put the device into a bootloop. To prevent this TWRP will ask at first boot if you want to keep system 'Read only' or 'Allow modifications to system'. If you choose to keep 'Read only' you will have to flash TWRP at every boot to recovery.
If you choose to 'Allow' then SuperSU or the boot patch needs flashing below to disable dm-verity.
To Root:
Flash the latest magisk with TWRP:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
This device forces encryption.
To disable forced encryption, mount internal storage(DATA) and disable dm-verity you must flash the boot patcher below:
(Note this MUST be flashed after SuperSU if you intend to root)
1. Boot to Twrp
2. Format Data partition using FORMAT DATA button under Wipe options.
(Note: This will wipe the internal storage)
3. Check DATA is mountable.
4. Install magisk (if root is required)
5. Install boot image patch below.
6. Reboot
Boot image patcher
no-verity-no-encrypt-5.1
DEVICE TREE: soon
PLEASE DO *NOT* DIRECT LINK TO THESE FILES. PLEASE LINK TO THIS POST
Credits: Me, Teamwin, Omnirom, my tester ilmiawan budi utomo @FBGroup
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
FEEDBACK IS APPRECIATED PLEASE.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
Click to expand...
Click to collapse
Thanks bro for twrp

ARD3 doesn't support current root. Why? Only restart... Phone is not opening.
TWRP => all directory 0 mb. There is a problem.

Thanks for your hard work. The recovery works really fine with our device if instructions were followed carefully.
Now all we need is a custom kernel with selinux set to permissive. I appreciate any help.

Help me
I have a problem with my mobile device that shows me this message when running
"Set warranty bit: kernel"
What is the solution?

i can't use camera when rooted!
pls help me!

timtini said:
i can't use camera when rooted!
pls help me!
Click to expand...
Click to collapse
Latest version of SuperSU or Magisk.

ashyx said:
Latest version of SuperSU or Magisk.
Click to expand...
Click to collapse
of course!
i was try to root with Super SU and Magisk but it still bug!
So I thought of twrp caused!

Nice kang ?

