NOTE # I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
# Please do some research if you have any concerns about features included in the products you find here before flashing it!
# YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
# Your warranty will be void if you tamper with any part of your device / software.
UNOFFICIAL BUILD!
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
ALL THE SOURCE CODE IS OPEN SOURCE AND I WILL LINK AT THE BOTTOM OF THE POST
CHANGELOG
SEE BELOW POSTS FOR CHANGELOG
BUGS
Pixel launcher force closes, I'll try to fix it in the next build
Update- There is a work around, Flash this the below zip in magisk
https://bit.ly/2PWtdf1 by @adithyafrk
STEPS TO FLASH
1 INSTALL ROM
2 FLASH GAPPS (NANO OR PICO)
3 FLASH MAGISK ( OPTIONAL )
4 REBOOT
5 YOU CAN FLASH ANY KERNEL
Telegram http://t.me/LOSUNOFFICIAL
DOWNLOADs
ROM- https://bit.ly/2PVRGAY
GAPPS- https://opengapps.org
SPEACIAL THANKS TO : @hiteshhv @akhilnarang @notallowedontelegram @adi20_01
@adithyafrk @adwait001
Thank you for your build, please move your thread to this section https://forum.xda-developers.com/redmi-note-4/xiaomi-redmi-note-4-snapdragon-roms-kernels-recoveries--other-development, and please include your device tree,kernel and vendor source to this thread.
As this is forum rule.
Nicklas Van Dam said:
Thank you for your build, please move your thread to this section https://forum.xda-developers.com/redmi-note-4/xiaomi-redmi-note-4-snapdragon-roms-kernels-recoveries--other-development, and please include your device tree,kernel and vendor source to this thread.
As this is forum rule.
Click to expand...
Click to collapse
I'm truly sorry sir I posted this here by mistake, can you please delete this thread.
@sreek995 said:
I'm truly sorry sir I posted this here by mistake, can you please delete this thread.
Click to expand...
Click to collapse
Sorry, i can't move it. But you can create a new thread in that section after that contact forum administrator to vlose this thread.
Thank you.
Sent from my Xiaomi Redmi Note 4 using XDA Labs
Related
This is the works of burnsra, kalim, and mostly, the entire CyanogenMod Team. None of this is my original work, I am merely
sharing this so CM10 information can be consolidated in one thread for that specific purpose, instead of the many scattered and mislabeled threads we currently have. Again, this is none of my original work, I am just sharing CM10 for crespo4g with the community.
Links to those who have contributed-
http://forum.xda-developers.com/showthread.php?t=1403247, http://forum.xda-developers.com/showthread.php?t=1399035, http://www.cyanogenmod.com/
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.1 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 10 to the Nexus S 4G, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 10?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
Night Builds can be found here: http://get.cm/?device=crespo4g
ChangeLog: http://cm10log.appspot.com/?device=crespo4g
REMEMBER TO INSTALL GAPPS ALWAYS AFTER INSTALL AND UPDATED ROM.
For those who want to install faceunlock read this: https://plus.google.com/u/0/111722836277981844223/posts/2LthtkGD8aY
TO MAKE A CLEAN INSTALL. LOOK HERE
REPORT ISSUES ONLY IF:
You made a clean intall
You use the default kernel
You have not installed new framework
You have confirmed the issue is there with default CPU speed
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Runs nice, any chance of a link to Burns' gapps the ones that give up camera options for photo syncing ?
Excellent work.Thank you very much.
Moved to general, if you didn't build it, it doesn't belong in development
This came fast. I never tried CM much, how does it work when switching to a new nightly (or future RC/Final)? Does that work without wiping?
veyka said:
Moved to general, if you didn't build it, it doesn't belong in development
Click to expand...
Click to collapse
But now there are two threads in general about the CM10 nightly builds :/
almizilero said:
This came fast. I never tried CM much, how does it work when switching to a new nightly (or future RC/Final)? Does that work without wiping?
Click to expand...
Click to collapse
This has been around for a month. I usually just wipe cache & dalvic, then flash rom & gapps between updates, unless told to do more, or if I run into major issues.
ehiggins said:
Runs nice, any chance of a link to Burns' gapps the ones that give up camera options for photo syncing ?
Click to expand...
Click to collapse
Check the original thread for this rom.
Sent from my Nexus S 4G using Tapatalk 2
Let me get this straight. The OP made a thread to link us to another thread?
Should we use the new GAPPS, even thought they say they are for 4.2.1?
blu8503 said:
Should we use the new GAPPS, even thought they say they are for 4.2.1?
Click to expand...
Click to collapse
If you want a faulty behaviour, sure.