[RECOVERY][OFFICIAL]TWRP 3.4.0.0 Recovery [m30lte]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
UPDATE : TWRP FOR M30 IS NOW OFFICIAL
I would like to thank TeamWin for their amazing work!
After a long hiatus from Android Development, I am back to the dev scene.
As usual, I am not responsible for damage to your device, you, the user is choosing to make these modifications.
Your device's warranty is VOID if this procedure is followed, Proceed at your own caution!
With the new update of Android 10 for our device SM-M305[F] / M305[M], Samsung reimplemented RMM and called it KG(KnoxGuard), there is confusion in the device community on how to install TWRP and root device.
@vdbhb59 and myself @akhil99 are actively working together to bring support to this device.
Follow these updated instructions to get TWRP working with Latest Stock Firmware.
This thread will be updated regularly.
STRONGLY ADVICE TO BACKUP DATA.
Steps to get TWRP working with stock firmware
Reported to be working with firmware w/ following details
Device: Samsung Galaxy M30 SM-M305[F] / M305[M]
BL: M305FDDU5CTF2
AP: M305FDDU5CTF2
CP: M305FDDU5CTF1
CSC: HOME_CSC_OMC_ODM_M305FODM5CTF2
Patch: 1st May 2020
Android Version: 10
One UI Version : 2.0
First of all flash completely stock firmware, you can always root with Magisk later.
If you are rooted and have TWRP installed already and you are not on Latest Firmware mentioned above then flash latest firmware.
Select BL, AP, CP, CSC (Use HOME_CSC).
Never only flash AP, will cause your /data to shrink.
Once you're updated to latest firmware mentioned above, make sure you unlock your bootloader.
Go into Settings>Software Info>Tap build number seven times.
Go into Settings>Developer Options>OEM Unlock & enable it.
It will prompt you with password/pin confirming to unlock bootloader. Device will reboot and wipe itself.
Setup device once it reboots and again enable developer options and see OEM unlock to be enabled and togglable.
Next enable USB debugging in Settings>Developer Options>USB Debugging.
Open up ADB/FASTBOOT Utility on your computer and connect your device with USB C cable.
Type in following commands without the quotations.
1."adb reboot download" ; reboots your device into Download mode, can flash device via Odin Downloader(Windows) or Heimdall Utility(Linux)
2.Download the attached TWRP.tar if you're using Odin or TWRP.img if you're using Heimdall to flash.
3.Flash the TWRP recovery by
ODIN:-
Clicking AP in Odin and make sure the Repartition and Auto Reboot boxes are UNTICKED/NOT SELECTED.
Click Start at bottom.
Heimdall:-
Open up a terminal window in the directory where twrp.img is downloaded.
Type in heimdall flash --RECOVERY twrp.img --no-reboot
4.Once flash is complete, press Volume Down+Power Button to shutdown and as soon as screen is black IMMEDIATELY PRESS AND HOLD VOLUME UP+POWER Button and let go of Power button when you see samsung logo, continue holding Volume Up until device boots into TWRP.
5.Once device boots into TWRP, swipe to allow modifications and then Click Wipe>Format Data>type in "yes". This will format everything and reset the device.
6.Go into Wipe>Advanced Wipe>Tick only Cache and swipe to wipe it.
7.Reboot back into recovery by Reboot>Recovery>Do not Install.
8.Once rebooted back into TWRP, transfer the attached zip to phone Internal or SDcard, DO NOT RENAME THE ZIP.
9.Flash the zip by, Install > Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip, swipe to flash it.
10.Wipe cache and dalvik cache, reboot into system by, Reboot > System > Do not install.
11.Device will boot into Android 10 One UI 2.0 wait patiently for about 15mins.
12.Once device boots, setup as usual, you will need internet.
13.Voila! You have successfully installed TWRP alongside Stock firmware on Android 10 M305FDDU5CTF2 firmware.
Thanks to @vdbhb59 for his persistent testing and timely directions that helped me to bring you this guide.
Thanks to @SahilSonar for bringing TWRP to our device initially
Thanks to @akhil99 (me) for fixing MTP/ADB in TWRP recovery and bringing you this guide.
HIT THANKS IF WE HELPED YOU.
Downloads:
Edit: TWRP for Odin fixed as some users reported problems.
Official: TWRP OFFICIAL
Disable DM_Verity_ForceEncrypt : https://androidfilehost.com/?fid=8889791610682882483
XDA:DevDB Information
[RECOVERY][OFFICIAL]TWRP 3.4.0.0 Recovery [m30lte], Tool/Utility for the Samsung Galaxy M30
Contributors
Akhil99
Source Code: https://github.com/akhil1999/twrp_device_samsung_m30lte
Version Information
Status: Stable
Stable Release Date: 2020-07-10
Created 2020-07-10
Last Updated 2020-08-25

Reserved
25/08/2020 : OFFICIAL STATUS!
12/07/2020 : Added extra steps clearly mentioning for those getting into modding for the first time
10/07/2020 : Unofficial Stable release!

Quick Question
Actually I read here on XDA before, that the only way to root One UI is to patch the whole firmware using magisk, then flash it via ODIN. Since I can't download a large (over 2 gigs of) firmware, I was looking for a substitute.
After flashing TWRP as per your post above, would I be able to flash magisk via it amd root my M30? Would it be fine? Have anyone rooted their M30 with TWRP?
BTW, thanks @Akhil99

Azamsm said:
Actually I read here on XDA before, that the only way to root One UI is to patch the whole firmware using magisk, then flash it via ODIN. Since I can't download a large (over 2 gigs of) firmware, I was looking for a substitute.
After flashing TWRP as per your post above, would I be able to flash magisk via it amd root my M30? Would it be fine? Have anyone rooted their M30 with TWRP?
BTW, thanks @Akhil99
Click to expand...
Click to collapse
I have already posted about it. I am rooted with TWRP
Snaps coming soon

Sir, will it erase the data ?

Vinnu777 said:
Sir, will it erase the data ?
Click to expand...
Click to collapse
Nope, it is just recovery, so it will not erase any data.https://forum.xda-developers.com/newreply.php?do=newreply&p=83039519

Vinnu777 said:
Sir, will it erase the data ?
Click to expand...
Click to collapse
You are choosing the "Format Data" option that wipes everything in the Internal Storage. I advise you to back up data!

TWRP Images
TWRP images posted.

Sir, whenever I try to flash the given TWRP zip , after pressing start it throwing "Odin downloader has stopped working" msg and stopped working. But when i try to flash old TWRP zip it giving success . I have flashed latest firmware from below site
samfrew.com/download/Galaxy__M30
Could you pls tell me what happening , why your TWRP file is not installing or is this related to FIRMWARE I have flashed ,plz Check it sir!

Vinnu777 said:
Sir, whenever I try to flash the given TWRP zip , after pressing start it throwing "Odin downloader has stopped working" msg and stopped working. But when i try to flash old TWRP zip it giving success . I have flashed latest firmware from below site
samfrew.com/download/Galaxy__M30
Could you pls tell me what happening , why your TWRP file is not installing or is this related to FIRMWARE I have flashed ,plz Check it sir!
Click to expand...
Click to collapse
You need to be on Stock ROM, and the latest June release. Check my thread for the stock ROM, and download from there..
[Rom][ANDROID 10-Q | Stock & Rooted Firmware | M305FDDU5CTF2] - https://forum.xda-developers.com/ga...m-android-10-q-stock-rooted-firmware-t4026819

I don't want anything to go wrong. So I have this latest build with may security patch. My question is- Which section in ODIN should I choose to pick twrp tar file?

Azamsm said:
I don't want anything to go wrong. So I have this latest build with may security patch. My question is- Which section in ODIN should I choose to pick twrp tar file?
Click to expand...
Click to collapse
AP Slot

Vinnu777 said:
Sir, whenever I try to flash the given TWRP zip , after pressing start it throwing "Odin downloader has stopped working" msg and stopped working. But when i try to flash old TWRP zip it giving success . I have flashed latest firmware from below site
samfrew.com/download/Galaxy__M30
Could you pls tell me what happening , why your TWRP file is not installing or is this related to FIRMWARE I have flashed ,plz Check it sir!
Click to expand...
Click to collapse
TWRP for Odin is now fixed. Kindly try again. It was a error on my part that has now been fixed!

Akhil99 said:
TWRP for Odin is now fixed. Kindly try again. It was a error on my part that has now been fixed!
Click to expand...
Click to collapse
I tried and twrp booted. Then I formatted data and wipe dalvik/ART cache & cache in Advanced wipe. Then I rebooted in twrp again. Then I flashed Disable Dm verity zip and wiped dalvik cache.
Now when I try to boot into system, it boots in download mode instead!!!!
Please help.
Has it something to do system unmounted? Please reply. My phone is still resting in TWRP!

Vinnu777 said:
Sir, whenever I try to flash the given TWRP zip , after pressing start it throwing "Odin downloader has stopped working" msg and stopped working. But when i try to flash old TWRP zip it giving success . I have flashed latest firmware from below site
samfrew.com/download/Galaxy__M30
Could you pls tell me what happening , why your TWRP file is not installing or is this related to FIRMWARE I have flashed ,plz Check it sir!
Click to expand...
Click to collapse
After flashing TWRP and rebooting to system, did your phone also go in download mode or it just successfully booted? Cuz my phone is in download mode after I tried to reboot to system post flashing TWRP.
Can you plz help me

Arshebareen said:
After flashing TWRP and rebooting to system, did your phone also go in download mode or it just successfully booted? Cuz my phone is in download mode after I tried to reboot to system post flashing TWRP.
Can you plz help me
Click to expand...
Click to collapse
Looks like you aren't on patched firmware as mentioned in the thread. Head over hereto get and install the magisk patched firmware. Remember this will trip knox as usual.

Akhil99 said:
Looks like you aren't on patched firmware as mentioned in the thread. Head over hereto get and install the magisk patched firmware. Remember this will trip knox as usual.
Click to expand...
Click to collapse
I fixed the MTP issue in WIndows. I had to turn off and then turn on MTP devices module. It looks like a windows issue.

vdbhb59 said:
I fixed the MTP issue in WIndows. I had to turn off and then turn on MTP devices module. It looks like a windows issue.
Click to expand...
Click to collapse
I have a solution for MTP but I don't have a way to send files to you.

Topser99 said:
I have a solution for MTP but I don't have a way to send files to you.
Click to expand...
Click to collapse
Attach the file here.

vdbhb59 said:
Attach the file here.
Click to expand...
Click to collapse
twrp that i edited for you
https://mega.nz/file/TlVXUaiD#X_87J_yzoHGX6PQvkMJ-jmhLbViDDocI1IXOTcB_MNI
This is the file that I edited.
https://mega.nz/file/rkUzgASY#GwiHdcQLcQduIMZvGHBxsXb1YrkSUSs3_41rhlTA8aQ

Database Users

welcome