Sent from my Nexus S using Tapatalk 2
Nice work my friend . . . :good:
Deprecated, move to http://forum.xda-developers.com/oneplus-3/development/rom-unofficial-cyanogenmod-13-t3399089
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Official CyanogenMod Wiki:http://wiki.cyanogenmod.org/w/Main_Page
Important information:
This thread is for CyanogenMod 13.0 builds for OnePlus 3. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Features:
Now the device is mainly maintained by Grarak, Steve Kondik, Altaf Patel and me
Merged latest f2fs stable branch for linux 3.18.y, F2FS is supprted
Update kernel to linux 3.18.36
Support CDMA
Support call recording
Camera HDR mode works well
SELinux set to enforcing
Enabled cpusets
Known bugs:
No VOOC/DASH support
To be discovered
TODO:
Add kernel level color calibration support
Perf related enhancement
Installation:
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery, my TWRP is highly recommended because it supports both decryption and F2FS: http://forum.xda-developers.com/oneplus-3/development/recovery-twrp-3-0-2-0-touch-recovery-t3402999
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Optional: Install the Google Apps addon package
Reboot
Source code:
https://github.com/cyanogenmod
https://github.com/cyanogenmod/android_device_oneplus_oneplus3
https://github.com/cyanogenmod/android_kernel_oneplus_msm8996
https://github.com/TheMuppets/proprietary_vendor_oneplus
Changelog:
16/6/21:
First release with latest CM source
16/7/3:
Sync latest CM source
Update proprietary blobs
Steve pulled lots of telephony patches from CAF, he says telephony now works fine for him
Miscellaneous bug fixes and tweaks
Download:
https://s.basketbuild.com/devs/dianlujitao/oneplus3/cm13
Credits:
CyanogenMod Team
Code Aurora Forum
OnePlusOSS
ivan19871002 (graphics and camera HDR mode)
Grarak
Steve Kondik
Altaf Patel
Other CyanogenMod developers
XDA:DevDB Information
CyanogenMod, ROM for the OnePlus 3
Contributors
dianlujitao
ROM OS Version: 6.0.x Marshmallow
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 2
Beta Release Date: 2016-07-03
Created 2016-06-21
Last Updated 2016-07-03
been fan of your work on honor 4x and z9 max...good to see you here...
good job! Wonder whether the camera could be as good as the stock one
I get com.andorid.phone FC during setup stage. Cannot complete setup.
--deleted--
Volte is broke FYI.
EggZenBeanz said:
I get com.andorid.phone FC during setup stage. Cannot complete setup.
Click to expand...
Click to collapse
Maybe you have 2 sim cards, right. Remove one and try...
Good job done bro
..keep up
Sent from my TECNO W4 using Tapatalk
EggZenBeanz said:
I get com.andorid.phone FC during setup stage. Cannot complete setup.
Click to expand...
Click to collapse
Had the same problem restarted to twrp re-wiped everything and re-flashed and been smooth sailing ever since.
Are you going to add sRGB mode?
I've an issue with .mp4 files.
All work fine except .mp4 files ... mu OP3 cannot read them, all of them !
Someother with this strange issue ?
No VoLTE. Here's a logcat.
stupid ?, does the fingerprint sensor work with cm13 or just stock?
Bradl79 said:
stupid ?, does the fingerprint sensor work with cm13 or just stock?
Click to expand...
Click to collapse
Works with CM
itsLewin said:
Works with CM
Click to expand...
Click to collapse
thank you, do u know how easy it is to go back to stock OxygenOS from a nandroid backup, do u know if i need to do anything special like reflash firmware or something, since our TWRP does not back those up, thank u
Bradl79 said:
thank you, do u know how easy it is to go back to stock OxygenOS from a nandroid backup, do u know if i need to do anything special like reflash firmware or something, since our TWRP does not back those up, thank u
Click to expand...
Click to collapse
Remember to set your screen unlock to swipe before making the backup as your unock pattern wont be valid after a restore. I had this situation already twice.
Planet X said:
Remember to set your screen unlock to swipe before making the backup as your unock pattern wont be valid after a restore. I had this situation already twice.
Click to expand...
Click to collapse
Yeah I have done that too lol, other than that anything else I need to do
@dianlujitao thanks for your hard work, following it on the cmxlog Mind sharing a new build with the new kernel stuff etc?
matssa said:
@dianlujitao thanks for your hard work, following it on the cmxlog Mind sharing a new build with the new kernel stuff etc?
Click to expand...
Click to collapse
Still WIP in many fields
dianlujitao said:
Still WIP in many fields
Click to expand...
Click to collapse
Yeah I thought so ^^ But since Grarak isn't sharing any new builds (mostly because there is WIP), I though that maybe you could share yours Anyhow, I hope CM13 will sort out official builds sonn
About Lineage OS:
Lin·e·age
/ˈlinēij/
noun
lineal descent from an ancestor; ancestry or pedigree.
a sequence of species each of which is considered to have evolved from its predecessor.
Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
Warning:
If you have a repaired Nexus 5 this ROM may not boot on your device. Allegedly certain replacement display units / panels have issues with higher tick-rates. Read this thread for more information.
Instructions:
1. Download the package
2. Factory reset if coming from another ROM.
3. Install ROM
4. Install GApps (optionally) [Recommended -> Open GApps (arm64) (7.1)
Downloads:
BUILD-INFO:
20170101:Welcome lineageOS,Spammers feature "VoLTE",
Reporting Bugs:
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
NOTE:
It can take little bit extra time to boot.
In beginning of ROM(First Boot)you will face lags but use it for for a while & after using for a while you can see a difference then ROM will not lag anymore.
Ignore red lines in twrp while flashing ROM (E:unknown command [log]
Do not flash the ROM as secondary in multirom it will loop
Credits:
Me for Developing
@karthick mostwanted for everything
CAF
CyanogenMod | LineageOS
SOURCE:
why you posting it
You are not the real developer so why posting it
Remove it as soon as possible -__-
@rahul kumar this isn't your build so better take the thread off before we tag mods this builds belong to my friend prateek and he has done enough of hardwork getting volte working you are doing noting but proving yourself fool stealing someone else hardwork
chaubeyprateek said:
You are not the real developer so why posting it
Remove it as soon as possible -__-
Click to expand...
Click to collapse
dev_harsh1998 said:
@rahul kumar this isn't your build so better take the thread off before we tag mods this builds belong to my friend prateek and he has done enough of hardwork getting volte working you are doing noting but proving yourself fool stealing someone else hardwork
Click to expand...
Click to collapse
Just report the threads and move on guys, this person isn't worth wasting time on when there's a clean way out.
Sent from my YU4711 using XDA Labs
Thread closed at OP's request
Disclaimer:
Code:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this Kernel
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
LineageOS is a free, community built, aftermarket firmware distribution of Android 6 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Pretty Much Everything
Known issues:
You tell me
If you find any bugs, please post Logcats.
Instructions :
You must be using running LVM.
Reboot to recovery
Flash the latest build and GApps
Flash lineage-13.0-find5-lvm-patch.zip
Reboot
Downloads :
Unofficial weekly builds: https://mega.nz/#F!S0MWgCKJ!q6qjCc9VOZXtuvt-C_G-LQ
Google Apps: http://opengapps.org/
Credits :
All credits for this ROM go to the following:
wuxianlin: For being the one keeping this device alive
wolverine2k: For his work on the device tree
jejecule: For answering my questions
Entroy512: For his work on LVM, this device would be useless without it.
Everybody who's previously worked on the tree and kernel for this device
CyanogenMod/LineageOS Team
XDA:DevDB Information
LineageOS 13, ROM for the Oppo Find 5
Contributors
mikeysteele
Source Code: https://github.com/mikeysteele?tab=repositories
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Stable Release Date: 2017-02-25
Created 2017-02-25
Last Updated 2017-02-27
Reserved
Does this not work without LVM? Other Roms got lvm optional and work without it.
I have a modified bigger system partition and don't need a merged partition.
ApOgedoN said:
Does this not work without LVM? Other Roms got lvm optional and work without it.
I have a modified bigger system partition and don't need a merged partition.
Click to expand...
Click to collapse
It may, but I have no way of testing it so I can't be certain. If you want to try, go for it, at your own risk of course Obviously don't flash the LVM patch
Hi, i'm using your rom. It works very well but it seems i have a kind of battery drain. Also, is there a way to put screen off when device charging and shutted down (actually it shows battery charging icon and black "on")
LoveForEver said:
Hi, i'm using your rom. It works very well but it seems i have a kind of battery drain. Also, is there a way to put screen off when device charging and shutted down (actually it shows battery charging icon and black "on")
Click to expand...
Click to collapse
I'll take a look at the battery drain, as the the charging indicator thing fixing that is probably beyond my abilities I'm afraid.
Someone have working link to this build maybe... Thank you...
code:
* I am not responsible for bricked devices, dead SD cards, or any problems that may arise from flashing this ROM.
* Please do some research on custom ROMS and learn what the potential implications are and how to recover from a soft brick.
* Please do not report errors/ bugs or anything negative unless you have clean flashed.
* Encrypted and decrypted devices are supported.
* Non trusted overlays have been allowed for substratum to work but Substratum system commits will never be added.
XDA:DevDB Information
[Rom][Stable][Official] FrankenRom [Oreo 8.1][cedric], ROM for the Moto G5
Download:https://www.androidfilehost.com/?fid=818070582850508963
Contributors
Ocampo78
Source Code: https://github.com/Ocampo-78/android_device_motorola_cedric
ROM OS Version: 8.1.x Oreo
Version Information
Status: Stable
Stable Release Date: 2018-04-21
Created 2018-04-22
Last Updated 2018-04-21
Glad the download is actually working now, though I suggest including a summary of the features it has for those who have not tried it and would like to know if it's worth a flash.
Another official ROM? Nice!
What I don't understand is why it's not in the roms development section...
Exanneon said:
What I don't understand is why it's not in the roms development section...
Click to expand...
Click to collapse
It was originally posted in the Q&A section with no links then moved here
Generally roms with no details other than source code will be moved here as its not really considered development but just a rom post
Also (I believe this is still the case but haven't checked) you need a certain amount of useful posts before you can create a dev thread
can you add more informations about your ROM and screenshots?
Hey!
VoLTE is not working after reboot
Kindly help.
Amazing ROM, keep your excellent work. Put more detailed description about Franken and add topic to ROMS section!
the camera does not record
sir_overthrow said:
the camera does not record
Click to expand...
Click to collapse
This is an issue on all oreo roms, use footej (on play store).
Lol
Why does this camera work?